Manuale d’uso / di manutenzione del prodotto ALL0285 del fabbricante Allnet
Vai alla pagina of 34
ALL0285 IEEE 802.11b/g Wireless Access Point User’s Guide.
Contents Contents .......................................................................................................................... 2 System Requirements For Configuration ......................................................................
Package Contents • IEEE 802.11g 2.4GHz Wireless LAN Access Point • Power Adapter – 5VDC, 2A • Quick Installation Guide on CD Note: Using a power supply with a different voltage rating than the one included with the 802.11g Wireless Access Point will cause damage and void the warranty for this product.
Introduction The 802.11g Wireless Access Point provides the most expanded user bandwidth available in an AP. Network members can connect to this AP using any of its channels to transfer data at speeds never achievable before in a wireless device. The 802.
Connections • Straight-Through cable is required when connecting to a router or switch • Cross-Over cable is required when connecting directly to an Ethernet adapter on a computer for configuratio.
LEDs LED stands f or L ight- E mitting D iode. The 802.11g Wireless Access Point has 3 Green LEDs as shown below: LED LED Activity Power A steady light indicates a connection to a power source LAN (10/100) A steady light indicates a connection to the Ethernet port; a blinking light indicates activity WLAN (802.
Wireless Basics The 802.11g Wireless Access Point is based on in dustry standards to provide easy-to use and compatible high-speed wireless connectivity w ithin your home, business or public access wireless networks. Strictly adhering to the IEEE sta ndard, the 802.
The 802.11g Wireless Access Point is compatible with the IEEE802.11g wireless products: 802.11g Wireless Cardbus Adapters used with laptop computers and 802.11g Wireless PCI cards used with desktop computers Standards-Based Technology The 802.11g Wireless Access Point utilizes the 802.
Installation Considerations Desktop and laptop computers with wireless netw ork adapters installed can access the 802.11g Wireless Access Point from virtually anywhere with in its operating range.
Getting Started A . First, connect the power adapter to the receptor at the back panel of the 802.11g Wireless Access Point and then plug the other end of the power adapter to a wall outlet or power strip. The Power LED will turn ON to indicate proper operation.
For a typical wireless setup (as shown above), please do the following: 1. You will need a broadband Intern et access (Cable/DSL) subscription 2. Consult with your Cable/DSL provide r for proper installation of the modem 3. Connect the modem to an Ethernet broadband router.
Using the Web Configuration Utility The easiest and quickest way to connect to a wireless network using your 802.11g Wireless Access Point is to use the Conf iguration Utility. Open your w eb-browser and type in the IP Address of the 802.11g Wireless Ac cess Point.
Once entered, the Current Status screen will appear. There are three other options available in this screen: Setup Wizard , Advanced Setup , and Statistics .
Setup Wizard Using the built-in Setup Wizard is the easiest and quickest way to connect to a wireless network. To take advantage of this convenient technology, si mply click Setup Wizard at the top of the Current Status screen. The following screen will appear.
This screen displays the present level of security on your Access Point. To use encryption, click Enabled , choose the Key Size , and enter the encryption Key Value .
Advanced Setup Configuration To change the configuration of your Access Point, click on Advanced Setup at the top of the Current Settings screen. The following screen will appear. This screen displays the default settings of the 802.11g Wireless Access Point and allows you to change settings and values.
Device Information This screen allows you to modify for the AP Syst em Name and System Contact information. Just type in your new inform ation in the whiteout fields, and click on Apply to save the information.
WLAN Parameter Settings SSID: ( Service Set Identifier): default is the default setting. The SSID is a unique name that identifies a network. All devices on a network must share the same SSID name to communicate on the network. If you choose to change the SSID from the default setting, input a new SSID name in this field.
Transmit Power: Adjust the transmission power here. This tool can be helpful for security purposes if you wish to limit the transmission range. Click on Apply to have the Access Point save the new options once you have com pleted the modification.
Access Control Settings Control: Disabled - Disable the Access Control feature Accept - Accept the MAC Addresses in the list into the network Reject - Reject the MAC Addresses in the list from participating in the network Input MAC Address: Input the MAC Addresses into the list.
Security Settings Wireless Band: IEEE 802.11g will be the only choice here. Authentication: Select from one of the following: Open System: the 802.11g Wireless Access Point will be visible to all devices on the network. Open System is the default setting.
Administration User Name: The default User Name is ad min. Old Password: To change your password, first enter the old password. New Password: Enter the new password. Confirm New Password: Re-enter the new password. To save changes, click Save. Misc Telnet Service: When enabled, Administrator can access the device configuration via Telnet operation.
Maintenance/Update Firmware Update File: Click on Browse to find the new firmware file from your hard driv e. After you find the updated firmware f ile located on your hard drive, click OK to start the firmware update process. Configuration File Update File: Click on Browse to find the new configuration file from your hard drive.
Restart System Apply Settings and Restart: If you have made any changes to the configuration settings, click Restart to apply the changes. Statistics Throughput Displays the WLAN 11g throughput statistics for received, transmitted and RTS communications.
Transmitted Displays the 11g WLAN Tx Fragment Count, Multicast Tx Frame Count, Tx Error Count, Total Tx Retry Count, Tx Multiple Retry Count. Received Displays the 11g WLAN Rx Fragment Count, Multicast Rx Frame Count, Rx Frame FCS Error Count, Rx Frame Duplicate Count and Ack Rx Failure Count.
WEP Frame Error This statistics page displays the counting for: WEP excluded Frames Count and WEP ICV Error Count. 26.
Troubleshooting This chapter provides solutions to problem s that can occur during the installation and operation of the 802.11g Wireless Access Point. We cover various aspects of the network setup, including the network adapters. Please read the following if you are having proble ms.
Make sure the computer is associated and joined with the correct Access Point. To check this connection: Right-click on the Local Area Connection icon in the taskbar> select View Available Wireless Networks . The Connect to Wireless Network screen will appear.
3. Check that the drivers for the networ k adapters are installed properly. You may be using different network adapters than t hose illustrated here, but this procedure will remain the same, regardless of the type of network adapters you are using. • Go to Start • Right-click on My Computer • Click Properties • Select the Hardware tab .
• Double-click on Network Adapters • Right-click on IEEE 802.11g Wireless Cardbus Network Adapter • Select Properties to check that the drivers are installed properly • Look under Device Statu.
4. What variables may cause my wirele ss products to lose reception? se refer to urther formation about the most advantageous placement of your wireless products. . Why does my w • ms, lectrical devices that generate RF noise, n? ireless Access Point, you must also enable en cryp tion on all other members of the network.
Technical Specifications Standards IEEE 802.11g IEEE 802.11b IEEE 802.3 IEEE 802.3u Device Management Web-Based - Internet Explorer v6 or later; Netscape Navigator v6 or later; or .
Safety and Emissions: CE Physical Dimensions: L = 140mm W = 110mm H = 25mm Wireless Data Rates with Automatic Fallback: 54 Mbps 48Mbps 36Mb ps 24Mbps 18Mbps 12Mbps 11Mbps 9Mbps 6Mbps 5.
Weight: 190g Receiver Sensitivity: 54Mbps OFDM, 10% PER,-73dBm 48Mbps OFDM, 10% PER,-76dBm 36Mbps OFDM, 10% PER,-82dBm 24Mbps OFDM, 10% PER,-85dBm 18Mbps OFDM, 10% PER,-88dBm .
Un punto importante, dopo l’acquisto del dispositivo (o anche prima di acquisto) è quello di leggere il manuale. Dobbiamo farlo per diversi motivi semplici:
Se non hai ancora comprato il Allnet ALL0285 è un buon momento per familiarizzare con i dati di base del prodotto. Prime consultare le pagine iniziali del manuale d’uso, che si trova al di sopra. Dovresti trovare lì i dati tecnici più importanti del Allnet ALL0285 - in questo modo è possibile verificare se l’apparecchio soddisfa le tue esigenze. Esplorando le pagine segenti del manuali d’uso Allnet ALL0285 imparerai tutte le caratteristiche del prodotto e le informazioni sul suo funzionamento. Le informazioni sul Allnet ALL0285 ti aiuteranno sicuramente a prendere una decisione relativa all’acquisto.
In una situazione in cui hai già il Allnet ALL0285, ma non hai ancora letto il manuale d’uso, dovresti farlo per le ragioni sopra descritte. Saprai quindi se hai correttamente usato le funzioni disponibili, e se hai commesso errori che possono ridurre la durata di vita del Allnet ALL0285.
Tuttavia, uno dei ruoli più importanti per l’utente svolti dal manuale d’uso è quello di aiutare a risolvere i problemi con il Allnet ALL0285. Quasi sempre, ci troverai Troubleshooting, cioè i guasti più frequenti e malfunzionamenti del dispositivo Allnet ALL0285 insieme con le istruzioni su come risolverli. Anche se non si riesci a risolvere il problema, il manuale d’uso ti mostrerà il percorso di ulteriori procedimenti – il contatto con il centro servizio clienti o il servizio più vicino.
