Manuale d’uso / di manutenzione del prodotto 350103 del fabbricante Aleratec
Vai alla pagina of 58
® USER GUIDE Aleratec 1:1 HDD Cruiser™ Part No. 350103.
www .aleratec.com Copyright/Model Identification The content of this manual is for informational purposes only and is subject to change without notice.
www .aleratec.com Radio/TV Interference Statement The equipment described in this guide emits radio frequency energy . If it is not installed in accordance with the manufacturer ’ s instructions, it may cause interference with radio or television reception.
www .aleratec.com Safety Regulations W ARNING T o prevent re or shock hazard, do not expose the unit to rain or moisture. T o avoid electrical shock, do not open the cabinet.
www .aleratec.com T able of Contents Introduction ................................................................................................... 1 Product Features ..................................................................................
www .aleratec.com ®.
www .aleratec.com 1 Introduction Thank you for purchasing the 1:1 HDD Cruiser . Please read this User Guide thoroughly before using this product. Product Features The 1:1 HDD Cruiser is a Hard Disk Drive Duplicator and Hard Disk Drive Sanitizer .
www .aleratec.com 2 Introduction Key Items Display Panel (see page 4) Power Switch Controller Drive Bays (2) Source Drive T arget Drive.
www .aleratec.com 3 1 2 3 Introduction 1:1 HDD Cruiser Front Panel 1 Drive Bays Drive bays with quick loading doors. 2 Drive Bay Door The drive bay handle/tab is used to open the individual drive bays. 3 Drive LEDs Each HDD bay has a blue power light that will be on when there is an HDD properly inserted in the drive bay .
www .aleratec.com 4 Introduction 1:1 HDD Cruiser Copy Controller Display Panel and Buttons (Actual display may vary from illustration) 1. LCD display shows all functions and messages 2. ENT button is used to execute a selected function, or enter a menu 3.
www .aleratec.com 5 Precautions Before installing your 1:1 HDD Cruiser , please read the following. Installation A void placing the 1:1 HDD Cruiser in a location subject to: • High humidity • High temperature • Excessive dust • Mechanical vibration • Direct sunlight • Electromagnetic radiation Choose a Good Location 1.
www .aleratec.com 6 Overview Power Up Sequence During the normal power-up sequence of the 1:1 HDD Cruiser , the following information will be displayed. • Figure 1 shows the rmware version • Figure 2 shows the memory initialization • Figure 3 shows the scanning of the drives • Figure 4 shows the number of drives loaded.
www .aleratec.com 7 Overview Main Menu There are ten main menu items that can be seen in the 1:1 HDD Cruiser Copy Controller Display Panel. These are: 1. 2. 3. 4. 5. Note: The Advanced Setup function is a hidden menu. T o access this menu, press ESC for 3 seconds.
www .aleratec.com 8 Overview Subfunctions The “Setup” menu has nine (9) subfunctions. These are: 8-03 Startup Menu 8-04 Auto Compare 8-05 Copy with Size 8-06 Button Sound 8-07 Device Info 8-08 System Info 8-09 Fast Copy ENT ESC 8.
www .aleratec.com 9 Overview The “Advanced Setup” menu has ten (10) subfunctions. These are: 10-01 Detect HDD Delay 10-02 Read Error Skip 10-03 Update Firmware 10-04 Compare Firmware 10-05 Quick Erase HDD 10-06 H/W Diagnostic 10-07 Load Default 10-08 Link Option 10-09 USB Auto Link 10-10 Copy HP A ENT ESC 10.
www .aleratec.com 10 Using the 1:1 HDD Cruiser Loading the Hard Drives 1. Open the drive tray doors by lifting the tab on the left side of each drive bay you wish to use. 2. T ake the Hard Disc Drive (HDD) and align the drive’ s SA T A plug to the lower right hand side of the drive bay .
www .aleratec.com 1 1 Using the 1:1 HDD Cruiser Removing Hard Drives 1. Open the drive tray doors by pulling the handle/tab on the left side of each drive tray door . Note: Do not attempt to remove the hard drive if the drive activity LED is on. 2. T o disengage the HDD, swing the drive tray door to the full open position.
www .aleratec.com 12 Using the 1:1 HDD Cruiser Main Menu Copy HDD The “Copy HDD” function performs an actual copy from a source HDD to one or more target HDDs. The target HDDs must be at least as large as the source. The 1:1 HDD Cruiser will copy every block of capacity on the source HDD.
www .aleratec.com 13 Using the 1:1 HDD Cruiser 4. Once duplication is complete, a job status screen will be displayed. ENT ESC 1. Copy HDD OK:1 Fail: 0.
www .aleratec.com 14 Using the 1:1 HDD Cruiser Main Menu Compare HDD The “Compare HDD” function performs a comparison of data from the source hard drive to the data on the target hard drives. 1. With the source and tar get HDDs loaded use the arrow buttons ( or ) to select “Compare HDD”.
www .aleratec.com 15 Using the 1:1 HDD Cruiser Main Menu PreScan Source The “PreScan Source” scans the source hard drive to determine if it can be read correctly . 1. With the source HDD loaded, use the arrow buttons ( or ) to select “PreScan Source”.
www .aleratec.com 16 Using the 1:1 HDD Cruiser Main Menu ReScan Bus The “ReScan Bus” function causes the 1:1 HDD Cruiser to redetect connected hard drives. This can be used when you change drives without restarting the system. 1. Use the arrow buttons ( or ) to select “ReScan BUS”.
www .aleratec.com 17 Using the 1:1 HDD Cruiser Main Menu Source HDD Size The “Source size” function is used to display the capacity of the source hard drive. 1. With the source HDD loaded, use the arrow buttons ( or ) to select “Source size”.
www .aleratec.com 18 Using the 1:1 HDD Cruiser Main Menu Secure Erase The “Secure Erase” function will sanitize (wipe clean of all data) the hard disk drives connected to the 1:1 HDD Copy Cruiser using algorithms programmed by the hard drive manufacturer .
www .aleratec.com 19 ENT ESC 1 HDD CH:0 Wipe successful 5. Y ou can now scroll up and down for the individual status of each drive..
www .aleratec.com 20 Using the 1:1 HDD Cruiser Main Menu Overwrite The “Overwrite” function will sanitize (wipe clean of all data) the hard disk drives connected to the 1:1 HDD Copy Cruiser . 1. Load the source HDD and the target HDDs into the 1:1 HDD Cruiser .
www .aleratec.com 21 Using the 1:1 HDD Cruiser b. T o perform a “Three Pass Overwrite”, scroll to “3 Pass” and press ENT . This method will write one pass of 1’ s, one pass of zeros, and one pass of randomly generated data. The next screen allows you to choose whether you wish to verify the random overwrite.
www .aleratec.com 22 Using the 1:1 HDD Cruiser Main Menu Setup The “Setup” menu contains conguration options for the 1:1 HDD Copy Cruiser . It is suggested to use the factory defaults for optimum performance. 1. Use the arrow buttons ( or ) to select “Setup”.
www .aleratec.com 23 Using the 1:1 HDD Cruiser Setup Menu 8-01 Language This option allows you to select the language that is used for the display . 1. Use the arrow buttons ( or ) select “Setup”. The following screen will be displayed. 2.
www .aleratec.com 24 Using the 1:1 HDD Cruiser Setup Menu 8-02 Copy Size This function is used to specify the amount of source disk data to copy to the target drives. 1. Use the arrow buttons ( or ) select “Setup”, then press ENT . The following screen will be displayed.
www .aleratec.com 25 Using the 1:1 HDD Cruiser Setup Menu 8-03 Startup Menu This option lets you select any of the functions (except “Setup”) as the initial function that appears when the 1:1 HDD Cruiser is powered on. 1. Use the arrow buttons ( or ) select “Setup”.
www .aleratec.com 26 Using the 1:1 HDD Cruiser Setup Menu 8-04 Auto Compare This option allows you to choose whether or not to automatically compare the source and target hard drives after every copy operation. 1. Use the arrow buttons ( or ) select “Setup”.
www .aleratec.com 27 Using the 1:1 HDD Cruiser Setup Menu 8-05 Copy with Size This option allows you to choose whether or not to automatically rescan for connected drives immediately before a copy operation. 1. Use the arrow buttons ( or ) select “Setup”.
www .aleratec.com 28 Using the 1:1 HDD Cruiser Setup Menu 8-06 Button Sound This option allows you to enable or disable the beeping sound heard when you press a button. 1. Use the arrow buttons ( or ) select “Setup”. The following screen will be displayed.
www .aleratec.com 29 Using the 1:1 HDD Cruiser Setup Menu 8-07 Device Info This option displays information about any hard drives connected to the 1:1 HDD Cruiser . 1. Use the arrow buttons ( or ) to scroll to “Setup”. The following screen will be displayed.
www .aleratec.com 30 Using the 1:1 HDD Cruiser Setup Menu 8-08 System Info This function displays information about the 1:1 HDD Cruiser , including the current rmware version. 1. Use the arrow buttons ( or ) to select “Setup”. The following screen will be displayed.
www .aleratec.com 31 Using the 1:1 HDD Copy Cruiser Setup Menu 8-09 Fast Copy The “Fast Copy” option allows you to choose whether to copy the entire source hard disk, or only the used space. 1. Press the arrow buttons ( ) to scroll to “Fast Copy”.
www .aleratec.com 32 Using the 1:1 HDD Cruiser Main Menu USB Mode This option connects the HDDs in the drive bays to a PC via the USB port on the back of the 1:1 HDD Cruiser . 1. Use the arrow buttons ( or ) to select “USB Mode”. The following screen will be displayed.
www .aleratec.com 33 Using the 1:1 HDD Cruiser Main Menu USB Mode - continued 5. Press ENT and the following screen will be displayed. Use the down arrow key ( ) to select “YES” to return to stand-alone mode. The controller will prompt you to restart the device.
www .aleratec.com 34 Using the 1:1 HDD Cruiser Advanced Setup Menu The “Adv Setup” menu contains additional conguration options for the 1:1 HDD Cruiser . 1. Press and hold the ESC button for 3 seconds to enter Adv Setup. The following screen will be displayed.
www .aleratec.com 35 Using the 1:1 HDD Cruiser Advanced Setup Menu 10-01 Detect HDD Delay This function is used to set the time interval between the system’ s re-scans of all connected HDD devices. 1. Press and hold ESC for about 3 seconds to access the “Adv Setup” menu.
www .aleratec.com 36 Using the 1:1 HDD Cruiser Advanced Setup Menu 10-02 Read Error Skip This function can be enabled to ignore any error that occurs during copying. By default, the 1:1 HDD Cruiser will halt the copy operation when it encounters an unreadable area of the source hard disk and display an error .
www .aleratec.com 37 Using the 1:1 HDD Copy Cruiser Advanced Setup Menu 10-03 Update Firmware This function is used to update the 1:1 HDD Copy Cruiser rmware to a later version. Note: Firmware updates are available from Aleratec technical support. 1.
www .aleratec.com 38 Using the 1:1 HDD Cruiser Advanced Setup Menu 10-04 Compare Firmware This function is used to compare the rmware version currently installed with one on a DVD/CD disc. Note: Use “Compare Firmware” after updating the firmware from e-mail or from the Aleratec web site.
www .aleratec.com 39 Using the 1:1 HDD Cruiser Advanced Setup Menu 10-05 Quick Erase HDD This function is used to erase the data of a hard drive quickly . W arning : Backup any important data before using this function. 1. Press and hold ESC for about three seconds to access the “Adv Setup” menu.
www .aleratec.com 40 Using the 1:1 HDD Cruiser Advanced Setup Menu 10-06 H/W Diagnostic This function is used to test various components of the 1:1 HDD Cruiser . 1. Press and hold ESC for about three seconds to access the “Adv Setup” menu. The following screen will be displayed.
www .aleratec.com 41 Using the 1:1 HDD Cruiser Advanced Setup Menu 10-07 Load Default This function is used to restore all factory settings of the 1:1 HDD Cruiser back to their original defaults. 1. Press and hold ESC for about three seconds to access the “Adv Setup” menu.
www .aleratec.com 42 Using the 1:1 HDD Cruiser Advanced Setup Menu 10-08 Link Option (for USB mode) This function is used to decided if “9.USB Mode” will be displayed in the display panel. 1. Press and hold ESC for about three seconds to access the “Adv Setup” menu.
www .aleratec.com 43 Using the 1:1 HDD Cruiser Advanced Setup Menu 10-09 USB Auto-Link This function sets the 1:1 HDD Cruiser to immediately enter USB mode on startup. This allows direct control of the unit from a PC. 1. Press and hold ESC for about three seconds to access the “Adv Setup” menu.
www .aleratec.com 44 Using the 1:1 HDD Cruiser Advanced Setup Menu 10-10 Copy HP A If the source hard disk contains a Host Protected Area (HP A), this option allows you to choose whether or not to copy data within the HP A. 1. Press and hold ESC for about three seconds to access the “Adv Setup” menu.
www .aleratec.com 45 Specifications Power Requirements 1 15 - 230 V AC Switchable Dimensions (depth x width x height) D: 285.8mm W : 187.3mm H: 171.5mm (7.38” x 6.75” x 1 1.25”) W eight 3.36 Kilograms (7.4 Lbs.) Note: Specifications subject to change without notice.
www .aleratec.com 46 T echnical Support After reading this User Guide, if you need additional assistance with this product, please contact Aleratec T echnical Support. Our technical staff will be happy to assist you, but they may need your help to better assist you.
www .aleratec.com 47 Service and Support Aleratec, Inc., Limited Warranty This Limited W arranty covers defects encountered in the course of normal use of this product and does not apply to damage from improper use, abuse, accidents, unauthorized service, or inadequate packaging when shipping the product to Aleratec, Inc.
www .aleratec.com 48 Service and Support Please Note: This W arranty is valid only within the United States and Puerto Rico, and applies only to products that are new and unopened on the date of purchase.
www .aleratec.com 49 Service and Support T o Obtain Warranty Service: Y ou must ship your subsystem to the authorized dealer where your subsystem was purchased within the one year warranty period and no later than thirty days after discovery of claimed defect, whichever occurs rst.
www .aleratec.com 50 T echnical Support F AX Back Form Aleratec, Inc. T echnical Support Fax Back Form Please record the following information to help expedite any warranty claim: Model No.
www .aleratec.com Notes:.
Document Number: 9399058_ENG_Rev . I Copyright © 2010 Specifications subject to change without notice. Aleratec, Inc. 9851 Owensmouth Avenue Chatsworth, CA 91311 U.
Un punto importante, dopo l’acquisto del dispositivo (o anche prima di acquisto) è quello di leggere il manuale. Dobbiamo farlo per diversi motivi semplici:
Se non hai ancora comprato il Aleratec 350103 è un buon momento per familiarizzare con i dati di base del prodotto. Prime consultare le pagine iniziali del manuale d’uso, che si trova al di sopra. Dovresti trovare lì i dati tecnici più importanti del Aleratec 350103 - in questo modo è possibile verificare se l’apparecchio soddisfa le tue esigenze. Esplorando le pagine segenti del manuali d’uso Aleratec 350103 imparerai tutte le caratteristiche del prodotto e le informazioni sul suo funzionamento. Le informazioni sul Aleratec 350103 ti aiuteranno sicuramente a prendere una decisione relativa all’acquisto.
In una situazione in cui hai già il Aleratec 350103, ma non hai ancora letto il manuale d’uso, dovresti farlo per le ragioni sopra descritte. Saprai quindi se hai correttamente usato le funzioni disponibili, e se hai commesso errori che possono ridurre la durata di vita del Aleratec 350103.
Tuttavia, uno dei ruoli più importanti per l’utente svolti dal manuale d’uso è quello di aiutare a risolvere i problemi con il Aleratec 350103. Quasi sempre, ci troverai Troubleshooting, cioè i guasti più frequenti e malfunzionamenti del dispositivo Aleratec 350103 insieme con le istruzioni su come risolverli. Anche se non si riesci a risolvere il problema, il manuale d’uso ti mostrerà il percorso di ulteriori procedimenti – il contatto con il centro servizio clienti o il servizio più vicino.
