Manuale d’uso / di manutenzione del prodotto WL-5470POE del fabbricante AirLive
Vai alla pagina of 82
W L-5470POE 54Mbps P oE Multi-Function Wi r e l e s s A P User’ s Manual.
Clause Description ■ EN 300 328 v1.7.1 Electromagnetic compatibility and Radio spectrum Matters (ERM); (2006-10) Wideband transmission equipment operating in the 2.
AirLive WL-5470POE CE Declaration S tatement Country Declaration Country Declaration cs Č esky [Czech] OvisLink Corp. tímto prohl ašuje, že tento AirLive WL-5470POE je ve shod ě se základními požadavky a dalšími p ř íslušnými ustanoveními sm ě rnice 1999/5/ES.
WL-5470 POE User ’s Manual 1 Regulatory Information Federal Communication Commission Interference S t atement This equipment has been tested and found to co mply with the limits for a Class B digit al device, pursuant to Part 15 of the FCC Ru les.
WL-5470 POE User ’s Manual 2 T able of Content s 1. Introduction ...........................................................................................................................4 1.1 Overview ..............................................
WL-5470 POE User ’s Manual 3 4.6 NTP Settings ............................................................................................................ 68 5. System S tatus .........................................................................
WL-5470 POE User ’s Manual 4 1. Introduction 1.1 Overview AirLive WL-5470POE is an IEEE802.1 1b/g compliant 1 1 Mbps & 54 Mbps Ethernet Wireless Access Point. The Wireless Access Point is equipped with two 10/100 M Auto-sensing Ethernet ports for connectin g to LAN and also for cascading to next Wireless Access Point.
WL-5470 POE User ’s Manual 5 Application Example 1 Example 2.
WL-5470 POE User ’s Manual 6 1.2 Firmware Features AirLive Wireless AP Firmware Featur es The Most Powerful AP Firmware Ever! WL-5470POE As the leading global WISP solution provider , AirL ive understands the applicat ion environments of WISP operators.
WL-5470 POE User ’s Manual 7 T raffic Control QoS Function T raffic Control is a great tool to control the ban dwidth of the WISP subscri bers. Therefore, the WISP operators can of fer differ ent cl.
WL-5470 POE User ’s Manual 8 SSH login WL-5470POE provides SSH se cure connection for remo te management. The program SSH (Secure Shell) is a secure replacement for telnet. It provides a n encrypted channel for loggin g into WL-5420POE over a network, executing command s on WL-5470P OE from your workstation.
WL-5470 POE User ’s Manual 9 1.3 Inst alling WL-5470POE This section descri bes the installation p rocedure for t he WL-5 470POE. It start s with a summary of the content of the package you have purcha sed, followed by st eps of how to p ower up and connect the WL-5470PO E.
WL-5470 POE User ’s Manual 10 Item # Function Description A Power Adaptor 12V 1A power supply adaptor delivered with produ ct. B 1/PoE/W AN 802.3af PoE LAN port or W AN port(Gateway Mode only) C LAN port 2 LAN port D (Factory) Reset Press over 3 seconds to reboot this devi ce.
WL-5470 POE User ’s Manual 11 1.3.4 Hardware Connection Note: Before you starting hardwa re connection, you are advised to find an approp riate location to place the Access Point. Usually , the best place for the Access Point is at the center of your wireless network, with line of straight to all your wireless st ations.
WL-5470 POE User ’s Manual 12 ． Check the LED: The Power and LAN # LED should be ON. LAN# LED will even blink if there is traffic. The Link/Act LED will be on in static when associated with a statio n and blink whenever this AP receives data packets in the air.
WL-5470 POE User ’s Manual 13 2. Operation Mode The WL-5470POE device provides all 8 modes of wireless op erational applications with: Mode Radio LAN 1 LAN 2 AP AP LAN LAN Client Client LAN LAN Brid.
WL-5470 POE User ’s Manual 14 2.0 Change Operation Mode WL-5470POE is default in AP mode. If the mode had been cha nged, click the “Mode” button to change back. T o change operation Mode: 1. Click on “Mode“ 2. Select Operation Mode in the main pa ge 3.
WL-5470 POE User ’s Manual 15 2.1 About the Operation Modes This device provides four operational applicatio ns with Access Point, Bridge, Clie nt (Ad-hoc) and Client (Infrastructure) modes, which are mutu ally exclusive. This device is shipped with configuratio n that is func tional right out of the box.
WL-5470 POE User ’s Manual 16 2.1.2 Client Mode If set to Client (Infrastructure) mode, this device can work like a wi reless station when it’ s connected to a computer so that the computer can se nd pack ets from wired end to wireless interface. Refer to the illustration below .
WL-5470 POE User ’s Manual 17 2.1.3 Bridge Mode The WDS (Wireless Di stributed System) function let this access point ac t s as a wire less LAN access poin t and repeater at the same time. Users can use this feature to build u p a large wireless network i n a large space like airport s, hotels and schools …etc.
WL-5470 POE User ’s Manual 18 2.1.4 WDS Repeater Refer to the illustration below . While acting as Bridge s, AP1 (with S tation 1 being a ssociated to) and AP2 (with S tation 2 being a ssociated) can comm unicate with each other through wireless interface (with WDS).
WL-5470 POE User ’s Manual 19 2.1.5 Universal Repeater An universal repeater can also extend the wirel ess coverage of another wireless AP or router . But the universal repeater does not requi re the remote device to have WDS function. Therefore, it can work with almost any wireless d evice.
WL-5470 POE User ’s Manual 20 2.1.6 WISP (Client Router) mode In WISP mode, the AP will behave just the same as the Client mode for wireless function. However , router functions are added between the wirel ess W AN side and the Ethernet LA N side. Therefore, the WISP subscriber ca n share the WISP conn ecti on without the need for extra router .
WL-5470 POE User ’s Manual 21 2.1.7 WISP + Univ ersal Repeater mode In this mode, the AP behaves virtually the same as the WISP mode, except one thing: the AP can also send wireless signal to the LAN side.
WL-5470 POE User ’s Manual 22 2.1.8 Gateway (AP + Router) In this mode, router functions are added betwe en one Ether net port and the other network inte rface.
WL-5470 POE User ’s Manual 23 3. Wireless Settings This section guides you to configu re the mode of the Radio interface. 3.1 Access Point Mode Settings ¾ Alias Name : Another name for WL-5470POE.
WL-5470 POE User ’s Manual 24 communication. The number of channels supported depe nds on the regi on of this Access Point. All stations communicating wi th the Access Point must use the same channel. ¾ Wireless Client Isolation: This is to se parate wireless client if ne eded.
WL-5470 POE User ’s Manual 25 3.2 Client Mode Settings ¾ Alias Name : Another name for WL-5470POE. ¾ Disable Wireless LAN Interface: Check the box to disable the Wirele ss LAN Interface, by so doing, you won’t be able to make wireless connection with th is Access Point in the network you are located.
WL-5470 POE User ’s Manual 26 ¾ Auto Mac Clone (Single Ethernet Cli ent): If your ISP rest ricts service to PCs o nly , use the MAC Clone feature to copy a PC Media Access Control (MAC) ad dress to your router . This procedure will cause the router to appear as a single PC, while al lowing online access to multiple comp uters on your network.
WL-5470 POE User ’s Manual 27 3.3 Bridge Mode Settings ¾ Alias Name : Another name for WL-5470POE. ¾ Disable Wireless LAN Interface: Check the box to disable the Wirele ss LAN Interface, by so doing, you won’t be able to make wireless connection with th is Access Point in the network you are located.
WL-5470 POE User ’s Manual 28 allows a network design to include sp are (redundant) lin ks to provide automatic backup p aths if an active link fails, without the danger of bridge loop s, or the need for manual enabling/disabling of these backup links.
WL-5470 POE User ’s Manual 29 3.4 WDS Repeater Mode Settings ¾ Alias Name : Another name for WL-5470POE. ¾ Disable Wireless LAN Interface: Check the box to disable the Wirele ss LAN Interface, by so doing, you won’t be able to make wireless connection with th is Access Point in the network you are located.
WL-5470 POE User ’s Manual 30 WLAN must use the same SSID. It is ca se-sensiti ve and must not exceed 32 characters. A device will not be permitted to join the BSS unless it can provide t he unique SSID. An SSID is also referred to as a network name because e ssentially it is a name that identifies a wireless network.
WL-5470 POE User ’s Manual 31 3. Click on “Signal Survey” button. 4. A pop up page show s the signal strength. 5. The signal strength refre sh every 3 seconds, you can then change your anten na for a better signal. T o configure the security connection, please refer to Section 3.
WL-5470 POE User ’s Manual 32 3.5 Universal Repeater Mode Settings ¾ Alias Name : Another name for WL-5470POE. ¾ Disable Wireless LAN Interface: Check the box to disable the Wirele ss LAN Interface, by so doing, you won’t be able to make wireless connection with th is Access Point in the network you are located.
WL-5470 POE User ’s Manual 33 ¾ 802.1d Sp anning T ree: S panning tree is to prevent bridge loop when there a re multiple active paths between network node s.
WL-5470 POE User ’s Manual 34 3.6 WISP Mode Settings ¾ Alias Name : Another name for WL-5470POE. ¾ Disable Wireless LAN Interface: Check the box to disable the Wirele ss LAN Interface, by so doing, you won’t be able to make wireless connection with th is Access Point in the network you are located.
WL-5470 POE User ’s Manual 35 Some ISP/WISP has speci al inquire for TTL feature that did not decrease the T TL value when pass the first router of ISP/WISP . When using PPPoE for W AN access, WL -5470POE provides flexible c onfiguration for TTL value.
WL-5470 POE User ’s Manual 36 ¾ Vir tu al Se rve r: Y ou can use Virtual Server Settings to prov ide con nection on internet. For example, you can have your own web server at home and provide ac cess on internet. This will need port 80 by default for Virtual Server Settings.
WL-5470 POE User ’s Manual 37 ¾ DMZ: Y ou can use DMZ Settings to provide conne ction on internet. For example, you can have your own web server at home a nd provide access on inte rnet. This will need port 80 by default for Virtual Server Settings.
WL-5470 POE User ’s Manual 38 3.7 WISP + Universal Mode Settings ¾ Alias Name : Another name for WL-5470POE. ¾ Disable Wireless LAN Interface: Check the box to disable the Wirele ss LAN Interface, by so doing, you won’t be able to make wireless connection with th is Access Point in the network you are located.
WL-5470 POE User ’s Manual 39 ¾ SSID of Extended Interface: This field is the SSID of remote Access Point to connec t to. ¾ W AN Port: Allow user to set the channel manually or automatically . If set channel manually , just select the channel you want to specify .
WL-5470 POE User ’s Manual 40 When using PPPoE for W AN access, WL -5470POE provides flexible c onfiguration for TTL value. The default value is 255 and does not have t o change in a normal situation. Y ou can check with your ISP/WISP if T TL value causes connection problem.
WL-5470 POE User ’s Manual 41 ¾ Special Appl ication: This is to enabl e internet service such a s sound, video and so on. Th e routing firewall often stop s these services for security reason. ¾ DMZ: Y ou can use DMZ Settings to provide conne ction on internet.
WL-5470 POE User ’s Manual 42 3.8 Gateway Mode (AP + Router) Settings Import ant Notice: When change to Gate w ay mode, the LAN 2 becomes to W AN port.
WL-5470 POE User ’s Manual 43 The default is 2.4GHz (B+G) mode. ¾ Site Survey: Site survey helps to find out available access point around. Y ou can also check to prevent using same SSID or channel with other AP .
WL-5470 POE User ’s Manual 44 Some ISP/WISP has speci al inquire for TTL feature that did not decrease the T TL value when pass the first router of ISP/WISP . When using PPPoE for W AN access, WL -5470POE provides flexible c onfiguration for TTL value.
WL-5470 POE User ’s Manual 45 ¾ Vir tu al Se rve r: Y ou can use Virtual Server Settings to prov ide con nection on internet. For example, you can have your own web server at home and provide ac cess on internet. This will need port 80 by default for Virtual Server Settings.
WL-5470 POE User ’s Manual 46 ¾ DMZ: Y ou can use DMZ Settings to provide conne ction on internet. For example, you can have your own web server at home a nd provide access on inte rnet. This will need port 80 by default for Virtual Server Settings.
WL-5470 POE User ’s Manual 47 3.9 Wireless Security Here you can configure the security of your wirel ess network. Selecting differe nt method will enable you to have different level of security .
WL-5470 POE User ’s Manual 48 WP A-PSK (TKIP) / WP A-PSK (AES) Wi-Fi Protected Acces s (WP A) with Pre-Shared Key (PSK) pro vides better security than WEP keys. It does not require a RADIUS server in order to provide asso ciation auth entication, but y ou do have to enter a shared key for the authentication purpose.
WL-5470 POE User ’s Manual 49 WP A2-PSK (AES) Enter the Pre-shared Key to initiate WPA2 security. All devices try to access the network should have the matching encryption key. Pre-shared Key : This is an ASCII string with 8 to 63 ch aracters. Please make sure that both the WL-5470POE and the wireless cli ent stations use the same key .
WL-5470 POE User ’s Manual 50 802.1X (Radius) Authentication by the remote server (RADIUS Server). Security: Y ou can select None, WEP , WP A (TKIP), WP A ( AES), WP A2 (AES), WP A2 Mixed method for data encryption. ~ WEP: 802.1x Authentication is enabled and the RADIUS Server will proceed to check the 802.
WL-5470 POE User ’s Manual 51 3.10 Advanced Wireless Settings When click on Advanced Setup button under client m ode, a pop-up window ap pears and show para meter as follow: Fragment ation: Fragmentatio n mechanism is used for improving the efficien cy when high traffic flows al ong in the wireless network.
WL-5470 POE User ’s Manual 52 Beacon Interv al: Beacon Interval is the amount of time betwe en beacon transmissi ons. Before a station enters power save mode, the st ation needs the beacon interval to know when to wake up to receive the beacon (and learn wheth er there are buf f ered frames at the access point).
WL-5470 POE User ’s Manual 53 3.1 1 Access Control When Enable Wireless Access Control is checked, only those client s whose wireless MAC addresses listed in the access co ntrol list can access t his Access Point. I f the list contains no entrie s with this function being enabled, then no client s will be able to access this Access Point.
WL-5470 POE User ’s Manual 54 3.12 QoS T raffic Control What is T raffic Control QoS? T raffic Control is a great tool to control the bandwidt h of the WISP subscribers.
WL-5470 POE User ’s Manual 55 The AP’s W eb UI will tell you which types of output rate it supports, it dif fers in each wireless mode. In the following example: z The AP is in Gateway Mode z The .
WL-5470 POE User ’s Manual 56 Configure the T raffic Control QoS From the Mode Setting page, plea se choose the “T raffic Control(QoS)” on the bottom of the list. Once you click on the “setup” button, a new wi ndow will pop-up with the Traf fic Control settings.
WL-5470 POE User ’s Manual 57 A. Interface Control Settings: In the Interface Control Settings, the AP only controls the tot a l bandwid th limit of an interface. For exampl e, if you want to limit the output data rate of the LAN to 512K and the output dat a rate of WLAN to 1024K.
WL-5470 POE User ’s Manual 58 Please follow the step below to create a new policy “V IP” 1. Enter “VIP” for the “PolicyName” 2. Enter “512” for the “LAN Out Rate” 3. Enter “1024” for the “WLAN Out Rate” 4. Enter “VIP Subscrib er” for the “Comment” 5.
WL-5470 POE User ’s Manual 59 4. If you have defined a Policy already , please choose a Policy name. The “Out Rates” will be automatically pasted from the Policy tem plate. Y ou cannot change the Out Rates if you have chosen a Policy 5. If you want to define new Data Rate, please do not choose any poli cies.
WL-5470 POE User ’s Manual 60 Application Example Example1: AP Mode T raffic Control In this example, the AP is installed out door to provide Internet service.
WL-5470 POE User ’s Manual 61 4. Please fill in the 2 entries as shown on the graphic below 5. Reboot the AP Example2: Client Mode T raffic Control In the following example, the AP is use d as the wirele ss client to the WISP Service. The Service provider need to restrict the bandwid th of the AP to 1024K Downstream and 128K Upst ream.
WL-5470 POE User ’s Manual 62 4. System Management 4.1 LAN Interface Setup In this page, you can chan ge the TCP/IP settings of this Access Point; select to enable/disable the DHCP Client, 802.1d S panning Tree, and Clon e MAC Address. IP Addres s: This field can be modified only when DHCP Client is disabled.
WL-5470 POE User ’s Manual 63 Port Number: The default http port of the web manag ement interface. Y ou can change the port number to prevent unexpected access. Enable SSH: Except telnet, WL-5470POE provides SSH for secu re command line management. Y ou can enable the feature here.
WL-5470 POE User ’s Manual 64 4.2 Upgrade Firmware T o Upgrade Firmware: 1. Download the latest firmware from your distributor and save the file on the hard drive. 2. S tart the browser , open the configuration page, click on Other , and click “Upgrade Firm w are” to enter the Upgrade Firmware windo w .
WL-5470 POE User ’s Manual 65 4.3 Save / Reload Settings This function enables user s to save the current configuratio ns as a file (i.e. config.dat) T o load configu ration from a file, enter the file name or click Brow se… to find the file from your computer .
WL-5470 POE User ’s Manual 66 4.4 Change Password For secure reason, it is recommended that you set the ac count to access the web server of this Access Point. Leaving the user name and password bl ank will disable the prote ction. The login scree n prompts immediately once you finish setting the account and p assword.
WL-5470 POE User ’s Manual 67 4.5 Enable System Log This function can list all log information about device. Enable Log: Enabled or Disabled di splay system log information. System All: List system all log informati on. Wireless Only List: wirel ess log information only .
WL-5470 POE User ’s Manual 68 4.6 NTP Settings This function can set system time from local computer or Internet. Current Ti me: Setting system time Enable NTP client update: Enable or Di sable setting system from Internet NTP Server . Time Zone Select: Select system time zone.
WL-5470 POE User ’s Manual 69 5. System S t atus System status shows devi ce’s cu rrent configuration and operation st atus. T o check the status, click the “St atus” bottom on the title bar . 5.1 System Dat a System data highligh ts the current configuration of the device.
WL-5470 POE User ’s Manual 70 5.2 S t atistics S tatistics shows the tot al packet s pass through the interface. Active Client s This feature shows the inform ation of wired and wirel ess client connect s to the device.
WL-5470 POE User ’s Manual 71 6 System Recovery WL-5470POE provides the system rec overy emergency code function that can restore the machi ne after firmware crashed. Please follow the step s below: 1. Unplug the power of WL-5 470POE. 2. Hold the reset button while plugging the pow er .
WL-5470 POE User ’s Manual 72 7. Specification Feature 54Mbps Multi-function POE AP 2 x 10/100Mbps port s, 4MB Flash, 16MB SDRAM 20dBm(EU) or 26dBm(South America) Output Power R-SMA antenna connector IEEE802.
WL-5470 POE User ’s Manual 73 Hide ESSID 802.1x MAC Access Cont rol MAC Access Table Wireless Client Isolation SSID, Channel, RTS Threshold, Frag Thre shold Environmental Operating temperature: 0~60 ℃ Operating humidity (non-condensing): 20~8 0% Storage temperature: -20~65 ℃ Storage humidity: 95% Max Power Supply DC12V / 48VDC(802.
WL-5470 POE User ’s Manual 74 Appendix Command Line Management WL-5470POE provides telnet and Secu re Shell (SSH) for remote management. Y ou can use telnet or some free software such as putty ( http://www .chiark.greenend.org.uk /~sgt atham/putty/download.
WL-5470 POE User ’s Manual 75 wpa [tkip|aes] <pass|hex> <key> [gklt] wpa2 [mixed| aes] <pass|hex> <key> [gklt] 1x [off|on <po rt> <ip_addr> <password> <w.
WL-5470 POE User ’s Manual 76 protocol status sys server access icmp <0:disabled|1:enabled> passthruvpn ipsec <0:disa bled|1:enabled> passthruvpn pptp <0:disabled|1:enabled > passt.
WL-5470 POE User ’s Manual 77 <trig_from_port> <trig_to_port>] proto: 1. TCP+UDP , 2. TCP , 3. UDP [Mode] Remote Management sys server access web <0:disabled|1:enabled > port web &.
WL-5470 POE User ’s Manual 78 enabledos enable <cleara ll>[Packets/Second]<sele ctall>[Packet s/Second]<sysflood syn>[Packet s/Second]<sysfloodfi n>[Packet s/Second]<sysfl.
WL-5470 POE User ’s Manual 79 sys passwo rd [pw] (if [pw] is empty , then clear the pass word) [Other] Save / Reload Setting save factorydefault [Other] NTP sys ntp showcurrenttime se tcurrenttime &.
Un punto importante, dopo l’acquisto del dispositivo (o anche prima di acquisto) è quello di leggere il manuale. Dobbiamo farlo per diversi motivi semplici:
Se non hai ancora comprato il AirLive WL-5470POE è un buon momento per familiarizzare con i dati di base del prodotto. Prime consultare le pagine iniziali del manuale d’uso, che si trova al di sopra. Dovresti trovare lì i dati tecnici più importanti del AirLive WL-5470POE - in questo modo è possibile verificare se l’apparecchio soddisfa le tue esigenze. Esplorando le pagine segenti del manuali d’uso AirLive WL-5470POE imparerai tutte le caratteristiche del prodotto e le informazioni sul suo funzionamento. Le informazioni sul AirLive WL-5470POE ti aiuteranno sicuramente a prendere una decisione relativa all’acquisto.
In una situazione in cui hai già il AirLive WL-5470POE, ma non hai ancora letto il manuale d’uso, dovresti farlo per le ragioni sopra descritte. Saprai quindi se hai correttamente usato le funzioni disponibili, e se hai commesso errori che possono ridurre la durata di vita del AirLive WL-5470POE.
Tuttavia, uno dei ruoli più importanti per l’utente svolti dal manuale d’uso è quello di aiutare a risolvere i problemi con il AirLive WL-5470POE. Quasi sempre, ci troverai Troubleshooting, cioè i guasti più frequenti e malfunzionamenti del dispositivo AirLive WL-5470POE insieme con le istruzioni su come risolverli. Anche se non si riesci a risolvere il problema, il manuale d’uso ti mostrerà il percorso di ulteriori procedimenti – il contatto con il centro servizio clienti o il servizio più vicino.
