Manuale d’uso / di manutenzione del prodotto C2904M-B del fabbricante Pelco
Vai alla pagina of 82
PelcoNet ™ Multimedia T ransmission V ia Networks C2904M-B (2/05) ® INST ALLA TION/OPERA TION NET4001A.
.
C2904M-B (2/05) 3 CONTENTS Section Page IMPORT ANT SAFEGUARDS AND W ARNINGS .............................................................................................. .................................................................... 7 REGULA TORY NOTICES .
4 C2904M-B (2/05) WEB BROWSER CONTROL P AGES ...................................................................................................... .............................................................................. 50 ACCESSING THESE P AGES .
C2904M-B (2/05) 5 LIST OF ILLUSTRA TIONS Figure Page 1 Front Panel LEDs .............................................................................................................. ....................................................................
6 C2904M-B (2/05) LIST OF TABLES Section Page A General Settings .............................................................................................................. ...........................................................................
C2904M-B (2/05) 7 IMPORT ANT SAFEGUARDS AND W ARNINGS Observe the following W ARNINGS before installing and using this product. 1. Read these instructions. 2. Keep these instructions. 3. Heed all warnings. 4. Follow all instructions. 5. Do not use this apparatus near water .
8 C2904M-B (2/05) REGULA TORY NOTICES This equipment has been tested and found to comply with the limits of a Class B digital device, pursuant to part 15 of the FCC rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
C2904M-B (2/05) 9 WHA T IS THE PELCONET NET4001A TRANSMISSION SYSTEM? The PelcoNet NET4001A transmission system is technology that lets you view video in real time across a LAN (local area network) and even W ANs (wide area networks).
10 C2904M-B (2/05) INSTRUCTIONS FOR THE NETWORK ADMINISTRA TOR The PelcoNet™ NET4001A multimedia transmission system allows live video transmission to be viewed over TCP/IP-based networks. This section is intended to help the network administrator know what is involved with installing this product and how it will affect the network.
C2904M-B (2/05) 11 OVERVIEW NOTE: This manual refers to the PelcoNet NET4001A transmission system when discussing features, functions, or specifications that apply to the transmitter/receiver . “Receiver ,” as used in this manual, refers to the PelcoNet NET4001A unless otherwise noted.
12 C2904M-B (2/05) FRONT P ANEL LEDS Video In Video Out Audio In 10/100 Base-T 100-250VAC50/60Hz 100mA COM2: RS232 Ethernet Audio Out Power COM1: RS232/485 Key: 1= IR (infrared) diode for future development. 2= HDD LED.
C2904M-B (2/05) 13 PIN ASSIGNMENTS Pin COM1 COM2 RS-232 RS-232/485 RS-232 1 DCD – – (data carrier detect) 2 RxD RxD+ RxD (receive data) (receive data plus) (receive data) 3 TxD TxD- TxD (transmit .
14 C2904M-B (2/05) TYPICAL APPLICA TIONS DISPLA YING REMOTE VIDEO ON A WEB BROWSER The NET4001A uses MPEG-2 and MPEG-4 for transmitting audio and video across the network. This enables transmission to standard web browsers of either live video (Live Video mode) or a stream of still images (Server Push mode).
C2904M-B (2/05) 15 Video In Video Out Audio Out Audio In COM1: RS232/485 10/100 Base-T Ethernet Power 100-250VAC50/60Hz 100mA COM2: RS232 Video In Video Out Audio Out Audio In COM1: RS232/485 10/100 B.
16 C2904M-B (2/05) DIAGRAMS OF TYPICAL APPLICA TIONS V ideo In V ideo Out Audio Out Audio In COM1: RS232/485 10/100 Base-T Ethernet Power 100-250VAC50/60Hz 100mA COM2: RS232 V ideo In V ideo Out Audio.
C2904M-B (2/05) 17 Figure 7. LAN Browser-To-Box Connection (Transmitter, Browser, Fixed Camera) Vi deo In Video Out Audio Out Audio In COM1: RS232/485 10/100 Base-T Ethernet Power 100-250VAC50/60Hz 100mA COM2: RS232 TRANSMITTER SERVER HUB BROWSER CAMERA Figure 8.
18 C2904M-B (2/05) Vi deo In Video Out Audio Out Audio In COM1: RS232/485 10/100 Base-T Ethernet Power 100-250VAC50/60Hz 100mA COM2: RS232 TRANSMITTER SERVER HUB BROWSER SPECTRA VIDEO D ATA GENEX Vide.
C2904M-B (2/05) 19 Figure 11. WAN Box-To-Box Connection (Transmitter, Receiver, Spectra) Video In Video Out Audio Out Audio In COM1: RS232/485 10/100 Base-T Ethernet Powe r 100-250VA C50/60Hz 100mA CO.
20 C2904M-B (2/05) Figure 13. WAN Browser-To-Box Connection (Transmitter, Browser, Fixed Camera) Vi deo In Video Out Audio Out Audio In COM1: RS232/485 10/100 Base-T Ethernet Power 100-250VAC50/60Hz 100mA COM2: RS232 TRANSMITTER BROWSER CAMERA VIDEO VIDEO CLOVIS SERVER HUB ROUTER 1 OR MORE PCs NEW YORK SERVER HUB ROUTER 1 OR MORE PCs .
C2904M-B (2/05) 21 Figure 15. WAN Browser-To-Box Connection (Transmitter, Browser, Spectra, Genex) Vi deo In Video Out Audio Out Audio In COM1: RS232/485 10/100 Base-T Ethernet Power 100-250VAC50/60Hz 100mA COM2: RS232 TRANSMITTER CLOVIS SERVER HUB ROUTER 1 OR MORE PCs NEW YORK SERVER HUB ROUTER 1 OR MORE PCs BROWSER SPECTRA VIDEO D ATA GENEX .
22 C2904M-B (2/05) HARDWARE INST ALLA TION Refer to Appendix A – Connecting PelcoNet NET4001A T o Different Components for diagrams that show various connections. RACK MOUNTING If desired, rack mount one or two NET4001A units on a single shelf of a standard 19-inch equipment rack using the supplied rack mount kit.
C2904M-B (2/05) 23 MOUNTING TWO UNITS Figure 17. Mounting Two Units Refer to Figure 17. Use the two short angle brackets and two rails from the mounting kit. The two units must first be bolted together . Do the following: 1. T urn the two units upside down.
24 C2904M-B (2/05) CONNECTING VIDEO SOURCES OR DISPLA YS Figure 18. Connecting Camera or Monitor Refer to Figure 18. T o connect a camera, plug a standard coaxial cable into the Video In BNC connector on the rear of the NET4001A and the other end into the camera.
C2904M-B (2/05) 25 CONNECTING DA T A TERMINALS The bi-directional data interface ports can be used as control ports for equipment connected to the NET4001A (for example, a dome camera with motorized lens).
26 C2904M-B (2/05) CONNECTING EXTERNAL SENSORS Figure 21. Connecting External Sensors and Peripheral Devices The unit has an alarm input that lets you connect an external signaling device, like a door contact or motion detector .
C2904M-B (2/05) 27 Figure 22. Connecting to the LAN Port Refer to Figure 22. T o connect a 10/100 BASE-T network, plug a standard UTP/Cat5 cable with RJ-45 connectors into the receptacle labeled Ethernet on the NET4001A. Y ou can connect directly to the Ethernet network.
28 C2904M-B (2/05) CONFIGURA TION There are three ways to configure your system: • The most basic configuration is accomplished by connecting a terminal to the RS-232 terminal port. Y ou then type in commands and parameters. Refer to the Configuration Using a T erminal Program section.
C2904M-B (2/05) 29 TERMINAL PROGRAM MENU STRUCTURE The following describes the terminal program menu structure. Main Menu ‘0’ Main Menu ‘1’ IP ‘2’ MPEG-2 encoder ‘3’ MPEG-4 encoder ‘4’ Misc ‘5’ Rcp+ ‘6’ logout 1 – IP Menu The selections and format are shown below .
30 C2904M-B (2/05) 4 – Misc Menu ‘0’ Exit Misc configuration ‘1’ mac address (lists PelcoNet unit’ s MAC address) ‘2’ video out 2 [1=P AL, 2=NTSC] -> ‘set the video out’ [Enter].
C2904M-B (2/05) 31 CONFIGURA TION USING A WEB BROWSER In addition to the aforementioned configuration using a terminal program, which only covers the most basic settings, a web browser is the tool of choice for a more complete configuration. T o accomplish this, the system features a complete HTTP server .
32 C2904M-B (2/05) VIDEO ENCODER MPEG2 CAMERA PRESET P ARAMETER MPEG-2 ENCODING VIDEO ON LIVE P AGE GENERAL UNIT NAME UNIT ID P ASSWORD LEVEL P ASSWORD P ASSWORD CONFIRM DA TE FORMA T UNIT DA TE UNIT .
C2904M-B (2/05) 33 PELCONET NET4001A HOME PAGE Figure 24. PelcoNet Home Page The home page is the starting point for any configuration. The window in the left of the screen is the display area for decoded video. • Clicking the Pelco logo on any page connects you to the Pelco Internet home page (provided the LAN supports Internet access).
34 C2904M-B (2/05) CONFIGURA TION PAGE FOR GENERAL SETTINGS The unit identification, password, date and time, timer server , and software update settings, as well as version information, c omprise the General Settings configuration page. All units have a real-time clock set during manufacture.
C2904M-B (2/05) 35 Table A. General Settings Configuration Default Description Item Setting Unit Name None The Unit name and Unit ID identify the device; for example, in the event of an alarm call. (For future development.) Unit ID None The ID serves as a machine-readable name.
36 C2904M-B (2/05) Table A. General Settings (Continued) Configuration Default Description Item Setting Upload 0% This field shows the percentage of the upload that has been completed. progress Configuration N/A Clicking the Download button saves the current configuration of the PelcoNet NET4001 transmission system download to a PC file.
C2904M-B (2/05) 37 CONFIGURA TION PAGE FOR MPEG 1/-2 VIDEO ENCODER SETTINGS Figure 27. Configuration Page for MPEG 1/-2 Video Encoder Settings MPEG-2 encoder and live page settings make up the configuration page for MPEG 1/-2 video encoder settings. The following table describes the configuration items.
38 C2904M-B (2/05) CONFIGURA TION PAGE FOR MPEG-4 VIDEO ENCODER SETTINGS Figure 28. Configuration Page for MPEG-4 Video Encoder Settings MPEG-4 encoder and live page settings make up the configuration page for MPEG-4 video encoder settings. The following table describes the configuration items.
C2904M-B (2/05) 39 CONFIGURA TION PAGE FOR VIDEO DECODER SETTINGS Figure 29. Configuration Page for Video Decoder Settings V ideo monitor name, output standard, and input termination make up this page. The following table describes the configuration items.
40 C2904M-B (2/05) CONFIGURA TION PAGE FOR ALARM SETTINGS The PelcoNet NET4001 transmission system is not only a multimedia gateway but also a security device and, therefore, has many features related to security applications. The configuration page for alarm settings lets you configure your unit for surveillance applications.
C2904M-B (2/05) 41 Figure 32. Motion Detection Grid Screen The set of alarm features is explained below . Table E. Alarm Settings Configuration Default Description Item Setting Video motion N/A The system has a video motion detection feature. The video scene is monitored constantly for relevant motion.
42 C2904M-B (2/05) Table E. Alarm Settings (Continued) Configuration Default Description Item Setting 8. Use the Object min size [nxn blocks] slide bar to designate the minimum number of cells in the frame a moving object must fill to trigger an alarm.
C2904M-B (2/05) 43 CONFIGURA TION PAGE FOR RELA Y SETTINGS Y ou can use the configuration page for relay settings to specify parameters such as normally open or normally closed switching and bistable or monostable operation of the output. Figure 33. Configuration Page for Relay Settings The relay settings are described in the following table.
44 C2904M-B (2/05) CONFIGURA TION PAGE FOR COM 1 INTERFACE SETTINGS Y ou can use this configuration page to set the parameters of the COM1 RS-232/RS-485 serial interface port.
C2904M-B (2/05) 45 CONFIGURA TION PAGE FOR COM 2 INTERFACE SETTINGS Y ou can use this configuration page to set the parameters of the COM2 RS-232/RS-485 serial interface port.
46 C2904M-B (2/05) CONFIGURA TION PAGE FOR NETWORK SETTINGS Figure 36. Configuration Page for Network Settings Network and routing information make up the configuration page for network settings. These settings are used to integrate the NET4001A into an existing network.
C2904M-B (2/05) 47 Table I. Network Settings Configuration Default Description Item Setting Unit IP address 192.168.0.1 Enter a unique IP address that is valid for your network. The pre-configured default IP address allow s for easy configuration in closed environments.
48 C2904M-B (2/05) LIVE VIDEO P AGE INDICA TORS These five indicators are located at the top of the Live Video and live video Control pages. Indicator Description MPEG-2/MPEG-4 Indicates whether live viewing is in MPEG-2 or MPEG-4 format. Y ou can assign this on the V ideo Encoder Settings page.
C2904M-B (2/05) 49 LIVE VIDEO AND SERVER PUSH VIDEO P AGES Figure 37. Live Video Page The Live Video page shows a real-time picture of a camera view with update rates and image quality similar to a box-to-box configuration. It can be configured for bandwidth use and for various image quality settings.
50 C2904M-B (2/05) WEB BROWSER CONTROL P AGES ACCESSING THESE P AGES 1. T o access the PelcoNet NET4001 transmission system home page, you must first connect to the Internet/intranet network and open Internet Explorer (the browser). 2. Then, enter the default address 192.
C2904M-B (2/05) 51 MA TRIX CONTROL LIVE VIDEO/SERVER PUSH P AGE CONTENTS Figure 39. Matrix Control Page The Matrix Control pages contain the following: •T en numbered buttons • CLR (clear) button .
52 C2904M-B (2/05) GENEX LIVE VIDEO/SERVER PUSH P AGE CONTENTS Figure 40. Genex Control Page The Genex pages contain the following across the top of the page: • Main and Spot monitor selection radio.
C2904M-B (2/05) 53 SPECTRA LIVE VIDEO/SERVER PUSH P AGE CONTENTS Figure 41. Spectra Control Page The Spectra pages contain the following arrayed down the right side under “Lens”: • Iris open and.
54 C2904M-B (2/05) Figure 42. Esprit Control Page The Esprit pages contain the following arrayed down the right side under “Lens”: • Iris open and close buttons • Focus far and near buttons .
C2904M-B (2/05) 55 ADV ANCED FEA TURES AUTOMA TIC CONNECTION FEA TURE The advantage of conventional dedicated cabling lies in guaranteed performance and availability . The PelcoNet transmission syst em’ s auto-connect feature is designed to provide the same level of guaranteed connectivity expected from analog coaxial video cables.
56 C2904M-B (2/05) VIEWING A SNAPSHOT Y ou can view a snapshot by double-clicking on the desired file (.jpg extension) in Windows Explorer . RECORDING THE VIDEO DISPLA Y Y ou can record the camera display from the Live V ideo or live video Matrix, Genex, Spectra, and Esprit control pages.
C2904M-B (2/05) 57 FIRMWARE UPLOAD Units have flash EPROMs for firmware upgrades in the field. These upgrades can be done directly from the web browser . Do the following to upload firmware using the web browser . 1. Obtain the latest PelcoNet NET4001A transmission system firmware from Pelco (http://www .
58 C2904M-B (2/05) TROUBLESHOOTING If the following instructions fail to solve your problem, contact Pelco T echnical Support at 1-800-289-9100 for help. Y ou should have the serial number from the bottom of the unit and the firmware version ready in case they are needed.
C2904M-B (2/05) 59 TROUBLESHOOTING CONNECTION PROBLEMS If you fail to connect to a system from a hardware receiver , make sure network connectivity is available (for example, by using the ping command).
60 C2904M-B (2/05) GENERAL REMEDIES T ABLE Problem Possible Causes Suggested Remedy No connection between unit and terminal Faulty cable connections. Check all leads, plugs, contacts, and connections. program. The computer’ s serial interface is not Check other serial interfaces.
C2904M-B (2/05) 61 SPECIFICA TIONS NETWORK PROTOCOL AND ST ANDARDS COMP A TIBILITY Internet Configuration: RTP , RTCP , UDP , TCP , IP , HTTP , SNMP , IGMP , ICMP , ARP , DHCP Video Coding: MPEG-1, MP.
62 C2904M-B (2/05) GLOSSARY 10BASE-T IEEE 802.3 specification for 10 or 100 Mbs Ethernet ARP Address Resolution Protocol Baud rate Data transmission rate bps Bits per second, the actual data rate Cat5.
C2904M-B (2/05) 63 LAN See Local Area Network Local Area Network Multiple computers linked together into a network to share information within a limited geographic area (such as a building or a campus.
64 C2904M-B (2/05) APPENDIX A – CONNECTING PELCONET NET4001A TO V ARIOUS COMPONENTS Some of the connection examples that follow require the customer to supply a DB9 cable.
C2904M-B (2/05) 65 Figure 45. KBD300A (Direct Mode) Connected to a Receiver or Spectra Dome System TX- TX+ P PROTOCOL ONLY RECEIVER OR SPECTRA RX+ RX- Video In Video Out Audio Out Audio In COM1: RS232.
66 C2904M-B (2/05) CONNECTION SCENARIO 2 – USING A KBD4000 FOR MUL TIPLEXER CONTROL Refer to Figure 46 and the instructions that follow . NOTE: If you set all your cameras to Standard Coaxitron for better control on the browser , you will lose most of the KBD4000 keyboa rd control functions.
C2904M-B (2/05) 67 CONNECTION SCENARIO 3 – USING A CM9760-KBD Refer to Figure 47 and the instructions that follow . Figure 47. CM9760KBD Connected to a CM9760-CC1 Controller 1. Connect a PV130 converter to the COM1 port on the back of the NET4001A receiver unit.
68 C2904M-B (2/05) CONNECTING PELCONET TO THE COM IN RS-422 PORT ON A GENEX MUL TIPLEXER Refer to Figure 48 and the instructions to follow . Figure 48. Connecting PelcoNet to Genex Using the COM IN RS-422 Port 1. V erify that the multiplexer has Version 4.
C2904M-B (2/05) 69 CONNECTING PELCONET TO A CM9502 ASCII SERIAL PORT Refer to Figure 44 and Figure 50. This configuration lets an operator view and control cameras from a PC using a web browser . (The operator’ s PC is not shown on the diagram.) Figure 50.
70 C2904M-B (2/05) CONNECTING PELCONET TO A CM6700 AND KBD200A FOR REMOTE ASCII CONTROL Refer to Figure 51. This configuration lets an operator view and control cameras with a remote KBD200A keyboard.
C2904M-B (2/05) 71 CONNECTING PELCONET TO A CM6700 ASCII PORT Refer to Figure 52. This configuration lets an operator view and control cameras from a PC using a web browser .
72 C2904M-B (2/05) CONNECTING PELCONET TO A CM9760-DT FOR REMOTE BROWSER CONTROL Refer to Figure 53. This configuration lets an operator view and control cameras on a PC using a web browser . (The operator’ s PC is not shown on the diagram.) Figure 53.
C2904M-B (2/05) 73 CONNECTING PELCONET TO CM9760 EQUIPMENT FOR REMOTE COMMUNICA TION Refer to Figure 44 and Figure 54 and Figure 55. These configurations let an operator remotely view and control cameras connected to the CM9760.
74 C2904M-B (2/05) CONNECTING A PELCONET TRANSMITTER TO THE CM6800 ASCII PORT Refer to Figure 56. This configuration lets an operator view and control cameras with a PC using a web browser . (The operator’ s PC is not shown on the diagram.) All settings are done in the CM6800 manager program or through a CM6800 menu.
C2904M-B (2/05) 75 Figure 57. Manager Screen SET SERIAL PORT 07 DEVICE: ASCII TYPE: RS232 BAUD RA TE: 9600 P ARITY : ODD DA T A BITS: 8 STOP BITS: 1 RETURN Figure 58.
76 C2904M-B (2/05) CONNECTING PELCONET TO A CM6800 AND KBD200A FOR REMOTE ASCII CONTROL Refer to Figure 59. This configuration lets an operator view and control cameras with a remote KBD200A keyboard. All settings are done in the CM6800 manager program or through a CM6800 menu.
C2904M-B (2/05) 77 APPENDIX B – FREQUENTL Y ASKED QUESTIONS (FAQS) 1. What Pelco devices can I control from my computer with the PelcoNet NET4001 transmission system? PelcoNet can control the follow.
78 C2904M-B (2/05) 12. What type of compression does PelcoNet use? PelcoNet uses the MPEG-2 and MPEG-4 industry standards for video teleconferencing over the Internet. They provide the most effective use of bandwidth with excellent video quality . 13.
C2904M-B (2/05) 79 INDEX A alarm input 26 Alarm indicator 42 Alarm input 42 Automatic connection 55 A verage n [frames] 41 B Baud rate 44, 45 Box-to-box connection 15 C Camera (name) 37, 38 Configurat.
80 C2904M-B (2/05) T Te rminal program commands 29 Ti me server IP address 35 Ti me zone 35 T racker 41 T ransparent data 25 T rigger relay 43 U Unit date 35 Unit ID 35 Unit IP address 47 Unit name 35.
C2904M-B (2/05) 81 PRODUCT WARRANTY AND RETURN INFORMA TION W ARRANTY Pelco will repair or replace, without charge, any merchandise proved defective in material or work- manship for a period of one year after the date of shipment.
World Headquarters 3500 Pelco Way Clovis, California 93612 USA USA & Canada Tel: 800/289-9100 Fax: 800/289-9150 International Tel: 1-559/292-1981 Fax: 1-559/348-1120 www.
Un punto importante, dopo l’acquisto del dispositivo (o anche prima di acquisto) è quello di leggere il manuale. Dobbiamo farlo per diversi motivi semplici:
Se non hai ancora comprato il Pelco C2904M-B è un buon momento per familiarizzare con i dati di base del prodotto. Prime consultare le pagine iniziali del manuale d’uso, che si trova al di sopra. Dovresti trovare lì i dati tecnici più importanti del Pelco C2904M-B - in questo modo è possibile verificare se l’apparecchio soddisfa le tue esigenze. Esplorando le pagine segenti del manuali d’uso Pelco C2904M-B imparerai tutte le caratteristiche del prodotto e le informazioni sul suo funzionamento. Le informazioni sul Pelco C2904M-B ti aiuteranno sicuramente a prendere una decisione relativa all’acquisto.
In una situazione in cui hai già il Pelco C2904M-B, ma non hai ancora letto il manuale d’uso, dovresti farlo per le ragioni sopra descritte. Saprai quindi se hai correttamente usato le funzioni disponibili, e se hai commesso errori che possono ridurre la durata di vita del Pelco C2904M-B.
Tuttavia, uno dei ruoli più importanti per l’utente svolti dal manuale d’uso è quello di aiutare a risolvere i problemi con il Pelco C2904M-B. Quasi sempre, ci troverai Troubleshooting, cioè i guasti più frequenti e malfunzionamenti del dispositivo Pelco C2904M-B insieme con le istruzioni su come risolverli. Anche se non si riesci a risolvere il problema, il manuale d’uso ti mostrerà il percorso di ulteriori procedimenti – il contatto con il centro servizio clienti o il servizio più vicino.