Manuale d’uso / di manutenzione del prodotto CS150U48V3 del fabbricante CyberPower
Vai alla pagina of 18
CS150U48V3 Installation & Operation Manual K01-1504801-00.
© 2010 CyberPower Systems (USA), Inc. All Trademarks are property of their owners. Page: 1 of 17 TABLE OF CONTENTS 1 Product introduction .............................................................................................................. 3 1.
© 2010 CyberPower Systems (USA), Inc. All Trademarks are property of their owners. Page: 2 of 17 TABLE OF TABLES Table 1: Battery Heater Specifications .............................................................................................. 11 Table 2: Block Diagram Descriptions .
© 2010 CyberPower Systems (USA), Inc. All Trademarks are property of their owners. Page: 3 of 17 1 PRODUCT INTRODUCTION 1.1 General Description The CS150U48V3 battery backup unit is designed to serve up to two MDU ONTs (Optical Network Terminal for Multi-Dwelling Use) and can be installed indoors or outdoors.
© 2010 CyberPower Systems (USA), Inc. All Trademarks are property of their owners. Page: 4 of 17 2.2 Battery Warnings • Danger of explosion if battery is incorrectly connected or replaced. • Worn-out or damaged batteries are considered environmentally unsafe.
© 2010 CyberPower Systems (USA), Inc. All Trademarks are property of their owners. Page: 5 of 17 2.4 FCC Notice This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules.
© 2010 CyberPower Systems (USA), Inc. All Trademarks are property of their owners. Page: 6 of 17 Figure 1: Dimensions (Front View) Figure 2: Dimensions (Side View) 3 DIMENSIONS 17.14 inch (435.4 mm) 7.09 inch (180.1 mm) 5.79 inch (147.1 mm) 15.75 inch (400.
© 2010 CyberPower Systems (USA), Inc. All Trademarks are property of their owners. Page: 7 of 17 Figure 3: Unit Overview (Front) Figure 4: Unit Overview (Rear) Figure 5: Unit Overview (Side) Figure 6: Unit Overview (Bottom) 4 INSTALLATION 4.1 Overview 1.
© 2010 CyberPower Systems (USA), Inc. All Trademarks are property of their owners. Page: 8 of 17 4.2 Unpacking Inspect the Battery Backup Unit upon receipt.
© 2010 CyberPower Systems (USA), Inc. All Trademarks are property of their owners. Page: 9 of 17 4.4 Installation 4.4.1 Wall Mounting the UPS 1. Remove the UPS from the carton.
© 2010 CyberPower Systems (USA), Inc. All Trademarks are property of their owners. Page: 10 of 17 Figure 10: Battery Wiring Secure harness with cable ties Battery Type The battery is a standard sealed lead acid battery rated at 12Vdc / 7.2 (7) Ah. When required, the battery may be replaced with an approved 12Vdc / 7.
© 2010 CyberPower Systems (USA), Inc. All Trademarks are property of their owners. Page: 11 of 17 4.7 Connecting to Power Source 4.7.1 Installing the Power Cord 1. Remove the 4 terminal strip cover screws (upper left hand corner) 2. Remove any convenient 3/4” knock-out of the UPS enclosure.
© 2010 CyberPower Systems (USA), Inc. All Trademarks are property of their owners. Page: 12 of 17 Wire Gauge (AWG) Wire Type Tightening Torque (lb-in) Minimum temperature rating of conductors Copper conductors 7 75°C 10-18 AWG Copper Conductors Table 3: AC Line Cord Table 4: Conduit Wires 4.
4.8 ONT Alarm Connections 1. Route the 7-wire cable back from the ONT enclosure to the UPS. 2. Remove any convenient 3/4” knock-out of the UPS enclosure. 3. Install a strain relief in the knock-out hole. 4. Route the power cable up through the strain relief.
© 2010 CyberPower Systems (USA), Inc. All Trademarks are property of their owners. Page: 14 of 17 Table 5: Controls and LED Indicators Indicator Alarm Silence Button Cold Start Button AC/DC Mode LED .
© 2010 CyberPower Systems (USA), Inc. All Trademarks are property of their owners. Page: 15 of 17 Table 6: Alarms 5.3 Alarms There are audible and visual alarm signals to alert the customer to abnormal and/or service affecting conditions present in the UPS.
© 2010 CyberPower Systems (USA), Inc. All Trademarks are property of their owners. Page: 16 of 17 Table 7: Specifications 6 SPECIFICATIONS Model Number CS150U48V3 Input: Rating V oltage/Frequency 100 - 240V / 50 - 60Hz Input V oltage Range 90 - 264V ac Frequency Range 47 - 63Hz P .
© 2010 CyberPower Systems (USA), Inc. All Trademarks are property of their owners. Page: 17 of 17 APPENDIX I - Wall Mount Chart Recommended Screw Dimensions M8 x 25L or 3/8” x 1”L 7.
Un punto importante, dopo l’acquisto del dispositivo (o anche prima di acquisto) è quello di leggere il manuale. Dobbiamo farlo per diversi motivi semplici:
Se non hai ancora comprato il CyberPower CS150U48V3 è un buon momento per familiarizzare con i dati di base del prodotto. Prime consultare le pagine iniziali del manuale d’uso, che si trova al di sopra. Dovresti trovare lì i dati tecnici più importanti del CyberPower CS150U48V3 - in questo modo è possibile verificare se l’apparecchio soddisfa le tue esigenze. Esplorando le pagine segenti del manuali d’uso CyberPower CS150U48V3 imparerai tutte le caratteristiche del prodotto e le informazioni sul suo funzionamento. Le informazioni sul CyberPower CS150U48V3 ti aiuteranno sicuramente a prendere una decisione relativa all’acquisto.
In una situazione in cui hai già il CyberPower CS150U48V3, ma non hai ancora letto il manuale d’uso, dovresti farlo per le ragioni sopra descritte. Saprai quindi se hai correttamente usato le funzioni disponibili, e se hai commesso errori che possono ridurre la durata di vita del CyberPower CS150U48V3.
Tuttavia, uno dei ruoli più importanti per l’utente svolti dal manuale d’uso è quello di aiutare a risolvere i problemi con il CyberPower CS150U48V3. Quasi sempre, ci troverai Troubleshooting, cioè i guasti più frequenti e malfunzionamenti del dispositivo CyberPower CS150U48V3 insieme con le istruzioni su come risolverli. Anche se non si riesci a risolvere il problema, il manuale d’uso ti mostrerà il percorso di ulteriori procedimenti – il contatto con il centro servizio clienti o il servizio più vicino.
