Manuale d’uso / di manutenzione del prodotto SLSLP400PS201 del fabbricante Lantronix
Vai alla pagina of 133
Part Number 900-495 Revision G November 2013 Spider™ and SpiderDuo® KVM-over-IP Device s User Guide.
Spider™ and SpiderDuo® KVM - over-IP De vice User Gu ide 2 Copyright and Trademark © 2013 Lantronix, Inc. All rights re served. No pa rt of the co ntents of this book may be transmitted or reproduced in an y form or by any means without the written perm ission of Lantronix.
Spider™ and SpiderDuo® KVM - over-IP De vice User Gu ide 3 Disclaimer and Revisions Operation of this equipment in a residential area is likely to cause interfer ence, in which cas e the user, at his or her own expense, will be required to pay for to take whatever measures may be required to correct the interference.
Spider™ and SpiderDuo® KVM - over-IP De vice User Gu ide 4 T able of Contents Copyright an d Trademark ____________ ___________ _____________ _____________ ___ 2 LINUX GPL Compliance _____ ________.
Spider™ and SpiderDuo® KVM - over-IP De vice User Gu ide 5 Client Server Setup __ _______________ ___________ __________ ___________ _______ 33 Network Environment _____ __________ _____________ __.
Spider™ and SpiderDuo® KVM - over-IP De vice User Gu ide 6 Clock and Phase _______ ______________ _____________ _____________ _______ 51 Video Encoding ___ _____________ _____________ _____________.
Spider™ and SpiderDuo® KVM - over-IP De vice User Gu ide 7 Virtual Media Optio ns __________ _____________ _____________ _____________ __ 71 Image on Windows Sh are ______ _____________ ___________.
Spider™ and SpiderDuo® KVM - over-IP De vice User Gu ide 8 10: Maintenance 96 Device Status ________________ _____________ _____________ ______________ ____ 96 Configuration _ _____________ _______.
Spider™ and SpiderDuo® KVM - over-IP De vice User Gu ide 9 Appendix E: PCU Saf ety Information 130 Cover __________ _____________ ___________ _____________ _____________ ______ 130 Power Plug _____.
Spider™ and SpiderDuo® KVM -ov er-IP Device User Guide 10 List of Figures Figure 2-1 Spider System Conf iguration ________________________ _____________ __________ 18 Figure 2-2 Spider Cab le Dimen.
Spider™ and SpiderDuo® KVM -ov er-IP Device User Guide 11 Figure 7-10 Drive Redire ction Window ____________ _____________ _____________ __________ 74 Figure 7-11 Drive Redire ct Buttons __________.
Spider™ and SpiderDuo® KVM -ov er-IP Device User Guide 12 List of T ables Table 1-1 Cha pter/Appendix and Su mmary _____________ _____________ ______________ ____ 13 Table 1-2 Conventions Used in T.
Spider™ and SpiderDuo® KVM -ov er-IP Device User Guide 13 1: About This Guide This guide describes how to in stall, configure, use, and up date the Lantr onix® Spider™ and SpiderDuo® di stributed keyboard, video, and mou se (KVM) -over-IP devices.
1: About This Guide Spider™ and SpiderDuo® KVM -ov er-IP Device User Guide 14 Conventions Table 1-2 lists and describes the conv entions used in this book. Appendix A: Troubleshooting Describes troubleshooting methods. Appendix B: Virtual Media Example Gives examples of virtual media.
1: About This Guide Spider™ and SpiderDuo® KVM -ov er-IP Device User Guide 15 Additional Document ation Visit the Lantronix web site at www.lantronix.com/su pport/documentation for the latest documentation and the following additional docum entation: Spider View User Guide —Details instructions on using the Spider View utility.
Spider™ and SpiderDuo® KVM -ov er-IP Device User Guide 16 2: Overview Lantronix Spider and SpiderDu o distributed KVM-over- IP devices are designed to rem otely and securely provide monitoring and con trol of one target computer system by one or more remote users.
2: Overview Spider™ and SpiderDuo® KVM -ov er-IP Device User Guide 17 One model with cable length of 21” One model with cable length of 58” Secure, full BIOS-level control of re mot.
2: Overview Spider™ and SpiderDuo® KVM -ov er-IP Device User Guide 18 Figure 2-1 Spider System Configu ration Figure 2-2 Spider Cable Dimens ions.
2: Overview Spider™ and SpiderDuo® KVM -ov er-IP Device User Guide 19 Technical Specifications Table 2-3 lists the components and general specifications.
2: Overview Spider™ and SpiderDuo® KVM -ov er-IP Device User Guide 20 S piderDuo Overview The SpiderDuo features, fun ctionality, syst em configuration and cables, an d technical specifications are.
2: Overview Spider™ and SpiderDuo® KVM -ov er-IP Device User Guide 21 System Configur ation and Cables Figure 2-4 shows an Spid erDuo system configurat ion, Figure 2-5 shows the PS/2 cable dimensions, and Figure 2-6 shows the USB cable dimensions. Figure 2-4 SpiderDuo Syste m Configuratio n Figure 2-5 shows the PS/2 cable dimensions.
2: Overview Spider™ and SpiderDuo® KVM -ov er-IP Device User Guide 22 Figure 2-6 shows the USB cable dimension . Figure 2-6 SpiderDuo USB Cable Dimensions Note: The PS/2 cables and USB cables cannot be mixed and matched with each other due to the unique properties of each.
2: Overview Spider™ and SpiderDuo® KVM -ov er-IP Device User Guide 23 Product Information Label The Product Information La bel on the back of the Spider family units contains the following informat.
2: Overview Spider™ and SpiderDuo® KVM -ov er-IP Device User Guide 24 Figure 2-8 Spider Famil y Product Information Label.
Spider™ and SpiderDuo® KVM -ov er-IP Device User Guide 25 3: Installing the Spider Device This chapter descr ibes how to install the Lan tronix Spider KVM-ove r-IP device.
3: Installing th e Spider Device Spider™ and SpiderDuo® KVM -ov er-IP Device User Guide 26 Ethernet Ports—Connects to the LAN. The Spid er device contains a hard ware Ethernet switch that connects to the external po rts and an intern al CPU. The f irst port is re quired for n etwork connection.
3: Installing th e Spider Device Spider™ and SpiderDuo® KVM -ov er-IP Device User Guide 27 4. The Pwr2 LED illuminates blue and the SysOK LE D flashes green to indi cate that the Spider device is booting. Bootup should co mplete wit hin one minute.
3: Installing th e Spider Device Spider™ and SpiderDuo® KVM -ov er-IP Device User Guide 28 Figure 3-5 Spider RJ45 Ethernet and Cascade Ports Detector Inst allation and IP Address Reset The initial IP addr ess gets assigned during boot up of the Spider device.
3: Installing th e Spider Device Spider™ and SpiderDuo® KVM -ov er-IP Device User Guide 29 5. Before searching for devices, go to the Timeout dr op-down menu in the toolbar. Cha nge the milliseconds for the search by clicking th e number in the Timeout drop=down menu.
3: Installing th e Spider Device Spider™ and SpiderDuo® KVM -ov er-IP Device User Guide 30 Figure 3-8 Network Settin gs Window 8. Enter an unique and v alid IP Addr ess on your network an d in the sam e subnet as your PC. There is no default. 9. Enter the subnet mask that is the network segm ent connected to the Spid er device.
3: Installing th e Spider Device Spider™ and SpiderDuo® KVM -ov er-IP Device User Guide 31 Video Resolutions and Refresh Rates Configuration The Spider d evice recogn izes video resolutions on the target computer up to a maximum of 1600 x 1200 at 60 Hz if its hardware revision G22, G23, E21 or higher .
3: Installing th e Spider Device Spider™ and SpiderDuo® KVM -ov er-IP Device User Guide 32 Perform the following steps to configure the mouse-to-cursor synchroniza tion. Windows Server 1. Select Control Panel > Mouse > Pointer Options . 2.
3: Installing th e Spider Device Spider™ and SpiderDuo® KVM -ov er-IP Device User Guide 33 Spanning Tre e protocol implemented in the switch disables one of the two network connections while the loop remains complete. Data flows in one direction only around th e loop.
Spider™ and SpiderDuo® KVM -ov er-IP Device User Guide 34 4: Installing the SpiderDuo Device This chapter descr ibes how to in stall the Lantronix SpiderDuo dev ice.
4: Installing the SpiderDuo Device Spider™ and SpiderDuo® KVM -ov er-IP Device User Guide 35 cases, the PS/2-interface mode l may be require d . You configure either interface type by using the software. Serial Ports —Performs the initial configur ation to setup parameters and connects to a target COM port.
4: Installing the SpiderDuo Device Spider™ and SpiderDuo® KVM -ov er-IP Device User Guide 36 Figure 4-2 SpiderDuo Local KVM, US B, Com puter Input and Serial Ports 5. Upon bootup, the terminal window displays the IP Configuratio n screen. At the command prompt type conf ig and press Enter .
4: Installing the SpiderDuo Device Spider™ and SpiderDuo® KVM -ov er-IP Device User Guide 37 Note: To reboot or reset the SpiderDuo, press the reset switch through the pinhole on the bottom of the device. You can also use the user interface or serial port.
4: Installing the SpiderDuo Device Spider™ and SpiderDuo® KVM -ov er-IP Device User Guide 38 Figure 4-6 Lantronix Dete ctor Window 5. Before searching for devices, go to the Timeout dr op-down menu in the toolbar. Cha nge the milliseconds for the search by clicking th e number in the Timeout drop-down menu.
4: Installing the SpiderDuo Device Spider™ and SpiderDuo® KVM -ov er-IP Device User Guide 39 Figure 4-8 Network Settin gs Window 8. Enter an unique and v alid IP Addr ess on your network an d in the sam e subnet as your PC. There is no default. 9. Enter the subnet mask that is the network segm ent connected to the Spid er device.
4: Installing the SpiderDuo Device Spider™ and SpiderDuo® KVM -ov er-IP Device User Guide 40 Video Resolutions and Refresh Rates Configuration The SpiderDuo devices recognize video re solution s on the target computer up to a ma ximum of 1600 x 1200 at 60 Hz.
4: Installing the SpiderDuo Device Spider™ and SpiderDuo® KVM -ov er-IP Device User Guide 41 2. Set the pointe r speed to medium an d disable Enhanced pointer precision . Linux Server 1. Set Mouse Acceleration to exactly 1 and thre shold to exactly 1.
4: Installing the SpiderDuo Device Spider™ and SpiderDuo® KVM -ov er-IP Device User Guide 42 Platform-independe nt management—Each Spider de vice contains an embedded we b server that delivers web pages, a Java KVM Remote Console program, and a termin al program.
4: Installing the SpiderDuo Device Spider™ and SpiderDuo® KVM -ov er-IP Device User Guide 43 PCU Power To remotely contr ol power to a PC and othe r equipment, an optional PCU is availab le (part number PCU100-01). The PCU manages power remo tely to a target PC and other equipm ent.
4: Installing the SpiderDuo Device Spider™ and SpiderDuo® KVM -ov er-IP Device User Guide 44 Warning: AC power passes throu gh by default if the RJ45 ca ble is disconnected from the PCU. The SpiderDuo device gets its powe r from an external DC supply.
Spider™ and SpiderDuo® KVM -ov er-IP Device User Guide 45 5: W eb Browser Access This chapter descr ibes how to use the La ntronix Spider an d SpiderDuo KVM-ov er-IP device to access and manage a target computer by using a Web br owser or remote system.
Spider™ and SpiderDuo® KVM -ov er-IP Device User Guide 46 6: Remote System Control This chapter descr ibes the compo nents of remo te system control.
6: Remote Syst em Control Spider™ and SpiderDuo® KVM -ov er-IP Device User Guide 47 Figure 6-1 Remote Cons ole Window Comp onents Main Viewport and Scroll Bars When first la unched, the full virtual sc reen of th e target computer is mapped pixel-for -pixel to the console window main viewport.
6: Remote Syst em Control Spider™ and SpiderDuo® KVM -ov er-IP Device User Guide 48 Screen Display Adjustments —These 3 buttons (A,S,R) fac ilitate changes to the Screen display Sync Mouse, Single/Double Curs or —These icons appe ar when the PS/2 mouse interfac e is active.
6: Remote Syst em Control Spider™ and SpiderDuo® KVM -ov er-IP Device User Guide 49 Basic Remote Console Operation When the Remote Console wind ow is open, there are three ke y zones: Outside the Remote Console win dow, interaction is with the loca l computer’s op erating syste m or applications.
6: Remote Syst em Control Spider™ and SpiderDuo® KVM -ov er-IP Device User Guide 50 Auto Video Adjustment The left side of the target computer scre en must be align ed with the left side o f the Remote Console viewport so that the tops align as well.
6: Remote Syst em Control Spider™ and SpiderDuo® KVM -ov er-IP Device User Guide 51 The other selections p rovide a change o f appearance for a visual clue that the focus is on the remote compu.
6: Remote Syst em Control Spider™ and SpiderDuo® KVM -ov er-IP Device User Guide 52 Settings > KVM_User > Tr ansmission Encoding web pag e. To change the settings during a session, select Options > Encoding > Predefined , Encoding > Compression , Encoding > Color Depth , and Encoding > Lossy manual adjustme nts.
6: Remote Syst em Control Spider™ and SpiderDuo® KVM -ov er-IP Device User Guide 53 that Button Key has been defined with “Confirm”, a confirma tion dialog box pops up before the keycode is sent. Other Remote Console Functions Other remote console functions are d escribed in this section.
6: Remote Syst em Control Spider™ and SpiderDuo® KVM -ov er-IP Device User Guide 54 port numbers also may be changed from their defa ults . A user attempting to connect via Telnet or SSH must also have the appropriate perm issions.
6: Remote Syst em Control Spider™ and SpiderDuo® KVM -ov er-IP Device User Guide 55 Figure 6-4 Login Scre en.
Spider™ and SpiderDuo® KVM -ov er-IP Device User Guide 56 7: Interfaces This chapter descr ibes the Interf aces tab including information about the pages for configuring network, ser ial port, KVM Conso l e, Keyboard/Mouse, Video, and Virt ual Media settings.
7: Interfaces Spider™ and SpiderDuo® KVM -ov er-IP Device User Guide 57 Figure 7-1 Spider Netw ork Settings W eb Page 2. Modify the following fields. Network Basic Settings Field Description IP auto configuration Select DHCP or BOOTP to fetch network settings from the appropriate type of server.
7: Interfaces Spider™ and SpiderDuo® KVM -ov er-IP Device User Guide 58 Lan Interface Settings IPv6 Settings (Firmware v3.0 or higher) Miscellaneous Network Settings Secondary DNS Ser ver IP Address (option al) Enter the IP address of the Domain Name Server to be used if the Primary DNS Server cannot be reached.
7: Interfaces Spider™ and SpiderDuo® KVM -ov er-IP Device User Guide 59 3. Do one of the following: a. Click Save to save setting s. b. Click Reset to Defaults to restore system defaults.
7: Interfaces Spider™ and SpiderDuo® KVM -ov er-IP Device User Guide 60 Serial Port Settings After using the serial port to set up the netw ork parameters, you can use the ser ial port for something else.
7: Interfaces Spider™ and SpiderDuo® KVM -ov er-IP Device User Guide 61 3. Do one of the following: a. Click Save to save setting s. b. Click Reset to Defaults to restore system defaults.
7: Interfaces Spider™ and SpiderDuo® KVM -ov er-IP Device User Guide 62 The way in which the Spider device transmits video da ta back to the client system can be tailore d for the type of network co nnection. On a LAN wher e bandwidth is not an issue, compression is not required and the spee d of updates can be maximi zed.
7: Interfaces Spider™ and SpiderDuo® KVM -ov er-IP Device User Guide 63 Transmission Encoding KVM Console Type Note: Users have two ways to deploy the Remo te Console program. Both provide the same functionality and differ only in deployment method.
7: Interfaces Spider™ and SpiderDuo® KVM -ov er-IP Device User Guide 64 Mouse Hotkey KVM Console Virtual Keys 3. Do one of the following: a. Click Save to save setting s. b. Click Reset to Defaults to restore system defaults. c. Click Reset to restore original settings.
7: Interfaces Spider™ and SpiderDuo® KVM -ov er-IP Device User Guide 65 Keyboard/Mouse To modify the keyboard and mo use se ttings, perform the following steps. 1. Click Interfaces > Keyboard/Mouse . The Keyboard/Mouse Settings page displa ys. Figure 7-4 Ke yboard/Mouse Settings 2.
7: Interfaces Spider™ and SpiderDuo® KVM -ov er-IP Device User Guide 66 Keyboard/Mouse Settings Keyboard Model Key Release Timeout Country Code Field Description Host Interface In general, the USB interface is pref erred because it provide s superior mouse tracking.
7: Interfaces Spider™ and SpiderDuo® KVM -ov er-IP Device User Guide 67 USB Mouse Type Mouse Speed 3. View the USB Status for USB Speed, Keyboard, Mouse, and Mass Storage. 4. Do one of the following: a. Click Save to save setting s. b. Click Reset to Defaults to restore system defaults.
7: Interfaces Spider™ and SpiderDuo® KVM -ov er-IP Device User Guide 68 Figure 7-5 Keyboard/M ouse Settings Page B Vi d e o The Spider device works by captur ing and digiti zing the analo g video coming from the attached computer.
7: Interfaces Spider™ and SpiderDuo® KVM -ov er-IP Device User Guide 69 Figure 7-6 Miscel laneous Video Settin gs Page 2. Select the Noise Filter level from the drop-down menu. 3. Do one of the following: a. Click Save to save setting s. b. Click Reset to Defaults to restore system defaults.
7: Interfaces Spider™ and SpiderDuo® KVM -ov er-IP Device User Guide 70 Figure 7-7 Virtual Media Page To prepare for drive redirection, pe rform the following steps.
7: Interfaces Spider™ and SpiderDuo® KVM -ov er-IP Device User Guide 71 Virtual Media Options The operating system on the ta rget computer mu st have a USB mass storage driver installed in order to use Virtual Media.
7: Interfaces Spider™ and SpiderDuo® KVM -ov er-IP Device User Guide 72 b. To moun t the image, click Set . Information about the image displays in the Virtual Media Active Image section of the page and the CD ic on displays on the remote console. Figure 7-8 Virtual Media Acti ve Page 3.
7: Interfaces Spider™ and SpiderDuo® KVM -ov er-IP Device User Guide 73 b. Click Upload to load the image into Spider device’s memory. This floppy drive is accessible to the remote computer as a letter-name flopp y drive (e.g., B : ). Information about the image dis plays in the Virtual Media Active Image section of the pag e.
7: Interfaces Spider™ and SpiderDuo® KVM -ov er-IP Device User Guide 74 Figure 7-10 Drive R edirection Win dow Figure 7-11 Drive Redirect Buttons 3. Click the Connect Drive button at the top of the page. The S elect a drive to redirect dialog box opens.
7: Interfaces Spider™ and SpiderDuo® KVM -ov er-IP Device User Guide 75 Figure 7-14 Local Drive Browser Windo w 8. Select the ISO image file to use as a local disk and press Open . Figure 7-15 Drive Redirection Esta blished Wind ow 9. ISO Drive Re direction es tablished displays at top of scre en.
Spider™ and SpiderDuo® KVM -ov er-IP Device User Guide 76 8: User Accounts This chapter descr ibes user accou nts including local and re mote authentica tion, manage ment, and user groups and ho w to configure each . It contains the following sections: Local vs.
8: User Accou nts Spider™ and SpiderDuo® KVM -ov er-IP Device User Guide 77 Figure 8-1 Change Password Page 2. Enter the current p assword under Old Passwor d . 3. Enter the new passwor d under New Password and Confirm New Pass word . 4. Click Save t o save your settings, or click Reset to restore original settings.
8: User Accou nts Spider™ and SpiderDuo® KVM -ov er-IP Device User Guide 78 Figure 8-2 Configure User Page User Management To configure a use r, perform the following steps. 1. Configure the following fields. 2. Do one of the following: a. Click Create to add the new user.
8: User Accou nts Spider™ and SpiderDuo® KVM -ov er-IP Device User Guide 79 Group Management To configure a user group, perform the followin g steps. 1. Configure the following fields. 2. Do one of the following: a. Click Create to add the new group.
8: User Accou nts Spider™ and SpiderDuo® KVM -ov er-IP Device User Guide 80 4. If you created a user who does not belong to any group , then select User . 5. From th e Direct KVM drop-do wn menu, do one of the following : a. Select Yes to enable the user or group to access the Remote Console only.
8: User Accou nts Spider™ and SpiderDuo® KVM -ov er-IP Device User Guide 81 Figure 8-4 Authentication Page 2. Modify the following field. LDAP When you select LDAP Authenticati on, the Spider device will commun icate with a Microsoft Ac tive Directory or generic LDAP serv er for user authenti cation.
8: User Accou nts Spider™ and SpiderDuo® KVM -ov er-IP Device User Guide 82 RADIUS When RADIUS is selected, the Sp ider device communicat es with a R ADIUS serv er for user authentication. To access a Spid er device set up for RADIUS, log in with a name and password.
Spider™ and SpiderDuo® KVM -ov er-IP Device User Guide 83 9: Services This chapter describes the Spider and SpiderDuo KVP-over-IP services. It cont ains the following sections: Date/Time Se.
9: Services Spider™ and SpiderDuo® KVM -ov er-IP Device User Guide 84 2. Modify the following fields. 3. Do one of the following: a. Click Save to save setting s. b. Click Reset to Defaults to restore system defaults. c. Click Reset to restore original settings.
9: Services Spider™ and SpiderDuo® KVM -ov er-IP Device User Guide 85 Figure 9-3 Security Settings Page 2. Modify the following fields. HTTP Encryption Login Limitations KVM Encryption Field Description Force HTTPS for Web Access Typically, the Spider device listens on bo th HTTP and HTTPS ports for incoming connections.
9: Services Spider™ and SpiderDuo® KVM -ov er-IP Device User Guide 86 Group Based Syst em Access Control Authentication Limitation 3. Do one of the following: a. Click Save to save setting s. b. Click Reset to Defaults to restore system defaults. c.
9: Services Spider™ and SpiderDuo® KVM -ov er-IP Device User Guide 87 Certificate The Spider de vice uses the Se cure Socket Laye r (SSL) protocol for any encrypted network traffic between itself and a connected client.
9: Services Spider™ and SpiderDuo® KVM -ov er-IP Device User Guide 88 3. Click Create to initiate the Certific ate Signing Request generatio n. Download the CSR by clicking Download . The Download button displays when a certificate is created. Send the saved CSR to a CA for certification.
9: Services Spider™ and SpiderDuo® KVM -ov er-IP Device User Guide 89 Event Log The Event Log maintains a list of si gnificant events locally. Alternativ ely it can use an NFS log file, SMTP email, or SNMP to distribute event information on the network.
9: Services Spider™ and SpiderDuo® KVM -ov er-IP Device User Guide 90 Event Log Assignments 3. Do one of the following: a. Click Save to save setting s. b. Click Reset to Defaults to restore system defaults. c. Click Reset to restore original settings.
9: Services Spider™ and SpiderDuo® KVM -ov er-IP Device User Guide 91 Figure 9-6 SNMP Settings Page 2. Modify the following fields. 3. Do one of the following: a. Click Save to save setting s. b. Click Reset to Defaults to restore system defaults. c.
9: Services Spider™ and SpiderDuo® KVM -ov er-IP Device User Guide 92 KVM Search The KVM Sea rch option enables you to view the properties of other Spider de vices on the network.
9: Services Spider™ and SpiderDuo® KVM -ov er-IP Device User Guide 93 Figure 9-7 KVM Search Page Power Management The Power Management op tion enables you to manage the prop erties of the power system.
9: Services Spider™ and SpiderDuo® KVM -ov er-IP Device User Guide 94 Figure 9-8 Power Managemen t Page The Power Managemen t web page contai ns two sections as displayed in Figure 9-8 . The upp er portion displays information ab out the SpiderDuo PCU.
9: Services Spider™ and SpiderDuo® KVM -ov er-IP Device User Guide 95 If the second radio b utton is selected, the WOL me ssage may be sent to any number of devices identified by a Device Name, IP Address (optional) , or MAC address (entered into th e respective text boxes).
Spider™ and SpiderDuo® KVM -ov er-IP Device User Guide 96 10: Maintenance This chapter describes var ious maintenance activiti es of an administr ator. These include viewing status, backing up and restoring co nfiguration file s, updatin g firmware, viewing the event log, and resetting the unit.
10: Maintenance Spider™ and SpiderDuo® KVM -ov er-IP Device User Guide 97 2. View or modify the following fields. 3. Do one of the following: a. Click Save to save setting s. b. Click Reset to Defaults to restore system defaults. c. Click Reset to restore original settings.
10: Maintenance Spider™ and SpiderDuo® KVM -ov er-IP Device User Guide 98 Figure 10-3 Configura tion Page 2. Edit the following fields. Field Description Configuration Ba ckup To back up all settings to a file on the client system, click the Backup and save to your compu ter radio button.
10: Maintenance Spider™ and SpiderDuo® KVM -ov er-IP Device User Guide 99 Up date Firmware Many of the functions and fea tures of the Spider device a re implemented in firmware an d capable of field upgrades. The latest fi rmware may be found at www.
10: Maintenance Spider™ and SpiderDuo® KVM -ov er-IP Device User Guide 100 Figure 10-5 Event Log Page 2. Navigate between logs by clicking Prev and Next . Unit Reset In general, the Spider device requires a reset w hen implementing a firmware up date.
10: Maintenance Spider™ and SpiderDuo® KVM -ov er-IP Device User Guide 101 Figure 10-6 Unit Res et Page 3. Click the Reset button for Reset Keyboard/Mouse (PS/2) , Reset USB , or Reset Video Engine to clear and reset the subsystem. Rese tting subsystems does not terminate connected us ers.
10: Maintenance Spider™ and SpiderDuo® KVM -ov er-IP Device User Guide 102 3. Edit a file s imilar to th e example below and sa ve it with ext ension "xml ." This exam ple assumes the file is saved as spider1.xml. The sample code di splays a snapshot and re freshes the image every minute.
10: Maintenance Spider™ and SpiderDuo® KVM -ov er-IP Device User Guide 103 Figure 10-7 iGoogle Gadget Page.
Spider™ and SpiderDuo® KVM -ov er-IP Device User Guide 104 1 1: Command Reference This chapter lists and describes the command lin e interface (CLI) syntax and contains the following sections: .
11: Command Reference Spider™ and SpiderDuo® KVM -ov er-IP Device User Guide 105 Command Help For general command help , type: help For more informa tion about a specific command, type help followe.
11: Command Reference Spider™ and SpiderDuo® KVM -ov er-IP Device User Guide 106 Parameters <Config Params to Preserve> is a comma separa te d list of current configuration parameter s to retain afte r the config restore or fa ctoryd efaults: nt - Network Basic vp.
11: Command Reference Spider™ and SpiderDuo® KVM -ov er-IP Device User Guide 107 Connect Commands connect serial Syntax connect serial Description Connects the Spider device to a device serial port. Note: To connect to a seria l port, put the serial port in passthrough mod e on the web interface.
11: Command Reference Spider™ and SpiderDuo® KVM -ov er-IP Device User Guide 108 show sshkey import Syntax show sshkey import <one or more parameters> Parameters [keyuser <SSH Key User>] [keyhost <SSH Key IP Address or Name>] [viewkey <enable|disable>] Description Displays imported SSH keys.
11: Command Reference Spider™ and SpiderDuo® KVM -ov er-IP Device User Guide 109 Parameters dns1 <IP Address> dns2 <IP Address> gateway <IP Address> hostname <Host Name> ipa.
11: Command Reference Spider™ and SpiderDuo® KVM -ov er-IP Device User Guide 110 show network basic Syntax show network basic Description Displays basic network parameters. show network misc Syntax show network misc Description Displays network misce llaneou s parameter s.
11: Command Reference Spider™ and SpiderDuo® KVM -ov er-IP Device User Guide 111 Parameters date <MMDDYYhhmm[ss]> utcoffset <offset string> Notes: MMDDYYhhmm[ss] can be: - MM is 1-1.
11: Command Reference Spider™ and SpiderDuo® KVM -ov er-IP Device User Guide 112 Description Sets user login, email address, group, and mob ile phone number. set user delete Syntax set user delete <User Login> Description Deletes a us er login.
11: Command Reference Spider™ and SpiderDuo® KVM -ov er-IP Device User Guide 113 set group delete Syntax set group delete <Group Name> Description Deletes user grou ps. show group name Syntax show group [name <Group Name>] Description Displays grou p names.
11: Command Reference Spider™ and SpiderDuo® KVM -ov er-IP Device User Guide 114 Description Displays security parameters. Sysconfig Commands show sysconfig Syntax show sysconfig Description Displa.
11: Command Reference Spider™ and SpiderDuo® KVM -ov er-IP Device User Guide 115 Description Displays all devices. show device name Syntax show device name Description Displays device names.
11: Command Reference Spider™ and SpiderDuo® KVM -ov er-IP Device User Guide 116 Parameters [state <o n/off>] Description Sets PCU parameters.
11: Command Reference Spider™ and SpiderDuo® KVM -ov er-IP Device User Guide 117 Description Sends a WOL packet to a specified devi ce. connect wakeonlan macaddr Syntax connect wakeonlan macaddr [M.
11: Command Reference Spider™ and SpiderDuo® KVM -ov er-IP Device User Guide 118 Description Dumps the first 256 line s or 1M byt es of the sp ecified file co ntent of a USB thumb dr ive. Reboot Commands admin reboot Syntax admin reboot Description Immediately terminate s all connections and reboots the device .
11: Command Reference Spider™ and SpiderDuo® KVM -ov er-IP Device User Guide 119 kt: KVM Settings(Type/Deploym ent) ks: Keyboard/Mouse Settings ld: LDAP Settings ns: Networ k Settin.
Spider™ and SpiderDuo® KVM -ov er-IP Device User Guide 120 Appendix A: T roubleshooting No connection can be establis hed to the Spider device. Check cabling.
Appendix A: Troubleshooting Spider™ and SpiderDuo® KVM -ov er-IP Device User Guide 121 I forgot my password. How can I reset the Spider device to factory def aults? Use the serial interface with a terminal emulato r program set to 9600 or 115200 , 8 bit characters, No parity, 1 Sto p bit, and No flow contro l.
Spider™ and SpiderDuo® KVM -ov er-IP Device User Guide 122 Appendix B: V irtual Media Example Goal In this exam ple, the go al is to put a rescue CD ( a CD used to boot a PC when the hard-disk corruption prev ents OS boot) on PC#3 so that the re scue CD can be used by any Spid er devices on the network.
Appendix B: Virtual Media Exampl e Spider™ and SpiderDuo® KVM -ov er-IP Device User Guide 123 Figure B-2 Window s Browser 3. Right-click the folder aaa and select the “sharing” menu. The defa ult name is the folder name but changed to share_some_folder as shown in the diagram below.
Appendix B: Virtual Media Exampl e Spider™ and SpiderDuo® KVM -ov er-IP Device User Guide 124 2. Go to the Virtual Media page and co mplete the fields in the Ima ge on Windows Share section of the page as shown in the diagram belo w. Figure B-4 Virtual Medi a Page 3.
Appendix B: Virtual Media Exampl e Spider™ and SpiderDuo® KVM -ov er-IP Device User Guide 125 Figure B-5 Virtual Media Active Image S tep 3 – Use the Virtual Media 1.
Appendix B: Virtual Media Exampl e Spider™ and SpiderDuo® KVM -ov er-IP Device User Guide 126 Figure B-7 Linux PC Wind ow and USB CD 3. You should be able to boo t from the external USB device (bo ot.iso) on PC#2. Make sure that you set BIOS to boot from the USB device.
Spider™ and SpiderDuo® KVM -ov er-IP Device User Guide 127 Appendix C: Supported Resolutions and Refresh Rates The table below lists the supported resolution and refresh rates for video.
Spider™ and SpiderDuo® KVM -ov er-IP Device User Guide 128 Appendix D: Mounting Bracket Kit A versatile mounting bra cket and screws are supplied to assist in easily installing and mounting a single Spider or SpiderDu o device into a server rack in various orientations (e.
Appendix D: Mounting Bracket Kit Spider™ and SpiderDuo® KVM -ov er-IP Device User Guide 129 Figure D-3 Atta ching the De vice to the Mou nting Bracket 3.
Spider™ and SpiderDuo® KVM -ov er-IP Device User Guide 130 Appendix E: PCU Safety Information Please follow the safety prec autions described below when in stalling and oper ating the PCU. Cover Do not remove the co ver of the PCU. There ar e n o user-serviceable parts inside.
Spider™ and SpiderDuo® KVM -ov er-IP Device User Guide 131 Appendix F: T echnical Support If you are unable to r esolve an iss ue using the informatio n in this d ocumentatio n, contact the followi ng resour ces. Technical Support US C heck our online knowledg e base or send a question to Technical Suppor t at http://www.
Spider™ and SpiderDuo® KVM -ov er-IP Device User Guide 132 Appendix G: Compliance The following meet the ISO/IEC Guide 17050 -1, 17050-2 and EN 45014 com pliances.
Appendix G: Compliance Spider™ and SpiderDuo® KVM -ov er-IP Device User Guide 133 RoHS Notice All Lantronix products in the following famili es are Chin a RoHS-compliant a nd free of the following .
Un punto importante, dopo l’acquisto del dispositivo (o anche prima di acquisto) è quello di leggere il manuale. Dobbiamo farlo per diversi motivi semplici:
Se non hai ancora comprato il Lantronix SLSLP400PS201 è un buon momento per familiarizzare con i dati di base del prodotto. Prime consultare le pagine iniziali del manuale d’uso, che si trova al di sopra. Dovresti trovare lì i dati tecnici più importanti del Lantronix SLSLP400PS201 - in questo modo è possibile verificare se l’apparecchio soddisfa le tue esigenze. Esplorando le pagine segenti del manuali d’uso Lantronix SLSLP400PS201 imparerai tutte le caratteristiche del prodotto e le informazioni sul suo funzionamento. Le informazioni sul Lantronix SLSLP400PS201 ti aiuteranno sicuramente a prendere una decisione relativa all’acquisto.
In una situazione in cui hai già il Lantronix SLSLP400PS201, ma non hai ancora letto il manuale d’uso, dovresti farlo per le ragioni sopra descritte. Saprai quindi se hai correttamente usato le funzioni disponibili, e se hai commesso errori che possono ridurre la durata di vita del Lantronix SLSLP400PS201.
Tuttavia, uno dei ruoli più importanti per l’utente svolti dal manuale d’uso è quello di aiutare a risolvere i problemi con il Lantronix SLSLP400PS201. Quasi sempre, ci troverai Troubleshooting, cioè i guasti più frequenti e malfunzionamenti del dispositivo Lantronix SLSLP400PS201 insieme con le istruzioni su come risolverli. Anche se non si riesci a risolvere il problema, il manuale d’uso ti mostrerà il percorso di ulteriori procedimenti – il contatto con il centro servizio clienti o il servizio più vicino.
