Manuale d’uso / di manutenzione del prodotto 7100e+ del fabbricante Japan Tiger
Vai alla pagina of 160
User Manual 7100e + Fast Ethernet 7100e+.p65 25/08/99, 20:48 PM 1.
Fast Ethernet 7100e + 2 T o start Thank you for purchasing the Fast EtherNet. This manual explains how to set up the Fast EtherNet and connect it to the computer .
User Manual 3 English Copyrights of this manual All the copyrights belong to Oki Data Corporation. Unauthorized duplication, copying, translation or the like are strictly forbidden. Written approval must be obtained from Oki Data Corporation. 1. Unauthorized reproduction of some or all of the contents of this manual is strictly prohibited.
Fast Ethernet 7100e + 4 Explanation of symbols in this manual Notes and restrictions concerning the correct operation of the F ast EtherNet. Make sur e to read them in order to avoid incorrect operation. Useful tips and references for the operation of the F ast EtherNet.
User Manual 5 English and documentation of the customer and cancel the license agreement. If such cancellation took place, the customer will destroy the software and documentation and all copies thereof and will stop using the trademark.
Fast Ethernet 7100e + 6 Contents T o start ........................................................................ 2 FCC ST A TEMENT ...................................................... 2 Copyrights of this manual ..................................
User Manual 7 English Chapter 5 Using with UNIX ...................................................................... 52 Configuring the IP address in the Fast EtherNet ...... 5 3 Configuring the SunOS 4.x.x ................................... 5 6 Configuring the Sun Solaris 2.
Fast Ethernet 7100e + 8 Chapter 8 T roubleshooting ................................................................... 144 Trouble during the self-diagnosis test and while printing the configuration contents ............ 14 5 Trouble while using TCP/IP .
Chapter Fast Ethernet 7100e + Installing the Fast EtherNet Major features of the board 7100e+ ......................... 1 0 Product identification ............................................... 1 0 Part names of the Fast EtherNet ....................
Fast Ethernet 7100e + 10 Installing the Fast EtherNet Major features of the board 7100e+ Compatible with multiple protocols • Compatible with the f our network protocols – EtherT alk, TCP/IP , IPX/SPX and NetBEUI. Dedicated network utility included • The Fast EtherNet can be conf igured from Windo ws98/95, NT4.
User Manual 11 English Part names of the Fast EtherNet ➌ ➌ ➌ ➌ ➌ ST A T LED (orang e lamp) Flashes during data reception. In the case that abnormality of the Fast EtherNet was detected, performs one of the following.
Fast Ethernet 7100e + 12 Mounting on a printer The method of mounting the Fast EtherNet differs from one printer to another . For details refer to your printer’ s User Manual. Connecting to a network Needed for the connection The following products are needed in order to connect the Fast EtherNet to a network.
User Manual 13 English The connection process 1. T urn OFF the printer’ s po wer switch In the case that the network used includes a r outer and a server , start the r outer and the server and only then turn ON the printer’ s power switch.
Fast Ethernet 7100e + 14 V erification of the “print menu” of the printer In order to use the Fast EtherNet, the Fast EtherNet settings must first be v erified. Y ou can verify these settings by using the “print menu” of the printer . The method of menu printing dif fers fr om one printer to another .
User Manual 15 English Functions of the DIP Switches By using the DIP Switches of the Fast EtherNet, initialization of the Fast EtherNet, verification of its settings and the self- diagnosis test can be performed. Initialization of the Fast EtherNet 1.
Fast Ethernet 7100e + 16 V erification of the settings contents 1. T urn the printer’ s power switch OFF . 2. T urn DIP Switch No. 3 ON. 3. T urn the printer’ s power switch ON. The current settings contents are printed. 4. T urn the printer’ s power switch OFF .
User Manual 17 English Self-diagnosis test 1. T urn the printer’ s power switch OFF . 2. T urn DIP Switch No. 4 ON. 3. T urn the printer’ s power switch ON. The results of the self-diagnosis are printed. 4. T urn the printer’ s power switch OFF .
Chapter Fast Ethernet 7100e + Printing from Windows98/95 OKI LPR Utility Operating En vironment ................. 1 9 W ith the NetBUEI protocol ......
User Manual 19 English Printing fr om Windows 95/98 In order to print from Windo ws 95/98 via TCP/IP , it is necessary to set up the Fast EtherNet and W indows 95/98. W indo ws 95/ 98 does not include a LPR printing function, so you must use the OKI LPR utility .
Fast Ethernet 7100e + 20 1. Start the “Network” control panel. 2. Open the “Network configurations” tab and confirm that “TCP/IP à XXX” is displayed. If “TCP/IP à XXX” is not displayed, click on “ Add”. 3. Select “Protocol” and click on “ Add”.
User Manual 21 English 6. Configur e each of the “IP add ress, Subnet Mask, Gateway , DNS Settings”. 7. Restart W indows 98/95. 7100e+.p65 25/08/99, 20:49 PM 21.
Fast Ethernet 7100e + 22 Configuring the IP address for the Fast EtherNet Use the Standard Setup Utility (W indow) a ttached to the Fast EtherNet and configure the IP address of the Fast EtherNet, the subnet mask and the gatew ay . For the details of the Standard Setup Utility , refer to “Chapter 7 Management of the Fast EtherNet”.
User Manual 23 English 6. If you agree to the User License Agr eement, click on “Y es”. Starts the “ AdminMana ger”. 7. Look up the EtherNet address in the list and select the Fast EtherNet to setup. OKIPAGE 8C The EtherNet address (MAC address) appears in the “print menu” of the printer .
Fast Ethernet 7100e + 24 8. Choose the “OKI Device Setup” in the “Setup” menu. ( 2) T ype in the EtherNet addr ess and the “IP addr ess” which configured it, and click on “OK”. <In case that TCP/IP protocol is the only working protocol> (1 ) When the next message is displayed, clic k on “Y es”.
User Manual 25 English 9. Configure the TCP/IP T ab item and make the following “Settings”. ➊ Check the “Use the TCP/IP protocol”. ➋ T ype in the “IP address”.
Fast Ethernet 7100e + 26 In case a small-scale LAN is included, such as a network connecting one printer and one computer , configur e as follows (using “RFC1918”). F or the computer settings please r efer to P age 18 and for the printer settings please r efer to P age 21.
User Manual 27 English Setting up the printer software Next, set up the printer softw are. After adding the printer driv er in Windo ws98/95 as the “Default local printer”, perform the setup. Set up the OKI LPR utility on a hard disc drive with ample free space.
Fast Ethernet 7100e + 28 4. In “Name” type in “D:OKILPRSETUP” (when the CD-R OM drive is D:) and click on “OK”. 6. Select “ Add printer” from the “Remote printer” menu. The setup program starts. Proceed with the setup following the instructions on the screen.
User Manual 29 English · The OKI LPR utility is capable of r e gistering up to 10 printers. · If the OKI LPR utility directory or the spool directory contains any files that have been added after the installation of the utility , you will not be able to delete the dir ectory .
Fast Ethernet 7100e + 30 With the NetBUEI protocol Configuring Windows98/95 In the follo wing e xplana tion, Windo w98 is used as an example. The screen display and part of the contents of the selected branch may dif f er , depending on the OS v e rsion and the system structure.
User Manual 31 English 5. In the case that “NetBEUI à XXX” is not displayed, select “Protocol” and click on “ Add”. 6. Select “Microsoft” and “NetBEUI”, click on “OK”.
Fast Ethernet 7100e + 32 Setting up the printer software Next, set up the printer softw are. After adding the printer driv er in Windo ws98/95 as the “Default local printer”, perform the setup. In the follo wing explanation, setting up OKIP A GE 8c(PS) as the printer in Windo ws98 is used as an example.
User Manual 33 English 5 . Double-click on “Entire Network”, “PrintServer”, “MLxxxxxx”. The “PrintServer” is the “ W orkgr oup Name” displayed in the “print menu” of the printer .· “MLxxxxxx” is the “Computer Name” displayed in the “print menu” of the printer .
Fast Ethernet 7100e + 34 3 · The “Computer name” name and “W orkgr oup” name can be c hanged using a W eb Br owser , , etc. · The Master Br owser function manages the machine information whic h exists within the same W orkgroup, and r eplies to summary requests fr om other W orkgr oups.
Chapter Fast Ethernet 7100e + Printing Fr om Windo wsNT 4.0 W ith the TCP/IP protocol ......................................... 3 6 W ith the NetBEUI pr otocol .
Fast Ethernet 7100e + 36 Printing Fr om WindowsNT 4.0 In order to print from W indo wsNT Ser v er 4.0 or W indowsNT W orkstations 4.0, Windo wsNT 4.0 and the Fast EtherNet ha ve to be set up. The TCP/IP protocol and NetBEUI protocol can be used from W indowsNT 4.
User Manual 37 English 1. Start the “Network” control panel. 2. Open the “Protocol” tab and confirm that “TCP/IP protocol” is displayed. If “TCP/IP protocol” is not displayed, click on “ Add”. 4. Select “TCP/IP protocol” and click on “Properties”.
Fast Ethernet 7100e + 38 6. Open the “Service” tab and confirm that “Microsoft TCP/IP printing” is displayed. 7. Select the “Microsoft TCP/IP printing” and click on “OK”.
User Manual 39 English Configuring the IP address for the Fast EtherNet Use the Standard Setup Utility (W indow) a ttached to the Fast EtherNet and configure the IP address of the Fast EtherNet, the subnet mask and the gatew ay . For the details of the Standard Setup Utility , refer to “Chapter 7 Management of the Fast EtherNet”.
Fast Ethernet 7100e + 40 OKIPAGE 8C 6. If you agree to the User License Agr eement, click on “Y es”. Starts the “ AdminMana ger”. 7. Look up the EtherNet address in the list and select the Fast EtherNet performing to set up. The EtherNet address (MAC address) appears in the “print menu” of the printer .
User Manual 41 English 8. Choose the “OKI Device Setup” in the “Setup” menu. (4 ) After a while, the F ast EtherNet is displayed in the list. Select the F ast EtherNet displayed and c hoose the “OKI Device Setup” in the “Setup” menu. If the Fast EtherNet is not displayed, click on the “OKI Device search” button.
Fast Ethernet 7100e + 42 9. Configure the TCP/IP T ab item and make the following “Settings”. 10. If the settings are all correct, click on “Setup”. The values set are transmitted to the Fast EtherNet after clicking on “Y es”. At this point, however , the F ast EtherNet operates on the pre-transmission values set.
User Manual 43 English Setting up the Printer Driver Set up the Printer Dri ver for W indows NT4.0. The following procedure uses an OKIP AGE 8c(PS) as an example. The IBM PC/A T compatible PC running W indo wsNT Serv er has the CD- R OM as driv e D: T o complete these changes you will also need the “Printer Software CD-R OM”.
Fast Ethernet 7100e + 44 4 Select [LPR Port] and click [New Port]. • Do not select any port other than [LPR P ort]. • [Apple T alk Printing Device] is available only fo r P ostScript. It cannot be used for any other than a P ostScript driver . 6 Press “Cancel” on the printer driver has already been installed.
User Manual 45 English With the NetBEUI protocol Setting the WindowsNT 4.0 Adds the “NetBEUI protocol” to W indo wsNT 4.0. If W indowsNT 4.0 is set, login must be done with the Administrator’ s authorization. In the follo wing explanation, W indowsNT Server 4.
Fast Ethernet 7100e + 46 Setting up the printer driver Next, set up the printer softw are. After adding the printer driv er in Windo wsNT 4.0 as the “Default local printer”, perform the setup. In the follo wing explanation, setting up OKIP A GE 8c(PS) as the printer in W indo wsNT Serv er 4.
User Manual 47 English 5. T ype in “MLxxxxxxPRN1” in the “ T ype in the port name” and click on “OK”. “MLxxxxxx” is the “Computer Name” displayed in the “print menu” of the printer . · The “Computer name” name and “W orkgr oup” name can be chang ed using a W eb Br owser , T elnet, etc.
Chapter Fast Ethernet 7100e + Using with the Macintosh Configuring Macintosh ............................................ 50 Installing the Printer Driver .
User Manual 49 English Printing From Macintosh In order to print from Macintosh via an EtherT alk network, it is necessary to set up the Fast EtherNet and the Macintosh. T o print fr om Macintosh, you need to have a P ostScript printer . If your printer does not include P ostScript, you cannot use it.
Fast Ethernet 7100e + 50 Configuring Macintosh Change the route for Macintosh AppleT alk to Ethernet. The following example uses MacOS8.5. The screen shots and options may vary depending on the OS version and system configuration. 1 Select [AppleT alk] in [Control Panels] in the Apple menu.
User Manual 51 English Installing the Printer Driver Install the printer dri ver onto the Macintosh. See the User’ s Manual of your printer for details. • EtherT alk is divided into sever al zones. If you want to change your printer to another zone, use “Setup Utility (Macintosh)”.
Chapter Fast Ethernet 7100e + Using with UNIX Configuring the IP address in the Fast EtherNet ...... 5 3 Configuring the SunOS 4.x.x ................................... 5 6 Configuring the Sun Solaris 2.x ............................... 5 8 Configuring the HP-UX9.
User Manual 53 English Printing From UNIX In order to print from a UNIX workstation using TCP/IP , the Fast EtherNet and UNIX workstations must be configured. Configuring the IP address in the Fast EtherNet The first step is to configure the Fast EtherNet with an IP address, subnet mask and gateway address.
Fast Ethernet 7100e + 54 1. Log in as root on the workstation. If it is not possible to log in with super-user authorization, leave the configuration to the network manager . 2. Using the APR command, set a temporar y IP address on the Fast EtherNet. Example: In the case that the IP address is “192.
User Manual 55 English 4 Log in the Fast EtherNet using TELNET . Example: Logging in the Fast EtherNet in the case that the IP address is “192.168.20.127” telnet 192.168.20.127 Trying 192.168.20.127 Connected to 192.168.20.127 Escape character is ^].
Fast Ethernet 7100e + 56 Configuring the SunOS 4.x.x Configuring to print from a SunOS 4.x.x BSD system UNIX. If you type in a wr ong IP address, subnet mask or gateway , the netw ork may go down or other sever e damage may occur . Please set the configuration only after consulting your network manager .
User Manual 57 English 4. Register the printer in the /etc/printcap file. Example: In the case that the printer name “OP8c_lp” is registered in the direct output port (lp) ➊ OP8c_lp: ➋ :lp=:rm.
Fast Ethernet 7100e + 58 Configuring the Sun Solaris 2.x Configuring in order to print from Solaris2.x of Sun Microsystems. · Admintool is normally used to re gister r emote printers on Open W indows. However , it cannot be used her e, as the data recipient and queue have the same name.
User Manual 59 English 4. Register the host which was registered in Procedure 2 as the printer serv er . Example: If “OP8c” is registered as the printer server 1. Stop the print scheduler # /usr/sbin/lpshut 2. Re gister the print server # /usr/sbin/lpsystem t bsd OP8c 5.
Fast Ethernet 7100e + 60 Configuring the HP-UX9.x Configuring in order to print from the HP-UX of Hewlett-Packard. If you type in a wr ong IP address, subnet mask or gateway , the netw ork may go down or other sever e damage may occur . Please set the configuration only after consulting your network manager .
User Manual 61 English 4. When no remote spool is set in the HP-UX machine used, set the following configuration. 1. Stop the printer spooler #/usr/lib/lpshut 2. Add the following line to the /etc/inetd/conf file and r egister the r emote spooler Printer str eam tcp nowait r oot /user/lip/rlpdaemon –I 3.
Fast Ethernet 7100e + 62 Configuring the AIX4.1.5 Conf iguring in order to print from the AIX of IBM. If you type in a wr ong IP address, the network may go down or other sever e damage may occur . Please set the configuration only after consulting your network manager .
User Manual 63 English 4. Register the host which was registered in Procedure 2 as the print server . Example: In he case that “OP8c” is registered as the print server 1. Add the print server # ruser a p OP8c 2. Activate the remote perinter daemon # startsrc s lpd # mkitab lpd:2:once:startsrc s lpd 5.
Fast Ethernet 7100e + 64 Printing via LPD The follo wing describes ho w to print using TCP/IP’ s LPD protocol (lpr , lp commands). Please refer to your workstation’ s manual for the details of the lpr and lp commands. In the following explanation, printing of a print file “test.
User Manual 65 English BSD-based UNIX Printing Print using the “lpr” command. # lpr POP8c_lp test.prn Canceling the printing requirement If the “lprm” command is used, the print job is cancelled. Example: In the case of a print job to “OP8c_lp”, deletion of 123.
Fast Ethernet 7100e + 66 SystemV -based UNIX Printing Print using the “lp” command. # lp d POP8c_lp test.prn Canceling the print request If the “cancel” command is used, the printing job is cancelled. Example: In the case of a print job to “OP8c_lp”, deletion of 456.
User Manual 67 English Printing via FTP Printing with the TCP/IP FTP protocol (ftp command) will now be explained. Please refer to your w orkstation’ s man ual f or the details of the ftp command. In the following explanation, printing of a print file “test.
Fast Ethernet 7100e + 68 Printing 1. Log into the Fast EtherNet. When printing with ftp, you can use any values for “Name” and “P ass-w ord”. Howev er , if the user name is “r oot”, the “P asswor d” set under TELNET or the utility (see “Using telnet” in Chapter 7) will be required.
User Manual 69 English 3. Configure the transfer mode. There are two types of transfer mode, the “BINARY mode” in which the file contents is output as it is and the “ASCII mode” which con verts the LF code to the CR+LF code.
Fast Ethernet 7100e + 70 V erification of the printer status Three states, i.e., the IP address, login user name and transfer mode, can be verified using the quote command “stat”. In addition, by specifying the directory after the stat (lp, sjis, euc), the printer status can be verified.
Chapter Fast Ethernet 7100e + Using with NetW are About NetW are .......................................................... 7 2 NetW are 4.1 Print Ser ver Mode (NDS) ...................... 7 4 NetW are 4.1 Print Server Mode (Bindery) ................ 8 0 NetW are 4.
Fast Ethernet 7100e + 72 Printing fr om NetW are In order to print using a Novell Netware4.1 or NetW are3.1network en vironment, it is necessary to set up the NetW are server and the Fast EtherNet. T o make the configuration changes it is necessary to have f ile server administrator and supervisor authorization.
User Manual 73 English Remote Printer Mode In remote printer mode: [1] a job is stored in a print queue on the f ile serv er , [2] the print server (either on the f ile server or a dedicated workstation) takes the job, and [3] transfers it to the printer allocated to the print queue.
Fast Ethernet 7100e + 74 NetW are 4.1 Print Server Mode (NDS) NetW are4.1 has an NDS network and a bindery network. NDS Network In order to use Netware4.1 print server mode via the NDS network, it is necessary to set up the file server and Fast EtherNet.
User Manual 75 English 4 Activate PCONSOLE. F:>pconsole [A vailable Options] is displayed. Available Options Print Queues Printers Print Servers Quick Setup Change context Generating Print Server , Printer and Print Queue 1 Select [Quick Setup] and then press the Enter key .
Fast Ethernet 7100e + 76 Configuring the Fast EtherNet This section explains how to use the Standard Setup Utility for W indows. Y ou can also make these changes using the Setup Utility on a Macintosh or via TELNET . Read the following description and choose the appropriate utility for your network en vironment.
User Manual 77 English 2 Select [OKI Device Setup] in the [Setup] menu. 3 Click [NetW are] tab . 4 Enter the following items on the NetW are setup screen. Input the print server name. This must match the “Print server name” you created earlier ( 8C-PSERVER in this example).
Fast Ethernet 7100e + 78 5 Click [Print Server Details…] on the NetW are setup screen, enter the following items, and click [OK]. Input the “File Server Name” controlling the printer ( SOFT22- NW4 in this example). This must match “File Server” you logged in on earlier .
User Manual 79 English 7 After all the settings are completed, click [Setup] on the NetW are Setup screen. 8 If the settings are correct, click [Y es]. The settings will be transmitted to the Fast EtherNet. At this point, ho wever , the Fast EtherNet is still operated using the previous settings.
Fast Ethernet 7100e + 80 NetW are 4.1 Print Ser ver Mode (Bindery) NetW are 4.1 has a NDS network and a bindery network. Bindery Network In order to use NetW are 4.1 print server mode with bindery , it is necessary to set up the file server and Fast EtherNet.
User Manual 81 English Creating a Print Queue 1 Select [Print Queues] and press the Enter key . Available Options Print Queues Print Servers Quick Setup Change NetWare Server 2 Press the Ins key to input a print queue name to be newly created (“Q-8C” in this example), then press Enter .
Fast Ethernet 7100e + 82 Creating a printer controlled by the Printer Server 1 Select the print server you generated (“8C-PSER VER”) and press the Enter key .
User Manual 83 English Restarting PCONSOLE on NDS Mode The following configuration is required in order to make the queue generated in bindery mode available to other context users in NDS mode. If other NDS context users do not need to use the device then the following configuration is not required.
Fast Ethernet 7100e + 84 Specifying Directory Users or Groups that can use the Print Queue 1 Select [Print Queues] from [A v ailable Options] and press the Enter key .
User Manual 85 English Configuring the Fast EtherNet This section explains how to use the Standard Setup Utility for W indo ws. Y ou can also make these changes using the Setup Utility on a Macintosh or via TELNET . Read the following description and choose the appropriate utility for your network en vironment.
Fast Ethernet 7100e + 86 2 Select [OKI Device Settings] in the [Setup] menu. 3 Click [NetW are] tab . 4 Enter the follo wing items on the NetW are setup screen. 5 Clic k [Print Server Details…] on the NetW are setup screen, enter the following items, and click [OK].
User Manual 87 English Determine whether or not to enable the bindery mode. When you print only with NetW ar e 4.1 NDS, uncheck this. Unchecking this means the de vice cannot be used from NetW are 4.1 binder y or NetW ar e 3.1. Enter the tree name in which the file server exists ( ODCSOFT in this example).
Fast Ethernet 7100e + 88 1 0 If the print server name you set is display ed on the [NetW are 4.1 console monitor] of the f ile server , connection to the f ile server is completed. If it does not appear , try again to set the f ile server and Fast EtherNet from the beginning.
User Manual 89 English NetW are 4.1 Remote Printer Mode In order to use the NetW are 4.1 remote printer mode, it is necessary to set up the file server and the Fast EtherNet. See other relevant topics in this chapter for: • printing on the NetW ar e 4.
Fast Ethernet 7100e + 90 Generating Print Server , Printer and Print Queue 1 Select [Quick Setup] and pr ess the Enter key . 2 The print server name, printer name and print queue name are generated automatically .
User Manual 91 English 3 The print server is started. Select [Printer Status] in [A vailable Options] and pr ess the Enter key . Available Options Printer Status Print Server Information 4 Choose the printer name you generated earlier (“P1.SOFT22.ENG7” in this example) is chosen from [Printer List].
Fast Ethernet 7100e + 92 Configuring the Fast EtherNet This section explains how to use the Standard Setup Utility for W indows. Y ou can also make these changes using the Setup Utility on a Macintosh or via TELNET . Read the following description and choose the appropriate utility f or your network en vironment.
User Manual 93 English 2 Select [OKI Device Settings] in the [Setup] menu. 3 Click [NetW are] tab . 4 Enter the follo wing items on the NetW are setup screen. 5 Click [Remote Printer Details] on NetW are setting screen, enter the following items, then click [OK].
Fast Ethernet 7100e + 94 7 If the settings are correct, click [Y es]. The settings are transmitted to Fast EtherNet. At this point, howe ver , F ast EtherNet is still operating according to the previous settings. 8 Click [Y es] to reset the Fast EtherNet.
User Manual 95 English NetW are 3.1 Envir onment Under NetW are 3.1, both print ser ver mode and remote printer mode are supported. Although the procedures for setting the file servers are the same, there is a difference in the configuration of the Fast EtherNet.
Fast Ethernet 7100e + 96 Generating Print Queue 1 From the [A vailable Options], select [Print Queue Information] and press the Enter key . 2 P ress the Ins k ey . Enter the ne w print queue name to be generated (“Q8C” in this e xample), then press the Enter key .
User Manual 97 English 6 Enter the remote printer name (“OP8C”) in the [Name] column. Environment Settings for Printer 0 Name: OP8C Type: Pre-defined Identifier by Company: IRQ: Buffer Size (K byt.
Fast Ethernet 7100e + 98 Allocating Print Queue to Printer 1 Select “Queues Serviced by Printer” and press the Enter ke y . Print Server Configuration Menu File Server Assigned Printer Notificatio.
Chapter Fast Ethernet 7100e + Management of the Fast EtherNet Using a W eb Browser ............................................. 1 0 0 Using TELNET ...................................................... 10 9 Using standard setup utility (W indows) ...
Fast Ethernet 7100e + 100 Management of the Fast EtherNet The Fast EtherNet can be configured from a computer on the network. This procedure will now be explained.
User Manual 101 English 3. Click on the items you want to change in the left frame. The details screen of each item is displayed. For the details, see “Configuration Items” (Page 97).
Fast Ethernet 7100e + 102 4. After making the necessary changes, click on “Submit”. The EtherNet address (MAC address) will be displayed in the print menu of the printer . Once the new values set are transmitted to the Fast EtherNet, the following screen is displayed.
User Manual 103 English Configuration items For the details of each item, refer to “Contents of the Fast EtherNet settings” (Page 131). The conf igurable items may vary fr om one printer to another . Network Connection Configuration of the Network Basics Protocol Option Set “Enable” or “Disable” for each protocol.
Fast Ethernet 7100e + 104 NetW are Settings Configuration of the NetW are pr otocol NetW ar e Print Server Name (Machine name) NetW are Mode Determine if the operation mode of the Fast EtherNet is a print server mode (PSER VER) or a remote printer mode (RPRINTER).
User Manual 105 English Remote Printer Mode Configuring for the remote printer mode Printer Name for R-Printer Mode In the remote printer mode, type in the “Printer name” recorded in print server . Make sure that it is consistent with the printer name recorded in the print server .
Fast Ethernet 7100e + 106 EtherT alk Settings Configuring the EtherT alk protocol EtherT alk Zone Name In order to change the zone in which the printer resides, type in the new zone name.
User Manual 107 English SNMP Settings Configuring the SNMP Trap community T ype in the trap community name. The trap community name can be up to 15 alphanumeric characters long. Trap IP Address T ype in the trap IP address. If the IP address is 0.0.0.
Fast Ethernet 7100e + 108 Change the configuration of the printer menu. The conf igurable items may vary fr om one printer to another . Paper and T rays Paper feed and paper size Set the paper size, the paper thickness, etc., of each tray . T imers and Alarms Timer s and Alarms Set the Auto Page Eject Time, Power Save Time, etc.
User Manual 109 English Using TELNET The Fast EtherNet can be configured using the TELNET related to the workstation. · In or der to change the F ast EtherNet configur ation, the user must login as “r oot”. · The factory setting of the passwor d of the “r oot” user is “None”.
Fast Ethernet 7100e + 110 4 Log into the Fast EtherNet using TELNET . Example: Logging in the Fast EtherNet when the IP address is “192.168.20.127” telnet 192.168.20.127 Trying 192.168.20.127 Connected to 192.168.20.127 Escape character is ^].
User Manual 111 English Configuration items See “Contents of the Fast EtherNet settings” (Page 131) for the details of each item. Main screen No. Message Value (level .
Fast Ethernet 7100e + 112 TCP/IP configuration screen NetWare configuration screen Displayed if [1] is selected in the main screen. Configure if TCP/IP is used. SNMP configuration screen Displayed if [2] is selected in the main screen. Configure if SNMP is used.
User Manual 113 English NetWare print server mode configuration screen Displayed if [4] is selected in the NetW are configuration screen. Conf igure if the NetW are print server mode is used. NetWare remote printer mode configuration screen Displayed if [5] is selected in the NetW are configuration scr een.
Fast Ethernet 7100e + 114 EtherT alk configuration screen Displayed if [4] is selected in the main screen. Configure if EtherT alk is used . NetBEUI configuration screen Displayed if [5] is selected in the main screen. Configure if NetBEUI is used. 7100e+.
User Manual 115 English Printer port configuration screen Displayed if [6] is selected in the main screen. Configure the printer port. Numbers 5 thr ough 11 function only if a postscript printer is used. Do not use them for other printers. Printer trap configuration screen Displayed if [8] is selected in the main screen.
Fast Ethernet 7100e + 116 TCP T rap configuration screen Displayed if [2] to [6] are selected in the printer trap configuration screen. Configure the printer trap when using TCP/ IP . IPX T rap configuration screen Displayed if [7] is selected in the printer trap configuration screen.
User Manual 117 English Using standard setup utility (Windows) It is possible to set up the Fast EtherNet from a PC running TCP/ IP or IPX/ SPX using the Standard Setup Utility for Windo ws supplied with the Fast EtherNet. Operating environment A PC with Windo ws 98/95 or W indows NT Serv er4.
Fast Ethernet 7100e + 118 2 Click [UK English]. The [Setup Utility] screen will be displayed. 5 [AdminManager] will start up. Selecting any language other than [UK English] may affect the system. 3 Click [OKI Device Standard Setup]. 4 Select [Ex ecute from CD-R OM] or [Start after Installing].
User Manual 119 English 6 Select the Fast EtherNet to set up from the Ethernet address list. Then select [OKI Device Setup] from the [Setup] menu. • If you are using IPX/SPX pr otocol, the F ast EtherNet may not be listed if ther e are many NetW are f ile ser vers.
Fast Ethernet 7100e + 120 8 If the settings are correct, click [Y es]. The ne w settings will be transmitted to the Fast EtherNet. 9 Click [Y es] to make the new settings tak e ef fect. For details of each item, see “Fast EtherNet Settings” at the end of this chapter .
User Manual 121 English 1 Set whether TCP/IP is used. 2 Enter the IP Address in the format: “###.###.###.###”. 3 Check the boxes if the address is to be acquired from RARP or DHCP/ BOO TP . 4 Enter the subnet mask in the format: “###.###.###.###”.
Fast Ethernet 7100e + 122 1 Set whether EtherT alk is used. 2 Enter the new printer name if you change the printer name used by Chooser . 3 Enter the new zone name if you want to move your printer to a different zone. 1 Enter the authentic community name and trap community name.
User Manual 123 English Printer port setup screen 1 The character string transmitted to the printer before and after sending print data to the direct output port (lp). 2 The character string transmitted to the printer before and after sending print data to the output port via a Kanji filter (sjis or euc).
Fast Ethernet 7100e + 124 Printer status System status Select [Printer Status] from the [Status] menu. The current printer status will be displayed. Select [System Status] from the [Status] menu. The current Fast EtherNet settings will be displayed. This information can also be stored as a log file.
User Manual 125 English NetMeter Creating NetWare queues NetW are pr int queues can be created on a NetW ar e Server . • NetW ar e Client32 or IntranetW ar e Client should be on the same PC as the Standard Setup Utility is used. Once installed you will be able to log in to the NetW ar e NDS network and bindery network.
Fast Ethernet 7100e + 126 2 Click [Next]. 6 Click [Finish]. 7 Select [OKI Device Settings] to continue the Fast EtherNet setup. 3 Select [NDS Mode] or [Bindery Mode] depending on the network en vironment. 4 Follo w the screen instructions to create a NetW are queue .
User Manual 127 English Deleting NetWare objects Print serv ers, print queues and printers created on the NetW are server can be deleted. • NetW are Client32 or Intr anet W ar e Client should be added to a PC where the Standard Setup Utility is used, which allows you to lo g in to the NetW ar e NDS network and bindery network.
Fast Ethernet 7100e + 128 Configuring IP addresses If a PC running the Standard Setup Utility uses only TCP/IP protocol, the Fast EtherNet may not be listed on the main screen if its IP address has never been configured. Use the following procedure to set the IP address.
User Manual 129 English En vironment setup Select [En vironment Setup] from the [Options] menu. TCP/IP Set the broadcast address for searching the Fast EtherNet with TCP/IP . NetWare Set the NetW are netw o rk number for searching the F ast EtherNet with NetW ar e .
Fast Ethernet 7100e + 130 Timeout Polling Time - Set the time for polling the response from the Fast EtherNet (in seconds). Using quick setup utility (Windows) It is possible to set up the Fast EtherNet from a PC running TCP/ IP or IPX/ SPX using the Quick Setup Utility for W indow s supplied with the Fast EtherNet.
User Manual 131 English Setting up and using the utility The follo wing procedure uses W indows 98 as an e xample. Please hav e the “Fast EtherNet CD-R OM” ready . 1 Insert the “Fast EtherNet CDR OM” into the PC’ s CD-R OM dri ve. The Setup Utility starts automatically .
Fast Ethernet 7100e + 132 5 Follow the instructions on the screen to configure the Fast EtherNet. 6 Check the setting details. If the settings are correct, click [Run]. The new settings will be transmitted to the Fast EtherNet. F or creating NetW are queues and so on, it is necessary to add NetW are Client32 or Intr anetW are Client to the PC.
User Manual 133 English Using setup utility (Macintosh) It is possible to set up the Fast EtherNet from a Macintosh running TCP/IP , using the Setup Utility for Macintosh that comes with the Fast EtherNet. Operating environment A Macintosh using System 7.
Fast Ethernet 7100e + 134 3 Select the Fast EtherNet you wish to set up from the address list. The Ethernet addr ess is display ed in the F ast EtherNet self-diagnostics test print. 4 Select [Printer Server Setup] from the [Setup] menu. If you have never conf igure the IP addr ess on the F ast EtherNet, the screen below will be displayed.
User Manual 135 English 6 Enter the required items, and click [End Setup]. 8 T o enable the new settings, click [OK] and po wer cycle the printer . For details of each setting, see “Fast EtherNet Settings”. 7 If the settings are correct, click [OK].
Fast Ethernet 7100e + 136 1 Set whether TCP/IP is used. 2 Enter the IP address in the format: “###.###.###.###”. 3 Check here if IP address is to be acquired from RARP or DHCP/ BOO TP . 4 Enter the subnet mask in the format: “###.###.###.###”.
User Manual 137 English NetWare setup screen Enter the printer name, packet type, operating mode, NetW are port name and so on. 7100e+.p65 25/08/99, 20:55 PM 137.
Fast Ethernet 7100e + 138 EtherT alk setup screen Printer port setup screen 1 Set whether EtherT alk is used. 2 If you want to move your printer to a different zone, enter the new zone name. 3 Enter a new printer name to change the printer name used by Chooser .
User Manual 139 English Using JetAdmin Some JetAdmin functions are supported. • Under [Operating Mode], either [Queue Server Mode] or [Remote Printer Mode] can be selected. • In [Remote Pr inter Mode] the Print Serv e r , (Only if its name has 30 characters or less) and Printer number details have to be added.
Fast Ethernet 7100e + 140 Using SNMP The Fast EtherNet is equipped with an SNMP agent which runs on UDP . T he printer can be controlled using an SNMP Manager . The Fast EtherNet supports SNMPv1, MIB-II and OKI Data Private MIB. For OKI Data Private MIB, please use the file appropriate to your printer , referring to “readme.
User Manual 141 English Setup V alue Default v alue None Default v alue 255 sec. 1 : Permitted 2 : Not per mitted ENABLE : T o use the function DISABLE: Not to use the function ETHER-II: ETHERNET -II 802.2 : IEEE802.2 802.3 : IEEE802.3 SNAP : SNAP PRINTER : Remote Printer Mode PSER VER : Print Ser ver Mode Function Set MIB-II SysLocation.
Fast Ethernet 7100e + 142 Setup V alue ENABLE : T o use the function DISABLE: Not to use the function Default v alue None Default v alue None Default v alue All None Default v alue 10 sec.
User Manual 143 English Items Printer type TAB size Page width (letters in a line) Page length (lines in a page) Banner output Printer Trap Trap enable Trap type Trap address(UDP) Trap address(IPX) Status Ready Offline Printer Error Function Set Printer type for KANJI filter.
Chapter Fast Ethernet 7100e + T r oubleshooting Trouble during the self-diagnosis test and while printing the configuration contents ............ 1 4 5 Trouble while using TCP/IP .................................. 1 4 6 T rouble while using NetW are .
User Manual 145 English T r oubleshooting This chapter describes typical problems when using the Fast EtherNet and tips for solving them. Problems during the self-diagnosis test and while printing the.
Fast Ethernet 7100e + 146 Pr oblems printing via TCP/IP Printer cannot find the Fast EtherNet · If the printer is on, turn the printer off and then on again. · Check if there is a response to ping. · Check if the network cable is correctly connected.
User Manual 147 English Pr oblems printing via NetWare Printer cannot find the Fast EtherNet · If the printer is on, turn the printer off and then on again. · Check if the network cable is correctly connected. If needed, change the cable and try again.
Fast Ethernet 7100e + 148 Printer does not print · Check if the network cable is correctly connected. If needed, change the cable and try again. · If the printer is on, turn the printer off and then on again. · Check that Fast EtherNet has connected to the file server .
User Manual 149 English T rouble while using NetBEUI The Fast EtherNet is not identified · If the printer is on, turn the printer off and then on again.
Appendices Fast EtherNet 7100e + Appendices Main Specifications ............................................... 15 1 IP Address Conf iguration Using DHCP , BO O TP , RA RP ....................................................... 1 5 1 Configuration from TELNET .
User Manual 151 English Main Specifications Item Content C P U Falcon 33MHz Network Interface 100BASE-TX 10BASE-T Network protocols IPX/SPX (NetW are) Remote printer mode Print server mode Frame types: IEEE802.
Fast Ethernet 7100e + 152 Printer preparation In order to use DHCP , BOO TP or RARP , you need to set DHCP/ BOO TP or RARP to EN ABLE on the Fast EtherNet. Use one of the following procedures to set up the Fast EtherNet. Setting from utility This section describes how to set up with the Standard Setup Utility for W indows.
User Manual 153 English 3 Check [Use DHCP/BOO TP] or [Use RARP] in the TCP/IP setting window and click [Setup]. 5 T o make the ne w settings take effect, click [Y es]. 4 If the settings are correct, clic k [Y es]. The settings are transmitted to the Fast EtherNet.
Fast Ethernet 7100e + 154 Configuration from TELNET The Fast EtherNet can be configured using the TELNET related to the workstation. In the following explanation, SunSolaris 2.4 is used as an example. The method of configuring each command may differ from one workstation to another .
User Manual 155 English Setting through DHCP DHCP is a protocol for dynamically assigning IP addresses to each host on a TCP/IP network. It can set subnet masks as well as IP addresses. • This function is not available unless there is a DHCP server on the network.
Fast Ethernet 7100e + 156 4 From the list of DHCP servers, click on a server for which you want to create a scope. 6 Select [Add Preselection] form the [Scope] menu, input the [IP address], [Unique ID] and [Client name] for the printer and click [Add].
User Manual 157 English 7 Select [Activate] in the [Scope] menu to make the created scope active. If you select [Active Resource] in the [Scope] menu, you can check the state of your printer .
Fast Ethernet 7100e + 158 Setting from BOO TP BOO TP is a protocol for assigning IP addresses which hav e been registered on a BOO TP server to each host on the TCP/IP network. The printer will acquire an IP adddress when it is turned on. • This function is not available unless ther e is a BOO TP server on the network.
User Manual 159 English Setting through RARP RARP is a protocol for assigning IP addresses, which have been registered on a RARP server to each host on the TCP/IP network. The printer will acquire an IP address when it is turned on. • This function is not available unless there is a RARP server on the network.
Fast Ethernet 7100e + 160 7100e+ Fast EtherNet User Manual Publication: A pril 1999, First Edition Publisher: Oki Data Incorporated 40929501EE 7100e+.p65 25/08/99, 20:56 PM 160.
Un punto importante, dopo l’acquisto del dispositivo (o anche prima di acquisto) è quello di leggere il manuale. Dobbiamo farlo per diversi motivi semplici:
Se non hai ancora comprato il Japan Tiger 7100e+ è un buon momento per familiarizzare con i dati di base del prodotto. Prime consultare le pagine iniziali del manuale d’uso, che si trova al di sopra. Dovresti trovare lì i dati tecnici più importanti del Japan Tiger 7100e+ - in questo modo è possibile verificare se l’apparecchio soddisfa le tue esigenze. Esplorando le pagine segenti del manuali d’uso Japan Tiger 7100e+ imparerai tutte le caratteristiche del prodotto e le informazioni sul suo funzionamento. Le informazioni sul Japan Tiger 7100e+ ti aiuteranno sicuramente a prendere una decisione relativa all’acquisto.
In una situazione in cui hai già il Japan Tiger 7100e+, ma non hai ancora letto il manuale d’uso, dovresti farlo per le ragioni sopra descritte. Saprai quindi se hai correttamente usato le funzioni disponibili, e se hai commesso errori che possono ridurre la durata di vita del Japan Tiger 7100e+.
Tuttavia, uno dei ruoli più importanti per l’utente svolti dal manuale d’uso è quello di aiutare a risolvere i problemi con il Japan Tiger 7100e+. Quasi sempre, ci troverai Troubleshooting, cioè i guasti più frequenti e malfunzionamenti del dispositivo Japan Tiger 7100e+ insieme con le istruzioni su come risolverli. Anche se non si riesci a risolvere il problema, il manuale d’uso ti mostrerà il percorso di ulteriori procedimenti – il contatto con il centro servizio clienti o il servizio più vicino.
