Manuale d’uso / di manutenzione del prodotto SR5007 del fabbricante Marantz
Vai alla pagina of 162
Owner’ s Man ual A V Sur r ound Receiv er SR50 07 Basic version Adv anced version Infor mation DVD.
I n SAFETY PRECAUTIONS CA UTION RISK OF ELECTRIC SHOCK DO NOT OPEN CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK). NO USER-SERVICEABLE PARTS INSIDE.
II n NOTES ON USE WARNINGS • Avoid high temperatures. Allow for sufficient heat dispersion when installed in a rack. • Handle the power cord carefully. Hold the plug when unplugging the cord. • Keep the unit free from moisture, water, and dust.
1 Thank you for purchasing this marantz product. To ensure proper operation, please read this owner’s manual carefully before using the product. After reading them, be sure to keep them for future reference.
2 Features With a discrete-circuit configuration, the power amplifier provides identical quality for all 7 channels (100 W x 7ch, 8 Ω) The unit is equipped with a power amplifier that reproduces highfidelity sound in sound mode with equal quality and power for all channels, true to the original sound.
3 Cautions on handling • Before turning the power on Check once again that all connections are correct and that there are no problems with the connection cables. • Power is supplied to some of the circuitry even when the unit is set to the standby mode.
Basic version 4 F Connections v page5 F Setup v page27 F Playback (Basic operation) v page34 F Selecting a listening mode (Sound Mode) v page71 Basic version Here, we explain the connections and basic operation methods for this unit.
5 Important information Make connections before using this unit. To create a home theater that can play back higher quality video and audio by fully utilizing the capabilities of this unit and your video devices, connect this unit to each of your video devices with HDMI cables.
6 Important information Converting input video signals for output (Video conversion function) This unit is equipped with three types of video input connectors (HDMI, Component video and video) and three types of video output connectors (HDMI, Component video and video).
7 Connecting an HDMI-compatible device You can connect up to seven HDMI-compatible devices (6-inputs/1-output) to the unit. If the device connected to this unit is equipped with an HDMI connector, it is recommended to use HDMI connections.
8 Connecting an HDMI-compatible device n About ARC (Audio Return Channel) function This function plays TV audio on this unit by sending the TV audio signal to this unit via HDMI cable.
9 Connecting an HDMI-compatible device Connecting this unit to a TV via HDMI connections Cables used for connections Audio and video cable (sold separately) HDMI cable (ARC) IN HDMI TV • Video signals are not output if the input video signals do not match the monitor’s resolution.
10 Connecting an HDMI-compatible device OUT HDMI G Front panel H Digital camcorder • When this unit is connected to other devices with HDMI cables, connect this unit and TV also with an HDMI cable.
11 Connecting an HDMI-compatible device n Deep Color ( v page147 ) When a device supporting Deep Color is connected, use a cable compatible with “High Speed HDMI cable” or “High Speed HDMI cable with Ethernet”. n Auto Lip Sync ( v page112 , 147 ) n “x.
12 Connecting an HDMI-incompatible device For high quality video and surround playback, it is recommended to use an HDMI cable to connect this unit to TV and other video devices ( v page7 “Connecting an HDMI-compatible device”). This section describes connections when your device does not support HDMI connections.
13 Connecting a TV • This section describes how to connect when your TV does not support HDMI connections. For instructions on HDMI connections, see “Connecting an HDMI-compatible device” ( v page7 ).
14 a a s a s R L R L VIDEO AUDIO OUT VIDEO OUT COAXIAL OPTIC AL OUT COMPONENT VIDEO Y P B P R OUT AUDIO R L OUT Satellite tuner/Cable TV or or or Connecting a set-top box (Satellite tuner/cable TV) This section describes how to connect when your satellite tuner or cable TV does not support HDMI connections.
15 Connecting an HDMI-incompatible device Connecting a DVD player This section describes how to connect when your DVD player does not support HDMI connections. For instructions on HDMI connections, see “Connecting an HDMI-compatible device” ( v page7 ).
16 Connecting an HDMI-incompatible device Connecting a Blu-ray Disc player This section describes how to connect when your Blu-ray disc player does not support HDMI connections. For instructions on HDMI connections, see “Connecting an HDMI-compatible device” ( v page7 ).
17 Connecting an HDMI-incompatible device Connecting a digital camcorder This section describes how to connect when your digital camcorder does not support HDMI connections. For instructions on HDMI connections, see “Connecting an HDMI-compatible device” ( v page7 ).
18 Connecting an HDMI-incompatible device Connecting a media player This section describes how to connect when your media player does not support HDMI connections. For instructions on HDMI connections, see “Connecting an HDMI-compatible device” ( v page7 ).
19 Connecting an iPod or USB memory device to the iPod/USB port • You can enjoy music stored on an iPod or USB memory device. • For operating instructions see “Playing an iPod” ( v page 36 ) or “Playing a USB memory device” ( v page39 ).
20 Connecting an HDMI-incompatible device Connecting a CD player You can enjoy CD sound. n Audio connection The following methods are available for connecting to this unit. Use either of the methods to make a connection. The numbers prefixed with connectors indicate the recommendation order.
21 Connecting an FM antenna • Connect the FM antenna supplied with the unit to enjoy listening to radio broadcasts. • After connecting the antenna and receiving a broadcast signal ( v page 42 “Listening to FM broadcasts”), fix the antenna with tape in a position where the noise level becomes minimal.
22 Connecting a wireless receiver (RX101) • You can connect a wireless receiver (RX101, sold separately) to play back music on your Bluetooth device with this unit. • To do this, switch the input source to “M-XPort” ( v page34 “Selecting the input source”).
23 Connecting a device with a multi-channel output connector • You can connect this unit to an external device fitted with multi-channel sound audio output connectors to enjoy music and video. • To play analog signals input from 7.1CH IN connectors, set “Input Mode” ( v page119 ) to “7.
24 Connecting a external power amplifier • You can use this unit as a pre-amp by connecting a commercially available power amp to the PRE OUT connector. Adding a power amp to each of the channels provides an even greater sound presence. • Select the terminal to use and connect the device.
25 Connecting to a home network (LAN) You can connect this unit to your home network (LAN) to perform various types of playbacks and operations as follows.
26 Connecting the power cord After completing all the connections, insert the power plug into the power outlet. To household power outlet (AC 120 V, 60 Hz) Power cord (supplied) NOTE • Do not plug in the power cord until all connections have been completed.
27 The acoustic characteristics of the connected speakers and listening room are measured and the optimum settings are made automatically. This is called “Audyssey ® Setup”. To perform measurement, place the setup microphone in multiple locations all around the listening area.
28 2 Set up the subwoofer If using a subwoofer capable of the following adjustments, set up the subwoofer as shown below. For details, see your subwoofer’s manual. n When using a subwoofer with a direct mode Set the direct mode to “On” and disable the volume adjustment and crossover frequency setting.
29 Preparation (Continued) Detection & Measurement (Main) Set up speakers (Audyssey ® Setup) 5 Select “Start” and then press ENTER . The subwoofer volume setting screen is displayed. Audyssey Setup Back Next Connect the calibration microphone to the SETUP MIC input on the front the AV receiver.
30 Calculation Set up speakers (Audyssey ® Setup) 11 Repeat step 10, measuring positions 3 to 8. When measurement of position 8 is completed, a “Measurements finished.” message is displayed. Audyssey Setup Repeat Last Test Calculation Measurements finished.
31 Set up speakers (Audyssey ® Setup) 14 Select “Store” and then press ENTER . Save the measurement results. Audyssey Setup Now storing...Please wait. 50% Audyssey Setup Distances Speaker Config. Levels Crossovers Store Check processing results. To proceed, press “Store”.
32 Error messages NOTE • An error message is displayed if Audyssey ® Setup could not be completed due to speaker placement, the measurement environment, etc. If an error message is displayed, check the relevant items and perform the necessary measures.
33 Parameter Check This function enables you to check the measurement results and equalizer characteristics after Audyssey ® Setup. 1 Use ui to select “Parameter Check” and then press ENTER .
34 Playback (Basic operation) Setup ( v page27 ) n Turning the power on ( v page34 ) n Selecting the input source ( v page34 ) n Adjusting the master volume ( v page35 ) n Turning off the .
35 Adjusting the master volume Use VOLUME df to adjust the volume. • The volume display method varies depending on the “Scale” setting ( v page108 ). n When the “Scale” setting ( v page108 ) is “0 – 98” G Adjustable range H 0.
36 Playing an iPod You can use the USB cable provided with the iPod to connect the iPod with the unit’s iPod/USB port and enjoy music stored on the iPod. For information on the iPod models that can be played back with this unit, see “Connecting an iPod or USB memory device to the iPod/USB port” ( v page19 ).
37 Playing an iPod n Setting “Remote Mode” (Operation Mode) In this mode, various lists and screens during playback on iPod are displayed on the TV screen. This section describes the steps up to playing back tracks on iPod in “Remote Mode”. 1 Press iPod/USB to switch the input source to “iPod/ USB”.
38 Playing an iPod n Performing repeat playback (Repeat) 1 Press OPTION while in Remote Mode. The option menu screen is displayed. 2 Use ui to select “Repeat”, then press ENTER . OPTION iPod Title Now Playing Artist Album 00:06 100% Previous Option Pause Next Back Repeat Option Random Operation Mode 3 Use o p to select repeat playback mode.
39 Playing a USB memory device Playing back music or still picture (JPEG) files recorded on a USB memory device. Important information • Only USB memory devices conforming to mass storage class and MTP (Media Transfer Protocol) standards can be played on this unit.
40 Playing files stored on USB memory devices 1 Connect the USB memory device to the iPod/USB port ( v page 19 ). 2 Press iPod/USB to switch the input source to “iPod/USB”. D&M1 D&M2 D&M3 Music1 Music2 Music3 Music4 OPTION USB [1/9] Option 3 Use ui to select the search item or folder, then press ENTER or p .
41 Playing a USB memory device n USB memory device operation buttons Operation buttons Function CH/PAGE df Page search INFO Display of information such as the source name, volume, and sound mode name .
42 Listening to FM broadcasts For antenna connections, see “Connecting an FM antenna” ( v page21 ). How to tune in The modes for receiving FM broadcasts consists of “Auto” mode that automatically searches available broadcast stations and “Manual” mode that lets you tune in using buttons to change the frequency.
43 Listening to FM broadcasts n Changing the tuning mode (Tune Mode) You can change the mode for tuning into FM broadcasts. If you cannot tune in automatically with “Auto” mode, then change the mode to “Manual” and tune in manually. 1 Press TUNER to switch the input source to “FM”.
44 Listening to FM broadcasts n Tuning in by entering the radio frequency (Direct Tune) You can enter the receiving frequency directly to tune in. 1 Press TUNER to switch the input source to “FM”. 2 Press OPTION . The option menu screen is displayed.
45 Listening to FM broadcasts Presetting broadcast stations n Tuning in to radio stations and presetting them automatically (Auto Preset Memory) Up to 56 stations can be preset. If “Auto Preset Memory” is performed after performing “Preset Memory”, the “Preset Memory” settings will be overwritten.
46 n Presetting the current broadcast station (Preset Memory) Your favorite broadcast stations can be preset so that you can tune them in easily. Up to 56 stations can be preset. 1 Tune in the broadcast station you want to preset. 2 Press OPTION . The option menu screen is displayed.
47 Listening to FM broadcasts n Specify a name for the preset broadcast station (Preset Name) You can set the name to the preset broadcast station or change it. Up to eight characters can be input. 1 Press TUNER to switch the input source to “FM”.
48 n Skipping preset broadcast stations (Preset Skip) You can set in advance, the stations you do not want to be displayed when tuning in, by groups or by stations. The preset skip setting is useful when tuning in, because only your favorite stations are displayed.
49 Listening to FM broadcasts Cancelling preset skip 1 While the Preset Skip screen is displayed, use o p to select a group containing a broadcast station to cancel the skip for. 2 Use ui to select a broadcast station to cancel the skip for. G TV Screen H TUNE+/- STEREO AUTO CH / OPTION FM CH 1 FM 87.
50 Listening to internet radio Internet radio refers to radio broadcasts distributed over the Internet. Internet radio stations from around the world can be received. Important information The broad cast station types and specifications supported by this unit for playback are as follows.
51 Listening to internet radio n Adjusting the sound quality (M-DAX) Make this setting at “M-DAX” ( v page108 ) in the menu. You can use the “M-DAX” function to restore to a state close to the audio before compression while correcting the bass feel to enjoy a richer playback experience.
52 Listening to internet radio n Using vTuner to add Internet radio stations to favorites There are many Internet radio stations in the world, and this unit can tune into these stations. But finding the radio station you want to hear may be difficult, because there are too many stations.
53 Playing back files stored on a PC and NAS This unit can play back music files and playlists (m3u, wpl) stored on a PC and on Network Attached Storage (NAS) that supports DLNA. Important information • The network audio playback function of this unit connects to the server using technologies shown below.
54 Playing back files stored on a PC and NAS Applying media sharing settings Here, we apply the settings to share music files stored on a PC and NAS on the network. n Sharing media stored in PC If you are using a media server, be sure to apply this setting first.
55 Playing back files stored on a PC and NAS Playing back files stored on a PC and NAS Use this procedure to play music files, image files or playlists. 1 Prepare for playback. q Check the network environment, then turn on this unit’s power ( v page 25 “Connecting to a home network (LAN)”).
56 Playing back files stored on a PC and NAS Operations available through the OPTION button Press the OPTION button to display a menu of functions that can be used on the TV screen. Select the function you want to use from this menu. You can easily find and use the desired function.
57 Using online services This unit supports playback of the online services shown below. n About Flickr ( v page58 ) Flickr is an online photograph sharing service that started in 2004. You can use the this unit to view photographs that have been made public by Flickr users.
58 Using online services Viewing photographs on the Flickr site You can view photographs shared by particular users, or all of the photographs shared on Flickr.
59 Using online services n Viewing all photographs on Flickr 1 Use ui to select “All Content”, then press ENTER or p . OPTION Flickr [1/2] Add Flickr Contact All Content Option 2 Use ui to select the folder, and then press ENTER or p .
60 Using online services Listening to Pandora ® 1 Prepare for playback. q Check the network environment, then turn on this unit’s power ( v page 25 “Connecting to a home network (LAN)”). w If settings are required, make the “Settings” ( v page126 ).
61 Using online services n Creating a new station You can create up to 100 radio stations. 1 Use ui to select “New Station”, then press ENTER or p . BACK My Station [1/3] Sign out Exit New Station Quick Mix D&M1 Radio 2 Input a track or artist name, then press O K .
62 Using online services n Giving Feedback and Managing Stations You can personalize your stations by providing feedback. Press p while a track is playing.
63 Using online services Listening to SiriusXM Internet Radio Over 120 channels of the SiriusXM programming you love, including commercial-free music plus sports, talk, news and entertainment. Listen anywhere on your computer or smartphone. 1 Prepare for playback.
64 Using online services n Sign out Disassociate this unit from your SiriusXM account. 1 While the SiriusXM top menu is displayed, press BACK . 2 When the popup menu appears, use o p to select “Yes”, then press ENTER .
65 Convenient functions Here, we explain how to use convenient functions for NETWORK sources and USB sources. The source names under the titles of each function’s description are sources that allow use of these functions.
66 Convenient functions Performing repeat playback (Repeat) USB Media Server 1 While content is playing, press OPTION . The option menu screen is displayed.
67 Convenient functions Favorites function There are two ways to add content to favorites: q Add to favorites from the Option menu w Add to the FAVORITE STATION button n Add to favorites from the Option menu (Favorite Memory) Internet Radio Media Server You can add up to 100 items as favorites for all sources (Internet Radio and Media Server).
68 Convenient functions n Deleting content added to favorites (Remove Favorites) 1 Press NETWORK . 2 Use uio p to select “Favorites”, then press ENTER . Favorites Internet Radio Media Server Network 3 Use ui to select the content you want to delete from favorites, then press OPTION .
69 AirPlay function Enjoy music from your iTunes library with high quality sound anywhere in your home. Use the Apple Remote app z for iPhone, iPod touch and iPad to control iTunes from any room in your home. z Available as a free download from the App Store.
70 AirPlay function n Perform iTunes playback operations with the remote control unit of this unit With this unit’s remote control unit, you can perform iTunes song play, pause, and auto search (cue) operations. 1 Select “Edit” – “Preferences.
71 Selecting a listening mode (Sound Mode) This unit allows you to enjoy various kinds of surround and stereo playbacks. Multi-channel audio formats are adopted by many of the contents including Blu-ray disc and DVD as well as digital broadcasting and Internet-delivered movies and music.
72 Selecting a listening mode n Listening mode • The following listening modes can be selected using the MOVIE , MUSIC , GAME , and PURE buttons. • Adjust the sound field effect with the menu “Surround Parameter” ( v page106 ) to enjoy your favorite sound mode.
73 Selecting a listening mode Operation button Input signal Listening mode 2-channel z 1 STEREO AUTO z 2 DOLBY PL g x Game z 3 DOLBY PL g Game z 3 DOLBY PL g z Height z 3 MULTI CH STEREO VIRTUAL Multi.
74 Selecting a listening mode n Description of listening mode types Dolby listening mode Listening mode type Description DOLBY PL g x z 1 This mode can be selected when a Dolby Pro Logic g x decoder is used to play back 2-channel source in 6.1/7.1-channel surround sound including the surround back channel.
75 Selecting a listening mode Original listening mode Listening mode type Description MULTI CH STEREO This mode is for enjoying stereo sound from all speakers. The same sound as that from the front speakers (L/R) is played back at the same level from the surround speakers (L/R) and surround back speakers (L/R).
Advanced version 76 F Installation/connection/setup of speakers (Advanced) v page77 F Connections (Advanced connection) v page89 F Playback (Advanced operation) v page91 F Playback in ZONE2 (.
77 Procedure for speaker settings Speaker installation Speaker connection ( v page79 ) Set up speakers ( v page87 ) Speaker installation • Determine the speaker system depending on the number of speakers you are using and install each speaker and subwoofer in the room.
78 Speaker installation When 7.1ch speakers are installed using front height speakers FL FR FHR FHL C SL SR SW z 1 z 2 z 3 Listening position z 1 22˚ – 30˚ z 2 22˚ – 45˚ z 3 90˚ – 110˚ G S.
79 Speaker connection Here, we connect the speakers in the room to this unit. This section explains how to connect them using a typical example. n Connecting 7.1-channel speakers using surround back speakers ( v page80 ) n Connecting 7.1-channel speakers using front height speakers ( v page81 ) n Connecting 6.
80 Speaker connection Connecting 7.1-channel speakers using surround back speakers The illustration on the right shows a connection example for performing 7.
81 FL FR C SL SR SW FHR FHL Connecting 7.1-channel speakers using front height speakers The illustration on the right shows a connection example for performing 7.
82 Speaker connection Connecting 6.1-channel speakers using one surround back speaker If using only one surround back speaker, connect to the “L” side of the SURROUND BACK terminal. For speaker settings in this case, see “When 6.1ch speakers are installed” ( v page78 ).
83 Speaker connection SL SR FL FR C SW Connecting 5.1-channel speakers To perform 5.1-channel playback, set “Assign Mode” to “Surround Back” in steps 3 to 5 for “Set up “Amp Assign”” ( v page87 ).
84 Speaker connection FL(A) FL(B) FR(B) FR(A) SW Connecting front A/B speakers You can connect a second set of speakers to this unit and use them for playback. In this case, set “Assign Mode” to “Front B” in steps 3 to 5 for “Set up “Amp Assign”” ( v page87 ).
85 Speaker connection FL FR SW Connecting 2.1-channel speakers Cables used for connections Audio cable (sold separately) Speaker cable Subwoofer cable NOTE • For speaker cable connections, see page79 . • For speaker impedance , see page79 .
86 Speaker connection FL FR SW w q w q (R) (L) Connecting front speakers with a bi-amp connection • You cannot use surround back speakers in a bi-amp connection. Use front speakers that support a bi-amp connection and connect the speakers to the FRONT speaker terminals and the SURROUND BACK speaker terminals.
87 1 Set up the remote control unit n Set up the zone mode Press MAIN to switch the zone mode to the MAIN ZONE. MAIN lights. Press MAIN 2 Connect the setup microphone. Audyssey Setup Amp Assign Channel Select Start Your AV receiver can automatically measure the acoustics of your room then optimize your speakers using the included microphone.
88 Set up speakers 7 Set up “Channel Select” Use ui to select “Channel Select”, and then press ENTER . Channel Select Subwoofer Measure Surround Back Measure (2 spkrs) Audyssey Setup Amp Assig.
89 Connections (Advanced connection) Connecting the REMOTE CONTROL connectors Performing operations on this unit and external devices • You can connect an IR receiver to this unit to perform operations on this unit and external devices with the supplied remote control unit.
90 Connecting an external control device RS-232C connector When you connect an external control device, you can control this unit with the external control device (such as power supply operation, volume adjustment, and input source switching). External serial controller Perform the operation below beforehand.
91 Setup ( v page27 ) Playback (Basic operation) ( v page34 ) Selecting a listening mode (Sound Mode) ( v page71 ) Connections (Advanced connection) ( v page89 ) n HDMI control function ( .
92 HDMI control function NOTE • When “HDMI Control” is set to “On”, it consumes more standby power. • The HDMI control function controls operations of a TV that is compatible with the HDMI control function. Make sure that the TV and HDMI are connected when you perform HDMI control.
93 Web control function You can control this unit from a web control screen on a web browser. • This unit and the PC need to be connected to the network properly ( v page 25 “Connecting to a home network (LAN)”) in order to use the web control function.
94 Web control function G Example 2 H Setup menu screen VIDEO AUDIO PICTURE ADJUST HDMI SETUP OUTPUT SETTINGS VOLUME DISPLA Y INFO. DISPLA Y AUDIO DISPLA Y TV FORMA T VIDEO INPUTS SPEAKERS NETWORK USE.
95 Panel lock function To prevent accidental operation of this unit, you can disable operation of the buttons on the front panel. DISPLA Y PRESET CH + X ON/ST ANDBY PRESET CH – M-DAX ST A TUS n Disabling all key button operations 1 Press X ON/STANDBY while you press and hold DISPLAY and M-DAX with the unit in standby mode.
96 Panel lock function n Canceling the Panel lock function 1 Press X ON/STANDBY while you press and hold DISPLAY and M-DAX with the unit in standby mode. 2 Press PRESET CH + or PRESET CH – to select “FP LOCK z Off”. ( z The currently set mode.) 3 Press STATUS to enter the setting.
97 Various memory functions Personal memory plus function This function sets the settings (input mode, sound mode, HDMI output mode, MultEQ ® XT, Dynamic EQ, audio delay etc.) last selected for the individual input sources. The surround parameters, tone settings and the volumes of the different speakers are stored for the individual sound modes.
98 Playback in ZONE2 (Separate room) • You can operate this unit so as to enjoy audio in a room (ZONE2) other than the MAIN ZONE (room where the unit is located). • You can simultaneously play back the same source in both the MAIN ZONE and ZONE2.
99 Sleep timer function • This is convenient for viewing and listening while going to sleep in ZONE2. • The sleep timer function can be set by zone. 1 Press ZONE2 to switch the zone mode to the ZONE2. ZONE2 lights. 2 Press SLEEP and display the time you want to set.
10 0 Menu map For menu operation, connect a TV to this unit and display the menu on the TV screen. For menu operations, see the following page. By default, this unit has recommended settings defined. You can customize this unit based on your existing system and your preferences.
101 Menu map Setting items Detailed items Description Page General Language Sets the language for display the menu on the TV screen. 129 ZONE2 Setup Makes settings for audio playback in a ZONE2 system. 129 Zone Rename Change the display title of each zone to one you prefer.
10 2 Examples of menu screen displays Typical examples are described below. G Example 1 H Menu selection screen (Top menu) Audio [1/2] Surround Parameter Tone Dialogue Level Subwoofer Level M-DAX Audi.
10 3 Examples of menu Below we describe typical examples of displays on the TV screen. Menu display Description Top menu display Setup Menu Audio Video Inputs Speakers Network General Setup Assistant w q Press SETUP to display the menu screen. w Displays the selected line.
10 4 Inputting characters On this unit, you can change the name displayed on the following screens to the names that you prefer. • Text Search ( v page65 ) • Preset Name ( v page47 ) .
10 5 Audio Make audio-related settings. Menu operation 1 Press MAIN to switch the zone mode to the MAIN ZONE. MAIN lights. 2 Press SETUP . The menu is displayed on the TV screen. 3 Use ui to select the menu to be set or operated. 4 Press ENTER or p to enter the setting.
10 6 Setting items Setting details Low Frequency Effects Adjust the low-frequency effects level (LFE). n When “Input Mode” ( v page119 ) is set other than to “7.1CH IN” –10dB – 0dB n When “Input Mode” ( v page119 ) is set to “7.
10 7 Dialogue Level Default settings are underlined. Sets the output level to clarify the dialogue output from the center channel. Setting items Setting details Dialogue –12dB – +12dB (0dB) Subwoofer Level Default settings are underlined. Sets the subwoofer on/off and its output level.
10 8 Audio Delay Default settings are underlined. While viewing video, manually adjust the time to delay audio output. Setting details 0ms – 200ms • This item can be set within the range of 0 to 100 ms when “Auto Lip Sync” ( v page 112 ) is set to “On” and when a TV compatible with Auto Lip Sync is connected.
10 9 Audio Audyssey Default settings are underlined. Set Audyssey MultEQ ® XT, Audyssey Dynamic EQ ® and Audyssey Dynamic Volume ® . These can be selected after Audyssey ® Setup has been performed. For additional information on Audyssey technology, please see page147 .
11 0 Audio Setting items Setting details Dynamic Volume Solve the problem of large variations in volume level between TV, movies and other content (between quiet passages and loud passages, etc.) by automatically adjusting to the user’s preferred volume setting.
111 Video Make video-related settings. Menu operation 1 Press MAIN to switch the zone mode to the MAIN ZONE. MAIN lights. 2 Press SETUP . The menu is displayed on the TV screen. 3 Use ui to select the menu to be set or operated. 4 Press ENTER or p to enter the setting.
11 2 Video Picture Adjust Default settings are underlined. Picture quality can be adjusted. We recommend leaving the settings unchanged from the default settings. First adjust the display image quality on your TV, and use this menu only when you want to make fine adjustments.
11 3 Video Setting items Setting details Standby Source Sets the HDMI input source to put into standby when the power is on. Last : Enters standby with the previously used input source. CBL/SAT / DVD / Blu-ray / GAME / AUX / MEDIA PLAYER / CD : Enters standby with each of the input sources assigned to each input terminal.
11 4 Video Setting items Setting details Resolution Set the output resolution. You can set “Resolution” separately for HDMI output of the analog video input and HDMI input.
11 5 Video Audio Display Default settings are underlined. Sets how long each menu is displayed when the input source is “NETWORK”, “iPod/USB”, or “FM”. Setting items Setting details Audio Always : Show display continuously. 30s : Show display for 30 seconds after operation.
11 6 Inputs Perform settings related to input source playback. • You do not have to change the settings to use the unit. Make settings when needed. Menu operation 1 Press MAIN to switch the zone mode to the MAIN ZONE. MAIN lights. 2 Press SETUP .
11 7 Setting items Setting details HDMI Set this to change the HDMI input connectors assigned to the input sources. CBL/SAT DVD Blu-ray GAME AUX MEDIA PLAYER CD TV AUDIO HDMI 1 / HDMI 2 / HDMI 3 / HDMI 4 / HDMI 5 / HDMI 6 : Assign an HDMI input connector to the selected input source.
11 8 Setting items Setting details DIGITAL Set this to change the digital input connectors assigned to the input sources. CBL/SAT DVD Blu-ray GAME AUX MEDIA PLAYER CD TV AUDIO COAX 1, 2 / OPT 1, 2 : Assign a digital input connector to the selected input source.
11 9 Inputs Source Level Default settings are underlined. • This function corrects the playback level of the selected input source’s audio input. • Make this setting if there are differences in the input volume levels between the different sources.
12 0 Speakers Set when changing Audyssey ® Setup settings. • If you change the speaker settings after performing Audyssey ® Setup, it will not be possible to set Audyssey MultEQ ® XT, Audyssey Dynamic EQ ® and Audyssey Dynamic Volume ® ( v page109 ).
12 1 Manual Setup Default settings are underlined. Perform when setting the speakers manually or when changing settings made in Audyssey ® Setup. • If you change the speaker settings after perfo.
12 2 Setting items Setting details Distances Set distance from listening position to speakers. Measure beforehand the distance from the listening position to each speaker. Unit : Set the unit of distance. • Feet / Meters Step : Set the minimum variable width of the distance.
12 3 Speakers Setting items Setting details Levels Set the volume of the test tone to be the same when it is output from each speaker. Test Tone Start : Output test tone. • Front L / F.Height L / Center / F. Height R / Front R / Surround R / Surr.
12 4 Network To use this unit by connecting it to a home network (LAN), you must configure network settings. If you set up your home network (LAN) via DHCP, set “DHCP” to “On” (use the default setting). This allows this unit to use your home network (LAN).
12 5 Information Display network information. Setting details Friendly Name / DHCP=On or Off / IP Address / MAC Address MAC Address is required to make a vTuner account. IP Control Default settings are underlined. Set the network function on/off during standby.
12 6 Network Settings Default settings are underlined. Make settings for wired LAN. Only set “Settings” when connecting to a network without a DHCP function.
12 7 Network Setting details n Proxy settings Make this setting when connecting to the Internet via a proxy server. Make the proxy settings only when you connect to the Internet via a proxy server that is on your internal network or provided by your provider, etc.
12 8 General Make various other settings. Menu operation 1 Press MAIN to switch the zone mode to the MAIN ZONE. MAIN lights. 2 Press SETUP . The menu is displayed on the TV screen. 3 Use ui to select the menu to be set or operated. 4 Press ENTER or p to enter the setting.
12 9 General Language Default settings are underlined. Set the language for display on the menu screen. Setting details English / Français / Español “Language” can also be set by the following procedure. However, the menu screen is not displayed.
13 0 Auto Standby Default settings are underlined. When you do not perform any operation on this unit with no audio or video input for a specified time, this unit automatically enters the standby mode. Before it enters the standby mode, “Auto Standby” is displayed on the display of this unit and the menu screen.
13 1 Items Setting details ZONE Show information about current settings. MAIN ZONE : This item shows information about settings for MAIN ZONE. The information displayed differs according to the input source.
13 2 General Setting items Setting details Notifications Displays a notification message on this unit’s menu screen when the latest firmware is released with “Update”. Display a notification message on this unit’s menu screen when downloadable firmware is released with “Add New Feature”.
13 3 General Setup Lock Default settings are underlined. Protect settings from inadvertent change. Setting items Setting details Lock On : Turn protection on. Off : Turn protection off. When canceling the setting, set “Lock” to “Off”. NOTE When “Lock” is set to “On”, the settings listed below can no longer be changed.
Informations 13 4 F Part names and functions v page135 F Other information v page140 F Troubleshooting v page150 F Specifications v page155 F Index v page156 Informations Here, we list various information related to this unit. Please refer to this information as needed.
13 5 Front panel For buttons not explained here, see the page indicated in parentheses ( ). W1 Q8 Q9 W0 Q7 Q6 Q5 Q3 r t y u i o Q0 Q1 Q2 Q4 w q e q STANDBY indicator ·················.
13 6 Display The input source name, surround mode, setting values and other information are displayed here. n Standard display q w q Master volume indicator w Input source indicator The currently selected input source name is displayed.
13 7 Rear panel See the page indicated in parentheses ( ). Q0 q w e r t y o i u Q1 Q3 Q5 Q4 Q6 Q2 q RC-232C connector ·········································.
13 8 Remote control unit For buttons not explained here, see the page indicated in parentheses ( ). Q2 o Q0 i Q3 Q6 Q7 Q5 Q1 Q4 t y u r e w q q ZONE SELECT buttons (MAIN, ZONE2) ···········.
13 9 Remote control unit Inserting the batteries q Remove the rear lid in the direction of the arrow and remove it. w Load the two batteries properly as indicated by the marks in the battery compartment. R03/AAA e Put the rear cover back on. NOTE • Insert the specified batteries in the remote control unit.
14 0 Other information n Trademark information ( v page140 ) n Surround ( v page141 ) n Relationship between video signals and monitor output ( v page145 ) n Explanation of terms ( v page147 ) Trademark information This product uses the following technologies (Random order): Manufactured under license from Audyssey Laboratories™.
14 1 Surround This unit is equipped with a digital signal processing circuit that lets you play program sources in the sound mode to achieve the same sense of presence as in a movie theater.
14 2 Surround Sound Mode ( v page71 ) Surround Parameter ( v page106 ) Subwoofer ( v page107 ) Tone z 11 ( v page107 ) Audyssey z 12 ( v page109 ) M-DAX z 14 ( v page108 ) PRO LOGIC .
14 3 Surround n Types of input signals, and corresponding sound modes This table shows the input signal that can be played in each sound mode. Check the audio signal of the input source then select the sound mode. Symbols in the table F This indicates the default sound mode.
14 4 Surround Sound Mode ( v page71 ) NOTE Input signal types and formats ANALOG PCM DTS-HD DTS DOLBY DOLBY DIGITAL PCM (multi ch) PCM (2ch) DTS-HD Master Audio DTS-HD High Resolution Audio DTS EXPRESS DTS ES DSCRT (With Flag) DTS ES MTRX (With Flag) DTS (5.
14 5 Relationship between video signals and monitor output MAIN ZONE MONITOR OUT Video Conversion Input connector Output connector Menu displayed HDMI COMPONENT VIDEO HDMI COMPONENT VIDEO HDMI COMPONE.
14 6 Video signal resolution conversion table When “Video Conversion” ( v page113 ) is set to “On”, “i/p Scaler” ( v page 113 ) is set to “Analog”, “Analog & HDMI” or “.
14 7 Explanation of terms A A2DP A2DP is one profile of Bluetooth definded for in-car devices or AV devices that use wireless communication instead of a cable. Adobe RGB color, Adobe YCC601 color The color space defined by Adobe Systems Inc. Because it is a wider color space than RGB, it can produce more vivid and natural images.
14 8 DTS Express DTS Express is an audio format supporting low bit rates (max. 5.1 channels, 24 to 256 kbps). DTS-HD This audio technology provides higher sound quality and enhanced functionality than the conventional DTS and is adopted as an optional audio for Blu-ray Disc.
14 9 V vTuner This is a free online content server for Internet radio. Note that usage fees are included in upgrade costs. For inquiries about this service, visit the vTuner site below. vTuner website: http://www.radiomarantz.com This product is protected by certain intellectual property rights of Nothing Else Matters Software and BridgeCo.
15 0 Troubleshooting If a problem should arise, first check the following: 1. Are the connections correct? 2. Is the set being operated as described in the owner’s manual? 3. Are the other devices operating properly? If this unit does not operate properly, check the items listed in the table below.
15 1 G Audio H Symptom Cause/Solution Page Audio is not output. • Check the connections for all devices. • Check the speaker connections and configurations. • Check whether the audio device power is turned on. • Adjust the master volume.
15 2 G FM H Symptom Cause/Solution Page Reception fails, or there is a lot of noise or distortion. • Change the antenna orientation or position. • Use an FM outdoor antenna.
15 3 Symptom Cause/Solution Page For some radio stations, “Radio station server full” or “Connection down” is displayed and station cannot be connected to. • Station is congested or not currently broadcasting. Wait a while before trying again.
15 4 Resetting the microprocessor Perform this procedure if the display is abnormal or if operations cannot be performed. When the microprocessor is reset, all the settings are reset to their default values. PRESET CH + X ON/ST ANDBY PRESET CH – 1 Turn off the power using X .
15 5 Specifications n Audio section • Power amplifier Rated output: Front: 100 W + 100 W (8 Ω, 20 Hz – 20 kHz with 0.08 % T.H.D.) Center: 100 W (8 Ω, 20 Hz – 20 kHz with 0.08 % T.H.D.) Surround: 100 W + 100 W (8 Ω, 20 Hz – 20 kHz with 0.
15 6 v Numerics 2.1-channel ························································· 85 3D ······································································· 11 5.
15 7 v P Pairing ······························································ 148 Pandora ® ·····················.
15 8 Dimensions Unit : in. (mm) 11 47/64 (298.0) 13 13/64 (335.2) 6 15/32 (164.5) 2 33/64 (64.0) 2 47/64 (69.5) 33/64 (13.0) 5 53/64 (148.0) 6 11/32 (161.0) 17 21/64 (440.0) 13 25/64 (340.0) 2 11/64 (55.0) 1 31/32 (50.0) 1 31/32 (50.0) 5/8 (15.7) 27/32 (21.
D&M Holdings Inc. 3520 10096 00AM V00.
Un punto importante, dopo l’acquisto del dispositivo (o anche prima di acquisto) è quello di leggere il manuale. Dobbiamo farlo per diversi motivi semplici:
Se non hai ancora comprato il Marantz SR5007 è un buon momento per familiarizzare con i dati di base del prodotto. Prime consultare le pagine iniziali del manuale d’uso, che si trova al di sopra. Dovresti trovare lì i dati tecnici più importanti del Marantz SR5007 - in questo modo è possibile verificare se l’apparecchio soddisfa le tue esigenze. Esplorando le pagine segenti del manuali d’uso Marantz SR5007 imparerai tutte le caratteristiche del prodotto e le informazioni sul suo funzionamento. Le informazioni sul Marantz SR5007 ti aiuteranno sicuramente a prendere una decisione relativa all’acquisto.
In una situazione in cui hai già il Marantz SR5007, ma non hai ancora letto il manuale d’uso, dovresti farlo per le ragioni sopra descritte. Saprai quindi se hai correttamente usato le funzioni disponibili, e se hai commesso errori che possono ridurre la durata di vita del Marantz SR5007.
Tuttavia, uno dei ruoli più importanti per l’utente svolti dal manuale d’uso è quello di aiutare a risolvere i problemi con il Marantz SR5007. Quasi sempre, ci troverai Troubleshooting, cioè i guasti più frequenti e malfunzionamenti del dispositivo Marantz SR5007 insieme con le istruzioni su come risolverli. Anche se non si riesci a risolvere il problema, il manuale d’uso ti mostrerà il percorso di ulteriori procedimenti – il contatto con il centro servizio clienti o il servizio più vicino.
