Manuale d’uso / di manutenzione del prodotto Wheelchair Pronto M91 Base del fabbricante Invacare
Vai alla pagina of 76
Owner’s Operator and Maintenance Manual DEALER: This manual MUST be given to the user of the wheelchair. USER: BEFORE using this wheelchair, read this manual and save for future reference. For more information regarding Invacare products, parts, and services, please visit www.
REFERENCE DOCUMENTS Pronto® M91™Base with SureStep® 2 Part No 1143153 WARNING A qualified technician MUST pe rform the initial se t up of this wheelchair.
TABLE OF CONTENTS Part No 1143153 3 Pronto® M91™Base with SureStep® TABLE OF CONTENTS REFERENCE DOCUMENTS ................................................................. 2 REGISTER YOUR PR ODUCT ..................................................
TABLE OF CONTENTS Pronto® M91™Base with SureStep® 4 Part No 1143153 TABLE OF CONTENTS Safety Inspection Checklis ts ................... ............................................. .................. .................................26 Inspect/Adjust Initially .
TABLE OF CONTENTS Part No 1143153 5 Pronto® M91™Base with SureStep® TABLE OF CONTENTS Disconnecting/Connecting the Joysticks .. ................................................................... .................... ....44 SPJ+ Joysticks ........
TABLE OF CONTENTS Pronto® M91™Base with SureStep® 6 Part No 1143153 TABLE OF CONTENTS When to Charge Batteries .......................... ............................................. .................. .............. ..............62 SPJ+ Joysticks .
SPECIAL NOTES Part No 1143153 7 Pronto® M91™Base with SureStep® SPECIAL NOTES Signal words are use d in this manual and apply to hazards or unsafe practices which could result in personal injury or property damage.
SPECIAL NOTES Pronto® M91™Base with SureStep® 8 Part No 1143153 WARNINGS The seat positioning strap is a positioning be lt only. It is not d esigned for use as a safety device withstanding hi gh stress loads such as auto or aircraft safety belts.
LABEL LOCATIONS Part No 1143153 9 Pronto® M91™Base with SureStep® LABEL LOCATIONS M91 Standard NOTE: The serial numbe r label is located on the inside of the right rear frame.
LABEL LOCATIONS Pronto® M91™Base with SureStep® 10 Part No 1143153 M91 Heavy Duty NOTE: The serial number label is located on the inside of the right rea r frame.
LABEL LOCATIONS Part No 1143153 11 Pronto® M91™Base with SureStep® Wheelchairs With TRRO Wheelchairs Without TRRO NOTE: Also on opposite side. NOTE: Also on opposite side. NOTE: Also on opposite side.
TYPICAL PRODUCT PARAMETERS Pronto® M91™Base with SureStep® 12 Part No 1143153 TYPICAL PRODUCT PARAMETERS Pronto M91 NOTE: Based on 18 ‐ inch deep Va n seat.
SECTION 1—GENERAL GUIDELINES Part No 1143153 13 Pronto® M91™Base with SureStep® SECTION 1—GENERAL GUIDELINES WARNING SECTION 1 - GENERAL GUIDELIN ES contai ns important inform ation for the safe operation and use of this product.
SECTION 1—GENERAL GUIDELINES Pronto® M91™Base with SureStep® 14 Part No 1143153 DO NOT make sharp turns in the forw ard or reverse direction at excessiv e speed.
SECTION 1—GENERAL GUIDELINES Part No 1143153 15 Pronto® M91™Base with SureStep® Make sure detent balls of the quick ‐ release pin are fully released before operating the wheelchair . Keep detent balls clean.
SECTION 1—GENERAL GUIDELINES Pronto® M91™Base with SureStep® 16 Part No 1143153 Charging Batteries DANGER When using an extension cord , use only a three wire extension cord having at least 16 AWG (American Wire Gauge) wire and the same or high er electrical rating as the devise being c onnected.
SECTION 1—GENERAL GUIDELINES Part No 1143153 17 Pronto® M91™Base with SureStep® Rain Test Inv acare has tested its pow er wheelchairs in accordance with ISO 7176 “Rain Te s t .
SECTION 2—EMI INFORMATION Pronto® M91™Base with SureStep® 18 Part No 1143153 SECTION 2—EMI INFORMATION WARNING CAUTION: IT IS VERY IMPORTANT THAT YOU READ THIS INF ORMATION REGARDING THE POSSIBLE E FFECTS OF ELECTROMAGNETIC INTERFERENCE ON YOUR POWERED WHEELCHAIR.
SECTION 2—EMI INFORMATION Part No 1143153 19 Pronto® M91™Base with SureStep® WARNING Powered Wheelchair Electrom agnetic Interference (EMI) Because EM energy rapidly becomes more intense as one moves closer to the transmitting antenna (source), the EM fi elds from hand-hel d radio wave sources (transceivers) are of special concern.
SECTION 3—SAFETY/HANDLING OF WHEELCHAIRS Pronto® M91™Base with SureStep® 20 Part No 1143153 SECTION 3—SAFETY/HANDLING OF WHEELCHAIRS “Safety and Handling” of the wheelchair requires the close atte ntion of the wheelchair user as wel l as the assistant.
SECTION 3—SAFETY/HANDLING OF WHEELCHAIRS Part No 1143153 21 Pronto® M91™Base with SureStep® WARNING Many activities requir e the wheelchair user to re ach, bend and tr ansfer in and out of the wheelchair. These moveme nts will cause a change to the normal balance, center of gravity, and weight distribu tion of the wheelcha ir.
SECTION 3—SAFETY/HANDLING OF WHEELCHAIRS Pronto® M91™Base with SureStep® 22 Part No 1143153 Pinch Points WARNING Pinch point may occur when returning the tilted seat to the full upright position. Make sure the hands and body of the occupant, attendants and bystanders are clear of all pinch points before lowering seat (FIGURE 3.
SECTION 3—SAFETY/HANDLING OF WHEELCHAIRS Part No 1143153 23 Pronto® M91™Base with SureStep® Lifting/Stairways WARNING DO NOT attempt to move an occupied power wheelcha ir between floors using a stairway. Use an elevator to move an occupied power wh eelchair between floors.
SECTION 3—SAFETY/HANDLING OF WHEELCHAIRS Pronto® M91™Base with SureStep® 24 Part No 1143153 Transferring To and From Other Seats WARNING ALWAYS turn the wheelchair power Off and engage the motor release levers to prevent the wheels from moving before attempting to tr ansfer in or out of the wheelchair.
SECTION 3—SAFETY/HANDLING OF WHEELCHAIRS Part No 1143153 25 Pronto® M91™Base with SureStep® Reaching, Leanin g and Bending - Forward WARNING DO NOT attempt to reach object s if you have to move fo rward in the seat or pick them up from the floor by reac hing down between your knees.
SECTION 4—SAFETY INSPECTION/TROUBLESHOOTING Pronto® M91™Base with SureStep® 26 Part No 1143153 SECTION 4—SAFETY INSPECTION/ TROUBLESHOOTING NOTE: Every six months or as necessary take your wheelchair to a qualifie d dealer for a thor ough inspection and servicing.
SECTION 4—SAFETY INSPECTION/TROUBLESHOOTING Part No 1143153 27 Pronto® M91™Base with SureStep® Inspect/Adjust Weekly ❑ Ensure seat is secured to wheelchair frame. ❑ Ensure seat and/or back upholstery hav e no rips and do not sag.
SECTION 4—SAFETY INSPECTION/TROUBLESHOOTING Pronto® M91™Base with SureStep® 28 Part No 1143153 ❑ Inspect and clean the stability lock gears. Replace if w orn. ❑ Clean upholstery and armrests. ❑ Inspect charger AC power cord for damage.
SECTION 4—SAFETY INSPECTION/TROUBLESHOOTING Part No 1143153 29 Pronto® M91™Base with SureStep® Information Gauge Display Diagnostics Service Indicator Light Diagnostics DISPLAY DESCRIPTION DEFINITION COMMENTS All LEDs are off. Power is off. All LEDs are on.
SECTION 4—SAFETY INSPECTION/TROUBLESHOOTING Pronto® M91™Base with SureStep® 30 Part No 1143153 MPJ+, PSR+, PSF+ Joysticks or Displays SYMPTOM PROBABLE CAUSE SOLUTIONS SPM L Park Brake Fault or SPM R Park Brake Fault displays and wheelchair does not drive.
SECTION 4—SAFETY INSPECTION/TROUBLESHOOTING Part No 1143153 31 Pronto® M91™Base with SureStep® Checking Battery Charge Level The following “Do’ s” and “Don’ts” are provided for your convenience an d safety .
SECTION 5—WHEELCHAIR OPERATION Pronto® M91™Base with SureStep® 32 Part No 1143153 SECTION 5—WHEELCHAIR OPERATION WARNING After ANY adjustments, repa ir or service and before use, make sure that all attaching hardware is tightene d securely - otherwise inju ry or damage may result.
SECTION 5—WHEELCHAIR OPERATION Part No 1143153 33 Pronto® M91™Base with SureStep® Using the Joystick to Drive the Wheelchair NOTE: For this proced ure, refe r to FIGURE 5.
SECTION 5—WHEELCHAIR OPERATION Pronto® M91™Base with SureStep® 34 Part No 1143153 SPJ+, MK6i SPJ+ w/PSS and MK6i SPJ+ w/ACC Joystick Switches and Indicators NOTE: For the following information, ref e r to FIGURE 5.3. FIGURE 5.
SECTION 5—WHEELCHAIR OPERATION Part No 1143153 35 Pronto® M91™Base with SureStep® Speed Control Buttons The speed control buttons (tortoise button () and hare button () are used to set and adjust the maximum speed.
SECTION 5—WHEELCHAIR OPERATION Pronto® M91™Base with SureStep® 36 Part No 1143153 Information Gauge Display The information gauge display is located on the front .
SECTION 5—WHEELCHAIR OPERATION Part No 1143153 37 Pronto® M91™Base with SureStep® MPJ+ Joystick Switches and Indicators NOTE: For this proced ure, refe r to FIGURE 5.
SECTION 5—WHEELCHAIR OPERATION Pronto® M91™Base with SureStep® 38 Part No 1143153 2. Rotate the knob counterclockwise (backward) to decrease the speed of the wheelchair to the programmed max speed.
SECTION 5—WHEELCHAIR OPERATION Part No 1143153 39 Pronto® M91™Base with SureStep® Refer to LCD Display table on page 39 for descriptions of information shown. LCD DISPLAY ITEM DESCRIPTION DRIVE NAME This field shows the currently selected Drive’s Name.
SECTION 5—WHEELCHAIR OPERATION Pronto® M91™Base with SureStep® 40 Part No 1143153 FIGURE 5.6 LCD Display Screens - Main Screen Driving Screen NOTE: For this proced ure, refe r to FIGURE 5.
SECTION 5—WHEELCHAIR OPERATION Part No 1143153 41 Pronto® M91™Base with SureStep® FIGURE 5.8 LCD Display Screens - Co nnected Devices Screen Programmable Mono Port 1/2 or External Mode Switch Th.
SECTION 5—WHEELCHAIR OPERATION Pronto® M91™Base with SureStep® 42 Part No 1143153 Mode Switch NOTE: For this proced ure, refe r to FIGURE 5.4. The mode switch is used to select the operating mode for the wheelchair .
SECTION 5—WHEELCHAIR OPERATION Part No 1143153 43 Pronto® M91™Base with SureStep® Repositioning the Joystick Adjustable ASBA Seat NOTE: For this proced ure, refe r to FIGURE 5.
SECTION 5—WHEELCHAIR OPERATION Pronto® M91™Base with SureStep® 44 Part No 1143153 6. If necessary , perform the following to reposition the adjustment lock: A. Slide the adjustment lock from the mo unting bracket.
SECTION 5—WHEELCHAIR OPERATION Part No 1143153 45 Pronto® M91™Base with SureStep® MPJ+ Joysticks NOTE: For this proced ure, refe r to FIGURE 5.13. Disconnecting 1. Pull the latch aw ay from the joystick connector .
SECTION 6—SEAT Pronto® M91™Base with SureStep® 46 Part No 1143153 SECTION 6—SEAT WARNING After any adjustments, repair or service and before us e, make sure th at all attaching hardware is tightened securely - othe rwise injury or damage may result.
SECTION 6—SEAT Part No 1143153 47 Pronto® M91™Base with SureStep® Installing 1. P osition the seat in the rear piv ot brackets as shown in FIGURE 6.1. 2. Tilt front edge of seat down.
SECTION 6—SEAT Pronto® M91™Base with SureStep® 48 Part No 1143153 Tilting the Seat Assembly Back 1. Place the wheelchair in a wel l ventilated area where work can be performed without risking damage to carpeting or floor covering.
SECTION 7—FOOTBOARD ASSEMBLY Part No 1143153 49 Pronto® M91™Base with SureStep® SECTION 7—FOOTBOARD ASSEMBLY WARNING After any adjustments, repair or service and before us e, make sure th at all attaching hardware is tightened securely - othe rwise injury or damage may result.
SECTION 7—FOOTBOARD ASSEMBLY Pronto® M91™Base with SureStep® 50 Part No 1143153 FIGURE 7.1 Removing/Installing the Footboard Assembly Adjusting the Footboard Assembly Angle NOTE: For this proced ure, refe r to FIGURE 7.2.
SECTION 7—FOOTBOARD ASSEMBLY Part No 1143153 51 Pronto® M91™Base with SureStep® Depth NOTE: For this proced ure, refe r to FIGURE 7.3. 1. Remove the quick release pin that secures the footboard assembly to the wheelchair frame.
SECTION 8—SHROUD/WHEELS Pronto® M91™Base with SureStep® 52 Part No 1143153 SECTION 8—SHROUD/WHEELS WARNING After any adjustments, repair or service and before us e, make sure th at all attaching hardware is tightened securely - othe rwise injury or damage may result.
SECTION 8—SHROUD/WHEELS Part No 1143153 53 Pronto® M91™Base with SureStep® Installing 1. P erform one of the following: •T o p Shroud ‐ Po s i t i o n top s.
SECTION 8—SHROUD/WHEELS Pronto® M91™Base with SureStep® 54 Part No 1143153 Engaging/Disengaging Motor Release Lever WARNING DO NOT engage or disengage the motor releas e lever until the On/Off switch on the joystick is in the Off position.
SECTION 8—SHROUD/WHEELS Part No 1143153 55 Pronto® M91™Base with SureStep® Replacing Front/Rear Caster Assemblies NOTE: For this proced ure, refe r to FIGURE 8.3. NOTE: Front and rear caster assemblies are rep l a ce d in the same manner .
SECTION 9—BATTERIES Pronto® M91™Base with SureStep® 56 Part No 1143153 SECTION 9—BATTERIES WARNING Make sure power to the wheelchair is Off before performing this section. NEVER allow any of your tools and/or b attery cable(s) to contact both battery terminal(s)/post(s) at the same time.
SECTION 9—BATTERIES Part No 1143153 57 Pronto® M91™Base with SureStep® Installing/Removing the Batteries NOTE: For this proced ure, refe r to FIGURE 9.1 on page 58 and FIGURE 9.2 on page 59.
SECTION 9—BATTERIES Pronto® M91™Base with SureStep® 58 Part No 1143153 9. If necessary , connect the wiring harness to the two batteries. Refer to Connecting/ Disconnecting the Battery Wir i n g Harness on page 60.
SECTION 9—BATTERIES Part No 1143153 59 Pronto® M91™Base with SureStep® FIGURE 9.2 Installing/Removing the Batteries Removing 1. Place the wheelchair in a wel l ventilated area where work can be performed without risking damage to carpeting or floor covering.
SECTION 9—BATTERIES Pronto® M91™Base with SureStep® 60 Part No 1143153 NOTE: Perform this section on one battery at a time starting with the FRONT battery . Repeat STEP 10 to remo v e remaining battery from battery tray .
SECTION 9—BATTERIES Part No 1143153 61 Pronto® M91™Base with SureStep® 7. Reposition battery terminal cov ers over battery post(s). 8. Using new tie ‐ wraps, se cure the terminal cov ers to th e battery terminals as shown in FIGURE 9.
SECTION 9—BATTERIES Pronto® M91™Base with SureStep® 62 Part No 1143153 When to Charge Batteries SPJ+ Joysticks NOTE: For this proced ure, refe r to FIGURE 9.
SECTION 9—BATTERIES Part No 1143153 63 Pronto® M91™Base with SureStep® Charging Batteries DANGER When using an extension cord , use only a three wire extension cord having at least 16 AWG (American Wire Gauge) wire and the same or high er electrical rating as the devise being c onnected.
SECTION 9—BATTERIES Pronto® M91™Base with SureStep® 64 Part No 1143153 Battery Charger Operation WARNING READ and CAREFULLY follow the manufactur er’s instructions for each charger (supplied or purchased). If charging instru ctions are not supplied, consult a qualified technician for proper procedures prior to use.
SECTION 9—BATTERIES Part No 1143153 65 Pronto® M91™Base with SureStep® WARNING DO NOT operate wheelchair with AC po wer cord attached to the wheelchair. FIGURE 9.6 On-Board Battery Charger Independent Charger WARNING READ and CAREFULLY follow the individual instructions for each charger (supplied or purchased).
SECTION 9—BATTERIES Pronto® M91™Base with SureStep® 66 Part No 1143153 Required Items: 1. Attach the battery charger connector to the charger port on the joystick.
SECTION 10—TRANSPORT READY PACKAGE Part No 1143153 67 Pronto® M91™Base with SureStep® SECTION 10—TRANSPORT READY PACKAGE NOTE: The information in this section is for wheelchairs ordered with the tran sport re a dy package ONLY .
SECTION 10—TRANSPORT READY PACKAGE Pronto® M91™Base with SureStep® 68 Part No 1143153 About Transport Ready Packages TRRO includes four factory ‐ installed transport brackets and a wheelchair anchored pelvic belt.
SECTION 10—TRANSPORT READY PACKAGE Part No 1143153 69 Pronto® M91™Base with SureStep® Securing the Wheelchair to the Vehicle Positioning the Wheelchair in the Vehicle WARNING This wheelchair must be in a forward facing position during travel in a motor vehicle.
SECTION 10—TRANSPORT READY PACKAGE Pronto® M91™Base with SureStep® 70 Part No 1143153 Securement Points FIGURE 10.1 Securement Points Securing the Wheelchair This wheelchai r is to .
SECTION 10—TRANSPORT READY PACKAGE Part No 1143153 71 Pronto® M91™Base with SureStep® Securing the Occupant Wheelchair-Anchored Belts WARNING The pelvic belt that is provid ed by Invacare has been test ed for use in a motor vehi- cle on this wheelchair ONLY.
SECTION 10—TRANSPORT READY PACKAGE Pronto® M91™Base with SureStep® 72 Part No 1143153 Vehicle-Anchored Belts NOTE: For this proced ure, refe r to FIGURE 10.
SECTION 10—TRANSPORT READY PACKAGE Part No 1143153 73 Pronto® M91™Base with SureStep® Positioning Belts WARNING The angle of the pelv ic belt should be within the prefe rred zone of 45 to 75 degrees to the horizo ntal OR within the optional zone of 30 to 45 degrees to the horizontal.
SECTION 10—NOTES Pronto® M91™Base with SureStep® 74 Part No 1143153 NOTES.
GLOBAL LIMITED WARRANTY (EXCLUDING CANADA) Part No 1143153 75 Pronto® M91™Base with SureStep® GLOBAL LIMITED WARRANTY (EXCLUDING CANADA) PLEASE NOTE: THE WARRANTY BELOW HAS B EEN DRAFTED TO COMPLY WITH FEDERAL LAW APPLICABLE TO PRODUCTS MANU FACTURED AFTER JULY 4, 1975.
CANADA LIMITED WARRANTY PLEASE NOTE: THE WARRANTY BELOW HAS B EEN DRAFTED TO COMPLY WITH FEDERAL LAW APPLICABLE TO PRODUCTS MANU FACTURED AFTER JULY 4, 1975. This warranty is exten ded only to the original pu rchaser who purchases th is product within Ca nada when new and unused from Invacare or a dealer.
Un punto importante, dopo l’acquisto del dispositivo (o anche prima di acquisto) è quello di leggere il manuale. Dobbiamo farlo per diversi motivi semplici:
Se non hai ancora comprato il Invacare Wheelchair Pronto M91 Base è un buon momento per familiarizzare con i dati di base del prodotto. Prime consultare le pagine iniziali del manuale d’uso, che si trova al di sopra. Dovresti trovare lì i dati tecnici più importanti del Invacare Wheelchair Pronto M91 Base - in questo modo è possibile verificare se l’apparecchio soddisfa le tue esigenze. Esplorando le pagine segenti del manuali d’uso Invacare Wheelchair Pronto M91 Base imparerai tutte le caratteristiche del prodotto e le informazioni sul suo funzionamento. Le informazioni sul Invacare Wheelchair Pronto M91 Base ti aiuteranno sicuramente a prendere una decisione relativa all’acquisto.
In una situazione in cui hai già il Invacare Wheelchair Pronto M91 Base, ma non hai ancora letto il manuale d’uso, dovresti farlo per le ragioni sopra descritte. Saprai quindi se hai correttamente usato le funzioni disponibili, e se hai commesso errori che possono ridurre la durata di vita del Invacare Wheelchair Pronto M91 Base.
Tuttavia, uno dei ruoli più importanti per l’utente svolti dal manuale d’uso è quello di aiutare a risolvere i problemi con il Invacare Wheelchair Pronto M91 Base. Quasi sempre, ci troverai Troubleshooting, cioè i guasti più frequenti e malfunzionamenti del dispositivo Invacare Wheelchair Pronto M91 Base insieme con le istruzioni su come risolverli. Anche se non si riesci a risolvere il problema, il manuale d’uso ti mostrerà il percorso di ulteriori procedimenti – il contatto con il centro servizio clienti o il servizio più vicino.
