Manuale d’uso / di manutenzione del prodotto EU-4230 del fabbricante Edimax Technology
Vai alla pagina of 17
.
i Copyright © by Edimax T echnology Co, L TD. all right s reserved. No part of this publication may be reproduced, t ransmitted, transcribed, stored in a retrieval system, or translated into any lang.
ii T able of Content s 1. Introduction .......................................................................... 1 Features ............................................................................... 1 Package Contents............................
1 1. Introduction It is a combination 10/100M Ethernet adapter and integrated standard-based 3-port USB hub all in one easy to use device. As a fully integrated USB solution, the new US B/Ethernet adapter allows users to easily connect to the Ethernet network with a complete out of the box, Plug-N-Play solution.
2 2. Inst allation Hardware Connection General instructions for installing t he USB 2.0 3 Port Hub with Ethernet Adapter are provided below . Since the des ign of system may vary , refer to your system’ s reference manual for f urther information, if needed.
3 Driver Inst allation On Windows 2000/XP/Server 2003/V ist a 1. With your computer switched on, insert the “USB2.0 to Fast Ethernet Adapter with 3-Port USB Hub” into an available USB2.0 port of your computer . The fo llowing message will appear on your screen, Please click ‘Cancel’ and use the wizard to install driver .
4 2. Please insert the installation CD into your CDROM drive. The Autorun setup programs sh ould run under Windows 2000/XP/Server 2003/Vista, or you ca n click on the “Browse CD” to find other OS drivers in the CD. 3. Connect the Ethernet adapter ’ s USB end to a free USB port of your computer .
5 *Actual strings depend on your operation system. These screen shots are from Windows Vista and might vary slightly for each operation system. Now the installation is complete. Y ou can connect th e adapter to a network device by an Ethernet cable: 1.
6 On MAC OS X 10.3/10.4 1. Insert the provided driver CD into your CD-ROM drive. Double-click the CD and navigat e to the directory of DriversMac10.x. AX88772.
7 4. When the screen below appears, please click Upgrade to perform the software. 5. Please enter your pa ssword as prompted. 6. Please select Continue Installation to install the software when the screen below prompted.
8 7. Please click Restart to reboot the Mac. 8. Connect the Ethernet adapt er to a free USB port. 9. Start System Preferences and select Network , you’ll see the screen as below prompted and please select OK . 10. You will find that a new Ethernet network interface is available.
9 *Actual strings depend on your operation system. These screen shots are from MAC OS X 10.4 and might vary slightly for each operation system. Now the installation is complete. Y ou can connect th e adapter to a network device by an Ethernet cable: 1.
10 V erifying the Driver Inst allation On windows 2000/XP/Server 2003/V ist a Once you finish the installati on, you can open Windows Device Manager to verify if your Ethernet ada pter is properly installed. T o access the Device Manager: On Windows Vi s ta : Right-click Computer on the desktop and click Properties > Device Manager .
11 On MAC OS X 10.3/10.4 Once you finish the installati on, you can open GO > Utilities > System Profile > Hardward > USB > to verify if your Ethernet adapter is properly inst alled. In the USB High-S peed Bus group, an item named ASIXx72A should be displayed.
12 3. S pecifications USB Upstream port x 1 (USB Type A plug) Downstream port x 3 (U SB Type A receptacles) Compliance : USB1.1 & USB 2.0 LAN RJ-45 x 1 (Ethernet 10BASE-T/Fa st Ethernet 100Base-TX.
13 4. Federal Communication Commission Interference S t atement This equipment has been tested and found to comply with the limit s for a Class B digital devi ce, pursuant to Pa rt 15 of FCC Rules. These li mits are designed to provide reason able protection against har mful interference in a residential installation.
14.
Un punto importante, dopo l’acquisto del dispositivo (o anche prima di acquisto) è quello di leggere il manuale. Dobbiamo farlo per diversi motivi semplici:
Se non hai ancora comprato il Edimax Technology EU-4230 è un buon momento per familiarizzare con i dati di base del prodotto. Prime consultare le pagine iniziali del manuale d’uso, che si trova al di sopra. Dovresti trovare lì i dati tecnici più importanti del Edimax Technology EU-4230 - in questo modo è possibile verificare se l’apparecchio soddisfa le tue esigenze. Esplorando le pagine segenti del manuali d’uso Edimax Technology EU-4230 imparerai tutte le caratteristiche del prodotto e le informazioni sul suo funzionamento. Le informazioni sul Edimax Technology EU-4230 ti aiuteranno sicuramente a prendere una decisione relativa all’acquisto.
In una situazione in cui hai già il Edimax Technology EU-4230, ma non hai ancora letto il manuale d’uso, dovresti farlo per le ragioni sopra descritte. Saprai quindi se hai correttamente usato le funzioni disponibili, e se hai commesso errori che possono ridurre la durata di vita del Edimax Technology EU-4230.
Tuttavia, uno dei ruoli più importanti per l’utente svolti dal manuale d’uso è quello di aiutare a risolvere i problemi con il Edimax Technology EU-4230. Quasi sempre, ci troverai Troubleshooting, cioè i guasti più frequenti e malfunzionamenti del dispositivo Edimax Technology EU-4230 insieme con le istruzioni su come risolverli. Anche se non si riesci a risolvere il problema, il manuale d’uso ti mostrerà il percorso di ulteriori procedimenti – il contatto con il centro servizio clienti o il servizio più vicino.
