Manuale d’uso / di manutenzione del prodotto AD1689B del fabbricante American Dynamics
Vai alla pagina of 28
Model 1689B General Purpose 8-Channel Receiver Installation Instructions This manual describes the installation and operating procedures for the 1689B Eight-Channel Receiver. Receivers are designed as the remote control device for operation of a motorized pan & tilt unit and a motorized lens unit.
This software/firmware is confidential to and is copyrighted by SENSORMATIC ELECTRONICS CORPORATION. It is not to be copied or disclosed in any manner without the express written consent of SENSORMATIC. The software is furnished to the purchaser under a license for use on a single system.
The installation of this product should be made by qualified service personnel and should conform to all local codes. QA301D ! W W W W A A A A R R R R N N N N II I I N N N N G G G G To reduce the risk of fire or shock hazard, do not expose this product to rain or moisture.
.
T able of Contents Product Description ................................................1 Features ..................................................................1 Setup .......................................................................2 Installation .
.
PRODUCT DESCRIPTION The 1689B Receiver is used with matrix switching systems to control pan, tilt, zoom, focus, iris and auxiliary functions at a camera site. This receiver is classified as an eight-channel type since eight independent control channels are supplied.
SETUP There are eight pairs of rotary BCD switches which associate the camera identifiers with their respective channel. The locations of S1 through S16 on the PCB are shown in Figure 1 below. Rotary switches S1 and S2 are for the camera assigned to channel 1, switches S3 and S4 are for the camera assigned to channel 2, etc.
INSTALLATION This installation should be made by qualified service personnel and should conform to all local codes. Safeguards must be taken to avoid unintentional operation by employees and maintenance personnel working about the premises, by falling objects, by customers, by building vibration, and by similar causes.
CABLE CONNECTIONS Code Line Connections The Control Code line connection to the receiver is made with user-supplied, shielded 2-wire twisted pair, Belden 8760 or equivalent (for Plenum, use Belden 88760 or equivalent). The maximum code line length is 5000 feet.
Pan/Tilt and Lens Cable The connections to a Pan/Tilt and a motorized lens are with 12-pin connectors. These connectors are located on the PCB, in the front of the unit with the power switch in the upper left corner. They are labeled J101 to J801 and OUT 1 to OUT 8, respectively (see Figure 1 or OP0064, OP0065 or OP0066).
Auxiliary Cable If the unit is configured with auxiliaries, they are connected by 12-pin connectors. For four auxiliaries these connectors, labeled J201, J401, J601 and J801 (OUT 2, OUT 4, OUT 6 and OUT 8) respectively, are located in the front of the PCB (see OP0065 or OP0066 for four and eight auxiliaries, respectively).
Power Input CAUTION - The following instructions for power input require the installer to gain access to internal terminals and power wiring which involve hazardous voltages and the risk of electric shock. Power wiring must be done only by qualified electricians or service personnel and should conform to local codes.
.
Appendix.
.
.
.
.
.
.
.
.
.
.
.
.
An American Dynamics Product Designed and built by Sensormatic Video Systems Division One Blue Hill Plaza Pearl River, New York, 10965 Business: (845) 624-7600 Technical Support Center: 1-800-442-2225.
Un punto importante, dopo l’acquisto del dispositivo (o anche prima di acquisto) è quello di leggere il manuale. Dobbiamo farlo per diversi motivi semplici:
Se non hai ancora comprato il American Dynamics AD1689B è un buon momento per familiarizzare con i dati di base del prodotto. Prime consultare le pagine iniziali del manuale d’uso, che si trova al di sopra. Dovresti trovare lì i dati tecnici più importanti del American Dynamics AD1689B - in questo modo è possibile verificare se l’apparecchio soddisfa le tue esigenze. Esplorando le pagine segenti del manuali d’uso American Dynamics AD1689B imparerai tutte le caratteristiche del prodotto e le informazioni sul suo funzionamento. Le informazioni sul American Dynamics AD1689B ti aiuteranno sicuramente a prendere una decisione relativa all’acquisto.
In una situazione in cui hai già il American Dynamics AD1689B, ma non hai ancora letto il manuale d’uso, dovresti farlo per le ragioni sopra descritte. Saprai quindi se hai correttamente usato le funzioni disponibili, e se hai commesso errori che possono ridurre la durata di vita del American Dynamics AD1689B.
Tuttavia, uno dei ruoli più importanti per l’utente svolti dal manuale d’uso è quello di aiutare a risolvere i problemi con il American Dynamics AD1689B. Quasi sempre, ci troverai Troubleshooting, cioè i guasti più frequenti e malfunzionamenti del dispositivo American Dynamics AD1689B insieme con le istruzioni su come risolverli. Anche se non si riesci a risolvere il problema, il manuale d’uso ti mostrerà il percorso di ulteriori procedimenti – il contatto con il centro servizio clienti o il servizio più vicino.
