Manuale d’uso / di manutenzione del prodotto ED335 del fabbricante EverFocus
Vai alla pagina of 18
1/3” CCD Indoo r 3-Axis Dual V oltage T rue Day/Night IR Dome Came ra Operation Instructions Model No. ED335 Please read this manual first for correct installation and operation. This manual should be re t ained for fu tur e reference. The information in this manual wa s current when published.
1 PRODUCT OVER VIEW ED335 is a new design IR Dome camera from Everfo c us. It incorporates breakthrough DSP technolog y to provide brilliant color images in well lit environmen ts.
2 Power supply pigtail Video test cable Accessory pack #2 containing t wo flush mounting clips DIMENSIONS.
3 SPECIFICA TIONS Pickup Device 1/3” SONY Super HAD CCD Video Format NTSC or P AL Scanning System NTSC: 525 TV lines, 60 fields/sec; P AL: 625 TV lines, 50 fields/sec. Picture Element 768 x 494 (NTSC); 752 x 582 (P AL) Horizontal Resolution 520 TV Lines Sensitivity 0 Lux (IR LED on) 0.
4 MAJOR P AR TS: NAMES AND FUNCTIONS Front View Side View 2. IR LEDs 4. Light sensor 1. Outer Base 6. Focus Adjust 8. Video Output 9. Power Input 3. Lens 5.
5 Back V iew 1. Base The camera unit sets in the dome base, when it is s hipp ed from the factory . This base is used for surface mounting, and is discarded fo r fl ush mounting. 2. IR LEDs 3. Lens The included vari-focal, DC iris lens allows manual adjustment of the field of view (zoom & focus).
6 7. Zoom Ring T o adjust the viewing angle, loosen t he zoom ri ng knob. T urn the ring toward <W> to Zoom out or <T> to Zoom in as necessary , and re-tighten when the a djustment is complete. 8. Video Output Please connect to the BNC connecto r of the cable from the DVR or monitor .
7 3-AXIS GIMBAL BRAC KET The 3-axis gimbal enables installers to easily moun t the camera on a wall or ceiling and then using the built in tilt and dual axis 180° twist, to adjust the viewing a n gle to the desired direction.
8 INST A LLA T I ON An ED335 camera may be mount ed in two ways: surface mount and flush mount. Select the one that meets your needs. Installation - Surface Mount 1. Paste the drilling template on the ceiling or wall. P le ase refer to the drilling template belo w .
9 4. Remove dome cover (4 captive hex head screws); re m ove inner base from outer base (4 Phillips head screws – retain these for later re-assembly). 5. Pull the cables to be connected to power and video ca bles into the outer base from the ceiling or wa ll.
10 7. Attach power and video cables from source to c ables from camera and push exce s s wire back into hole. 8. Insert inner base into outer base and se c ure using the 4 Phillips removed in the earlier step . Preposition camera so it is facing approximately in the desired direction.
11 10. Once the camera view is as desired, attach the cover to oute r base with the captive hex head screws..
12 Installation - Flush Mount 1. Paste the drilling template on the ceiling or wall. P le ase refer to the drilling template belo w . 2. Use the appropriate tool to drill the OUTER holes; carefully cut a lo ng the dashed circle to create a clearance hole for the inner base unit.
13 5. Unscrew the 4 Philips screws (retain f or future use) to detach the inner base from the o uter base. Set aside the outer base. 6. Screw the 2 spring tabs in the orientation shown t o the slots at both sides of the inner base using the 4 Philips head screws provided.
14 7. Atta c h power and video cables from source to cab les from camera and push excess wire ba ck i nto hole. Fold the spring tabs up. 8. Preposition camera so it is facing approximate ly in the desired direction. 9. Push the entire inner base into ceiling while holding the spring tabs with both hands.
15 10. The spring tabs will open automatically to support the camera against the ceiling. 1 1. Use the long Phillips pan head screws (x4) provided to screw the base to the ceiling.
16 12. Attach video test cable to test point on rear of camera modu le . Aim and focus the ca mera. Remove test cable. 13. Screw the cover back to the base with capt ive hex head screws.
17 Headquarters Of fice 12F, No.79 Sec. 1 Shin-Tai W u Road, Hsi-Chi, Taipei , Taiwan Tel: +886-2-26 982334 Fax: +886-2-2 6982380 Beijing office Room 609,T echnology Trade Bui lding.
Un punto importante, dopo l’acquisto del dispositivo (o anche prima di acquisto) è quello di leggere il manuale. Dobbiamo farlo per diversi motivi semplici:
Se non hai ancora comprato il EverFocus ED335 è un buon momento per familiarizzare con i dati di base del prodotto. Prime consultare le pagine iniziali del manuale d’uso, che si trova al di sopra. Dovresti trovare lì i dati tecnici più importanti del EverFocus ED335 - in questo modo è possibile verificare se l’apparecchio soddisfa le tue esigenze. Esplorando le pagine segenti del manuali d’uso EverFocus ED335 imparerai tutte le caratteristiche del prodotto e le informazioni sul suo funzionamento. Le informazioni sul EverFocus ED335 ti aiuteranno sicuramente a prendere una decisione relativa all’acquisto.
In una situazione in cui hai già il EverFocus ED335, ma non hai ancora letto il manuale d’uso, dovresti farlo per le ragioni sopra descritte. Saprai quindi se hai correttamente usato le funzioni disponibili, e se hai commesso errori che possono ridurre la durata di vita del EverFocus ED335.
Tuttavia, uno dei ruoli più importanti per l’utente svolti dal manuale d’uso è quello di aiutare a risolvere i problemi con il EverFocus ED335. Quasi sempre, ci troverai Troubleshooting, cioè i guasti più frequenti e malfunzionamenti del dispositivo EverFocus ED335 insieme con le istruzioni su come risolverli. Anche se non si riesci a risolvere il problema, il manuale d’uso ti mostrerà il percorso di ulteriori procedimenti – il contatto con il centro servizio clienti o il servizio più vicino.
