Manuale d’uso / di manutenzione del prodotto 706.59668 del fabbricante Craftsman
Vai alla pagina of 18
706.596680 706.596690 6-Drawer Chest 7-Drawer Roll-A-Way Owners Manual Craftsman 7-Drawer AXS TM Roll-Away Craftsman 6-Drawer AXS TM Chest Section 1612 1613 1614 1615 1616 1617 1618 1623 1624 1625 Des.
i CRAFTSMAN°i CHEST TOP AND FACIA PARTS REPLACEMENT S Facia Chest Top with light Information Center CHEST TOP INSTALLATION AND REMOVAL (With task light) Tools Required: 3/8" Wrench Chest Top Removal • Disconnect power from unit. • Remove enough drawers to reach the top back inside of the unit.
INFORMATION CENTER INSTALLATION AND REMOVAL Tools Required: Screwdriver, Crosstip Tape Removal • Disconnect power from the unit. • Remove enough drawers to reach the retaining screw under the information center. (See removing and installing drawers.
CONNECTING POWER • Ensure that the unit and power cord are clean and dry. • insert the round end of the power cord connector into the jack in the back of the unit. • Plug the cord into an appropriate electrical outlet. Fuse block Jack Cord REMOVING AND INSTALLING DRAWERS: • Empty the drawer.
I CRAFTSMAN°I DRAWER AND WORK SURFACE PARTS REPLACEMENT SLIDE REPLACEMENT Tools Required: Drill 5/32" Drill bit Rivet gun Removal • Remove drawer or work surface from unit. (See drawer and work surface installation and removal.) • Carefully drill out rivet holding slide drawer member to drawer or work surface.
DRAWER AND WORK SURFACE REPLACEMENT DRAWER FRONT INSTALLATION AND REMOVAL Tools Required: Drill 5/32" Drill bit Rivet gun Crosstip screwdriver Removal • Remove drawer or work surface from unit. (See Drawer and Work surface installation and removal.
DRAWER AND WORK SURFACE INSTALLATION AND REMOVAL Note: For pull out work surface without task light, follow drawer removal instructions. DRAWER • Empty the drawer. • Fully extend the drawer. Release Lever Style - Lift or lower (depending on the slide) the release lever on both sides, (this allows the slides to ride over the stops.
I CRAFTSMAN°I BOTTOM REPLACEMENT Tools Required: Socket Wrench 5/16" Socket Removal • Disconnect power from the unit. • Remove contents from drawers. • Carefully lay the chest on its back. Take care to prevent scratches or damage to the unit.
I CRAFTSMAN°I TOP, WIRING HARNESS, HARNESS GROMMET Parts Replacement Roll-away top WIRING HARNESS REPLACEMENT HARNESS GROMMET REPLACEMENT Tools Required: 3/8" Wrench WIRING HARNESS AND HARNESS GROMMET REMOVAL • Disconnect power from unit. • Remove pull out work surface and enough drawers to reach the top back inside of the unit.
TOP INSTALLATION AND REMOVAL Tools Required: Screwdriver, Crosstip Roll-away top removal • Disconnect power from unit. • Remove pull out work surface. (See drawer and work surface installation and removal.) • Remove enough drawers to reach the top back inside of the unit.
I CRAFTSMAN°I CHEST TOP WITHOUT TASK LIGHT Tools Required: Screwdriver, Crosstip Chest top removal • Disconnect power from unit. • Remove pull out work surface. (See drawer installation and removal.) • Remove enough drawers to reach the top back inside of the unit.
I CRAFTSMAN°I TASK LIGHT REPLACEMENT Tools Required: Screwdriver, Crosstip Removal • Disconnect power from the unit. • Fully extend task light assembly. • Make note of light orientation. • Remove (6) mounting screws to remove light. • Unplug light.
I CRAFTSMAN°I LOCKING SYSTEM Parts Replacement Actuator Channel Actuator Rod Bracket ACTUATOR ROD AND ACTUATOR CHANNEL REPLACEMENT ACTUATOR ROD AND ACTUATOR CHANNEL REMOVAL • Disconnect power from the unit. • Remove work surface (Roll-away only).
ACTUATOR ROD BRACKET INSTALLATION AND REMOVAL Removal • Disconnect power from unit. • For roll-aways, remove work surface. (See drawer and work surface installation and removal. • Remove enough drawers to reach the top back inside of the unit. (See Drawer and Work surface installation and removal.
CHEST TOP INSTALLATION AND REMOVAL (With task light) Tools Required: 3/8" Wrench Chest Top Removal • Disconnect power from unit. • Remove enough drawers to reach the top back inside of the unit. (See Drawer installation and removal.) • Push actuator rod to back of unit to disconnect from back of lock.
I CRAFTSMAN°I LOCK REPLACEMENT Removal • Disconnect power from unit. • For roll-aways, remove work surface. (See drawer and work surface installation and removal • Remove enough drawers to reach the lock retaining clip behind the lock. • Remove lock retaining clip.
I CRRFT.TMRN°J STRIKER REPLACEMENT Tools Required: Screwdriver Removal • Remove drawer from unit. • Turn drawer upside down. • Depress (2) detents. Push striker in to remove. Depress detents Drawer installation and removal • Emptythe drawer. • Fully extend the drawer.
I CRAFTSMAN°I DRAWER FRONT REPLACEMENT Tools Required: Crosstip screwdriver Removal • Remove retaining screw(s). • Slide drawer front assembly as indicated to unhook mounting tabs. • Pull out to remove. Installation • Position drawer front on drawer assembly.
Un punto importante, dopo l’acquisto del dispositivo (o anche prima di acquisto) è quello di leggere il manuale. Dobbiamo farlo per diversi motivi semplici:
Se non hai ancora comprato il Craftsman 706.59668 è un buon momento per familiarizzare con i dati di base del prodotto. Prime consultare le pagine iniziali del manuale d’uso, che si trova al di sopra. Dovresti trovare lì i dati tecnici più importanti del Craftsman 706.59668 - in questo modo è possibile verificare se l’apparecchio soddisfa le tue esigenze. Esplorando le pagine segenti del manuali d’uso Craftsman 706.59668 imparerai tutte le caratteristiche del prodotto e le informazioni sul suo funzionamento. Le informazioni sul Craftsman 706.59668 ti aiuteranno sicuramente a prendere una decisione relativa all’acquisto.
In una situazione in cui hai già il Craftsman 706.59668, ma non hai ancora letto il manuale d’uso, dovresti farlo per le ragioni sopra descritte. Saprai quindi se hai correttamente usato le funzioni disponibili, e se hai commesso errori che possono ridurre la durata di vita del Craftsman 706.59668.
Tuttavia, uno dei ruoli più importanti per l’utente svolti dal manuale d’uso è quello di aiutare a risolvere i problemi con il Craftsman 706.59668. Quasi sempre, ci troverai Troubleshooting, cioè i guasti più frequenti e malfunzionamenti del dispositivo Craftsman 706.59668 insieme con le istruzioni su come risolverli. Anche se non si riesci a risolvere il problema, il manuale d’uso ti mostrerà il percorso di ulteriori procedimenti – il contatto con il centro servizio clienti o il servizio più vicino.