Manuale d’uso / di manutenzione del prodotto K-531-SB del fabbricante Kenwood
Vai alla pagina of 48
K-531 COMPACT HI-FI COMPONENT SYSTEM INSTRUCTION MANUAL GVT0353-002A (E, X) K-531[E_X].indb 1 K-531[E_X].indb 1 12.8.1 11:40:02 AM 12.8.1 11:40:02 AM.
2 K-531 Safety precautions Caution: Read this page carefully to ensure safe operation. THE LIGHTNING FLASH WITH ARROWHEAD SYMBOL, WITHIN AN EQUILATERAL TRIANGLE, IS INTENDED TO ALERT THE USER TO THE P.
3 English Safety precautions CAUTION Do not block the ventilation openings or z holes. (If the ventilation openings or holes are blocked by a newspaper or cloth, etc., the heat may not be able to get out.) Do not place any naked flame sources, such z as lighted candles, on the apparatus.
4 K-531 4 K-531 4 K-531 Safety precautions Declaration of Conformity with regard to the z EMC Directive 2004/108/EC Declaration of Conformity with regard to the z R&TTE Directive 1999/5/EC Manufac.
Safety Precautions 5 English Contents Safety precautions .................... 2 Introduction .................................... 6 Connection ...................................... 8 Part names and functions .............. 10 Important information ..
6 K-531 Introduction How to read this manual The explanations in this manual primarily describe operation procedures using the remote control. If the z main unit has the same or similar button names, they can also be used for the operations. The displays shown in this instruction manual may differ from the actual displays.
7 English Installing the System Always install the System on a flat, stable surface. When installing the System on a stand of some sort, be z sure to check the strength of the stand. The speakers are not magnetically shielded. The magnets used in the speakers may cause color z irregularities on CRT TVs or CRT monitors.
8 K-531 Connection CAUTION Do not plug the AC power cord into an AC wall outlet until all the connections are z completed. Before disconnecting any cords or cables, always turn the System off and unplug z the power cord from AC wall outlet. Since antenna installation requires skill and experience, always consult your dealer z before installation.
9 English Microcomputer malfunctions: z If the System is connected correctly and still does not operate normally or shows display errors, reset the microcomputer. (P.45) Refer also to the instruction manual that comes with the component connected to the System.
10 K-531 While the STANDBY/TIMER LED on the main unit lights up, the System is using very weak current to z maintain the built-in memory (Standby mode). While in Standby mode you can turn the System on using the remote control. When the headphones are connected, no sound is emitted from the speakers.
11 English Display Part names and functions 1 Lights during USB connection. (P.30) 2 Lights while the sleep timer is set. (P.38) 3 Lights while the program timer is set. (P.39, 40) 4 AUTO Lights during automatic tuning. Goes off during manual tuning. (P.
12 K-531 12 K-531 12 K-531 One-Touch Operation: While in Standby mode, pressing [BLUETOOTH £¥8 ] , [CD £¥8 ] , [iPod £¥8 ] , [USB £¥8 ] , [TUNER/BAND] , [AUDIO IN] , [AUX] , or [D-IN] also turns on the power, and switches the input source. Remote control (RC-RP0503E) Part names and functions Selects tracks or radio stations (P.
13 English 13 English 13 English Part names and functions How to use the number buttons on the remote control Use the number buttons to select tracks on a disc/preset stations. To select 3rd item, press [3] . To select 17th item, press [ 10] , [1] , and then [7] .
14 K-531 Important information Supported media Media Explanation USB USB flash memory Never connect any other device besides USB flash memory z or a USB mass storage class compliant digital audio player to the terminal.
15 English Important information Disc formats ISO 9660 Level 1, ISO 9660 Level 2, Joliet, Romeo Number of file limits CD Max. files/folders: 512 in total Max. folders: 255 Files per folder: 511 USB Max. files: 2000 Max. folders: 999 Files per folder: 999 Max.
16 K-531 16 K-531 16 K-531 Precautions when writing data to media Discs recorded in Packet Write mode or UDF (Universal Disc Format) cannot be played. z When writing data to a disc, always close the session or finalize the disc. The disc may not play properly if z you do not close the session or finalize the disc.
17 English 17 English 17 English Important information Handling discs Handling precautions z When holding a disc, take care not to touch the played surface. Discs playable on the System z This System can play back a CD (12 cm, 8 cm), CD-ROM, CD-R, CD-RW or the audio part of a CD-EXTRA.
18 K-531 Track numbers may not be displayed correctly for the following types of discs. Discs recorded in Mix mode * z Discs recorded in multiple sessions z Discs recorded in mixed formats of CD-DA format and formats that are not music data z * Mix mode combines the CD-DA format with audio files, such as MP3 and WMA.
19 English About Resume function (for MP3/WMA only) When you stop playback by pressing z [ 7 ] , the track being played is stored. Pressing the [CD £¥8 ] restarts playback from the beginning of that track. (Resume function) The Resume function is canceled if you change the input source or turn off the power.
20 K-531 20 K-531 20 K-531 If you press z [REPEAT] during program play, “ ” and “PGM” indicators light up and repeat playback begins for the selected tracks.
21 English 21 English 21 English The specified program is deleted if.... You change the input source or turn off the System. z You remove the disc for which program playback is set. z CD Program play You can select up to 50 tracks and play them in the order you like.
22 K-531 There is no sound while tuning (automatic/manual) is in progress. z Automatic tuning provides stereo reception while manual tuning provides monaural reception. z Radio Preparation: Connect the antenna cords. (P.8) Listening to FM/AM radio 1 Press [TUNER/BAND] to select “FM” or “AM”.
23 English Radio Data System stations are given priority during automatic presetting. If there is memory left z after presetting, this unit continues presetting regular FM and AM stations.
24 K-531 There is no sound while searching is in progress. z Some stations may not be provided or may be given different names depending on countries or z areas. Radio Data System Preparation: Press z [TUNER/BAND] to select “FM”. Preset Radio Data System stations with AUTO MEMORY function.
Safety Precautions 25 English Refer also to the instruction manual that comes with your BLUETOOTH device. BLUETOOTH You can listen to music from your BLUETOOTH mobile phone or BLUETOOTH device over a wireless connection.
26 K-531 26 K-531 26 K-531 BLUETOOTH Listening to a BLUETOOTH device Once the BLUETOOTH device is registered with the System, connect the BLUETOOTH device and start playing music.
27 English 27 English 27 English BLUETOOTH Other BLUETOOTH settings 1 Press [BLUETOOTH SETUP]. 2 Press [ 2 ] or [ 3 ] to select an item, then press [ENTER]. PAIRING? z * 1 : Enters pairing process. (P.25) RECEIVE? z * 1 : Establishes the connection with the last connected BLUETOOTH device.
28 K-531 You cannot connect an iPod/iPhone to the System if it is in a cover, case, or with other accessories. z Always remove it. Connecting an iPod/iPhone to the System without using the dock adapter may deteriorate or z damage the connector. Always use the dock adapter.
29 English Other operations during playback To pause and resume playback Press [iPod £¥8 ] . To fast-forward or reverse Press and hold [ ¢ ] to fast-forward. Press and hold [ 4 ] to reverse. To skip tracks Press [ ¢ ] to skip to the next track. Press [ 4 ] to skip to the beginning of a track.
30 K-531 Refer also to the instruction manual that comes with the USB device. z You cannot use an iPod/iPhone by connecting to the z terminal on the System. When connecting using a USB cable, use a USB cable whose length is less than 1 m. z Depending on the USB device being connected, it may take some time for the System to recognize z it.
31 English When you stop playback by pressing z [ 7 ] , the track being played is stored (“ 3 ” indicator flashes). Pressing the [USB £¥8 ] restarts playback from the beginning of that track. (Resume function) The Resume function is canceled if you press z [ 7 ] again or turn off the power.
32 K-531 Refer also to the instruction manual that comes with the external component. z This System can play PCM (32 kHz, 44.1 kHz, 48 kHz, 88.2 kHz, 96 kHz) digital signals. z External components Preparation: Connect an external component to the AUX PLAY IN or DIGITAL IN terminals on the rear panel.
Safety Precautions 33 English Digital audio players, etc. Preparation: Connect a component (such as a digital audio player) to the AUDIO IN terminal on the rear panel. Refer to “Other connections (commercially available accessories)” for connection (P.
34 K-531 USB recording You can record the sound from an Audio CD, FM/AM radio broadcast, or an external component to the USB device in MP3 format. Preparation: Connect a USB device (with sufficient free space) for recording to the terminal. (P.30) Recording all tracks of a CD 1 Press [CD £¥8 ] to select “CD” source, then press [ 7 ].
35 English USB recording Selecting the recording sound quality 1 Press [CD £¥8 ], [TUNER/BAND ], [AUDIO IN], or [ AUX] to select an input source. 2 Press [MODE]. 3 Press [ 2 ] or [ 3 ] to select “REC FORMAT”, then press [ENTER]. 4 Press [ 5 ] or [ ∞ ] to select the recording sound quality, then press [ENTER].
36 K-531 Adjusting super-bass tones (D-BASS) The System has a digital signal processor (DSP), which allows you to adjust the impact of super-bass tones. 1 Press [D-BASS]. 2 Press [ 5 ] or [ ∞ ] to adjust the level (0 to 10), then press [ENTER]. Higher numbers give more pronounced super-bass tones.
37 English Matching the acoustic effect to the listening environment (CONEQ) The CONEQ (Convolution Equalizer) digital sound correction technology allows you to select the suitable acoustic effect to your room. 1 Press [MODE]. 2 Press [ 2 ] or [ 3 ] to select “CONEQ SET”, then press [ENTER].
38 K-531 Setting the sleep timer (SLEEP) This function automatically turns the System off after a set interval. You can set an interval from 10 to 90 minutes (in 10-minute increments). 1 Press [SLEEP] repeatedly to select the time interval to turn off the System.
39 English Timer settings Setting the program timer (TIMER SET) This function allows you to use the timer to start playback or recording automatically at a specified time.
40 K-531 40 K-531 40 K-531 Timer settings 3 Press [ 5 ] or [ ∞ ] to make selection, then press [ENTER]. ~ Select “PROG. 1” or “PROG. 2”. Ÿ Select “ON” or “OFF”. Selecting “OFF” ends the procedure and restores the original display.
Safety Precautions 41 English Other settings Setting the display brightness (DIMMER) Adjust the display brightness according to your preferences and the conditions in the room. 1 Press [DIMMER] repeatedly. Each time you press the button, the mode changes as.
42 K-531 42 K-531 42 K-531 Auto Power Save does not work while recording on the USB device. z When recording audio signals from the AUX REC OUT terminals to the other component, Auto z Power Save activates.
Safety Precautions 43 English Troubleshooting Whenever the System is not operating as expected, check the following tables to see if you can resolve the problem yourself before requesting service. Symptoms Solution Amplifier / Speakers No sound comes out from the speakers.
44 K-531 44 K-531 44 K-531 Symptoms Solution Tuner A radio broadcast cannot be received. Connect the antennas. (P.8) z Connect the black and white cords of the AM loop antenna correctly. z (P.8) Select the broadcast band (AM or FM). (P.22) z Tune the radio to the frequency of the desired station.
45 English 45 English 45 English Troubleshooting Symptoms Solution USB No sound can be heard when USB flash memory or a USB audio player is connected. Plug in the USB flash memory correctly. (P.30) z Connect the USB cable correctly. (P.30) z Check to make sure the USB audio player is turned on.
46 K-531 Specifications Amplifier Effective output power during STEREO operation 40 W + 40 W, RMS (1 kHz, 10% T.H.D., 4 Ω) Total harmonic distortion 0.03% (1 kHz, 1 W, 4 Ω) Tone control characteristics BASS (TURN OVER 100 Hz) ±4.0 dB (at 100 Hz) (TURN OVER 150 Hz) ±6.
47 English CD player Scanning method Semiconductor laser BLUETOOTH Version BLUETOOTH ver. 2.1 +EDR Class 2 Compatible BLUETOOTH profile A2DP (Advanced Audio Distribution Profile)* AVRCP (Audio Video Remote Control Profile) Communication format 2.4 GHz FHSS Maximum communication range Line of sight approx.
F or your r ecords Record the serial number , found on the back of the unit, in the spaces designated on the warranty card, and in the space provided below . Refer to the model and serial numbers whenever you call upon your dealer f or information or service on this product.
Un punto importante, dopo l’acquisto del dispositivo (o anche prima di acquisto) è quello di leggere il manuale. Dobbiamo farlo per diversi motivi semplici:
Se non hai ancora comprato il Kenwood K-531-SB è un buon momento per familiarizzare con i dati di base del prodotto. Prime consultare le pagine iniziali del manuale d’uso, che si trova al di sopra. Dovresti trovare lì i dati tecnici più importanti del Kenwood K-531-SB - in questo modo è possibile verificare se l’apparecchio soddisfa le tue esigenze. Esplorando le pagine segenti del manuali d’uso Kenwood K-531-SB imparerai tutte le caratteristiche del prodotto e le informazioni sul suo funzionamento. Le informazioni sul Kenwood K-531-SB ti aiuteranno sicuramente a prendere una decisione relativa all’acquisto.
In una situazione in cui hai già il Kenwood K-531-SB, ma non hai ancora letto il manuale d’uso, dovresti farlo per le ragioni sopra descritte. Saprai quindi se hai correttamente usato le funzioni disponibili, e se hai commesso errori che possono ridurre la durata di vita del Kenwood K-531-SB.
Tuttavia, uno dei ruoli più importanti per l’utente svolti dal manuale d’uso è quello di aiutare a risolvere i problemi con il Kenwood K-531-SB. Quasi sempre, ci troverai Troubleshooting, cioè i guasti più frequenti e malfunzionamenti del dispositivo Kenwood K-531-SB insieme con le istruzioni su come risolverli. Anche se non si riesci a risolvere il problema, il manuale d’uso ti mostrerà il percorso di ulteriori procedimenti – il contatto con il centro servizio clienti o il servizio più vicino.
