Manuale d’uso / di manutenzione del prodotto RX-EX90 del fabbricante JVC
Vai alla pagina of 54
For Customer Use: Enter below the Model No. and Serial No. which are located either on the rear , bottom or side of the cabinet. Retain this information for future reference.
SUBWOOFER VOLUME 12 dB 10 dB 8 dB 6 dB 4 dB 2 dB 0 dB ME-EX90 SUBWOOFER AMPLIFIER SUBWOOFER LEVEL STANDBY PLAY MODE REPEAT STANDBY XL-EX90 COMPACT DISC PLAYER CD 3 CD 2 CD 1 /CANCEL PLAY & EXCHANG.
3 CA-EX90 W elcome ! We would like to thank you for purchasing one of our JVC products. Before connecting this unit to the wall outlet, please read the instructions carefully to ensure that you obtain the best possible performance. If you have any questions, please consult your JVC dealer .
4 CA-EX90 T able of Contents Welcome ! .......................................................... 3 Important cautions .............................................. 3 For safe use, observe the following ................... 3 Parts Index .............
5 CA-EX90 Front Panels Amplifier/tuner Parts Index BAND VOLUME UP KEY MODE DOWN INPUT PHONES RX-EX90 INTEGRATED AMPLIFIER / TUNER STANDBY DIRECT S. A. BASS POWER 3 4 5 2 1 9 8 7 6 11 10 Subwoofer ampl.
6 CA-EX90 Amplifier/tuner front panel 1 POWER button Press to switch the power between ON and ST ANDBY . ST ANDBY indicator Lights up when the power is in ST ANDBY mode. T urns off when power is ON. 2 Display 3 Remote sensor 4 KEY MODE button Press to switch the operation mode of the < and > (cursor) buttons.
7 CA-EX90 Displays Amplifier/tuner CD player PRESET VOLUME DAILY SLEEP REC MD CD TAPE TUNER AUX 1 2 3 4 5 6 7 PROGRAM RANDOM REPEAT ALL 1 CD 12 34 5 67 89 1 0 11 12 13 14 15 DISC 8 8 8 10 9 11 12 13 EN01-23.
8 CA-EX90 CD player display 8 Play indicators ‹ : Lights up during CD playback. * : Lights up during pause. 9 Disc indicator Shows the CD disc number being played or selected. p Character display Shows the track number , play time, program sequence, etc.
9 CA-EX90 Rear Panels Amplifier/tuner CD player LEFT LEFT ( FOR ME-EX90 ) RIGHT OUT(REC) IN (PLAY) OUT(REC) IN (PLAY) RIGHT AM EXT AM LOOP FM FM (75 ) 1 2 3 4 MAIN SPEAKERS SYNCHRO GNDGND ANTENNA CD M.
10 CA-EX90 Amplifier/tuner rear panel 1 CD input jacks Connect to the ANALOG OUT jacks of the CD player . 2 MD input/output jacks Connect to the output/input jacks of the MD recorder . OUT (REC): Connect to the IN (REC) jacks of the MD recorder . IN (PLA Y): Connect to the OUT (PLA Y) jacks of the MD recorder .
11 CA-EX90 Remote control Remote control 1 POWER Press to switch the power between ON and ST ANDBY . 2 Number buttons • Use to select preset channels when listening to the tuner . • Use to select tracks after pressing CD, CD1, CD2, CD3 or PLA Y MODE.
12 CA-EX90 9 T APE DIRECTION Press to change the tape direction when using the cassette deck. p 4 1 (skip back) / < • Press to skip or search backward on the CD player after pressing CD,CD1,CD2,CD3, or PLA Y MODE. • Press to rewind on the cassette deck after pressing T APE or T APE CONTROL.
13 CA-EX90 Supplied Accesories Before setting up your system make sure you received all of the following supplied accesories. Setting up the System RX-EX90 (Amplifier/tuner) XL-EX90 (CD player) AC pow.
14 CA-EX90 AM EXT AM LOOP FM FM (75 ) GNDGND ANTENNA Place the EX series as shown below . Connections Before Making Any Connections • Be sure to confirm the locations of the left and right, + and –, and IN and OUT terminals on each component and make connections correctly and firmly .
15 CA-EX90 Connecting the CD player and subwoofer amplifier Audio pin cord Stereo audio pin cords: Use to connect the CD player’ s ANALOG OUT jacks to the CD input jacks on the RX-EX90 amplifier/tuner . Also use to connect the subwoofer amplifier’ s SUB-WOOFER IN jack to the SUB-WOOFER OUT jack on the RX-EX90 amplifier/tuner .
16 CA-EX90 Connecting other components Audio pin cord Be sure to connect jacks with plugs of the same colors for correct L (Left) and R (Right) connections. Connect this unit’ s OUT (REC) jacks to the IN (REC) jacks on a MD recorder or cassette deck.
17 CA-EX90 Connecting the Speakers Connect the left speaker to the LEFT speaker terminals and connect the right speaker to the RIGHT speaker terminals.
18 CA-EX90 Remote control batteries Load the supplied batteries (2) into the remote control. 1 Open the battery case. Push down and pull the lid in the direction of the arrow . 2 Load the batteries. Insert two R6P(SUM-3)/AA(15F) batteries. Match the polarity (+ and –) of the batteries with the + and – marks inside the battery compartment.
19 CA-EX90 Setting the Clock This unit incorporates a clock with a 12-hour display . Be sur e to set the clock before operating the unit. The clock can be set either in ON or ST ANDBY mode of power . Use the remote control unit to set the clock. 1 Press CLOCK/TIMER.
20 CA-EX90 T urning on the Power Press POWER. The ST ANDBY indicator goes out and “HELLO” appears in the display . ME-EX90 subuwoofer amplifier also turns on. • Pressing POWER of RX-EX90 turns on the source component previously selected. • Pressing POWER of the other EX90 components (CD player , etc.
21 CA-EX90 Adjusting the Sound Emphasizing the bass Press S.A.BASS. “S.A.BASS” and “ON” appear in the display and the S.A.BASS indicator lights up. T o cancel the bass emphasis Press S.A.BASS again. “S.A.BASS” and “OFF” appear in the display and the S.
22 CA-EX90 Adjusting the Balance Use the remote control for these operations. 1 Press BALANCE. 2 Press –/L or +/R to adjust the balance level. Press –/L to shift the sound to the left speaker . Press +/R to shift the sound toward the right speaker .
23 CA-EX90 Selecting a Source Select the input source to be played. From the front panel Press INPUT repeatedly . The name of the selected source appears in the display . Each press of INPUT switches the input source as shown below . • When the TUNER source is selected, the display shows the frequency of the last received radio station.
24 CA-EX90 Manual and Automatic T uning This section shows you how to tune in an FM or AM broadcast. From the front panel 1 Press BAND to select the band you desire (FM or AM).
25 CA-EX90 From the remote control 1 Press TUNER to select the band you desire (FM or AM). In addition to selecting the FM band, this operation also sets the remote control to tuner operation mode.
26 CA-EX90 Presetting Stations Once stations are preset, they can be called up quickly with preset tuning. Y ou can preset a total of 40 stations, either FM or AM. 1 T une in the station you want to preset. Use the buttons on the remote control to tune in the station; otherwise, following operation will not be possible.
27 CA-EX90 Listening to Preset Stations This section explains how to tune in preset stations. From the front panel 1 Press KEY MODE so that “PRESET” appears in the display . 2 Press > (for higher numbers) or < (for lower numbers) repeatedly to select the preset you desire.
28 CA-EX90 Loading CDs The CD player’ s unique 3 disc changer mechanism houses 3 individual disc trays inside the main tray . 1 Press 0 (open) for the disc tray (CD 1to 3) you want to load. The main tray opens to the selected disc tray . The disc tray number and “OPEN” appear in the display .
29 CA-EX90 Basic Operations The following operations play all 3 CDs once, one after another . 1 Load CDs. See “Loading CDs” on page 28. 2 Press CD 1, CD 2 or CD 3 for the disc you want to play . The amplifier/tuner automatically switches to the CD input and the CD starts to play .
30 CA-EX90 T o exchange CDs during playback of another Press 0 corresponding to a disc number not shown in the display to open that disc tray and exchange the CD. When CDs are exchanged during playback, playback stops after playing the last exchanged CD.
31 CA-EX90 PROGRAM RANDOM Program Play Mode This play mode lets you play tracks from up to 3 CDs in the order you desire. 1 Load CDs. See “Loading CDs” on page 28. 2 Press PLA Y MODE repeatedly to select PROGRAM. “PROGRAM” appears in the display and the PROGRAM indicator lights up.
32 CA-EX90 4 Press ‹ / 8 to start program playback. Program playback stops automatically after playing all the programmed tracks. T o check the programmed tracks Press 4 or ¢ on the remote control during stop mode. Pressing ¢ shows programmed track numbers in the programmed order .
33 CA-EX90 PROGRAM RANDOM Random Play Mode This play mode lets you play tracks from up to 3 CDs at random. Y ou can enjoy listening to the tracks in a different order each time. 1 Load CDs. See “Loading CDs” on page 28. 2 Press PLA Y MODE repeatedly to select RANDOM.
34 CA-EX90 REPEAT 1 CD REPEAT ALL REPEAT 1 Repeat Play Mode This play mode lets you repeat the current track, the current CD, or all the tracks on all the CDs. 1 Press REPEA T repeatedly to select the repeat mode. Each time you press REPEA T , the repeat modes switch as follows: REPEA T ALL Repeats all the tracks on all CDs.
35 CA-EX90 Introduction This unit incorporates three different timers. Use the remote control for timer settings. The timer can also be used to operate the optional components are connected to this unit. T o operate the optional components using the timer , be sure Compu Link cables are connected between the COMPU LINK-3 jacks on each component.
36 CA-EX90 Daily T imer Use the remote control to set this timer . It can be set during either power ON or ST ANDBY . Be sure to set the clock before attempting this operation. 1 Press CLOCK/TIMER to display “DAIL Y”. 2 Press CLOCK/TIMER again. “ON” appears in the display .
37 CA-EX90 When CD is selected: 1 Press +/R or –/L repeatedly to select desired disc number , then press SET . 2 Press +/R or –/L repeatedly to select desired track number , then press SET .
38 CA-EX90 Recording T imer Use the remote control to set this timer . It can be set during either power ON or ST ANDBY . Be sure to set the clock before attempting this operation. 1 Press CLOCK/TIMER 3 times to display “REC”. 2 Press CLOCK/TIMER again.
39 CA-EX90 6 Select the recording component (MD or T APE). Press +/R or –/L so that the desired component is blinking, then press SET . • The blinking component is selected. After SET is pressed, the display shows the start time, the end time, the source, and the volume settings.
40 CA-EX90 10 20 30 60 90 120 Sleep T imer Use the remote control to set this timer . 1 Start playing a source. 2 Press SLEEP repeatedly to set the timer . Each time you press SLEEP the timer changes as follows. Setting is complete when the SLEEP indicator stops blinking and lights steadily .
41 CA-EX90 STANDBY XM-EX90 MINIDISC RECORDER DISC LOADING MECHANISM INPUT CD REC REC LEVEL REC PAUSE /CANCEL SAMPLING RATE CONVERTER STANDBY TD-EX90 CASSETTE DECK CD REC REVERSE MODE DOLBY NR REC DOLB.
42 CA-EX90 Shortcut Playback (From the RX-EX90 Amplifier/tuner) By simply pressing INPUT of the amplifier/tuner (RX-EX90) to select an input source, the selected source component can automatically be turned on and its playback started. Playing CDs Press INPUT to select “CD”.
43 CA-EX90 Shortcut Playback (From a Source Component) By starting playback of a source component , the amplifier/tuner’ s input source is automatically switched to that source and playback can be monitored through it. If playback is started while the amplifier/tuner’ s power is in the ST ANDBY mode, it is also switched ON automatically .
44 CA-EX90 Remote Control of the Other Optional Components The remote control provided with the units can be used to control the optional components such as the CD player and cassette deck . Operate the remote control by pointing it to the remote sensor of the amplifier/tuner .
45 CA-EX90 Program playback of CD 1 While the CD player is in stop mode, press PLA Y MODE of the CD player to “PROGRAM”. 2 Specify the disc number . Press one of CD1, CD 2 and CD 3. 3 Specify a track number using the number buttons. Specify while the display is blinking (for 4 sec.
46 CA-EX90 Synchronized Recording When recording CD audio onto an MD, CD audio onto a cassette tape or MD audio on a cassette tape, the recording operation can be synchronized with the playback operation. Recording CD audio onto an MD (1: Recording the digital input from the CD player) 1 Prepare the MD recorder .
47 CA-EX90 Recording CD audio onto a cassette tape (1) 1 Prepare the cassette deck. Load a tape for use in recording in the cassette deck. 2 Prepare the CD player . Load the CD to be recorded in the CD player . Program tracks as required. 3 Press CD REC of the cassette deck.
48 CA-EX90 ACTION • Connect the power . • Refer to “Connections” and make sure all equipment is connected correctly . • Connect the speaker cords. • Disconnect the headphones. • T urn VOLUME to the right. • Make sure both speakers are connected with the correct polarity .
49 CA-EX90 SYMPTOM CD player Playback is not possible. Sound is intermittent. No sound. Disc tray does not open. CD player does not respond. ACTION • Load a disc (see page 28). • Load the disc so that the label side faces up in the disc tray . • Load the disc so that it lies flat in the disc tray (see page 28).
50 CA-EX90 Amplifier/tuner (RX-EX90) Output Po wer 20 watts per channel, min. RMS, both channels driv en, into 6 ohms from 70 Hz to 20 kHz, with no more than 0.
51 CA-EX90 CD Player (XL-EX90) CD Capacity 3 CDs Dynamic Range 95 dB Signal-T o-Noise Ratio 100 dB W o w And Flutter Unmeasurable General Dimensions 200 × 80 × 310 mm (W/H/D) (7-3/16 × 3-3/16 × 12-1/4 inches) Mass 2.
52 CA-EX90 Sophisticated electronic products may require occasional service. Just as quality is a keyword in the engineering and production of the wide array of JVC products, service is the key to maintaining the high level of performance for which JVC is world famous.
53 CA-EX90 LIMITED W ARRANTY A UDIO-1 JVC COMPANY OF AMERICA warrants this product and all parts thereof, except as set forth below ONLY TO THE ORIGINAL PURCHASER AT RETAIL to be FREE FROM DEFECTIVE MATERIAL AND WORKMANSHIP from the date of original retail purchase for the period as shown below.
VICTOR COMP ANY OF JAP AN , LIMITED J V C 0598TTMWSTOZK EN. .CA-EX90[J]-1 98.6.8, 9:15 AM 2.
Un punto importante, dopo l’acquisto del dispositivo (o anche prima di acquisto) è quello di leggere il manuale. Dobbiamo farlo per diversi motivi semplici:
Se non hai ancora comprato il JVC RX-EX90 è un buon momento per familiarizzare con i dati di base del prodotto. Prime consultare le pagine iniziali del manuale d’uso, che si trova al di sopra. Dovresti trovare lì i dati tecnici più importanti del JVC RX-EX90 - in questo modo è possibile verificare se l’apparecchio soddisfa le tue esigenze. Esplorando le pagine segenti del manuali d’uso JVC RX-EX90 imparerai tutte le caratteristiche del prodotto e le informazioni sul suo funzionamento. Le informazioni sul JVC RX-EX90 ti aiuteranno sicuramente a prendere una decisione relativa all’acquisto.
In una situazione in cui hai già il JVC RX-EX90, ma non hai ancora letto il manuale d’uso, dovresti farlo per le ragioni sopra descritte. Saprai quindi se hai correttamente usato le funzioni disponibili, e se hai commesso errori che possono ridurre la durata di vita del JVC RX-EX90.
Tuttavia, uno dei ruoli più importanti per l’utente svolti dal manuale d’uso è quello di aiutare a risolvere i problemi con il JVC RX-EX90. Quasi sempre, ci troverai Troubleshooting, cioè i guasti più frequenti e malfunzionamenti del dispositivo JVC RX-EX90 insieme con le istruzioni su come risolverli. Anche se non si riesci a risolvere il problema, il manuale d’uso ti mostrerà il percorso di ulteriori procedimenti – il contatto con il centro servizio clienti o il servizio più vicino.
