Manuale d’uso / di manutenzione del prodotto 42PD7200 del fabbricante Hitachi
Vai alla pagina of 57
ÕÀÊ *>Ã>Ê Ã«> Þ Model PW2 42PD7A10 1-,¿-Ê 1 1Ê1/-/1, ,Ê /Ê -/, 1/" -Ê -.
( 3 ) , ' . % 1-,¿-Ê 1 />ÊÞÕÊ ÛiÀÞÊ ÕVÊvÀÊ «ÕÀV>Ã}ÊÌiÊ / Ê*>Ã>Êë>Þ.
2 Important Please read this User's Manual thor oughly , especially the Safety Instructions on Page 4 to 7. Mis-use may cause damage to your plasma monitor , which could shorten its lifespan, or cause injur y to yourself.
3 ENGLISH CONTENTS FEA TURES ....................................................2 SAFETY INSTRUCTIONS ..............................4 IMAGE RETENTION OF PLASMA DISPLA Y ..8 COMPONENT NAMES ..................................9 Main Unit ...............
4 SAFETY INSTRUCTIONS About the Symbols This Plasma monitor has been designed and manufactured to meet international safety standards, but like any electrical equipmen t, care must be taken if you are to obtain the best results and safety is to be assured.
5 ENGLISH W ARNING Be cautious of the power cord connection. Incorrect connection of the power cor d could result in fire or electrical shock. • Do not touch the power cord with a wet hand. • Check that the connecting portion of the power cor d is clean (with no dust), befor e using.
6 CAUTION PRECAUTIONS Be careful in moving the monitor . Neglect could result in an injury or damage. • Do not move the monitor during use. Before moving, disconnect the power plug and all external connections. • Y ou are advised to move the monitor with two persons.
7 ENGLISH Prevention of an obstacle to Radio r eceivers This monitor has been designed pursuant to the international EMI standards. This is to prevent a pr oblem to Radio receivers. • Keep the monitor away from Radio. • Adjust Radio antennas in order for the monitor not to r eceive interference.
8 IMAGE RETENTION OF PLASMA DISPLA Y There are different characteristics that result in panel image retention depending on how the plasma display is used.
9 ENGLISH COMPONENT NAMES Main Unit Control panel • Adjustment buttons are located on the bottom. • The back cover is provided with indications to distinguish the adjustment buttons.
10 Remote contr ol POWER button INPUT SELECT buttons MENU button OK button SOUND MODE button VOLUME UP/DOWN button PROGRAM SELECT buttons (TV) MUL TI MODE button RECALL button FUNCTION SELECT button D.
11 ENGLISH Dynamic Natural Cinema Movie Music Favourite Speech PICTURE MODE Y ou may recall the picture mode by pressing this button. Each time pr essed, picture mode is changed in following sequence. INPUT SELECT Press this button to change input mode.
12 TV / TEXT button CANCEL button INDEX button TEXT / TV + TEXT button P AGE UP / DOWN button COLOUR buttons (RED, GREEN, YELLOW , BLUE) SUB TITLE button REVEAL button Buttons on Remote Control This switches the receiver between the TV mode and the TELETEXT mode.
• In order to pr event an inter nal temperature incr ease, maintain a space of 10cm (4 inches : For a desktop set-up) or more between the sides and other objects such as walls, etc.
14 Connecting to an Audio V isual Device (1) Make sure that the power switch of the monitor is turned off. (2) Make sure that the power switch of the audio visual device is turned off.
15 ENGLISH Precautions when connecting the antenna • Please use a coaxial cable which is free fr om inter ference to connect the antenna. A void using a parallel flat feeder wire as interference may occur , causing reception to be unstable and stripe noise to appear on the scr een.
16 Connecting to a PC (1) Make sure that the display signal of the personal computer to be used is compatible with the specifications of this device. • See “PRODUCT SPECIFICA TIONS” concerning the specifications of this device. . (2) Make sure that the power switch of the personal computer is turned off.
17 ENGLISH Mounting the Speaker Unit INST ALLA TION INSTRUCTIONS (continued) Make sure that the main power switch of the monitor is turned off (standby or indicating lamp: off/r ed) when removing or connecting the speaker cables. CA UTION Make sure to use the speaker systems fastened with the speaker holders and the screws.
18 Mounting the Speaker Unit (continued) INST ALLA TION INSTRUCTIONS (continued) 4. Attach the speaker cables to speaker systems. Connect the copper - colored wire to the Red side.
NOTE About the fixing screw for the Side Input • The screw for fixation is attached on the holder with the tape as shown below . 19 ENGLISH Mounting the Side Input INST ALLA TION INSTRUCTIONS (continued) • With the speaker unit 1. Mount the side input into the speaker holder .
20 INST ALLA TION INSTRUCTIONS (continued) Connect the power cord, after completing all other connections. Connect the power cord to this device. Connect the power cord plug to the power outlet. (The type of plug is different from this drawing for some countries.
21 ENGLISH OPERA TING INSTRUCTIONS Indicating lamp Main power switch SUB-POWER button POWER button T urning Power On and Off • T o turn the monitor power ON, press the main power switch on the monitor main unit to ON, and then press the SUB POWER button of control panel or the POWER button on the remote control.
22 OPERA TING INSTRUCTIONS (continued) INPUT SELECT button CHANNEL UP/DOWN buttons Input Switching Size Switching • Input can be switched by pressing the A V1~6, RGB1 or RGB2 buttons of the remote control. • Input can be switched to TV by pressing CHANNEL UP/DOWN buttons or PROGRAM SELECT buttons.
23 ENGLISH V ertical picture position can be adjusted for [Panoramic], [Zoom] , [C14:9L] and [14:9Zoom] mode as follows. 1. Press SIZE button and SELECT buttons during picture size display . 2. Position display will appear . 3. Adjustment range of each picture size ar e as shown below .
24 OPERA TING INSTRUCTIONS (continued) Audio Mute V olume Adjustment The audio volume can be temporarily muted by pressing the MUTE button of the remote control. The volume can be adjusted by pressing the and buttons of the remote control (or the and volume buttons of the monitor unit).
25 ENGLISH OPERA TING INSTRUCTIONS (continued) Power Swivel • This feature contr ols the motorized stand. It allows tur ning the plasma display left or right using the remote contr ol. Make sure that the main power switch of the monitor is turned off when r emoving or connecting the power cord, the connector cables, and the speaker cables.
26 OPERA TING INSTRUCTIONS (continued) Input Signal Scr een Display The input signal status can be displayed on the screen by pressing the RECALL button of the remote control. • The display will go out in approximately 6 seconds. 1 ABCDE - - - - Min.
27 ENGLISH OPERA TING INSTRUCTIONS (continued) Displaying MUL TI PICTURE If the MUL TI PICTURE button on the remote control is pressed, multi pictures will display . And then three types of the screen can be selected by pressing the MUL TI MODE button on the remote control.
28 Activating the Split mode from the video input screen Pressing the MUL TI PICTURE button one time will display 2 pictures. • The speaker icon can be shifted left and right by pressing the and SELECT buttons. The audio of the video will be output from the side on which the speaker icon is located.
29 ENGLISH OPERA TING INSTRUCTIONS (continued) FREEZE button Pictur e Fr eezing When the FREEZE button on the remote control is pressed, the screen transfers into the freeze mode. • There ar e two types of freezing screen mode, Split and Str obe. These are possible to select at the “Fr eeze Mode” setting of the Function Menu.
30 OPERA TING INSTRUCTIONS (continued) MENU button RECALL button SELECT/ADJUST button (, , , ) OK button RETURN button Using the Menu Scr een (On-scr een display system) When the MENU button is presse.
31 ENGLISH Picture Audio Timer Function Setup Language Select OK Set Setup Auto T uning Manual T uning Fine T uning Sort T eletext Language Auto Off Off Select Set Return OK Setup Auto T uning Manual .
32 OPERA TING INSTRUCTIONS (continued) SETUP MENU (TV mode) (continued) Selected characters Setup hint Select the country name by and SELECT buttons and press OK button. • If some requir ed stations could not be preset in this auto tuning function, select and preset the requir ed station in the required position by the manual tuning operation.
33 ENGLISH OPERA TING INSTRUCTIONS (continued) SETUP MENU (V ideo mode) Picture Audio Timer Function Setup Language Select OK Set Setup Sy s tem Sy s tem 1 Colour Sy s tem Video Input Scart O utput Mo.
34 OPERA TING INSTRUCTIONS (continued) SETUP MENU (RGB mode: RGB1 (DVI-PC), RGB2 (RGB)) MENU Picture Audio Timer Function Setup Language Select OK Set Setup Auto Adjust Adjust Hori z ontal P osition 0.
35 ENGLISH Movie PC DVI-PC DVI-STB RGB Component Auto HDTV SDTV/DVD Off On Selected characters Setup hint V er tical Filter Frequency Mode RGB1 RGB2 (1st step) RGB2 (2nd step) T urn On when concer ned about screen flicker . Set to Movie when viewing moving images on a personal computer .
36 FUNCTION MENU MENU Picture Audio Timer Function Setup Language Select OK Set Function Screen Sav er Off Screen Wipe On 6 0Min. B lack Side P anel Off Video Pow er Save Off F ree z e Mode Split Default Z oom P anoramic P anel Life Nomal Luminance Manager Off Reset Reset Select Set Return Off 5Min.
37 ENGLISH MENU Picture Audio Timer Function Setup Language Select OK Set Picture Picture Mode Dynamic Contrast +31 B rightness -31 Colour 0 Sharpness +15 Hue 0 Colour T emperature Normal Contrast Mod.
38 OPERA TING INSTRUCTIONS (continued) PICTURE MENU (TV/V ideo mode) (continued) Selected characters Picture Mode Setup hint Dynamic: This setting is best for very bright ambient lighting. Natural: This setting is for normal lighting conditions. Cinema: This setting is best for watching movie.
39 ENGLISH OPERA TING INSTRUCTIONS (continued) PICTURE MENU (TV/V ideo mode) (continued) Selected characters Colour Management Setup hint T urn On when the original balance of each colour is required to adjust depending on the user’ s preference. This adjusts listed colours individually to make them either deeper or more pur e.
40 MENU Picture Audio T imer Function Setup Language Select OK Set Picture Contrast : + 31 B rightness : – 31 Colour : 0 Hue : + 31 Picture Enhancement : Off Colour T emperature : Nor mal Colour T emp.
41 ENGLISH OPERA TING INSTRUCTIONS (continued) AUDIO MENU MENU Picture Audio Timer Function Setup Language Select OK Set Audio Audio Mode : Movie T reble : + 10 B ass : – 10 B alance : 0 L R Dynamic.
42 TIMER MENU MENU Picture Audio Timer Function Setup Language Select OK Set Timer Off T imer : 30Min. On T imer : - - : - - Select Adjust Return MENU Picture Audio Timer Function Setup Language Selec.
43 ENGLISH Picture Mode Contrast Brightness Colour Sharpness Hue Colour T emperatur e Contrast Mode YNR CNR Film Mode P AL Comb Filter LT I CTI Black Enhancement Auto Colour Colour T emp.
44 A2 / NICAM / Sound Multiplex (TV mode) • The CH I / II button is only useful for NICAM and sound multiplex signals. Otherwise pressing this button will have no ef fect. BILINGUAL / DUAL sound broadcast When bilingual program is received, sound mode display appears in yellow as shown on right.
45 ENGLISH OTHER FUNCTIONS (continued) Power Save Mode When the RGB1, RGB2 input is selected • When this unit is connected to a VESA DPMS computer , the Power Save (Off) mode can be set to be activated automatically when the computer is not being used to reduce power consumption by this unit.
46 OTHER FUNCTIONS (continued) DVD Player/STB Selection (continued) Set up hint Example) HIT ACHI DVD T o operate HIT ACHI DVD player , pr ess and hold the button, followed by the button. 1. Set up the maker . Press button to indicate the DVD LED on the remote control.
47 ENGLISH 36 TROUBLESHOOTING Symptoms That Seemingly Appear to be Failur es Make the checks suggested below depending on the symptoms observed. If the symptoms remain uncorr ected, contact your dealer . Customer servicing can be hazardous. W ARNING Symptom Point to check See page • No picture with the power -indicating lamp off.
48 TROUBLESHOOTING (continued) Symptoms That Seemingly Appear to be Failur es (continued) Symptom Point to check See page • If the direct fr equency from the computer is below 85Hz, tr y a higher frequency (upper limit 85Hz). Ther e may be a slight attenuation of the current image.
When adjustment is not possible with Auto Adjust 5) Press the MENU button. The Main Menu will be displayed. 6) Press the SELECT button and select Setup. 7) Press the OK button. The Setup Menu will be displayed. 8) Press the SELECT button and select Clock Phase.
50 P AL B, G, H / I / D, K SECAM B, G / K1 / L, L ’ / (D, K)* 2 OUTPUT (MONITOR): composite video monitor -output ter minal (RCA) OUTPUT (MONITOR): L/R audio monitor - output ter minal (RCA) OUTPUT .
Pin Input signal Pin Input signal 1 T .M.D.S. Data2- 14 +5V Power 2 T .M.D.S. Data2+ 15 Ground (for+5V) 3 T .M.D.S. Data2/4 Shield 16 Hot Plug Detect 4 T .M.D.S. Data4- 17 T .M.D.S. Data0- 5 T .M.D.S. Data4+ 18 T .M.D.S. Data0+ 6 DDC Clock 19 T .M.D.S.
52 D-sub Applicable video signals for input terminal With composite input(A V1~A V5 input) and S-video input (A V1, A V5 input) With component input (A V4 and RGB2-component input) * 1 720p/50 is supported A V4 only .
74.25 EIA-861B 8 720p/50 1280 x 720 50.00 37.50 74.25 EIA-861B 9 720p/60 1280 x 720 60.00 45.00 53 ENGLISH PRODUCT SPECIFICA TIONS (continued) Recommended Signal List (continued) With Digital signal input 1 640 X 400 70.08 31.47 25.18 쑗 2 640 X 480 59.
54 PRODUCT SPECIFICA TIONS (continued) Recommended Signal List (continued) With Analog signal input (RGB2 input) No. 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 Si.
55 ENGLISH Thank you for purchasing this Hitachi T elevision. In the unlikely event that this product should develop a fault, we undertake to repair or replace any part of the product which fails due to a manufacturing defect within 12 months of the date of purchase provided that .
Hitachi, Ltd. Tokyo, Japan International Sales Division THE HITACHI ATAGO BUILDING, No. 15 –12 Nishi Shinbashi, 2 – Chome, Minato – Ku, Tokyo 105 - 8430, Japan.
Un punto importante, dopo l’acquisto del dispositivo (o anche prima di acquisto) è quello di leggere il manuale. Dobbiamo farlo per diversi motivi semplici:
Se non hai ancora comprato il Hitachi 42PD7200 è un buon momento per familiarizzare con i dati di base del prodotto. Prime consultare le pagine iniziali del manuale d’uso, che si trova al di sopra. Dovresti trovare lì i dati tecnici più importanti del Hitachi 42PD7200 - in questo modo è possibile verificare se l’apparecchio soddisfa le tue esigenze. Esplorando le pagine segenti del manuali d’uso Hitachi 42PD7200 imparerai tutte le caratteristiche del prodotto e le informazioni sul suo funzionamento. Le informazioni sul Hitachi 42PD7200 ti aiuteranno sicuramente a prendere una decisione relativa all’acquisto.
In una situazione in cui hai già il Hitachi 42PD7200, ma non hai ancora letto il manuale d’uso, dovresti farlo per le ragioni sopra descritte. Saprai quindi se hai correttamente usato le funzioni disponibili, e se hai commesso errori che possono ridurre la durata di vita del Hitachi 42PD7200.
Tuttavia, uno dei ruoli più importanti per l’utente svolti dal manuale d’uso è quello di aiutare a risolvere i problemi con il Hitachi 42PD7200. Quasi sempre, ci troverai Troubleshooting, cioè i guasti più frequenti e malfunzionamenti del dispositivo Hitachi 42PD7200 insieme con le istruzioni su come risolverli. Anche se non si riesci a risolvere il problema, il manuale d’uso ti mostrerà il percorso di ulteriori procedimenti – il contatto con il centro servizio clienti o il servizio più vicino.
