Manuale d’uso / di manutenzione del prodotto PT780 del fabbricante Pelco
Vai alla pagina of 24
PT780 Legacy ® Series Pan/Tilts Installation/ Operation Manual C342M-D (8/05) Pelco • 3500 Pelco Way, Clovis • CA 93612-5699 USA • www.pelco.com In North America and Canada: Tel (800) 289-9100 .
2 Pelco Manual C342M-D (8/05) CONTENTS Section Page 1.0 GENERAL .................................................................................................. 5 1.1 IMPORT ANT SAFEGUARDS AND WARNINGS ............................... 5 2.0 DESCRIPTION .
Pelco Manual C342M-D (8/05) 3 LIST OF ILLUSTRA TIONS Figur e Page 1 Removing the Screws ........................................................................ 8 2 Releasing the Covers .................................................................
(This page intentionally left blank.) 4 Pelco Manual C342M-D (8/05).
Pelco Manual C342M-D (8/05) 5 Please thoroughly familiarize yourself with the information in this manual prior to installation and operation. 1.0 GENERAL 1.1 IMPORT ANT SAFEGUARDS AND W ARNINGS Prior to installation and use of this product, the following W ARNINGS should be observed.
6 Pelco Manual C342M-D (8/05) 2.0 DESCRIPTION The PT780 Legacy ® Series pan/tilt units are designed for medium, indoor/outdoor use. Only Legacy Series enclosures can be mounted on the pan/tilt units. These enclo- sures are the EH4700L and EH5700L environmental enclosures and the EH8106L pressurized enclosure.
Pelco Manual C342M-D (8/05) 7 3.0 INST ALLA TION 3.1 MOUNTING Attach the pan/tilt unit to a wall or ceiling mount. Follow the instructions that are provided with the mount. Make sure the mounting surface and the selected mount can support four times the combined weight of the pan/tilt unit and the camera enclosure (including the camera and lens).
8 Pelco Manual C342M-D (8/05) 3.2 P AN AND TIL T LIMIT STOP ADJUSTMENTS 1. Remove the covers. a. Refer to Figure 1 and remove the Phillips screw on each side of the pan/ tilt unit. b. Refer to Figure 2 and place your hands under the cover halves. Exert a strong, upward force to release the covers from their internal latching devices.
Pelco Manual C342M-D (8/05) 9 2. Adjust the tilt limit stops. Refer to Figure 5 for the location of the tilt limit stops. The tilt limit stop closest to the front of the pan/tilt unit limits the downward movement. The tilt limit stop closest to the back of the pan/tilt unit limits the upward movement.
10 Pelco Manual C342M-D (8/05) 3.3 ENCLOSURE INST ALLA TION Attach the camera enclosure to the pan/tilt unit. Follow the instructions that are provided with the enclosure.
Pelco Manual C342M-D (8/05) 11 Refer to Figure 9 and the following steps to construct the cable: 1. Slide the unshielded and coaxial cables through the cable shell and rubber boot. 2. Strip one inch of the jacket from the cables. 3. For the unshielded conductors, strip 1/8 inch of insulation from the individual wires.
12 Pelco Manual C342M-D (8/05) Figure 10. Wiper On/Off Connection.
Pelco Manual C342M-D (8/05) 13 Pin # Function PT780P PT780P/PP PT780-SL PT780-SL/PP PT780-24P PT780-24P/PP PT780-24SL PT780-24SL/PP PT780-VS PT780-VS/PP PT780-VSSL PT780-VSSL/PP Coaxial Cable 27/4 Vid.
14 Pelco Manual C342M-D (8/05) Pin # Function PT780P PT780P/PP PT780-SL PT780-SL/PP PT780-24P PT780-24P/PP PT780-24SL PT780-24SL/PP PT780-VS PT780-VS/PP PT780-VSSL PT780-VSSL/PP Coaxial Cable 27/4 Vid.
Pelco Manual C342M-D (8/05) 15 T able B. Requirements to Wire Power to Pan and T ilt Motors Maximum Cable Length* Wire Size 6 Conductors** 7 Conductors*** 5 Conductors**** 120 V AC PT780P Models 20 A .
16 Pelco Manual C342M-D (8/05) T able C. Maximum Cable Distances Using RB24 or RB1 15 Relay Boxes RELA Y BOX CONTROL A B REQUIRED EXTERNAL POWER SUPPL Y Wire Size Maximum “A” Maximum “B” Dista.
Pelco Manual C342M-D (8/05) 17 T able D. Requirements to Wire Power to Camera Enclosure Option Power HB1 120 V AC (40 watts) HB2 24 V AC (40 watts) HB3 230 V AC (40 watts) T able E.
18 Pelco Manual C342M-D (8/05) T able F . 24 V AC Wiring Distances Chart Wire Gauge Maximum distance from transformer to load The following are the recommended maximum distances for 24 V AC applications and are calculated with a 10-percent voltage drop.
Pelco Manual C342M-D (8/05) 19 4.0 OPERA TION Refer to the manual for your control equipment for operating the pan/tilt unit. If your enclosure has the heater blanket option, it is thermostatically controlled to turn on at 40 ° F (4.44 ° C) and turn off at 60 ° F (15.
20 Pelco Manual C342M-D (8/05) 5.0 MAINTENANCE If you need to remove the enclosure, protect the RediLINK™ connector area against moisture, dust, dirt, etc. Failure to do so could result in a bad connection. Also, damage to the pan/tilt unit or enclosure could occur when power is turned on.
Pelco Manual C342M-D (8/05) 21 (2) Using a screwdriver , pry the motor down at H to tighten for the cor- rect chain tension. (Y ou should not be able to freely move the motor with your finger , nor should it be so tight that it will not move at all as this usually leads to binding.
22 Pelco Manual C342M-D (8/05) 6.0 SPECIFICA TIONS Specifications apply to all models unless specified otherwise. MECHANICAL Pan Rotation: Movement in horizontal plane: 0-355 ° 0-360 ° (SL models on.
Pelco Manual C342M-D (8/05) 23 Figure 12. PT780 Series Dimension Drawing 1 1.10 (28.1 9 ) .70 (1.78) PELCO 8.50 (21.5 9 ) 9 .60 (24.38) Ø 4.00 (10.16) Ø 3.50 (8.8 9 ) 1/4-20 D&T X .50 (1.27) USABLE THREAD DEPTH EQUALL Y SP ACED ON A 2.25 (5.72) B.
24 Pelco Manual C342M-D (8/05) 7.0 W ARRANTY AND RETURN INFORMA TION ® Pelco, the Pelco logo, Spectra, Esprit, Genex, Legacy , and Camclosure are registered trademarks of Pelco. ™ Endura and ExSite are trademarks of Pelco. © Copyright 2005, Pelco.
Un punto importante, dopo l’acquisto del dispositivo (o anche prima di acquisto) è quello di leggere il manuale. Dobbiamo farlo per diversi motivi semplici:
Se non hai ancora comprato il Pelco PT780 è un buon momento per familiarizzare con i dati di base del prodotto. Prime consultare le pagine iniziali del manuale d’uso, che si trova al di sopra. Dovresti trovare lì i dati tecnici più importanti del Pelco PT780 - in questo modo è possibile verificare se l’apparecchio soddisfa le tue esigenze. Esplorando le pagine segenti del manuali d’uso Pelco PT780 imparerai tutte le caratteristiche del prodotto e le informazioni sul suo funzionamento. Le informazioni sul Pelco PT780 ti aiuteranno sicuramente a prendere una decisione relativa all’acquisto.
In una situazione in cui hai già il Pelco PT780, ma non hai ancora letto il manuale d’uso, dovresti farlo per le ragioni sopra descritte. Saprai quindi se hai correttamente usato le funzioni disponibili, e se hai commesso errori che possono ridurre la durata di vita del Pelco PT780.
Tuttavia, uno dei ruoli più importanti per l’utente svolti dal manuale d’uso è quello di aiutare a risolvere i problemi con il Pelco PT780. Quasi sempre, ci troverai Troubleshooting, cioè i guasti più frequenti e malfunzionamenti del dispositivo Pelco PT780 insieme con le istruzioni su come risolverli. Anche se non si riesci a risolvere il problema, il manuale d’uso ti mostrerà il percorso di ulteriori procedimenti – il contatto con il centro servizio clienti o il servizio più vicino.