Manuale d’uso / di manutenzione del prodotto rm-ltx7000dy del fabbricante Hitachi
Vai alla pagina of 29
RM-L TX7000D Y RM-L TX7000 交流/充電式兩用 A C/RECHARGEABLE ֵ⭞䃠᱄ᴮ INSTRUCTIONS ਠ֒ᇬቻ⭞䙊 For household use only Made in Japan 日本製造 㒣䦉*6:25' ȝ方.
.
1 4 3 2.
8 13 14 15 16 17 18 19 20 21 22 5 9 6 10 1 1 12 7 （ ） 〔 〕 90° (1) (2).
23 24 25 26 27 28 29 30 31 32 33 34 (1) (1) (2) (1) (2).
English -1- Safety precautions Items described here are for using the product safely and properly , and to prevent hazards and injury to the user and other persons before they occur . Items are classified as follows. All items are important descriptions related to safety , therefore make sure to observe them.
-2- Do not use the power adaptor and LED light dryer in a place where water is splashed, such as a bathroom, or in a place with high humidity . (Cause of electric shocks and short circuits) Detach the hand-held part from the supply cord before cleaning it in water .
-3- Safety precautions 1. Never use cream or gel shaving agents. Cause of clogging and damage to the blade. 2. Never soak the blade in water . Cause of damage to the shaver . 3. Never dry it using a dryer or a fan heater , etc. Cause of deformation or damage to the shaver .
-4- Catch Attachment/detachment button Fan (Built-in) Charger socket Insert the plug for equipment of the power adaptor . Power adaptor : KH-187B Power plug Insert this into the outlet to its base. Plug for equipment Cord Cleaning brush Shaver oil Pouch Charging completion lamp During charge: The lamp turns on.
Caution When the switch is turned "ON," this cannot be charged. When the capacity of the battery is sufficient, the charging completion lamp may be turned off early .
-6- How to use It is recommended to use the shaver at an ambient temperature of 5°C to 35°C. Use or storage at a temperature below the recommended temperature may disable the shaver or cause a reduced number of operating times. For initial use, trim while lightly applying the shaver to skin.
-7- Power mode Beard can be shaved strongly and quickly at the time of start or in response to a thick beard. (Fig.1 1) The auto lamp is "turned off." The mode indicator "lights (blue)." Normal Mode Beard can be shaved comfortably and softly in response to normal beard and finishing.
-8- How to keep a comfortable sharpness After use (especially shaving with soap), make sure to perform maintenance. Make sure to wash the foil-cutter assembly with water . Accumulation of beard clippings will cause deterioration in sharpness or scattering of beard clippings.
-9- 4. Press the lower part of the head holder removal button to attach the head holder . (Fig.21) Make the front face of the head holder face the switch side for attachment. Caution The head holder cannot be connected in a state where it is facing back to front.
-10- 6. After drying, apply the shaver oil, and keep it in a place free from moisture. 5. After completion, take out the main body , and disconnect the power adaptor from the outlet. Caution : Never wash the LED light dryer with water . (Cause of failures) Brush cleaning Never clean the foil-cutter assembly with a brush.
-11- 1. T urn "OFF" the switch to remove the cap and head holder. (Fig.17) Press the head holder removal button (1) to remove the head holder in the arrow (2) direction.
-12- - Failure of drying with the LED light dryer Check for accumulation of dust, etc., inside the LED light dryer . Periodically perform maintenance. Check to see if water drops on the main body and blade surface have been wiped off after washing with water .
-13-.
-14-.
-15-.
-16-.
-17-.
-18-.
-19-.
-20-.
-21-.
-22-.
-23-.
-24-.
Un punto importante, dopo l’acquisto del dispositivo (o anche prima di acquisto) è quello di leggere il manuale. Dobbiamo farlo per diversi motivi semplici:
Se non hai ancora comprato il Hitachi rm-ltx7000dy è un buon momento per familiarizzare con i dati di base del prodotto. Prime consultare le pagine iniziali del manuale d’uso, che si trova al di sopra. Dovresti trovare lì i dati tecnici più importanti del Hitachi rm-ltx7000dy - in questo modo è possibile verificare se l’apparecchio soddisfa le tue esigenze. Esplorando le pagine segenti del manuali d’uso Hitachi rm-ltx7000dy imparerai tutte le caratteristiche del prodotto e le informazioni sul suo funzionamento. Le informazioni sul Hitachi rm-ltx7000dy ti aiuteranno sicuramente a prendere una decisione relativa all’acquisto.
In una situazione in cui hai già il Hitachi rm-ltx7000dy, ma non hai ancora letto il manuale d’uso, dovresti farlo per le ragioni sopra descritte. Saprai quindi se hai correttamente usato le funzioni disponibili, e se hai commesso errori che possono ridurre la durata di vita del Hitachi rm-ltx7000dy.
Tuttavia, uno dei ruoli più importanti per l’utente svolti dal manuale d’uso è quello di aiutare a risolvere i problemi con il Hitachi rm-ltx7000dy. Quasi sempre, ci troverai Troubleshooting, cioè i guasti più frequenti e malfunzionamenti del dispositivo Hitachi rm-ltx7000dy insieme con le istruzioni su come risolverli. Anche se non si riesci a risolvere il problema, il manuale d’uso ti mostrerà il percorso di ulteriori procedimenti – il contatto con il centro servizio clienti o il servizio più vicino.
