Manuale d’uso / di manutenzione del prodotto 750 del fabbricante Konica Minolta
Vai alla pagina of 526
User’ s Guide [Copy Operations].
Introduction bizhub 750/600 x-1 Introduction Thank you for choosing this machine. This manual contains details on the operation of the various functions of the machine, precautions on its use, and basic troubleshooting procedures.
Introduction x-2 bizhub 750/600 Trademarks and Registered Trademarks KONICA MINOLTA, KONICA MINOLTA Logo, and The essentials of imaging are registered trademarks or tra demarks of KONICA MINOLTA HOLDINGS, INC. PageScope and bizhub are registered trademarks or trademarks of KONICA MINOLTA BUSINESS TECHNOLOGIES, INC.
Introduction bizhub 750/600 x-3 Contents Introduction Energy Star ® .......... .............. .............. .............. ........... .............. ........ x-1 What is an ENERGY STAR ® Product? .......... .............. .............. ......x-1 Trademarks and Registered Trademarks .
Introduction x-4 bizhub 750/600 Descriptions an d Symbols for Original and Paper ......... ..............x-25 “Width” and “Length” .............. .............. .............. .............. ........... x-25 Paper Orientation .......... ......
Introduction bizhub 750/600 x-5 Control Panel . .............. .............. .............. .............. .............. ........ 2-14 Basic Settings Screen (Basic Screen) ...... ................ .............. ...... 2-17 Icons That Appear in the Touch Panel .
Introduction x-6 bizhub 750/600 Scanning the Original in Separate Batches (“Separate Scan” Se tting) ................. .............. .............. ................3-11 Scanning a Multi-Page Original from the Original Glass .............. 3-13 3.
Introduction bizhub 750/600 x-7 3.11 Selecting Finishing Settings ................ ................. .............. ........... 3-53 Separating Copies by Sets (“Sort” Setting) ................... .............. 3-56 Separating Copies by Pages (“Group” Setting) .
Introduction x-8 bizhub 750/600 4.7 Specifying Control Panel Settings (Accessibility Mode) .............. 4-23 Displaying the Accessibility Setting Screen ............ ................. ..... 4-23 To set the “Key Repeat Start/Interval Time” function .
Introduction bizhub 750/600 x-9 7 Copy Paper/Original 7.1 Copy Paper ............. .............. .............. .............. .............. .............. ..... 7-2 Possible Paper Sizes .............. .............. .............. .............. ..
Introduction x-10 bizhub 750/600 8.3 Adding Cover Pages (“Co ver Mode” Function) .................... ........8-12 To copy using the “Cover Mode” function .. .............. ................. .. 8-13 8.4 Inserting Cover Pages (“Insert Sheet” Function) .
Introduction bizhub 750/600 x-11 Printing the Page Number (“Page #” function) ...... ................ ...... 8-83 To copy using the “Page #” function .................. ................. ........ 8-83 Printing the Distribution Number (“Set Numbering” function) .
Introduction x-12 bizhub 750/600 11 Managing Jobs (Job List) 11.1 Overview of the Job List Screen ................... .............. ................. ..11-2 Jobs ....... ............... .............. .............. .............. .............. ....
Introduction bizhub 750/600 x-13 12.5 Adjusting the Printer ........ .............. .............. .............. .............. .... 12-41 Adjusting the Starting Print Position at the Leading Edge Position ............ .............. .............. .
Introduction x-14 bizhub 750/600 13 Appendix 13.1 Entering Text .................... .............. .............. .............. .............. ........13-2 To type text ............. .............. .............. .............. .............. ......
Introduction bizhub 750/600 x-15 Available Features Automatically selecting the paper The most appropriate paper size can automatically be selected based on the size of the loaded original and the specified zoom ratio. For details, refer to “Automatically Selecting the Paper Size (“Auto Paper Se- lect” Setting)” on page 3-26.
Introduction x-16 bizhub 750/600 Specifying separate horizontal and vertical zoom ratios By specifying separate horizontal and vertical zoom ratios, copies of the orig- inal can be resized as desired. For details, refer to “Typing In Separate X and Y Zoom Ratios (Independent Zoom Settings)” on page 3-35.
Introduction bizhub 750/600 x-17 Sorting copies The sorting method for outputting copies can be selected. For details, refer to “Separating Copies b y Sets (“Sort” Setting)” on page 3-56, “Separating Copies by Pages (“Group” Setting)” on page 3-57.
Introduction x-18 bizhub 750/600 Center folding/bi nding Copies can be folded in half or bound with staples, then folded in half. For details, refer to “To fold copies at the center (“Half Fold”)” on page 3-67 and “To bind copies at the center (“ Fold & Stap le”)” on page 3-68.
Introduction bizhub 750/600 x-19 Inserting copies of a different original at a specified location An original page scanned from the original glass can be inserted between original pages scanne d with the automatic document feeder, and all copi es can be fed out together.
Introduction x-20 bizhub 750/600 Copying with reversed colors An original can be copied with the light- an d dark-colored areas of images in- versed. For details, refer to “Copying With Image Colors Inversed (“Neg-/Pos. Re- verse” Function)” on page 8-28.
Introduction bizhub 750/600 x-21 Splitting an original pa ge into two copi es A single original page can be divided in two and each half can be printed on separate copies. For details, refer to “Copying an Original on Two Pages (“Booklet Pagination” Function)” on page 8-51.
Introduction x-22 bizhub 750/600 Copying with a layout for center binding Copies can be made with the pages arranged in the layout of a magazine. For details, refer to “Copying Booklet Original (“Booklet” Function)” on page 8-66.
Introduction bizhub 750/600 x-23 Programming copy settings Frequently used copy settings can be programmed and r ecalled to be used with other copy jobs. For details, refer to “Registering Copy Programs (Mode Memory )” on page 4-10. Checking the copy settings Screens showing the current copy settings can be displayed.
Introduction x-24 bizhub 750/600 Explanation of Manual Conventions Titles indicate the contents of the section. T ouch panel screens are shown to check the actual displa y . (The page shown abov e is an example only .) T ext highlighted in this manner indicates precautions to ensure saf e use of this machine.
Introduction bizhub 750/600 x-25 Descriptions and Symbols for Original and Paper The use of words and symbols in this manual are explained below. “Width” and “Length” Whenever paper dimensions.
Introduction x-26 bizhub 750/600 Crosswise ( v ) If the width (Y) of the paper is longer than the length (X), the paper has a horizonta l or land- scape orientation, indicated by v .
Introduction bizhub 750/600 x-27 User’s Guides The following User’s Guides have been prep ared for this machine. User’s Guide [Copy Operations] <this manual> This manual contains details on basic operations and the operating proce- dures for the various copy functions.
Introduction x-28 bizhub 750/600 Legal Restrictions on Copying Certain types of original must never be copied with the purpose or intent to pass copies of such documents off as the originals. The following is not a complete list, but is meant to be used as a guide to responsible copying.
1 Installation and Operation Prec autions Chapter 1 Installation and Operation Precautions.
1 Installation and Operation Prec autions 1-2 bizhub 750/600 Installation and Operation Prec autions Chapter 1 1 Installation and Operation Precautions 1.1 Safety Information This section contains detaile d instructions on the operation and maint enance of this machine.
Installation and Operation Prec autions 1 bizhub 750/600 1-3 Installation and Operation Prec autions Chapter 1 Disassemble and modification WARNING • Do not attempt to remove the covers and pan- els which have been fixed to the product.
1 Installation and Operation Prec autions 1-4 bizhub 750/600 Installation and Operation Prec autions Chapter 1 Power source WARNING • Use only the specified power source voltage. Failure to do tha t could result in a fire or elect ri- cal shock. • Connect power plug directly into wa ll outlet having the same configuration as the plug.
Installation and Operation Prec autions 1 bizhub 750/600 1-5 Installation and Operation Prec autions Chapter 1 Power plug WARNING • Do not unplug and plug in the power cord with a wet hand, as an electrical shock cou ld result. • Plug the power cord all the way into the power outlet.
1 Installation and Operation Prec autions 1-6 bizhub 750/600 Installation and Operation Prec autions Chapter 1 Installation WARNING • Do not place a flower vase or other container that contains water, or metal clips or other small metallic objects on this product.
Installation and Operation Prec autions 1 bizhub 750/600 1-7 Installation and Operation Prec autions Chapter 1 Ventilation CAUTION • Always use this product in a well ventilated lo- cation. Operating the product in a poorly venti- lated room for an extended period of time could injure your health.
1 Installation and Operation Prec autions 1-8 bizhub 750/600 Installation and Operation Prec autions Chapter 1 Consumables WARNING • Do not throw the toner cartridge or toner into an open flame. The hot toner may scatter and cause burns or other damage.
Installation and Operation Prec autions 1 bizhub 750/600 1-9 Installation and Operation Prec autions Chapter 1 1.2 Regulation Notices CE Marking (Declaration of Conformity) for Users of the European Union (EU) This product complies with the following EU directives: 89/336/EEC, 73/23/EEC and 93/68/EEC directives.
1 Installation and Operation Prec autions 1-10 bizhub 750/600 Installation and Operation Prec autions Chapter 1 For Users in countries not subject to Class B regulations WARNING This is a Class A product. In a domestic environment this product may cause radio interference in which case the user may be req uired to take adequate measures.
Installation and Operation Prec autions 1 bizhub 750/600 1-11 Installation and Operation Prec autions Chapter 1 For Finland, Sweden Users LUOKAN 1 LASERLAITE KLASS 1 LASER APPARAT VAROITUS! Laitteen k.
1 Installation and Operation Prec autions 1-12 bizhub 750/600 Installation and Operation Prec autions Chapter 1 Ozone Release Locate the Machine in a Well-Ventilated Room A negligible amount of ozone is generated during normal op eration of this machine.
Installation and Operation Prec autions 1 bizhub 750/600 1-13 Installation and Operation Prec autions Chapter 1 1.3 Caution Notations and Labels Safety precaution notations and labels appear on th is machine at the follow- ing positions.
1 Installation and Operation Prec autions 1-14 bizhub 750/600 Installation and Operation Prec autions Chapter 1 1.4 Space Requirements To ensure that machine operation, consumable s replenishing, part re place- ment, and regular maintenance can easily be performed, adhere to the rec- ommended space requirements detailed below.
Installation and Operation Prec autions 1 bizhub 750/600 1-15 Installation and Operation Prec autions Chapter 1 2 Reminder Be sure to allow a clearance of 200 mm (7-3/4 in.
1 Installation and Operation Prec autions 1-16 bizhub 750/600 Installation and Operation Prec autions Chapter 1 1.5 Operation Precautions To ensure the optimum performance of this machine, observe the precau- tions described below. Power Source The power source requirements are as follows.
2 Before Making Copies Chapter 2 Before Making Copies.
2 Before Making Copies 2-2 bizhub 750/600 Before Making Copies Chapter 2 2 Before Making Copies 2.1 Part Names and Their Functions Outside of Machine 12 3 5 6 7 8 9 13 10 4 11 12 14.
Before Making Copies 2 bizhub 750/600 2-3 Before Making Copies Chapter 2 2 Note The maximum angle that the ADF is opened can be adjusted in two stag- es. For details, contact your technical represen tative. No. Part Name Descri ption 1 ADF (automatic docume nt feeder) Automatically feeds one original sheet at a tim e for scanning.
2 Before Making Copies 2-4 bizhub 750/600 Before Making Copies Chapter 2 15 16 17 No. Part Name Description 15 Power cord Supplies power to the machine 16 Serial port (RS-232 C) Used for transmissions.
Before Making Copies 2 bizhub 750/600 2-5 Before Making Copies Chapter 2 Inside of Machine 2 Reminder Parts in the fusing unit are extremely hot. Touching any part in this unit may result in burns. 1 2 3 4 5 6 7 8 No. Part Name Descri ption 1 Toner cart ridge When the toner is empty, replace the cartridge.
2 Before Making Copies 2-6 bizhub 750/600 Before Making Copies Chapter 2 Options 1 2 3 4 5 6 7 8 9 11 10 12 13.
Before Making Copies 2 bizhub 750/600 2-7 Before Making Copies Chapter 2 No. Part Name Descri ption 1 Main body The original is scanne d by the scanner section , and the scanned image is printed by the printer section. Referred to as the “machine ” or “main body” throughout the manu al.
2 Before Making Copies 2-8 bizhub 750/600 Before Making Copies Chapter 2 Large Capacity Tray LU-401/LU-402 11 22 3 3 4 4 6 6 7 7 5 5 LCT LU-401 LCT LU-402 No.
Before Making Copies 2 bizhub 750/600 2-9 Before Making Copies Chapter 2 Finisher FS-504/FS-602 (+ Punch Kit PK-505) 1 4 3 1 4 3 2 Finisher FS-504 Finisher FS-602 No.
2 Before Making Copies 2-10 bizhub 750/600 Before Making Copies Chapter 2 4 3 4 3 1 1 5 9 2 5 8 7 6 2 10 10 11 11 Finisher FS-602 Finisher FS-504 +Punch Kit PK-505 No.
Before Making Copies 2 bizhub 750/600 2-11 Before Making Copies Chapter 2 Cover Sheet Feeder PI-501 1 2 3 4 5 6 No. Part Name Descri ption 1 Cover sheet fe eder control pan el Operate wh en manually u.
2 Before Making Copies 2-12 bizhub 750/600 Before Making Copies Chapter 2 Z-Folding unit ZU-602 1 6 5 4 3 2 No. Part Name Description 1 Front door of the Z-folding unit Opened when clearing paper misf.
Before Making Copies 2 bizhub 750/600 2-13 Before Making Copies Chapter 2 Shift Tray SF-601 12 No. Part Name Descri ption 1 Exit tray Collects printed pages 2 Upper cover Opened when cl earing paper m.
2 Before Making Copies 2-14 bizhub 750/600 Before Making Copies Chapter 2 Control Panel No. Part Nam e De scription 1 [Power Save] key Press to en ter Low Power mode . While the machin e is in Low Power mode, the indicator on th e [Power Save] key lights up in green and the touch panel goes off.
Before Making Copies 2 bizhub 750/600 2-15 Before Making Copies Chapter 2 8 [Reset] k ey Press to clear all settings (except programmed settings) entered in the control panel and touch panel.
2 Before Making Copies 2-16 bizhub 750/600 Before Making Copies Chapter 2 2 Reminder Do not apply extreme pressur e to the touch panel, otherwise it may be scratched or damaged. Never push down on the touch panel with force, and never use a hard or pointed object to make a selection in the touch panel.
Before Making Copies 2 bizhub 750/600 2-17 Before Making Copies Chapter 2 Basic Settings Screen (Basic Screen) When the machine is ready to begin making copies after being turned on, the Basic screen appears. To activate a function or to select a setting, lightly touch the desired button in the touch panel.
2 Before Making Copies 2-18 bizhub 750/600 Before Making Copies Chapter 2 Icons That Appear in the Touch Panel 8 [Save in User Box] key (Appears only when th e hard disk drive is installed) Touch while outputting scann ed original data to save the data in a box.
Before Making Copies 2 bizhub 750/600 2-19 Before Making Copies Chapter 2 Indicates that less than 25% of the paper remains in the paper tray Indicates that no paper remains in the paper tray Indicate.
2 Before Making Copies 2-20 bizhub 750/600 Before Making Copies Chapter 2 2.2 Adjusting the Angle of the Control Panel The control panel can be adjusted to either of two angles.
Before Making Copies 2 bizhub 750/600 2-21 Before Making Copies Chapter 2 The control panel stops at the lower position. 2 To return the control panel to the upper posi- tion, press the control panel release lever, and then pull up on t he con- trol panel.
2 Before Making Copies 2-22 bizhub 750/600 Before Making Copies Chapter 2 2.3 Turning on the Main Power and the Sub Power This machine has two power controls: the main power switch and the sub power switch. To turn on the machine The main power switch turns on/off all functions of the machine.
Before Making Copies 2 bizhub 750/600 2-23 Before Making Copies Chapter 2 3 Turn on the sub power switch. ! Detail When the control panel is turned on by usin g the sub power switch, the indicator on the [Start] key lights up in orange, and a screen indicating that the machine is starting up appears.
2 Before Making Copies 2-24 bizhub 750/600 Before Making Copies Chapter 2 To scan during warm-up 1 Turn on the sub power switch. The indicator on the [Start] key lights up in orange. ? How is the machine turned on? % For details on turning on the machine, refer to “To turn on the ma- chine” on page 2-22.
Before Making Copies 2 bizhub 750/600 2-25 Before Making Copies Chapter 2 5 Position the original to be copied. ? How is the original positioned? % For details on positioning the original to be copied, refer to “Posi- tioning the Original” on page 3-7.
2 Before Making Copies 2-26 bizhub 750/600 Before Making Copies Chapter 2 To turn off the machine 1 Turn off the sub power switch. The touch panel goes off.
Before Making Copies 2 bizhub 750/600 2-27 Before Making Copies Chapter 2 ! Detail The following are cleared when the main po wer switch and sub power switch are turned off.
2 Before Making Copies 2-28 bizhub 750/600 Before Making Copies Chapter 2 Automatically Conserving Energy (Low Power Mode) If no operation is performed for a specified length of time, the touch panel goes off and the machine automatically enters a mode where it conse rves energy.
Before Making Copies 2 bizhub 750/600 2-29 Before Making Copies Chapter 2 Automatically Conservin g Energy (Sleep Mode) If no operation is performed for a specified length of time, the machine auto- matically enters a mode where it con serves energy.
2 Before Making Copies 2-30 bizhub 750/600 Before Making Copies Chapter 2 Manually Conserving Energy The machine can be manually set to an en ergy conservation mode. % Press the [Power Save] key. – As the factory de- fault, the machine enters Low Power mode.
Before Making Copies 2 bizhub 750/600 2-31 Before Making Copies Chapter 2 Limiting Machine Usage According to a Schedule (Weekly Tim er) The machine can be set to automatically enter Sleep mode according to a usage schedule determined by the administrator or limitations on the use of the machine can be specified.
2 Before Making Copies 2-32 bizhub 750/600 Before Making Copies Chapter 2 4 Using the keypad, type in the length of time until the machine enters Sleep mode again. Specify a length of time between 5 minutes and 9 hours and 59 min- utes. ? How can a single digit be input? % First, type in “0”.
Before Making Copies 2 bizhub 750/600 2-33 Before Making Copies Chapter 2 Controlling the Use of This Machine With User Authentication If the administrator has specified the use r authenticat ion settings, only the permitted users can use this machi ne.
2 Before Making Copies 2-34 bizhub 750/600 Before Making Copies Chapter 2 3 Touch [Password]. 4 Type in the password, and then touch [OK]. 5 Press the [Access] key. The input screen disap- pears, and the Basic screen appears. 6 Make copies using the desired copy settings.
Before Making Copies 2 bizhub 750/600 2-35 Before Making Copies Chapter 2 7 When you finish printing, press the [Access] key. A message appears, requesting confirmation to log off.
2 Before Making Copies 2-36 bizhub 750/600 Before Making Copies Chapter 2 Using the Machine With Account Track If user authentication or account track has been set by the administrator, only users of registered accounts can use this machine.
Before Making Copies 2 bizhub 750/600 2-37 Before Making Copies Chapter 2 3 Touch [Password]. 4 Type in the password, and then touch [OK]. 5 Press the [Access] key. The input screen disap- pears, and the Basic screen appears. 6 Make copies using the desired copy settings.
2 Before Making Copies 2-38 bizhub 750/600 Before Making Copies Chapter 2 7 When you are finished printing, press the [Access] key. A message appears, requesting confirmation to log off.
Before Making Copies 2 bizhub 750/600 2-39 Before Making Copies Chapter 2 2.4 Loading Paper Into the Tray 1 or 2 To load paper (tray 1 or 2) 1 Pull out the paper tray for the tray 1 or 2. 2 Raise the paper take-up roller. 3 Load the paper into the tray.
2 Before Making Copies 2-40 bizhub 750/600 Before Making Copies Chapter 2 4 Fully push in the paper tray. 2 Reminder Do not load so much paper that the top of the stack is higher than the , mark. Make sure that the trailing-edge guide is adjusted to fit the size of the loaded paper.
Before Making Copies 2 bizhub 750/600 2-41 Before Making Copies Chapter 2 2.5 Loading Paper Into the Tray 3 or 4 To load paper (tray 3 or 4) 1 Pull out the paper tray for the tray 3 or 4. 2 Raise the paper take-up roller. 3 Load the paper into the tray.
2 Before Making Copies 2-42 bizhub 750/600 Before Making Copies Chapter 2 4 Slide the lateral guide to fit the size of paper being loaded. – Move the lateral guide while holding the release button pressed. When the button is released, the guide is locked in place.
Before Making Copies 2 bizhub 750/600 2-43 Before Making Copies Chapter 2 2 Reminder Do not close the paper tray with too much force, otherwise the weight of the tray and paper will apply an impact to the machine that may cause damage.
2 Before Making Copies 2-44 bizhub 750/600 Before Making Copies Chapter 2 2.6 Loading Paper Into the Bypass Tray Feed paper through the bypass tray when you wish to copy onto paper with a size not loaded into a paper tray or onto overhead projector transparencies or trace paper.
Before Making Copies 2 bizhub 750/600 2-45 Before Making Copies Chapter 2 3 Slide the lateral guides to fit the size of paper being loaded. ! Detail The image will be printed on the surface of the paper facing up when the paper is loaded into the bypass tray.
2 Before Making Copies 2-46 bizhub 750/600 Before Making Copies Chapter 2 2 Reminder When loading overhead projector tran sparencies, load them in the v ori- entation, as shown in the illustration. Do not load overhead projector transparencies in the w orientation.
Before Making Copies 2 bizhub 750/600 2-47 Before Making Copies Chapter 2 2 Reminder Be sure to load letterhead paper so that the side to be printed on faces up. 2 Note The image will be printed on the surface of the paper facing down when the paper is loaded into the bypass tray.
2 Before Making Copies 2-48 bizhub 750/600 Before Making Copies Chapter 2 2.7 Loading Paper Into the LCT (LU-401/LU-402) 2 Reminder If the machine is turned off, the bottom plate cannot be raised. In addi- tion, the bottom plate cannot be lowered, even after the bottom-plate- lowering button is pressed.
Before Making Copies 2 bizhub 750/600 2-49 Before Making Copies Chapter 2 3 Load the paper into the tray. (LU-401) (LU-402).
2 Before Making Copies 2-50 bizhub 750/600 Before Making Copies Chapter 2 4 Repeat steps 2 and 3 until the bottom plate cannot be lowered any further. 5 Close the upper door of the large capacity tray. 2 Reminder Do not load the LCT with paper of other sizes than previously specified.
Before Making Copies 2 bizhub 750/600 2-51 Before Making Copies Chapter 2 2.8 Loading Paper of a Different Size Into Paper Trays The paper loaded into the tray 3 and 4 can be change d to that of a different size. 2 Note To load paper of a different size into the tray 1 and 2 and the LCT (LU- 401/LU-402), contact your tec hnical representative.
2 Before Making Copies 2-52 bizhub 750/600 Before Making Copies Chapter 2 4 Load paper of the new size, and then slide the lateral guide to fit the size of the paper. – Move the lateral guide while holding the release button pressed. When the button is released, the guide is locked in place.
Before Making Copies 2 bizhub 750/600 2-53 Before Making Copies Chapter 2 2 Reminder Be sure to insert the trailing-e dge guide at the position for the specified size. If there is space between the trail ing-edge guide and the paper, the paper will not be fed correctly.
2 Before Making Copies 2-54 bizhub 750/600 Before Making Copies Chapter 2 3 Set the conveyance lever to “5.5 × 8.5 A5 Thick paper”. 4 Return the ADU unit t o its original position. 5 Close the front doors (left and right). 2 Note After using thick paper, be sure to reset the conveyance lever to “NOR- MAL”.
3 Basic Copy Operations Chapter 3 Basic Copy Operations.
3 Basic Copy Operations 3-2 bizhub 750/600 Basic Copy Operations Chapter 3 3 Basic Copy Operations 3.1 General Copy Operation This section contains information on the general opera tion for making cop- ies. The following procedure describes how to copy a single-sided original using basic copy operations.
Basic Copy Operations 3 bizhub 750/600 3-3 Basic Copy Operations Chapter 3 3 Specify the necessary copy settings. – The default settings when this machine is purchased are listed be- low. [Density/Background]: Auto (Den sity), Standard (Background Re- moval) [Paper]: Auto Paper Select [Zoom]: Full size (× 1.
3 Basic Copy Operations 3-4 bizhub 750/600 Basic Copy Operations Chapter 3 4 Using the keypad, type in the desired number of copies. – If the number of cop- ies was incorrectly entered, press the [C] (clear) key in the keypad, and then specify the correct number of copies.
Basic Copy Operations 3 bizhub 750/600 3-5 Basic Copy Operations Chapter 3 3.2 Operations That Cannot Be Combined Certain copy settings cannot be used together. Specifying settings that cannot be combined will result in one of the follow- ing. - The setting specified last is given priority.
3 Basic Copy Operations 3-6 bizhub 750/600 Basic Copy Operations Chapter 3 Operations where the setting specified first is given priority If a warning message appears, indicating that settings cannot be combined, those settings cannot be specified together.
Basic Copy Operations 3 bizhub 750/600 3-7 Basic Copy Operations Chapter 3 3.3 Positioning the Original The original can be fed in either of the following two ways. Be sure to position the original correctly according to the type of original being cop ied.
3 Basic Copy Operations 3-8 bizhub 750/600 Basic Copy Operations Chapter 3 2 Adjust the paper guides to the size of the original. – For details on load- ing original of mixed sizes, refer to “Copy- ing Original of Mixed Sizes (“Mixed Origi- nal” Setting)” on page 3-15.
Basic Copy Operations 3 bizhub 750/600 3-9 Basic Copy Operations Chapter 3 To position the origin al on the original glass 0 For details on the types of original that can be placed on the original glass, refer to “Originals” on page 7-33. 0 Do not place objects weighing more than 6.
3 Basic Copy Operations 3-10 bizhub 750/600 Basic Copy Operations Chapter 3 3 Align the original with the mark in the back- left corner of the meas- uring guides. – For details on select- ing the original orien- tation, refer to “Selecting the Origi- nal Orientation (Orig- inal Direction Settings)” on page 3-20.
Basic Copy Operations 3 bizhub 750/600 3-11 Basic Copy Operations Chapter 3 Scanning the Original in Separate Batch es (“Separate Scan” Setting) A large original can be divided and scanned in a number of batches. A maximum of 100 original pages can be loaded into th e ADF at one time.
3 Basic Copy Operations 3-12 bizhub 750/600 Basic Copy Operations Chapter 3 3 Press the [Start] key. – Repeat this step until all pages of the origin al have been scanned. – The amount of memory available can be checked beside “Memory” in the upper-right corner of the Basic screen.
Basic Copy Operations 3 bizhub 750/600 3-13 Basic Copy Operations Chapter 3 Scanning a Multi-Page Original from the Original Glass When making double-sided or combined copies using the original glass, place each page of a multi-page original on the original glass to scan it.
3 Basic Copy Operations 3-14 bizhub 750/600 Basic Copy Operations Chapter 3 5 Touch [1 2], and then touch [OK]. 6 Press the [Start] key. Scanning begins. After the original has been scanned, the message “Scanning stopped. Press [Start] to continue.” appears.
Basic Copy Operations 3 bizhub 750/600 3-15 Basic Copy Operations Chapter 3 3.4 Specifying Original Settings The following procedure describes how to specify the type of original to be copied.
3 Basic Copy Operations 3-16 bizhub 750/600 Basic Copy Operations Chapter 3 2 Position the original face up in the ADF. Slide the adjustable pa- per guides against the edges of the original. – Load the original pages into the ADF so that the top of the pages is toward the back or the left side of the machine.
Basic Copy Operations 3 bizhub 750/600 3-17 Basic Copy Operations Chapter 3 Positioning Fold ed (Z-Folded) Origi nal If folded original are loaded into the ADF to be copied, the original size is cor- rectly detected.
3 Basic Copy Operations 3-18 bizhub 750/600 Basic Copy Operations Chapter 3 3 Touch [Z-Folded Original]. – To cancel the “Z-Folded Original” setting, touch [Z-Folded Original] again to deselect it. Positioning T abbed Original Tabbed original, including the tab, can be copied onto tabbed p aper.
Basic Copy Operations 3 bizhub 750/600 3-19 Basic Copy Operations Chapter 3 3 In the Basic screen, touch [Combine Originals]. The Combine Originals screen appears. 4 Touch [Tab Original]. The Tab Original Size screen appears. 5 Touch the button for the size of the positioned original.
3 Basic Copy Operations 3-20 bizhub 750/600 Basic Copy Operations Chapter 3 Selecting the Original O rientation (Original Direction Settings) When copying double-sided original, making double-sided co.
Basic Copy Operations 3 bizhub 750/600 3-21 Basic Copy Operations Chapter 3 To specify an Original Direction setting 0 For details on positioning the document, refer to “Positioning the Origi- nal” on page 3-7. 1 Position the original to be copied.
3 Basic Copy Operations 3-22 bizhub 750/600 Basic Copy Operations Chapter 3 4 Touch the button for the orienta tion of the positioned original, and then touch [OK].
Basic Copy Operations 3 bizhub 750/600 3-23 Basic Copy Operations Chapter 3 Original Bi nding Margin Position Margin Setting Icon Description Select this setting if the original is positioned with the binding margin at the left. Select this setting if the original is posi- tioned with the binding margin at the right.
3 Basic Copy Operations 3-24 bizhub 750/600 Basic Copy Operations Chapter 3 To specify a Margin setting 0 For details on positioning the original, refer to “Positioning the Original” on page 3-7.
Basic Copy Operations 3 bizhub 750/600 3-25 Basic Copy Operations Chapter 3 4 Touch the button for the desired margin position, and then touch [OK]. – To cancel changes to the settings, touch [Cancel].
3 Basic Copy Operations 3-26 bizhub 750/600 Basic Copy Operations Chapter 3 3.5 Selecting a Paper Setting The paper size can be selected automatic ally according to the original si ze or it can be specified man ually. Specify the pa per size according to the cor- responding procedure, depending on the desired copy settings.
Basic Copy Operations 3 bizhub 750/600 3-27 Basic Copy Operations Chapter 3 1 In the Basic screen, touc h [Paper]. The Paper screen appears. 2 Touch [Auto Paper Select].
3 Basic Copy Operations 3-28 bizhub 750/600 Basic Copy Operations Chapter 3 Manually Selecting the Desired Paper Size 0 By also selecting the “Auto Zoom” setting, the most appropriate z oom ra- tio is selected based on the size of the positioned original and the spec- ified paper size.
Basic Copy Operations 3 bizhub 750/600 3-29 Basic Copy Operations Chapter 3 3.6 Specifying a Zoom Setting The zoom ratio can be set in order to make a copy on paper with a size dif- ferent than the original or to enlarge or reduce the size of the copy image.
3 Basic Copy Operations 3-30 bizhub 750/600 Basic Copy Operations Chapter 3 Specifying the Same Zoom Ratio as the Original (“×1.0” Setting) A copy that is the same size as the original (×1.000) is produ ced. 0 Touch [+] to enlarge the zoom ratio, and touch [–] to redu ce the zoom ra- tio in ×0.
Basic Copy Operations 3 bizhub 750/600 3-31 Basic Copy Operations Chapter 3 Slightly Reducing the Copy (“Minimal” Setting) The copy of an original where the imag e is printed to the edges of the paper can be slightly reduced so that no part of the im age is cut off in the copy.
3 Basic Copy Operations 3-32 bizhub 750/600 Basic Copy Operations Chapter 3 Selecting a Preset Zoom Ratio (Enlarge and Redu ce Settings) The most appropriate zoom ratio can be selected for copying from a com- mon standard original size to a standard pap er size.
Basic Copy Operations 3 bizhub 750/600 3-33 Basic Copy Operations Chapter 3 Typing In the Zoom Ratio (Zoom wit h Constant X and Y Ratio Setting) By using the keypad, a zoom ratio between ×0.250 and ×4.000 c an be typed in directly without changing the height-to-width ratio.
3 Basic Copy Operations 3-34 bizhub 750/600 Basic Copy Operations Chapter 3 3 Touch the button under “Zoom with Constant X and Y Ratio”, and then use the keypad to type in the desired zoom ratio. – To cancel changes to th e settings, touch [Cancel].
Basic Copy Operations 3 bizhub 750/600 3-35 Basic Copy Operations Chapter 3 Typing In Separate X and Y Zoom Ratios (Independent Zoom Settings) By using the keypad, separate zoom ratios can be typed in directly for the horizontal direction (between ×0.
3 Basic Copy Operations 3-36 bizhub 750/600 Basic Copy Operations Chapter 3 2 Touch [XY Zoom]. 3 Touch [X] under “Set Indi vidual Zoom”, and then use the keypad to type in the desired zoom ratio (between ×0.
Basic Copy Operations 3 bizhub 750/600 3-37 Basic Copy Operations Chapter 3 Selecting a Stored Zoom Ratio Copy zoom ratios that have been stored can be recalled to be used when de- sired. In addition, stored copy zoom ratios can be changed. 0 Touch [+] to enlarge the zoom ratio, and touch [–] to reduce the zoom ra- tio in × 0.
3 Basic Copy Operations 3-38 bizhub 750/600 Basic Copy Operations Chapter 3 Storing the Desired Zoom Ratio Three frequently used zoom ratios and the zoom r atio for the “Minimal” set- ting can be stored. 0 If a value outside of the allowable range i s specified, the message “Input Error” appears.
Basic Copy Operations 3 bizhub 750/600 3-39 Basic Copy Operations Chapter 3 3 Touch the button under “Zoom with Constant X and Y Ratio”, and then use the keypad to type in the desired zoom ratio (between ×0.250 and ×4.000). – To cancel changes to the settings, touch [Cancel].
3 Basic Copy Operations 3-40 bizhub 750/600 Basic Copy Operations Chapter 3 3.7 Selecting a Simplex/Duplex Setting (1-Side/2-Sides Settings) The type of original and copy can be speci fied.
Basic Copy Operations 3 bizhub 750/600 3-41 Basic Copy Operations Chapter 3 The following procedures describe how to select a 1-Side/2-Sides setting. 2 2 Select this setting to produce double-sided copies from double-sided original.
3 Basic Copy Operations 3-42 bizhub 750/600 Basic Copy Operations Chapter 3 To select single-sided copies 0 The default setting is “1 1”. 0 If “2 1” is selected, specify the position of the binding margin and the loading orientation for the original, otherwise the copies will not be print- ed as desired.
Basic Copy Operations 3 bizhub 750/600 3-43 Basic Copy Operations Chapter 3 To select double-sided copies 0 Press the [Stop] key while an original is being scanned or a job is being printed.
3 Basic Copy Operations 3-44 bizhub 750/600 Basic Copy Operations Chapter 3 2 Touch [1 2] or [2 2]. 3 Touch [OK]. The Basic screen appears again..
Basic Copy Operations 3 bizhub 750/600 3-45 Basic Copy Operations Chapter 3 3.8 Selecting the Quality of the Original Positioning Orig inal With Small Print or Photos (O rig. Image Type Set- tings) Select the setting for the text and image type of the document to better ad- just the copy quality.
3 Basic Copy Operations 3-46 bizhub 750/600 Basic Copy Operations Chapter 3 To specify an Orig. Image Type setting 0 For details on positioning the original, refer to “Positioning the Original” on page 3-7. 1 Position the original to be copied. 2 In the Basic screen, touch [Orig.
Basic Copy Operations 3 bizhub 750/600 3-47 Basic Copy Operations Chapter 3 3.9 Specifying the Density Settings The density can be adjusted to print a copy that is darker or lighter than the current print result. The following two density adjustments are available.
3 Basic Copy Operations 3-48 bizhub 750/600 Basic Copy Operations Chapter 3 Adjusting the Print Density (Den sity Settings) 1 In the Basic screen, touc h [Density]. The Density screen appears. 2 Select the desired Density setting. – Each time [Light] or [Dark] is touched, the density is lightened or darkened by one level.
Basic Copy Operations 3 bizhub 750/600 3-49 Basic Copy Operations Chapter 3 Adjusting the Background Density (Adjust Background Settings) 1 In the Basic screen, touc h [Density]. The Density screen appears. 2 Select the desired background density setting.
3 Basic Copy Operations 3-50 bizhub 750/600 Basic Copy Operations Chapter 3 3.10 Selecting a Combine Originals Setting Original images of multiple pages (2, 4 or 8 pages) can be combined and printed on a single page, reducing paper use.
Basic Copy Operations 3 bizhub 750/600 3-51 Basic Copy Operations Chapter 3 The following three Combine Ori ginals settings are available. The following procedure describes how to select a Combine Originals set- ting. Combine Originals Setting Description 2 in 1 Select this set ting to print two original pages on one page.
3 Basic Copy Operations 3-52 bizhub 750/600 Basic Copy Operations Chapter 3 Copying Multiple Original Pages On to a Single Page (Co mbine Originals) 1 In the Basic screen, touch [Combine Originals]. The Combine Originals screen appears. 2 Select the desired combination of pages.
Basic Copy Operations 3 bizhub 750/600 3-53 Basic Copy Operations Chapter 3 3.11 Selecting Finishing Settings Various settings are avai lable for sorting and finishing copies when th ey are fed into the copy exit tray. The Staple settings are available only if optional finisher FS-504 or FS-602 is installed.
3 Basic Copy Operations 3-54 bizhub 750/600 Basic Copy Operations Chapter 3 Finishing Setting Description Sort Select this sett ing to separate each set of a multi-page ori ginal (collated).(Refer to page 3-56) Group Select this se tting to separate the copies of eac h page in a multi-page original (uncollated).
Basic Copy Operations 3 bizhub 750/600 3-55 Basic Copy Operations Chapter 3 The following procedures describe how to select Finishing settings. Face Up Select this setting to fe ed out copies with the front side facing up.(Refer to page 3-58) Staple Select one of these settings to bind the copies with a staple in the corner or with two staples.
3 Basic Copy Operations 3-56 bizhub 750/600 Basic Copy Operations Chapter 3 Separating Copies by Sets (“Sort” Setting) 0 As the default setting, “Group” is selected. 0 If “Offset” is selected while no finisher is installed, crisscross sorting will be performed.
Basic Copy Operations 3 bizhub 750/600 3-57 Basic Copy Operations Chapter 3 Separating Copies by Pages (“Group ” Setting) 0 As the default “Group” is selected. 0 If “Offset” is selected while no finisher is installed, crisscross sorting will be performed.
3 Basic Copy Operations 3-58 bizhub 750/600 Basic Copy Operations Chapter 3 Feeding Out Copies Face Up (“Face Up” Settin g) Copies can be fed out so that the front side faces up. 0 Either “Sort” or “Group” can be selected. 1 In the Basic screen, touc h [Finishing].
Basic Copy Operations 3 bizhub 750/600 3-59 Basic Copy Operations Chapter 3 Stapling Copies (Staple Settings) ! Detail 4 to 12-1/4in. (width) × 7-3/4 to 18in. (length) In order for the copies to be stapled, all of the following con ditions must be met.
3 Basic Copy Operations 3-60 bizhub 750/600 Basic Copy Operations Chapter 3 When Finisher FS-504 is installed 11 × 17 w 2 to 9 sheets 50 sets 10 to 20 sheets 50 sets 21 to 30 sheets 30 sets 31 to 40 .
Basic Copy Operations 3 bizhub 750/600 3-61 Basic Copy Operations Chapter 3 To bind copies with staples 1 In the Basic screen, touc h [Finishing]. The Finishing screen appears. 2 Under “Staple”, touch either [Corner] or [2 Position]. – To cancel the Staple settings, touch [Corner] or [2 Position ] again to deselect it.
3 Basic Copy Operations 3-62 bizhub 750/600 Basic Copy Operations Chapter 3 – Touch [Auto] to automatically determine the stapling position ac- cording to the orientation of the loa ded original. If the original length(X) is 11-11/16 in. or less, the long side of the paper is sta- pled.
Basic Copy Operations 3 bizhub 750/600 3-63 Basic Copy Operations Chapter 3 Punching Holes in Copies (Punch Settings) ! Detail In order for holes to be punched in the copies, all of the following condi- tions must be met. The paper width must be between 5-13/16 in.
3 Basic Copy Operations 3-64 bizhub 750/600 Basic Copy Operations Chapter 3 To punch holes in copies 1 In the Basic screen, touc h [Finishing]. The Finishing screen appears. 2 Touch [2-Hole] or [3-Hole]. – To separate each set of pages and punch them, touch [Offset].
Basic Copy Operations 3 bizhub 750/600 3-65 Basic Copy Operations Chapter 3 – Touch [Auto] to automati cally determine the position of the punched holes according to the orientation of the positioned origi- nal. If the original length is 11-11/16 in.
3 Basic Copy Operations 3-66 bizhub 750/600 Basic Copy Operations Chapter 3 3.12 Specifying Folding Settings If options are installed, copies can be folded before being fed out. The fol- lowing Folding settings are available. The available settings differ depending on the options that are installed.
Basic Copy Operations 3 bizhub 750/600 3-67 Basic Copy Operations Chapter 3 To fold copies at the center (“Half Fold”) 0 As the default setting, the “Booklet” function is automatically specified when “Half Fold” is selected. 1 In the Basic screen, touc h [Folding].
3 Basic Copy Operations 3-68 bizhub 750/600 Basic Copy Operations Chapter 3 3 Touch [OK]. The Basic screen appears again. When finisher FS-602 is install ed To bind copies at the center (“Fold & Staple”) 0 If a cover sheet is added with the “Cover Mode” function, t he cover sheet (53-1/4 lb) can be stapled.
Basic Copy Operations 3 bizhub 750/600 3-69 Basic Copy Operations Chapter 3 2 Touch [Fold & Staple]. – To cancel changes to the settings, touch [Cancel]. – To cancel the “Fold & Staple” setting, touch the button for a differ- ent setting.
3 Basic Copy Operations 3-70 bizhub 750/600 Basic Copy Operations Chapter 3 1 In the Basic screen, touc h [Folding]. The Folding screen appears. 2 Touch [Z-Fold]. – To cancel changes to th e settings, touch [Cancel]. – To cancel the “Z-Fold” setting, touch th e button for a di fferent set- ting.
Basic Copy Operations 3 bizhub 750/600 3-71 Basic Copy Operations Chapter 3 1 In the Basic screen, touc h [Folding]. The Folding screen appears. 2 Touch [Tri-Fold]. – To cancel changes to the settings, touch [Cancel]. – To cancel the “Z-Fold” setting, touch the button for a dif ferent set- ting.
3 Basic Copy Operations 3-72 bizhub 750/600 Basic Copy Operations Chapter 3 3.13 Scanning the Next Original To Be Copied While a Copy Job Is Being Printed (Next Job Reservation) The settings for the n.
Basic Copy Operations 3 bizhub 750/600 3-73 Basic Copy Operations Chapter 3 2 When the message “Ready to acce pt another job.” appears, copy set- tings can be specified for the next copy job. 3 Press the [Start] key. 4 After the current copy job is finished, the next copy job begins.
3 Basic Copy Operations 3-74 bizhub 750/600 Basic Copy Operations Chapter 3 3.14 Stopping Scanning/Printing The following procedure describes how to stop scanning the original and stop the printing operation . To stop scanning/printing 0 If an original is being scanned for a job, pressing [Stop] key stops scan- ning.
Basic Copy Operations 3 bizhub 750/600 3-75 Basic Copy Operations Chapter 3 3.15 Deleting a Stopped Job The following procedure describes how to delete a stopped job. To delete a st opped job 0 For details on stopping a job being printed, refer to “Stopping Scanning/ Printing” on page 3-74.
.
4 Additional Copy Operations Chapter 4 Additional Copy Operations.
4 Additional Copy Operations 4-2 bizhub 750/600 Additional Copy Operations Chapter 4 4 Additional Copy Operations 4.1 Checking the Copy Settings (Mode Check) From the Mode Check screens, the current copy settings can be check ed and changed if desired.
Additional Copy Operations 4 bizhub 750/600 4-3 Additional Copy Operations Chapter 4 The Mode Check screen appears..
4 Additional Copy Operations 4-4 bizhub 750/600 Additional Copy Operations Chapter 4 2 After checking the settings, tou ch [Job End] or press the [Mode Check] key. The Basic screen appears again. ! Detail There are three Mode Check scre ens.The number of the currentl y dis- played screen a ppears to the right of the scree n title.
Additional Copy Operations 4 bizhub 750/600 4-5 Additional Copy Operations Chapter 4 4.2 Printing a Proof Copy To Be Checked (Proof Copy) Before printing a large number of copies, a single proof copy can first be printed to be checked. This prevents copy errors from occurring.
4 Additional Copy Operations 4-6 bizhub 750/600 Additional Copy Operations Chapter 4 – The number under “Number of Sets” in the screen that appeared when a sample copy is printed indicates th e number of copies that are sample copies/total numbe r of copies specified.
Additional Copy Operations 4 bizhub 750/600 4-7 Additional Copy Operations Chapter 4 7 Press the [Proof Copy] key to print another sample copy. – If copying stops while the proof copy screen or the Change Setting screen is displayed after the proof copy was printed, press the [Re- set] key.
4 Additional Copy Operations 4-8 bizhub 750/600 Additional Copy Operations Chapter 4 4.3 Interrupting a Copy Job (Interrupt Mode) The current jobs can be temporarily interrupted so an original can be copied with different co py settings. This is convenient for quickly making a copy.
Additional Copy Operations 4 bizhub 750/600 4-9 Additional Copy Operations Chapter 4 5 After the interrupting job is finished printing, press the [Interrupt] key. The indicator on the [Interrupt] key goes o ff, and Interrupt mode is can- celed. The settings return to those specified before printing was interrupted.
4 Additional Copy Operations 4-10 bizhub 750/600 Additional Copy Operations Chapter 4 4.4 Registering Copy Programs (Mode Memory) Up to 30 copy programs can be registered. A name of up to 16 characters can be specified for the registered copy pro- grams.
Additional Copy Operations 4 bizhub 750/600 4-11 Additional Copy Operations Chapter 4 ? Can the copy program name be corrected? % To change the entered copy program name, touch the button whose name is to be changed, and then touch [Edit Name]. 4 Use the keyboard that appea rs in the touch pa nel to type in the name of the copy program.
4 Additional Copy Operations 4-12 bizhub 750/600 Additional Copy Operations Chapter 4 6 Touch [OK] or [Cancel]. – To return to the Basic screen, pres s the [Mode Memory] key.
Additional Copy Operations 4 bizhub 750/600 4-13 Additional Copy Operations Chapter 4 To delete a copy program 1 In the Recall Copy Program screen, touch the button for the copy pro- gram to be deleted. 2 Touch [Del.]. A message appears, requesting confirmation to delete the copy pro- gram.
4 Additional Copy Operations 4-14 bizhub 750/600 Additional Copy Operations Chapter 4 4.5 Copying With Programmed Copy Settings (Mode Memory) To recall a stored job Programmed copy settings can be recalled to be used again for copying. 1 Position the original to be copied.
Additional Copy Operations 4 bizhub 750/600 4-15 Additional Copy Operations Chapter 4 4 Touch [Check Job]. The Mode Check screens for the copy job appear. The buttons for functions where the setting has been change d from the default appear selected. 5 Check the copy settings registered wi th th e selected copy program.
4 Additional Copy Operations 4-16 bizhub 750/600 Additional Copy Operations Chapter 4 2 Note To stop recalling the copy program, press the [Reset] key or the [Mode Memory] key, or touch [Cancel]. The copy settings cannot be changed from the Mode Check screens.
Additional Copy Operations 4 bizhub 750/600 4-17 Additional Copy Operations Chapter 4 4.6 Displaying Function Descriptions (Help) Descriptions of the various functions and details of operations can be viewed. There are two methods for displaying the Help screens.
4 Additional Copy Operations 4-18 bizhub 750/600 Additional Copy Operations Chapter 4 Help Menu screen (2nd level) (Example: [Copy]) ! Detail The items displayed in th e Help menu for the [Name and function of each part] differ depending on the options that are installed.
Additional Copy Operations 4 bizhub 750/600 4-19 Additional Copy Operations Chapter 4 ! Detail The numbers to the right of the screen title (“1/4” in the previous screen) indicate the number of the currently displayed screen/total number of Help screens for the dis played item.
4 Additional Copy Operations 4-20 bizhub 750/600 Additional Copy Operations Chapter 4 To display the Main Help Menu screen When a Help screen can be displayed, appears in the upper-left corner of the screen.
Additional Copy Operations 4 bizhub 750/600 4-21 Additional Copy Operations Chapter 4 The Help Menu [Copy] screen appears. ? Is there more infor- mation about the buttons of the Help screens? % Refer to “Overview of Help Screens” on page 4-17.
4 Additional Copy Operations 4-22 bizhub 750/600 Additional Copy Operations Chapter 4 To display the Help screen while specifying a setting Help can be displayed for the copy settings that are being specified. 1 Display the setting screen for the desired copy setting, and then press the [Help] key.
Additional Copy Operations 4 bizhub 750/600 4-23 Additional Copy Operations Chapter 4 4.7 Specifying Control Panel Settings (Accessibility Mode) This section contains details on the procedures for specifying control panel settings and adjusting the touch panel.
4 Additional Copy Operations 4-24 bizhub 750/600 Additional Copy Operations Chapter 4 2 Touch [Key Repeat Start/Interval Time] or press the [1] key in the k ey- pad. The Key Repeat Start/In- terval Time screen ap- pears. 3 Touch [+] and [–] to specify the starting time and the i nterval for the key repeat feature.
Additional Copy Operations 4 bizhub 750/600 4-25 Additional Copy Operations Chapter 4 4 Touch [OK]. The Accessibility Setting sc reen appears again. 5 Touch [Close] or press the [Accessibility] key. The Basic screen appears again. 2 Note The Enlarge Display mode functions in Copy mode are limited to basic copy functions.
4 Additional Copy Operations 4-26 bizhub 750/600 Additional Copy Operations Chapter 4 To set the “Enlarge Display Timer Setting” function When the automatic system reset operation is performed in Enlarge Display mode, a message requesting confirmation to cancel Enlarge Display mode can be displayed.
Additional Copy Operations 4 bizhub 750/600 4-27 Additional Copy Operations Chapter 4 The Enlarge Display Tim- er Setting screen ap- pears. 3 Select the desired setting. – To not display the message requesting confirmation to cancel En- large Display mode, touch [OFF].
4 Additional Copy Operations 4-28 bizhub 750/600 Additional Copy Operations Chapter 4 To set the “Message Display Time” function It is possible to specify the length of time for displaying warning messages, which appear, for example, when an incorr ect oper ation is performed.
Additional Copy Operations 4 bizhub 750/600 4-29 Additional Copy Operations Chapter 4 3 Select setting for the desired amount of time that messages are dis- played. – Select whether messages are displayed for 3 seconds or for 5 sec- onds. – To cancel changes to the settings, touch [Cancel].
4 Additional Copy Operations 4-30 bizhub 750/600 Additional Copy Operations Chapter 4 To set the “Accept Sound Sett ing” function Specify the sound that is produced wh en a key is pressed. In addition, you can set whether or not a sound is produced when a control panel key is pressed or a touch panel button is touched.
Additional Copy Operations 4 bizhub 750/600 4-31 Additional Copy Operations Chapter 4 3 Touch [Key Accept Sound / Key Re fuse Sound] or press the [1] key in the keypad. The Accept Sound Set- ting screen appears. 4 Select the desired setting for “Accept Sound Setting”.
4 Additional Copy Operations 4-32 bizhub 750/600 Additional Copy Operations Chapter 4 6 Touch [OK]. The Accessibility Setting screen appears again. 7 Touch [Close] or press the [Accessibility] key.
Additional Copy Operations 4 bizhub 750/600 4-33 Additional Copy Operations Chapter 4 To set the “Touch Panel Volu me Adjust” function Specify the volume of the sound that is produce d when a control panel key is pressed or a touch panel button is touched.
4 Additional Copy Operations 4-34 bizhub 750/600 Additional Copy Operations Chapter 4 The Touch Panel Volume Adjust screen appears. 4 Select the desired volume. – Touch [Lower] or [Higher] to select the desired setting. – The volume can be set in 16 levels (between 0 and 16).
Additional Copy Operations 4 bizhub 750/600 4-35 Additional Copy Operations Chapter 4 To set the “Touch Panel Adj.” function If the touch panel buttons do not respond correctly, the position of buttons in the touch panel may not be correctly aligned with the position of the actual touch sensor and may need to be adjusted.
4 Additional Copy Operations 4-36 bizhub 750/600 Additional Copy Operations Chapter 4 3 Touch the four ch eck points ( ), making sure that a sound i s pro- duced with ea ch. – The check points ( ) can be touched in any order. – To reset the adjustment, press the [C] (clear) key, and then touch the four check points ( ).
5 Troubleshooting Chapter 5 Troubleshooting.
5 Troubleshooting 5-2 bizhub 750/600 Troubleshooting Chapter 5 5 Troubleshooting 5.1 When the Message “Malfunct ion detected.” App ears (Call Technical Representative) If a malfunct ion that cannot be corre cted by the user oc curred, the message “Malfunction detected.
Troubleshooting 5 bizhub 750/600 5-3 Troubleshooting Chapter 5 Touch to display the message shown in the following illustration. To call the technical representative 1 Write down the malfuncti on code (for example, C-0001) in the call tech- nical representative screen.
5 Troubleshooting 5-4 bizhub 750/600 Troubleshooting Chapter 5 4 Unplug the machine. 5 Contact the technical representative, and inform th em of the malfunc- tion code.
Troubleshooting 5 bizhub 750/600 5-5 Troubleshooting Chapter 5 5.2 When the Message “Misfeed detected.” Appears If a misfeed occurs during copying or printing, the message “Misfeed d etect- ed.” appears and the location of the misfeed is i ndicated in the screen.
5 Troubleshooting 5-6 bizhub 750/600 Troubleshooting Chapter 5 To clear a paper misfeed 1 In the JAM location displa y screen, touch [Illustration]. – If the description of the illustration extends over multiple pages, [Next → ] appears in the lower-right corner of the screen.
Troubleshooting 5 bizhub 750/600 5-7 Troubleshooting Chapter 5 3 After the procedure is finishe d, the Basic screen appears again. If paper misfeeds occurred at multiple locations, the JAM location dis- play screen appea rs again. Check the scree n for messages and the lo- cation of the next misfeed to be clea red, and then repeat steps 1 and 2.
5 Troubleshooting 5-8 bizhub 750/600 Troubleshooting Chapter 5 5.3 When the Message “Replenish paper.” Appears If a tray has run out of paper while copying or after printing, the message “Replenish paper.” appears. To replenish paper % Check which paper tray appears highlighted in the touch p anel, and then load it with paper.
Troubleshooting 5 bizhub 750/600 5-9 Troubleshooting Chapter 5 5.4 When the Message “... Not enough remaining memo- ry.” Appears This machine uses the memory to produce copies. Since the amount of memory available is limited, the message “Scanning cannot be continued.
5 Troubleshooting 5-10 bizhub 750/600 Troubleshooting Chapter 5 Memory Becomes Full While Queuing a Job This message appears when the memory becomes full and the scanned job was deleted while scanning a document for a job to be queued. Check the number of pages counted for the document, and then adjust the number of pages in the job to be queued.
Troubleshooting 5 bizhub 750/600 5-11 Troubleshooting Chapter 5 5.5 Simple Troubleshooting Main body Symptom Possible Cause Remedy The machine doe s not start up when the main power switch is turned on.
5 Troubleshooting 5-12 bizhub 750/600 Troubleshooting Chapter 5 There are dark specks or spots throughout the printed output. There are strea ks in the printed output. Is the original gla ss dirty? Wipe the glass with a soft, dry cloth. (See p. 10-3.) Is the left partition glass dirty? Wipe the glass with a soft, dry cloth.
Troubleshooting 5 bizhub 750/600 5-13 Troubleshooting Chapter 5 ADF The edge of the printed output is dirty. Is the ADF platen guide cover dirty? Wipe the ADF platen guide cover with a soft, dry cl oth. (See p. 10-4.) Was the selecte d paper size larger than t he document (with a Zoom setting of “×1.
5 Troubleshooting 5-14 bizhub 750/600 Troubleshooting Chapter 5 Finisher If any message other than those li sted above appears, perform the operation described in the message. If the problem is not corrected after the described operation is performed, contact your technical represen tative.
Troubleshooting 5 bizhub 750/600 5-15 Troubleshooting Chapter 5 5.6 Main Messages and Their Remedies Message Cause Remedy Original left on glass. The document was left on the original glass. Remove the document from the original glass. Matching paper size is not available.
5 Troubleshooting 5-16 bizhub 750/600 Troubleshooting Chapter 5 If any message other than those li sted above appears, perform the operation described in the message. If the problem is not corrected after the described operation is performed, contact your technical represen tative.
6 Specifications Chapter 6 Specifications.
6 Specifications 6-2 bizhub 750/600 Specifications Chapter 6 6 Specifications 6.1 Specif ications bizhub 750/600 Specifications Type Console Document holder Stationary Photoconductor OPC Luminous sour.
Specifications 6 bizhub 750/600 6-3 Specifications Chapter 6 *1 There are four F4 (Foolscap) sizes: 8-1/4 × 13 w , 8-1/8 × 13-1/4 w , 8- 1/2 × 13 w and 8 × 13 w . Any one of these sizes can be selected. For details, contact your technica l representative.
6 Specifications 6-4 bizhub 750/600 Specifications Chapter 6 Table 1: Possible combinations for mixed document sizes o : Possible —: Not possible Document sizes Single-si ded/double-sided documents: 11 × 17 w to 5-1/2 × 8-1/2 w / v and 8-1/2 × 14 w Mixed document sizes: Refer to Table 1.
Specifications 6 bizhub 750/600 6-5 Specifications Chapter 6 Option Specifications Large Capacity Tray LU-401 Large Capacity Tray LU-402 *1 There are four F4 (Foolscap) sizes: 8-1/4 × 13 w , 8-1/8 × 13-1/4 w , 8- 1/2 × 13 w and 8 × 13 w . Any one of these sizes can be selected.
6 Specifications 6-6 bizhub 750/600 Specifications Chapter 6 Finisher FS-504 Finisher FS-602 Specifications Exit trays Main tray, sub tray Settings Non-stapled, Offset, St aple Paper types Main tray: .
Specifications 6 bizhub 750/600 6-7 Specifications Chapter 6 Punch Kit PK-505 Paper types Main tray: “Sort” and “Group” settings: Normal paper (16 to 24 lb), thick paper (24-1/4 to 53-1/4 lb),.
6 Specifications 6-8 bizhub 750/600 Specifications Chapter 6 Z-Folding Unit ZU-602 Cover Sheet Feeder PI-501 Shift Tray SF-601 Dimensions 5 in. (W) × 18-1/2 i n.
Specifications 6 bizhub 750/600 6-9 Specifications Chapter 6 Accessories Paper capacity 500 sheets of 8-1/2 × 14-size paper or larger, 1, 250 sheets of 8-1/2 × 11- size paper, or 100 sheets of 5-1/2 × 8-1/2-size pa- per or smaller Amount of shift 1-1/4 in.
.
7 Copy Paper/Original Chapter 7 Copy Paper/Original.
7 Copy Paper/Original 7-2 bizhub 750/600 Copy Paper/Original Chapter 7 7 Copy Paper/Original 7.1 Copy Paper Use paper that meets the following specificat ions. Possible Paper Sizes Custom-sized paper: Standard-sized paper: Paper Source Paper Width Paper Length Bypass tray 3-15/16 in.
Copy Paper/Original 7 bizhub 750/600 7-3 Copy Paper/Original Chapter 7 * 1 Any of the following paper sizes can be selected from the Administrator Settings screen. (Refer to page 12-26.) - A4 w or 8-1/2 × 11 w - A5 v or 5-1/2 × 8-1/2 v - 8-1/2 × 14 or F4 Select one size from the four F4 sizes available.
7 Copy Paper/Original 7-4 bizhub 750/600 Copy Paper/Original Chapter 7 Special Paper Paper other than Normal paper, such as overhead projector transparencies and colored paper, is called special paper.
Copy Paper/Original 7 bizhub 750/600 7-5 Copy Paper/Original Chapter 7 Recycled Select this setting when recycled paper is loaded. A paper tray with this setting is n ot automatic ally se- lected when the “Auto Paper Select” setting is spec- ified or when the paper trays are switched automatically.
7 Copy Paper/Original 7-6 bizhub 750/600 Copy Paper/Original Chapter 7 Precautions for Paper The following types of paper should not be used, otherwise decreased print quality, paper misfeeds or damage to the machine may occur .
Copy Paper/Original 7 bizhub 750/600 7-7 Copy Paper/Original Chapter 7 Automatic Tray Switching Feature If the selected paper tray runs out of paper while a job is being printed and a different paper tray is loaded with paper meeting the following conditions, the other paper tray is automatically selected so printing can continue.
7 Copy Paper/Original 7-8 bizhub 750/600 Copy Paper/Original Chapter 7 7.2 Specifying the Paper Setting for the Bypass Tray This section describes the procedures for specifying the size and type of pa- per loaded in the bypass tray.
Copy Paper/Original 7 bizhub 750/600 7-9 Copy Paper/Original Chapter 7 3 Touch [Auto Detect]. 4 Touch [OK] twice. The Basic screen appears again. 2 Note The factory defaul t setting is “Auto Detect”.
7 Copy Paper/Original 7-10 bizhub 750/600 Copy Paper/Original Chapter 7 To specify a paper size (Standard Size settings) Specify the Paper setting for the bypass tray if the size cannot be detected automaticall y.
Copy Paper/Original 7 bizhub 750/600 7-11 Copy Paper/Original Chapter 7 3 Touch [Standard Size]. The Standard Size screen appears. 4 Touch [A4 w ]. 5 Touch [OK] three time s.
7 Copy Paper/Original 7-12 bizhub 750/600 Copy Paper/Original Chapter 7 To specify a non-standard paper size (Custom Size settings) If non-standard-sized paper is loaded into the bypass tray, it will be neces- sary to specify the paper size. 1 In the Basic screen, touc h [Paper].
Copy Paper/Original 7 bizhub 750/600 7-13 Copy Paper/Original Chapter 7 4 Type in the length (X) and width (Y) of the paper. – Touch [X], touch [ ↔ ] to switch between the integer and the fraction, and then touch [–] and [+] to type in the length of side X.
7 Copy Paper/Original 7-14 bizhub 750/600 Copy Paper/Original Chapter 7 To store a non-standard pap er size (Custom Size s ettings Store) Two non-standard paper sizes can be stored. Storing paper sizes that are used often allows the paper size to be quickly selected, without having to re-enter the setting.
Copy Paper/Original 7 bizhub 750/600 7-15 Copy Paper/Original Chapter 7 4 Specify the X and Y sides of the paper, and then touch [Store] . – Touch [X], touch [ ↔ ] to switch between the integer and the fraction and then touch [–] and [+] to type in the length of side X.
7 Copy Paper/Original 7-16 bizhub 750/600 Copy Paper/Original Chapter 7 % For details on typing in text, refer to “Entering Text” on page 13-2. 6 Touch [OK] four times.
Copy Paper/Original 7 bizhub 750/600 7-17 Copy Paper/Original Chapter 7 To select a setting for oversize d paper (Oversized Paper settings) If oversized paper is loaded into the bypass tray, it will be necessary to spec- ify the paper size.
7 Copy Paper/Original 7-18 bizhub 750/600 Copy Paper/Original Chapter 7 3 Touch [Oversized Paper]. The Oversized Paper screen appe ars. 4 Select the size of the paper to be loaded and image adjustment. – To select a paper size in centimeters, t ouch [Metric].
Copy Paper/Original 7 bizhub 750/600 7-19 Copy Paper/Original Chapter 7 6 Specify the length (X) and width (Y) of the p aper, and then touch [OK]. – Touch [X] or [Y], touch [ ↔ ] to switch between the integer and the fraction, and then touc h [–] and [+] to specify the size of the paper.
7 Copy Paper/Original 7-20 bizhub 750/600 Copy Paper/Original Chapter 7 To specify a setting for special paper If a setting for special paper, such as overhead projector tr ansparencies and other spec.
Copy Paper/Original 7 bizhub 750/600 7-21 Copy Paper/Original Chapter 7 3 Specify the appropriate setting for the type of special paper loaded. – Touch the button for the desired special paper.
7 Copy Paper/Original 7-22 bizhub 750/600 Copy Paper/Original Chapter 7 7.3 Specifying Paper Settings for Paper Trays This section describes the procedures for specifying the size of paper loaded in the tray 3 and 4 and the type of paper loaded in each paper tray.
Copy Paper/Original 7 bizhub 750/600 7-23 Copy Paper/Original Chapter 7 3 Touch [1 System Setting]. – To quit specifying the U tility mode setting, touch [Exit] in the sub display area or press the [Utility/Counter] key.
7 Copy Paper/Original 7-24 bizhub 750/600 Copy Paper/Original Chapter 7 To specify a standard paper size (Standard Size 1 settings) A standard paper size can be set for the tray 3 and 4. The following procedure describes how to specify the setting for standard- sized paper loaded into the tray 3.
Copy Paper/Original 7 bizhub 750/600 7-25 Copy Paper/Original Chapter 7 3 Touch [Standard Size 1]. – The Paper Size screen that appears differs depending on the paper size type that is selected. 4 Touch [OK]. If standard-sized paper is loaded into a paper tray, the paper size is au- tomatically detected.
7 Copy Paper/Original 7-26 bizhub 750/600 Copy Paper/Original Chapter 7 2 Touch the button f or the tray 3, and then touch [Paper Size]. The Paper Size screen appears. 3 Touch [Standard Size2]. – The Paper Size screen that appears differs depending on the paper size type that is selected.
Copy Paper/Original 7 bizhub 750/600 7-27 Copy Paper/Original Chapter 7 To specify a non-standard paper size (Custom Size settings) If custom-sized paper is being used in th e tray 3 and 4, specify a setting f or custom-sized paper. The following procedure describes how to specify the setting for custom- sized paper loaded into the tray 3.
7 Copy Paper/Original 7-28 bizhub 750/600 Copy Paper/Original Chapter 7 3 Touch [Custom Size]. – The Paper Size screen that appears differs depending on the paper size type that is selected.
Copy Paper/Original 7 bizhub 750/600 7-29 Copy Paper/Original Chapter 7 To select a setting for oversize d paper (Oversized Paper settings) If paper larger than a standard size is being used in the tray 3 and 4, specify a setting for oversized paper.
7 Copy Paper/Original 7-30 bizhub 750/600 Copy Paper/Original Chapter 7 3 Touch [Oversized Paper]. – The Paper Size screen that appears differs depending on the paper size type that is selected. Buttons for the available paper sizes appear. 4 Select the size of the paper to be loaded.
Copy Paper/Original 7 bizhub 750/600 7-31 Copy Paper/Original Chapter 7 To specify a paper type A setting can be specified for the type of paper loaded into the tray 1, 2, 3 and 4 and the LCT (LU-401/LU-402). The following procedure describes how to specify the setting for the type of paper loaded into the tray 1.
7 Copy Paper/Original 7-32 bizhub 750/600 Copy Paper/Original Chapter 7 3 Select the type of paper to be loaded. 4 Touch [OK]..
Copy Paper/Original 7 bizhub 750/600 7-33 Copy Paper/Original Chapter 7 7.4 Origi nals When making copies, position the original in to the ADF or on the original glass. To copy original that cannot be positioned into the ADF, position them on t he original glass.
7 Copy Paper/Original 7-34 bizhub 750/600 Copy Paper/Original Chapter 7 Mixed originals paper sizes The following chart shows the possible combinations of standard-sized pa- per that can be used with the “Mixed Original” setting.
Copy Paper/Original 7 bizhub 750/600 7-35 Copy Paper/Original Chapter 7 Precautions for Positioning Original into the ADF The following types of original should not be positioned into the ADF, other- wise paper misfeeds or damage to the original may occur.
7 Copy Paper/Original 7-36 bizhub 750/600 Copy Paper/Original Chapter 7 Precautions for Positioning Original on the Original Glass Observe the following precautions when placing the original on the original glass. - The size of original printed on paper in metric sizes (such as A3 , B4, A4) cannot be automatically detected.
8 Application Functions Chapter 8 Application Functions.
8 Application Functions 8-2 bizhub 750/600 Application Functions Chapter 8 8 Application Functions 8.1 Inserting Paper Between Overhead Projector Trans- parencies (“OHP Interleave” Function) In or.
Application Functions 8 bizhub 750/600 8-3 Application Functions Chapter 8 To copy using the “OHP Interleave” function 0 Finishing settings, such as the Staple, Punch and Folding settings, can- not be used. The copies are fed in to the m ain tray of optional finisher FS- 504/FS-602.
8 Application Functions 8-4 bizhub 750/600 Application Functions Chapter 8 5 Load paper of the same size as the overhead projector transparencies into a paper tray other than the bypass tray.
Application Functions 8 bizhub 750/600 8-5 Application Functions Chapter 8 8 Touch [OHP Interleave ]. The OHP Interleave screen appears. 9 Select the paper tray loaded with th e interleaf paper. – To cancel changes to the settings, touch [Cancel]. – To cancel the “OHP Interleave” function, touch [OFF].
8 Application Functions 8-6 bizhub 750/600 Application Functions Chapter 8 8.2 Inserting Copies of a Different Original at a Specified Location (“Insert Image” Function) Multiple images later scanned from the origi nal glass can be inserted at t he specified locations in an original first scanned with the ADF.
Application Functions 8 bizhub 750/600 8-7 Application Functions Chapter 8 ! Detail Images can be inserted at a maximum of 30 locations within an original of up to 999 pages. For details on positioning the original, refer to “Positioning the Original” on page 3-7.
8 Application Functions 8-8 bizhub 750/600 Application Functions Chapter 8 To copy using the “Insert Image” function 1 Load the main original (the one that the other original will be inserted into) into the ADF. 2 Touch [Application]. The Application screen appears.
Application Functions 8 bizhub 750/600 8-9 Application Functions Chapter 8 5 Touch the buttons for the insert position setting. – To cancel changes to the settings, touch [Cancel]. – To cancel the “Insert Image” function, tou ch [OFF]. 6 Using the keypad, specify the pages where the image is to be inserted.
8 Application Functions 8-10 bizhub 750/600 Application Functions Chapter 8 ? What will happen if there are fewer insertion pages than the number of pages that are specified? % Nothing is inserted after the excess specified p age numbers.
Application Functions 8 bizhub 750/600 8-11 Application Functions Chapter 8 13 Touch [Finish]. 14 Press the [Start] key. Printing begins..
8 Application Functions 8-12 bizhub 750/600 Application Functions Chapter 8 8.3 Adding Cover Pages (“Cover Mode” Function) Copies can be made using paper different from the cover pag es and main body of the document (excluding the cover pages) and cover pages can be added using paper different from the copy.
Application Functions 8 bizhub 750/600 8-13 Application Functions Chapter 8 To copy using the “Cover Mode” function 1 Position the original to be copied. – For details on positioning the original, refer to “Positioning the Orig- inal” on page 3-7.
8 Application Functions 8-14 bizhub 750/600 Application Functions Chapter 8 5 Touch [Cover Mode]. The Cover Mode screen appears. 6 Select the desired cover sheet format. – The default setting for the paper tray loaded with cover pages can be specified from the Utility mode.
Application Functions 8 bizhub 750/600 8-15 Application Functions Chapter 8 8 Select the paper tray loaded with the paper for the cover pages. – Optional paper trays (F1 and F2) appear only if optional cover sheet feeder PI-501 is i nstalled.
8 Application Functions 8-16 bizhub 750/600 Application Functions Chapter 8 8.4 Inserting Cover Pages (“Insert Sheet” Function) Paper different from the copy is used to add insertions at the specified loca- tions. There are settings (“Copy” and “Blank”) for selecting whether or not the in- serted pages are printed.
Application Functions 8 bizhub 750/600 8-17 Application Functions Chapter 8 ! Detail The insertion can be added at a maximum of 30 locations within an orig- inal of up to 999 pages. For details on positioning the original, refer to “Positioning the Original” on page 3-7.
8 Application Functions 8-18 bizhub 750/600 Application Functions Chapter 8 To copy using the “Insert Sheet” function 1 Position the original to be copied. 2 Load the paper to be used as the insertion into the desired paper tray. Load the paper for copying the original into a different paper tray.
Application Functions 8 bizhub 750/600 8-19 Application Functions Chapter 8 5 Touch [Insert Sheet]. The Insert Sheet screen (for specifying settings) appears. 6 Touch [Insert Paper]. – To cancel changes to th e copy settings, Touch [Cancel]. – To cancel the “Insert Sheet” function, Touch [OFF].
8 Application Functions 8-20 bizhub 750/600 Application Functions Chapter 8 9 Under Insert Type, touch either [Copy] or [Blank]. – To insert a copy page at the specified location, touch [Copy]. – To insert a blank page at the specified location, touch [Blank].
Application Functions 8 bizhub 750/600 8-21 Application Functions Chapter 8 ? Do the page numbers have to entered st arting with the smallest number? % It is not necessary.
8 Application Functions 8-22 bizhub 750/600 Application Functions Chapter 8 8.5 Specifying Pages To Be Printed on the Front Side (“Chapters” Function) This function is used to specify pages that will be printed on the front side the paper when making double-sided copied.
Application Functions 8 bizhub 750/600 8-23 Application Functions Chapter 8 ! Detail A maximum of 30 p ages can be specified to be printed on the front side of the paper within an original of up to 999 pages. When the “Chapters” function is set, t he “1 > 2” Simplex/Dupl ex setting is automatically selected.
8 Application Functions 8-24 bizhub 750/600 Application Functions Chapter 8 To copy using the “Chapters” function 1 Position the original to be copied. 2 Touch [Application]. The Application screen appears. 3 Touch [Sheet/Cover/Chapter Insert]. The Sheet/Cover/Chapter Insert screen appears.
Application Functions 8 bizhub 750/600 8-25 Application Functions Chapter 8 5 Under “Chapter Paper”, specify the paper tray loaded with paper for the first page of the chapters. – If “Copy Insert” was selected, the paper tr ay loaded with paper for the first page of chapters ca n be selected.
8 Application Functions 8-26 bizhub 750/600 Application Functions Chapter 8 8 Touch [OK]. The Chapters screen (for specifying settings) appears again. 9 Touch the buttons for the chapter position setting. 10 Using the keypad, specify the chapter title pages.
Application Functions 8 bizhub 750/600 8-27 Application Functions Chapter 8 ? What will happen if the same page number is specified twice? % There is no change to the pri nt re sult since the specified page is th e same.
8 Application Functions 8-28 bizhub 750/600 Application Functions Chapter 8 8.6 Copying With Image Colors Inversed (“Neg-/Pos. Re- verse” Function) An original can be copied with the light and dark coloring or the black and white coloring (gradations) of the image inversed.
Application Functions 8 bizhub 750/600 8-29 Application Functions Chapter 8 3 Touch [Neg-/Pos. Reverse]. – To cancel the “Neg-/Pos. Reverse” function, Touch [Neg-/Pos. Re- verse] again to deselect it. – To cancel all settings for the Applic ation function s, touch [Reset].
8 Application Functions 8-30 bizhub 750/600 Application Functions Chapter 8 8.7 Producing Separate Copies of Each Page in a Page Spread (“Book Copy” Function) A page spread, such as in an open book or catalog, can be copied with the left and right pages on separate pages or both on the same p age.
Application Functions 8 bizhub 750/600 8-31 Application Functions Chapter 8 When “Front Cover” is selected When “Front and Back Cover” is selected SURVEYOR’S REPORT SURVEYOR’S REPORT SURVE.
8 Application Functions 8-32 bizhub 750/600 Application Functions Chapter 8 To copy using the “Book Copy” function 0 Place the original on the original glass. 1 Place the pages on the original glass, starting with the first page. – For details on positioning the original, refer to “Positioning the Orig- inal” on page 3-7.
Application Functions 8 bizhub 750/600 8-33 Application Functions Chapter 8 4 Touch [Book Copy/Repeat]. – To cancel all settings for the Applic ation function s, touch [Reset]. The Book Copy/Repeat screen appe ars. 5 Touch [Book Copy]. The Book Scanning screen appears.
8 Application Functions 8-34 bizhub 750/600 Application Functions Chapter 8 – Touch [ ↔ ] to switch between the integer and the fraction, touch [–] and [+] to specify the width to be erased, and then touch [OK]. – If a decimal value is displayed in the screen, use the keypad to type in the setting.
Application Functions 8 bizhub 750/600 8-35 Application Functions Chapter 8 ? How are settings specified for the “Center Erase” function? % Refer to “To erase the center of copies (“Center Erase” fun ction)” on page 8-73. 7 Touch [OK], and then touch [OK] in the next screen that appears.
8 Application Functions 8-36 bizhub 750/600 Application Functions Chapter 8 11 Press the [Start] key. – If “Front and Back Cover” was selected, the back cover is scanned after the front cover, and then all page spre ads are scanned in or- der.
Application Functions 8 bizhub 750/600 8-37 Application Functions Chapter 8 12 After all original pages have been scanned, touch [Finish]. 13 Press the [Start] key.
8 Application Functions 8-38 bizhub 750/600 Application Functions Chapter 8 8.8 Repeating the Copy Image on a Sheet of Paper (“Im- age Repeat” Function) Multiple copies of the specified scan ned area can be printed on a single sheet of paper.
Application Functions 8 bizhub 750/600 8-39 Application Functions Chapter 8 “With Margin” setting “Without Margin” setting Original Original Original Original 2 Repeat 4 Repeat 8 Repeat.
8 Application Functions 8-40 bizhub 750/600 Application Functions Chapter 8 To automatically detect the scanning area (“Auto Original Size Detect”) 1 Position the original to be copied. – For details on positioning the original, refer to “Positioning the Orig- inal” on page 3-7.
Application Functions 8 bizhub 750/600 8-41 Application Functions Chapter 8 5 Touch [Image Repeat]. The Image Repeat screen appears. 6 Select the layout method. 7 Touch [Auto Detect]. – If you wish to specify the scanning area, touch [Set Range], and then specify the size of the scanning area.
8 Application Functions 8-42 bizhub 750/600 Application Functions Chapter 8 9 In the Basic screen, touc h [Paper], and then select th e paper tray load- ed with the paper . 10 If necessary, specify any other copy settings. 11 Using the keypad, type in the desired number of copies.
Application Functions 8 bizhub 750/600 8-43 Application Functions Chapter 8 To repeat the specified area (“Set Range”) The specified number of co pies of the specified ar ea can be printed on a sin- gle sheet of paper. 1 Position the original to be copied.
8 Application Functions 8-44 bizhub 750/600 Application Functions Chapter 8 5 Touch [Image Repeat]. The Image Repeat screen appears. 6 Select the layout method. – To cancel changes to th e settings, touch [Cancel]. – To cancel the “Image Repeat” function, touch [OFF].
Application Functions 8 bizhub 750/600 8-45 Application Functions Chapter 8 7 Touch [Set Range], and t hen specify the scanning area. – Touch [ ] or [ ] to display a different list of sizes. – If [Custom Size] is touched, the Custom Size screen appears.
8 Application Functions 8-46 bizhub 750/600 Application Functions Chapter 8 9 In the Basic screen, touc h [Paper], and then select th e paper tray load- ed with the paper .
Application Functions 8 bizhub 750/600 8-47 Application Functions Chapter 8 To repeat the image the specified number of times (“Repeat”) The number of times that the image is repeated can be selected. The following procedure describes how to specify settings when “Repeat” is selected.
8 Application Functions 8-48 bizhub 750/600 Application Functions Chapter 8 5 Touch [Image Repeat]. The Image Repeat screen appears. 6 Select the layout method. – To cancel changes to th e settings, touch [Cancel]. – To cancel the “Image Repeat” function, touch [OFF].
Application Functions 8 bizhub 750/600 8-49 Application Functions Chapter 8 9 Touch the button for the desired number of repeats. – 2 Repeat: Two copies of the origi nal are printed on a single sheet of paper. Specify the desired setting for “Repeat Interval Setting” to specify the distance from the center of the pa per to each copy im- age.
8 Application Functions 8-50 bizhub 750/600 Application Functions Chapter 8 – When using the keypad to specify the settings, press the [C] (clear) key, and then type in the setting. If a value outside the allowable range is specified, the message “In- put Error” appears.
Application Functions 8 bizhub 750/600 8-51 Application Functions Chapter 8 8.9 Copying an Original on Two Pages (“Booklet Pagina- tion” Function) A page spread can be copied on separate left and right pages. With single-sided copies, the pages ar e printed on two sheets of paper.
8 Application Functions 8-52 bizhub 750/600 Application Functions Chapter 8 To copy using the “Booklet Pagination” function 1 Position the original into the ADF. – For details on scanning the original , refer to “To position the original into the ADF” on page 3-7.
Application Functions 8 bizhub 750/600 8-53 Application Functions Chapter 8 4 Touch [Booklet Pagination]. The Booklet Pagination screen appears. 5 Specifying binding position. – To cancel changes to the settings, touch [Cancel]. – To cancel the “Booklet Pagination” function, touch [OFF].
8 Application Functions 8-54 bizhub 750/600 Application Functions Chapter 8 8.10 Adding Filing Margins to Copies (“Page Margin” Function) Copies can be printed with a filing margin so that the pages can easily be filed. When making double -sided copies, the image orienta tion can be ad- justed by specifying the position of the filing margin.
Application Functions 8 bizhub 750/600 8-55 Application Functions Chapter 8 To copy using the “Page Margin ” function 1 Position the original to be copied. – For details on positioning the original, refer to “Positioning the Orig- inal” on page 3-7.
8 Application Functions 8-56 bizhub 750/600 Application Functions Chapter 8 – To cancel changes to th e settings, touch [Cancel]. – To cancel the “Page Margin” function, touch [OFF]. – As a factory default, the margin positi on is set to “Auto”, an d the margin width is set to “None”.
Application Functions 8 bizhub 750/600 8-57 Application Functions Chapter 8 To adjust the position of the bind ing margin (“Edit Margin” setting) A binding margin can be created in the copy by moving the position of the scanned image.
8 Application Functions 8-58 bizhub 750/600 Application Functions Chapter 8 4 In the Page Margin screen, touch [Edit Margin]. To cancel changes to the settings, t ouch [Cancel]. – To cancel the “Page Margin” function, touch [OFF]. The Edit Margin screen appears.
Application Functions 8 bizhub 750/600 8-59 Application Functions Chapter 8 – To specify no shift either horizontally or vertically, touch [N o Shift]. Specify the horizontal (left and right shift) or vertical (up and down shift) shift. 6 Touch [Edit 2nd Side].
8 Application Functions 8-60 bizhub 750/600 Application Functions Chapter 8 – If a binding margin is not specified for the back side, a shift amount and a shift direction opposite that specified for the front side are specified. 8 Touch [OK] three time s.
Application Functions 8 bizhub 750/600 8-61 Application Functions Chapter 8 8.11 Adjusting the Image To Fit the Paper (Image Adjust- ment Settings) The position of the copy image can be ad justed in order to print the copi es. The following Image Adjustment settings are available an d can be combined.
8 Application Functions 8-62 bizhub 750/600 Application Functions Chapter 8 “ Centering” selected “No Rotate” selected Normal copy “Full Scan” selected.
Application Functions 8 bizhub 750/600 8-63 Application Functions Chapter 8 To copy using the Image Adjustment settings 1 Position the original to be copied. – For details on positioning the original, refer to “Positioning the Orig- inal” on page 3-7.
8 Application Functions 8-64 bizhub 750/600 Application Functions Chapter 8 4 Select the desired Image Adjustment setting. – The factory defaul t setting is [Auto Detect]. – To cancel changes to th e settings, touch [Cancel]. – To cancel a setting touch the button for a setting different from the currently selected setting.
Application Functions 8 bizhub 750/600 8-65 Application Functions Chapter 8 ? Can sizes in metric be displayed? % Touch [ ] or [ ] to display a different list of sizes. If [Custom Size] is touched, the Custom Size screen appears. ? Can any size be specified? % Any size can be specified from the Custom Size screen.
8 Application Functions 8-66 bizhub 750/600 Application Functions Chapter 8 8.12 Copying Booklet Original (“Booklet” Function) Double-sided copies of the original pages are arranged so that the page cop- ies can be read like a bound book when it is folded in half.
Application Functions 8 bizhub 750/600 8-67 Application Functions Chapter 8 To copy using the “Booklet” function 1 Position the original to be copied. – For details on positioning the document, refer to “Positioning the Original” on page 3-7.
8 Application Functions 8-68 bizhub 750/600 Application Functions Chapter 8 5 Touch [Left Bind] or [Right Bind]. 6 Touch [OK]. 7 If necessary, specify any other copy settings. 8 Using the keypad, type in the desired number of copies. 9 Press the [Start] key.
Application Functions 8 bizhub 750/600 8-69 Application Functions Chapter 8 8.13 Erasing Specified Areas of Copies (“Erase” Functions) Copies can be produced by erasing unwan ted areas around the original, such as the folds in the origi nal or the shadows of punched holes.
8 Application Functions 8-70 bizhub 750/600 Application Functions Chapter 8 To erase specified areas of copies (“Erase” function) By using the “Erase” function, the unwanted areas around the original can be erased.
Application Functions 8 bizhub 750/600 8-71 Application Functions Chapter 8 4 Touch [Erase]. The Erase screen appears. 5 Specify the area to be erased.
8 Application Functions 8-72 bizhub 750/600 Application Functions Chapter 8 – If a decimal value is displayed in the screen, press the [C] (clear) key, and then use the keypad to type in the setting. For details on switching between decimal and fraction values, refer to “System Setting” on page 12-14.
Application Functions 8 bizhub 750/600 8-73 Application Functions Chapter 8 To erase the center of copies (“Center Erase” function) With the “Center Erase” function, the Half-fold of an original or the shadow of the binding can be erased. 0 The copy settings previously specified remain selected.
8 Application Functions 8-74 bizhub 750/600 Application Functions Chapter 8 4 Touch [Center Erase]. The Center Erase screen appears. 5 Touch [–] and [+] or use the keypad to spe cify the width to be erased.
Application Functions 8 bizhub 750/600 8-75 Application Functions Chapter 8 9 Press the [Start] key. To erase specified areas of copies (“Non-Image Area Erase” function) The size of the original placed on the original glass is detected, and any area not part of the original is erased.
8 Application Functions 8-76 bizhub 750/600 Application Functions Chapter 8 4 Touch [Non-Image Area Erase]. – To cancel the “Non-Image Area Erase” function, touch [Non-Image Area Erase] again to deselect it. 5 Touch [OK]. 6 If necessary, specify any other copy settings.
Application Functions 8 bizhub 750/600 8-77 Application Functions Chapter 8 8.14 Printing the Date/Time, Page Number or Distribution Number on Copies (Stamp/Overlay Functions) The date/time or page number can be added to copies at the specified loca- tion, or a distribution number can be added when multiple copies are made.
8 Application Functions 8-78 bizhub 750/600 Application Functions Chapter 8 0001 0001 0001 0001 0001 0001 0001 0001 ‘05/1/23 Date/Time 1:23PM P1 Page # URGENT Print Position Set Numbering Built-in S.
Application Functions 8 bizhub 750/600 8-79 Application Functions Chapter 8 To display the Stamp/Overlay screen 1 Position the original to be copied. – For details on positioning the original, refer to “Positioning the Orig- inal” on page 3-7. 2 Touch [Application].
8 Application Functions 8-80 bizhub 750/600 Application Functions Chapter 8 4 Select the desired Stamp function. – The Stamp functions can be used together.
Application Functions 8 bizhub 750/600 8-81 Application Functions Chapter 8 Printing the Date/Time (“Date/Time” function) To copy using the “Date/Time” function 1 In the Stamp/Overlay screen, touch [Da te/Time]. – For details on displaying the Stamp /Overlay screen, refer to“To dis- play the Stamp/Overlay screen” on page 8-79.
8 Application Functions 8-82 bizhub 750/600 Application Functions Chapter 8 3 Touch [Print Position], and then select the printing position. – To make fine adjustments to th e printing posi tion, continue with step 4. – To not make fine adjustments, skip to step 6.
Application Functions 8 bizhub 750/600 8-83 Application Functions Chapter 8 – If a value outside the a llowable range is specified, the message “In- put Error” appears. If “Input Error” appeared or if the adjustment value was incorrectly entered, touch [No Adj.
8 Application Functions 8-84 bizhub 750/600 Application Functions Chapter 8 2 Under “Start No.”, touch either [Page #] or [Chapter]. – Using the keypad, type in the starting pa ge number. – The setting for “Start No.” can be set to a number between -99 999 and 99999.
Application Functions 8 bizhub 750/600 8-85 Application Functions Chapter 8 4 Touch [Insert Sheet Setting]. – To print the page number on all pages, including the front and back cover pages, touch [All Pages] under “Cover Mode”.
8 Application Functions 8-86 bizhub 750/600 Application Functions Chapter 8 6 Touch [Print Position]. The Print Position screen appears. 7 Select the printing position. – To make fine adjustments to th e printing posi tion, continue with step 8. – To not make fine adjustments, skip to step 10.
Application Functions 8 bizhub 750/600 8-87 Application Functions Chapter 8 – If a value outside the a llowable range is specified, the message “In- put Error” appears. If “Input Error” appeared or if the distance was incorrectly entered, press the [C] (clear) key to era se the valu e, and then specify the correct value.
8 Application Functions 8-88 bizhub 750/600 Application Functions Chapter 8 Printing the Distribution Number (“Set Numbering” fun ction) ! Detail The distribution number is normally printed as a four-digit number. If “Start Number” is set to “1”, “0001” is printed.
Application Functions 8 bizhub 750/600 8-89 Application Functions Chapter 8 3 Touch a button under “Text Density” and “Pages” to specify the de- sired settings. 4 Touch [OK] twice. 5 If necessary, specify any other copy settings. 6 Using the keypad, type in the desired number of copies.
8 Application Functions 8-90 bizhub 750/600 Application Functions Chapter 8 Printing the built-in stamp (“Built-In Stamp” funct ion) To copy using the “Built-in stamp” function 1 In the Stamp/Overlay screen, touch [Built-In Stamp].
Application Functions 8 bizhub 750/600 8-91 Application Functions Chapter 8 3 Touch [Print Position], and then select the printing position. – To make fine adjustments to th e printi ng position, continue with step 4. – To not make fine adjustments, skip to step 6.
8 Application Functions 8-92 bizhub 750/600 Application Functions Chapter 8 Printing the preset text at the center of the copy image (“Watermark” function) To copy using the “Watermark” function 1 In the Stamp/Overlay screen, touch [Watermar k].
9 Replacing Toner Cart ridges and Staples and Emptying Dust Boxes Chapter 9 Replacing Toner Cartridges and Staples and Emptying Dust Boxes.
9 Replacing Toner Cartridges and Staples and Emptying Dust Boxes 9-2 bizhub 750/600 Replacing Toner Cart ridges and Staples and Emptying Dust Boxes Chapter 9 9 Replacing Toner Cartridges and Staples and Emptying Dust Boxes 9.1 Replacing the Toner Cartridge When the toner is about to run out, the warning message shown below ap- pears.
Replacing Toner Cartridges and Staples and Emptying Dust Boxes 9 bizhub 750/600 9-3 Replacing Toner Cart ridges and Staples and Emptying Dust Boxes Chapter 9 ! Detail For details on replacing the toner cartridges, refer to “To replace the toner cartridge” on page 9-4.
9 Replacing Toner Cartridges and Staples and Emptying Dust Boxes 9-4 bizhub 750/600 Replacing Toner Cart ridges and Staples and Emptying Dust Boxes Chapter 9 7 7 7 7 CAUTION Precautions for toner spills % Be careful not to spill toner inside th e machine or get toner on your clothes or hands.
Replacing Toner Cartridges and Staples and Emptying Dust Boxes 9 bizhub 750/600 9-5 Replacing Toner Cart ridges and Staples and Emptying Dust Boxes Chapter 9 3 Pull up the used toner cartrid ge to remove it. 4 Shake the new toner cartridge by turning it over about five times.
9 Replacing Toner Cartridges and Staples and Emptying Dust Boxes 9-6 bizhub 750/600 Replacing Toner Cart ridges and Staples and Emptying Dust Boxes Chapter 9 6 Install the toner cartridge, making sure that it is correctly oriented.
Replacing Toner Cartridges and Staples and Emptying Dust Boxes 9 bizhub 750/600 9-7 Replacing Toner Cart ridges and Staples and Emptying Dust Boxes Chapter 9 9.2 Replacing the Staples When finisher FS-504/FS-6 02 is installed and is about to run out of staples, the message shown below appears.
9 Replacing Toner Cartridges and Staples and Emptying Dust Boxes 9-8 bizhub 750/600 Replacing Toner Cart ridges and Staples and Emptying Dust Boxes Chapter 9 ! Detail Be sure to replace the staple cartridge only after the message appears, otherwise the machine may be damaged.
Replacing Toner Cartridges and Staples and Emptying Dust Boxes 9 bizhub 750/600 9-9 Replacing Toner Cart ridges and Staples and Emptying Dust Boxes Chapter 9 3 Remove the empty staple cartridge from the staple cartridge holder. – Hold the lever on the staple cartridge, and then pull the car- tridge down to re- move it.
9 Replacing Toner Cartridges and Staples and Emptying Dust Boxes 9-10 bizhub 750/600 Replacing Toner Cart ridges and Staples and Emptying Dust Boxes Chapter 9 6 Close the finisher door.
Replacing Toner Cartridges and Staples and Emptying Dust Boxes 9 bizhub 750/600 9-11 Replacing Toner Cart ridges and Staples and Emptying Dust Boxes Chapter 9 To replace the staple cartridge for finisher FS-602 1 Open the finisher door. 2 Pull out the stacker unit.
9 Replacing Toner Cartridges and Staples and Emptying Dust Boxes 9-12 bizhub 750/600 Replacing Toner Cart ridges and Staples and Emptying Dust Boxes Chapter 9 3 Remove the staple ca rtridge. – While lifting the lever on the staple car- tridge, pull the car- tridge toward you to remove it.
Replacing Toner Cartridges and Staples and Emptying Dust Boxes 9 bizhub 750/600 9-13 Replacing Toner Cart ridges and Staples and Emptying Dust Boxes Chapter 9 5 Load the new cartridge case into the staple car- tridge.
9 Replacing Toner Cartridges and Staples and Emptying Dust Boxes 9-14 bizhub 750/600 Replacing Toner Cart ridges and Staples and Emptying Dust Boxes Chapter 9 7 Return the stacker unit to its original position.
Replacing Toner Cartridges and Staples and Emptying Dust Boxes 9 bizhub 750/600 9-15 Replacing Toner Cart ridges and Staples and Emptying Dust Boxes Chapter 9 9.
9 Replacing Toner Cartridges and Staples and Emptying Dust Boxes 9-16 bizhub 750/600 Replacing Toner Cart ridges and Staples and Emptying Dust Boxes Chapter 9 1 Open the finisher door.
Replacing Toner Cartridges and Staples and Emptying Dust Boxes 9 bizhub 750/600 9-17 Replacing Toner Cart ridges and Staples and Emptying Dust Boxes Chapter 9 4 Install the punch du st box into its original posi- tion.
9 Replacing Toner Cartridges and Staples and Emptying Dust Boxes 9-18 bizhub 750/600 Replacing Toner Cart ridges and Staples and Emptying Dust Boxes Chapter 9 Display in Enlarge Display Mode 1 Open the finisher door.
Replacing Toner Cartridges and Staples and Emptying Dust Boxes 9 bizhub 750/600 9-19 Replacing Toner Cart ridges and Staples and Emptying Dust Boxes Chapter 9 2 Pull out the punch dust box. 3 Empty the punch dust box. 4 Install the punch du st box into its original posi- tion.
9 Replacing Toner Cartridges and Staples and Emptying Dust Boxes 9-20 bizhub 750/600 Replacing Toner Cart ridges and Staples and Emptying Dust Boxes Chapter 9 5 Close the finisher door.
10 Care of the Machine Chapter 10 Care of the Machine.
10 Care of the Machine 10-2 bizhub 750/600 Care of the Machine Chapter 10 10 Care of the Machine 10.1 Cleaning This section describes the procedures for cleaning each part. Main body % Clean the surfa ce of the main body by wiping it with a soft cloth damp- ened with a mild house- hold detergent.
Care of t he Machine 10 bizhub 750/600 10-3 Care of the Machine Chapter 10 Original Glass % Clean the surfa ce of the original glass by wiping it with a soft, dry cloth. 2 Reminder Never use solvents, such as benzene or thinner, to clean the origina l glass.
10 Care of the Machine 10-4 bizhub 750/600 Care of the Machine Chapter 10 Control Panel % Clean the control panel by wiping it with a soft, dry cloth. 2 Reminder Pressing too hard on the control panel or the touch panel may damage them.
Care of t he Machine 10 bizhub 750/600 10-5 Care of the Machine Chapter 10 Paper Take-Up Roller % Clean the paper take-up rollers by wiping them with a soft, dry cloth. 2 Reminder Never use solvents, su ch as benzene or thinn er, to clean the pa per take- up roller.
10 Care of the Machine 10-6 bizhub 750/600 Care of the Machine Chapter 10 10.2 Viewing Counters (Meter Count) The Meter Count screen can be displayed so that the total num ber of prints since counting started can be viewed. In addition, the list of count ers can be printed.
Care of t he Machine 10 bizhub 750/600 10-7 Care of the Machine Chapter 10 10.3 When the Message “Preventive maintenance time.” Appears If the message “Preventive maint enance time.” appears, contact your tech- nical representative and request a periodic maintenance inspection.
.
11 Managing Jobs (Job L ist) Chapter 11 Managing Jobs (Job List).
11 Managing Jobs (Job List) 11-2 bizhub 750/600 Managing Jobs (Job L ist) Chapter 11 11 Managing Jobs (Job List) 11.1 Overview of the Job List Screen Jobs Specifying the desired copy settings, then pressing the [Start] key queues the copy operation in this machine.
Managing Jobs (Job List) 11 bizhub 750/600 11-3 Managing Jobs (Job L ist) Chapter 11 The screen for each function listed above can be displayed from any other Job List screen. However, if a different tab is selected while a job setting is being changed, that setti ng is canceled.
11 Managing Jobs (Job List) 11-4 bizhub 750/600 Managing Jobs (Job L ist) Chapter 11 Name Description [Print] Displays the Print tab of the Job List sc reen. [Scan] Displays the Scan tab of the Jo b List screen. For more details, refer to the Network scanner volume of the bizhub 75 0/600 User’s Guide.
Managing Jobs (Job List) 11 bizhub 750/600 11-5 Managing Jobs (Job L ist) Chapter 11 The following information is listed in the Print tab. Item Name Description No. Job identification numb er a ssigned when the job is queued. User Name Displays the type (source) of the job.
11 Managing Jobs (Job List) 11-6 bizhub 750/600 Managing Jobs (Job L ist) Chapter 11 11.2 Performing Operations on Jobs To delete a job A queued job or job being printed (job in the Active Jobs list) can be deleted. 1 In the Basic screen, touc h [Job List].
Managing Jobs (Job List) 11 bizhub 750/600 11-7 Managing Jobs (Job L ist) Chapter 11 4 Check the information that is displayed, and then touch [Yes]. – To quit deleting the job, touch [No]. The job is deleted from the Current Jobs list and the Job List screen appears again.
11 Managing Jobs (Job List) 11-8 bizhub 750/600 Managing Jobs (Job L ist) Chapter 11 To check the job settings Job settings for stored job s, jobs being printed, jobs queued to be printed and held jobs can be checked. 1 In the Basic screen, touc h [Job List].
Managing Jobs (Job List) 11 bizhub 750/600 11-9 Managing Jobs (Job L ist) Chapter 11 Displayed Information The following information can be checked from the Job List screen.
11 Managing Jobs (Job List) 11-10 bizhub 750/600 Managing Jobs (Job L ist) Chapter 11 To check the job details 1 In the Basic screen, touc h [Job List]. The Job List screen appears. 2 Display the list containing the job whose details ar e to be checked.
Managing Jobs (Job List) 11 bizhub 750/600 11-11 Managing Jobs (Job L ist) Chapter 11 To display Current Jobs (Held Jobs and Active Jobs list s) The lists of received print job s for Copy mode and for computer p rinting is displayed. 1 In the Basic screen, touc h [Job List].
11 Managing Jobs (Job List) 11-12 bizhub 750/600 Managing Jobs (Job L ist) Chapter 11 To display Job History 1 In the Basic screen, touc h [Job List]. The Check Job screen appears. 2 Touch [Job History]. The Job History screen appears. 3 Touch [Deleted Jobs], [Finished Jobs], or [Active Jobs] to display the desired list of jobs.
Managing Jobs (Job List) 11 bizhub 750/600 11-13 Managing Jobs (Job L ist) Chapter 11 To print a sample copy of a stored j ob A single copy of a stored job can be printed in order to be check ed.
11 Managing Jobs (Job List) 11-14 bizhub 750/600 Managing Jobs (Job L ist) Chapter 11 – To exit the Release Held Job screen and return to the Active Jobs list in the Current Jobs list, touch [Cancel]. ! Detail To change the settings, touch [Change setting] in the Release Held Job screen.
Managing Jobs (Job List) 11 bizhub 750/600 11-15 Managing Jobs (Job L ist) Chapter 11 To print a stored jo b A job is removed from the Held Jobs list and printed. In addition, settings for the stored job can be changed. 1 Display the Held Jobs list in the Current Jobs list of the Print tab.
11 Managing Jobs (Job List) 11-16 bizhub 750/600 Managing Jobs (Job L ist) Chapter 11 5 Touch [Change Settin g]. The Change Settin g screen appe ars. 6 Touch the button f or the copy settin g that you wish t o change. – To change a value, press the [C] (clear) key, and then use the key- pad to type in the new value.
Managing Jobs (Job List) 11 bizhub 750/600 11-17 Managing Jobs (Job L ist) Chapter 11 7 The screen for the selected copy setting change the copy settings as desired, and then touch [OK]. ? Is there more information about the settings? % Refer to the appropriate section.
11 Managing Jobs (Job List) 11-18 bizhub 750/600 Managing Jobs (Job L ist) Chapter 11 To increase priority for printing The next job to be printed after the current job being printed can be selected.
Managing Jobs (Job List) 11 bizhub 750/600 11-19 Managing Jobs (Job L ist) Chapter 11 The selected job moves to the top of the list and printing of the job be- gins.
.
12 Utility Chapter 12 Utility.
12 Utility 12-2 bizhub 750/600 Utility Chapter 12 12 Utility 12.1 Overview of Utility Mode List of Regist ration Informatio n This section describes the buttons avai lable when the [Utility/Counter] key is pressed. 2 Note The buttons that appear in th e screens differ depending on the specifi ed settings.
Utility 12 bizhub 750/600 12-3 Utility Chapter 12 User Settin g (Cont.) [1] System Set- ting (Cont.) [3] Paper Tray Setting (Con t.) [3] Aut o Tra y Switch ON/OFF [4] No Matching Pa- per in Tray Se tt.
12 Utility 12-4 bizhub 750/600 Utility Chapter 12 User Setting (Cont.) [4] Copier Set- ting ( p. 12-21 ) Auto Booklet ON When Fold & Staple Auto Zoom for Combine /Booklet Sort/Group Auto Change Au.
Utility 12 bizhub 750/600 12-5 Utility Chapter 12 User Settin g (Cont.) [6] Printer Set- ting (Cont.) [3] PCL Setting [1] Typeface [2] Symbol Set [3] Font Size [4] Line/Page [5] CR/LF Mapping [4] PS Setting PS Error Print [5] Print Reports Configuration Page Demo Page PCL Font List PS Font List Administrator Set ting ( p.
12 Utility 12-6 bizhub 750/600 Utility Chapter 12 Administrator Settin g (Cont.) [1] System Set- ting (Cont.) [6] Restrict User Access (Cont.) [3] Restrict Access to Job Settings (Cont.
Utility 12 bizhub 750/600 12-7 Utility Chapter 12 [3] Vertical Ad- justment*** [7] ADF Centering*** Administrator Set ting (Cont.) [1] System Set- ting (Cont.
12 Utility 12-8 bizhub 750/600 Utility Chapter 12 [2] Group List [3] Pr o gr am List Administrator Settin g (Cont.) [3] One-To uch Registration (Cont.) [4] On e- Tou ch Registration List (Cont.) [4] E-Mail Sub- ject/Text L ist [4] User Authen ti- cation/Acc ount Track ( p.
Utility 12 bizhub 750/600 12-9 Utility Chapter 12 [2 ] Time Adjust- ment Settin g [3] Status Noti- fication Sett ing [1] Notification Address Set ting Administrator Set ting (Cont.) [5] Network Set- ting (Cont.) [0] Detail Setting (Con t.) [3] Status Noti- fication Se tting (Cont.
12 Utility 12-10 bizhub 750/600 Utility Chapter 12 Manual Desti- nation Inpu t Administrator Settin g (Cont.) [9] Secur ity Set- ting (Cont.) [4] Security Details (Cont.
Utility 12 bizhub 750/600 12-11 Utility Chapter 12 12.2 Selecting a Destination Register This section describes the main parameters and operations that can be per- formed after pressing the [Utility/Counter] key, then touching [1 One-Touch Registration].
12 Utility 12-12 bizhub 750/600 Utility Chapter 12 Displaying the Destination Register Screen The following procedure describes how to display the One-Touch Registra- tion Screen. 1 Press the [Utility/Coun- ter] key. 2 Touch [1 One-Touch Registration].
Utility 12 bizhub 750/600 12-13 Utility Chapter 12 2 Note To quit specifying the Utility mode setting, touch [Exit] in th e sub display area or press the [Utility/Counter] key. Otherwise, cancel the Utility mode by touching [Close] in each screen until the screen for the Copy, Scan or Box mode appe ars.
12 Utility 12-14 bizhub 750/600 Utility Chapter 12 12.3 Specifying User Settings This section describes the main parameters and operations that can be per- formed after pressing the [Utility/Counter] key, then touching [2 User Set- ting].
Utility 12 bizhub 750/600 12-15 Utility Chapter 12 2 Note To load paper of a different size into the tray 1 and 2 and the LCT, contact your technical representative.
12 Utility 12-16 bizhub 750/600 Utility Chapter 12 Reset Setting Parameter Description Settings (Default set- tings are underlined.) System Auto Reset Specify the desired length of time until the automatic system reset operation is performed.
Utility 12 bizhub 750/600 12-17 Utility Chapter 12 2 Reminder If “System Auto Reset” is set to “OFF”, the Enlarge Display mode is not canceled. In addition, user au thentication and account tr ack are can- celed after 1 minute even i f “System Auto Reset” i s set to “OFF”.
12 Utility 12-18 bizhub 750/600 Utility Chapter 12 Output Setting 2 Note [Output Setting], [Date/Time Setting], [Daylight Saving Time Setting] and [Original Image Density] appear only if th e “Administrator Security Level” parameter (displayed from the Administrator Setting screen) is set to “Level 2”.
Utility 12 bizhub 750/600 12-19 Utility Chapter 12 Original Image Density Display Setting Sub Screen Display ON/OFF Scan Basic Screen Default Setting Copy Screen Description Settings (Default set- tings are underlined.) Specify the initial density of the quality of the document.
12 Utility 12-20 bizhub 750/600 Utility Chapter 12 Initial Setting 2 Reminder To change the default settings for Sc an mode , press the [Scan] key, en- ter Utility mode, and then select a setting for this parameter.
Utility 12 bizhub 750/600 12-21 Utility Chapter 12 Copier Setting Parameter Description Settings (Default set- tings are underlined.) Auto Booklet ON When Fold & Staple Select whether or not the “B ooklet” function is selected automatically when the “Fold & Staple” setting is selected.
12 Utility 12-22 bizhub 750/600 Utility Chapter 12 2 Note [Auto Booklet ON When Fold & Staple] is available only if optional finisher FS-602 is installed.
Utility 12 bizhub 750/600 12-23 Utility Chapter 12 Scanner Setting Printer Setting 2 Note [Printer Setting] appears only if optional printer controller IC-202 is in- stalled. Parameter Description Black Compression Level Specify settings for scan ning.
12 Utility 12-24 bizhub 750/600 Utility Chapter 12 Displaying the User Setting Screen The following procedure describes how to display the User Setting Screen. 1 Press the [Utility/Coun- ter] key. 2 Touch [2 User Setting]. – An item can also be selected by pressing the key in the keypad for the number beside the desired button.
Utility 12 bizhub 750/600 12-25 Utility Chapter 12 2 Note To quit specifying the User mode setting, touch [Exit] in the sub display area or press the [Utility/Counter] key. Otherwise, cancel the User mode by touching [Close] in each screen until the screen for the Copy, Scan or Box mode appe ars.
12 Utility 12-26 bizhub 750/600 Utility Chapter 12 12.4 Specifying Administrator Settings This section describes the main parameters and operations that can be per- formed after pressing the [Utility/Counter] key, then touching [3 Administra- tor Setting].
Utility 12 bizhub 750/600 12-27 Utility Chapter 12 2 Note [Print/Fax Output Setting] appears only if optional p rinter controller IC- 202 is installed. The “Exit Tray Setting” parameter is available only if optional finisher FS- 504/FS-602 is in stalled.
12 Utility 12-28 bizhub 750/600 Utility Chapter 12 ! Detail If the weekly timer has be en set, leave the machin e plugged into the elec- trical outlet even if the machi ne has been turned off. If the weekly timer is set, correctly set the date and time.
Utility 12 bizhub 750/600 12-29 Utility Chapter 12 Expert Adjustment Parameter Description Settings (Default set- tings are underlined.) Original Im age Density Sp ecify the initial density of the quality of the document. A density can be speci- fied for each Orig.
12 Utility 12-30 bizhub 750/600 Utility Chapter 12 Finisher Adjust - ment Center Staple Position The stapling position when printing with the “Fold & St aple” function c an be ad- justed in 0.
Utility 12 bizhub 750/600 12-31 Utility Chapter 12 ! Detail When PK-505 and ZU-602 are installed, adjustments can be made using both the “Punch Adjustment” and “Z-Fold Position Adjustment” param- eters.
12 Utility 12-32 bizhub 750/600 Utility Chapter 12 ! Detail The “Original Size Detection Change 3” parameter specifies the detection of 8-1/2 × 14 and the Foolscap size. The size selected for the “Foolscap Size Setting” parameter can be changed.
Utility 12 bizhub 750/600 12-33 Utility Chapter 12 2 Note [3 User Box] appears only if the hard disk drive is installed. User Authentication/Account Track General Settings ! Detail The “Public User .
12 Utility 12-34 bizhub 750/600 Utility Chapter 12 User Authentication Setting Account Track Setting Print without Authentication Counter List ! Detail [Counter List] does not appear if “Public User Access” is set to “OFF” and “Account Track” is set to “OFF”.
Utility 12 bizhub 750/600 12-35 Utility Chapter 12 Network Setting Copier Setting Parameter Description Network Setting S pecify settings f or using the network. For details, refer to the Net- work Scanner Opera tions of the bizhub 75 0/600 User’s Guide.
12 Utility 12-36 bizhub 750/600 Utility Chapter 12 2 Note [Tri-Fold Printed Side Selection] i s available only if optional finisher FS- 602 is instal led. Printer Setting 2 Note [7 Printer Setting] appears only if optional printer controller IC-202 is in- stalled.
Utility 12 bizhub 750/600 12-37 Utility Chapter 12 System Connection Security Setting Administrator Password User Box Admin. Setting Administrator Security Level Parameter Description IS OpenAPI Sett ing Specify settin gs for using the n etwork. For detai ls, refer to t he Net- work Scanner Opera tions of the bizhub 75 0/600 User’s Guide.
12 Utility 12-38 bizhub 750/600 Utility Chapter 12 Security Details 2 Note [Print Data Capture] appears only if optional printer controller IC-202 is installed. HDD Setting Parameter Description Settings (Default set- tings are underlined.) Password Rules Select whether or not passwords are ap- plied.
Utility 12 bizhub 750/600 12-39 Utility Chapter 12 Displaying the Administrator Setting Sc reen The following procedure describes how to display the Administrator Setting Screen.
12 Utility 12-40 bizhub 750/600 Utility Chapter 12 3 Type in the password, and then touch [OK]. For details on typing in text, refer to “Entering Text” on page 13-2. The Administrator Setting screen appears. 2 Note To quit specifying the Utility mode setting, touch [Exit] in the sub display area or press the [Utility/Counter] key.
Utility 12 bizhub 750/600 12-41 Utility Chapter 12 12.5 Adjusting the Printer Adjusting the Starting Print Position at the Leading Edge Position The starting print position at the leading edge of each type of paper (with re- spect to the paper feed direction) can be adjusted.
12 Utility 12-42 bizhub 750/600 Utility Chapter 12 8 Press the [Start] key. A test pattern is printed. 9 Touch [Close]. The Leading Edge Adjustmen t screen appears again. 10 Check the distance (a) from the starting print position of the test pat- tern to the edge of the paper.
Utility 12 bizhub 750/600 12-43 Utility Chapter 12 Adjusting the Starting Print Position at the Left Edge The starting print position at the left edge of the paper (with respect to the paper feed direction) for each paper tray can be adjusted. 0 The starting print position is adjusted during manufactur ing of the ma- chine.
12 Utility 12-44 bizhub 750/600 Utility Chapter 12 9 Check the distances (b) from the print position of the test pattern to the edge of the paper. 10 If the desire prin t results are not a chieved, change th e adjustment value. – To increase distance (b), to uch [+].
Utility 12 bizhub 750/600 12-45 Utility Chapter 12 12.6 Adjusting the Finisher ! Detail For details on the “Fold & Staple” setting, refer to “To bind copies at the center (“Fold & Staple”)” on page 3-68.
12 Utility 12-46 bizhub 750/600 Utility Chapter 12 7 Touch [Test Copy]. The Test Copy screen appears. 8 Press the [Start] key. The sample copy is printed.
Utility 12 bizhub 750/600 12-47 Utility Chapter 12 2 Note Enter the value by mm using the keypad. Refer to the conversion rate be- low. 1 in. = 25.4 mm Adjusting the Half-Fold Position The half-fold position when printing with the “Fold & Staple” functi on can be adjusted.
12 Utility 12-48 bizhub 750/600 Utility Chapter 12 8 Press the [Start] key. The test pattern is printed. 9 Touch [Close]. The Half-Fold Position screen appears again. 10 Compare the width of the left pages of the copy sample with the width of the right pages to check for the center of the paper.
Utility 12 bizhub 750/600 12-49 Utility Chapter 12 2 Note Enter the value by mm using the keypad. Refer to the conversion rate be- low. 1 in. = 25.4 mm Adjusting the Hole-Punching Positions (Punch Vertical Position) When PK-505 is installed, the vertical position of the punched holes can be adjusted.
12 Utility 12-50 bizhub 750/600 Utility Chapter 12 7 Touch the button for the paper size to be set. 8 Touch [Test Copy]. The Test Copy screen appears. 9 Press the [Start] key. The sample copy is printed. 10 Touch [Close]. The Punch Vertical Position screen appears again.
Utility 12 bizhub 750/600 12-51 Utility Chapter 12 – If the punch positions are too far below the center of the paper, touch [–] (between –0.1 mm and – 5.0 mm). 13 Repeat steps 7 through 12 until the desired print results are achieved. 14 Touch [OK].
12 Utility 12-52 bizhub 750/600 Utility Chapter 12 Adjusting the Hole-Punching Positions (Punch Horizontal Position) When PK-505 is installed, the horizontal position of the punched holes can be adjusted. 0 Use the “Punch” function to print a single sample copy, and then perform the adjustment while checking th e sample that was created.
Utility 12 bizhub 750/600 12-53 Utility Chapter 12 7 Touch [Test Copy]. The Test Copy screen appears. 8 Press the [Start] key. The sample copy is printed. 9 Touch [Close]. The Punch Horizontal Position screen appears again. 10 Check the punch positions in the sample copy.
12 Utility 12-54 bizhub 750/600 Utility Chapter 12 – If the punch positions are too far on the left side of the paper, touch [–] (between –0.1 mm and –5.0 mm). 12 Repeat steps 7 through 11 unt il the desired print results are achieved. 13 Touch [OK].
Utility 12 bizhub 750/600 12-55 Utility Chapter 12 Adjusting the Hole-Punching Positions (Punch Unit Vert. Position) When ZU-602 is installed, the ve rtical position of the punche d holes can be adjusted. 0 Use the “Punch” function to print a single sample copy, and then perform the adjustment while chec king the sample that was created.
12 Utility 12-56 bizhub 750/600 Utility Chapter 12 7 Touch the button for the paper size to be set. 8 Touch [Test Copy]. The Test Copy screen appears. 9 Press the [Start] key. The sample copy is printed. 10 Touch [Close]. The Punch Unit Vert. Position screen appears again.
Utility 12 bizhub 750/600 12-57 Utility Chapter 12 – If the punch positions are too far below the center of the paper, touch [–] (between –0.1 mm and – 5.0 mm). 13 Repeat steps 7 through 12 until the desired print results are achieved. 14 Touch [OK].
12 Utility 12-58 bizhub 750/600 Utility Chapter 12 Adjusting the Hole-Punching Positions (Punch Unit Hor. Position) When ZU-602 is i nstalled, the horizon tal position of the punched holes can be adjusted. 0 Use the “Punch” function to print a single sample copy, and then perform the adjustment while checking th e sample that was created.
Utility 12 bizhub 750/600 12-59 Utility Chapter 12 7 Touch [Test Copy]. The Test Copy screen appears. 8 Press the [Start] key. The sample copy is printed. 9 Touch [Close]. The Punch Unit Hor. Position screen appe ars again. 10 Check the punch positions in the sample copy.
12 Utility 12-60 bizhub 750/600 Utility Chapter 12 – If the punch positions are too far on the left side of the paper, touch [–] (between –0.1 mm and –5.0 mm). 12 Repeat steps 7 through 11 unt il the desired print results are achieved. 13 Touch [OK].
Utility 12 bizhub 750/600 12-61 Utility Chapter 12 Adjusting the Hole-Punching Positions (Punch Resist Loop Size) The slope of the punched hole positions for double-sided printing and out- putting cover pages can be adjusted.
12 Utility 12-62 bizhub 750/600 Utility Chapter 12 7 Touch the button for setting to be specified. 8 Touch [Test Copy]. The Test Copy screen appears. 9 Press the [Start] key. The sample copy is printed. 10 Touch [Close]. The Punch Regist Loop Size screen appears again.
Utility 12 bizhub 750/600 12-63 Utility Chapter 12 13 Repeat steps 7 through 11 until the desired print results are achieved. 14 Touch [OK]. – To cancel changes to the settings, touch [Cancel]. 2 Note Enter the value by mm using the keypad. Refer to the conversion rate be- low.
12 Utility 12-64 bizhub 750/600 Utility Chapter 12 6 Touch [1st Z-Folded Position] or [2nd Z-Folded Position]. – Touch [1st Z-Folded Position] to adjust the first folding position. – Touch [2nd Z-Folded Position] to adjust the second foldi ng posi- tion.
Utility 12 bizhub 750/600 12-65 Utility Chapter 12 12 If the desire prin t results are not a chieved, change the adjustme nt val- ue. – If the folding position is too far on the left side of the paper, touch [+] (between 0.1 mm and 12.7 mm). – If the folding position is too far on the right side of the paper, touch [–] (between –0.
12 Utility 12-66 bizhub 750/600 Utility Chapter 12 13 Repeat steps 7 through 12 unt il the desired print results are achieved. 14 Touch [OK]. – To cancel changes to th e settings, touch [Cancel]. 2 Note Enter the value by mm using the keypad. Refer to the conversion rate be- low.
Utility 12 bizhub 750/600 12-67 Utility Chapter 12 6 Touch the button for the paper size to be set. 7 Touch [Test Copy]. The Test Copy screen appears. 8 Press the [Start] key. The sample copy is printed. 9 Touch [Close]. The Tri-Fold Position screen appears again.
12 Utility 12-68 bizhub 750/600 Utility Chapter 12 – If the folding position is too far on the left side of the paper, touch [–] (between –0.1 mm and –12.8 mm). 12 Repeat steps 6 through 11 unt il the desired print results are achieved. 13 Touch [OK].
Utility 12 bizhub 750/600 12-69 Utility Chapter 12 5 Touch [6 2 Position Staple]. The 2 Position Staple screen ap pears. 6 Touch the button for setting to be specified. 7 Touch [Test Copy]. The Test Copy screen appears. 8 Press the [Start] key. The sample copy is printed.
12 Utility 12-70 bizhub 750/600 Utility Chapter 12 Cover Sheet Tray Size Adjust the cover shee t tray size if the paper cannot be de tected correctly or if one side of the cove r sheet feeder is adjusted. 0 This parameter is available only if cover sheet feeder PI-501 is installed.
Utility 12 bizhub 750/600 12-71 Utility Chapter 12 12.7 Authentication Method User authentication and account track settings can be specified to limit the use of this machine. User authentication settings are specifi ed to manage in- dividuals, and accou nt track settings are specified to manage groups an d multiple users.
12 Utility 12-72 bizhub 750/600 Utility Chapter 12 When User Authentication and Account Track Are Synchronized This setup is used when the machine is used by multiple departments and the use by each employee is managed by each department.
Utility 12 bizhub 750/600 12-73 Utility Chapter 12 When User Authentication and Account Track Are Used Separately This setup is used when the machine is used by multiple employees with each employee performing multiple duties, which are to be totaled separate- ly.
12 Utility 12-74 bizhub 750/600 Utility Chapter 12 To select an authentication method 1 Display the Administrator Setting screen. – For details on displaying the Administrator Setting screen, refer to “Displaying the Administrator Setting Screen” on page 12-39.
Utility 12 bizhub 750/600 12-75 Utility Chapter 12 5 Beside “Public User Access”, touch the button for the desired setting. – To prohibit unregistered users from using this machine, touch [Re- strict].
12 Utility 12-76 bizhub 750/600 Utility Chapter 12 – Public user access is not permitted if “Synchronize User Authent i- cation & Account Track” is set t o “Do Not Synchronize”. 9 Beside “# of Counters Assigned for Users”, s pecify the desired setting.
Utility 12 bizhub 750/600 12-77 Utility Chapter 12 2 Reminder Specify the external server authentication settings according to the net- work environment being used. Active Directory: Windows 2000 Server SMB: Windows NT 4.0 Server NDS: NetWare 5.1, NetWare 6.
12 Utility 12-78 bizhub 750/600 Utility Chapter 12 12.8 User Authentication Setting User authentication settin gs can be specified. Administrative Setting User Name List User authentication settings can be specified to displ ay [List] in the user au- thentication screen an d the User Name screen.
Utility 12 bizhub 750/600 12-79 Utility Chapter 12 4 Touch [1 Administrative Setting]. 5 Touch [User Name List], and then touch either [ON] or [OFF]. 6 Touch [Default Function Permission]. The Default Function Permission screen appears. 7 Touch the buttons for the desired settings.
12 Utility 12-80 bizhub 750/600 Utility Chapter 12 User Registration The password, printing permissions, number of prints allowed, and function permissions can be specified for each use r of this machine. As an example, the following procedure de scrib es how to register a user with authentication performed by the machine.
Utility 12 bizhub 750/600 12-81 Utility Chapter 12 6 Touch [User Name]. – To delete the selected user information, touch [Delete]. The User Name screen appears. 7 Type in the user name (up to 64 characters), and then touch [OK]. – For details on typing in text, refer to “Entering Text” on page 13-2.
12 Utility 12-82 bizhub 750/600 Utility Chapter 12 12 Type in the e-mail address (up to 320 characters), and then touch [OK]. The e-mail address is set. If the e-mail address exceeds 116 characters, [Details] appears in the User Registration screen. Touch [Details] to display the E-Mai Address Details screen and the entire e-mail address.
Utility 12 bizhub 750/600 12-83 Utility Chapter 12 19 Touch the button for the desired setting for each operation. – To permit the operation to be performed, touch [Allow]. – To prohibit the operation to be performed, touch [Restrict]. – Touch [All Users] to apply the settin gs in the current screen to all registered users.
12 Utility 12-84 bizhub 750/600 Utility Chapter 12 User Counter This function is used to check th e following data for each user. Copy + Print This count shows the total number of copies and printouts made.
Utility 12 bizhub 750/600 12-85 Utility Chapter 12 3 Touch [2 User Authentication Settin g]. The User Authentica tion Setting scre en appears. 4 Touch [3 User Counter].
12 Utility 12-86 bizhub 750/600 Utility Chapter 12 12.9 Account Track Setting 2 Note A total of 1,000 users and accounts can be registered on this machine. Account Track Registration The password and number of prints allowed can be specified for each ac- count using this machine.
Utility 12 bizhub 750/600 12-87 Utility Chapter 12 5 Touch the button for the desired account. The Account Track Registration screen appears. ? How is the selected account information deleted? % Touch [Delete]. 6 Touch [Account Name]. The Account Name screen appears.
12 Utility 12-88 bizhub 750/600 Utility Chapter 12 7 Type in the account name (u p to 8 characters), and then tou ch [OK]. – For details on typing in text, refer to “Entering Text” on page 13-2. – If [Name] was displayed, type in the account name (up to 20 char- acters), and then touch [OK].
Utility 12 bizhub 750/600 12-89 Utility Chapter 12 11 Touch [Max. Allowance Set]. The Max. Allowance Set screen appears. 12 Touch [No Limit] or [Limit]. – If “Limit” was selected, use the keypad to type in the maximum number allowed. – Touch [All Accounts] t o apply the settings in the c urrent screen to all registered acc ounts.
12 Utility 12-90 bizhub 750/600 Utility Chapter 12 Account Track Counter This function is used to check the following data for eac h account. Copy + Print This count shows the total number of copies and printouts made.
Utility 12 bizhub 750/600 12-91 Utility Chapter 12 To check the counter 1 Display the Administrator Setting screen. – For details on displaying the Administrator Setting screen, refer to “Displaying the Administrator Setting Screen” on page 12-39.
12 Utility 12-92 bizhub 750/600 Utility Chapter 12 12.10 Password Rules If password rules are applied and already specified passwords do not meet the password rules, those passwords are not accepted when they are en- tered.
Utility 12 bizhub 750/600 12-93 Utility Chapter 12 ID for the confidential doc ument Password for the confidential document 2 Note Use the administrator password when specifying settings on the Admin- istrative Setting screen. Use the user name/account name wh en user authentication/ac count track settings have been applied.
.
13 Appendix Chapter 13 Appendix.
13 Appendix 13-2 bizhub 750/600 Appendix Chapter 13 13 Appendix 13.1 Entering Text The following procedure describes how to use the keyboard that appears in the touch panel for typing in the names of registered accounts and cust om paper sizes. The keypad can also be used to typ e in numbers.
Appendix 13 bizhub 750/600 13-3 Appendix Chapter 13 Touching [Shift] switches th e keyboard displ ay between lo wercase l etters (numbers) and uppercase letters (symbols).
13 Appendix 13-4 bizhub 750/600 Appendix Chapter 13 To type text % Touch the button for the desired ch aracter from the keyboard that ap- peared. – To type in uppercase letters or symbols, touch [Shift]. – Numbers can also be typed in with the keypad.
Appendix 13 bizhub 750/600 13-5 Appendix Chapter 13 13.2 Function Combination Table Function Combination Table.
13 Appendix 13-6 bizhub 750/600 Appendix Chapter 13.
Appendix 13 bizhub 750/600 13-7 Appendix Chapter 13.
13 Appendix 13-8 bizhub 750/600 Appendix Chapter 13.
Appendix 13 bizhub 750/600 13-9 Appendix Chapter 13.
13 Appendix 13-10 bizhub 750/600 Appendix Chapter 13.
Appendix 13 bizhub 750/600 13-11 Appendix Chapter 13 Function combination code k eys o : The functions can be combined. , : The functions cannot be combined. The function set last has priority. : The functions cannot be combined. The function set first has priority.
13 Appendix 13-12 bizhub 750/600 Appendix Chapter 13 Automatically selected when setting s for the “Book Copy” function are selected. If the “Auto Booklet ON When Fold & Staple” parameter is set to “Auto Se lect Booklet”, the setting specified first is given priority and a warning message appears.
14 Index Chapter 14 Index.
14 Index 14-2 bizhub 750/600 Index Chapter 14 14 Index 14.1 Index Numerics 1-sided/2-sided print ............... ...... 3-40 2 in 1 ............ .............. .............. ...... 3-50 2 position staple ................ 3-61 , 12-69 4 in 1 .........
Index 14 bizhub 750/600 14-3 Index Chapter 14 Cover sheet tray size ................... 12-70 Crisscross sorting ........................ .. 3-56 Current jobs ................ .............. ... 11-11 Custom size settings ........... 7-12 , 7-27 Custom size settings store .
14 Index 14-4 bizhub 750/600 Index Chapter 14 Keypad ............. .............. ............... 2-15 L Large capacity tray LU-401/LU-402 ............. .............. ..... 2-7 , 2-8 , 2- 48 , 6-5 Leading edge adjustment ............ 12-41 Left edge adjustment .
Index 14 bizhub 750/600 14-5 Index Chapter 14 Printer controller IC-202 ......... ......... 2-7 Printer setting ..... ............. 12-23 , 12-36 Printing priority ....................... ..... 11-18 Proof copy .......... ...................... ......
14 Index 14-6 bizhub 750/600 Index Chapter 14 Tray 4 ........... ........... ........... .... 2-3 , 2-41 Tri-fold position adjustment ........ 12-66 Troubleshooting ............ ........... ........ 5-2 Troubleshooting reference tables ............. .
Copyright 2005 Printed in China 2005. 8 57AE97350 http://konicaminolta.com ● This manual was printed using 100% post-consumer recycled paper. ● This manual was printed with soy ink.
Un punto importante, dopo l’acquisto del dispositivo (o anche prima di acquisto) è quello di leggere il manuale. Dobbiamo farlo per diversi motivi semplici:
Se non hai ancora comprato il Konica Minolta 750 è un buon momento per familiarizzare con i dati di base del prodotto. Prime consultare le pagine iniziali del manuale d’uso, che si trova al di sopra. Dovresti trovare lì i dati tecnici più importanti del Konica Minolta 750 - in questo modo è possibile verificare se l’apparecchio soddisfa le tue esigenze. Esplorando le pagine segenti del manuali d’uso Konica Minolta 750 imparerai tutte le caratteristiche del prodotto e le informazioni sul suo funzionamento. Le informazioni sul Konica Minolta 750 ti aiuteranno sicuramente a prendere una decisione relativa all’acquisto.
In una situazione in cui hai già il Konica Minolta 750, ma non hai ancora letto il manuale d’uso, dovresti farlo per le ragioni sopra descritte. Saprai quindi se hai correttamente usato le funzioni disponibili, e se hai commesso errori che possono ridurre la durata di vita del Konica Minolta 750.
Tuttavia, uno dei ruoli più importanti per l’utente svolti dal manuale d’uso è quello di aiutare a risolvere i problemi con il Konica Minolta 750. Quasi sempre, ci troverai Troubleshooting, cioè i guasti più frequenti e malfunzionamenti del dispositivo Konica Minolta 750 insieme con le istruzioni su come risolverli. Anche se non si riesci a risolvere il problema, il manuale d’uso ti mostrerà il percorso di ulteriori procedimenti – il contatto con il centro servizio clienti o il servizio più vicino.
