Manuale d’uso / di manutenzione del prodotto AVR-2805 del fabbricante Denon
Vai alla pagina of 62
A V SURROUND RECEIVER A VR-2805 OPERA TING INSTRUCTIONS BEDIENUNGSANLEITUNG MODE D’EMPLOI ISTRUZIONI PER L ’USO INSTRUCCIONES DE OPERACION GEBRUIKSAANWIJZING BRUKSANVISNING MODE ANALOG EXT.
2 CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK). NO USER SERVICEABLE P ARTS INSIDE.
“ SERIAL NO. PLEASE RECORD UNIT SERIAL NUMBER A TTACHED TO THE REAR OF THE CABINET FOR FUTURE REFERENCE ” 3 ENGLISH 2 We greatly appreciate your purchase of the A VR-2805. 2 T o be sure you take maximum advantage of all the features the A VR-2805 has to offer , read these instructions carefully and use the set properly .
4 ENGLISH 4 FEA TURES 1. Dolby Digital Using advanced digital processing algorithms, Dolby Digital provides up to 5.1 channels of wide- range, high fidelity surround sound. Dolby Digital is the default digital audio delivery system for DVD and North American DTV .
5 ENGLISH • Do not plug in the AC cord until all connections have been completed. • Be sure to connect the left and right channels properly (left with left, right with right). • Insert the plugs securely . Incomplete connections will result in the generation of noise.
6 ENGLISH IN S-VIDEO OUT S-VIDEO OUT S-VIDEO OUT IN S-VIDEO OUT IN S-VIDEO B B Connecting the video components equipped with S-Video jacks • When making connections, also refer to the operating instructions of the other components.
7 ENGLISH Connecting the antenna terminals DIRECTION OF BROADCASTING ST A TION 75 Ω /ohms COAXIAL CABLE FM ANTENNA FM INDOOR ANTENNA (Supplied) AM LOOP ANTENNA (Supplied) AM OUTDOOR ANTENNA GROUND • An F-type FM antenna cable plug can be connected directly .
8 ENGLISH R VIDEO OUT S-VIDEO OUT OPTICAL L R VIDEO OUT L OUTPUT OUTPUT LINE OUT DIGITAL OUT VIDEO OUT S-VIDEO OUT VIDEO OUT LINE OUT S-VIDEO OUT S-VIDEO OUT L R L R L R Connecting the video component equipped with V . AUX jacks T o connect the video signal, connect using a 75 Ω /ohms video signal cable cord.
9 ENGLISH Connections • When making connections, also refer to the operating instructions of the other components. ( L ) ( R ) ( L ) ( R ) ( L ) ( R ) ( L ) ( R ) Connection jack for subwoofer with built-in amplifier (super woofer), etc.
10 ENGLISH er t y !5 !3 u i o !0 !1 !2 !4 qw Display q INPUT SIGNAL indicator The respective indicator will light corresponding to the input signal. w INPUT SIGNAL CHANNEL indicator The channels included in the input source will light. This displays bitstream signal channel.
11 ENGLISH 7 SETTING UP THE SYSTEM • Once all connections with other A V components have been completed as described in “ CONNECTIONS ” (see pages 5 to 9), make the various settings described below on the monitor screen using the A VR-2805 ’ s on-screen display function.
12 ENGLISH 4. Advanced Playback Advanced Playback Default settings Audio Delay Dolby Digital Setup Auto Surround Mode Set the audio delay to delay time the sound and synchronize it with the picture. T urn the audio compression on or off when down- mixing Dolby Digital signals.
13 ENGLISH Before setting up the system 2 Display the System Setup Menu. 1 Check that all the connections are correct, then turn on the main unit ’ s power . Setup will not be possible when the unit is set to Pure Direct ON or when the headphones are plugged in.
14 ENGLISH 4 q Select the “ Start ” . Start *Auto Setup (Remote control unit) w Press the CURSOR left button. 5 Start the measurements. Measurement of each channel is performed as follows. Display FL FR CS W 2 3 SBL SBR 1 SL SR 1 Only the front speakers (A) is measured.
15 ENGLISH 1 Select the items. The measurement results of each item can be checked here. Sp Config.Check *Auto Setup Check of the measurement results 2 Press the ENTER button and display the verification screen. [Speaker Config. Check] [Delay T ime Check] [Channel Level Check] 3 If the check ends, press the ENTER button again.
16 ENGLISH 1-3 Setting the Room EQ Setup Select the setting of an Equalizer that has been set with Auto Setup or Manual EQ. 1 Select “ Room EQ Setup ” at the Auto Setup / Room EQ Menu. Room EQ Setup *AutoSet/RoomEQ 2 Display the Room EQ Setup screen.
17 ENGLISH 1-6 Check the EQ parameter • The frequency characteristic of each speaker is rectified and the tone of the speaker is unified. The EQ parameters that were set in Auto Setup can be checked. This item is automatically displayed, after the measurement result of the “ Auto Setup / Room EQ ” is decided.
18 ENGLISH 3 Set whether speakers are connected or not and, if so, their size parameters. q Select the speaker FrontSp: Large *Speaker Config w Select the parameter Center Sp. Front Sp. Subwoofer Surround Sp. Surround back Sp. 4 ENTER the setting. The Speaker Setup Menu reappears.
19 ENGLISH 4 Once “ Meters ” or “ Feet ” is selected in step 3, the Delay T ime screen appears automatically. FL : 3.6m *Delay Time 5 Select the speaker to be set. The picture of the speaker selected blinks. 6 Set the distance between the center speaker and listening position.
20 ENGLISH 2-3 Setting the Channel Level • Use this setting to adjust so that the playback level between the different channels is equal. • From the listening position, listen to the test tones produced from the speakers to adjust the level. • The level can also be adjusted directly from the remote control unit.
21 ENGLISH 2-4 Setting the crossover frequency • Set the crossover frequency mode according to the speaker system being used. 1 Select the “ Crossover Frequency ” at the Speaker Setup Menu. Crossover Freq. *Speaker Setup 2 Display the Crossover Frequency screen.
22 ENGLISH 1 2 At the System Setup Menu select “ Input Setup ” . Display the Input Setup Menu screen. Input Setup *System Setup Setting the Input Setup 3 (Remote control unit) (Remote control unit) 3-1 Setting the Digital In Assignment • This setting assigns the digital input jacks of the A VR-2805 for the different input sources.
23 ENGLISH 3 Select the component (Y , P B /C B and P R /C R ) video input terminal to be assigned to the input source. q Select the source selection. w Select the component video input terminal. Select “ NONE ” for sources for which the component (Y , P B /C B and P R /C R ) video input is not to be used.
24 ENGLISH 3-5 Auto T uner Presets Use this to automatically search for FM broadcasts and store up to 56 stations at preset channels A1 to 8, B1 to 8, C1 to 8, D1 to 8, E1 to 8, F1 to 8 and G1 to 8.
25 ENGLISH 4-3 Setting the Auto Surround Mode The surround mode used at last for the three types of input signals shown below is stored in the memory , and the signal is automatically played with that surround mode the next time it is input. Note that the surround mode setting is also stored separately for the different input sources.
26 ENGLISH 5-2 Setting the Zone2 V ol. Level Set the Zone2 pre-out output level adjustment. 1 At the Option Setup Menu select “ Zone2 V ol. Level ” . Zone2 Vol. Lev. *Option Setup 2 Display the Zone2 V ol. Level screen. 3 Select the desired setting.
27 ENGLISH 5-5 Setting the Muting Level • This sets the amount of attenuation at audio output muting. 1 Select “ Muting Level ” at the Option Setup Menu. Muting Level *Option Setup 2 Display the Muting Level screen. 3 Select the desired setting.
28 ENGLISH 5-7 Protecting the setting The system setup settings can be locked so that they cannot be changed easily . 1 Select “ Setup Lock ” at the Option Setup Menu. Setup Lock *Option Setup 2 Display the Setup Lock screen. 3 Select “ ON ” , to lock the system setup settings.
29 ENGLISH • Point the remote control unit at the remote sensor on the main unit as shown on the diagram. • The remote control unit can be used from a straight distance of approximately 7 meters f.
30 ENGLISH The included remote control unit can be used to operate devices of different brands by registering the preset number corresponding to the brand of your device. For some models the remote control unit or the device may not operate properly .
31 ENGLISH NOTES: • For this CD, CDR, MD and T APE components, buttons can be operated in the same way as for Denon audio components. • The television can be operated in the DVD/VDP , VCR and TV modes.
32 ENGLISH The accessorious remote control unit is equipped with “ system call ” function allowing a series of remote control signals to be transmitted by pressing a single button.
33 ENGLISH Resetting 1 Press the USE/LEARN button with the tip of a pen, etc., to set the learn mode. • The mode selector buttons and LEARNED/TX indicator flash. 2 Press the mode button of the equipment that is to be reset. • Mode button and LEARNED/TX indicator flash.
34 ENGLISH 9 OPERA TION 4 3 5 4 2 Before operating 1 Refer to “ CONNECTIONS ” (pages 5 to 9) and check that all connections are correct. 2 Select “ AMP ” using the AMP button. (only when operating with the remote control unit) (Main unit) • ¢ ON The power turns on and indicator is light.
35 ENGLISH 3 Select the play mode. Example: Stereo SELECT (Main unit) The volume can be adjusted within the range of – 80 to 0 to 18 dB, in steps of 0.5 dB. However , when the channel level is set as described on page 20 or pages 39, if the volume for any channel is set at +0.
Use this to mute the audio output temporarily . Press the MUTING button. The Muting level is the same level as set with “ 5-5 Setting the Muting Level ” .
37 ENGLISH 1 [5] Checking the currently playing program source, etc. 1 1 1 [4] Combining the currently playing sound with the desired image Cancelling simulcast playback. • Select “ SOURCE ” using the VIDEO SELECT button and the FUNCTION button.
38 ENGLISH 10 MUL TI ZONE MUL TI ZONE MUSIC ENTERT AINMENT SYSTEM • When the outputs of the “ ZONE2 ” OUT terminals are wired and connected to integrated amplifiers installed in other rooms, different sources can be played in rooms other than the main zone in which this unit and the playback devices are installed.
39 ENGLISH 3 2 1 4 5 [2] Remote control unit operations during multi-source playback (selecting the input source) This operation is not possible in the REC OUT mode. This operation is possible when ZONE2 mode is selected. 1 Select “ ZONE2 ” using the ZONE2 button.
40 ENGLISH Fader function • This function makes it possible to lower the volume of the front channels (FL, C and FR) or the rear channels (SL, SR, SBL and SBR) together . Use it for example to adjust the balance of the sound from each position when multi-channel music sources are played.
41 ENGLISH 6 Set the various surround parameters. CH SEL ENTER (Remote control unit) 7 If the setting ends, press the “ ENTER ” or “ SURROUND P ARAMETER ” button. NOTE: • There are four Dolby Surround Pro Logic modes (NORMAL, PHANTOM, WIDE and 3 STEREO).
42 ENGLISH Dolby Digital mode (only with digital input) and DTS Surround mode (only with digital input) Playback with a digital input 1 Select the input source. q Select an input source set to digital (COAXIAL/OPTICAL) (see page 22). w Set the input mode to “ AUTO ” or “ DTS ” .
43 ENGLISH Checking the input signal The input signal can be checked by pressing the remote control unit ’ s ON SCREEN button. SIGNAL: Displays the type of signal (DTS, DOLBY DIGIT AL, PCM, etc.). fs: Displays the input signal ’ s sampling frequency.
44 ENGLISH Adjusting the Audio Delay When watching a DVD or other video source, the picture on the monitor may seem delayed with respect to the sound. In this case, adjust the audio delay to delay the sound and synchronize it with the picture. The audio delay setting is stored separately for each input source.
45 ENGLISH 1 3 4 7 8 9 10 VIDEO GAME ROCK ARENA JAZZ CLUB VIRTUAL MA TRIX WIDE SCREEN 5CH/7CH STEREO Use this to enjoy video game sources. Use this mode to achieve the feeling of a live concert in an arena with reflected sounds coming from all directions.
46 ENGLISH Room EQ / T one control setting • Use the Room EQ setting and the tone control setting to adjust the bass and treble as desired. • Operate the Room EQ and the tone control from the remote control unit. 1 Press the surround parameter button.
47 ENGLISH 2 Surround modes and parameters Channel output C C C C C C C C C C C C C C C C C C Mode FRONT L/R CENTER SURROUND L/R SURROUND BACK L/R SUB- WOOFER E E B B B B B B B B B B B B B B B E E E B.
48 ENGLISH SURROUND P ARAMETER Mode ROOM SIZE EFFECT ON/OFF EFFECT LEVEL DELA Y TIME SUBWOOFER ON/OFF P ANORAMA DIMENSION CENTER WIDTH CENTER IMAGE SW AT T Signals and adjustability in the different m.
49 ENGLISH Preset memory 2, 5 4 3 1 Use the “ Auto tuning ” or “ Manual tuning ” operation to tune in the station to be preset in the memory . 2 Press the MEMORY button. (Remote control unit) 3 Press the SHIFT button and select the desired memory block (A to G).
50 ENGLISH RDS (Radio Data System) RDS (works only on the FM band) is a broadcasting service which allows station to send additional information along with the regular radio program signal. The following three types of RDS information can be received on this unit: 2 Program T ype (PTY) PTY identifies the type of RDS program.
51 ENGLISH PTY search Use this function to find RDS stations broadcasting a designated program type (PTY). For a description of each program type, refer to “ Program T ype (PTY) ” . 1 3 4 2 3 1 4 Press the CHANNEL + (UP) or – (DOWN) button to automatically begin the PTY search operation.
52 ENGLISH 14 LAST FUNCTION MEMORY RT (Radio T ext) “ RT ” appears on the display when radio text data is received. When the RDS button is pressed until “ RT ” appears on the display while receiving an RDS broadcast station, the text data broadcast from the station is displayed.
53 ENGLISH FL C SW FR FL C SW FR SL SR SB SL SR SB Multiple surround speakers Movie theater sound field Listening room sound field In this case it is important to achieve the same sense of expansion as in a movie theater with the surround channels.
54 ENGLISH • Set the front speakers, center speaker and subwoofer in the same positions as in example (1). • It is best to place the surround speakers directly at the side or slightly to the front of the viewing position, and 60 to 90 cm above the ears.
55 ENGLISH 2 Dolby Digital and Dolby Pro Logic Comparison of home surround systems No. recorded channels (elements) No. playback channels Playback channels (max.) Audio processing High frequency playback limit of surround channel Dolby Digital 5.1 ch 5.
56 ENGLISH Media CD LD (VDP) DVD Dolby Digital output jacks Optical or coaxial digital output (same as for PCM) 2 Optical or coaxial digital output (same as for PCM) 2 Optical or coaxial digital output (same as for PCM) 3 Playback method (reference page) Set the input mode to “ AUTO ” or “ DTS ” (page 34).
57 ENGLISH DTS 96/24 The sampling frequency , number of bits and number of channels used for recording of music, etc., in studios has been increasing in recent years, and there are a growing number of high quality signal sources, including 96 kHz/24 bit 5.
58 ENGLISH 3. Input Setup Input Setup Default settings Digital In Assignment Ext. In Subwoofer Level Component In Assign Video Input Mode Auto T uner Presets This assigns the digital input jacks for the different input sources. Set the Ext. In Subwoofer terminal playback level.
59 ENGLISH Surround modes and parameters 2 Surround modes and parameters Channel output C C C C C C C C C C C C C C C C C C Mode FRONT L/R CENTER SURROUND L/R SURROUND BACK L/R SUB- WOOFER E E B B B B.
60 ENGLISH Relationship between the video input signal and monitor output according to the VIDEO INPUT MODE settings VIDEO INPUT Mode Input signals COMPONENT S-VIDEO VIDEO COMPONENT S-VIDEO VIDEO MONI.
61 ENGLISH 18 SPECIFICA TIONS 2 Audio section • Power amplifier Rated output: Front: 100 W + 100 W (8 Ω /ohms, 20 Hz ~ 20 kHz with 0.05% T .H.D.) 135 W + 135 W (6 Ω /ohms, 1 kHz with 0.7% T .H.D.) Center: 100 W (8 Ω /ohms, 20 Hz ~ 20 kHz with 0.
16-11, YUSHIMA 3-CHOME, BUNKYO-KU, TOKYO 113-0034, JAP AN T elephone: (03) 3837-5321 Printed in Japan 511 4212 006.
Un punto importante, dopo l’acquisto del dispositivo (o anche prima di acquisto) è quello di leggere il manuale. Dobbiamo farlo per diversi motivi semplici:
Se non hai ancora comprato il Denon AVR-2805 è un buon momento per familiarizzare con i dati di base del prodotto. Prime consultare le pagine iniziali del manuale d’uso, che si trova al di sopra. Dovresti trovare lì i dati tecnici più importanti del Denon AVR-2805 - in questo modo è possibile verificare se l’apparecchio soddisfa le tue esigenze. Esplorando le pagine segenti del manuali d’uso Denon AVR-2805 imparerai tutte le caratteristiche del prodotto e le informazioni sul suo funzionamento. Le informazioni sul Denon AVR-2805 ti aiuteranno sicuramente a prendere una decisione relativa all’acquisto.
In una situazione in cui hai già il Denon AVR-2805, ma non hai ancora letto il manuale d’uso, dovresti farlo per le ragioni sopra descritte. Saprai quindi se hai correttamente usato le funzioni disponibili, e se hai commesso errori che possono ridurre la durata di vita del Denon AVR-2805.
Tuttavia, uno dei ruoli più importanti per l’utente svolti dal manuale d’uso è quello di aiutare a risolvere i problemi con il Denon AVR-2805. Quasi sempre, ci troverai Troubleshooting, cioè i guasti più frequenti e malfunzionamenti del dispositivo Denon AVR-2805 insieme con le istruzioni su come risolverli. Anche se non si riesci a risolvere il problema, il manuale d’uso ti mostrerà il percorso di ulteriori procedimenti – il contatto con il centro servizio clienti o il servizio più vicino.
