Manuale d’uso / di manutenzione del prodotto GS724T-300NAS del fabbricante NETGEAR
Vai alla pagina of 32
202-10510-02 January 2011 v1.0 NETGEAR , Inc. 350 East Plumeria Drive San Jose, California 95134 USA GS716T/GS724T Hardware Installation Guide.
ii v1.0, January 2011 © 2007, 2008, 2009 by NETGEAR, Inc. All rights reserved. Trademarks NETGEAR, the NETGEAR logo, and Auto Uplink are trademarks or registered trademarks of NETGEAR, Inc. Microsoft, Windows, and Windows NT are registered trademarks of Microsoft Corporation.
iii v1.0, January 2011 Contents GS716T/GS724T Hardware Installation Guide About This Manual Conventions, Formats and Scope ..................................................................................... v Revision History .......................
GS716T/GS724T Hardware Installation Guide iv v1.0, January 2011 Step 3: Checking the Installation .................................................................................. 4-15 Step 4: Connecting Devices to the Switch ........................
v v1.0, January 2011 About This Manual The NETGEAR ® ProSafe TM GS716T/GS724T Hardware Installation Guide describes how to install, configure and troubleshoot the Smart Switch. The information in this manual is intended for readers with intermediate computer and Internet skills.
GS716T/GS724T Hardware Installation Guide vi v1.0, January 2011 • Scope. This manual is written for the Smart Switch according to these specifications: Revision History Danger: This is a safety warning. Failure to take heed of this notice may result in personal injury or death.
1-1 v1.0, January 2011 Chapter 1 Introduction Congratulations on the purchase of the NETGEAR Smart Switch. The NETGEAR Smart Switch is a state-of-the-art, high-performance, IEEE-compliant network solu.
GS716T/GS724T Hardware Installation Guide 1-2 Introduction v1.0, January 2011 Service (CoS) for traffic prioritization. These features provide better understanding and control of the network. Initial discovery of the switch on the network requires the Smart Control Center program, a utility that runs on a PC.
GS716T/GS724T Hardware Installation Guide Introduction 1-3 v1.0, January 2011 • Automatic address learning function to build the packet-forwarding information table. The table contains up to 8K Media Access Control (MAC) addresses. • Full-duplex and half-duplex functions for all 10/100/1000 Mbps ports.
GS716T/GS724T Hardware Installation Guide 1-4 Introduction v1.0, January 2011 Verify that the package contains the following: • NETGEAR Smart Switch • Rubber footpads for tabletop installation •.
2-5 v1.0, January 2011 Chapter 2 Physical Description This chapter describes the NETGEAR Smart Switch hardware features. Topics include: • GS716T Front and Back Panel Configuration • GS724T Front .
GS716T/GS724T Hardware Installation Guide 2-6 Physical Description v1.0, January 2011 • System LEDs Figure 2-2 illustrates the NETGEAR GS716T Smart Switch back panel: The back panel contains the following: • A 100-240VAC/50-60 Hz universal input, which is a standard AC power receptacle for accommodating the supplied power cord.
GS716T/GS724T Hardware Installation Guide Physical Description 2-7 v1.0, January 2011 • System LEDs Figure 2-4 illustrates the NETGEAR GS724T Smart Switch back panel: The back panel contains the following: • A 100-240VAC/50-60 Hz universal input, which is a standard AC power receptacle for accommodating the supplied power cord.
GS716T/GS724T Hardware Installation Guide 2-8 Physical Description v1.0, January 2011 System LEDs The following table describes the system LED designations.
GS716T/GS724T Hardware Installation Guide Physical Description 2-9 v1.0, January 2011 • Determines whether the link to the attached device requires a “normal” connection (such as when connecting the port to a PC) or an “uplink” connection (such as when connecting the port to a router, switch, or hub).
3-11 v1.0, January 2011 Chapter 3 Applications Your NETGEAR Smart Switch is designed to provide flexibility in configuring your network connections. It can be used as a stand-alone device or with 10 Mbps, 100 Mbps, and 1000 Mbps hubs and switches.
GS716T/GS724T Hardware Installation Guide 3-12 Applications v1.0, January 2011.
4-13 v1.0, January 2011 Chapter 4 Installation This chapter describes the installation procedures for your NETGEAR Smart Switch. Switch installation involves the following steps: Step 1: Preparing the.
GS716T/GS724T Hardware Installation Guide 4-14 Installation v1.0, January 2011 Step 2: Installing the Switch The NETGEAR Smart Switch can be installed on a flat surface or in a standard 19-inch rack. Installing the Switch on a Flat Surface The switch ships with four self-adhesive rubber footpads.
GS716T/GS724T Hardware Installation Guide Installation 4-15 v1.0, January 2011 5. Tighten the screws with a #2 Phillips screwdriver to secure the switch in the rack. Step 3: Checking the Installation Before applying power perform the following: • Inspect the equipment thoroughly.
GS716T/GS724T Hardware Installation Guide 4-16 Installation v1.0, January 2011 Step 4: Connecting Devices to the Switch The following procedure describes how to connect PCs to the switch’s RJ-45 ports.
GS716T/GS724T Hardware Installation Guide Installation 4-17 v1.0, January 2011 Insert the SFP module into the SFP module bay. Press firmly to ensure the module seats into the connector. Step 6: Applying AC Power NETGEAR Smart Switch does not have an ON/OFF switch.
GS716T/GS724T Hardware Installation Guide 4-18 Installation v1.0, January 2011 Step 7: Managing the Switch using a Web Browser or the PC Utility The NETGEAR Smart Switch contains software for viewing, changing, and monitoring the way it works. This management software is not required for the switch to work.
Troubleshooting A-19 v1.0, January 2011 Appendix A Troubleshooting This chapter provides information about troubleshooting the NETGEAR Smart Switch. Topics include the following: • Troubleshooting Chart • Additional Troubleshooting Suggestions Troubleshooting Chart The following table lists symptoms, causes, and solutions of possible problems.
GS716T/GS724T Hardware Installation Guide A-20 Troubleshooting v1.0, January 2011 Additional Troubleshooting Suggestions If the suggestions in Troubleshooting Chart do not resolve the problem, refer to the troubleshooting suggestions in this section.
GS716T/GS724T Hardware Installation Guide Troubleshooting A-21 v1.0, January 2011 Auto-Negotiation The RJ-45 ports negotiate the correct duplex mode and speed if the device at the other end of the link supports auto negotiation.
Technical Specifications B-23 v1.0, January 2011 Appendix B Technical Specifications Network Protocol and Standards Compatibility IEEE 802.3i 10BASE-T IEEE 802.3u 100BASE-TX,FX IEEE 802.3ab 1000BASE-T IEEE 802.3z 1000BASE-X IEEE 802.3x flow control Management Windows 2000 + XP, Vista; Microsoft Explorer 6.
GS716T/GS724T Hardware Installation Guide B-24 Technical Specifications v1.0, January 2011 Performance Specifications Forwarding modes: Store-and-forward Bandwidth: 32 Gbps (for GS716T); 48 Gbps (for .
GS716T/GS724T Hardware Installation Guide Technical Specifications B-25 v1.0, January 2011 Modules AGM731F 1000BASE-SX SFP GBIC for multimode fiber AGM732F 1000BASE-LX SFP GBIC for single mode fiber A.
Index-27 v1.0, January 2011 Index Numerics 1000BASE-LX 1-2 1000BASE-SX 1-2 1000BASE-T 1-2 1000BASE-X 1-2 100-240VAC/50-60 2-6 100BASE-TX 1-2 10BASE-T 1-2 1U 1-3 8-pin 2-8 A AC Power 2-6 , 2-7 AGM731F .
GS716T_GS724T Hardware Installation Guide Index-28 v1.0, January 2011 I IEEE 802.3ab 1-2 IEEE 802.3i 1-2 IEEE 802.3u 1-2 IEEE 802.3x 1-2 , 1-3 IEEE 802.
GS716T_GS724T Hardware Installation Guide Index-29 v1.0, January 2011 VLAN 1-1 W Warranty 1-4 Web-based Graphical User Interface 1-1.
Un punto importante, dopo l’acquisto del dispositivo (o anche prima di acquisto) è quello di leggere il manuale. Dobbiamo farlo per diversi motivi semplici:
Se non hai ancora comprato il NETGEAR GS724T-300NAS è un buon momento per familiarizzare con i dati di base del prodotto. Prime consultare le pagine iniziali del manuale d’uso, che si trova al di sopra. Dovresti trovare lì i dati tecnici più importanti del NETGEAR GS724T-300NAS - in questo modo è possibile verificare se l’apparecchio soddisfa le tue esigenze. Esplorando le pagine segenti del manuali d’uso NETGEAR GS724T-300NAS imparerai tutte le caratteristiche del prodotto e le informazioni sul suo funzionamento. Le informazioni sul NETGEAR GS724T-300NAS ti aiuteranno sicuramente a prendere una decisione relativa all’acquisto.
In una situazione in cui hai già il NETGEAR GS724T-300NAS, ma non hai ancora letto il manuale d’uso, dovresti farlo per le ragioni sopra descritte. Saprai quindi se hai correttamente usato le funzioni disponibili, e se hai commesso errori che possono ridurre la durata di vita del NETGEAR GS724T-300NAS.
Tuttavia, uno dei ruoli più importanti per l’utente svolti dal manuale d’uso è quello di aiutare a risolvere i problemi con il NETGEAR GS724T-300NAS. Quasi sempre, ci troverai Troubleshooting, cioè i guasti più frequenti e malfunzionamenti del dispositivo NETGEAR GS724T-300NAS insieme con le istruzioni su come risolverli. Anche se non si riesci a risolvere il problema, il manuale d’uso ti mostrerà il percorso di ulteriori procedimenti – il contatto con il centro servizio clienti o il servizio più vicino.
