Manuale d’uso / di manutenzione del prodotto LS del fabbricante Hoover
Vai alla pagina of 14
The Easy to Use Deep Cleaner with automatic tool conversion ® ™ SteamV ac™ Deep Cleaner cleans carpet fibers by applying hot tap water and cleaning solution.
2 Fill in and Retain This HOOVER deep cleaner is designed for deep cleaning carpet, rugs, carpeted stairs and upholstery . The model and serial numbers are located on the data label on the back of the handle. For your personal records, please enter the COMPLETE model and serial numbers in the spaces provided and retain this information.
3 Gr ounding Instructions This appliance must be grounded. If it should malfunction or breakdown, grounding pr ovides a path of least resis- tance for electrical current to r educe the risk of electric shock. This appliance is equipped with a cord having an equip- ment-grounding conductor (C) and grounding plug (A).
Attach hose holder Position hose holder (B) onto handle by matching tabs on rack with openings on back of handle. Make sure holes for bolts are aligned. 4 The assembled cleaner will look like this drawing. 1-2 Attach upper handle Remove clean solution tank (upper tank) from deep cleaner .
5 1-10 1-11 1-12 1-13 1-14 1-15 1-17 Slide rack down into place. Insert screw at (D) and tighten with a Phillips screw- driver . D F E Storing hose & tools Stor e hose on holder by first positioning hose in front section of holder . Continue wrapping hose under lower hook (E).
6 1. Hand grip 2. Solution trigger: press to release clean solution. 3. Cord clip: place cord in clip to keep it out of the way when using cleaner 4. Hose 5. Hose holder: wrap hose around holder and hooks (6) for storage. 6. Hose hooks 7. Cord hooks: wrap cord around hooks for storage.
7 Brush Speed OFF HI LO 2-5 2-6 2-7 2-8 2-9 2-10 The deep cleaner may also be lifted by placing a hand under the upper clean solution tank handle as shown. Automatic “shut of f” When the recovery tank (lower tank) is full the automatic shutoff mechanism will shut off the deep cleaner suction (suction will be noticeably reduced).
8 2-11 2-12 Rotate tank cap counterclockwise and lift up to remove cap. T urn cap (A) upside down to serve as a measuring cup. 5 OUNCES/ 150 ml A D C 2-13 2-14 2-15 2-16 Using cap, measure detergent following the chart below . For carpet, carpeted stairs and uphol- stery: Fill cap to fill line (5 ounces) with HOOVER Carpet/Upholstery Detergent.
9 2-18 Raise handle to carrying position (straight up) to unlock tank from base of deep cleaner . Lift tank from deep clean- er and carry it to a sink or drain. T o remove tank lid, lower handle com- pletely toward back of tank and lift of f lid. Empty the tank and reposition the lid.
10 Some models have a nozzle clean-out tool for removing debris or if a non-car- peted floor is not available. T o use the tool: Disconnect deep cleaner from electrical outlet. Slide tool into nozzle and remove debris as shown. T o clean the outside of the machine, wipe off dirt with a cloth dampened in warm water and mild detergent.
11 Using the tools 4. Retur n deep cleaner to upright posi- tion. Lower handle and replace r ecover y tank. 5. Raise handle to upright position and reposition clean solution tank. T o clean floor Read Before you begin cleaning instructions on page 9. Do not use the SteamV ac deep clean- er on hardwood floors.
3-14 9. Lift tool, and position it against riser . Pull tool slowly over carpet without pressing trigger (dry stroke). It is best to alternate wet and dr y strokes as described above. End with more dry strokes to aid in faster drying of carpet. 10. Overlap strokes by 1/2 inch to help prevent str eaking.
13 3-15 3-16 Read “Before you begin cleaning” Instructions on page 9. Be sure to check the cleaning code on your upholstery . Use your HOOVER ‘SteamV ac’ deep cleaner only on upholstery marked “W” or “W/S”. 1. Place handle in upright position.
5. If you have a pr oblem 14 If a minor problem occurs, it usually can be solved quite easily when the cause is found by using the check list below . Possible cause Possible solution • Not firmly pl.
Un punto importante, dopo l’acquisto del dispositivo (o anche prima di acquisto) è quello di leggere il manuale. Dobbiamo farlo per diversi motivi semplici:
Se non hai ancora comprato il Hoover LS è un buon momento per familiarizzare con i dati di base del prodotto. Prime consultare le pagine iniziali del manuale d’uso, che si trova al di sopra. Dovresti trovare lì i dati tecnici più importanti del Hoover LS - in questo modo è possibile verificare se l’apparecchio soddisfa le tue esigenze. Esplorando le pagine segenti del manuali d’uso Hoover LS imparerai tutte le caratteristiche del prodotto e le informazioni sul suo funzionamento. Le informazioni sul Hoover LS ti aiuteranno sicuramente a prendere una decisione relativa all’acquisto.
In una situazione in cui hai già il Hoover LS, ma non hai ancora letto il manuale d’uso, dovresti farlo per le ragioni sopra descritte. Saprai quindi se hai correttamente usato le funzioni disponibili, e se hai commesso errori che possono ridurre la durata di vita del Hoover LS.
Tuttavia, uno dei ruoli più importanti per l’utente svolti dal manuale d’uso è quello di aiutare a risolvere i problemi con il Hoover LS. Quasi sempre, ci troverai Troubleshooting, cioè i guasti più frequenti e malfunzionamenti del dispositivo Hoover LS insieme con le istruzioni su come risolverli. Anche se non si riesci a risolvere il problema, il manuale d’uso ti mostrerà il percorso di ulteriori procedimenti – il contatto con il centro servizio clienti o il servizio più vicino.
