Manuale d’uso / di manutenzione del prodotto WAP-6102 del fabbricante LevelOne
Vai alla pagina of 53
W AP-6102 300Mbps N_Max Wireless Ceiling PoE Access Point User Manual V1.0.
I Notice FCC W arning Changes or modifications to this unit not ex pressly approved by the party responsible for compliance could void the user aut hority to operate the equipment.
II CE Statement LEVEL ONE hereby declares that this devic e is in compliance with the essential requirement and other relevant provisio ns of the R&TTE Directive 1999/5/EC.
III T able of Content 1. Introduction .................................................................................................................................. 1 1.1. Features and Benefits .....................................................
1 1. Introduction W AP-6102 is a powerful and multi-functioned 1 1n Access Point and it can act three modes AP/WDS/Universal Repeater . Smoke detector appearan ce will minimize visibility .
2 1.2. Package Content s The package cont ains the following items. In ca se of return, please keep the original box set, and the complete box set must be included for full refund.
2. W eb Configuration 2.1. System 2.1.1. Operation Mode You are allowed to configure WAP-6102 in to different modes: AP, WDS Bridge and Universal Repeater. AP/WDS/Universal Repeater Access Point In AP (Access Point) mode, your device ac t s as a communication hub for users with a wireless device to connect to a wired LAN/W AN.
Universal Repeater Repeater is used to regenerate or replicate si gnals that are weakened or distorted by transmission over long distances and through areas with high levels of electromagnetic interference (EMI).
2.1.3. DHCP 2.1.4. Schedule 5.
2.1.5. Event Log 6.
2.1.6. Monitor The device will record the router trans mission status in a time span. Det ail: Click into detail to see historical record. 7.
Det ail: 8.
2.2. W ireless 2.2.1 Access Point Configuration Please click System Operation Mode and Select Access Point before you start the configuration AP Mode T o configure AP Mode, please select Access Point in ( System Operation Mode ) ( Please refer to: 2.
S t atus Basic 10.
Radio : To enable/disable radio frequency. Mode : Select and define your device in AP mode or WDS mode Mode : AP To define your AP as a regular AP Mode: WDS (AP+WDS) To define your device work in WDS + AP function, this mode is to interlink this device with other AP devices in Wireless Dist ribution System.
Advanced 12.
13 Fragment Threshold: Packets over the specified size w ill be fragmented in order to improve performance on noisy networks. Specify a va lue b etween 256 and 2346.
Security Encryption: Disabled 14.
Encryption: WEP 15.
16 ESSID Selection : As this device supports multiple SSIDs, it is possible to configure a different security mode for each SSID (profile). Sele ct an SSID from the drop-down list. Broadcast SSID : Select Enable or Disable from the drop-down list.
Encryption: WP A pre-shared key ESSID Selection : As this device supports multiple SSIDs, it is possible to configure a different security mode for each SSID (profile). Sele ct an SSID from the drop-down list. Broadcast SSID : Select Enable or Disable from the drop-down list.
Encryption: WP A RADIUS ESSID Selection : As this device supports multiple SSIDs, it is possible to configure a different security mode for each SSID (profile). Sele ct an SSID from the drop-down list. Broadcast SSID : Select Enable or Disable from the drop-down list.
Filter WPS 19.
20 WPS Current S tatus: Display current configuration is configured or un-configured. The default setting will display un-configured status but if any of following occur will display configured status : 1. Configuration by an external registrar . 2.
Client List VLAN Only Available in AP mode Virtual LAN : Choose to Enable or Dis able the VLAN features. SSID1 Tag : Specify the VLAN tag. 21.
2.2.2 WDS Bridge Configuration Y ou can only connect to the device via Wireless Client Please click System Operation Mode and Select WDS Bridge before you start the configuration WDS Mode T o configure WDS Mode, pleas e select WDS Bridge in ( System Operation Mode ) ( Please refer to: 2.
Basic Radio : To enable/disable radio frequency. Mode : WDS mode allows you to interlink with other AP devices. Setting MAC address and encryption algorithm. Band: Configure the device into different wireless modes. 2.4 GHz (B) 2.4 GHz (N) 2.
Advanced Fragment Threshold: Packets over the specified size w ill be fragmented in order to improve performance on noisy networks. Specify a va lue b etween 256 and 2346.
Security Encryption: Security: Disabled Encryption: WEP Key Length : Select a 64-bit or 128-bit WEP key length from the drop-down list. a longer key may choose one of your 4 different WEP keys from below. Key Format : Select a key type from the drop-down list.
Encryption: WP A pre-shared key WPA Ty pe : Select TKIP, AES, or WPA2 Mixed. The encryption algor ithm used to secure the data communication. TKIP (Temporal Key Integrity Prot ocol) provides per-packet key generation and is based on WEP. AES (Advanced Encryption Standard) is a very secure block based encryption.
2.2.3 Universal Repeater Configuration Please click System => Operation Mode and Select Universal Repeater Before you start the configuration Repeater Mode T o configure Repeater Mode, please select Universal Repeater in ( System Operation Mode ) ( Please refer to: 2.
S t atus Basic 28.
Radio : To enable/disable radio frequency. Mode : Universal Repeater Band: Configure the device into different wireless modes. 2.4 GHz (B) 2.
30 Fragment Threshold: Packets over the specified size w ill be fragmented in order to improve performance on noisy networks. Specify a va lue b etween 256 and 2346.
Security Encryption: Disabled Encryption: WEP 31.
32 ESSID Selection : As this device supports multiple SSIDs, it is possible to configure a different security mode for each SSID (profile). Sele ct an SSID from the drop-down list. Broadcast SSID : Select Enable or Disable from the drop-down list.
Encryption: WP A pre-shared key ESSID Selection : As this device supports multiple SSIDs, it is possible to configure a different security mode for each SSID (profile). Sele ct an SSID from the drop-down list. Broadcast SSID : Select Enable or Disable from the drop-down list.
Filter WPS 34.
WPS Current S tatus: Display current configuration is configured or un-configured. The default setting will display un-configured status but if any of following occur will display configured status : 1. Configuration by an external registrar . 2. Automatic configuration by internal regi strar .
2.3. Network 2.3.1. Stat u s 36.
2.3.2. LAN 37.
38 Bridge Type: Select Static IP or Dynamic IP fr om the drop-down list. If you select Static IP, you will be required to specif y an IP address and subnet mask. If Dynamic IP is selected, then the IP address is rece ived automatically from the external DHCP server.
Dynamic IP (Only work with AP Mode) Bridge Type: Select Static IP or Dynamic IP fr om the drop-down list. If you select Static IP, you will be required to specif y an IP address and subnet mask. If Dynamic IP is selected, then the IP address is rece ived automatically from the external DHCP server.
2.4. Management 2.4.1. Admin Change current login password of the devic e. It is recommended to change the default password for security reasons. 40.
2.4.2. SNMP Allows you to assign the contact det ails, location, community name and trap settings for SNMP . This is a networking management prot ocol used to monitor network-attached devices. SNMP allows messages (called protocol data units) to be sent to various p arts of a network.
2.4.3. Firmware Allows you to upgrade the firmware of the device in order to improve the functionality and performance. Ensure that you have downloaded the appr opriate firmware from the vendor ’s website. Connect the device to your PC using an Ether net cable, as the firmware cannot be upgraded with wireless interface.
2.4.5. Reset This will only reset you devices with current configuration unaf fected. 43.
2.5. T ools 2.5.1. T ime Setting This feature allows you to c onfigure, update, and maintain the correct time on the device’s internal system clock as well as configure the time zone. The date and time of the device can be configured manually or by syn chronizing with a time server.
2.5.2. Power Saving (Only work w ith AP Mode) 2.5.3. Diagnosis Check whether a network destination is reachable with ping service. 45.
2.5.4. LED Control 2.6. Logout 46.
47 Appendix A – SPECIFICATIONS Frequency B and 2.400 ～ 2.484 GHz Media Access Protocol Carrier sense m ultiple access with collision avoidance (CSMA/CA) Modulation T echno logy - OFDM: BPSK, QPSK,.
48 Appendix B – FCC INTERFERENCE STATEMENT Federal Communication Commission Interfer ence S tatement This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules.
49 Appendix C – IC Interference S t atement Industry Canada st atement: This device complies with RSS-210 of the In dustry Canada Rules. Operation is subject to the following two conditions: (1) Thi.
Un punto importante, dopo l’acquisto del dispositivo (o anche prima di acquisto) è quello di leggere il manuale. Dobbiamo farlo per diversi motivi semplici:
Se non hai ancora comprato il LevelOne WAP-6102 è un buon momento per familiarizzare con i dati di base del prodotto. Prime consultare le pagine iniziali del manuale d’uso, che si trova al di sopra. Dovresti trovare lì i dati tecnici più importanti del LevelOne WAP-6102 - in questo modo è possibile verificare se l’apparecchio soddisfa le tue esigenze. Esplorando le pagine segenti del manuali d’uso LevelOne WAP-6102 imparerai tutte le caratteristiche del prodotto e le informazioni sul suo funzionamento. Le informazioni sul LevelOne WAP-6102 ti aiuteranno sicuramente a prendere una decisione relativa all’acquisto.
In una situazione in cui hai già il LevelOne WAP-6102, ma non hai ancora letto il manuale d’uso, dovresti farlo per le ragioni sopra descritte. Saprai quindi se hai correttamente usato le funzioni disponibili, e se hai commesso errori che possono ridurre la durata di vita del LevelOne WAP-6102.
Tuttavia, uno dei ruoli più importanti per l’utente svolti dal manuale d’uso è quello di aiutare a risolvere i problemi con il LevelOne WAP-6102. Quasi sempre, ci troverai Troubleshooting, cioè i guasti più frequenti e malfunzionamenti del dispositivo LevelOne WAP-6102 insieme con le istruzioni su come risolverli. Anche se non si riesci a risolvere il problema, il manuale d’uso ti mostrerà il percorso di ulteriori procedimenti – il contatto con il centro servizio clienti o il servizio più vicino.
