Manuale d’uso / di manutenzione del prodotto XAV2602 del fabbricante NETGEAR
Vai alla pagina of 16
Powerline AV+ 200 Nano Dual-Port XAV2602 Installation Guide.
© 2011 NETGEAR, Inc. All rights reserved. No part of this publication may be reproduced, transmitted, transcribed, stored in a retrieval system, or translated into any language in any form or by any means without the written permission of NETGEAR, Inc.
3 Package Contents Products sold in some locations include a Resource CD . Powerline AV+ 200 Ethernet cable UK France Germany/Europe Australia Switzerland Your adapter might look like one of these: (N.
4 Hardware Features Filtered AC socket Power LED Ethernet LED Powerline LED Security button Factory Reset button Ethernet Port 1 for higher- priority traffic Ethernet Port 2 for lower-priority data tr.
5 LEDs The LEDs indicate the status of your Powerline adapter. • When you plug in the adapter, the Power LED lights up and turns green. • The adapter is not active when no Ethernet link has occurred for more than 10 minutes. The adapter enters power saving mode, and the Power LED turns amber .
6 Compatible NETGEAR Powerline Devices To create a Powerline network you need at least two compatible Powerline devices. Your Powerline adapter can share a Powerline network with these compatible NETGEAR devices: XAV101, XAV1004, XAV2001, XAV2101, XAV1101, XAV1301, XAV1601, XAV2501, XAV5001, XAV5501, XAV5601, XAV5004, and XAVN2001.
7 Install Your Powerline Adapter The ports use Quality of Service (QoS) to prioritize traffic. Port 1 on the left is the high- priority video port. You can plug a power strip into the filtered outlet, but do not plug your Powerline adapter into a power strip.
8 You can set up a new Powerline network with your XAV2602 and a compatible Powerline device, or you can add your XAV2602 to an existing Powerline network. Set up a new Powerline network: 1. Obtain at least one more Powerline device that is compatible with the XAV2602.
9 The Powerline LED turns on for each Powerline adapter when they detect each other. The devices automatically form a Powerline network. Add the adapter to a secure Powerline network: Your Powerline network is already secured if you used the Security button or the Powerline Utility to set up security.
10 Add the adapter to a Powerline network that has not been secured: 1. Check to make sure that the Powerline devices you already use are compatible. 2. Plug the XA V2602 adapter into another electrical outlet. The XAV2602 will start to communicate with other Powerline devices (indicated by the linking Powerline LED).
11 Secure Your Powerline Network A Powerline network forms when at least two compatible Powerline devices communicate. After the Powerline network is up and running, you can use the Security buttons on the adapters to add encryption to your Powerline network.
12 Technical Support Thank you for selecting NETGEAR products. After installing your device, locate the serial number on the label of your product and use it to register your product at https://my.netgear.com . Registration is required before you can use the telephone support service.
13 Safety Information • AC input:100-125V~, 0.2A max in North America and 200-250V~, 0.2A max in other regions, for the XAV2602. • Operating temperature: 0C to 40C • The socket-outlet shall be installed near the equipment and be easily accessible.
14 • If the input AC voltage is less than 125Vac, the device plugged into the filtered AC socket of the Powerline adapter might not perform as well as expected. • DO NOT PLUG MAJOR HOME APPLIANCES into the filtered AC socket or into an attached power strip.
Compliance This symbol was placed in accordance with the European Union Directive 2002/ 96 on the Waste Electrical and Electronic Equipment (the WEEE Directive). If disposed of within the European Union, this product should be treated and recycled in accordance with the laws of your jurisdiction implementing the WEEE Directive.
NETGEAR, Inc. 350 East Plumeria Drive San Jose, CA 95134, USA June 2011.
Un punto importante, dopo l’acquisto del dispositivo (o anche prima di acquisto) è quello di leggere il manuale. Dobbiamo farlo per diversi motivi semplici:
Se non hai ancora comprato il NETGEAR XAV2602 è un buon momento per familiarizzare con i dati di base del prodotto. Prime consultare le pagine iniziali del manuale d’uso, che si trova al di sopra. Dovresti trovare lì i dati tecnici più importanti del NETGEAR XAV2602 - in questo modo è possibile verificare se l’apparecchio soddisfa le tue esigenze. Esplorando le pagine segenti del manuali d’uso NETGEAR XAV2602 imparerai tutte le caratteristiche del prodotto e le informazioni sul suo funzionamento. Le informazioni sul NETGEAR XAV2602 ti aiuteranno sicuramente a prendere una decisione relativa all’acquisto.
In una situazione in cui hai già il NETGEAR XAV2602, ma non hai ancora letto il manuale d’uso, dovresti farlo per le ragioni sopra descritte. Saprai quindi se hai correttamente usato le funzioni disponibili, e se hai commesso errori che possono ridurre la durata di vita del NETGEAR XAV2602.
Tuttavia, uno dei ruoli più importanti per l’utente svolti dal manuale d’uso è quello di aiutare a risolvere i problemi con il NETGEAR XAV2602. Quasi sempre, ci troverai Troubleshooting, cioè i guasti più frequenti e malfunzionamenti del dispositivo NETGEAR XAV2602 insieme con le istruzioni su come risolverli. Anche se non si riesci a risolvere il problema, il manuale d’uso ti mostrerà il percorso di ulteriori procedimenti – il contatto con il centro servizio clienti o il servizio più vicino.
