Manuale d’uso / di manutenzione del prodotto WSUPOE12VPSPL del fabbricante Cisco Systems
Vai alla pagina of 152
Americas Hea dquarters Cisc o Syst ems , Inc . 170 West Ta sman Driv e San Jos e, CA 95 134-1706 USA http://www.ci sco.com Tel: 408 526-4000 800 553- NETS (638 7) Fax: 408 527-0883 Catalyst 450 0 E-Se.
THE SPECIFICATIONS AND INFORMATION REGARDING TH E PRODUCTS IN THIS MANUAL ARE SUBJE CT TO CHANGE WITHOUT NO TICE. ALL STATEMENT S, INFORMATI ON, AND RE COMMENDATIONS IN T HIS MA NUAL ARE BELI EVED TO BE ACCURATE BUT ARE P RESENTED WITHOUT WARRANTY OF ANY KIND, EXPRE SS OR IMPLIED.
iii Catalyst 4500 E-S eries Switche s Installation Gui de OL-13972-01 CONTENTS Preface vii Audienc e vii Organi zation vii Relat ed D ocum ent atio n viii Conv enti ons viii Obtain ing Docu mentat ion.
Cont ent s iv Catalyst 4500 E-Se ries Switches Installatio n Guide OL-13972-01 Management Flow 1-35 Switc hin g Traf fic Fl ow 1-36 CHAPTER 2 Prepari ng for Instal lation 2-1 Elect rosta tic Disc harg.
Cont ents v Catalyst 4500 E-S eries Switche s Installation Gui de OL-13972-01 Verify ing th e In stalla tion 4-15 Replac ing Bac kplane Mo dules 4-15 Verif y the New Modul es 4-18 Supervi sor Memory U.
Cont ent s vi Catalyst 4500 E-Se ries Switches Installatio n Guide OL-13972-01 Boot Pr oble ms 5-17 Contact ing t he Cisco Tec hnical As sist ance Cente r 5-18 Serial Numbers 5-19 APPENDI X A Specifi .
vii Catalyst 4500 E-S eries Switche s Installation Gui de OL-13972-01 Preface Th i s p r ef ace de s c r i be s t he a udi en ce, or ga ni zat i on, a nd c onve nt i ons of t he Ca t al ys t 45 00 E- .
viii Catalyst 4500 E-Se ries Switches Installatio n Guide OL-13972-01 Prefac e Related Document ation Related Documentation Re f er t o t he fo l l ow i ng do c um e nt s fo r a ddi t i ona l Ca t al ys t 4500 se r i es a nd Ca t al ys t 4500 E- se r i es i nf or ma t i on: • Catalyst 4500 Se ries Mod ule In stallati on Guide at http:// www .
ix Catalyst 4500 E-S eries Switche s Installation Gui de OL-13972-01 Pre face Convent ions No t es us e t he f ol l ow i ng c onve nt i ons : Note Means r eader ta ke no te . Notes co ntain helpful suggestions or reference s to material not co vered in the publica tion.
x Catalyst 4500 E-Se ries Switches Installatio n Guide OL-13972-01 Prefac e Conv ent io ns W arnings use the fol lowing con ventions: War ni n g IMPORT ANT SAFE TY INSTRUC TIONS This warning symbol means danger . Y ou are in a si tuation that could cause bodily inj ury .
xi Catalyst 4500 E-S eries Switche s Installation Gui de OL-13972-01 Pre face Convent ions Avvertenza IMPOR T ANTI ISTRUZ IONI SUL LA SICUREZ ZA Questo simbolo di avvertenza indica un pericolo.
xii Catalyst 4500 E-Se ries Switches Installatio n Guide OL-13972-01 Prefac e Conv ent io ns.
xiii Catalyst 4500 E-S eries Switche s Installation Gui de OL-13972-01 Pre face Convent ions Avi s o INSTR UÇÕES IM PORT ANTES DE SEGU RANÇA Este símbolo de aviso signi fica perigo. Você se encontra em uma situação em que há risco de lesões corporais.
xiv Catalyst 4500 E-Se ries Switches Installatio n Guide OL-13972-01 Prefac e Conv ent io ns.
xv Catalyst 4500 E-S eries Switche s Installation Gui de OL-13972-01 Pre face Obtaining Documentation and Submitting a Service Request Obtaining Do cumentation an d Submitting a Service Reque st For i.
xvi Catalyst 4500 E-Se ries Switches Installatio n Guide OL-13972-01 Prefac e Obtainin g Docume ntation and Submitt ing a Service Requ est.
CH A P T E R 1-1 Catalyst 4500 E-Se ries Switches Installatio n Guide OL-13972-01 1 Product Overview This ch apter pr ov ides an o v ervi ew of the feat ures an d compo nents of the Catalys t 4500 E-ser ies switch es.
1-2 Catalyst 4500 E-Se ries Switches Installatio n Guide OL-13972-01 Chapter 1 Produc t Overview Switch F eatures A more deta iled di scussion of power r edundancy is in the En vir onmenta l Monito ring and P ower Management chapt er of the sof tware co nfiguration gu ide.
1-3 Catalyst 4500 E-Se ries Switches Installatio n Guide OL-13972-01 Chapter 1 Product Overv iew Switch Fe atures Ta b l e 1-1 desc ribe s th e fe atu res o f th e C atal yst 4503 -E swi tch.
1-4 Catalyst 4500 E-Se ries Switches Installatio n Guide OL-13972-01 Chapter 1 Produc t Overview Switch F eatures Switchi ng module suppo rt (c ontinued) • 48-port 100BASE-X Fast Ethe rnet sw itching modul e (WS-X4248-FE-SFP) • 24-port IEEE 802.3af -compli ant PoE 1 0/100BASE-TX sw itching m odule (WS-X42 24-RJ45V) • 48-port IEEE 802.
1-5 Catalyst 4500 E-Se ries Switches Installatio n Guide OL-13972-01 Chapter 1 Product Overv iew Switch Fe atures Catalys t 4506 -E Switch Featu res The Ca talys t 4506-E switch (see Figure 1-2 ) is a six-slo t switch designe d for high- perfo rman ce high-de nsity wir ing clos et appl ications.
1-6 Catalyst 4500 E-Se ries Switches Installatio n Guide OL-13972-01 Chapter 1 Produc t Overview Switch F eatures Ta b l e 1-2 describes th e featu res of the Ca talyst 4506 -E switch .
1-7 Catalyst 4500 E-Se ries Switches Installatio n Guide OL-13972-01 Chapter 1 Product Overv iew Switch Fe atures Switchi ng module suppo rt (c ontinued) • 48-port 10 /100-Mb ps Fast Ethernet switc hing modul e (WS-X4148-RJ2 1) • 24-port IEEE 802.
1-8 Catalyst 4500 E-Se ries Switches Installatio n Guide OL-13972-01 Chapter 1 Produc t Overview Switch F eatures Supervisor E ngine R edundan cy The Catal yst 4507R- E and Cata lyst 4510R -E switches supp ort superv isor engi ne redund ancy . Redunda ncy allows a second supervis or engine to take ov er if the active supervisor engine fails.
1-9 Catalyst 4500 E-Se ries Switches Installatio n Guide OL-13972-01 Chapter 1 Product Overv iew Switch Fe atures Catalys t 4507 R-E Switc h Featu res The Ca talys t 4507R- E switch (see Figure 1-3 ) is a sev en-slot switch de signed for high-per formanc e high-de nsity wir ing clos et appl ications.
1-10 Catalyst 4500 E-Se ries Switches Installatio n Guide OL-13972-01 Chapter 1 Produc t Overview Switch F eatures Ta b l e 1-3 describes th e featu res of the Ca talyst 4507 R-E swit ch.
1-11 Catalyst 4500 E-Se ries Switches Installatio n Guide OL-13972-01 Chapter 1 Product Overv iew Switch Fe atures Switchi ng module suppo rt • 32-port 10/100- Mbps Fast E thern et plus 2 -port Giga.
1-12 Catalyst 4500 E-Se ries Switches Installatio n Guide OL-13972-01 Chapter 1 Produc t Overview Switch F eatures Switchi ng module suppo rt (c ontinued) • 24-port IEEE 802.3af- comp liant PoE 10/1 00B ASE-TX switch ing mod ule (WS-X422 4-RJ45V) • 48-port IEEE 802.
1-13 Catalyst 4500 E-Se ries Switches Installatio n Guide OL-13972-01 Chapter 1 Product Overv iew Switch Fe atures Catalys t 4510 R-E Switc h Featu res The Ca talys t 4510R- E switch (see Figure 1-4 ) is a ten-slo t switch designe d for high -perfo rmanc e high-de nsity wir ing clos et appl ications.
1-14 Catalyst 4500 E-Se ries Switches Installatio n Guide OL-13972-01 Chapter 1 Produc t Overview Switch F eatures for a maxi mum of 384 po rts and 4 uplinks. With a Supervisor Engine 6-E, slots 8 to 10 provide 6 Gbps per slo t and a ll othe r slots provide 24 Gbps per slot.
1-15 Catalyst 4500 E-Se ries Switches Installatio n Guide OL-13972-01 Chapter 1 Product Overv iew Switch Fe atures Switchi ng module suppo rt • 24-port 10/100BASE-TX Fa st Ether net swi tching m odu.
1-16 Catalyst 4500 E-Se ries Switches Installatio n Guide OL-13972-01 Chapter 1 Produc t Overview Supervisor E ngines Supervisor Engines The fol lo wing s uperv isor engi nes are av ailable for the Ca.
1-17 Catalyst 4500 E-Se ries Switches Installatio n Guide OL-13972-01 Chapter 1 Product Overv iew Superv isor Engi nes • Supervi sor En gine I V (WS-X 4515) ( Fig ure 1- 8 ) • Supervi sor Engine V.
1-18 Catalyst 4500 E-Se ries Switches Installatio n Guide OL-13972-01 Chapter 1 Produc t Overview Supervisor E ngines T o insta ll the sup ervisor e ngine, ref er to the proced ure in th e Catalyst 4500 Serie s Module Installat ion Guide . The various supervi sor engine models ar e shown in Figure 1-5 to Figure 1-1 0 .
1-19 Catalyst 4500 E-Se ries Switches Installatio n Guide OL-13972-01 Chapter 1 Product Overv iew Superv isor Engi nes Figur e 1 -6 Catalyst 45 0 0 Ser ie s Superviso r Engine I I-Plus TS (WS-X40 13+T.
1-20 Catalyst 4500 E-Se ries Switches Installatio n Guide OL-13972-01 Chapter 1 Produc t Overview Supervisor E ngines Figur e 1 -8 Supervisor E ngine IV (WS-X4515 ) Figur e 1 -9 Supervisor Engine V (W.
1-21 Catalyst 4500 E-Se ries Switches Installatio n Guide OL-13972-01 Chapter 1 Product Overv iew Superv isor Engi nes Figur e 1 -1 0 Supervisor E ngine V -1 0GE (WS-X4 516-1 0GE) Figur e 1 -1 1 Super.
1-22 Catalyst 4500 E-Se ries Switches Installatio n Guide OL-13972-01 Chapter 1 Produc t Overview Supervisor E ngines • RESET Bu tton, page 1-24 • Compact Flash Slot, page 1-24 LEDs Ta b l e 1-6 describes th e supervis or engine LE Ds. Gigabit Etherne t Uplink Ports The G igabit E therne t upl ink por ts oper ate in ful l-dupl ex mode on ly .
1-23 Catalyst 4500 E-Se ries Switches Installatio n Guide OL-13972-01 Chapter 1 Product Overv iew Superv isor Engi nes 10-Gigabit Ethernet Uplink Ports The 10- Gigabi t Ethe rnet u plink port s oper ate in ful l-dupl ex mode on ly , and a re o nly on the WS-X4516 -10GE, WS-X4013 +10G E, and WS-45-Sup6 -E.
1-24 Catalyst 4500 E-Se ries Switches Installatio n Guide OL-13972-01 Chapter 1 Produc t Overview Fan Assem bly Note EI A/TIA- 232 was known as reco mmen ded stand ard RS -232 befo re its acc eptan ce as a stan dard by the Electr onic Indu stries Allia nce (EIA ) and T el ecommu nic ations Indust ry Associ ation (T IA).
1-25 Catalyst 4500 E-Se ries Switches Installatio n Guide OL-13972-01 Chapter 1 Product Overv iew Power Supplies Figur e 1-1 2 C a t a l y s t 4506-E A irflo w Power Supplies Note For detailed specif icat ions on all Catalyst 4500 po wer supplies, refer to the “Catalyst 4 507R-E Sw itch Specifications ” secti on on page A-3 .
1-26 Catalyst 4500 E-Se ries Switches Installatio n Guide OL-13972-01 Chapter 1 Produc t Overview Power Supp lies Figur e 1 -13 A C-Input P o w er Supply (Al l Exc ept 4200 W) Figur e 1 -14 4200 W Dual Input A C P o w er Supply Note Th e 4200 W AC power supply shoul d not be used in mi xed-voltage configur ation s.
1-27 Catalyst 4500 E-Se ries Switches Installatio n Guide OL-13972-01 Chapter 1 Product Overv iew Power Supplies Figur e 1 -15 1400 W D C-Input P ow e r Supply Figur e 1 -16 1400 W DC T ripl e-Input P.
1-28 Catalyst 4500 E-Se ries Switches Installatio n Guide OL-13972-01 Chapter 1 Produc t Overview Power Supp lies Power Sup ply LED s Ta b l e 1-7 describes th e power supply LEDs. Power Sup ply Fan Each po wer supply has a built-in fan. Air enters the fr ont of the po wer supply (po wer -in put end) and e xits throug h the back .
1-29 Catalyst 4500 E-Se ries Switches Installatio n Guide OL-13972-01 Chapter 1 Product Overv iew Power Supplies When you ins tall a redu ndant po we r supply , load sharing and f ault tolerance are enabled au tomat ically; no additiona l software configur ation is re quired.
1-30 Catalyst 4500 E-Se ries Switches Installatio n Guide OL-13972-01 Chapter 1 Produc t Overview Power Supp lies The maxi mum total i nput current is 42.5A an d the maxim um ambient t emperat ure is 55 C. T o determ ine total maxi mum input power to a supply , add up the active individual modu le input power rating s.
1-31 Catalyst 4500 E-Se ries Switches Installatio n Guide OL-13972-01 Chapter 1 Product Overv iew System Ar chit ectur e System Architecture This section de scribes the inter action betwee n the v arious syste m components of Cataly st 4500 E-series switches.
1-32 Catalyst 4500 E-Se ries Switches Installatio n Guide OL-13972-01 Chapter 1 Produc t Overview System A rchitect ure Powe r Flow Figure 1-17 shows power ingress and f low through the system . Figur e 1-1 7 Po w e r F l o w Po wer enters the switch through the po wer supplies.
1-33 Catalyst 4500 E-Se ries Switches Installatio n Guide OL-13972-01 Chapter 1 Product Overv iew System Ar chit ectur e ne w outlets and costly electrical circuits. PoE also enab les bu sinesses to isolate critica l de vices on a single power system so that the entir e system ca n be support ed by uninte rrupta ble power supply (U PS) backup.
1-34 Catalyst 4500 E-Se ries Switches Installatio n Guide OL-13972-01 Chapter 1 Produc t Overview System A rchitect ure All PoE switch ing mod ules c an disti nguish a n IEEE or Cisco p restand ard powered device from an unpo were d network inter face card (NIC) to ensure po wer is applied only when an appropriat e de vice is connec ted.
1-35 Catalyst 4500 E-Se ries Switches Installatio n Guide OL-13972-01 Chapter 1 Product Overv iew System Ar chit ectur e Cisco Catalyst 4500 Series Service Provider DC Power Suppl y The t riple -input 1400 W DC power sup ply is op timize d for service provide r or c entra l-off ice deploymen ts.
1-36 Catalyst 4500 E-Se ries Switches Installatio n Guide OL-13972-01 Chapter 1 Produc t Overview System A rchitect ure Switching Traffic Flow All Catalyst 4500 series switches use a share d memory switching fa bric. All forw arding decisio ns, QoS, security po licies and t ransmit queu ing are imp lemented in the Superviso r Engine .
1-37 Catalyst 4500 E-Se ries Switches Installatio n Guide OL-13972-01 Chapter 1 Product Overv iew System Ar chit ectur e In a Catalyst 4500 E-ser ies chassi s with the Supe rviso r 6-E, ther e is no perform ance degradation wh en both Classic and E-series line cards are mixed with in t he chassis.
1-38 Catalyst 4500 E-Se ries Switches Installatio n Guide OL-13972-01 Chapter 1 Produc t Overview System A rchitect ure.
CH A P T E R 2-1 Catalyst 4500 E-Se ries Switches Installatio n Guide OL-13972-01 2 Preparing for Installation War ni n g This unit is intended for installat ion in restri cted access area s. A restricted access area can be accessed only through the use of a sp ecial tool , lock and key , or other means of security .
2-2 Catalyst 4500 E-Se ries Switches Installatio n Guide OL-13972-01 Chapter 2 Preparing for Installation Electro static Disch arge Note See the Site -Pl an nin g C he ck list at the en d of th is chap ter to help ensure that y ou comple te all site-planning acti vities b efore you install th e switch.
2-3 Catalyst 4500 E-Se ries Switches Installatio n Guide OL-13972-01 Chapter 2 Preparing for Inst allation Site Pow er Requi remen ts and Heat Diss ipat ion • When r emo ving a compon ent, u se an y a v ail able ejector le ve rs or cap tiv e insta llation scre ws to releas e the b us connecto rs from the backp lane or mid plane.
2-4 Catalyst 4500 E-Se ries Switches Installatio n Guide OL-13972-01 Chapter 2 Preparing for Installation Power Conn ection Gu ideline s for AC-Pow ered Sys tems • Make sure the AC po wer recep tacl es used to plug in the chassis ar e the groun ding type .
2-5 Catalyst 4500 E-Se ries Switches Installatio n Guide OL-13972-01 Chapter 2 Preparing for Inst allation Power Conn ecti on Guidel ines for AC -Power ed Syste ms Ta b l e 2-1 A C-Input P o w er Cor d Options Locale Part Number Leng th Plug Ra ting Plug T ype 1000 W Power Su pply (PWR-C45-1000AC= ) Applia nce Coupler North Amer ica CAB-7KAC= 8.
2-6 Catalyst 4500 E-Se ries Switches Installatio n Guide OL-13972-01 Chapter 2 Preparing for Installation Power Conn ection Gu ideline s for AC-Pow ered Sys tems Australia, New Zeala nd CAB-75 13A CA= 14 ft ( 4.3 m ) 250 V A C, 15 A SAA/3, AS/NZZS 3112 -1993 Europe (except Italy ) CAB-75 13A CE= 14 ft (4.
2-7 Catalyst 4500 E-Se ries Switches Installatio n Guide OL-13972-01 Chapter 2 Preparing for Inst allation Power Conn ecti on Guidel ines for AC -Power ed Syste ms Internation al CAB-AC-2800W - INT= 13.
2-8 Catalyst 4500 E-Se ries Switches Installatio n Guide OL-13972-01 Chapter 2 Preparing for Installation Power Conn ection Gu ideline s for AC-Pow ered Sys tems North Amer ica (non-l ocking ) 200–240 V A C operati on CAB-US620 P-C19-U S 13.2 ft (4.
2-9 Catalyst 4500 E-Se ries Switches Installatio n Guide OL-13972-01 Chapter 2 Preparing for Inst allation Power Conn ecti on Guidel ines for DC -Power ed Syste ms Power Connection Gu idelines for DC-.
2-10 Catalyst 4500 E-Se ries Switches Installatio n Guide OL-13972-01 Chapter 2 Preparing for Installation Vent il atio n • 10 X 6.3 W = 63 W for inline de vices. 6.3 W atts is cor rect for a Cisco IP pho ne. W att age consum ption will de pend on the i nline device used.
2-11 Catalyst 4500 E-Se ries Switches Installatio n Guide OL-13972-01 Chapter 2 Preparing for Inst allation Site-Planning Checklist Calcula ting Syst em Heat Dissipa tion T o calcu late the expected h.
2-12 Catalyst 4500 E-Se ries Switches Installatio n Guide OL-13972-01 Chapter 2 Preparing for Installation Site-Planni ng Checklist Ta b l e 2-2 Sit e-Planni ng Chec klist Ta s k N o .
CH A P T E R 3-1 Catalyst 4500 E-Se ries Switches Installatio n Guide OL-13972-01 3 Installing the Switch in a Rack War ni n g This unit is intended for installat ion in restri cted access area s. A restricted access area can be accessed only through the use of a sp ecial tool , lock and key , or other means of security .
3-2 Catalyst 4500 E-Se ries Switches Installatio n Guide OL-13972-01 Chapter 3 Installing the Switch in a Rack Rack-Moun ting the Sw itch Foll o w these steps to chec k the cont ents of the shippin g .
3-3 Catalyst 4500 E-Se ries Switches Installatio n Guide OL-13972-01 Chapter 3 Installing the Sw itch in a Rack Rack-Mo unti ng the Swi tch Rack-Mounting Catalyst 4500 E-se ries Sw itches Note If you .
3-4 Catalyst 4500 E-Se ries Switches Installatio n Guide OL-13972-01 Chapter 3 Installing the Switch in a Rack Rack-Moun ting the Sw itch See Figure 3-1 for the Catalyst 4506-E switch, the other switches will be v ery similar .
3-5 Catalyst 4500 E-Se ries Switches Installatio n Guide OL-13972-01 Chapter 3 Installing the Sw itch in a Rack System Groun d Connecti on Gui delines Figur e 3-2 Installing a Cata lyst 4506-E Sw itc .
3-6 Catalyst 4500 E-Se ries Switches Installatio n Guide OL-13972-01 Chapter 3 Installing the Switch in a Rack System G round Con nection Gui delines Parts an d Requ ired T ools Note Some parts and required tools described in this section are not a va ilable from Cisco Systems.
3-7 Catalyst 4500 E-Se ries Switches Installatio n Guide OL-13972-01 Chapter 3 Installing the Sw itch in a Rack System Groun d Connecti on Gui delines Figur e 3-3 Connecting Sys te m Gr ound on th e S witch Step 5 Remove the label th at covers t he groun ding pad.
3-8 Catalyst 4500 E-Se ries Switches Installatio n Guide OL-13972-01 Chapter 3 Installing the Switch in a Rack System G round Con nection Gui delines Note If you mov e a su perviso r eng ine from a Cat alyst 45 00 seri es cha ssis to a Cat alyst 450 3-E cha ssis or Catalyst 4506-E chassis, it must use Cisco IOS Release 12.
CH A P T E R 4-1 Catalyst 4500 E-Se ries Switches Installatio n Guide OL-13972-01 4 Removing and Replacing FRUs War ni n g Read the installation instructi ons before connecting the sy stem to the power source. Statement 1004 War ni n g Only trained and qualif ied personnel should be allowed t o install, replace, or s ervice this equipment.
4-2 Catalyst 4500 E-Se ries Switches Installatio n Guide OL-13972-01 Chapte r 4 Removing an d Repla cing FRUs Removing and Repla cing the Power Supply Removing and Re placing the Power Supply This sectio n descr ibes how to remove and install t he A C-input power supply and DC-i nput power supply for th e Ca talyst 4500 E-seri es swi tches .
4-3 Catalyst 4500 E-Se ries Switches Installatio n Guide OL-13972-01 Chapter 4 Removing and Repl acing FRU s Rem ovin g and Repl acin g the Powe r Su pply Figur e 4-2 4200 W Dual-Input A C P o w er Su.
4-4 Catalyst 4500 E-Se ries Switches Installatio n Guide OL-13972-01 Chapte r 4 Removing an d Repla cing FRUs Removing and Repla cing the Power Supply Figur e 4-4 1400 W DC T r iple-input P ower Su pply Required To ols Y ou will need a f lathead or Phillips sc re wdri ve r to per form these procedur es.
4-5 Catalyst 4500 E-Se ries Switches Installatio n Guide OL-13972-01 Chapter 4 Removing and Repl acing FRU s Rem ovin g and Repl acin g the Powe r Su pply Figur e 4-6 Loosenin g the Side-C lamp Scr ew Step 3 Disconne ct the power cord fr om the power supply be ing removed.
4-6 Catalyst 4500 E-Se ries Switches Installatio n Guide OL-13972-01 Chapte r 4 Removing an d Repla cing FRUs Removing and Repla cing the Power Supply Figur e 4-8 Handling an AC -Input P o w er Supply Step 6 Pull the p ower supply ou t of the bay a nd set it aside .
4-7 Catalyst 4500 E-Se ries Switches Installatio n Guide OL-13972-01 Chapter 4 Removing and Repl acing FRU s Rem ovin g and Repl acin g the Powe r Su pply Step 6 Using a scre wdr i ver , tighten the two c apti ve in stallation scr ews ( see Figure 4-1 ) on the f ront pane l of th e A C-input power supply .
4-8 Catalyst 4500 E-Se ries Switches Installatio n Guide OL-13972-01 Chapte r 4 Removing an d Repla cing FRUs Removing and Repla cing the Power Supply Step 13 Chec k the p ower supply an d syst em sta tus from the system c onsole by ente ring show power command.
4-9 Catalyst 4500 E-Se ries Switches Installatio n Guide OL-13972-01 Chapter 4 Removing and Repl acing FRU s Rem ovin g and Repl acin g the Powe r Su pply Figur e 4-1 1 DC-Input P o w er Supply Figur e 4-1 2 DC T r iple-input P ower Supp ly Step 5 Disconne ct the D C-input wires from t he termina l bloc k.
4-10 Catalyst 4500 E-Se ries Switches Installatio n Guide OL-13972-01 Chapte r 4 Removing an d Repla cing FRUs Removing and Repla cing the Power Supply Figur e 4-1 3 Connect ing the DC-In put Wir es F.
4-11 Catalyst 4500 E-Se ries Switches Installatio n Guide OL-13972-01 Chapter 4 Removing and Repl acing FRU s Rem ovin g and Repl acin g the Powe r Su pply Step 7 Grasp the power supply h andle wit h one h and. Place your ot her hand undern eath as yo u slowly pull the power supply out o f the bay ( see Figure 4-16 ).
4-12 Catalyst 4500 E-Se ries Switches Installatio n Guide OL-13972-01 Chapte r 4 Removing an d Repla cing FRUs Removing and Repla cing the Power Supply Installation Procedure War ni n g Before performing any of the f ollowing procedures , ensure that power is removed from the DC circuit .
4-13 Catalyst 4500 E-Se ries Switches Installatio n Guide OL-13972-01 Chapter 4 Removing and Repl acing FRU s Removing an d Repla cing the Ch assis Fan Assem bly Cautio n In a sy stem w ith m ultipl e power supp lies o r a single t riple- input power supply , connec t each power supply to a separ ate DC po wer source .
4-14 Catalyst 4500 E-Se ries Switches Installatio n Guide OL-13972-01 Chapte r 4 Removing an d Repla cing FRUs Removing and Repla cing the Cha ssis Fa n Assem bly Figur e 4-1 7 Catalyst 4506-E S yst e.
4-15 Catalyst 4500 E-Se ries Switches Installatio n Guide OL-13972-01 Chapter 4 Removing and Repl acing FRU s Replaci ng Backp lane Modu les Verifying the Installation Note T o c heck the operati on of the fa ns, you n eed to power u p the chassis.
4-16 Catalyst 4500 E-Se ries Switches Installatio n Guide OL-13972-01 Chapte r 4 Removing an d Repla cing FRUs Replacin g Backpla ne Modules Figur e 4-1 8 Catalyst 4507R-E Bac kplan e Step 4 If yo u are removin g a clock modul e, re move the t wo screws th at at tach the m odule t o t he bac kplan e.
4-17 Catalyst 4500 E-Se ries Switches Installatio n Guide OL-13972-01 Chapter 4 Removing and Repl acing FRU s Replaci ng Backp lane Modu les Figur e 4-2 0 Releasing the Modul e Step 7 Pull out the module while holding the top lef t and top right corners.
4-18 Catalyst 4500 E-Se ries Switches Installatio n Guide OL-13972-01 Chapte r 4 Removing an d Repla cing FRUs Replacin g Backpla ne Modules Figur e 4-2 3 Cor r ect M odule Seating Step 10 Push the mo dule toward the back of the ch assis and make sure it is cli pped in by the lev ers on both sides.
4-19 Catalyst 4500 E-Se ries Switches Installatio n Guide OL-13972-01 Chapter 4 Removing and Repl acing FRU s Super viso r Mem ory Upgr ade Supervisor Memory Upgrade This se ction descri bes how to pe rform a me mory upgrade .
4-20 Catalyst 4500 E-Se ries Switches Installatio n Guide OL-13972-01 Chapte r 4 Removing an d Repla cing FRUs Supervisor M emory U pgrade Figur e 4-2 5 Catalyst 45 00 E-Ser ies Supe rvisor Engine 6-E.
4-21 Catalyst 4500 E-Se ries Switches Installatio n Guide OL-13972-01 Chapter 4 Removing and Repl acing FRU s Super viso r Mem ory Upgr ade Figur e 4-2 6 Remo ving and Installing SDRAM MiniDIMMs Step .
4-22 Catalyst 4500 E-Se ries Switches Installatio n Guide OL-13972-01 Chapte r 4 Removing an d Repla cing FRUs Supervisor M emory U pgrade Step 3 Hold th e mini DIMM co mpone nt-sid e up, with c onnec tor edge (the meta l fingers) away from yo u.
CH A P T E R 5-1 Catalyst 4500 E-Se ries Switches Installatio n Guide OL-13972-01 5 Troubleshooting If your system has problems durin g start up or operation, use the informa tion in this chapter to help isolate the cause.
5-2 Catalyst 4500 E-Se ries Switches Installatio n Guide OL-13972-01 Chapt er 5 Tro ubles hoot ing System B oot Verificat ion • T roubleshoot ing Bac kplane M odules, p age 5-7 • T rouble shooting.
5-3 Catalyst 4500 E-Se ries Switches Installatio n Guide OL-13972-01 Chapter 5 Troublesh ooting Using LEDs to Identify Startup Problems and wher e the s ystem faile d in the star tup seque nce.
5-4 Catalyst 4500 E-Se ries Switches Installatio n Guide OL-13972-01 Chapt er 5 Tro ubles hoot ing System M essag es System Messages System messag es appea r on the consol e if you have enabled cons ole logg ing or appe ar in the syslog if you have enabled syslog .
5-5 Catalyst 4500 E-Se ries Switches Installatio n Guide OL-13972-01 Chapter 5 Troublesh ooting Troubleshooting the Power Supply Step 6 If the LED labeled F AN OK fails to light when the switch is connected to a good po wer source with a kno wn goo d po wer cord, there is a malfunctio n in the f an that cools th e po wer sup ply .
5-6 Catalyst 4500 E-Se ries Switches Installatio n Guide OL-13972-01 Chapt er 5 Tro ubles hoot ing Troubl esh ooti ng the Fa n Assemb ly If the s how module command output shows a message that st ates.
5-7 Catalyst 4500 E-Se ries Switches Installatio n Guide OL-13972-01 Chapter 5 Troublesh ooting Troubl eshooti ng Backpl ane Modul es System Mes sages and F an Problems Look for syst em messa ges re portin g a tem pera ture prob lem or prob lem w ith the fans.
5-8 Catalyst 4500 E-Se ries Switches Installatio n Guide OL-13972-01 Chapt er 5 Tro ubles hoot ing Troubles hooting Switchin g Mo dules If you observe th ese con ditions, conta ct the Cisco T AC for assist ance in orde ring re placem ent redunda ncy module s and a cloc k.
5-9 Catalyst 4500 E-Se ries Switches Installatio n Guide OL-13972-01 Chapter 5 Troublesh ooting Troubleshooting Switching Modules System Mes sages and S witchin g Modules Connect a terminal to the con.
5-10 Catalyst 4500 E-Se ries Switches Installatio n Guide OL-13972-01 Chapt er 5 Tro ubles hoot ing Troub lesho oting Su pervi sor Engines Troubleshooting Supervi sor Engine s This se ction only a ddresses probl ems w ith hard ware. Probl ems w ith f eatures or co nfiguration are n ot covered here.
5-11 Catalyst 4500 E-Se ries Switches Installatio n Guide OL-13972-01 Chapter 5 Troublesh ooting Troubl eshoot ing Superv isor Engines C4K_HW -3-X2OUIREGREAD F AILURE C4K_HW A CLMAN-4- CLASSIFC AMP AR.
5-12 Catalyst 4500 E-Se ries Switches Installatio n Guide OL-13972-01 Chapt er 5 Tro ubles hoot ing Troub lesho oting Su pervi sor Engines Useful CL I Comman ds Some proble ms can be solved by resetting t he super visor eng ine.
5-13 Catalyst 4500 E-Se ries Switches Installatio n Guide OL-13972-01 Chapter 5 Troublesh ooting Troubl eshoot ing Superv isor Engines • Configuration register • Calendar • VLAN database If a so.
5-14 Catalyst 4500 E-Se ries Switches Installatio n Guide OL-13972-01 Chapt er 5 Tro ubles hoot ing Troub lesho oting Su pervi sor Engines • A bad port • Speed and dupl ex mismatch • Network int.
5-15 Catalyst 4500 E-Se ries Switches Installatio n Guide OL-13972-01 Chapter 5 Troublesh ooting Troubl eshoot ing Superv isor Engines If the sta tus is “po wer -bad, ” the switch detec ts a switching m odule b ut is unable to allo cate po wer .
5-16 Catalyst 4500 E-Se ries Switches Installatio n Guide OL-13972-01 Chapt er 5 Tro ubles hoot ing Troub lesho oting Su pervi sor Engines NIC Compatibility Issues Y ou can ha ve NIC compa tibility or.
5-17 Catalyst 4500 E-Se ries Switches Installatio n Guide OL-13972-01 Chapter 5 Troublesh ooting Troubl eshoot ing Superv isor Engines Boot Problem s If the sw itch i s in a c ontinuou s boot loop, is in ROMmon mode , or does not hav e a sy stem i mage, t here is most ly likely n ot a ha rdware problem .
5-18 Catalyst 4500 E-Se ries Switches Installatio n Guide OL-13972-01 Chapt er 5 Tro ubles hoot ing Contacting the Cisco Te chnica l Assistance Center Step 7 If you canno t conn ect t o the switch thr ough the me1 inter face, ma ke sure the c onnec ted device is configured for half-d uplex 1 0-Mbp s operat ion .
5-19 Catalyst 4500 E-Se ries Switches Installatio n Guide OL-13972-01 Chapter 5 Troublesh ooting Contac ting the C isco Tec hnical Assi stance C enter • Maintenan ce agreement or w arranty info rmat.
5-20 Catalyst 4500 E-Se ries Switches Installatio n Guide OL-13972-01 Chapt er 5 Tro ubles hoot ing Contacting the Cisco Te chnica l Assistance Center.
A- 1 Catalyst 4500 E-S eries Switche s Installation Gui de OL-13972-01 APPENDIX A Specifications Cable and t echnica l specifications for Catalyst 4500 E-series switche s are provid ed in the follo wi.
A- 2 Catalyst 4500 E-Se ries Switches Installatio n Guide OL-13972-01 Appendix A Specifications Catalyst 4506 -E Switch Speci fications Catalyst 4506-E Switch Specifications Ta b l e A- 2 lists the Catalyst 4506-E switc h spec ifications.
A-3 Catalyst 4500 E-S eries Switche s Installation Gui de OL-13972-01 Append ix A Specification s Catalyst 4507R-E Switch Specificati ons Catalyst 4507R-E Switch Specifications Ta b l e A- 3 lists the Catalyst 4507R-E switch specifications.
A- 4 Catalyst 4500 E-Se ries Switches Installatio n Guide OL-13972-01 Appendix A Specifications Catalyst 4507 R-E Switch Speci fications Altitude: operati ng nonope ratin g –196 t o 656 1 ft ( –60.
A-5 Catalyst 4500 E-S eries Switche s Installation Gui de OL-13972-01 Append ix A Specification s Catalyst 4510R-E Switch Specificati ons Catalyst 4510R-E Switch Specifications Ta b l e A- 4 lists the Catalyst 4510R-E switch specifications.
A- 6 Catalyst 4500 E-Se ries Switches Installatio n Guide OL-13972-01 Appendix A Specifications Cataly st 45 00 Powe r Supp lies Catalyst 4500 Power Supplies Ta b l e s A-5 th rough A-12 list the specific ations for the Catalyst 4500 series p ower supplies, wh ich c an be used in any Cata lyst 45 00 E-ser ies switch.
A-7 Catalyst 4500 E-S eries Switche s Installation Gui de OL-13972-01 Append ix A Specification s Catalyst 4500 Power Supp lies Ta b l e A -5 1 000 W A C-Input P ower Su pply Specific ations Item Specification Minim um software re quirem ent Cisco IOS Relea se 12.
A- 8 Catalyst 4500 E-Se ries Switches Installatio n Guide OL-13972-01 Appendix A Specifications Cataly st 45 00 Powe r Supp lies Cautio n Do not mix th e 140 0 W D C power supp ly wi th any othe r power sup ply , e ven for a h ot swap or othe r short-term emergency .
A-9 Catalyst 4500 E-S eries Switche s Installation Gui de OL-13972-01 Append ix A Specification s Catalyst 4500 Power Supp lies Input power Curr ent draw At –40.5 V (min vo ltage) Cur rent dra w a t –72 V (max v oltage) Max he at dissipatio n at 1866 W 1866 W (Data on ly) 46 A 25.
A-10 Catalyst 4500 E-Se ries Switches Installatio n Guide OL-13972-01 Appendix A Specifications Cataly st 45 00 Powe r Supp lies Curr ent draw at – 40.
A-11 Catalyst 4500 E-S eries Switche s Installation Gui de OL-13972-01 Append ix A Specification s Catalyst 4500 Power Supp lies Cataly st 4503-E Specific Power U sage (data only) T wo module s minimum required @ –40 .
A-12 Catalyst 4500 E-Se ries Switches Installatio n Guide OL-13972-01 Appendix A Specifications Cataly st 45 00 Powe r Supp lies Ta b l e A -1 1 Al l owa bl e Power w it h T wo 1 4 0 0 W DC T r iple-I.
A-13 Catalyst 4500 E-S eries Switche s Installation Gui de OL-13972-01 Append ix A Specification s Catalyst 4500 Power Supp lies Note Th e 4200 W AC power supply shoul d not be used in mi xed-voltage configur ation s. All the i nputs in a chass is mu st be at th e same voltage (11 0 V A C or 220 VA C ) .
A-14 Catalyst 4500 E-Se ries Switches Installatio n Guide OL-13972-01 Appendix A Specifications Cataly st 45 00 Powe r Supp lies Both sides at 220 1360 40 4700 5493 Both sides at 220+220 1360 40 6800 .
B-1 Catalyst 4500 E-S eries Switche s Installation Gui de OL-13972-01 APPENDIX B Repackin g a Switch If you need t o return yo ur Catalyst 4500 E-series switch to the f actory , use the instru ctions in this appendi x to repack your switc h in prepara tion for shipping.
B-2 Catalyst 4500 E-Se ries Switches Installatio n Guide OL-13972-01 Appendix B Repacking a Switch Figur e B-1 C atal yst 4 50 0 E -series Switch Packing Ma ter ial Packing carton Packing foam Packing.
C-1 Catalyst 4500 E-S eries Switche s Installation Gui de OL-13972-01 APPENDIX C Initial Co nfiguration for the Switch This chap ter pro vides a quick ste p-by -step initia l setup pro cedure f or a switch . These steps describe how to do a simple installation: 1.
C-2 Catalyst 4500 E-Se ries Switches Installatio n Guide OL-13972-01 Appendix C Initial Configuration for the Switch Connecting t o the Switch Connecting to the Switch Y ou must use the con sole p ort to p erform t he init ial configurat ion. T o c onnect the swit ch conso le port t o a PC, use the suppl ied RJ-45- to-DB- 9 adapter ca ble.
C-3 Catalyst 4500 E-S eries Switche s Installation Gui de OL-13972-01 Append ix C Initial Configuration for the Switch Entering the Initial Configuration Information As the switch po wer s on, it be gins the POST , a series of tests that runs automatic ally to ensur e that the swi tch f unc tions pro perl y .
C-4 Catalyst 4500 E-Se ries Switches Installatio n Guide OL-13972-01 Appendix C Initial Configuration for the Switch Enterin g the Initial Conf igurati on Informat ion Step 4 Ente r t he configur e t erminal comma nd to enter gl obal configurat ion mode.
C-5 Catalyst 4500 E-S eries Switche s Installation Gui de OL-13972-01 Append ix C Initial Configuration for the Switch Entering the Initial Configuration Information !--- Output suppressed. Step 13 Configure a defaul t route : Switch1(config)# ip route 0.
C-6 Catalyst 4500 E-Se ries Switches Installatio n Guide OL-13972-01 Appendix C Initial Configuration for the Switch Enterin g the Initial Conf igurati on Informat ion.
D- 1 Catalyst 4500 E-S eries Switche s Installation Gui de OL-13972-01 APPENDIX D Module Overview and Sp ecifications This ch apter pr ov ides an ov ervi e w of the features of the Catalys t 4500 E-seri es su perviso r eng ine and switchin g modules.
D- 2 Catalyst 4500 E-Se ries Switches Installatio n Guide OL-13972-01 Appendi x D Module Overvi ew and Speci fica tions Supervisor E ngines On th e Catal yst 4503 -E a nd 4506- E sw itches, you c an ins tall t he Supe rvisor E ngin e in s lot 1 only .
D-3 Catalyst 4500 E-S eries Switche s Installation Gui de OL-13972-01 Append ix D Module Ov erview and Speci fications Superv isor Engi nes Front-Panel Components The following c onnec tors, LEDs , an.
D- 4 Catalyst 4500 E-Se ries Switches Installatio n Guide OL-13972-01 Appendi x D Module Overvi ew and Speci fica tions Swit ch ing M odul es Ethernet Ma nagemen t Port The WS-X4 013+10 GE superv isor en gine modu les have a 10/100 /1000BASE-T Eth ernet mana gement port.
D-5 Catalyst 4500 E-S eries Switche s Installation Gui de OL-13972-01 Append ix D Module Ov erview and Speci fications Switching Modules WS-X 4606 -X2-E The WS-X 4606 -X2-E 6 -Port 10GbE (X2) switc hi.
D- 6 Catalyst 4500 E-Se ries Switches Installatio n Guide OL-13972-01 Appendi x D Module Overvi ew and Speci fica tions Swit ch ing M odul es 211397 Figur e D-3 WS-X4 548-GB-RJ45 V -E 48-P ort IEEE-Co.
D-7 Catalyst 4500 E-S eries Switche s Installation Gui de OL-13972-01 Append ix D Module Ov erview and Speci fications Switching Modules Switching Module LEDs Each switchi ng module has one LED la beled ST A TUS that prov ides informa tion about the module and one numbe red LED lab eled LI NK for each port on th e module .
D- 8 Catalyst 4500 E-Se ries Switches Installatio n Guide OL-13972-01 Appendi x D Module Overvi ew and Speci fica tions Hot- Swap pin g Fe atur e Hot-Swapping Feature Catalyst 4500 E- series s witch es allo w you to remo v e and re place swi tchin g modu les with out po wer ing do wn th e switc h.
IN-1 Catalyst 4500 E-S eries Switche s Installation Gui de OL-13972-01 INDEX Numerics 10/100BAS E-T Ether net manage ment por t D-4 port LED s 5-8, D-7 1000BASE -T interfac es 1-3, 1-6, 1-10, 1-14 100.
Index IN-2 Catalyst 4500 E-S eries Switche s Installat ion Guide OL-13972-01 Catalyst 4503-E switches chass is dimensio ns A-2 featu res 1-3 front view 1-2 power requi remen ts 2-3 repack ing B-1 spec.
Inde x IN-3 Catalyst 4500 E-S eries Switche s Installation Gui de OL-13972-01 descript ion D-4 Ether net manage ment por ts LEDs 5-3 network switchin g not suppo rted ( note) D- 4 troublesh ooting 5-3.
Index IN-4 Catalyst 4500 E-S eries Switche s Installat ion Guide OL-13972-01 installing AC-inp ut power suppli es 4-4 to 4-8 DC-inp ut power suppli es 4-8 to 4-13 fan assemblies 4-13 to 4-15 installin.
Inde x IN-5 Catalyst 4500 E-S eries Switche s Installation Gui de OL-13972-01 S serial num bers 5-18 ship pi ng i nstru ctio ns B-1 show port com mand D-8 show system command 4-8 site planni ng chec k.
Index IN-6 Catalyst 4500 E-S eries Switche s Installat ion Guide OL-13972-01.
Un punto importante, dopo l’acquisto del dispositivo (o anche prima di acquisto) è quello di leggere il manuale. Dobbiamo farlo per diversi motivi semplici:
Se non hai ancora comprato il Cisco Systems WSUPOE12VPSPL è un buon momento per familiarizzare con i dati di base del prodotto. Prime consultare le pagine iniziali del manuale d’uso, che si trova al di sopra. Dovresti trovare lì i dati tecnici più importanti del Cisco Systems WSUPOE12VPSPL - in questo modo è possibile verificare se l’apparecchio soddisfa le tue esigenze. Esplorando le pagine segenti del manuali d’uso Cisco Systems WSUPOE12VPSPL imparerai tutte le caratteristiche del prodotto e le informazioni sul suo funzionamento. Le informazioni sul Cisco Systems WSUPOE12VPSPL ti aiuteranno sicuramente a prendere una decisione relativa all’acquisto.
In una situazione in cui hai già il Cisco Systems WSUPOE12VPSPL, ma non hai ancora letto il manuale d’uso, dovresti farlo per le ragioni sopra descritte. Saprai quindi se hai correttamente usato le funzioni disponibili, e se hai commesso errori che possono ridurre la durata di vita del Cisco Systems WSUPOE12VPSPL.
Tuttavia, uno dei ruoli più importanti per l’utente svolti dal manuale d’uso è quello di aiutare a risolvere i problemi con il Cisco Systems WSUPOE12VPSPL. Quasi sempre, ci troverai Troubleshooting, cioè i guasti più frequenti e malfunzionamenti del dispositivo Cisco Systems WSUPOE12VPSPL insieme con le istruzioni su come risolverli. Anche se non si riesci a risolvere il problema, il manuale d’uso ti mostrerà il percorso di ulteriori procedimenti – il contatto con il centro servizio clienti o il servizio più vicino.
