Manuale d’uso / di manutenzione del prodotto Radeon HD 5570 del fabbricante HIS
Vai alla pagina of 32
ATI Radeon™ HD 5500 Series User Guide Part Number: 137-41760-10.
© 2009 Advanced Micro Devices Inc. All rights reserved. The contents of this document are provided in connection with Advanced Micro Devices, Inc. (“AMD”) products.
Important Safety Instructions Note: This product is for use only with compatible UL-listed personal computers that have installation instructions detailing user installation of this class of product. Read all instructions before beginning installation.
iv ATI Radeon™ HD 5500 Series © 2009 Advanced Micro Devices, Inc..
Contents Installation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 Installation Overview . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
CE Compliance Information (European Union) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23 Electrical Safety . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Chapter 1 Installation For support, you will need to record the serial number and the part number for the card before installation. Installation Overview The installation of the card has slightly different procedures depending on whether you are replacing an existing card or installing a graphics card in a PC for the first time.
Record the Serial and Part Numbers Write down the serial number and part number before installing. The serial number and 102 part number on the graphics card are required for registration and free support. They are located on a sticker on the back of the card.
Uninstalling the Old Driver (Windows Vista®/ Windows® 7) Follow these steps to uninstall the existing graphics card driver in preparation for installation of a new card. 1. With the current graphics card still in the computer, close all open applications.
5. Locate the appropriate bus slot and, if necessary, remove the corresponding metal backplate cover(s). Make sure all internal cables are clear of the slot. Note: If you cannot find a bus slot to match the card, you need a graphics card with the correct bus to match the motherboard.
If you have properly installed the graphics card, the computer should start normally. Proceed to install the software and drivers for your ATI Radeon HD 5500 Series graphics card.
6 Installation ATI Radeon™ HD 5500 Series © 2009 Advanced Micro Devices, Inc..
Chapter 2 Display Configuration This section describes how to configure the display and lists the available display connections. Configure the Display (Optional) To change the display configuration or.
6. To configure another display, do the following: a. Right-click on the desktop and, in the shortcut that appears, click Properties . Note: The ATI Catalyst Control Center software can also enable and configure multiple monitors. b. To access the basic multi-monitor configuration settings, click the Settings tab.
Display Adapters (Optional Accessories) The following table lists options for connecting displays that are indirectly supported by the connection types available on the graphics card. For best graphics performance and quality, always use native connections, if available, when connecting displays.
Table 2–1 Display Configurations Display Connections CRT analog display • VGA connection • DVI connection and DVI-I-to-VGA adapter LCD display • VGA connection and VGA cable • DVI-I connecti.
Chapter 3 ATI CrossFireX Technology Note: These features are only available for ATI Radeon HD 5500 Series graphics cards with ATI CrossFireX connections. ATI CrossFireX Introduction ATI CrossFireX is a multi-GPU (graphics processing unit) performance gaming platform.
2. Unplug the computer power cord and disconnect the monitor cable from the back panel of the computer. Caution: To avoid possible damage to the motherboard, wait approximately 20 seconds after unplugging the power cord before disconnecting a peripheral or removing a component from the motherboard.
Figure 3–1 Connecting the Power Cables 1 Power supply 2 Existing card 3 New card 8. Fasten the graphics cards securely to the back panel. 9. Make sure the cables are not interfering with anything inside the computer (for example, a cooling fan) and then replace the computer cover.
Enabling ATI CrossFireX When ATI CrossFireX support is enabled, the best possible GPU combination is selected based on the current hardware configuration. If necessary, you can change the existing ATI CrossFireX configuration using the following procedure.
Chapter 4 Reference The following section offers troubleshooting tips and provides customer care, warranty, and compliance information. System Requirements Hardware Minimum requirements are: • Motherboard with one PCIe ×16 lane graphics slot. • AMD Athlon™ or Intel® Pentium® 4 CPU.
• A 475 watt or better power supply. • For an up-to-date listing of certified power supplies, see ati.amd.com/ certifiedpsu . • Certified system cases with good airflow and cooling are recommended. For list of certified cases, see ati.amd.com/certifiedcases .
Table 4–1 ATI Catalyst Control Center Access Routes Access Route Instructions Windows Desktop 1. Right-click anywhere on the desktop. 2. From the shortcut menu that appears, click ATI CATALYST(TM) Control Center . Windows Start Menu 1. Click Start on the Windows task bar.
The computer beeps and the boot process stops. Make certain that the graphics card is properly connected to the internal power supply and the motherboard. No display on power up. This may be an SBIOS issue. Replace the old card and then try these possible solutions: 1.
Change Motherboard BIOS Settings Some motherboards may have a system BIOS option to switch between single and dual PCIe slot support. The default setting may be single slot support. Refer to the motherboard’s manual for information to enable dual PCIe slot support.
Screen Rotation is Unavailable or Does Not Work Screen rotation is not an available feature on ATI CrossFireX systems. Video Displays Flicker During System Startup This is normal during ATI CrossFireX startup.
The display appears tilted. Consult the HDTV documentation. The CRT display is green. The system is in component output mode. Restart the computer with only the CRT monitor connected.
result of the product, whether your product contains a defect, and whether your product is under warranty. • AMD Customer Care is unable to assist with refunds, returns, or exchange- specific inquiries.
• Connect the equipment to an outlet on a circuit different from that to which the receiver is connected. • Consult the dealer or an experienced radio/TV technician for help. The use of shielded cables for connection of the monitor to the graphics card is required to ensure compliance with FCC regulations.
This product complies with the PCI Express 300W Electromechanical Specification — please refer to the manufacturer for additional information. Other relevant input power data will also be available. Waste Electrical and Electronic Equipment (WEEE) Directive Compliance (European Union) This product was manufactured by Advanced Micro Devices, Inc.
KCC Certification Information (Korea) "Class B" Equipment (Household purpose info/telecommunications equipment) As this equipment has undergone EMC registration for household purpose, this product can be used in any area including residential area.
26 Reference ATI Radeon™ HD 5500 Series © 2009 Advanced Micro Devices, Inc..
Un punto importante, dopo l’acquisto del dispositivo (o anche prima di acquisto) è quello di leggere il manuale. Dobbiamo farlo per diversi motivi semplici:
Se non hai ancora comprato il HIS Radeon HD 5570 è un buon momento per familiarizzare con i dati di base del prodotto. Prime consultare le pagine iniziali del manuale d’uso, che si trova al di sopra. Dovresti trovare lì i dati tecnici più importanti del HIS Radeon HD 5570 - in questo modo è possibile verificare se l’apparecchio soddisfa le tue esigenze. Esplorando le pagine segenti del manuali d’uso HIS Radeon HD 5570 imparerai tutte le caratteristiche del prodotto e le informazioni sul suo funzionamento. Le informazioni sul HIS Radeon HD 5570 ti aiuteranno sicuramente a prendere una decisione relativa all’acquisto.
In una situazione in cui hai già il HIS Radeon HD 5570, ma non hai ancora letto il manuale d’uso, dovresti farlo per le ragioni sopra descritte. Saprai quindi se hai correttamente usato le funzioni disponibili, e se hai commesso errori che possono ridurre la durata di vita del HIS Radeon HD 5570.
Tuttavia, uno dei ruoli più importanti per l’utente svolti dal manuale d’uso è quello di aiutare a risolvere i problemi con il HIS Radeon HD 5570. Quasi sempre, ci troverai Troubleshooting, cioè i guasti più frequenti e malfunzionamenti del dispositivo HIS Radeon HD 5570 insieme con le istruzioni su come risolverli. Anche se non si riesci a risolvere il problema, il manuale d’uso ti mostrerà il percorso di ulteriori procedimenti – il contatto con il centro servizio clienti o il servizio più vicino.
