Manuale d’uso / di manutenzione del prodotto 5900 del fabbricante Honeywell
Vai alla pagina of 70
Optimus ™ 5900 RFID Mobile Computer with Windows ® CE 5.0 User’s Guide.
Disc laimer Honeyw ell International Inc. (“HII”) reser v es the right to make changes in specifications and other inf or- mation contained in this document without prior notice , and the reader should in all cases consult HII to deter mine whether an y such changes ha v e been made.
iii Chapter 1 - Agency Approvals Label Locations ................................................. ............................................................... ....1-1 Safety & RF Approvals by Country: ................ .........................
iv Chapter 5 - Using the UHF RFID Reader Overview ................................ ....................................................................................... ....... 5-1 Configuring the RFID Output .............................. .........
v eBase Technical Specifications .......................... .................................... ............................. 9-7 Chapter 10 - Customer Support Product Service and Repair ................................ ..............................
vi.
1 - 1 1 Agency Appr ov als Label Locations Optimus 5900 RFID mobile computers meet or exce ed the requirements of all applicable standards organizations for safe operation. However, as with an y electrical equipment, the best way to ensure safe operation is to operate them according to the a gency guidelines that follow.
1 - 2 • Reorient or relocate the receiving antenna. • Increase the separation between the equipment and receiver. • Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. • Consult the dealer or an experienced radio/TV technician for help.
2 - 1 2 Getting Star ted Out of the Bo x Verify that your carton c ontains the following items: • Optimus 5900 RFID mobile computer (the terminal) • Main battery pack (3.
2 - 2 3. Insert the battery into the battery we ll with the contacts facing downward. 4. Replace the door with a hinging motion and turn the screw clockwise to lock the door. Note: The battery door must be installed prior to booting the unit. We recommend use of Honeywell Li-Ion ba ttery packs.
2 - 3 Step 2. Charge the Batteries We recommend use of Honeywell peripherals, po wer cables, and power adapters. Use of any non- Honeywell peripherals, cables, or power adapters may cause damage not covered by the warranty. DO NOT attempt to charge damp/wet mobile comput ers or batteries.
2 - 4 Desktop Note: You can access the Desktop any time by tapping t he Change Views icon in the command bar and selecting Desktop on the popup menu. Command Bar Icons The command bar, located at the bottom of appl ication screens, provides access to many system functions and programs.
2 - 5 Using the Stylus The terminal comes with a stylus inserted in the handle. Use this stylus (or your finger) to select or enter information on the touch screen. The stylus functions as a mouse; genera lly, a tap is the same as a click. Tap Tap the touch screen once or double tap to open menu items and select options.
2 - 6 Selecting Pr ograms Tap Start > Programs . To open a program, tap the icon on the menu. P op-Up Menus You can quickly choose an action fo r an item using the pop-up menus. 1. Tap and hold the stylus on the item name. The pop-up menu appears. 2.
3 - 1 3 T erminal Har dware Overvie w Optimus 5900 RFID terminals include a number of stan dard terminal configurations as well as charging and communication peripherals and accessories to maxi mize the efficiency of your application setting.
3 - 2 Fr ont P anel Features Scan/Decode LED The LED lights red when a scan fails. The LED lights green when a scanned bar code is successfully decoded. The LED lights red while the main battery is charging. The LED lights green when the main battery charging is completed.
3 - 3 Use of objects, such as paper clips, pencils, or ink pens on the to uch screen can damage the input panel and may cause dama ge not covered by the warranty.
3 - 4 Honeywell’s warranty policy covers wear on the touch panel for the first 12 months provided that a screen protector is applied and an approved stylus is used for the 12-month duration covered by the warranty. Removing the Screen Pr otector Optimus 5900 RFID terminals ship with a touch screen pr otector already installed.
3 - 5 3. Release the left edge of the backing paper on the screen protector and align the exposed edge of the screen protector along the left edge of the touch panel. Make sure that it lies flush with edges of the touch panel Note: To reposition the screen pr otector, lift up gently and reapply.
3 - 6 5. Press the Power key to wake the terminal and check the touch panel with the stylus. 6. Verify that the screen accepts input from the styl us as usual. If not, re-app ly the screen protector. 7. Press the orange Power button to put the terminal back in Suspend Mode.
3 - 7 11. Tap Recalibrate and follow the instructions on the screen. Bac k P anel Features Battery Well For information about installing the battery, see Changing the Main Battery Pack on page 3-12. For information about battery power, see Battery Power on page 3-11.
3 - 8 Stylus Optimus 5900 RFID terminals ship with a stylus inserted in handle. Store the stylus in the handle when you are not using it; see Using the Stylus on page 2-5. Right Side P anel Features Side Button There is a button like this on both side panels .
3 - 9 Left Side P anel Features Side Button There is a button like this on both side panels . You can use the Programs Buttons option in the Control Panel to change the functionality of the side buttons. Headset Jack The rubber door on the left side panel provides access to the headset jack.
3 - 10 Bottom P anel Features DC Power Jack The DC power jack receives external power from the Optimus 5900 RFID terminal’s power cable that is included in the box with the te rminal. When connected to the power cable, the terminal is powered and the main battery pack is charging.
3 - 11 P eripherals/Accessories for the Optim us 5900 RFID T erminal The following items are sold separa tely and enhance your Optimus 59 00 RFID terminal’s capabilities.
3 - 12 Changing the Main Batter y P ac k Before installing a battery pack, press the Power button to put the terminal in Suspend Mode (see page 3-15) so that operations are suspended before re moving the main power source. The Optimus 5900 RFID terminal is shipped with the battery separate from the unit.
3 - 13 Checking Battery P owe r Power icons appear in the command bar at the bottom of the window. Double tap on the battery icon to open the Power Properties.
3 - 14 Internal Bac kup Battery Located inside the terminal, the backup ba ttery is a 3.7V Lithium Polymer battery. The internal backup battery prevents the terminal fr om being reset when you remove the main battery pack. This backup battery retains RAM data and allows the real-time clock to remain operational for at least 30 minutes.
3 - 15 Hard resets automatically launch a soft reset as par t of the boot process if there are CAB files present. You would perform a Hard Reset (instead of a Soft Re set) when you want to ensure the RAM memory is also cleared. RAM memory stores settings for In ternet Explorer, Outlook, and other Microsoft applications.
3 - 16 Optim us 5900 RFID T echnical Specifications Operating System Microsoft Windows CE 5.0 Prof essional Development En vironment UHF Reader Module Library Reference Processor PXA300 624MHz Memory 128MB RAM X 256MB Flash Expansion Memory User accessible Micro SD Card (h igh capacity up to 32GByte).
3 - 17 Operating T emperature 14° to122°F (-10° to 50°C) Charging T emperature 32° to 113°F (0° to 45°C) Storage T emperature -4° to 158°F (-20° to 70°C) Humidity 95% humidity , non-condensing Construction High impact resistant PC/ABS housings Magnesium allo y internal chassi s with component shock mounts Drop 4 ft.
3 - 18.
4 - 1 4 Using the K eypad Overview The keypad is as follows: Navigation K eys The navigation keys enable you to move the cursor up and down lines and from character to character.
4 - 2 Basic Ke ys Alpha/Numeric Modes The keypad defaults to numeric mode. Use the ALPHA key to toggle between numeric and alpha modes. Pressing the ALPHA key locks the keypad in numeric mode, al pha mode (lowercase), or alpha mode (uppercase). The command bar on the screen displays an icon that indicates the alpha/numeric status of the keypad.
4 - 3 Function Ke y Combinations The FUNC (Function) key modifies the next key pressed to perform specific functions. CTRL Ke y Combinations Hold down the Control key ( CTRL ) and then press a key with the red characters above it to type the desired character.
4 - 4 Pr ogram Buttons F1-F4 buttons can be programmed to execute differen t functions using the Program Button program in the Control Panel. CTRL + 0 * CTRL + SP + (plus) Ke y Combination Function.
5 - 1 5 Using the UHF RFID Reader Overview The Optimus 5900 RFID terminal houses a UHF RFID rea der that allows you to read multiple/single RFID tags and read/write/lock/kill the memory of single tags From the Today screen, select Programs > Demos > RFID Demo .
5 - 2 Configuring the RFID Output In the Reader Configuration screen, you can change th e settings for output of the reader, Q value, the operating frequency and the reader RF test. Select Cfg on the main RFID demo screen. Cfg Cfg sets output of a terminal or frequency of Q v alue.
5 - 3 Reading T ags 1. EPC Gen2 Tags have four kinds of Banks (Reserve d, EPC, TID, USER). Select the Bank that you want to read in the Bank field. 2. Input a memory starting position (in bytes) from where you want to read in the Start box and the desired size (in bytes) from a starting position to the window.
5 - 4 T ag Writing 1. EPC Gen2 Tags have four kinds of Banks (Reserve d, EPC, TID, USER). Select the Bank that you want to write in the Bank field. 2. Input a memory starting position (in bytes) from where you want to write in the Start box and the desired size (in bytes) from a starting position to the window.
5 - 5 T ag Loc k/Kill EPC Gen2 Tags allow the locking and killing tags. Lock prevents reading of or writing to a tag. Kill makes a tag permanently undetectable. Kill The Access and Kill passwords represented by hexade cimal numbers other than 00H are required to Kill a tag.
5 - 6.
6 - 1 6 Using the Image Engine Overview The Optimus 5900 RFID terminal houses a compact image engine using Adaptus ™ Imaging Technology that instantly reads all popular 1D and 2D bar codes and supports omni-directional aiming and decoding. The image engine can also capture digital images, such as signatures and pictures.
6 - 2 Suppor ted Bar Code Symbologies Symbology T ype Symbology Name 1D Symbologies Codabar Code 3 of 9 Code 11 Code 32 Pharmaceutical (P ARAF) Code 93 Code 128 EAN with Add-On EAN with Extended Coupo.
6 - 3 Activ a ting the Engine When a scanning application is open, press the Scan key to activate the image engine. Using Demos Optimus 5900 RFID Demos are software utilities loaded on all Optimus 5900 RFID terminals that demonstrate the advanced features of the terminal.
6 - 4 Omni-Directional Scanning P ositions The high-vis aiming pattern frames the bar code to provide you with the best scanning performance. Note: To achieve the best read, the aiming beam shoul d be centered horizontally across the bar code.
6 - 5 Capturing Images The image-capture process is an intuitive, split-second operation for experienced users. By following basic guidelines, however, new users can easily deve lop their own technique and, with practice, quickly learn to adapt to different application environments.
6 - 6.
7 - 1 7 Comm unication Comm unication Options Optimus 5900 RFID terminals offer several communicati on options including Microsoft ActiveSync and wireless radios.
7 - 2 Comm unication T ype The Optimus 5900 RFID terminal supports the follow ing type of communication via ActiveSync through its DC Power Jack (see page 3-10) on the bottom panel: USB The USB cable .
7 - 3 Tap Change Connection to change the current settings. Connection Options Select this option to … ‘USB Establish a USB connection. Comm unicating with the Optim us 5900 RFID T erminal After setting up both the workstation and the termi nal, ActiveSync connection should be automatic.
7 - 4 The Mobile Device folder opens in Windows Explorer. The Optimus 5900 RFID terminal is now treated as a mass storage device, and transferring files is as simple as dragging and dropping or copying and pasting as you would for moving files between folders on your hard drive.
7 - 5 If the File is Not an Installer Some programs cannot be installed on workstations because they are designed exclusively for Windows CE devices. In these cases, the appropriate files mu st be stored on the host workstation and transferred to the terminal via ActiveSync Explore.
7 - 6 WLAN (802.11g Radio) Optimus 5900 RFID terminals can have a 2.4 GHz 80 2.11g WLAN (Wireless Local Area Network) radio that uses Direct Sequence Spread Spectrum (DSSS) technology.
7 - 7 4. Select the Profile tab and press Scan . 5. Select the appropriate SSID and select Configure . If the Active Profile does not appear, perform the scan again by pressing Refresh .
7 - 8 Setting the A uto Profile Follow the steps below to change to a different Active Profile. 1. Select List from the Main tab. The current Active Profile list appears. 2. Select the Profile to be set and press OK . 3. Select the Auto Profile On radio button.
8 - 1 8 Bluetooth Handler Bluetooth wireless technology is a short-range comm unications technology to connect portable and/or fixed devices while maintaining high levels of security. Enabling the Bluetooth Radio 1. Select the UP arrow in the lower, right portion of the display.
8 - 2 OR Wait until all Bluetooth devices in range have been scanned. Then the Scan Dialog window appears. 6. Scroll through the list until your Bluetooth printer device is found. You may single tap any device in the list to display its MAC address. 7.
9 - 1 9 Optim us 5900 RFID eBase Device (Model: 5900-EHB) Overview The Ethernet Base (eBase) enables a single O5900 te rminal to communicate with a host device over an USB, serial RS-232, or Ethernet network. The 5900-EHB charger is designed for use with batt ery pack models BP08-000640 (standard Li-poly 3.
9 - 2 Fr ont P anel Terminal Well Place the Optimus 5900 RFID terminal in the term inal well to communicate with a host device, power the terminal, and charge the terminal’s battery. Make sure that the device is securely seated. Rubber Feet The bottom panel has four rubber feet to stabilize the unit on a flat surface.
9 - 3 Bac k P anel DC Power Jack Connect the power cable to this power jack; see Powering the Optimus 5900 RFID eBase Device on page 9-4. USB Port The USB port is full-speed (v1.1). Using the USB cable, you can connect the base to a USB- compliant device to facilitate USB communi cation to and from the terminal.
9 - 4 P owering the Optim us 5900 RFID eBase Device The terminal requires 5 volts DC input for communica tion and battery charging; the power adapter on the power cable converts the voltage from the power sour ce to 5 volts DC. Only power adapter cables from Honeywell convert the voltage appropriately.
9 - 5 The base can also charge a second battery while th e terminal is positioned in the base. The second battery can be inserted in the battery charging well in back of the terminal connection. Place the battery in the well with the label facing up and toward the back of the unit.
9 - 6 2. Plug the CAT-5 Ethernet cable into th e RJ45 connector on the back of the eBase. 3. Plug the Ethernet cable into the network. 4. Insert the Optimus 5900 RFID terminal into the terminal well. Note: Instead of using the default for DHCP assigned IP a ddresses, the Optimus 5900 RFID terminal can use a statically assigned IP address.
9 - 7 eBase T echnical Specifications Structural Dimensions 3.74in. high x 4.13in. width x 6.14in. depth (9.5cm x 10.5cm x 15.6cm) We ig h t Optimus 5900 RFID eBase - 12.
9 - 8.
10 - 1 10 Customer Suppor t T echnical Assistance If you need assistance installing or troubleshooting your device, please contact us by using one of the methods below: Knowledge Base: www.hsmknowledgebase.com Our Knowledge Base provides thousa nds of immediate solutions.
10 - 2 HII’S RESPONSIBILITY AND PURCHASER’S EXCL USIVE REMEDY UNDER THIS WARRANTY IS LIMITED TO THE REPAIR OR REPLACEMENT OF THE DEFECTIVE PRODUCT WITH NEW OR REFURBISHED PARTS.
.
™ Honeywell Scanning & Mobility 9680 Old Bailes Road Fort Mill, SC 29707 www.honeywellaidc.com 5900-UG Rev B 8/12.
Un punto importante, dopo l’acquisto del dispositivo (o anche prima di acquisto) è quello di leggere il manuale. Dobbiamo farlo per diversi motivi semplici:
Se non hai ancora comprato il Honeywell 5900 è un buon momento per familiarizzare con i dati di base del prodotto. Prime consultare le pagine iniziali del manuale d’uso, che si trova al di sopra. Dovresti trovare lì i dati tecnici più importanti del Honeywell 5900 - in questo modo è possibile verificare se l’apparecchio soddisfa le tue esigenze. Esplorando le pagine segenti del manuali d’uso Honeywell 5900 imparerai tutte le caratteristiche del prodotto e le informazioni sul suo funzionamento. Le informazioni sul Honeywell 5900 ti aiuteranno sicuramente a prendere una decisione relativa all’acquisto.
In una situazione in cui hai già il Honeywell 5900, ma non hai ancora letto il manuale d’uso, dovresti farlo per le ragioni sopra descritte. Saprai quindi se hai correttamente usato le funzioni disponibili, e se hai commesso errori che possono ridurre la durata di vita del Honeywell 5900.
Tuttavia, uno dei ruoli più importanti per l’utente svolti dal manuale d’uso è quello di aiutare a risolvere i problemi con il Honeywell 5900. Quasi sempre, ci troverai Troubleshooting, cioè i guasti più frequenti e malfunzionamenti del dispositivo Honeywell 5900 insieme con le istruzioni su come risolverli. Anche se non si riesci a risolvere il problema, il manuale d’uso ti mostrerà il percorso di ulteriori procedimenti – il contatto con il centro servizio clienti o il servizio più vicino.
