Manuale d’uso / di manutenzione del prodotto WT-5721 del fabbricante La Crosse Technology
Vai alla pagina of 16
WT-5721 433 MHz Radio Controlled Projection Alarm Instruction Manual P R OJE CT I ON 0 2' ( .
2 TABL E OF CONTENT S Topic Page Inventory of Contents/ Additional Equipment 3 About WWVB 3 Quick Set-Up Guide 4 Detailed Set-Up Guide Battery Installation 5 Program Mode Programming Sequence 6 Functi.
3 INVENTORY OF CONTENTS 1) WT-5721 Alarm Clock 2) TX6U Remote temperature sensor 3) AC adapter/transformer 4) Instruction manual and warranty card. ADDITION AL EQUIPMENT (not included) 1) Two fresh 1.5V AA batteries (optional for alarm clock) 2) Two fresh 1.
4 QUICK SET-UP GUIDE Hint: Use good quality Alkaline Batteri es and avoid rec hargeable batteries. 1. Have the indoor station and outdoor remote 3 to 5 ap art. 2. Batteries shoul d be out of both units for 1 0 m inutes. 3. Place the batteries into the outdoor remote first then into the indoor station.
5 B attery Cover DETAILED SET-UP GUIDE II. BATTERY INSTALLATIO N A. REMOTE TEMPERATURE SENSOR 1. Remove the battery cover. Observing the correct polarity, install 2 AA batteries. The batteries will fit tightly (to avoid start-up problems make sure that they do not spring free during installation).
6 III. PROG RAM MODE To enter the Program Mode hold down the “SET ” button for 1 second, until the time zone (“-5” default) flashes in the lower left. The Program Mode Guide is laid out in a manner t hat allows you to program each function separ ately, or you can follow the instructions entirely to program the projection alarm.
7 D. DST (DAYLIGHT S AVING TIME) SETTING Note: The DST default is “On ”, meaning that the WWVB will automatically change the time according to Daylight Saving Time in the spring and fall. For areas that do not recogni ze DST changes (Arizona and parts of Indiana) turn th e DST “OFF”.
8 9. Press and release the “ SET” button to confirm the calendar settings, and to advance to select either 12 or 24-hour time display. H. 12/24-HOUR SETTIN G Note: Setting to the 24 hour mode (also known as Military Time) will also change the temperature to display in ° C instead of ° F.
9 IV. FEATURES & OPERATIONS A. FEATURES 1. Radio-controlled time and date 2. Projection of time and/or remote temperature 3. EL backlight 4. Six modes of date/seconds/temperature display 5. Indoor temperature 6. Remote outdoor temperature 7. Dual alarms 8.
10 6. The projector case can be rotated 180 ° to furthe r help orient the projected display. 7. The intensity of the projection can be adjusted to three different settings as well as turned “off” by pressing the light Intensity button. When turned off, the projection will only come on when a button is pressed.
11 G. TIME ALARM The projection alarm has two se parate alarms for time, “ALM1 ” and “ALM2”. The alarms have a different sound; ALM1 increases in volume after 25 seconds, and again after 50 seconds. ALM2 is a constant volume. The total duration is 96 seconds for each alarm.
12 V. MOUNTING THE REMOTE TEM PERATURE SENSOR A. The Remote Temperature Sensor can be mounte d in two ways: 1) with the use of screws, or 2) using the adhesive tape. B. MOUNTING WITH SCREWS 1. Remove the mounting bracket from the Remote Temperatu re Sensor.
13 TROUBLESHOOTING Problem: The Projection is faint Solution: 1) Change intensity setting 2) Use AC adapter 3) Darken surroundings 4) Use fresh batteries (if AC is not used) Problem: The LCD is faint. Solution: 1) Replace the batteries. Problem: “OFL” appears in the indoor temp erature LCD.
14 SPECIFICATIONS FOR WT-5721 Temperature: Measuring range: 32 ° F to 122 ° F with 0.2 ° F resolution (indoor) -21.8 ° F to 140 ° F with 0.2 ° F resolution (outdoor) (0 ° C to 50 ° C with 0.1 ° C resolution) Checking intervals: Every 10 second s indoor, 3 times in 10 minutes for remote temperature.
15 W AR R AN T Y I N F O R M AT I ON La Crosse Technology, Ltd provides a 1-year limited warranty on this product against manufacturing defects in materials and workmanship.
16 For warranty work, technical support, or information contact: La Crosse Technology 2809 Losey Blvd. S. La Crosse, WI 54601 Phone: 608.782.1610 Fax: 608.796.1020 e-mail: support@lacrossetechnology.com (warranty work) sales@lacrossetechnology.com (information on other products) web: www.
Un punto importante, dopo l’acquisto del dispositivo (o anche prima di acquisto) è quello di leggere il manuale. Dobbiamo farlo per diversi motivi semplici:
Se non hai ancora comprato il La Crosse Technology WT-5721 è un buon momento per familiarizzare con i dati di base del prodotto. Prime consultare le pagine iniziali del manuale d’uso, che si trova al di sopra. Dovresti trovare lì i dati tecnici più importanti del La Crosse Technology WT-5721 - in questo modo è possibile verificare se l’apparecchio soddisfa le tue esigenze. Esplorando le pagine segenti del manuali d’uso La Crosse Technology WT-5721 imparerai tutte le caratteristiche del prodotto e le informazioni sul suo funzionamento. Le informazioni sul La Crosse Technology WT-5721 ti aiuteranno sicuramente a prendere una decisione relativa all’acquisto.
In una situazione in cui hai già il La Crosse Technology WT-5721, ma non hai ancora letto il manuale d’uso, dovresti farlo per le ragioni sopra descritte. Saprai quindi se hai correttamente usato le funzioni disponibili, e se hai commesso errori che possono ridurre la durata di vita del La Crosse Technology WT-5721.
Tuttavia, uno dei ruoli più importanti per l’utente svolti dal manuale d’uso è quello di aiutare a risolvere i problemi con il La Crosse Technology WT-5721. Quasi sempre, ci troverai Troubleshooting, cioè i guasti più frequenti e malfunzionamenti del dispositivo La Crosse Technology WT-5721 insieme con le istruzioni su come risolverli. Anche se non si riesci a risolvere il problema, il manuale d’uso ti mostrerà il percorso di ulteriori procedimenti – il contatto con il centro servizio clienti o il servizio più vicino.
