Manuale d’uso / di manutenzione del prodotto GY-HM650U del fabbricante JVC
Vai alla pagina of 168
. HD MEMORY CARD CAMERA RECORDER GY HM650U/GY HM650E INSTRUCTIONS . T IM E C O D E The specifications and appearance of this product are subject to changes for further improvement without prior notice.
. 1. Read these instructions. 2. K eep these instructions. IMPORT ANT SAFEGU ARDS 4. F ollow all instructions. 5. Do not use this apparatus near water . 6. Clean only with dr y cloth. 7. Do not bloc k any v entilation openings . Install in accordance with the manufacturer’ s instructions.
Safety Precautions . CA UTION FOR USA AND CANAD A CA UTION: T O REDUCE THE RISK OF ELECTRIC SHOCK. DO NO T REMO VE COVER (OR BA CK). NO USER-SER VICEABLE P AR TS INSIDE.
. POUR CANAD A RISQUE D’ELECTROCUTION NE P AS OUVRIR CA UTION: The mains plug shall remain readily operab le. Remov e the mains plug immediately if the camera functions abnormally .
. When the equipment is installed in a cabinet or on a shelf , make sure that it has sufficient space on all sides to allow f or ventilation (10 cm (3-15/16 " ) or more on both sides, on top and at the rear). Do not bloc k the v entilation holes.
. IMPORT ANT (for o wners in the U. K . ) Connection to the mains supply in the United Kingdom. DO NO T cut off the mains plug from this equipment. If the plug fitted is not suitable f or the power po.
. Dear Customer , This apparatus is in conf ormance with the valid European directiv es and standards regarding electromagnetic compatibility and electrical safety .
. Battery Pac k The supplied batter y pack is a lithium-ion batter y . Bef ore using the supplied batter y pack or an optional battery pack, be sure to read the f ollowing cautions: T o av oid hazar ds ... do not bur n . When transpor ting, carr y the batter y in a plastic bag.
9 Introduction ISSUED 2012/11/08.
Contents Introduction Safety Precautions ............................................ 3 Contents .......................................................... 10 Main Features ................................................. 12 Precautions for Proper Use .
LCD/VF Menu ................................................ 103 Shooting Assist Item .................................. 103 Marker Settings Item .................................. 104 Display Settings Item .
Main Features F11 Sensitivity, 1/3 inch Full HD 3CMOS Sensors This camera recorder is equipped with three 1/3 inch 2.
Auto Focus/Optical Image Stabilizer The camera recorder is equipped with a face detection auto focus function that covers the entire screen. It can switch to manual focus as well.
How to use this manual Symbols used Caution : Describes precautions concerning the operation of this product. Memo : Describes reference information, such as functions and usage restrictions of this product.
Transportation Do not drop or hit this unit against a hard object when transporting. Power Saving When this unit is not in use, .
o We are not liable for any accidental loss of data stored on the SD card. Please back up any important data. o Make use of the SD card within the prescribed conditions of use.
About GPS o The GPS (Global Positioning System) satellites are managed by the Department of State of the U.
Operation Modes This camera recorder has four operation modes Camera mode, Media mode, USB mode and Remote Edit mode.
Operation Mode Description Camera Mode This is the camera shooting mode. The camera recorder starts up in Camera mode when the power is turned on. Camera images are output on the viewfinder and LCD monitor.
Names of Parts . SERVO MANU AL ZOOM R E C H E I J G D AC B K F F I X V AR O F F F O C U S A SSIS T /1 O IS/2 L O L U X /3 M E N U / T H U M B A E L E V E L F O C U S N D F I L T E R 1 /6 4 1 /.
. A U X I N P U T 2 I N P U T 1 D E V I C E A V A B A T T . R E L E A S E P O W E R / CH G B H D M I RE MOTE D C H D / S D S D I R E C H O S T W T REC HOLD IN OUT TC L M N O d R S T X Z a b c Q P U V Y W R [REC] Record Trigger Button Starts/stops recording.
Side Control Panel . ND FILTER FOCUS AE LEVEL MANU PUSH AUTO MENU/THUMB FOCUS ASSIST/1 OIS / 2 LOLUX / 3 1/64 1/16 1/4 OFF PRESET IRIS GAIN CANCEL L M H B A WHT BAL SHUTTER FULL AUTO MODE POWE.
R [OIS/2] Optical Image Stabilizer/User 2 Button For switching the image stabilizer feature mode ON or OFF. You can also use it as a user button by assigning a specific feature in the menu setting to this button.
LCD Monitor . MENU/THUMB CANCEL CH1 INT INPUT1 INPUT2 AUTO MANUAL CH2 INPUT2 MONITOR DISPLAY ST A TUS INPUT1 PEAKING LCD BRIGHT CH2 CH1 LINE MIC MIC +48V CH1 BOTH CH2 B C H I A D F G E J K L N M A.
Lens Section . E CD A B A Filter Built In Screw Transparent or UV filter for lens protection, or filters for various effects can be installed. Installable filter types: Φ 72mmP0.
Basic System Diagram . Wireless Microphone Receiv er RCA Pin AV C a b l e HDMI Cable [AU X] [TC] Carrying Case T ripod SDHC/SDX C Memory Card SDHC/SDX C Card Reader USB Cable Battery AC A dapt.
Settings and Adjustments Before Use . Adjusting the Grip Belt Open the pad and adjust the position of the grip belt accordingly. . A U X I N P U T 2 I N P U T 1 D E V I C E A V A B A TT .
Opening/Closing the Lens Cover Use the lens cover open/close switch to open or close the lens cover.
Hold down the lock button (blue) at the center of the [POWER ON/OFF(CHG)] switch to set to “OFF(CHG)”. Attach the supplied battery. Slide it in until you hear a click.
Using AC Power (DC IN Power) Use the supplied AC adapter to operate the camera recorder with AC power. . 1 MODE POWER ON OFF (CHG) 2 Connect the DC cable of the AC adapter to the [DC] terminal of the camera recorder.
Warnings by Lamp and Warning Tone Warning status is indicated by tally lamp and warning tone. The tally lamp blinks. The warning tone is output from the monitor speaker or [ + ] terminal.
Initial Settings When the power is first turned on, the Initial Setting screen for performing the initial settings in the camera recorder appears. Set the date/time of the built in clock in the [Initial Setting] screen.
Memo : The [Initial Setting] screen appears when the power is turned on for the first time and when the power is turned on after the built in battery is fully discharged.
Displays on the LCD Monitor and Viewfinder You can display the camera status, media information, zebra pattern, and various markers in the video image on the LCD monitor and viewfinder screen during shooting.
Status Screen This screen allows you to check the current settings. To display the status screen, press the [STATUS] button in the normal screen. The status display differs according to the operation mode (two types).
Adjusting the LCD Monitor and Viewfinder You can monitor video images on this camera recorder using the viewfinder, LCD monitor, or both.
Adjusting the Contour Use the [PEAKING +/ − ] button to adjust the contour of the LCD monitor. (The contour of the viewfinder screen will also be adjusted at the same time.
Displaying in Black and White You can display the viewfinder screen in black and white. [Main Menu] - [LCD/VF] - [VF Color] item - Press Set button ( R ) - Select “Off” - Press Set button ( R ).
SD Card This camera recorder saves the recorded images and audio sound on the SD card (sold separately) in the card slot. Usable Cards Use a Class 6/10 SD card.
Inserting an SD Card This camera recorder comes with two card slots (Slot A and B) for video/audio recording and playback. . 1 2 3 1 A B 2 Open the SD card cover. Insert an SD card with the notched corner pointing up.
Switching the SD cards When both card slots are inserted with SD cards, you can use the [SLOT A/B] button to switch the card to use.
Formatting is complete. When formatting is complete, “Complete” appears and the camera recorder returns to the [Format Media] screen. Memo : During formatting, menu operation is unavailable but you can start recording.
Clips Recorded to SD Cards Folders in the SD Card Images captured are recorded to the [PRIVATE] folder inside the SD card.
Basic Shooting Procedures Preparations . 3 1 MODE POWER ON OFF (CHG) 4 2 4 Supply battery or AC adapter power to the camera recorder. ( ' P28 [Power Supply] ) Insert an SD card.
Selecting System Definition, File Format and Video Format You can select the resolution of the recorded videos (HD, SD, or Web), file format for recording/ playback, and the video recording format on this camera recorder.
List of Formats The following is a list of file formats and video formats that can be selected on this camera recorder.
Zoom Operation Adjusts the angle of view. Zoom ratio: 1x to 23x (optical zoom only) Zooming can be operated using any of the three levers/rings below.
Using Zoom Ring at the Lens Section Set the [ZOOM SERVO/MANUAL] switch to “MANUAL”. You can adjust the preferred angle of view by turning the zoom ring.
Adjusting Focus Automatically Set the [FOCUS AUTO/MANU/ ∞ ] switch to “AUTO”. The auto focus icon # appears on the screen.
Adjusting the Focusing by Face Detection This function detects human faces and automatically adjusts focus during Auto Focus. It can also track moving objects. When several faces are detected, you can select one to focus on.
. Detection F rame (Blue) Detection F rame (Orange) Press the Set button ( R ) to confirm the person for face detection. Memo : Press the [CANCEL] button to cancel the selection.
Adjusting the Iris You can adjust the aperture of the lens iris manually or automatically according to the brightness of the object.
Setting the Gain This function electrically boosts the light sensitivity when there is insufficient illumination on the object. You can set the gain of the video amplifier according to the brightness of the object.
Setting the Electronic Shutter You can change the shutter speed (time for each shooting frame) using the electronic shutter function. Electronic shutter can be adjusted manually or automatically.
During Variable Frame Rec . 720/30p, 720/24p, 1080/30p, 1080/24p 60, 30, 15 54, 27 50, 25 48, 24, 12, 6 45, 22.5 40, 20, 10 36, 18 32, 2 J ON ^^ ^ ^ ^ ^ ^ 1/10000 ^^ ^ ^ ^ ^ 1/10000 1/4000.
Automatic Shutter Mode (Automatic Shutter Adjustment) Press the [SHUTTER] button or set the [FULL AUTO] switch to “ON” to enter Automatic Shutter mode. The icon appears on the screen.
Preset Mode (PRESET) Two different color temperature settings are registered on this camera recorder. You can switch between them using the [ , ] button.
. A UTO WHITE A OK A UTO WHITE A OPERA TION Result Displa y [A WB] Activ ating White Detection Fra me Caution : Do not use highly reflective objects, such as metals. Doing so may result in improper white balance adjustment.
Automatic White Balance Mode (FAW: Fulltime Auto White balance) Press the [WHT BAL] button on the side control panel to enter into Automatic White Balance mode. “<FAW>” appears on the screen.
Audio Recording You can record audio from the two channels (CH1/ CH2) in synchronization with video images on this camera recorder. Select from the four options below to record the audio.
Adjusting Audio Recording Level You can select to adjust the audio recording levels for the two channels (CH1/CH2) manually or automatically.
Monitoring Audio Sound During Recording Using a Headphone You can check the recorded audio using headphone. . A U X MONITOR CH1 BOTH CH2 3 1 2 Connect the headphone. Select the channel to monitor with the [MONITOR] selection switch.
Time Code and User’s Bit Time code and user’s bit data are recorded with the video in this camera recorder. The time code and user’s bit are displayed on the viewfinder and LCD monitor during playback or recording.
Setting Time Code Generator Presetting the Time Code Time code and user’s bit data generated from the internal time code generator are recorded. This section describes how to set [TC/UB] - [TC Preset].
Set the time code (hour, minute, second, frame). Use the cross shaped button ( HI ) to place the cursor at the item to set, then use the cross shaped button ( JK ) to change the values.
Setting Time Code without Opening the Menu . AE LEVEL MENU/THUMB CANCEL MENU/THUMB CANCEL FOCUS ASSIST/1 OIS / 2 TIME CODE Memo : Settings cannot be made in the following cases. [TC/UB] - [TC Generator] has been set to “Regen”.
Synchronizing Time Code on Another Camera This camera recorder is equipped with a time code input/output terminal ([TC] terminal). Connect another camera recorder to the [TC] terminal and synchronize to the time code.
Setting Zebra Pattern When the luminance level range for displaying zebra patterns is specified, diagonal lines (zebra pattern) are displayed at areas with the specified luminance levels during shooting.
Item Settings Color of Frame Indicating the Position Max & Min Displays the brightness (%) and positions of the brightest and darkest areas in the screen. Frames may also be stopped at the current positions.
When [Manual] is selected A The brightness of the cursor position is displayed when the button is pressed. . P 13000K P 13000K 1/100 1/100 F1.6 F1.6 0dB 0dB AE+6 AE+6 ND 1/64 ND 1/64 12:34:56 12:34:56 Jan 24,2012 Jan 24,2012 00:00:00.
Memo : If positioning cannot be performed after waiting for several minutes, this means GPS reception is poor, and there is difficulty in receiving data. Move to an open place with no obstructions.
Recording Simultaneously at Two Different Definitions By setting [System] to “HD+SD” or “HD+Web”, you can record simultaneously at two different definitions.
Dual Rec If both the slots are loaded with recordable cards in the factory default ([Slot Mode] is set to “Series”), pressing the [REC] button starts recording only to the media in the selected slot.
Caution : To perform recording in the Dual Rec mode, it is recommended that you start recording by making use of two cards with the same capacity and from the formatted state.
Set [Main Menu] - [System] - [Record Set] - [Slot Mode] to “Backup”. ( ' P114 [ Slot Mode ] ) “BACKUP” appears on the display screen. . P 13000K 1/1 0 0 F1 .
Stop backup recording. Select [STBY] in [Main Menu] - [System] - [Record Set] - [Slot Mode] - [Backup Rec] and press the Set button ( R ).
Set [Rec Mode] to “Pre Rec”. ( ' P113 [ Rec Mode ] ) Set [Main Menu] - [System] - [Record Set] - [Rec Mode] to “Pre Rec”. The display changes (“ ST B Y ” - “STBY P ”).
Pause recording. Press the [REC] button again to pause recording. The display changes (“ R REC C ” - “STBY C ” (yellow text)). The card slot status indicator remains lighted in red.
Set [Rec Mode] to “Frame Rec”. Set [Main Menu] - [System] - [Record Set] - [Rec Mode] to “Frame Rec”. ( ' P113 [ Rec Mode ] ) The display changes (“STBY” - “STBY ”).
Set the time interval to start recording in [Interval Rec]. Set using [Main Menu] - [System] - [Record Set] - [Rec Mode] - [Rec Interval]. ( ' P113 [ Rec Interval ] ) Start recording.
Variable Frame Rec Shooting in this mode allows you to obtain smooth slow motion or quick motion videos.
Playing Recorded Clips To play back clips recorded on SD cards, switch to the Media mode. Press and hold the [MODE] selection button in Camera mode to enter Media mode.
Memo : Clips appended with OK marks cannot be deleted on the camera recorder. When [Main Menu] - [System] - [Record Set].
Detailed screen *I t e m s that are common with the Standard screen will not be described. Refer to “[Standard screen] P 82”. . C B A A Thumbnail Thumbnail of the clip selected by the cursor.
Item Description FTP Upload Uploads a clip to the FTP server. This Clip: Uploads the clip pointed by the cursor. Selected Clips: Uploads the clips selected (appended with check mark).
Playing back Use the operation buttons on the side control panel of the camera recorder to play back. . AE LEVEL MENU/THUMB CANCEL A C B A IW Button Plays back/pauses the clip pointed by the cursor.
Deleting Clips Delete clip. . OIS / 2 LOLUX / 3 AE LEVEL MENU/THUMB CANCEL MENU/THUMB CANCEL Memo : Clips appended with OK marks cannot be deleted on the camera recorder. Read only clips can be deleted on a PC.
Appending/Deleting OK Mark You can append OK marks to the clips for important scenes. Clips appended with OK marks cannot be deleted, thus protecting the important clips.
Selecting and Performing Operations on Multiple Clips Multiple clips can be selected during thumbnail screen or playback screen display.
Press the Set button ( R ) to confirm the range. The check marks change from magenta to green. Pressing the [LOLUX/3] button while the multiple clips are selected displays the action selection screen.
Basic Operations in Menu Screen Press the [MENU/THUMB] button on the side control panel of the camera recorder or on the LCD monitor to display the menu screen on the LCD monitor and viewfinder.
Display and Description of the Menu Screen Selecting Menu Items . H I F E B D G A C A Cursor Indicates the selected item.
Text Input with Software Keyboard Use the software keyboard to enter the [Scene File]/[Picture File] subname, [Clip Name Prefix], and the settings under [Network] - [Settings].
Menu Screen Hierarchical Chart . Reset Process Re verse Picture Color Gain Adjust... Color Matrix White Balance... WDR Gamma White Clip Knee Black T oe Master Black Adjust.
Camera Function Menu Menu screen for specifying operation settings during shooting. This item can only be selected in the Camera mode. Bars For setting whether to output color bars.
ALC Limit For setting the maximum gain value of “ALC”, which electrically boosts the sensitivity level according to the brightness automatically.
User Switch Set Item USER1 USER7, LCD KEY ▲ /LCD KEY ▶ /LCD KEY ▼ /LCD KEY ◀ By assigning one of the following functions to each of the [FOCUS ASSIST/1], [OIS/2], [LOLUX/3], [AE LOCK/4], [ZEBRA/5], [MARKER/6], [C.
Hysteresis For setting the margin to maintain status when the face that is being tracked is lost. Set to “Fast” to select another object immediately if the face on the screen is lost.
Compress Level Compression amount increases when a larger value is specified. [Setting Values: 1 to 5 ( R 3)] Memo : This item is displayed only when [Black Toe] is set to “Compress”.
Strong: Enhances the effect of gradation compensation for object with wide dynamic range due to outdoor or strong backlight conditions. Natural: Normal setting for wide dynamic range.
Memo : When [System] under [Record Format] is set to “SD”, this item is fixed at “Low”.
Clear Paint After AWB For specifying whether to clear the [AWB Paint ] (R value and B value) settings after executing AWB (Auto White Balance).
LCD/VF Menu Item for specifying settings related to the LCD monitor or viewfinder screen. This menu screen can be used to specif.
Type For specifying the operation when the [FOCUS ASSIST/1] button is pressed. ( ' P49 [Focus Assist Function] ) ACCU Focus: Enables the Focus Assist and ACCU Focus (forced focus) functions.
Safety Zone For setting the percentage of area that is to be deemed as valid area (Safety Zone) within the boundary of the aspect ratio selected in [Aspect Ratio].
Date/Time For specifying whether to display the date and time in the display on the LCD monitor and viewfinder screen.
HDMI Enhance For setting the color range of HDMI signals. When connecting to a PC monitor, set this to “On”. This item is selectable only when [HDMI/SDI Out] is set to “HDMI” or “HDMI+SDI”.
AGC Mode For setting whether to link the limiter operation of [CH1] and [CH2]. Select “Link” to link or “Separate” to separate.
Monitor For setting the audio sound of the [ + ] terminal to stereo or mixed sound when the [MONITOR] switch on the LCD monitor is set to “BOTH”.
Auto Power Off For setting whether to turn off the power automatically when the camera recorder is not operated for more than 5 minutes when the battery is used.
Time Zone For setting the UTC time difference in units of 30 minutes. [Setting Values: UTC 00:30 UTC 12:00, UTC, UTC+14:00 UTC+00:30.
Frame & Bit Rate For selecting the frame rate and encoding bit rate for recording to the SD card in slot A when [System] is set to “HD”, “HD+Web”, or “HD+SD”.
Rec Mode For selecting the record mode for recording to the SD card. ( ' P76 [Special Recording] ) The selectable options vary according to the [Record Format] menu settings.
Slot Mode For setting the operation of the card slot. Series: Mode that activates the two slots sequentially. Dual: Mode that activates the two slots at the same time.
Settings Item For specifying network related settings. The display of the software keyboard for input varies according to the item you are setting.
Clip Server For setting the server and directory for uploading recorded clips in the SD card to the FTP server.
Adding/Editing Frequently Used Menu Items (Favorites Menu) You can select and add/edit frequently used menu items freely to create a personal menu screen (Favorites Menu). Memo : [Favorites Menu] is only enabled in the Camera mode.
Editing Favorites Menu You can delete or change the order of the items added to [Favorites Menu]. Deleting Items from [Favorites Menu] Open the [Favorites Menu] screen.
Changing the Order of Items in [Favorites Menu] . AE LEVEL MENU/THUMB CANCEL FOCUS ASSIST/1 OIS / 2 TIME CODE MENU/THUMB CANCEL DISPLA Y Open the [Favorites Menu] screen. A Press the [MENU] button to open the [Favorites Menu] screen.
Press the [FOCUS ASSIST/1] button. The option menu to exit the [Favorites Menu] editing mode appears. Select [Save & Exit] and press the Set button ( R ). .
A OK Mark Displayed when OK mark has been appended. ( ' P88 [Appending/Deleting OK Mark] ) B Voltage/Battery Power Displays the current status of the power supply in use.
I Volume Operation Indicator Displayed when there are changes made to the volume of the headphone, speaker (0 to 15), and the values of LCD BRIGHT, PEAKING ( 10 to +10).
Q ND Filter Position Displays the current ND filter position. Memo : This item is not displayed when [Main Menu ] - [LCD/VF] - [Display Settings] - [ND Filter] is set to “Off”.
X Time Code ( )/User’s Bit ( ) Display Displays the time code (hour: minute: second: frame) or user’s bit data. Example of time code display: . 00:00:00:00 ※ * Colon (:) denotes non drop frames and dot (.
Display Screen in Media Mode Media Display 0 Screen This screen displays the media status or event.
H Information Display Use the [AE LOCK/4 ] button to switch between camera information display, GPS display and turning off the display.
Status Screen For checking the settings of the camera recorder. Camera Information Screen For checking information related to shooting using the camera recorder.
Marker and Safety Zone Displays (Camera Mode Only) The marker and safety zone displays are useful in helping you determine the angle of view for the image according to the shooting purpose.
Adjusting Color Matrix The color matrix of the camera recorder can be adjusted to a color of the user’s preference.
Configuring Setup Files The menu settings can be stored on the camera recorder or an SD card by saving them as a setup file. Loading a saved setup file enables you to reproduce the appropriate setup state speedily.
Select [Store] and press the Set button ( R ). . 6 5 Save the file. A confirmation screen appears when you choose to overwrite. Select [Overwrite] on the confirmation screen, and press the Set button ( R ).
Deleting Setup Files Display the [Setup File] menu. Select [Main Menu] - [System] - [Setup File] and press the Set button ( R ). ( ' P109 [ Setup File ] ) Select [Delete File] and press the Set button ( R ).
Select [Change] using the cross shaped button ( JK ), and press the Set button ( R ). The camera recorder switches to USB mode.
Connecting External Monitor To output live or playback video images and audio sound to an external monitor, select the output signal.
Connecting via SDI Digital video signals, together with embedded (superimposed) audio signals and time code signals, are output for both the HD SDI and SD SDI signals.
Connecting Wired Remote Control The functions of the camera recorder can be configured using a wired remote control.
Preparing Network Connection Operating Environment Computer o CPU Core 2 Duo 2.4 GHz or higher o Memory 2 GB or higher o Display 1024x768 or.
Connecting via Wireless LAN Connection via Access Point Perform setting on the camera recorder, and start up the [Wizard] screen. ( ' P137 [Camera Setup for Network Connection] ) [Wireless LAN] appears on the [Wizard] screen.
. Select [SSID] from the list of access points (smartphone, tablet terminal, PC, etc.), and enter [Passphrase].
Connecting via 3G Adapter You can make use of the FTP function by connecting a USB Cellular adapter to this camera recorder. Connect the USB Cellular adapter to the [HOST] terminal of the camera recorder.
Configuring the Server for Downloading For specifying the settings for connecting to the FTP server for downloading the metadata (domain name, user name, password, etc.
Select [Import] on the confirmation screen, and press the Set button ( R ). Import starts. After import is complete, the display is restored to the screen before the [Import Metadata] screen appears.
Move the cursor to the clip to be uploaded. Move the cursor to the clip to be uploaded using the cross shaped button ( JKH I ). . 2 Press the [LOLUX/3] button.
Upload starts. The status of the transfer process is indicated by a progress bar. . Memo : To stop uploading, press the Set button ( R ).
Enter the user name and password. Enter the user name (prohd) and the password (initial password: 0000) on the login screen to display the main page of the camera.
Editing Metadata A Enter information for the necessary fields. B After input is complete, tap (click) [Save] to overwrite the metadata. . A B K eyboard Tap (click) [OK] on the confirmation screen.
Memo : When the menu or status is displayed, display of the confirmation screen will be put on hold. If the menu is displayed on the camera recorder, close the menu.
Tap (click) [OK] on the confirmation screen. Update of the metadata starts. After update is complete, “Renewal of clip metadata is succeeded.” is displayed.
A Page Switch Tab Tap (click) this tab to move to the [Planning Metadata], [Clip Metadata], or [Settings] screen.
In the same way, register [B] and [C]. After all three positions A, B and C are registered, the positions of the [A].
Configuring Settings via a Browser You can change the network related settings by accessing via a browser on devices such as a smartphone, tablet terminal, or PC. Access the main page of the camera.
Changing View Remote Function Settings For performing setting for using the View Remote function. . A B C A [Camera Name] For setting the name that appears at the top left of the view screen.
D Settings on the [Select Setup Type] Screen . E E Settings on the [IP Address Configuration] Screen When “DHCP” is selected, all items will be grayed out.
Changing Clip Server Settings You can make direct changes to the server and directory settings that are specified in [Clip Server] on the camera recorder for uploading recorded clips in the SD card to the FTP server.
Saving the Connection Settings File Select [Main Menu] - [System] - [Network] - [Settings] - [Connection Setup] and press the Set button ( R ). Select [Store] and press the Set button ( R ).
Reading the Connection Settings File Select [Main Menu] - [System] - [Network] - [Settings] - [Connection Setup] and press the Set button ( R ). Select [Load] and press the Set button ( R ).
Error Messages and Actions Warning display on the LCD monitor and viewfinder screen, tally lamp indication and warning tone are as follows according to the error status.
Error Message Status Action Display Screen Thumbnail Screen Dedicated Screen LOST MEDIA INFO [*] − Card is removed while recording is in progress. Card is removed while formatting is in progress.
List of FTP Transfer Errors If the upload of a recorded clip or download of the metadata setup file (XML format) is not successfully completed, the following errors are displayed.
Error message Status Action Transfer Error. Transfer failed due to communication failure. Execute again. Invalid URL. The path was deemed invalid by the FTP server. Adjust the Server and Port settings for [Metadata Server] or [Clip Server].
Troubleshooting Symptom Action Power does not turn on. Is the AC adapter properly connected? Is the battery charged? Is the power .
Symptom Action The time code and user’s bit are not displayed. Even in Camera mode or Media mode, the time code and user’s bit may not be displayed depending to the type of display.
Specifications General Item Description Power DC 12 V Power consumption Approx. 13.0 W (during recording with backlight set to [STANDARD] while the viewfinder is in use) Mass Approx.
Video/Audio Item Description Recording time Approx. 25 minutes (8 GB SD card, 35 Mbps, VBR mode) HD mode (MOV/MP4/MXF: MPEG 2) Video recordi.
Dimensional Outline Drawing (Unit: mm) . 269.5 57 345.5 402.5 415.5 178 197 140 156.5 177.5 148.5 (HOOD) * The specifications and appearance of this product are subject to changes for further improvement without prior notice.
Index A AC adapter .......................................... 29, 30 Access point ............................................ 138 Action ........................................................ 84 Aspect ratio .
Video format .............................................. 45 View remote ............................................. 148 Viewfinder ................................ 17, 30, 34, 37 W Warning .........
. GY HM650U/GY HM650E HD MEMORY CARD CAMERA RECORDER © 2012 JVC KENWOOD Corporation LST1428 001A ISSUED 2012/11/08.
Un punto importante, dopo l’acquisto del dispositivo (o anche prima di acquisto) è quello di leggere il manuale. Dobbiamo farlo per diversi motivi semplici:
Se non hai ancora comprato il JVC GY-HM650U è un buon momento per familiarizzare con i dati di base del prodotto. Prime consultare le pagine iniziali del manuale d’uso, che si trova al di sopra. Dovresti trovare lì i dati tecnici più importanti del JVC GY-HM650U - in questo modo è possibile verificare se l’apparecchio soddisfa le tue esigenze. Esplorando le pagine segenti del manuali d’uso JVC GY-HM650U imparerai tutte le caratteristiche del prodotto e le informazioni sul suo funzionamento. Le informazioni sul JVC GY-HM650U ti aiuteranno sicuramente a prendere una decisione relativa all’acquisto.
In una situazione in cui hai già il JVC GY-HM650U, ma non hai ancora letto il manuale d’uso, dovresti farlo per le ragioni sopra descritte. Saprai quindi se hai correttamente usato le funzioni disponibili, e se hai commesso errori che possono ridurre la durata di vita del JVC GY-HM650U.
Tuttavia, uno dei ruoli più importanti per l’utente svolti dal manuale d’uso è quello di aiutare a risolvere i problemi con il JVC GY-HM650U. Quasi sempre, ci troverai Troubleshooting, cioè i guasti più frequenti e malfunzionamenti del dispositivo JVC GY-HM650U insieme con le istruzioni su come risolverli. Anche se non si riesci a risolvere il problema, il manuale d’uso ti mostrerà il percorso di ulteriori procedimenti – il contatto con il centro servizio clienti o il servizio più vicino.