Manuale d’uso / di manutenzione del prodotto C554M-A (5/98) del fabbricante Pelco
Vai alla pagina of 28
CX9000 Series Coaxitron ® Receiver/Driver Installation/ Operation Manual C554M-A (5/98) Pelco • 300 W. Pontiac Way, Clovis • CA 93612-5699 USA • Pelco Online @ http://www.
2 Pelco Manual C554M-A (5/98) CONTENTS Section Page 1.0 GENERAL .................................................................................................. 5 1.1 IMPORT ANT SAFEGUARDS AND W ARNINGS ............................... 5 1.2 REGULA TOR Y NOTICES .
Pelco Manual C554M-A (5/98) 3 REVISION HISTORY Manual # Date Comments C554M 4/95 Original version. 8/96 Changed fusing values for fuse #F1, Figure 1. 8/97 Changed fusing values for fuse #F2, Figure 1 per ECO# 93-362. C554M-A 5/98 Rev A. Changed manual to new format and manual pagination.
4 Pelco Manual C554M-A (5/98) (This page intentionally left blank.).
Pelco Manual C554M-A (5/98) 5 Please thor oughly familiarize yourself with the information in this manual prior to installation and operation. 1.0 GENERAL 1.1 IMPORT ANT SAFEGUARDS AND W ARNINGS Prior to installation and use of this product, the following WARNINGS should be observed.
6 Pelco Manual C554M-A (5/98) 1.2 REGULA TOR Y NOTICES NOTE: This equipment has been tested and found to comply with the limits of a Class B digital device, pursuant to part 15 of the FCC rules. These limits are de- signed to provide reasonable protection against harmful interference in a residen- tial installation.
Pelco Manual C554M-A (5/98) 7 2.0 DESCRIPTION The Coaxitron ® receiver/driver operates on the principle of transferring control in- formation and video on the same line. A train of pulses containing control informa- tion is superimposed on the video at VIS time.
8 Pelco Manual C554M-A (5/98) 2.1 MODELS Outdoor CX9024RX Coaxitron ® outdoor receiver for 24 VAC pan/tilts with power supply for pan/tilt, zoom lens, 24 VAC camera power.
Pelco Manual C554M-A (5/98) 9 2.2 CERTIFICA TIONS The products identified below have been tested and certified for agency compli- ance as noted below. Agency Compliance Certification Model CE FCC UL C.
10 Pelco Manual C554M-A (5/98) 3.0 INST ALLA TION 3.1 MOUNTING THE CX9000 1. Determine the location where the CX9000 is to be installed. 2. Using the CX9000 box as a template, mark the hole pattern on the mounting surface. Drill holes in the mounting surface.
Pelco Manual C554M-A (5/98) 11 3.3 CONNECTOR ASSEMBL Y Assemble the connector parts according to the instructions below . Detail B, in Fig- ure 1, reflects the pin arrangement specific to the CX9000 Series receiver/drivers. Refer to Figures 1 and 2 during assembly .
12 Pelco Manual C554M-A (5/98) Figure 1. Connector Assembly OR 1" ( 2.54 cm) 1/8" (0.318 cm) FRONT VIEW 1 4 5 9 15 10 22 16 28 23 33 29 37 34 37-PIN.
Pelco Manual C554M-A (5/98) 13 Figure 2. Receiver Control Output/Input Pin Assignments P1 3 BRN P/T COM 1 5 ORG LEFT 3 8 4 7 GRN DOWN 5 6 BLU UP 6 4 VIO RIGHT 7 9 GRA Y GROUND 8 12 BLACK IRIS 10 1 1 1.
14 Pelco Manual C554M-A (5/98) 3.3.1 Receiver Control Output for 12 VDC Camera Option The usual output for camera power is 24 V AC, accessed at pins 9 and 14 of the 37- pin AMP connector (see T able C) where camera AC (high) and camera AC (low) emerge as camera input power .
Pelco Manual C554M-A (5/98) 15 T able B. SB1900, SS2000 and SB2600 Series Preset Wiring Pinouts Coaxitron ® Receiver SB2600-PP and SB2600SL-PP SB1900-PP, SB1900SL-PP, Preset Unit Only SS2000-PP and S.
16 Pelco Manual C554M-A (5/98) Coaxitron ® Receiver Preset Position Pan/Tilts Preset Position Pan/Tilts PT280, Preset Unit Only PT520, PT550, PT570 and PT680 Series and SB2800 Series Domes/ PT1250 Se.
Pelco Manual C554M-A (5/98) 17 Coaxitron ® Receiver Preset Position Lenses Preset Unit Only 37-pin 9-pin Connector Function Connector Function 1 Pan/Tilt Common 1 Iris 2 Manual Iris 2 Zoom 3 Pan Left.
18 Pelco Manual C554M-A (5/98) 3.5 AUXILIARY FUNCTIONS The Coaxitron ® receiver , using a Revision J or newer receiver/driver PC board, is capable of operating up to four remotely activated auxiliary functions. Each auxil- iary output may be individually converted at the receiver for momentary or latching operation.
Pelco Manual C554M-A (5/98) 19 Figure 6. External Device W iring Diagram Figure 5. Auxiliary Functions Wiring Diagram 1 2 3 8 MANUAL IRIS GROUND COAXITRON ® RECEIVER/DRIVER 37-PIN + 12 VDC NORMALL Y .
20 Pelco Manual C554M-A (5/98) 3.6 POWER There is no on/off switch. The CX9000 is “hot” when the fuse is installed and the input wiring is connected. Refer to T able E for the recommended maximum distances when wiring 24 V AC applications. Refer to Figure 7 for AC input configurations and recommended fuse values.
Pelco Manual C554M-A (5/98) 21 Figure 7. AC Input and Fuse V alues F3 F2 F1 POWER OUTPUT INPUT P/T VAC VAC CX9024RX CX9024RXI *12VDC Camera options use a 1/2ASB fuse value in this position in place of the 2/10's value.
22 Pelco Manual C554M-A (5/98) 4.0 OPERA TION 4.1 Preset Power-up Routine When a pre-position Coaxitron ® receiver is first powered up, it goes through a rou- tine that orients itself to the pan/tilt and lens connected to it. The routine first automatically operates the lens zoom and focus functions.
Pelco Manual C554M-A (5/98) 23 5.0 TROUBLESHOOTING GIT100 Ground Isolation T ransformer Although Coaxitron ® receiver/drivers are immune to transient or surge disturbances, their performance can be impaired when there are large ground loop voltages be- tween associated controllers and the receiver/driver .
24 Pelco Manual C554M-A (5/98) 7.0 SPECIFICA TIONS MECHANICAL Latching Fiberglass Box: Two latches (accommodates padlocks - not supplied) Anodized Metal Box: No latches.
Pelco Manual C554M-A (5/98) 25 NOTE : VALUES IN PARENTHESES ARE CENTIMETERS; ALL OTHERS ARE INCHES Figure 8. CX9000 Series Dimension Drawing (Fiberglass Box) Weight (typical) Unit Shipping Fiberglass Box: 6 lb (2.72 kg) 8 lb (3.63) Anodized Metal Box: 6 lb (2.
26 Pelco Manual C554M-A (5/98) 6.00 (15.24) 9.01 (22.89) 9.90 (25.15) 1 1.01 (27.97) 1 1.50 (29.21) 4.77 (12.12) 12.25 (31.12) 12.62 (32.05) 4.77 (12.12) Figure 10.
Pelco Manual C554M-A (5/98) 27 NOTES.
28 Pelco Manual C554M-A (5/98) 8.0 W ARRANTY AND RETURN INFORMA TION WARRANTY Pelco will repair or replace, without charge, any merchandise proved defective in material or workmanship for a period of one year after the date of shipment. Excep- tions to this warranty are as noted below: • Three years on Genex™ Series multiplexers.
Un punto importante, dopo l’acquisto del dispositivo (o anche prima di acquisto) è quello di leggere il manuale. Dobbiamo farlo per diversi motivi semplici:
Se non hai ancora comprato il Pelco C554M-A (5/98) è un buon momento per familiarizzare con i dati di base del prodotto. Prime consultare le pagine iniziali del manuale d’uso, che si trova al di sopra. Dovresti trovare lì i dati tecnici più importanti del Pelco C554M-A (5/98) - in questo modo è possibile verificare se l’apparecchio soddisfa le tue esigenze. Esplorando le pagine segenti del manuali d’uso Pelco C554M-A (5/98) imparerai tutte le caratteristiche del prodotto e le informazioni sul suo funzionamento. Le informazioni sul Pelco C554M-A (5/98) ti aiuteranno sicuramente a prendere una decisione relativa all’acquisto.
In una situazione in cui hai già il Pelco C554M-A (5/98), ma non hai ancora letto il manuale d’uso, dovresti farlo per le ragioni sopra descritte. Saprai quindi se hai correttamente usato le funzioni disponibili, e se hai commesso errori che possono ridurre la durata di vita del Pelco C554M-A (5/98).
Tuttavia, uno dei ruoli più importanti per l’utente svolti dal manuale d’uso è quello di aiutare a risolvere i problemi con il Pelco C554M-A (5/98). Quasi sempre, ci troverai Troubleshooting, cioè i guasti più frequenti e malfunzionamenti del dispositivo Pelco C554M-A (5/98) insieme con le istruzioni su come risolverli. Anche se non si riesci a risolvere il problema, il manuale d’uso ti mostrerà il percorso di ulteriori procedimenti – il contatto con il centro servizio clienti o il servizio più vicino.
