Manuale d’uso / di manutenzione del prodotto GY-DV5000 del fabbricante JVC
Vai alla pagina of 97
INTRODUCTION CONTROLS, INDICA T ORS AND CONNECTORS BASIC SYSTEM CONNECTIONS AND ADJUSTMENTS POWER SUPPL Y PREP ARA TIONS SETTING AND ADJUSTMENTS BEFORE SHOOTING SHOOTING OPERA TION PLA YBACK MODE USIN.
E-2 Thank you for purchasing the JVC GY -DV5000/GY -DV5001 DV Camcorder . These instructions are for the GY -DV5000E and GY -DV5001E. The text mainly deals with the GY -DV5000E. Explanations concerning unique GY -DV5001E functions are set off by the (GY -DV5001 only) notice.
E-3 SAFETY PRECAUTIONS NOTE: The rating plate (serial number plate) is on the top frame. W ARNING: T O REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS APPLIANCE T O RAIN OR MOISTURE. This unit should be used with 12V DC only . CAUTION: T o prevent electric shocks and fire hazards, do NOT use any other power source.
E-4 This unit is a DV video system format camcorder . Videocassettes marked with the symbol or symbol can be used. MAIN FEA TURES The following phenomena may occur when tapes recorded on other units (including another GY -DV5000) are recorded or played back on this camcorder .
E-5 CONTENTS INTRODUCTION MAIN FEA TURES ............................................................... 4 1. INTRODUCTION 1-1 Precautions for Proper Use ........................................ 6 1-2 Routine and Periodical Maintenance ...............
E-6 1. INTRODUCTION ● Do not insert an object other than a videocassette in the cassette insertion slot. Be sure to close the cassette cover when the unit is not to be used for a long period. ● Do not set the POWER switch to OFF or remove the power cable during recording or playback.
E-7 1. INTRODUCTION Head Cleaning ● T o maintain beautiful pictures and sound, be sure to use a head cleaning tape to clean the head periodically . (Read the “ Precautions for Use of Head Cleaning T ape ” .
E-8 1. INTRODUCTION The GY -DV5000 can use any of the following battery packs. ● Flat shape type ● Anton-Bauer battery pack: Trimpack 13/14 Series Magnum 13/14 Series Compack 13/14 Series Propack 13/14 Series * An Anton-Bauer battery pack cannot be connected directly to the camera.
E-9 1. INTRODUCTION Monitor screen Smear (Vertical pale streaking appearing at high luminous object) High luminous object (Electric light, sunlight, etc.
E-10 2. CONTROLS, INDICA TORS AND CONNECTORS 2-1 Front Section VF ZEBRA AUDIO LEVELE CH-1 OFF ON SKIN AREA AUTO WHITE ACCU FOCUS VTR 5 q w e r i u o !0 y t The provided microphone is a phantom microphone. Please confirm that the FRONT AUDIO INPUT switch is set to the +48V side when the provided microphone should be used.
E-11 2. CONTROLS, INDICA TORS AND CONNECTORS 8 [AUTO WHITE/ACCU FOCUS] switch White Balance: ● First, position a white object to occupy 80% of the centre of the screen. ● When the WHT .BAL switch % on page 13 is set to A or B, setting this switch to the upper position ( “ AUTO WHITE ” ) will provide automatic adjustment for white balance.
E-12 2. CONTROLS, INDICA TORS AND CONNECTORS 1 [MONIT OR] Audio monitor volume control Adjusts the volume of the monitoring loudspeaker and earphone. 2 [EDIT SEARCH +/–] +/– button for edit search Pressing this button in the record-standby mode plays back the tape while the button is being pressed.
E-13 2. CONTROLS, INDICA TORS AND CONNECTORS 7 [BLACK] Black stretch/black compression switch Switches the gain for the dark section of the image. Set to an appropriate position depending on the video signal to be shot. STRETCH : By stretching the signal only for the dark section, contrast in the dark sections of the image is enhanced.
E-14 2. CONTROLS, INDICA TORS AND CONNECTORS 1 Monitoring speaker In the Camera mode, the input sound can be EE monitored. In the VTR mode, the speaker outputs the VTR playback sound. The sound to be output is selected with the MONITOR SELECT switch @ .
E-15 2. CONTROLS, INDICA TORS AND CONNECTORS MONITOR EDITSEARCH FILTER STATUS SHUTTER MENU AUTO IRIS BACK L NORMAL SPOT L STRETCH NORMAL COMPRESS FULL AUTO BLACK LOLUX MODE POWER ON OFF VTR OPEN VTR CAM 1 3200K 5600K 5600K 5600K ND / / ND 2 .
E-16 2. CONTROLS, INDICA TORS AND CONNECTORS PUSH LINE OUT Y/C OUT CH-1 CH-2 MONITOR OUT FRONT AUDIO IN LENS ew q r 2-3 Left Side Section 1 [MONIT OR OUT] Monitor output connector (BNC) ● Composite video signal output connector . Camera mode: The camera image is output.
E-17 2. CONTROLS, INDICA TORS AND CONNECTORS STILL STOP REW BLANK SEARCH FF PLAY w e q r !0 o y t u i 1 Cassette cover The cassette cover can be opened by sliding the OPEN knob 2 . Open this cover to insert or remove a videocassette from the unit. Normally , this cover should be closed.
E-18 2. CONTROLS, INDICA TORS AND CONNECTORS 2-5 Rear Section PUSH LINE OUT Y/C OUT CH-1 CH-2 MONITOR OUT PHONES DC OUT DC IN DV REAR AUDIO IN T ALL Y t re w y u q i o 1 [T ALL Y] T ally lamp This lamp lights up when the GY -DV5000 enters the record mode.
E-19 2. CONTROLS, INDICA TORS AND CONNECTORS MEMO: ● The volume of the alarm sound is set with the ALARM VR LEVEL item on the OTHERS (2/2) menu screen. ● When using a stereotype jack and stereo sound should be output, the following setting should be performed.
E-20 2. CONTROLS, INDICA TORS AND CONNECTORS 2-6 Indications on the LCD Monitor and in the V iewfinder OPEN CH-1 AUDIO INPUT AUDIO SELECT CH-2 CH-1 CH-2 FRONT REAR AUTO MANUAL AUDIO LEVEL CH-1 CH-2 PU.
E-21 2. CONTROLS, INDICA TORS AND CONNECTORS No. Item Contents 1 Indication of various function operations ACCU-FOCUS : Blinks during the ACCU-FOCUS operation. SKIN AREA : Blinks while the skin tone detail colour area is displayed. ALC : Displayed when ALC function alone is ON.
E-22 2. CONTROLS, INDICA TORS AND CONNECTORS ● Status 1 In addition to the information on the Status 0 screen, this screen displays the following items. No. Item Contents 0 T ime Code (TC)/User ’ s Bits (UB) indication Indicates the time code (h:m:s:frame) or user ’ s bits data.
E-23 2. CONTROLS, INDICA TORS AND CONNECTORS ● Status 3 This screen only displays date and time, event display and alarm indications. * Whether or not date and time should be displayed and the display style are set on the TIME/DA TE MENU screen.
E-24 2. CONTROLS, INDICA TORS AND CONNECTORS No. Item Contents 4 T ime/Date indication Recorded data are displayed during playback, fast forward, and rewind. (Only when the DA TE REC item is set to OFF ( ☞ See page 79)) During recording, the data from the DV connector is displayed.
E-25 2. CONTROLS, INDICA TORS AND CONNECTORS ■ Alarm Message Display ● The following alarm messages are displayed while the Status (0, 1, 3) screen is shown in the Camera mode, or a status screen is shown in the VTR mode. If an alarm is generated while the Status 2 screen is shown, the Status 0 screen returns to display the alarm.
E-26 2. CONTROLS, INDICA TORS AND CONNECTORS ■ Auto White Balance Indication (Camera mode only) TOP MENU screen (Camera mode) The AUT O WHITE indication and the result of the operation are displayed during the auto white balance adjustment operation.
E-27 2. CONTROLS, INDICA TORS AND CONNECTORS 7 IRIS mode switch A : Activates the auto iris feature. M : Allows manual iris control. 8 Momentary auto iris button When the IRIS MODE switch 7 is at “ M ” , pushing this button activates the Auto Iris Function while it is held down only .
E-28 2. CONTROLS, INDICA TORS AND CONNECTORS [VF-P1 15B] 4 5 6 1 2 3 7 9 8 1 Stopper screw This screw prevents the viewfinder from coming off the camera. 2 Mounting guide T o attach on the camera. 3 Connector Connect to the camera. 4 [CONT] contrast adjustment T o adjust the contours of the viewfinder image.
3. BASIC SYSTEM CONNECTIONS AND ADJUSTMENTS E-29 * For information on connection with the individual attachments, refer to the page explaining the respective connection methods. 3-1 Basic System VC-710 ( 5m ) ( BATTERY CHARGER ) AC POWER ADAPTER AA-P250 VIDEO LIGHT (ANTON BAUER.
3. BASIC SYSTEM CONNECTIONS AND ADJUSTMENTS E-30 3-2 Attaching the Zoom Lens CAUTION: 1. Loosen the mount ring. 2. Connect the cable connector . 3. Attach the lens with its pin aligned with the hole in the mount. 4. T ighten the mount ring. ● Be sure to tighten the mount ring completely .
3. BASIC SYSTEM CONNECTIONS AND ADJUSTMENTS E-31 When attaching the viewfinder for use with the left eye, the provided microphone cannot be attached. In this case, use the optional microphone holder KA-A50U and microphones MV -P615U/618U (phantom microphone).
3. BASIC SYSTEM CONNECTIONS AND ADJUSTMENTS E-32 3. Rear base mount 4. Front base mount 4. MONITOR EDITSEARCH FILTER STATUS SHUTTER MENU AUTO IRIS BACK L NORMAL SPOT L STRETCH NORMAL COMPRESS FULL AUTO BLACK LOLUX MODE POWER ON OFF VTR OPEN VTR CAM 1 3200K 5600K 5600K 5600K ND / / ND 2 .
4. POWER SUPPL Y E-33 ■ Flat shape type battery pack ■ Anton-Bauer battery pack ● Propack 13/14 Series ● T rimpack 13/14 Series ● Magnum 13/14 Series ● Compack 13/14 Series PHONES DC OUT DC IN DV REAR AUDIO IN TALL Y AA-P250 DC cable AC power adaptor The GY -DV5000 is operable with AC power supply or battery pack.
4. POWER SUPPL Y E-34 Using a Flat Shape T ype Battery Pack (optional) Attaching a Flat Shape T ype Battery Pack Be sure to set the POWER switch to OFF before replacing the battery pack. 1. Open the battery case cover while pushing the lock release lever .
4. POWER SUPPL Y E-35 4. 5. 5. 4. Connect the connectors protruding from the GY -DV5000 with the connectors on the battery holder . 5. Secure the battery holder to the GY -DV5000 with the four mount screws provided with the battery holder .
4. POWER SUPPL Y E-36 REMAINING BA TTERY POWER DISPLA Y After the remaining battery power warnings appear , the GY -DV5000 automatically stops operation if the battery power operation is continued.
E-37 5. PREP ARA TIONS MONITOR EDITSEARCH FILTER STATUS SHUTTER MENU AUTO IRIS BACK L NORMAL SPOT L STRETCH NORMAL COMPRESS FULL AUTO BLACK LOLUX MODE POWER ON OFF VTR OPEN VTR CAM 1 3200K 5600K 5600K 5600K ND / / ND 2 .
E-38 5. PREP ARA TIONS ● A cassette cannot be loaded or unloaded while the GY -DV5000 is in POWER OFF mode. ● Use a standard DV videocassette or a MiniDV videocassette. ● Press at the center portion of the cassette back and insert the cassette tape straight into the slot.
E-39 5. PREP ARA TIONS Unloading the Cassette 1. Set the POWER switch to ON. 2. Slide the OPEN knob to the side to open the cassette cover . 3. Press the EJECT button. T ape ejection starts. MEMO: ● It takes a few seconds before the cassette is ejected after the EJECT button is pressed.
E-40 5. PREP ARA TIONS ––– LCD/VF(2/2) ––– TAPE REMAIN ON TC/UB ON AUDIO ON LCD COLOR NORMAL LCD PEAKINGS NORMAL PAGE BACK The LCD monitor ’ s orientation, angle, and brightness, etc. can be changed. ■ Opening the LCD monitor Slide the LCD lock and release knob toward the rear section to open the LCD monitor .
E-41 5. PREP ARA TIONS 5-4 Setting, Displaying and Recording the Date and T ime The date and time of the built-in clock should be set. Powered by the built-in backup battery the set date and time data continue to count even when the power is switched off.
E-42 5. PREP ARA TIONS ––– TIME/DATE ––– DISPLAY ON DISPLAY MODE BARS+CAM DATE REC OFF DISPLAY STYLE DATE+TIME DATE STYLE DD/MM/YY TIME STYLE 24HOUR SEC DISPLAY ON CLOCK ADJUST.. PAGE BACK ––– CLOCK ADJUST ––– DATE(DD/MM/YY) 12/12/02 TIME 09:33 PAGE BACK T ime (Hour:Min) 6.
E-43 5. PREP ARA TIONS Date Whether or not the time and date should be displayed on the screen and how to display them are set on the TIME/DA TE menu screen. 1. Display the TIME/DA TE menu screen. 1 Select the TC/UB/CLOCK item on the TOP MENU screen. 2 Select the TIME/DA TE item on the TC/UB/CLOCK menu screen.
E-44 5. PREP ARA TIONS 5-5 Charging the Built-in Battery The built-in, rechargeable backup battery retains the date and time and the time code data. The built-in battery is constantly being charge whenever the GY -DV5000 is connected to a power supply , but it gradually discharges while the GY -DV5000 is disconnected from a power supply .
6. SETTING AND ADJUSTMENTS BEFORE SHOOTING E-45 MONITOR EDITSEARCH FILTER STATUS SHUTTER MENU AUTO IRIS BACK L NORMAL SPOT L STRETCH NORMAL COMPRESS FULL AUTO BLACK LOLUX MODE POWER ON OFF VTR OPEN VTR CAM 1 3200K 5600K 5600K 5600K ND / / ND 2 .
6. SETTING AND ADJUSTMENTS BEFORE SHOOTING E-46 3. 3. 2. 1. 1. 1. 12345678 White Yellow Cyan Green Magenta Red Blue Black 1. Adjust the position and angle of the viewfinder . 2. Diopter adjustment Rotate the eyepiece focusing ring until the viewfinder screen image is clearly visible.
6. SETTING AND ADJUSTMENTS BEFORE SHOOTING E-47 M RET WT A MACRO 4. 6. 5. 3. 1. 7. 8. 10. 2. 6-5 Back Focus Adjustment Siemens star chart It is only necessary to perform this when the lens is attached for the first time or when focusing is not correct in both the telephoto and wide-angle positions.
6. SETTING AND ADJUSTMENTS BEFORE SHOOTING E-48 T wo kinds of white balance adjustment results can be stored in memories AUTO1 and AUTO2. 䡲 Adjustment procedure 1. Set the following switches. ● Set the POWER switch to ON. ● Set the OUTPUT switch to CAM-AUT O KNEE.
6. SETTING AND ADJUSTMENTS BEFORE SHOOTING E-49 MONITOR EDITSEARCH FILTER STATUS SHUTTER MENU AUTO IRIS BACK L NORMAL SPOT L STRETCH NORMAL COMPRESS FULL AUTO BLACK LOLUX MODE POWER ON OFF VTR OPEN VTR CAM 1 3200K 5600K 5600K 5600K ND / / ND 2 .
6. SETTING AND ADJUSTMENTS BEFORE SHOOTING E-50 00:00:00:00 20 min FAS –3dB FAW I SD FIL1 B F5 .6 4 8 k 12 .2V STBY 01/02/03 AM 01:23:45 ∞ –26 –20 –15 –11 –7 –3 0dB OVER 6-8 Recording .
6. SETTING AND ADJUSTMENTS BEFORE SHOOTING E-51 The audio input during recording, in record-pause or stop mode can be monitored through the monitoring speaker or earphone. ● The monitoring audio is not output from the speaker while the PHONES jack is in use.
7. SHOOTING OPERA TION E-52 MONITOR EDITSEARCH FILTER STATUS SHUTTER MENU AUTO IRIS BACK L NORMAL SPOT L STRETCH NORMAL COMPRESS FULL AUTO BLACK LOLUX MODE POWER ON OFF VTR OPEN VTR CAM 1 3200K 5600K 5600K 5600K ND / / ND 2 .
E-53 7. SHOOTING OPERA TION 8. TALLY lamp 8. T o stop recording: Press the VTR trigger button on the unit or on the lens section again. The T ALL Y lamp and REC indicator lamp go out and the unit enters the record-standby mode.
E-54 7. SHOOTING OPERA TION 00:00:00:00 20 min FAS –3dB FAW I SD FIL1 B F5 .6 4 8 k 12 .2V ED.FWD 01/02/03 AM 01:23:45 7-2 Searching for Recorded Scenes (Edit Search) MONITOR EDITSEARCH FILTER STATU.
7. SHOOTING OPERA TION E-55 00:00:00:00 20 min STOP 01/02/03 AM 01:23:45 48 k 7-4 Checking Recorded Contents in Record-Standby Mode (Recording Check Function) RET button This function is available only when the GY -DV5000 is in the standby mode. In the record-standby mode, approximately 5 seconds of the last recorded portion can be played back.
7. SHOOTING OPERA TION E-56 7-5 HEADER REC Function Item Description ST ART KEY STOP+VTR: Select this setting to turn ON the HEADER REC function. DISABLE: S el ec t t h is s e tting when the HEADER REC function should not operate.
7. SHOOTING OPERA TION E-57 ■ How to set the HEADER REC menu screen 1. Display the HEADER REC menu screen. Press the ST A TUS button for 1 second or longer to display the T OP MENU screen. Use the SHUTTER dial to select TC/UB/CLOCK menu → HEADER REC menu, and then press the SHUTTER dial.
7. SHOOTING OPERA TION E-58 7-6 Recording the Colour Bars MONITOR EDITSEARCH FILTER STATUS SHUTTER MENU AUTO IRIS BACK L NORMAL SPOT L STRETCH NORMAL COMPRESS FULL AUTO BLACK LOLUX MODE POWER ON OFF VTR OPEN VTR CAM 1 3200K 5600K 5600K 5600K ND / / ND 2 .
8. PLA YBACK MODE E-59 MEMO: ● The GY -DV5000 can play back the following three types of videocassettes: • DV videocassette • MiniDV videocassette • DVCAM videocassette ● T apes recorded in the LP mode cannot be played back. 1. Set the POWER switch to ON.
8. PLA YBACK MODE E-60 ■ Press the FF button in the stop mode to fast forward the tape. Press the REW button in the stop mode to rewind the tape. ■ Press the STOP button to stop fast forwarding or rewinding.
8. PLA YBACK MODE E-61 ––– MENU ––– AUDIO.. LCD/VF.. TC/UB/CLOCK.. OTHERS.. FILE MANAGE.. MENU ALL RESET CANCEL EXIT 8-5 Outputting CH-3, CH-4 Channel Audio The DV format is capable of recording up to 4 channels when the 12-bit, 32 kHz sampling frequency is employed.
9. USING EXTERNAL COMPONENTS E-62 9-1 Connecting a Video Component with DV Connector PHONES DC OUT DC IN DV REAR AUDIO IN TALL Y MONITOR EDITSEARCH FILTER STATUS SHUTTER MENU AUTO IRIS BACK L NORMAL SPOT L STRETCH NORMAL COMPRESS FULL AUTO BLACK LOLUX MODE POWER ON OFF VTR OPEN VTR CAM 1 3200K 5600K 5600K 5600K ND / / ND 2 .
9. USING EXTERNAL COMPONENTS E-63 MONITOR EDITSEARCH FILTER STATUS SHUTTER MENU AUTO IRIS BACK L NORMAL SPOT L STRETCH NORMAL COMPRESS FULL AUTO BLACK LOLUX MODE POWER ON OFF VTR OPEN VTR CAM 1 3200K 5600K 5600K 5600K ND / / ND 2 .
10. TIME CODE OPERA TION E-64 10-1 Displaying T ime Code The GY -DV5000 records EBU-standard time codes and user ’ s bits. In the play mode or the record mode, the reproduced time codes or user ’ s bits are shown on the LCD monitor or in the viewfinder .
10. TIME CODE OPERA TION E-65 ––– MENU ––– CAMERA OPERATION.. CAMERA PROCESS.. AUDIO.. LCD/VF.. TC/UB/CLOCK.. OTHERS.. FILE MANAGE.. MENU ALL RESET CANCEL EXIT ––– TC/UB/CLOCK ––– TC PRESET 00:00:00:00 EXECUTE TC CLEAR CANCEL UB PRESET 00 00 00 00 EXECUTE UB CLEAR CANCEL UB REC ON HEADER REC.
10. TIME CODE OPERA TION E-66 The GY -DV5000 also incorporates a time code reader . Therefore, when the unit enters record mode from record-standby mode, it can read the time code data recorded on the tape and record time codes in continuation of the existing data.
E-67 11. MENU SCREENS 1 1-1 Menu Screen Configuration ––– MENU ––– CAMERA OPERATION.. CAMERA PROCESS.. AUDIO.. LCD/VF.. TC/UB/CLOCK.. OTHERS.
E-68 11. MENU SCREENS 1 1-2 Setting Menu Screens MONITOR EDITSEARCH FILTER STATUS SHUTTER MENU AUTO IRIS BACK L NORMAL SPOT L STRETCH NORMAL COMPRESS FULL AUTO BLACK LOLUX MODE POWER ON OFF VTR OPEN VTR CAM 1 3200K 5600K 5600K 5600K ND / / ND 2 .
E-69 11. MENU SCREENS 1 1-3 FILE MANAGE Menu Screen ––– FILE MANAGE ––– LOAD FILE CAM1 LOAD CANCEL STORE FILE CAM1 STORE CANCEL RESET FILE CAM1 RESET CANCEL PAGE BACK The FILE MANAGE menu screen is used to perform the following tasks. ● Storing menu setting contents in two types of files (CAM1, CAM2).
E-70 11. MENU SCREENS CAMERA OPERA TION CAMERA PROCESS AUDIO LCD/VF TC/UB/ CLOCK OTHERS FILE MANAGE MENU ALL RESET EXIT ––––– ––––– ––––– ––––– ––––– ––––– ––––– CANCEL EXECUTE ––––– Displays a menu screen for setting the operation mode for camera shooting.
E-71 11. MENU SCREENS 1 1-5 CAMERA OPERA TION Menu Screen The CAMERA OPERA TION menu screen is only displayed in the Camera mode. Item Function V ariation Range Initial Setting SHUTTER FAW GAIN L GAIN.
E-72 11. MENU SCREENS MASTER BLACK DET AIL DTL. V/H BALANCE SKIN DTL DETECT SCAN WHITE CLIP KNEE POINT ADV ANCED PROCESS P AGE BACK NORMAL NORMAL NORMAL OFF VIDEO 108% 100% ––––– –––.
E-73 11. MENU SCREENS Item Function V ariation Range Initial Setting CINE MODE COLOR MA TRIX GAMMA FLARE <R> FLARE <B> SKIN COLOR ADJUST P AGE BACK OFF ON OFF STD W ARM EXTRA1 EXTRA2 EXTRA.
E-74 11. MENU SCREENS 1 1-9 AUDIO Menu Screen Item Function V ariation Range Initial Setting TEST TONE AUDIO MODE A.OUT A T SEARCH CH1 FRONT VR WIND CUT AUDIO REF .
E-75 11. MENU SCREENS 1 1-10 LCD/VF Menu Screen The LCD/VF menu screen consists of two screens. (1/2 screen, 2/2 screen) ■ LCD/VF (1/2) Menu Screen Settings can be made on the LCD/VF (1/2) menu screen only in the Camera mode. Item Function V ariation Range Initial Setting ZEBRA F .
E-76 11. MENU SCREENS 1 1-10 LCD/VF Menu Screen (Cont’d) ■ LCD/VF (2/2) Menu Screen T APE REMAIN TC/UB AUDIO LCD COLOR LCD PEAKING P AGE BACK OFF ON OFF ON OFF ON MAX (5) 4 NORMAL – 4 MIN ( – .
E-77 11. MENU SCREENS 1 1-1 1 TC/UB/CLOCK Menu Screen T ime codes and user ’ s bits can be set on this screen. Date and time is set on the screen that can be reached from this screen.
E-78 11. MENU SCREENS The HEADER REC menu screen is used for settings related to the HEADER REC function. ( ☞ page 56) 1 1-12 HEADER REC Menu Screen ST ART KEY TC DA T A TC CLEAR UB DA T A UB CLEAR .
E-79 11. MENU SCREENS 1 1-13 TIME/DA TE Menu Screen Item Function V ariation Range Initial Setting DISPLA Y DISPLA Y MODE DA TE REC DISPLA Y STYLE DA TE STYLE TIME STYLE SEC DISPLA Y CLOCK ADJUST P AG.
E-80 11. MENU SCREENS 1 1-14 OTHERS Menu Screen The OTHERS menu screen consists of two screens (1/2 screen, 2/2 screen) ■ OTHERS (1/2) Menu Screen Item Function V ariation Range Initial Setting OUTPUT CHAR.
E-81 11. MENU SCREENS ■ OTHERS (2/2) Menu Screen ALARM VR LEVEL BA TTERY TYPE FRONT T ALL Y BACK T ALL Y P AGE BACK DRUM HOUR OFF LOW MIDDLE HIGH 12V 13.2V 14.4V BLINK ON OFF BLINK ON ––––– ––––– Selects whether or not alarm sound is emitted and the volume of the alarm sound.
E-82 12. FEA TURES OF THE CAMERA SECTION ––– CAMERA OPERATION ––– SHUTTER STEP FAW A GAIN L 0dB GAIN M 6dB GAIN H 9dB SMOOTH TRANS OFF SPOT L/BACK L MIDDLE ASPECT RATIO 4:3 PAGE BACK LOLUX.
E-83 12. FEA TURES OF THE CAMERA SECTION ADJUSTMENT OF LENS IRIS ZEBRA P A TTERN DISPLA Y DURING MANUAL ADJUSTMENT ZEBRA AUDIO LEVELE CH-1 OFF ON SKIN AREA AUTO WHITE ACCU FOCUS VTR 5 12-2 IRIS (Brigh.
E-84 12. FEA TURES OF THE CAMERA SECTION 12-3 Adjusting the Shutter Speed MONITOR EDITSEARCH FILTER STATUS SHUTTER MENU AUTO IRIS BACK L NORMAL SPOT L STRETCH NORMAL COMPRESS FULL AUTO BLACK LOLUX MODE POWER ON OFF VTR OPEN VTR CAM 1 3200K 5600K 5600K 5600K ND / / ND 2 .
E-85 12. FEA TURES OF THE CAMERA SECTION Video monitor Band 12-4 Shooting the Screen Image on a Computer Monitor CAMERA OPERA TION menu screen MONITOR EDITSEARCH FILTER STATUS SHUTTER MENU AUTO IRIS BACK L NORMAL SPOT L STRETCH NORMAL COMPRESS FULL AUTO BLACK LOLUX MODE POWER ON OFF VTR OPEN VTR CAM 1 3200K 5600K 5600K 5600K ND / / ND 2 .
E-86 12. FEA TURES OF THE CAMERA SECTION This switch allows the gain to be boosted when the illumination of the subject is insufficient. The gain should be switched when the brightness is insufficient due to poor lighting conditions.
E-87 12. FEA TURES OF THE CAMERA SECTION AUTO IRIS BACK L NORMAL SPOT L STRETCH NORMAL COMPRESS FULL AUTO BLACK LOLUX MODE POWER ON OFF VTR VTR CAM AUTO IRIS BACK L NORMAL SPOT L STRETCH NORMAL COMPRE.
E-88 12. FEA TURES OF THE CAMERA SECTION The contour emphasis in the skin colour areas of the video signal can be controlled and made to appear gentle and smooth.
E-89 12. FEA TURES OF THE CAMERA SECTION FAS 6dB FAW I SD B 12 .2V 01/02/03 01:23:45 ZEBRA AUDIO LEVELE CH-1 OFF ON SKIN AREA AUTO WHITE ACCU FOCUS VTR 5 ZEBRA switch “ SD ” display ■ Using the .
E-90 13. OTHERS The GY -DV5000 displays messages on the LCD monitor and in the viewfinder in the case of improper operation, notices on remaining battery power and tape and warnings in the case of abnormalities during VCR operation.
E-91 13. OTHERS ● Warning Indications for VCR Abnormalities Should malfunctions occur during VCR operation, the unit self-diagnoses the cause and shows the diagnose together with an error code on the LCD monitor or in the viewfinder .
E-92 13. OTHERS ■ Viewfinder W arning Lamps REC BATT ALARM 1. 2. Battery lamp REC/ALARM lamp 1. BA TTERY lamp This red lamp lights red under the following circumstances. Lights red : When the battery voltage becomes too low for the camera to operate.
E-93 13. OTHERS Symptoms Remedy Power cannot be switched ON. Recording is not possible. Camera image does not appear on LCD monitor or in viewfinder . Image shown on LCD monitor or in viewfinder is dark or blurred. Playback does not start when the play button is pressed.
E-94 13. OTHERS The GY -DV5000 can display the accumulated running time of the head drum in the HOUR METER item on the OTHERS (2/2) menu screen. Use this as a guide for periodical maintenance. ☞ See page 7. 1. Set the POWER switch to ON. 2. Press the ST A TUS button for 1 second or longer to display the T OP MENU screen.
E-95 13. OTHERS 13-4 Specifications ■ CAMERA SECTION Image pickup devices : 1/2-inch interline CCD × 3 Colour separation optical system : F1.4 3-colour separation prism Number of effective pixels :.
E-96 13. OTHERS * Design and specifications are subject to change without notice. 120.5 363.5 VF ZEBRA AUDIO LEVELE CH-1 OFF ON SKIN AREA AUTO WHITE ACCU FOCUS VTR 5 MONITOR EDITSEARCH FILTER STATUS S.
is a registered trademark owned by VICT OR COMP ANY OF JAP AN, L TD. is a registered trademark in Japan, the U.S.A., the U.K. and many other countries.
Un punto importante, dopo l’acquisto del dispositivo (o anche prima di acquisto) è quello di leggere il manuale. Dobbiamo farlo per diversi motivi semplici:
Se non hai ancora comprato il JVC GY-DV5000 è un buon momento per familiarizzare con i dati di base del prodotto. Prime consultare le pagine iniziali del manuale d’uso, che si trova al di sopra. Dovresti trovare lì i dati tecnici più importanti del JVC GY-DV5000 - in questo modo è possibile verificare se l’apparecchio soddisfa le tue esigenze. Esplorando le pagine segenti del manuali d’uso JVC GY-DV5000 imparerai tutte le caratteristiche del prodotto e le informazioni sul suo funzionamento. Le informazioni sul JVC GY-DV5000 ti aiuteranno sicuramente a prendere una decisione relativa all’acquisto.
In una situazione in cui hai già il JVC GY-DV5000, ma non hai ancora letto il manuale d’uso, dovresti farlo per le ragioni sopra descritte. Saprai quindi se hai correttamente usato le funzioni disponibili, e se hai commesso errori che possono ridurre la durata di vita del JVC GY-DV5000.
Tuttavia, uno dei ruoli più importanti per l’utente svolti dal manuale d’uso è quello di aiutare a risolvere i problemi con il JVC GY-DV5000. Quasi sempre, ci troverai Troubleshooting, cioè i guasti più frequenti e malfunzionamenti del dispositivo JVC GY-DV5000 insieme con le istruzioni su come risolverli. Anche se non si riesci a risolvere il problema, il manuale d’uso ti mostrerà il percorso di ulteriori procedimenti – il contatto con il centro servizio clienti o il servizio più vicino.
