Manuale d’uso / di manutenzione del prodotto 5200 del fabbricante NETGEAR
Vai alla pagina of 38
350 East Plumeria Drive San Jose, CA 95134 USA December 2012 202-1 1024-03 Re a dy D A T A 5 2 0 0 Har d w ar e M anu al.
2 NETGEAR ReadyDA T A 5200 Support Thank you for selecting NETGEAR products. After installing your device, locate the serial number on the label of your product and use it to register your p roduct at https://my .netgear .com . Y ou must register your product befor e you can use NETGEAR telephone support.
3 Ta b l e o f C o n t e n t s Chapter 1 Getting Started Front Panel . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5 Rear Panel . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
4 1 1. Gettin g S tarted Congratulations on your purchase of a NETGEAR® ReadyDA T A TM 5200. T his ReadyDA T A 5200 Hardware Manual describes the physical features of the ReadyDA T A 5200.
Getting St arted 5 NETGEAR ReadyDA T A 5200 F ront P anel The following figure shows the front pane l of the ReadyDA T A 5200 with the optional f ront bezel removed. 1 2 Figure 1. ReadyDA T A 5200 front p anel 1. Drive bays with disk st atus LEDs 2.
Getting St arted 6 NETGEAR ReadyDA T A 5200 Each drive bay features a latch that relea ses the pop-out tray handle , as shown in the following figure. 1 2 Figure 3.
Getting St arted 7 NETGEAR ReadyDA T A 5200 Re a r Pan el The following figure shows the rear pane l of the ReadyDA T A 5200. 1 2 3 4 5 6 7 8 9 Figure 5. ReadyDA T A 5200 rear p anel 1. Power supplies 2. PS2 keyboard and mouse port s 3. USB ports 4.
Getting St arted 8 NETGEAR ReadyDA T A 5200 Y ou can shut down your unit in these ways: • Using the Power button : • Preferred shut down . Press the Power button two times to initiate a graceful shutdo wn. • Forced shut down . If the unit is hung, press the Power butto n and hold for 5 seconds to force a shutdown.
Getting St arted 9 NETGEAR ReadyDA T A 5200 Boot Menu Use the boot menu to rest art or trouble shoot your ReadyDA T A 5200. It has the following boot modes: • Normal . Initiates a normal boot process, just like booting using the Power button. • Factory default .
Getting St arted 10 NETGEAR ReadyDA T A 5200 7. Press and release the Reset button to scroll through the boot menu options. W a tch the blink p attern of the power diagnostic LED and th e information LED. The following table shows t he how the system displays the current option using th e power diagnostic LED and in formation LED.
Getting St arted 11 NETGEAR ReadyDA T A 5200 Factory Settings The following ta ble lists factory settings for the ReadyDA T A 5200. T able 2. Fa ctory setti ngs Feature Default Login User login URL when the ReadyDA T A 5200 is not connected to a DHCP server https://169.
Getting St arted 12 NETGEAR ReadyDA T A 5200 T echnical Specifications The following t able lists th e technical s pecifications for the Rea dyDA T A 5200.
13 2 2. Expansi on Disk A r r a y s This chapter describes physical features of the EDA2000 an d EDA4000, which are optional expansion disk arra ys you can use with the ReadyDA T A 5200.
Exp ansion Disk Arrays 14 NETGEAR ReadyDA T A 5200 F ront P anel The following figure shows the front p anel of t he EDA2000 (2U expansion disk array), top, and EDA4000 (4U expansion disk array), bottom, with the optional front bezel removed. 2 2 1 Figure 6.
Exp ansion Disk Arrays 15 NETGEAR ReadyDA T A 5200 The following figure shows the control p anels in more detail. 1 2 3 4 5 6 7 8 1 2 3 6 7 4 8 5 Figure 7. EDA2000 and EDA4000 control p anels 1. Power button 2. Reset button 3. Power LED 4.
Exp ansion Disk Arrays 16 NETGEAR ReadyDA T A 5200 For more information about adding and replacing disk drives, see Add a Disk on page 23 and Replace a Disk on p age 27 . The EDA 2000 and EDA 4000 come with an fr ont bezel that protect s the drive bays with a lockab le cover .
Exp ansion Disk Arrays 17 NETGEAR ReadyDA T A 5200 Status Information The statu s indicators on the EDA2000 and EDA4000 are the same as on the ReadyDA T A 5200. For more information, see Ta b l e 1, S tatus indica tors on p age 7. T echnical Specifications The following ta ble lists the technical specifications for th e EDA2000.
Exp ansion Disk Arrays 18 NETGEAR ReadyDA T A 5200 The following t able lists th e technica l specifications for the EDA4000. T able 5. EDA4000 te chnical s pecifications Feature Specification Electri.
19 3 3. Mai n te nan ce This chapter describes how to perform maintena nce activities like adding disks an d replacing disks and system component s. It includes the followin g topics: • Front Bezel .
Maintenance 20 NETGEAR ReadyDA T A 5200 F ront Bezel The ReadyDA T A 5200, EDA2000, and EDA4000 come with a front bezel that protect s the drive bays with a lockable cover . Y ou can oper ate these systems with or without the bezel. T o install the front be zel: 1.
Maintenance 21 NETGEAR ReadyDA T A 5200 T o remove the front bezel: 1. If the bezel is locked, unlock it. 2. Push the re lease latch on the left side of the bezel.
Maintenance 22 NETGEAR ReadyDA T A 5200 Disks The ReadyDA T A 5200 does not recognize non-NETGEAR disks. I n addition, if you use non-NETGEAR disks, Dashboard might di splay an error . The ReadyDA T A 5200 can recognize only disks that yo u obtain throug h NETGEAR or a NETGEAR authorized reseller .
Maintenance 23 NETGEAR ReadyDA T A 5200 Add a Disk Y ou can add a hard disk to an empty disk bay . Y ou do not need to shut down your unit before adding a disk. Y ou can use 2.5-inch and 3.5-in ch disk driv es in a ReadyDA T A 5200, EDA2000, or EDA4000.
Maintenance 24 NETGEAR ReadyDA T A 5200 3. T urn the disk over and remove the metal plate from the drive tray . 4. (Optional) Depending on the thickness of the disk drive you are installing, adhere the foam pad to the met al plate in the area bounded by the metal t abs so that the 2.
Maintenance 25 NETGEAR ReadyDA T A 5200 6. Align the screw holes on the disk drive with the screw holes on the metal tabs and inst all the screws to fasten the disk drive to the metal plate. 7. With the disk tray handle to the right and the hard disk drive to the left, assemble the disk tray and metal plate.
Maintenance 26 NETGEAR ReadyDA T A 5200 T o add a 3.5-inch disk: 1. Pull the disk tray release switch. The tray handle pop s out. 1 2 1. Disk tray handle 2. Disk tray release switch 2. Pull out the disk tray and place a disk in the tray . 3. Assemble the disk tray .
Maintenance 27 NETGEAR ReadyDA T A 5200 R eplace a Disk If a disk fails, your system pro vides email alerts and status messag es about the need to replace a disk. Y ou do not need to power down your unit when replacing a disk. T o replace a 2.5-inch disk: 1.
Maintenance 28 NETGEAR ReadyDA T A 5200 4. Remove the screws that hold the disk drive to the metal tabs and remove the old disk drive . 5. Replace the disk drive and rea ssemble the disk tray . For more information, see Add a Disk o n p age 23 . 6. Slide the disk tray back into the unit and secure the handle.
Maintenance 29 NETGEAR ReadyDA T A 5200 T o replace a 3.5-inch disk: 1. If a disk failed, scan disk LEDs on the disk bays to identify the failed disk. 2. Pull the disk tray rele ase pull switch. The tray handle pop s out. 1 2 1. Disk tray handle 2.
Maintenance 30 NETGEAR ReadyDA T A 5200 System Components Y ou can replace system component s on your ReadyDA T A 5200, EDA2000, or EDA4000. P ower Supply If either of the two power supply modules fails, the other module t akes the full load and allows the system to continue operation without interruption.
Maintenance 31 NETGEAR ReadyDA T A 5200 W ARNING: Ensure that the chassis cove r is in place when the system is operating to allow proper cooling. Out -of-warranty damage to the system can occur if you do not strictly follow this practice.
Maintenance 32 NETGEAR ReadyDA T A 5200 Battery Y our system uses a CR2032 battery . Dis pose of used batteries according to the manufacturer ’s instructions. DANGER: Installing the on-board battery up side down, which reverses it s polarities, creates a danger of explosion.
33 A A. W ar nings and Pr ecauti ons This appendix cont ains safety warnings and pr ecautions for the ReadyDA T A 5200 . It includes the following sections: • Safety W arnings • Electrical Safety .
W arnings and Precautions 34 NETGEAR ReadyDA T A 5200 Safety W arnings 1. The equipment is certified for inst allation only by trained personn el, according to the installation instru ctions provided with each un it. 2. Th e socket outlet shall be installed near the equipment and shall be easily accessible.
W arnings and Precautions 35 NETGEAR ReadyDA T A 5200 • Do not use mats designed to decrease st atic electrical discharge as protection from electrical shock.
W arnings and Precautions 36 NETGEAR ReadyDA T A 5200 Electrostatic Discharge (ESD) P recautions Electrostatic discharge is g enerated by tw o object s with dif ferent electrical charges coming into cont act with each other .
37 B B. No tif i ca ti on of C om plian ce Regulatory Compliance Information This section includes user requirement s for oper ating this product in a ccordance with National laws for usage of radio spectrum and ope ration of radio devices.
Notification of Compliance 38 NETGEAR ReadyDA T A 5200 FCC Declaration Of Conformity We, NETGEAR, Inc., 350 East Plumeria Drive, San Jose, CA 95134, declare under our sole responsibility that the NETGEAR ReadyDA T A 5200 complie s with Part 15 of FCC Rules.
Un punto importante, dopo l’acquisto del dispositivo (o anche prima di acquisto) è quello di leggere il manuale. Dobbiamo farlo per diversi motivi semplici:
Se non hai ancora comprato il NETGEAR 5200 è un buon momento per familiarizzare con i dati di base del prodotto. Prime consultare le pagine iniziali del manuale d’uso, che si trova al di sopra. Dovresti trovare lì i dati tecnici più importanti del NETGEAR 5200 - in questo modo è possibile verificare se l’apparecchio soddisfa le tue esigenze. Esplorando le pagine segenti del manuali d’uso NETGEAR 5200 imparerai tutte le caratteristiche del prodotto e le informazioni sul suo funzionamento. Le informazioni sul NETGEAR 5200 ti aiuteranno sicuramente a prendere una decisione relativa all’acquisto.
In una situazione in cui hai già il NETGEAR 5200, ma non hai ancora letto il manuale d’uso, dovresti farlo per le ragioni sopra descritte. Saprai quindi se hai correttamente usato le funzioni disponibili, e se hai commesso errori che possono ridurre la durata di vita del NETGEAR 5200.
Tuttavia, uno dei ruoli più importanti per l’utente svolti dal manuale d’uso è quello di aiutare a risolvere i problemi con il NETGEAR 5200. Quasi sempre, ci troverai Troubleshooting, cioè i guasti più frequenti e malfunzionamenti del dispositivo NETGEAR 5200 insieme con le istruzioni su come risolverli. Anche se non si riesci a risolvere il problema, il manuale d’uso ti mostrerà il percorso di ulteriori procedimenti – il contatto con il centro servizio clienti o il servizio più vicino.
