Manuale d’uso / di manutenzione del prodotto FS-4500 del fabbricante Fortec
Vai alla pagina of 33
.
GENERAL INFORMA TION INSTALLATION MENU INFORMA TION 3 7 9 Main Features For your Safety Unpacking General Operation RCU 3 4 5 5 6 Front Panel Rear Panel Connecting to TV& VCR using SCART support Connecting to TV using RCA support Connecting to Digital Amplifier 7 7 7 8 8 Main Menu 1.
4. T ools 4.1 Information 4.2 Factory Setting 4.3 Upgrade by USB 4.4 Conditional Access 4.5 USB 5. REC 5.1 Record Mangager 5.2 PVR Setting 5.3 HDD Information 6. Hot key 6.1 Info 6.2 EPG 6.3 Find 6.4 Number 6.5 TV/Radio 6.6 Up/Down 6.7 Left/Right 6.8 Mute 6.
.
A Digital Satellite Receiver is a convenient product that allows you to view a variety of programs provided through satellite. This user's guide covers the installation of the DSR and the necessary steps to implement various features.
WARNING For Y our Safety Be sure to turn the Receiver off and disconnect the AC power cord before cleaning the Receiver surface. If the surface is dirty, wipe clean with a cloth which has been dipped in a weak soap-and- water solution and wrung out thoroughly, and then wipe again with a dry cloth.
General Operation Throughout this manual you will notice that the everyday operation of the receiver is based on a series of user friendly on screen display and menus. These menus will help you get the most from your receiver, guiding you through installation, channel organizing, viewing and many other functions.
RCU Key Function Turns power ON/OFF of the DSR When watching a channel, mute the sound Switches between TV and Radio mode 0~9 MENU EXIT OK, LIST PR+, PR- Enter number of the required menu item or sele.
Rear Panel Rear Panel Connecting to TV using SCART support Rear Panel Front Panel DSR Satellite Dish LNB IN: CONNECT TO SA TELLITE ANTENNA LNB OUT :CONNECT TO THE OTHER RECEIVER CONNECT TO A DIGITAL A.
Connecting to TV using RCA support Connecting to Digital Amplifier Satellite Dish Satellite Dish DIGITAL AUDIO CONVERTOR OR AMPLIFIER SPEAKER DIGITAL AUDIO L R L R IN VIDEO TV AUDIO Serial Number Seri.
Main Menu This menu consists of 5 major main menus as follow. - Edit Channel - Installation - System Setup - T ools - REC During the installation the OK key confirms a selection and LIST key shows Down List Box if the column has 34 mark. Y ou can also use the numeric keys on the RCU to enter numeric value.
If there is no program, you can not exit from the Main Menu window by pressing MENU or EXIT key. System will inform "No channel" and the following items turn grey . 1. Press OK key or key to pop up the "Input Password" dialogue, you can not enter into the menu unless the correct password is inputted.
3. Press FAV key to move the FA V button upward. Select the program and press OK key to pop up the favourite group list. In the list, select the group that you want to add into and press OK key, and then you will find the favourite mark is displayed at the right side of the selected program.
7. Press blue colour key to enter into the Edit channel window. Press red colour key to pop up the Sort drop- down list. Name(A-Z): The ascending order , omitting the $ character, the number is ahead, then the capital letter, at last the lowercase. Name (Z-A): The opposite order of the above Name (A-Z).
In Delete window, press blue colour key to move the Delete button upward. Select the program and press OK key to mark this program with the deletion mark. You can cancel this mark by pressing OK key again. Press EXIT key to pop up the dialogue "Are you sure to save?".
2. Installation 1. Press OK key or key to pop up the "Input Password" dialogue, you can not enter into the menu unless the correct password is inputted. The default password is "0000". 2. Press PR+, PR- keys to move the cursor up or down.
4. Press green colour key to pop up the Add Satellite window. Since the same operation as the above Edit Satellite window, here we don't explain any more. 5. Press blue colour key to pop up the dialogue "Are you sure to delete?". Select Yes button and press OK key to delete the selected satellite.
4. Motor Setting: Press OK key to the Motor Setting window. Satellite: Press keys to select the satellite in circle. Or press OK key to pop up the drop- down list, then select the desired satellite in the list and press OK key to confirm. Transponder: The same operation as the above.
6. If select USALS, Delete All item will turn grey. Local Longitude, Local Latitude: Press keys to switch between West and East, or press keys to switch between North and South. Press OK key to enter into the editing mode. Use numeric keys (0-9) to input the longitude or latitude, press MENU key or EXIT key to exit.
2.5 Multi Satellite Search From the Multi Satellite Search window, you can search several satellites at the one time. 1. Satellite : All selected satellites in the satellite list window are displayed on the down part. You can press keys to switch among them.
4. Press yellow colour key to pop up dialogue " Are you sure to delete?". Press OK key at the Yes button to delete the selected TP , or press EXIT key to cancel the operation. 5. Press blue colour key to pop up the TP Search window. FTA only, Scan Channel, Network Search: Press keys to select the proper option.
Press PR+, PR- key to move the cursor up or down, while press keys to change the setting and the setting will take effect immediately. 1. Display Mode: Select among Auto,PAL, PAL-M, PAL-N, SECAM and NTSC. 2. Aspect Mode: Select among 4:3LetterBox, 4:3PanScan, 16:9.
2.Timer Service: Select between Channel and Record. If Channel is selected, the Wakeup Channel is displayed in the following item. If Record is selected, the Wakeup Record is displayed in the following item. 3. Wakeup Date, On T ime: Use numeric keys to input the valid date.
There are 32 favorites group listed in this window. Press PR+, PR- keys to select one and press OK key to the Rename window. Since the same operation as the above the Add Satellite window, here we don't explain any more. 3.7 Favorite 3.6 OSD Setting 1.
4.2 Factory Setting Press OK key to enter into the Factory Setting window. Select Yes button and press OK key to return to the factory setting. All searched channels and set information will be erased. Select No button and press OK key to cancel this operation, or press MENU or EXIT key to cancel and exit.
4.4.1 About CA Info In About CA Info sub-menu, you can know the basic information about this conditional access such as Card Status, CAS System ID, Interface Version, Card Number, Number of sessions, Country Indicator, and Maturity Level.
4.5 USB 25 USB menu will be automatically shown when insert U disk to USB port except auto scan, multi picture, upgrade. Or open USB menu according to Menu -> T ools-> USB. Press OK to enter into this window. USB menu will be disabled when no USB device is plugged.
5. REC 5.1. Record Manager 1. Press PR+, PR- keys to select up or down, 2. Press green color key to lock the channel you selected, the lock symbol will be marked behind the channel. Before you lock the channel you must input the correct password, the default password is 0000.
27 1.Timeshift: If you set timeshift "On", it will record the current channel you watch automatically. Then you can press [Pause] / [Fast Backward] / [Slow Backward] key to watch the previous program. If timeshift is "Off", timeshift function doesn't work.
28 : Press OK key at this button to move the cursor to the current time line. : Press OK key to push the time forward or backward by half an hour . : Press OK key to push the time forward or backward by half an hour. : Press OK key to push the time forward or backward by a day .
29 During the viewing, you can press PAUSE key to stop the picture while the volume continues. Y ou can play the picture by pressing PAUSE key once again. 6.9 Pause 1. During the viewing or listening, press OK key to pop up the TV program list or the Radio program list.
30 1. Press FAV key to pop up the favourite group window. 2. Press keys to select the favorite group. Press PR+, PR- keys to select the channel up or down.. Press OK key at the selected channel to view it in full-screen. Press MENU or EXIT key to exit.
31 Problem Possible causes What to do The display on the front panel does not light up. No sound or picture, but the front panel shows red light. Main cable is not connected. The is in standby mode. receiver Check that the main cable is plugged into the power socket.
Un punto importante, dopo l’acquisto del dispositivo (o anche prima di acquisto) è quello di leggere il manuale. Dobbiamo farlo per diversi motivi semplici:
Se non hai ancora comprato il Fortec FS-4500 è un buon momento per familiarizzare con i dati di base del prodotto. Prime consultare le pagine iniziali del manuale d’uso, che si trova al di sopra. Dovresti trovare lì i dati tecnici più importanti del Fortec FS-4500 - in questo modo è possibile verificare se l’apparecchio soddisfa le tue esigenze. Esplorando le pagine segenti del manuali d’uso Fortec FS-4500 imparerai tutte le caratteristiche del prodotto e le informazioni sul suo funzionamento. Le informazioni sul Fortec FS-4500 ti aiuteranno sicuramente a prendere una decisione relativa all’acquisto.
In una situazione in cui hai già il Fortec FS-4500, ma non hai ancora letto il manuale d’uso, dovresti farlo per le ragioni sopra descritte. Saprai quindi se hai correttamente usato le funzioni disponibili, e se hai commesso errori che possono ridurre la durata di vita del Fortec FS-4500.
Tuttavia, uno dei ruoli più importanti per l’utente svolti dal manuale d’uso è quello di aiutare a risolvere i problemi con il Fortec FS-4500. Quasi sempre, ci troverai Troubleshooting, cioè i guasti più frequenti e malfunzionamenti del dispositivo Fortec FS-4500 insieme con le istruzioni su come risolverli. Anche se non si riesci a risolvere il problema, il manuale d’uso ti mostrerà il percorso di ulteriori procedimenti – il contatto con il centro servizio clienti o il servizio più vicino.
