Manuale d’uso / di manutenzione del prodotto DPR 1005 del fabbricante Harman-Kardon
Vai alla pagina of 52
DPR 1005 DIGITAL PATH RECEIVER OWN ER ’ S M ANUAL Power for the Digital Revolution . ® ®.
DPR 1005 DIGITAL PATH RECEIVER 3 Introduction 4 Important Safety Information 4 Unpacking 5 F ront-Panel Controls 8 Rear -Panel Connections 11 Main Remote Control Functions 15 Zone II Remote Control Fu.
INTRODUCTION Thank Y ou for Choosing Harman Kardon ® With the purchase of a Harman Kardon DPR 1005, you are about to begin many years of listening enjoy- ment. Thanks to its completely digital path system, the DPR 1005 is truly a receiver for the new millennium.
SAFETY INFORMATION Important Safety Information V erify Line V oltage Before Use Y our DPR 1005 has been designed for use with 120-volt AC current. Connection to a line voltage other than that for which it is intended can create a safety and fire hazard and may damage the unit.
FRONT-PANEL CONTROLS 1 Standby/On Indicator 2 Standby/On Button 3 Surround Mode Group Selector 4 Surround Mode Selector 5 T uning Selector 6 T uner Band Selector 7 Preset Station Selector 8 Input Sour.
FRONT-PANEL CONTROLS 6 FRONT-PANEL CONTROLS to select a category such as Dolby or Logic 7, and then press this button to see the specific mode choices that are available .
FRONT-PANEL CONTROLS FRONT-PANEL CONTROLS 7 NOTE: To make it easier to follow the instructions that refer to this illustration, a larger copy may be downloaded from the Product Support section for this product at www .harmankardon.com. The following controls and jacks are located behind the front-panel door .
8 REAR-PANEL CONNECTIONS REAR-PANEL CONNECTIONS ¡ Video 4 Inputs ™ Video 3 Inputs £ Video 2 Outputs ¢ Video 2 Inputs ∞ Video 1 Outputs § Video 1 Inputs ¶ DVD Inputs • Multiroom Audio Output.
REAR-PANEL CONNECTIONS 9 REAR-PANEL CONNECTIONS ¡ Video 4 Inputs: Connect the left/right analog audio and composite or S-Video jacks of a video device to these jacks .
REAR-PANEL CONNECTIONS 10 REAR-PANEL CONNECTIONS d Switched AC Outlet: These outlets may be used to power any device you wish to have turned on when the DPR 1005 is turned on with the Standby/On Switch 1 . NOTE: The total power consumption of all devices connected to the rear panel AC outlets should not exceed 100 watts .
MAIN REMOTE CONTROL FUNCTIONS MAIN REMOTE CONTROL FUNCTIONS 11 MAIN REMOTE CONTROL FUNCTIONS 11 0 P ower Off Button 1 P ower On Button 2 LCD Information Display 3 Input Selectors 4 AV R Selector 5 T e.
12 MAIN REMOTE CONTROL FUNCTIONS MAIN REMOTE CONTROL FUNCTIONS IMPORT ANT NOTE: The DPR 1005’ s remote may be programmed to control up to nine devices , including the DPR 1005. Before using the remote , it is important to remember to press the Input Selector Button 3 that corresponds to the unit you wish to operate .
MAIN REMOTE CONTROL FUNCTIONS 13 MAIN REMOTE CONTROL FUNCTIONS MAIN REMOTE CONTROL FUNCTIONS 13 MAIN REMOTE CONTROL FUNCTIONS s T ransport Fast-Play/Scan Buttons: These but- tons have no direct function on the DPR 1005, but they are used when the remote is programmed for a compatible DVD , CD or tape player .
MAIN REMOTE CONTROL FUNCTIONS then select another channel to configure . When all adjustments have been completed, press the Set Button q twice to exit the settings and return to normal operation. (See page 24 for more information on speaker setup .) Memory Button: Press this button to enter a radio station to the DPR 1005’s preset memory .
ZONE II REMOTE CONTROL FUNCTIONS The Zone II remote may be used either in the same room where the DPR 1005 is located or in a separate room with an optional infrared sensor that is connected to the DPR 1005’s Multiroom IR Input jack.
INSTALLATION AND CONNECTIONS System Installation After unpacking the unit, locating it in a place with ade- quate ventilation and placing it on a solid surface capable of supporting its weight, you will need to make the con- nections to your audio and video equipment.
INSTALLATION AND CONNECTIONS 17 INSTALLATION AND CONNECTIONS the instruction shown for “Changing Devices” as shown on page 43. Y ou may also lear n the codes for the device connected to any input by following the instructions for “Learning Codes” shown on page 42.
18 INSTALLATION AND CONNECTIONS INSTALLATION AND CONNECTIONS operation by changing a setting (following the instruc- tions shown on page 39) in the MULTI-ROOM SETUP menu. NOTE: F or all options , you may connect an optional IR sensor in the remote room to the DPR 1005 via an appropriate cable .
SYSTEM CONFIGURATION 19 SYSTEM CONFIGURATION When all audio , video and system connections have been made , there are a few configuration adjustments that must be made . A few minutes spent to correctly configure and calibrate the unit will greatly add to your listening experience .
20 SYSTEM CONFIGURATION SYSTEM CONFIGURATION 3. Carefully remove the protective plastic film from the front-panel lens . If left in place , the film will prevent proper operation of the remote control. 4. Install the four supplied AAA batteries in the remote as shown.
SYSTEM CONFIGURATION 21 SYSTEM CONFIGURATION SYSTEM CONFIGURATION 21 When using the full-OSD system to make the setup adjustments , press the OSD Button once so that the MASTER MENU (Figure 1) appears . The ➔ cursor will be next to the IN/OUT SETUP line .
SYSTEM CONFIGURATION 22 SYSTEM CONFIGURATION 22 SYSTEM CONFIGURATION As a reminder , to ensure that a signal feed is always available to the record output jacks , we recommend that an analog connection be made as a fallback for all digital sources .
SYSTEM CONFIGURATION SYSTEM CONFIGURATION SYSTEM CONFIGURATION 23 SYSTEM CONFIGURATION 23 The choice of modes will vary according to the speaker configuration in your system. When the SURR BACK line of the SPEAKER SETUP menu (Figure 7) is set to NONE the DPR 1005 will be configured for 5.
SYSTEM CONFIGURATION SYSTEM CONFIGURATION 24 SYSTEM CONFIGURATION 24 SYSTEM CONFIGURATION DTS-ES Discrete). Press the ‹ / › Navigation Button o to scroll through the choices available for your system and the program in use .
SYSTEM CONFIGURATION SYSTEM CONFIGURATION SYSTEM CONFIGURATION 25 SYSTEM CONFIGURATION 25 When LARGE is selected, a full-range output will be sent to the center speaker output, and NO center channel signal will be sent to the subwoofer output.
SYSTEM CONFIGURATION SYSTEM CONFIGURATION 26 SYSTEM CONFIGURATION 26 SYSTEM CONFIGURATION Figure 8 To change the setting for any of the four speaker groups , press the ⁄ / ¤ Na vigation Button o un.
SYSTEM CONFIGURATION SYSTEM CONFIGURATION SYSTEM CONFIGURATION 27 SYSTEM CONFIGURATION 27 Navigation Button o to retur n the ➔ cursor to the FL position. With the on-screen ➔ cursor pointing to FL , press the ‹ / › Na vigation Button o until the distance from the front left speaker to the preferred listening position is entered.
SYSTEM CONFIGURATION SYSTEM CONFIGURATION 28 SYSTEM CONFIGURATION 28 SYSTEM CONFIGURATION • The channel position being adjusted will flash in the Speaker/Channel Input Indicators % . If the test noise is heard from a channel other than the one shown in the indicator , there is an error in the speaker connections .
SYSTEM CONFIGURATION 29 3. Press the Set Button q within five seconds to activate the remote’s manual mode , so that it func- tions as an SPL meter . The right corner of the bot- tom line of the remote’s display will show the output level of the speakers as the test tone circulates .
OPERATION Basic Operation Once you have completed the initial setup and configu- ration of the DPR 1005, it is simple to operate and enjoy . The following instructions will help you maximize the enjoy.
OPERATION 31 OPERATION 31 OPERATION Headphone Jack G behind the door @ on the front panel. The speakers will automatically mute and a two-channel stereo signal will be sent to the headphones .
Surround Mode Chart MODE FEA TURES Dolby Digital Available only with digital input sources encoded with Dolby Digital data. It provides up to five separate main audio channels and a special dedicated low-frequency effects channel. Dolby Digital EX Available when the receiver is configured for 6.
OPERATION OPERATION 33 OPERATION 33 Selecting a Digital Source To utilize either digital mode , you must have properly connected a digital source to the DPR 1005. Connect the digital outputs from DVD players , HDTV receivers , satellite systems or CD players to the Optical or Coaxial Inputs fl‡ HJ .
an HDCD-encoded disc is playing and the CD player is connected using a digital connection, the DPR 1005 will automatically recognize the HDCD encoding and activate the circuits required for proper playback, provided that the Surround Off mode is selected.
OPERATION OPERATION 35 OPERATION • Some source devices , particularly cable set-top boxes , will switch back and forth between digital and analog audio outputs , depending on the channel being watched.
5. Press the Set Button q to enter the change . 6. Press the OSD Button to exit the menus and return to normal operation. Once the setting is made , the Input/Output Sta tus Indicator I will turn red, indicating that the jacks are now an output, instead of in the default setting as an input.
ADVANCED FEATURES 37 ADVANCED FEATURES The DPR 1005 is equipped with a number of advanced features that add extra flexibility to the unit’s operation. While it is not necessary to use these fea- tures to operate the unit, they provide additional options that you may wish to use .
To adjust the on-screen appearance of the semi-OSD system, press the OSD Button to bring the MASTER MENU to the screen. Press the ¤ Navigation Button o , until the on-screen ➔ cursor is next to the ADVANCED line . Press the Set Button q to enter the ADVANCED SELECT menu.
MULTIROOM OPERATION MULTIROOM OPERATION 39 The DPR 1005 is fully equipped to operate as the control center for a complete multiroom system that is capable of sending one source to a second zone in the house while a separate source is listened to in the main room.
Once this setting is made , you may press the ⁄ / ¤ Navigation Button o to make any of the other adjustments available on this menu. If no other adjust- ments are needed, press the OSD Button to exit the menu system.
CONFIGURING THE REMOTE CONFIGURING THE REMOTE 41 The DPR 1005 remote is factory-programmed for all functions needed to operate the unit. In addition, it is also preprogrammed to operate most recent Harman Kardon DVD players and changers , CD players and changers , CD recorders and cassette decks .
that does not operate properly by using the learning technique shown on page 42. Automatic Code Entr y In addition to manual code selection using the brand name list, it is also possible to automatica.
CONFIGURING THE REMOTE CONFIGURING THE REMOTE 43 commands from another device’s remote into the DPR remote . Figure 29 3. The SELECT A DEVICE message will appear in the LCD display (Figure 20).
“TV , ” and show how to change it to take on the codes for operating a VCR. When that device’s name appears , press the Set Button q . Figure 38 4. Once the “old” device type has been selected, you need to tell the remote which set of remote codes to use as a replacement for the device just selected.
CONFIGURING THE REMOTE 45 CONFIGURING THE REMOTE you must first press the Input Selectors d for that button, and then press the Command or Function key . Since we want to pro gram a series of events that occur each time the Power On button is pressed, press the DPR button.
next to the bracketed readout of the underlying device (e .g ., [AVR] POWER ON ). 6. When you are finished reviewing the macro’s contents , press the Set Button q to return the remote to normal operation.
CONFIGURING THE REMOTE 47 CONFIGURING THE REMOTE Button o until the desired device name appears to the right of the device in use . In our example , that is the cable box. When the desired combination of devices appears , press the Set Button q . Figure 59 6.
3. At the next menu screen (Figure 68) press the ⁄ / ¤ Navigation Buttons o once so that E Z S ET DISABLE appears in the lower line of the LCD display . Figure 68 4. Within five seconds , press the Set Button q to disable the SPL Select Button .
CONFIGURING THE REMOTE 49 CONFIGURING THE REMOTE Renaming Individual Keys Thanks to the programming flexibility of the DPR remote , an individual button on the remote may be assigned a feature or function that is different from the name that appears as the factory default when the button is pressed.
any settings you had previously made will have to be reentered. To erase all settings and reset the remote to the original factory default settings and displays , follow these steps: 1. Press and hold the Program Button O for about three seconds while the message shown in Figure 18 appears in the remote’s LCD Information Display 2 .
TROUBLESHOOTING GUIDE 51 TROUBLESHOOTING GUIDE SYMPTOM CAUSE SOLUTION Unit does not function when Main • No AC Power • Make certain that the AC power cord is plugged into a live outlet P ower Swit.
® 250 Crossways Park Drive , Woodbury , New Y ork 11797 www .harmankardon.com © 2004 Harman International Industries , Incorporated P art No . ZKD0301HA00-9 DPR 1005 TECHNICAL SPECIFICATIONS Audio Section Stereo Mode Continuous Average P ower (FTC) 70 W atts per channel, 20Hz–20kHz, @ <0.
Un punto importante, dopo l’acquisto del dispositivo (o anche prima di acquisto) è quello di leggere il manuale. Dobbiamo farlo per diversi motivi semplici:
Se non hai ancora comprato il Harman-Kardon DPR 1005 è un buon momento per familiarizzare con i dati di base del prodotto. Prime consultare le pagine iniziali del manuale d’uso, che si trova al di sopra. Dovresti trovare lì i dati tecnici più importanti del Harman-Kardon DPR 1005 - in questo modo è possibile verificare se l’apparecchio soddisfa le tue esigenze. Esplorando le pagine segenti del manuali d’uso Harman-Kardon DPR 1005 imparerai tutte le caratteristiche del prodotto e le informazioni sul suo funzionamento. Le informazioni sul Harman-Kardon DPR 1005 ti aiuteranno sicuramente a prendere una decisione relativa all’acquisto.
In una situazione in cui hai già il Harman-Kardon DPR 1005, ma non hai ancora letto il manuale d’uso, dovresti farlo per le ragioni sopra descritte. Saprai quindi se hai correttamente usato le funzioni disponibili, e se hai commesso errori che possono ridurre la durata di vita del Harman-Kardon DPR 1005.
Tuttavia, uno dei ruoli più importanti per l’utente svolti dal manuale d’uso è quello di aiutare a risolvere i problemi con il Harman-Kardon DPR 1005. Quasi sempre, ci troverai Troubleshooting, cioè i guasti più frequenti e malfunzionamenti del dispositivo Harman-Kardon DPR 1005 insieme con le istruzioni su come risolverli. Anche se non si riesci a risolvere il problema, il manuale d’uso ti mostrerà il percorso di ulteriori procedimenti – il contatto con il centro servizio clienti o il servizio più vicino.
