Manuale d’uso / di manutenzione del prodotto G1978B del fabbricante Agilent Technologies
Vai alla pagina of 44
Agilent T echnologies Agilent G1978B Multimode Source for 6100 Series Single Quad LC/MS Set-Up Guide.
2 Multimode Source for 6100 Series Singl e Quad LC/MS Set-U p Guide Notices © Agilent T echnologies, Inc. 2008 N o p a rt o f t h i s m a n u a l m a y be r e p r o d u c e d i n any form or by any m.
Multimode Source for 6100 Series Single Quad LC/MS Set-Up Guide 3 In This Guide This guide explains how to install, maint ain and troubleshoot your nanoelectospray ion sour ce. 1 Installation Thi s c ha pte r tel ls y ou ho w to i ns tall the mul ti mod e i on so ur ce .
4 Multimode Source for 6100 Series Singl e Quad LC/MS Set-U p Guide.
Multimode Source for 6100 Series Single Quad LC/MS Set-Up Guide 5 Content 1 Installation 7 Installation 8 Step 1. Prepare to install 8 Step 2. Install the HV control PCA and cables 9 Changing Sources .
6 Multimode Source for 6100 Series Singl e Quad LC/MS Set-U p Guide Contents.
7 Agilent G1978B Multimode Source fo r 6100 Series Single Quad LC/MS Set-Up Guide Agilent T echnologies 1 Installation Installation 8 Step 1. Prepare to install 8 Step 2.
8 Multimode Source for 6100 Series Singl e Quad LC/MS Set-U p Guide 1 Installation Installation Installation This section explains ho w t o insta ll t he G1978B multimode source on a 6100 Series Single Quad LC/MS instrument. The G1978A multimode source is not suppor ted on these instr uments.
Multimode Source for 6100 Series Single Quad LC/MS Set-Up Guide 9 Installation 1 Step 2. Install the HV control PCA and cables • V alv e BD-APCI supply , p/nG1960-60802 • V alv e BD-APCI Needle Interlock, p/n G1960-60856 Figure 2 From left to right: G1946-80058, G1960-60802 and G1960-60856 Step 2.
10 Multimode Source for 6100 Series Single Quad LC/MS Set-Up Guide 1 Installation Step 2. Install the HV control PCA and cables Figure 4 Connecting th e valve PCA to the multimode HV p ower supply . 6 Install t he APCI HV po wer suppl y. The APCI HV po wer supply is located at the e nd of the A UX Mo du le.
Multimode Source for 6100 Series S i ngle Quad LC/MS Set-Up Guide 11 Installation 1 Step 2. Install the HV control PCA and cables Figure 6 Connecting the V cap and V chamber cables to the powe r supply . 9 Connect the long ribbon cable, p/n G1960-60802, from the APCI HV po w er sup ply to the va lv e PC A.
12 Multimode Source for 6100 Series Single Quad LC/MS Set-Up Guide 1 Installation Step 2. Install the HV control PCA and cables Figure 9 Connecting the HV PCA to the chassis. 12 Close t he A UX Module cover and reconnect all cables. 13 Inst all the multimo de source to t he system and c onnect all connectors.
Multimode Source for 6100 Series S i ngle Quad LC/MS Set-Up Guide 13 Installation 1 Changing Sources Changing Sources T o remove the multimode source Do the follo wing ste ps to remov e the m ultimode source. 1 Set the source temperatures f or vaporizer heater and dr ying gas heater t o minimum values to cool the source.
14 Multimode Source for 6100 Series Single Quad LC/MS Set-Up Guide 1 Installation To convert from multimode to ESI, APCI or APPI 10 Place the source sh ipping co ver on the source.
Multimode Source for 6100 Series S i ngle Quad LC/MS Set-Up Guide 15 Installation 1 To convert from ES I, APCI or APPI to the multimode source T o convert from ESI, APCI or APPI to the multimode source 1 Swi tch to the MSD T une view . 2 Select Instr ument/Set Spray Chamber and set all gas f l o ws and tem pera tur es to 0 .
16 Multimode Source for 6100 Series Single Quad LC/MS Set-Up Guide 1 Installation To convert from ESI, APCI or APPI to the multimode source Figure 11 Standard spray shiel d and capillary cap for ESI or A PCI 10 Remov e the capillar y cap. If need ed, moisten a clean clot h with isopropyl alcohol and wipe the capillar y cap.
Multimode Source for 6100 Series S i ngle Quad LC/MS Set-Up Guide 17 Installation 1 To convert from ES I, APCI or APPI to the multimode source Figure 13 Multimode spray shield 13 Screw the multimo de spray shield into the holder for the spra y shield.
18 Multimode Source for 6100 Series Single Quad LC/MS Set-Up Guide 1 Installation To convert from ESI, APCI or APPI to the multimode source Figure 15 Multimode Spray Cha mber 15 Inst all the spray chamber on the spray chamber mount. Figure 16 Multimode source with I-Button 16 Install t he nebulizer on t he mu ltimode source spra y chamber .
Multimode Source for 6100 Series S i ngle Quad LC/MS Set-Up Guide 19 Installation 1 To convert from ES I, APCI or APPI to the multimode source Figure 17 No nebulizer on top of the multimode source 17 Connect the 1/8-inch nebulizer gas tu bing from the LC/MS mainframe to the nebulizer gas f itting.
20 Multimode Source for 6100 Series Single Quad LC/MS Set-Up Guide 1 Installation To convert from ESI, APCI or APPI to the multimode source 18 Connect the LC/MS sample tubing to the LC/MS divert er valv e inlet filter .
21 Agilent G1978B Multimode Source fo r 6100 Series Single Quad LC/MS Set-Up Guide Agilent T echnologies 2 V erification T o verify sensitivity for 6120 Qu ad - G1978B Multimode, Positiv e SIM Modes 2.
22 Multimode Source for 6100 Series Single Quad LC/MS Set-Up Guide 2 Verification To verify sensitivity for 6120 Quad - G1978B Multimode, Positive SIM Modes T o verify sensitivity for 6120 Quad - G1978B Multimode, Positive SIM Modes Preparation 1 Transfer 1 mL of 5 ng/µL reserpine (A gilent G2423A) to a 50 mL v olumetric f lask.
Multimode Source for 6100 Series S i ngle Quad LC/MS Set-Up Guide 23 Verification 2 To verify sensitivity for 6120 Quad - G1978B Multimode, Positive SIM Modes Sensitivity V erification for Mult imode in ESI Positive SIM Mode 1 Star t up t he ChemSt ation software.
24 Multimode Source for 6100 Series Single Quad LC/MS Set-Up Guide 2 Verification To verify sensitivity for 613 0 and 6140 Quads - G1978B Mu ltimode, Positive SIM Modes When the meth od is finished, a repor t prints showing the signal-t o-noise ratio f or the five blank and five sample peaks, and a blank-subtracted average of the sample peaks.
Multimode Source for 6100 Series S i ngle Quad LC/MS Set-Up Guide 25 Verification 2 To verify sensitivity for 6130 and 6140 Quad s - G1978B Multimode, Positive SIM Modes Sensitivity V erification for Multim ode in ESI, Positive SIM Mode 1 Star t up t he ChemSt ation software.
26 Multimode Source for 6100 Series Single Quad LC/MS Set-Up Guide 2 Verification To verify sensitivity for 613 0 and 6140 Quads - G1978B Mu ltimode, Positive SIM Modes experiments t o achieve maxi mum instrument sensitivity 7 Review the results.
Multimode Source for 6100 Series S i ngle Quad LC/MS Set-Up Guide 27 Verification 2 To verify sensitivity for 6130 and 6140 Quad s - G1978B Multimode, Positive Scan Modes T o verify sensitivity for 61.
28 Multimode Source for 6100 Series Single Quad LC/MS Set-Up Guide 2 Verification To verify sensitivity for 613 0 and 6140 Quads - G1978B Mu ltimode, Positive Scan Modes Sensitivity V erification for Multim ode in ESI, Posi tive Scan Mode 1 Star t the ChemSt ation software.
Multimode Source for 6100 Series S i ngle Quad LC/MS Set-Up Guide 29 Verification 2 To verify sensitivity for 6130 and 6140 Quad s - G1978B Multimode, Positive Scan Modes When the me thod is f inished.
30 Multimode Source for 6100 Series Single Quad LC/MS Set-Up Guide 2 Verification To verify sensitivity for the G1 978B Multimode using Multiple FIA method in Mixed Mode operation T o verify sensitivity for the G1978B Multimode using Multiple FIA method in Mixed Mode operation Preparation 1 Do an autotune if necessar y.
Multimode Source for 6100 Series S i ngle Quad LC/MS Set-Up Guide 31 Verification 2 To verify sensitivity for the G1 978B Multimode using Multiple FIA method in Mixed Mode operation d Click OK . 8 Repeat f or the MMCheckSL _CI.M data f ile. Use the same subdirector y and change Dat a File to Multi_CI .
32 Multimode Source for 6100 Series Single Quad LC/MS Set-Up Guide 2 Verification To do an autotune T o do an autotune Tuning t he multimode source is done in MM-APCI mode only. A utotune is done from the same menu as with all sources. • Fr om the MSD Tune view , select Instrument > Autotune menu it em.
Multimode Source for 6100 Series S i ngle Quad LC/MS Set-Up Guide 33 Verification 2 Example of multimode verification report Example of multimode verification report.
34 Multimode Source for 6100 Series Single Quad LC/MS Set-Up Guide 2 Verification Example of multimode verification report.
35 Agilent G1978B Multimode Source fo r 6100 Series Single Quad LC/MS Set-Up Guide Agilent T echnologies 3 Methods T o setup a method to use the multimode source 36 T o create a method for positive/ne.
36 Multimode Source for 6100 Series Single Quad LC/MS Set-Up Guide 3M e t h o d s To setup a method to use the multimode source T o setup a method to use the multimode source T o ha ve y our method us.
Multimode Source for 6100 Series S i ngle Quad LC/MS Set-Up Guide 37 Methods 3 To create a method for posit ive/negative mixed mode opera tion T o create a method for positive/negative mixed mode operation 1 Open the MSD Spray Chamber dialog bo x by clicking the Instr ument > Set Up M SD S ig na ls in the Met hod and Run Control vie w .
38 Multimode Source for 6100 Series Single Quad LC/MS Set-Up Guide 3M e t h o d s To create a method for posit ive/negative mixed mode op eration Figure 21 Positive/Negativ e polarity switching using .
Multimode Source for 6100 Series S i ngle Quad LC/MS Set-Up Guide 39 Methods 3 To create a method for alternating ESI and APCI operation T o create a method for alternating ESI and APCI operation 1 Open The MSD Spray Chamber dialog bo x by clicking Instrument > MSD Spray Chamber in the Method and Run Control view .
40 Multimode Source for 6100 Series Single Quad LC/MS Set-Up Guide 3M e t h o d s To create a method for altern ating ESI and APCI operation 9 Click the OK button.
Multimode Source for 6100 Series S i ngle Quad LC/MS Set-Up Guide 41 Index Index A autotune , 32 C converting from ESI, APCI or AP PI , 15 converting to E SI or APCI , 14 D diverter valv e inlet filte.
42 Multimode Source for 6100 Series Single Quad LC/MS Set-Up Guide Index.
.
© Agilent T echnologi es, Inc. 2008 Printed in USA First Editio n, December 20 08 *G1978-90070* G1978-90070 www .agilent.com Agilent T echnologies In This Book This book contains installation, operation, maintenance and troubleshooting instruction fo r the Multimode Source fo r 6100 Series Single Quad LC/MS.
Un punto importante, dopo l’acquisto del dispositivo (o anche prima di acquisto) è quello di leggere il manuale. Dobbiamo farlo per diversi motivi semplici:
Se non hai ancora comprato il Agilent Technologies G1978B è un buon momento per familiarizzare con i dati di base del prodotto. Prime consultare le pagine iniziali del manuale d’uso, che si trova al di sopra. Dovresti trovare lì i dati tecnici più importanti del Agilent Technologies G1978B - in questo modo è possibile verificare se l’apparecchio soddisfa le tue esigenze. Esplorando le pagine segenti del manuali d’uso Agilent Technologies G1978B imparerai tutte le caratteristiche del prodotto e le informazioni sul suo funzionamento. Le informazioni sul Agilent Technologies G1978B ti aiuteranno sicuramente a prendere una decisione relativa all’acquisto.
In una situazione in cui hai già il Agilent Technologies G1978B, ma non hai ancora letto il manuale d’uso, dovresti farlo per le ragioni sopra descritte. Saprai quindi se hai correttamente usato le funzioni disponibili, e se hai commesso errori che possono ridurre la durata di vita del Agilent Technologies G1978B.
Tuttavia, uno dei ruoli più importanti per l’utente svolti dal manuale d’uso è quello di aiutare a risolvere i problemi con il Agilent Technologies G1978B. Quasi sempre, ci troverai Troubleshooting, cioè i guasti più frequenti e malfunzionamenti del dispositivo Agilent Technologies G1978B insieme con le istruzioni su come risolverli. Anche se non si riesci a risolvere il problema, il manuale d’uso ti mostrerà il percorso di ulteriori procedimenti – il contatto con il centro servizio clienti o il servizio più vicino.
