Manuale d’uso / di manutenzione del prodotto HL229DPB del fabbricante Hanns.G
Vai alla pagina of 26
HSG 1212/ HSG 1213 HSG 1214/ HSG 1215 HL190/HL199 HL229/HL249.
User ’ s Manual OSD[V5.4] Before operating the monitor, please read this manual thoroughly. This manual should be retained for future reference. FCC Class B Radio Frequency Interfer ence S tatement This equipment has been tested and found to comp ly with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules.
User ’ s Manual RECYCLING INFORMATION We, the Hanns.G care very much about our environment prot ection strategy and firmly believe that it helps us have healthier earth via appropriate treatment and recycling of industrial technology devices at the end-of-life.
User ’ s Manual T A BLE OF CONTENTS SAFETY NOTICE ..................................................................................................... 5 PRECAUTIONS ...................................................................................
User ’ s Manual SAFETY NOTICE 1. The changes or m odifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipm ent. 2. Shielded in terface cables and AC pow er cord, if any , must be used in order to comply with the emission limits.
User ’ s Manual SPECIAL NOTES ON LCD MONIT ORS The following symptoms are norm al with LCD monitor and do not indicate a problem. • Due to the nature of the fluorescent light, the screen may flicker during initial use. T urn of f the Power Switch and then turn it on again to make sure the flicker disappears.
User ’ s Manual BEFORE YOU OPERA TE THE MONIT OR FEA TURES Model: HL190 HL199 HL229 HL249 Size: 47cm/ 18.5” 48,3cm/ 19” 54,6cm/ 21.5” 60cm/ 23.
User ’ s Manual INST ALLA TION INSTRUCTIONS INST ALL REMOVE Figure.1. Installing and Removing the Base INSTALLATION: 1. Turn the m onitor over and set it upside down. 2. Align the monitor to the slots on the stand. 3. Pull the screw ring upwards, then turn the screw cl ockwise to secure.
User ’ s Manual SETTING THE MONITOR ON TH E W ALL DISSEMBLING THE ST AND B ASE: 1. Disconnect all th e cables and cords fr om the Monitor to prevent breakage. 2. Carefully place the Mon itor face down on a soft and flat surf ace (blanket, foam, cloth, etc) to prevent any damage to the Monitor .
User ’ s Manual MAKING CONNECTIONS CONNECTING TO A PC T urn of f your computer before performing the procedure below . 1. Connect one end of the VGA cable to the back of the monitor and connect the other end to the computer ’ s VGA port.
User ’ s Manual ADJUSTING THE VIEWING ANGLE • For optimal viewing it is recommended to look at the full face of the monitor , then adjust the monitor ’ s angle to your own preference. • Hold the stand so you do not topple the monitor when you change the monitor ’ s angle.
User ’ s Manual OPERA TING INSTRUCTIONS GENERAL INSTRUCTIONS Press the power button to turn the monitor on or of f. The other control butt ons are located on the front panel of the monitor (See Figu re 4). By changing these settings, the picture can be adjusted to your personal preferences.
User ’ s Manual FRONT P A NEL CONTROL • Power Button: Press this button to switch ON/OFF of m onitor ’ s power . • Power Indicator: Blue —Power On mode. Flickering —Power Saving mode. • MENU / RETURN: T urn the OSD menu on/of f or return to the previous menu.
User ’ s Manual Resolution 640×400@70Hz ↔ 720×400@70Hz 640×400@85Hz ↔ 720×400@85Hz 640×480@60Hz ↔ 720×480@60Hz 1024×768@70Hz ↔ 1280×768@70Hz 1280×768@60Hz ↔ 1360×768@60Hz 1400×1.
User ’ s Manual HOW T O ADJUST A SETTINGS BRIGHTNESS/ CONTR AST BRIGHTNESS Adjust the brightness value of the display according to your preference. Select 「 BRIGHTNESS 」 option to adjust the brightness value. CONTRAST Adjust the contrast value of the display according to your preference.
User ’ s Manual display , which does not ensure the image is shown as is or in initial scale. 「 FIT 」 indicates scaling by the proportion of original images, which may cause the screen showing black bands.
User ’ s Manual the OSD. Enter the option and adjust the level. OSD TIME-OUT Select 「 OSD TIME-OUT 」 option to set the OSD time out from 10 to 100 seconds. Enter the option and adjust the level. OSD COLOR T o choose the color combination of the OSD window , select 「 OSD COLOR 」 option under 「 OSD SETTING 」 menu, choose modes 1/2/3.
User ’ s Manual PLUG AND PLA Y Plug & Play DDC2B Feature This monitor is equipped with VESA DDC2B c apa bilities according to the VESA DDC ST ANDARD. It allows the monitor to inform the host system of its identity and, depe nding on the level of DDC used, communicate additional information about its display capabilities.
User ’ s Manual TECHNICAL SUPPOR T (F AQ) Q & A FOR GENERAL PROBLEMS PROBLEM & QUESTION POSSIBLE SOLUTION Power LED is not on *Check if the Power Switch is in the ON position. *Power Cord should be connected. No Plug & Play *Check if the PC system is Plug & Play compatible.
User ’ s Manual INPUT as a PC option, and make sure PC audio output cable is connected to monitor’s LINE IN port(or AUDIO IN port) . [For HDMI Input only] Addendum related to Windows 7 When you encounter display problem under Windows 7, you need to do the following: 1.
User ’ s Manual ERROR MESSAGE & POSSIBLE SOLUTIONS CABLE NOT CONNECTED: 1. Check that the signal-cable is properly connect ed, if the conn ector is loose, tighten the connector ’ s screws. 2. Check the signal-cable’ s connection pins for damage.
User ’ s Manual 27 1440×900 @60Hz 55.469 59.901 ▲ ▲ ▲ 28 1440×900 @75Hz 70.635 74.984 ▲ ▲ ▲ 29 1400×1050 @60Hz 64.744 59.948 ▲ ▲ 30 1680×1050 @60Hz 65.
User ’ s Manual APPENDIX SPECIF ICA TIONS HL190A Driving system TFT Color LCD Size 47cm / 18.5” Diagonal LCD Panel Pixel pitch 0,3mm(H) × 0,3mm(V) H-Frequency 24KHz – 61KHz V i deo V -Frequency 56Hz – 75Hz Display Colors 16.7M Colors Max. Resolution 1366 × 768 @60Hz Plug & Play VESA DDC2B TM ON Mode 18W (T ypical)/ HL190AB 19.
User ’ s Manual SPECIF ICA TIONS HL199A Driving system TFT Color LCD Size 48,3cm / 19” Diagonal LCD Panel Pixel pitch 0,283mm(H) × 0,283mm(V) H-Frequency 24KHz – 75KHz V i deo V -Frequency 56Hz – 75Hz Display Colors 16.7M Colors Max. Resolution 1440 × 900 @75Hz Plug & Play VESA DDC2B TM ON Mode 18W (T ypical) Power Saving Mode ≤ 0.
User ’ s Manual SPECIF ICA TIONS HL229D Driving system TFT Color LCD Size 54,6cm / 21.5” Diagonal LCD Panel Pixel pitch 0,248mm(H) × 0,248mm(V) H-Frequency 30KHz – 83KHz V i deo V -Frequency 56Hz – 75Hz Display Colors 16.
User ’ s Manual SPECIF ICA TIONS HL249D Driving system TFT Color LCD Size 60cm / 23.6” Diagonal LCD Panel Pixel pitch 0,271mm(H) × 0,271mm(V) H-Frequency 30KHz – 83KHz V i deo V -Frequency 56Hz – 75Hz Display Colors 16.7M Colors Max. Resolution 1920 × 1080 @60Hz Plug & Play VESA DDC2B TM ON Mode 24W (T ypical) Power Saving Mode ≤ 0.
Un punto importante, dopo l’acquisto del dispositivo (o anche prima di acquisto) è quello di leggere il manuale. Dobbiamo farlo per diversi motivi semplici:
Se non hai ancora comprato il Hanns.G HL229DPB è un buon momento per familiarizzare con i dati di base del prodotto. Prime consultare le pagine iniziali del manuale d’uso, che si trova al di sopra. Dovresti trovare lì i dati tecnici più importanti del Hanns.G HL229DPB - in questo modo è possibile verificare se l’apparecchio soddisfa le tue esigenze. Esplorando le pagine segenti del manuali d’uso Hanns.G HL229DPB imparerai tutte le caratteristiche del prodotto e le informazioni sul suo funzionamento. Le informazioni sul Hanns.G HL229DPB ti aiuteranno sicuramente a prendere una decisione relativa all’acquisto.
In una situazione in cui hai già il Hanns.G HL229DPB, ma non hai ancora letto il manuale d’uso, dovresti farlo per le ragioni sopra descritte. Saprai quindi se hai correttamente usato le funzioni disponibili, e se hai commesso errori che possono ridurre la durata di vita del Hanns.G HL229DPB.
Tuttavia, uno dei ruoli più importanti per l’utente svolti dal manuale d’uso è quello di aiutare a risolvere i problemi con il Hanns.G HL229DPB. Quasi sempre, ci troverai Troubleshooting, cioè i guasti più frequenti e malfunzionamenti del dispositivo Hanns.G HL229DPB insieme con le istruzioni su come risolverli. Anche se non si riesci a risolvere il problema, il manuale d’uso ti mostrerà il percorso di ulteriori procedimenti – il contatto con il centro servizio clienti o il servizio più vicino.
