Manuale d’uso / di manutenzione del prodotto UBK 615 del fabbricante Precor
Vai alla pagina of 104
Pr oduct Owner ’ s Manual RBK 6 15 • UBK 6 15 Prec or Incorpor ated 20031 142nd A venue NE P .O . Box 7 202 W oodinville, W A USA 980 72 -4002 XBK 615 POM 302 217 - 101 rev A December 2012.
.
.
Edition Information UBK / RBK 615 PRODUCT OWNER ’ S MANU AL P/N 302217 - 101 rev A Copyright © December 2012 Precor Incorporated. All rights reserved. Specifications subject to change without no tice. Trademark Note Precor, AMT, EFX, and Pre va are registered trademarks of Precor Incorporated.
Important Sa f ety Instructions Importan t: Save these instru ctions for future reference. Read all instructions in the documentation provided with your ex ercise equipment, including all assembly guides, user guides, and o wner ’ s manuals, before installation of this device.
4 Product Owner's Manual Safety Preca utions Always follow basic safety precautions when using this equipment to reduce the chance of injury, fire, or damage. Other sections in this manual provide more details of safety features. Be sure to read these sections and observe all safety notices.
Important Safety Instructions 5 Care should be taken when mounting or di smounting the equipment. For Treadmills: Do not use ty ping or web surfing features while walking at speeds that exceed a slow and relaxe d leisurely pace . Always stabilize yourself by holding a stationary handle bar while using typing or web surfing features.
6 Product Owner's Manual SPACING— The below minimum spacing recommendations are based on a combination of the ASTM (U.S.) voluntary standar ds and EN (European) regulations as of October 1, 2012, for access, passage around, and emergency dismount: Treadmills— a minimum of 0 .
Important Safety Instructions 7 Maintain the equipment to keep it in good working condition, as described in the Maintena nce section of the owner ’ s manual. Inspect the equipment for incorrect, worn, or l oose components, and then correct, r eplace or tighten prior to use.
8 Product Owner's Manual Educ ating Users Take time to educate use rs about the Important Safety Instructions found in bot h the User Reference M anual and Product O wner ’ s Manual .
Important Safety Instructions 9 Regulatory Notic es for the RFID Module When equipped with a control c onsole as described in this document, this equipment may include a radio - frequency identification (RFID) module. The RFID module has been certified to operate at temperatures between - 20°C and 85°C (- 4°F and 1 85°F).
10 Product Owner's Manual Industry Canada This device complies with RSS - 210:2007 of the Spectrum Management & Telecommunicat ions Radio Standards Specification.
Important Safety Instructions 11 Regulatory Notic es for Cardiovascular Exercise Equipment The regulatory information in this s ection applies to the exercise equipment and its control console. Safety Approvals for Cardiovascular Equipment Precor equipment has been teste d and found to comply with the following applicable safety standards.
12 Product Owner's Manual Industry Canada This Class A digital apparatus complies with Canadian ICES - 003. Cet appareil nu mérique de la class e A est con forme à la no rme NMB - 003 du Canada.
Important Safety Instructions 13 Electrical Recommend ations: All Equipment Excluding Treadmills Note: This is a recommendation only. NEC (National Electric Code) guidelines or local region electric codes must be followed. For equipment fitted with a P80 console or Personal Viewing System (PVS) screen a separate power connection is required.
14 Product Owner's Manual Obtaining Service Do not attempt to service the equipment except for maintenance tasks. If any items are missing, contact your dealer. For more information regarding customer support numbers or a list of Precor authorized service centers, visit the Precor web site at http:// www.
T able of C ont ents Important Safety Instructions .................................................... 3 Safety Precautions ................................................................................ 4 Educating Users ...........................
16 Product Owner's Manual.
Chapter 1 Pr oduct F ea tur es This section is designed t o show you how to customize the eq uipment for your users and view us eful product information.
18 Product Owner's Manual Table 1. Cus tom feat ures and s ettings for your fit ness equi pment Equipment Programming Prompt Factory Default Setting Features you c an change All * SELECT LANGUAGE English Select one language for your user. All * SELECT UNITS U.
Product Features 19 Programming Tips Always start at the Precor banner. Electrical power must be supplied. For self - pow ered equipment, a constant power sourc e is available if you use the optional power adapter. Otherwise, users have to maintain the minimum rate of motion.
20 Product Owner's Manual Changing the Product Settings You must be in the Programming mode before you can change the settings. To access the progra mming mode: 1.
Produc t Features 21 Table 2. Programming mode keys Key Descripti on ▲ or ▼ Navigational arrows: Move you through the menu and can also be used to increase or decrease time units. OK Press to choose o r accept the dis played selection. Nu mber keypad CLEAR Returns user to the previous menu level without saving changes.
22 Product Owner's Manual Use the following flowchart t o navigate through the menu settings. Figure 3 : Bike m enu se tting s Choosing a Language The equipment can display user prompts, text, and user entries in several different languages. When the equipment is shipped from the factory, the default language is English.
Product Features 23 Selecting a U.S. Standard or Metric Display The equipment can display measurements in either Metric or U.S. Standard. The defa ult factory setting is U.S. Standard. To change the display measurement : 1. At the SEL ECT UNITS prompt, press OK.
24 Product Owner's Manual Setting a Pause Time Limit You can limit how long a user can pause while exercising on the equipment by entering a time between 1 and 120 seconds (two minutes).
Product Features 25 Setting a Resistance R ange The bike resistance levels are low, medium, and high. Within each setting, 25 levels of resistance are available, but the chosen setting affects the overall resistance range. To set a resistance range: 1.
26 Product Owner's Manual Informational Displays Use the information displa ys to locate information about equipment use (odometer and hour meter), software versions and part numbers, serial number, usage log, and error log. In general, you would only access this information if directed to do so by Precor Customer Support.
Product Features 27 Note: The C LEAR key is located on the number keypad. If your product has a PAUSE/RESET ke y, use it in place of the RESET key called out in the flowchart.
28 Product Owner's Manual Table 4. Informational D isplays for all pro ducts Product Displ ay Desc ription All HOUR METER • The number of hours that the equipment has been in u se. • The equipment tracks th e elapsed minutes, but the value that appears is truncate d to the nearest full hour.
Product Features 29 Product Displ ay Desc ription All ERROR LOG Displays any e rror co des that may have been detected by th e software. All ODOMETER The odometer value correlates t o the type o f Precor produ ct and the standard o f units , U.S. or Me tric, selected in the programs .
30 Product Owner's Manual Erasing the Error Log When you no longer need the error l og information, you can erase the entries. To erase the error log entries: 1.
Chapter 2 Educating Users This console offers an easy- to - follow displa y and multiple programs to help users meet their workout needs. The keypad lets them select data and control their workout session and S martRate® provides a visual aid that monitors heart rate and workout intensity at a glance.
32 Product Owner's Manual Using SmartRate® The Precor SmartRate® technology is a precise, easy - to - read heart rate monitor that helps users achieve their best personalized workouts. SmartR ate displays actual heart rate information in relat ion to the user ’ s target zone for weight loss and cardiovascular training.
Chapter 3 Displa y Console The display console is designed for ease of use. Use the following graphic and ta ble to learn more about the console displays.
34 Product Owner's Manual Table 5. Parts of the display cons ole Number Description HEART RATE dis play : Use a chest strap or grasp both touch - sensitive grips to display and monitor your pulse. Center dis play : Initially shows the Precor banner.
Display Console 35 Using the Upper Display The program profile suppli es information about your programmed workout. A blinking segment in the profile indicates your position.
36 Product Owner's Manual PRO GRAMS Keypad The PROGRAMS keypad provides access to all t he exercise programs. To use th e program k eypad: 1. Press the center of the key to view the top level program in its menu. 2. Press the OK key to confirm your selection.
Display Console 37 Number Keypad The number keypad has several functions depending on what is connected to the equipment. Table 7. Connections Connection Descripti on Computer (CSAFE compatible) If a computer is attached to the CSAFE connection on the equipment, the number keypad le ts you enter your user ID and answer other setup prompts.
38 Product Owner's Manual The CLEAR and ENTER keys provide the following functions: CLEAR: Use the CLEAR key to remove the last num ber being displayed.
Chapter 4 W ork out Options CAUTION: B efore beg inning any fitness p rogram, se e your physician fo r a com plete phy sical exam ination. Know yo ur physici an - recommended he art rate target zone. To begin y our worko ut: 1. Face the display. 2. Hold on to a handlebar and step on the foot peda ls.
40 Product Owner's Manual Choosing QUICKSTA RT Use the Quickstart feature to begin an immediate workout. To use this feat ure: 1. Begin pedaling. 2.
Workout Options 41 Selecting a Program 1. While the Precor banner scrolls, press a PROGRAMS key, and then press OK. 2. A time prompt blinks in the display. Use the navigational arrow keys or the number keys to adjust the minutes (1 – 240) and then press OK.
42 Product Owner's Manual Storing Wo rkout St atistics In some fitness facilities, Preco r equipment is connected to a computer so that you can easi ly retrieve your workout statistics and determine how well you are meeting your fitness goals.
Workout Options 43 Changing Programs in Mid -session You can change programs in the middle of a session by s electing a new program from the PROGRAMS key menu and pressing OK. All ac cumulated statistics are tra nsferred to the new program as you continue exercising.
44 Product Owner's Manual Pausing During a Workout or th e Cool - Down Period If your rate of motion drops below minimum requirements while exercising or during the cool down period, a 30 - second shutdown is initiat ed.
Chapter 5 Pr og r ams This section describes the p rograms available on the equipment. Use the following table to learn more about each workout program.
46 Product Owner's Manual Graphic Program He ading Workout Det ails Manual This workout begins as a flat line. You can increase or decrease the resistance using t he resistance key. The workout profile reflects changes yo u make an d a bli nki ng light in the column indicates your position in t he workout.
Programs 47 Program Tips Begin at the Precor banner a nd choose a program by pressing a PROGRAMS key or QUICKSTART. While exercising, you need to sustain your exercise motion. Stopping any movement caus es the equipm ent to shut down to conserve battery po wer.
48 Product Owner's Manual Notes:.
.
Pr oduct Owner ’ s Manual RBK 6 15 • UBK 6 15 Prec or Incorpor ated 20031 142nd A venue NE P .O . Box 7 202 W oodinville, W A USA 980 72 -4002 XBK 615 POM 302 217 - 101 rev A December 2012.
As sembling and Maintaining the RBK 6 15 R ecumbent Ex er cise Bik e Prec or Incorpor ated 20031 142nd A venue NE P .O . Box 7 202 W oodinville, W A USA 980 72 -4002 RBK 615 P AG/ OM 30 2216- 101 r ev.
.
.
Edition Information ASSEMBLING AND MAI NTAINING THE RBK 615 RECUMBENT EXERCISE BIKE P/N 302216 - 101 rev A Copyright © December 2012 Precor Incorporated. All rights reserved. Specifications subject to change without notice. Trademark Note Precor, AMT, EFX, and Pre va are registered trademarks of Precor Incorporated.
Important Sa f ety Instructions Importan t: Save these instru ctions for future reference. Read all instructions in the documentation provided with your exercise equipment, including all assembly guides, user guides, and o wner ’ s manuals, before installation of this device.
4 Assembling and Maintaining the RBK 615 Recumbent Exercise Bi ke Safety Preca utions Always follow basic safety precautions when using this equipment to reduce the chance of injury, fire, or damage. Other sections in this manual provide more details of safety features.
Important Safety Instructions 5 Care should be taken when mounting or di smounting the equipment. For Treadmills: Do not use ty ping or web surfing features while walking at speeds that e xceed a slow and relaxed leisurely pace . Always stabilize yourself by holding a stationary handle bar while using typing or web surfing features.
6 Assembling and Maintaining the RBK 615 Recumbent Exercise Bi ke SPACING— The below minimum spacing recommendations are based on a combination of the ASTM (U.S.) voluntary standar ds and EN (European) regulations as of October 1, 2012, for access, passage around, and emergency dismount: Tr eadmills— a minimum of 0.
Important Safety Instructions 7 Maintain the equipment to keep it in good working condition, as described in the Maintena nce section of the owner ’ s manual. Inspect the equipment fo r incorrect, worn, or loose components, and then correct, replace or tighten prior to use.
8 Assembling and Maintaining the RBK 615 Recumbent Exercise Bi ke Educating Users Take time to educate use rs about the Important Safety Instructions found in bot h the User Reference M anual and Product O wner ’ s Manual .
Important Safety Instructions 9 Regulatory Notic es for the RFID Module When equipped with a control c onsole as described in this document, this equipment may include a radio - frequency identification (RFID) module. The RFID module has been certified to operate at temperatures between - 20°C and 85°C (- 4°F and 1 85°F).
10 Assembling and Maintai ning the RBK 615 Recumbent Exercise Bike Industry Canada This device complies with RSS - 210:2007 of the Spectrum Management & Telecommunicat ions Radio Standards Specification.
Important Safety Instructions 11 Regulatory Notic es for Cardiovascular Exercise Equipment The regulatory information in this section applies to the exercise equipment and its control console. Safety Approvals for Cardiovascular Equipment Precor equipment has been teste d and found to comply with the following applicable safety standards.
12 Assembling and Maintai ning the RBK 615 Recumbent Exercise Bike Industry Canada This Class A digital apparatus complies with Canadi an ICES - 003. Cet appareil nu mérique de la class e A est con forme à la no rme NMB - 003 du Canada.
Important Safety Instructions 13 Electrical Recommend ations: All Equipment Excluding Treadmills Note: This is a recommendation only. NEC (National Electric Code) guidelines or local region electric codes must be followed. For equipment fitted with a P80 console or Personal Viewing System (PVS) screen a separate power connection is required.
14 Assembling and Maintaining t he RBK 615 Recumbent Exercise Bi ke Obtaining Service Do not attempt to service the equipment except for maintenan ce tasks. If any items are missing, contact your dealer. For more information regarding customer support numbers or a list of Precor authorized service centers, visit the Precor web site at http:// www.
T able of C ont ents Important Safety Instructions .................................................... 3 Safety Precautions ................................................................................ 4 Educating Users ...........................
16 Assembling and Maintaining t he RBK 615 Recumbent Exercise Bi ke Self - Powered Features .............................................................. 41 Informati onal Disp lays Pri or to S hutdown .................................. 42 Symptoms of a Low Batter y .
Chapter 1 As sembling the Ex er cise Bik e Importan t: The instruc tions in the follow ing procedu res are described f rom the perspective o f a person stan ding directly i n front of the equ ipment (that is, o n the opp osite side of the control con sole from a perso n using th e equipment).
18 Assembling and Maint aining the RBK 615 Recumbent Exercise Bike Unpacking the Equip ment The shipping container for this exercise bike consists of the following items: Wooden pallet Car dboard base Cardboard cover Foam sp acers WARNING Do not atte mpt to mo ve the e quipment o ff of the pallet b y yourse lf.
Assembling the Exercise Bike 19 Hardware Kit (not to sc ale) Before you begin the assembly, verify that the following hardware items are packed with the equipment.
20 Assembling and Maintaining the RBK 615 Recumbent Exercise Bike Required Tools 6 mm hex wrench 10 mm hex wrench ⁵₃₂ - inch hex wrench 13 mm open - end, box, or socket wrench.
Assembling the Exercise Bike 21 2. Secure the rear stabilizer using two M10 x 40 mm button head screws. Tighten the screws completely using a 6 mm hex wrench. Figure 3 : Rear stabilizer attachm ent 3. Place the front stabilizer underneath the br acket at the front of the bike.
22 Assembling and Maintaining the RBK 615 Recumbent Exercise Bike 4. Secure the front stabiliz er using two M10 x 40 mm buttonhead screws. Tight en the s crews completely using a 6 mm hex wrench.
Assembling the Exercise Bike 23 Attaching the Sea t Back and Bottle Holder While the equipment is in use, the se at back flexes to support users of different shapes and sizes. Underneath the seat back, the bottle holder acc ommodates both left- handed and right - handed users.
24 Assembling and Maintaining the RBK 615 Recumbent Exercise Bi ke 3. Swing the seat back assembly int o place so that its four screw holes line up with the holes on the seat carriage bracket, as shown in the following fi gure. Figure 7 : Posit ioning the s eat back assembly 4.
Assembling the Exercise Bike 25 5. Adjust th e position of the sea t back, th en tighten the screws completely using a 6 mm hex wren ch. 6. Connect the heart rate sensor c able in the handlebars to the cable you passed through the s eat back support earlier, then position the handlebars in the handlebar bracket as shown in the following figure.
26 Assembling and Maintaining the RBK 615 Recumbent Exercise Bi ke To attach the bottle h older: 1. Move the seat a s far bac k as it can go. 2. Position the bottle holder so that t he two tabs on its underside are aligned with the bottle holder bracket.
Assembling the Exercise Bike 27 Installing the Upright Support and Cables DANGER Do no t attempt to connect e lectrical pow er until all assemb ly procedures are complete and the console is properly i nstalled .
28 Assembling and Maintaining the RBK 615 Recumbent Exercise Bi ke 7. Lift the upright support and pos ition its lower end over the upright support channel on the body assembly. Slide the support into positi on so that its screw holes line up with the corre sponding holes on the body assembly, as shown in the following figure.
Assembling the Exercise Bike 29 8. Insert the two M12 x 80 mm sockethead screws through the openings on the support and into the screw holes on the body assembly.
30 Assembling and Maintaining the RB K 615 Recumbent Exercise Bike Making Su re the Uni t Is Stable Make sure the unit is level before allowing anyone to use it. CAUTION: To eliminate moveme nt, make sure the ad justable feet are in con tact with t he floor.
Assembling the Exercise Bike 31 Installing the C onsole Before you begin, make sure that the cables have been fed through the mounting bracke t and their ends extend throu gh the round opening at the base of the bracket.
32 Assembling and Maintaining the RBK 615 Recumbent Exercise Bike 3. Retr ieve the serial number label you removed from the body assembly earlier. Remove the backing from the label and apply it inside the console at the upper right, as shown in the following figure.
Assembling the Exercise Bike 33 4. Route the flat, black base unit data cable to the left of the mounting bracket and about t hree-quarters of the way up the left side of the console, as s hown in the followi ng figure. Attach the base unit data cable to the eight - conductor modular jack labeled LOWER BOARD CONNECTION.
34 Assembling and Maintaining the RBK 615 Recumbent Exercise Bike 6. Insert four ¹₄ - inch x ³₄ - inch buttonhead screws through the screw holes in the tabs on the mounting br acket and into the screw anchors on the c onsole. Tighten the screws completely using a ⁵₃₂ - inch hex wrench.
Assembling the Exercise Bike 35 8. Position the back cover and atta ch the four 1- inch panhead machine screws, then tighten the screws compl etely using a #2 Phillips screwdriver.
36 Assembling and Maintaining the RBK 615 Recumbent Exercise Bike Breaking in the Equip ment Precor equipment does not require an actual break - in period. How ever, moving components such as belts, gears, and bearings can settle while the equipment is being stored or shipped.
Chapter 2 Maint enanc e To k eep the equipment functioning properly, perform the minor maintenance tasks in this section at the intervals shown on the maintenance checklist. Failure to maintain the equipment as described in this section could void the Precor Limited Warranty.
38 Assembling and Maintaining the RB K 615 Recumbent Exer cise Bike Alternatively, you can clean the equipment with Athletix fitness equipment cleaning wipes (for more information, visit www.
Maintena nce 39 Quarterly Ma intenance Precor rec ommends that you clean and inspect the equipment more thoroughly once every three months. To perfor m quarterly ma intenanc e: 1.
40 Assembling and Maintaining the RB K 615 Recumbent Exer cise Bike Moving the Equi pment The equipment is very heavy. If you plan to move it t o a new location, obtain t he help of an adult a ssistant and us e proper lifting techniques.
Chapter 3 Self- Po w er ed Fe atur es Important : This chapter of the manual d escribes Precor fitness equipme nt that can ope rate wit hout being connected t o AC power. T his includes units equ ipped with P30 or P10 consoles. However, P80 co nsoles must be c onnected to A C power throu gh their power s upplies to oper ate.
42 Assembling and Maintaining the RBK 615 Recumbent Exercise Bike Informationa l Displays Prior to Shut down The equipment saves its battery charge by moving into a shutdown mode. If the user does not mainta in the minimum rate of motion, a 30- second shutdown proce ss begins.
Self- Powered Features 43 Using the Optional Po wer Adapter After connecting t he power adapter to the equipment, pl ug the opposite end into the appropriate power source (120 V or 240 V). CAUTION: W hen the o ptional po wer ada pter is in use, mak e sure that the pow er supp ly cord doe s not cre ate a safety hazard.
44 Assembling and Maintaining the RBK 615 Recumbent Exercise Bike Replacing the Battery The equipment ’ s battery is built to last for a long time. However, if you feel that the battery may need replacing, check with an authoriz ed service technician.
Chapter 4 Comme r cial Car dio v ascular E quipment Li mit ed W arr anty PLEASE READ THESE W ARRANTY TERMS AND CONDITIONS CAREFUL LY BEFORE USING YOUR PRE COR INCORPORAT ED PRODUCT. BY U SING THE EQUI PMENT, YOU ARE CONSENTING TO BE BO UND BY THE FOLLOWING WARRANTY TERMS AND CONDITIONS .
46 Assembling and Maintaining the RBK 615 Recumbent Exercise Bike Options / Accesso ries Many options or acc essories have comp onents that are connect ed internally or mount ed i nside the electronic c onsole. The following guidelines determine the war ranty for these components.
Commercial Cardiovascular Equipm ent Limited Warranty 47 This Limited Warranty shall not apply to: 1. Software ver sion upgrade s. 2. Software defe cts that do not materially and negatively affe ct the normal p erformance of the product under nor mal conditions of us e.
48 Assembling and Maintaining the RBK 615 Recumbent Exercise Bike EXCLUSION OF CONSEQUENTIAL AND INCIDENTAL DAMAGES. PRECOR AND/OR ITS SUPPLIERS SH ALL HAVE NO OBLIGATION OR LIABILITY, WHETHER ARI SIN.
.
As sembling and Maintaining the RBK 6 15 R ecumbent Ex er cise Bik e Prec or Incorpor ated 20031 142nd A venue NE P .O . Box 7 202 W oodinville, W A USA 980 72 -4002 RBK 615 P AG/ OM 30 2216- 101 r ev.
Un punto importante, dopo l’acquisto del dispositivo (o anche prima di acquisto) è quello di leggere il manuale. Dobbiamo farlo per diversi motivi semplici:
Se non hai ancora comprato il Precor UBK 615 è un buon momento per familiarizzare con i dati di base del prodotto. Prime consultare le pagine iniziali del manuale d’uso, che si trova al di sopra. Dovresti trovare lì i dati tecnici più importanti del Precor UBK 615 - in questo modo è possibile verificare se l’apparecchio soddisfa le tue esigenze. Esplorando le pagine segenti del manuali d’uso Precor UBK 615 imparerai tutte le caratteristiche del prodotto e le informazioni sul suo funzionamento. Le informazioni sul Precor UBK 615 ti aiuteranno sicuramente a prendere una decisione relativa all’acquisto.
In una situazione in cui hai già il Precor UBK 615, ma non hai ancora letto il manuale d’uso, dovresti farlo per le ragioni sopra descritte. Saprai quindi se hai correttamente usato le funzioni disponibili, e se hai commesso errori che possono ridurre la durata di vita del Precor UBK 615.
Tuttavia, uno dei ruoli più importanti per l’utente svolti dal manuale d’uso è quello di aiutare a risolvere i problemi con il Precor UBK 615. Quasi sempre, ci troverai Troubleshooting, cioè i guasti più frequenti e malfunzionamenti del dispositivo Precor UBK 615 insieme con le istruzioni su come risolverli. Anche se non si riesci a risolvere il problema, il manuale d’uso ti mostrerà il percorso di ulteriori procedimenti – il contatto con il centro servizio clienti o il servizio più vicino.
