Manuale d’uso / di manutenzione del prodotto 6500 del fabbricante Cisco Systems
Vai alla pagina of 1278
Corporate He adquarters Cisc o Syst ems , Inc . 170 West Ta sman Drive San Jos e, CA 95 134-1706 USA http://www.ci sco.com Tel: 408 526-4000 800 553- NETS (638 7) Fax: 408 526-4100 Catalyst 650 0 Series S w itc h Command Reference R ele ase 8 .
THE SPECIFICATIONS AND INFORMATION REG ARDING THE PRODUCTS IN THIS MANUAL ARE SUBJECT TO CHANGE WITHOU T NOTICE. ALL STATEMENT S, INFORMATI ON, AND RECOMMENDA TIONS IN T HIS MANUAL ARE BELIEVED TO BE ACCURATE BU T ARE PRESEN TED WITHOUT WARRANTY OF ANY KIND, EXPRE SS OR IMPLIED.
iii Catalyst 6500 Series Switch Command Reference—Release 8.1 78-15474-01 CONTENTS Preface xx vii Audienc e xxvii Organi zation xx vii Relat ed D ocum ent atio n xxvi i Conv enti ons xxviii Obtain ing Docu mentati on xxix Cisco.
Cont ent s iv Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 8.1 78-15474-01 clea r bo o t au to -c onf ig 2-10 clea r bo o t de vi ce 2-11 clea r bo o t sy st em 2-1 2 clea r ca m 2-13 c.
Content s v Catalyst 6500 Series Switch Command Reference—Release 8.1 78-15474-01 clear logg ing cal lhome 2-49 clear l oggi ng ca llho me fr om 2-51 clear l oggi ng ca llho me re ply- to 2-5 2 clea.
Cont ent s vi Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 8.1 78-15474-01 clea r qo s ma c- co s 2-91 clea r qo s ma p 2-9 2 clea r qo s pol i c ed -d s cp -ma p 2-94 clea r qo s pol i.
Content s vii Catalyst 6500 Series Switch Command Reference—Release 8.1 78-15474-01 clea r sys tem inf o-lo g com mand 2-134 clea r tac acs key 2-135 clea r tac acs serv er 2-13 6 clea r ti mezon e .
Cont ent s viii Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 8.1 78-15474-01 ping 2-188 pwd 2-19 1 quit 2-192 reconf irm vmps 2-193 reloa d 2-194 repeat 2-195 reset— ROM moni tor 2-19.
Content s ix Catalyst 6500 Series Switch Command Reference—Release 8.1 78-15474-01 set cam 2-24 3 set ca m noti ficatio n 2- 245 set cdp 2 -248 set c han nelpr ot ocol 2-250 set ch ann el v lan cost.
Cont ent s x Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 8.1 78-15474-01 set ig mp leave -qu ery- type 2-294 set igmp mod e 2-295 set igmp qu erie r 2 -296 set ig mp ra teli mit 2-298 .
Content s xi Catalyst 6500 Series Switch Command Reference—Release 8.1 78-15474-01 set log ging ca ll home des tinati on 2-3 41 set log ging ca ll home fr om 2-343 set log ging ca ll home re ply-to .
Cont ent s xii Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 8.1 78-15474-01 set nt p ti mez one 2-390 set passw or d 2-391 set pbf 2-392 set pbf- map 2-3 94 set pbf v lan 2-396 set po r.
Content s xiii Catalyst 6500 Series Switch Command Reference—Release 8.1 78-15474-01 set po rt qos tru st 2-44 9 set p ort q os trus t-dev ice 2-45 1 set p ort q os trus t-ext 2-452 set po rt rsvp d.
Cont ent s xiv Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 8.1 78-15474-01 set q os rx q-ra tio 2 -508 set qos s tati sti cs expor t 2-510 set qo s s tati stic s ex por t ag greg ate 2.
Content s xv Catalyst 6500 Series Switch Command Reference—Release 8.1 78-15474-01 set snmp gr oup 2-56 4 set sn mp if alia s 2-565 set s nmp no tify 2-566 set sn mp rmon 2-567 set sn mp rmon me mor.
Cont ent s xvi Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 8.1 78-15474-01 set s pan tree po rtfast bpdu-f ilter 2-619 set s pan tree po rtfast bpdu-g uard 2 -620 set span tree po rtin.
Content s xvii Catalyst 6500 Series Switch Command Reference—Release 8.1 78-15474-01 set time zone 2 -668 set tr affi c m onit or 2 -669 set trunk 2- 670 set u dld 2-673 set u dld a ggr essiv e-m od.
Cont ent s xviii Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 8.1 78-15474-01 show chann elpr oto col 2 -731 show chan nel traf fic 2-732 show conf ig 2-733 show conf ig mode 2- 739 sho.
Content s xix Catalyst 6500 Series Switch Command Reference—Release 8.1 78-15474-01 show imag em ib 2-791 show inte rfac e 2-792 show ip ali as 2-794 show ip dn s 2-795 show ip ht tp 2-79 7 show ip .
Cont ent s xx Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 8.1 78-15474-01 show mls exc lude prot ocol 2-858 show mls m ultic ast 2-8 59 show mls nde 2-863 show mls net flow-ro ute 2-86.
Content s xxi Catalyst 6500 Series Switch Command Reference—Release 8.1 78-15474-01 show port flowcontr ol 2-936 show port inlinep ower 2-938 show port jum bo 2-940 show port l2pro to col-t un nel 2.
Cont ent s xxii Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 8.1 78-15474-01 show qos in fo 2-998 show qos mac- cos 2-100 4 show qos maps 2-1006 show qos pol icer 2-1009 show qos pol ic.
Content s xxiii Catalyst 6500 Series Switch Command Reference—Release 8.1 78-15474-01 show snmp rmon memory 2 -1059 show snmp ta rget addr 2-106 0 show snmp ta rget param s 2 -1062 show snmp use r 2.
Cont ent s xxiv Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 8.1 78-15474-01 show time 2-1131 show timez one 2-113 2 show top 2-1133 show top re port 2-1135 show traf fic 2-1137 show tr.
Content s xxv Catalyst 6500 Series Switch Command Reference—Release 8.1 78-15474-01 unset= varna me 2-1185 var name = 2-1186 veri fy 2-1187 wait 2-1188 whichbo ot 2-1189 write 2-1190 write te ch-su .
Cont ent s xxvi Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 8.1 78-15474-01.
xxvii Catalyst 6500 Series Switch Command Reference—Release 8.1 78-15474-01 Preface This pr efa ce d escri b es t he a udie nce, o rganizatio n, an d co nv entions o f thi s pu bli cati on and p rovid es information on how to obtain relate d documentation.
xxvii i Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 8.1 78-15474-01 Preface Conv ent ions • System Message Guid e—Cata lyst 6500 Serie s, 4000 F am ily , Catalyst 2948G, and Cataly.
xxix Catalyst 6500 Series Switch Command Reference—Release 8.1 78-15474-01 Pre face Obtaining Docume ntation Notes us e the follo win g con v ention s: Note Means r e ader t ak e note . Notes contain helpf ul suggestions or reference s to material not co vered in the publica tion.
xxx Catalyst 6500 S eries Switch C o mmand Reference —Release 8.1 78-15474-01 Preface Obtain in g Technical Assis ta nce Ordering Docume ntation Y ou can find ins tr uct ions for orde ring do cu me nta tion a t t his U RL: http://www .cisco.co m/uni verc d/cc/td/doc/e s_inpck/pdi.
xxxi Catalyst 6500 Series Switch Command Reference—Release 8.1 78-15474-01 Pre face Ob ta ining Additional Publications and Information Opening a T AC Cas e The onlin e T AC Case Open T ool ( http://www .cisco.co m/tac/ca seopen ) is the fastest way to open P3 and P4 cases.
xxxii Catalyst 6500 S eries Switch C o mmand Reference —Release 8.1 78-15474-01 Preface Obtainin g Addi ti ona l Publicat io ns and Info rmatio n • Pack et magazine is the Cisco quarterl y publica.
C HA PTER 1-1 Catalyst 6500 Series Switch Command Refer e nce—Release 8.1 78-15474-01 1 Command-Line Interface s This chapt er desc ribes the c ommand- line inte rfaces (CL I) av ailab le on the Cat.
1-2 Catalyst 6500 S eries Switch C o mmand Reference —Release 8.1 78-15474-01 Chapte r 1 Command -Line Interf aces Switch CLI Note EI A/TIA- 232 was known as RS-232 before its accepta nce as a standa rd by the Electron ic Indust ries Alliance and T elecommunicatio ns Industry Associat io n.
1-3 Catalyst 6500 Series Switch Command Refer e nce—Release 8.1 78-15474-01 Chapter 1 Command-L in e Interfaces Switch CLI After con ne cting thr ough a T elne t se ssion, you see th is di splay: host% telnet cat6000-1.cisco.com Trying 172.16.44.30 .
1-4 Catalyst 6500 S eries Switch C o mmand Reference —Release 8.1 78-15474-01 Chapte r 1 Command -Line Interf aces Switch CLI Using the Command-Line Editing Features Catalyst 650 0 seri es swit ch s oft ware i ncl udes an enha nce d e diti ng mode tha t p rovides a set of e dit ing ke y f u nc tions simil ar to th ose of the Emac s ed ito r .
1-5 Catalyst 6500 Series Switch Command Refer e nce—Release 8.1 78-15474-01 Chapter 1 Command-L in e Interfaces Switch CLI In the follo wing e xample, when you enter the letter s conf and press the .
1-6 Catalyst 6500 S eries Switch C o mmand Reference —Release 8.1 78-15474-01 Chapte r 1 Command -Line Interf aces Switch CLI Deleti ng Entries Perform on e of thes e tasks to delete command e ntrie.
1-7 Catalyst 6500 Series Switch Command Refer e nce—Release 8.1 78-15474-01 Chapter 1 Command-L in e Interfaces Switch CLI Redisplayi ng the Current Command Line If you ente r a comma nd and the syst em suddenl y sends a message to your scre en, you can recall you r curr ent co mman d line en tr y .
1-8 Catalyst 6500 S eries Switch C o mmand Reference —Release 8.1 78-15474-01 Chapte r 1 Command -Line Interf aces Switch CLI Using Command Aliases Like regular com mands , alia ses are no t case se nsitive. Ho we ver , unlike regular command s, some aliases cannot be abbreviat ed.
1-9 Catalyst 6500 Series Switch Command Refer e nce—Release 8.1 78-15474-01 Chapter 1 Command-L in e Interfaces Switch CLI Accessing Command He lp T o see a list of top-le vel comma nds and comm and cate gories, type help in norma l or pri vile ged mode .
1-10 Catalyst 6500 S eries Switch C o mmand Reference —Release 8.1 78-15474-01 Chapte r 1 Command -Line Interf aces Switch CLI session Tunnel to ATM or Router module set Set commands, use 'set .
1-11 Catalyst 6500 Series Switch Command Refer e nce—Release 8.1 78-15474-01 Chapter 1 Command-L in e Interfaces Switch CLI Y ou can designat e ports by entering th e modu le and por t numbe r pairs, separat ed by commas . T o spe cify a rang e of po rts, use a d as h ( -) bet wee n the mo dule n umb er and po rt n umb er p airs .
1-12 Catalyst 6500 S eries Switch C o mmand Reference —Release 8.1 78-15474-01 Chapte r 1 Command -Line Interf aces Switch CLI Using Command Self-Repeat Use the com mand self -r epea t functi on to display matches to all possible keywords if a st ri ng repres ents a unique match.
1-13 Catalyst 6500 Series Switch Command Refer e nce—Release 8.1 78-15474-01 Chapter 1 Command-L in e Interfaces Switch CLI Using the CL I String Search The pat tern in the comm and output is refer red to as a str ing.
1-14 Catalyst 6500 S eries Switch C o mmand Reference —Release 8.1 78-15474-01 Chapte r 1 Command -Line Interf aces Switch CLI T o enter th ese special ch aracters as sing le-chara cter pattern s, remov e the special m eaning b y preceding each ch aracter with a backsl ash ().
1-15 Catalyst 6500 Series Switch Command Refer e nce—Release 8.1 78-15474-01 Chapter 1 Command-L in e Interfaces Switch CLI Multiple- Character Pat terns When crea ting re gular e xpressions, you can also sp ecify a pattern containing m ultiple c h aracters .
1-16 Catalyst 6500 S eries Switch C o mmand Reference —Release 8.1 78-15474-01 Chapte r 1 Command -Line Interf aces Switch CLI T o use multiplier s with multiple-char acter patterns, you encl ose the pattern in parenth e ses.
1-17 Catalyst 6500 Series Switch Command Refer e nce—Release 8.1 78-15474-01 Chapter 1 Command-L in e Interfaces ROM Moni tor CLI For exam pl e: _1300_ matc hes any stri ng that has 1300 somew here in t he str ing. Th e string ’ s 1300 ca n be preced ed by or end with a spa ce, brace, or co mma.
1-18 Catalyst 6500 S eries Switch C o mmand Reference —Release 8.1 78-15474-01 Chapte r 1 Command -Line Interf aces ROM Moni to r CLI The manu al bo ot command ha s the following syntax: Note En te r t he copy file-id { tftp | flash | fil e- id } co mma nd to obt ai n an ima ge f ro m t h e ne twork .
C HA PTER 2-1 Catalyst 6500 Series Switch Command Refer e nce—Release 8.1 78-15474-01 2 Catalyst 6500 Series Switch and ROM Monitor Commands This chap ter co ntain s an alpha betica l listin g of all switc h and R OM monitor comman ds a v ail abl e on the Catalyst 6500 series switches.
2-2 Catalyst 6500 S eries Switch C o mmand Reference —Release 8.1 78-15474-01 Chapter 2 Cataly st 6500 S eries Switch and ROM Monitor Commands alias alias T o set and display command aliases, use the alias command. alias [ name = value ] Syntax D escr i pti on Defaults Thi s command has no de fault setti ngs.
2-3 Catalyst 6500 Series Switch Command Refer e nce—Release 8.1 78-15474-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s alias k=stack s=set rommon 4 > s PS1=rommon ! &g.
2-4 Catalyst 6500 S eries Switch C o mmand Reference —Release 8.1 78-15474-01 Chapter 2 Catalyst 6500 Series Switch an d ROM Monitor Commands boot boot T o b oot up an extern al proc es s, use t he boot co mman d. boot [ -x ] [ -v ] [ device : ][ imagename ] Syntax D escr i pti on Defaults Thi s command has no de fault setti ngs.
Chapter 2 Ca talyst 6 500 Series Swi tch and ROM M onitor Comm ands cd 2-5 Catalyst 6500 Series Switch Command Refer e nce—Release 8.1 78-15474-01 22 cd T o s et the default Fla sh device for t he sy stem , use t he cd comm and. cd [[ m/ ] de vice : ] Syntax Descript ion Defaults The de fault Flash device is bootfl ash.
2-6 Catalyst 6500 S eries Switch C o mmand Reference —Release 8.1 78-15474-01 Chapter 2 Catalyst 6500 Series Switch an d ROM Monitor Commands clear acl lo g clear acllog T o disable A CL log rate limiting, use the cl ear ac llog command. clear ac llog Syntax D escr i pti on This comm a nd ha s n o argume nts or keyword s.
2-7 Catalyst 6500 Series Switch Command Refer e nce—Release 8.1 78-15474-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s clea r al i as clear alias T o clear the ab brevia ted versio ns of commands, use the clear alia s comman d.
2-8 Catalyst 6500 S eries Switch C o mmand Reference —Release 8.1 78-15474-01 Chapter 2 Catalyst 6500 Series Switch an d ROM Monitor Commands clear arp clear arp T o delete a specif ic entry or all entries from the ARP table , use the cl ear arp command.
2-9 Catalyst 6500 Series Switch Command Refer e nce—Release 8.1 78-15474-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s clea r banner m otd clear banner motd T o cl ear the m essag e- of-t he-da y banne r, use th e clear banner motd command .
2-10 Catalyst 6500 S eries Switch C o mmand Reference —Release 8.1 78-15474-01 Chapter 2 Catalyst 6500 Series Switch an d ROM Monitor Commands clear boot aut o-config clear boot auto-conf ig T o cle.
2-11 Catalyst 6500 Series Switch Command Refer e nce—Release 8.1 78-15474-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s clear boot dev ice clear boot device T o clear the conten ts of the CONFIG _FILE envir onment variable used to specify the NAM startup configuratio n files, use the clea r boot device comma nd .
2-12 Catalyst 6500 S eries Switch C o mmand Reference —Release 8.1 78-15474-01 Chapter 2 Catalyst 6500 Series Switch an d ROM Monitor Commands clear boot sy stem clear boot system T o cl ear the con ten ts of the B OOT envi ronm en t va ria ble a nd t he c onf igur ati on regi ster set ting, u se the clear boo t system com mand.
2-13 Catalyst 6500 Series Switch Command Refer e nce—Release 8.1 78-15474-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s clear c am clear cam T o delete a specif ic entry or all entries from the CAM table, use the clea r cam command .
2-14 Catalyst 6500 S eries Switch C o mmand Reference —Release 8.1 78-15474-01 Chapter 2 Catalyst 6500 Series Switch an d ROM Monitor Commands clear cam no tificat io n clear cam notification T o clear th e CAM notif icati on counter s and hi story log, use the cl ear cam notif ication comman d.
2-15 Catalyst 6500 Series Switch Command Refer e nce—Release 8.1 78-15474-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s clear channel st atisti cs clear channel sta tistics T o clear P AgP statis tical info rmation, u se the clear cha nnel statistic s co mman d.
2-16 Catalyst 6500 S eries Switch C o mmand Reference —Release 8.1 78-15474-01 Chapter 2 Catalyst 6500 Series Switch an d ROM Monitor Commands clear conf i g clear config T o clear the system or module conf iguration information store d in NVRAM, use the clear c onf ig comm and.
2-17 Catalyst 6500 Series Switch Command Refer e nce—Release 8.1 78-15474-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s clear config Module 1 configuration cleared.
2-18 Catalyst 6500 S eries Switch C o mmand Reference —Release 8.1 78-15474-01 Chapter 2 Catalyst 6500 Series Switch an d ROM Monitor Commands clear conf i g pvlan clear config pvlan T o cle ar all priv ate VL AN configurat ions in the syst em inclu ding por t mappi ngs, use the clea r co nfig pvlan comm and.
2-19 Catalyst 6500 Series Switch Command Refer e nce—Release 8.1 78-15474-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s clea r co ps clear cops T o cl ear Comm on Op en Po licy Se rvi ce ( CO PS) co nfigurat ions, us e t he c lea r cops comman d.
2-20 Catalyst 6500 S eries Switch C o mmand Reference —Release 8.1 78-15474-01 Chapter 2 Catalyst 6500 Series Switch an d ROM Monitor Commands clear cops This example shows how to clear al l COPS ser vers: Console> (enable) clear cops server all All COPS servers cleared.
2-21 Catalyst 6500 Series Switch Command Refer e nce—Release 8.1 78-15474-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s clea r count ers clear counters T o cle ar MAC counters, Ethe rCh annel MAC counters , port count ers , and t he cha nn el tra ffi c perc en tile , use the clea r counters co mmand.
2-22 Catalyst 6500 S eries Switch C o mmand Reference —Release 8.1 78-15474-01 Chapter 2 Catalyst 6500 Series Switch an d ROM Monitor Commands clear cry pto key rsa clear crypto key rsa T o remov e all RSA public-ke y pairs, use the clea r crypto k ey rsa comman d.
2-23 Catalyst 6500 Series Switch Command Refer e nce—Release 8.1 78-15474-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s clear dot1x con fig clear dot1x config T o disable dot1x on all ports and return v alues to the default settings, u se the clear dot 1x conf ig comm and.
2-24 Catalyst 6500 S eries Switch C o mmand Reference —Release 8.1 78-15474-01 Chapter 2 Catalyst 6500 Series Switch an d ROM Monitor Commands clear ftp clear ftp T o clea r File T ransf er Protocol (FTP) param eters, use the c lear ftp co mmand.
2-25 Catalyst 6500 Series Switch Command Refer e nce—Release 8.1 78-15474-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s clear gmr p statistics clear gmrp statistics T o clear all the GMRP stati s tics infor ma tion f rom a specif ied VLAN or all VLA Ns, use th e clear gmrp statistics command.
2-26 Catalyst 6500 S eries Switch C o mmand Reference —Release 8.1 78-15474-01 Chapter 2 Catalyst 6500 Series Switch an d ROM Monitor Commands clear gvr p stat is ti cs clear gvrp s tatistics T o clear all the GVRP statis tics info rmation , use the clea r gvrp stati stics com mand.
2-27 Catalyst 6500 Series Switch Command Refer e nce—Release 8.1 78-15474-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s clear i gmp statist ics clear igmp statistics T o cl ear IGMP snoopi ng stati sti cal in form a tion, use the clear igmp statistics command.
2-28 Catalyst 6500 S eries Switch C o mmand Reference —Release 8.1 78-15474-01 Chapter 2 Catalyst 6500 Series Switch an d ROM Monitor Commands clear ip ali as clear ip alias T o clear IP al iases that were s et using the set ip alias command , use the clear ip alias command .
2-29 Catalyst 6500 Series Switch Command Refer e nce—Release 8.1 78-15474-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s clear ip dns domain clear ip dns domai n T o clear the de fault DNS domain na me, use the clear ip dns domain command.
2-30 Catalyst 6500 S eries Switch C o mmand Reference —Release 8.1 78-15474-01 Chapter 2 Catalyst 6500 Series Switch an d ROM Monitor Commands clear ip dn s server clear ip dns server T o remov e a DNS s erver from the DNS serv er listing, use the clea r ip dns server comm and.
2-31 Catalyst 6500 Series Switch Command Refer e nce—Release 8.1 78-15474-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s clear ip pe rmi t clear ip permit T o remov e a specified IP address and mask or all IP addresses and masks from the permit list, use the clear ip permit comman d.
2-32 Catalyst 6500 S eries Switch C o mmand Reference —Release 8.1 78-15474-01 Chapter 2 Catalyst 6500 Series Switch an d ROM Monitor Commands clear ip pe rm i t Console> (enable) clear ip permit all IP permit list cleared. WARNING IP permit list is still enabled.
2-33 Catalyst 6500 Series Switch Command Refer e nce—Release 8.1 78-15474-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s clear i p route clear ip route T o delete IP routi n g table entries, use the clear ip r oute comma nd.
2-34 Catalyst 6500 S eries Switch C o mmand Reference —Release 8.1 78-15474-01 Chapter 2 Catalyst 6500 Series Switch an d ROM Monitor Commands clear kerb eros clie nts m and atory clear kerberos clients ma ndatory T o disable mandatory Kerb eros authentica tion for services on the network, use the clear k erberos clients mandatory comm and.
2-35 Catalyst 6500 Series Switch Command Refer e nce—Release 8.1 78-15474-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s clea r ke rber os cred e nti a ls for w ard clear kerberos creden tials forward T o disa ble credent ials forw arding, u se the clea r kerber os credent ials f orward command.
2-36 Catalyst 6500 S eries Switch C o mmand Reference —Release 8.1 78-15474-01 Chapter 2 Catalyst 6500 Series Switch an d ROM Monitor Commands clear kerb eros cre ds clear kerberos creds T o de lete all t he Ke rberos cr edentials, u se the clear ke rbero s creds command.
2-37 Catalyst 6500 Series Switch Command Refer e nce—Release 8.1 78-15474-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s clear ker ber os re alm clear kerberos realm T o clear a n entry t hat m aps th e nam e of a K erb eros rea lm to a D NS domai n name or a hos t na me , use the clea r k er beros rea lm command.
2-38 Catalyst 6500 S eries Switch C o mmand Reference —Release 8.1 78-15474-01 Chapter 2 Catalyst 6500 Series Switch an d ROM Monitor Commands clear kerb eros se rv er clear kerberos server T o clea r a s pecifi ed K ey D istrib ution Cent er (KDC) entry , use the clear k erber os server command.
2-39 Catalyst 6500 Series Switch Command Refer e nce—Release 8.1 78-15474-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s clea r key conf i g-k e y clear key config-key T o remo ve a pri vate 3DE S key , use the clear ke y config-key command .
2-40 Catalyst 6500 S eries Switch C o mmand Reference —Release 8.1 78-15474-01 Chapter 2 Catalyst 6500 Series Switch an d ROM Monitor Commands clear l2prot ocol- tun nel cos clear l2protoco l-tunnel c os T o cl ear the L a yer 2 p rotoc ol tunne ling CoS value fo r all i ng ress tu nne ling por ts, use the c lea r l2protocol-tunnel c os command.
2-41 Catalyst 6500 Series Switch Command Refer e nce—Release 8.1 78-15474-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s clear l2pr oto c ol- tunn el s t atis t ics clear .
2-42 Catalyst 6500 S eries Switch C o mmand Reference —Release 8.1 78-15474-01 Chapter 2 Catalyst 6500 Series Switch an d ROM Monitor Commands clear lac p-ch annel st ati st i cs clear lacp-channel statistic s T o clea r Link Aggr egation Control Protocol (LA CP) statistical informa tion, use the clear lacp-channe l statistics command.
2-43 Catalyst 6500 Series Switch Command Refer e nce—Release 8.1 78-15474-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s clear lda clear lda T o remove the ac celerated server lo ad balancin g (ASLB ) MLS entries or MA C addresses from the swit ch, use the cl ear lda comman d.
2-44 Catalyst 6500 S eries Switch C o mmand Reference —Release 8.1 78-15474-01 Chapter 2 Catalyst 6500 Series Switch an d ROM Monitor Commands clear lda Usage Guid el i nes This c omm and is suppor ted on ly o n sw itc he s configu red w ith th e Supe r visor En gine 1 wi th L aye r 3 Switching Engine WS-F6K-PFC (Pol icy Feature Card) .
2-45 Catalyst 6500 Series Switch Command Refer e nce—Release 8.1 78-15474-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s clea r lo ca luse r clear localuser T o delete a loca l user a ccount f rom the switch, use the clear localus er command.
2-46 Catalyst 6500 S eries Switch C o mmand Reference —Release 8.1 78-15474-01 Chapter 2 Catalyst 6500 Series Switch an d ROM Monitor Commands clear log clear log T o delet e module , system error log, or dump l og entri es, use the clea r log co mmand .
2-47 Catalyst 6500 Series Switch Command Refer e nce—Release 8.1 78-15474-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s clear log comma nd clear log comma nd T o clear the command log entry table, u s e t h e clear log command co mmand.
2-48 Catalyst 6500 S eries Switch C o mmand Reference —Release 8.1 78-15474-01 Chapter 2 Catalyst 6500 Series Switch an d ROM Monitor Commands clear log gi ng buffer clear loggi ng buffer T o clear the s ystem logg ing bu f f er , use the clea r loggin g buffe r comma nd.
2-49 Catalyst 6500 Series Switch Command Refer e nce—Release 8.1 78-15474-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s clear logging callhome clear logging cal lhome T o retore the CallHome def ault values or to clea r a d estination addr ess used in the CallHom e feature, use the clea r logging destination co mmand .
2-50 Catalyst 6500 S eries Switch C o mmand Reference —Release 8.1 78-15474-01 Chapter 2 Catalyst 6500 Series Switch an d ROM Monitor Commands clear log gi ng callhom e Relat e d Commands clear logg.
2-51 Catalyst 6500 Series Switch Command Refer e nce—Release 8.1 78-15474-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s clear logg ing cal lhome from clear loggi ng callhome fro m T o clear the Fro m address used by the Call Home featu re, use the clear logging from comm and.
2-52 Catalyst 6500 S eries Switch C o mmand Reference —Release 8.1 78-15474-01 Chapter 2 Catalyst 6500 Series Switch an d ROM Monitor Commands clear log ging call hom e reply- to clear loggi ng callhome re ply-to T o clea r the R eply- to address u sed by the CallHome featur e, use the clear logg i ng reply- to command.
2-53 Catalyst 6500 Series Switch Command Refer e nce—Release 8.1 78-15474-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s clear logging callhome severity clear logging cal .
2-54 Catalyst 6500 S eries Switch C o mmand Reference —Release 8.1 78-15474-01 Chapter 2 Catalyst 6500 Series Switch an d ROM Monitor Commands clear log gi ng callhome smtp-s erv er clear logging cal lhome smtp -server T o clear an SMTP ser ver from the list of CallHome SMTP serv ers, use the clea r logging smt p-ser ver comm and.
2-55 Catalyst 6500 Series Switch Command Refer e nce—Release 8.1 78-15474-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s clear loggi ng level clear logging leve l T o reset the logging le vel for a fa cility or for all f acilities to thei r default settings, u se the cl ear loggi ng lev el command.
2-56 Catalyst 6500 S eries Switch C o mmand Reference —Release 8.1 78-15474-01 Chapter 2 Catalyst 6500 Series Switch an d ROM Monitor Commands clear log ging leve l Defaults Thi s command has no de fault setti ngs. Comma nd T ypes Swit ch co mman d.
2-57 Catalyst 6500 Series Switch Command Refer e nce—Release 8.1 78-15474-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s clear logging server clear logging server T o delete a syslog serve r from the system log serv er table, use the cl ear logg ing ser ver comm and.
2-58 Catalyst 6500 S eries Switch C o mmand Reference —Release 8.1 78-15474-01 Chapter 2 Catalyst 6500 Series Switch an d ROM Monitor Commands clear mls cef clear mls cef T o cl ear Cisco Ex pre ss Forwarding ( CEF) su mmar y s tat ist ics, us e the clear mls cef co mmand.
2-59 Catalyst 6500 Series Switch Command Refer e nce—Release 8.1 78-15474-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s clear mls cef rpf statistics clear mls cef rpf statistics To clear the coun ters for packets and bytes that failed the hardware RPF check, us e the clear mls cef rpf statist ics command.
2-60 Catalyst 6500 S eries Switch C o mmand Reference —Release 8.1 78-15474-01 Chapter 2 Catalyst 6500 Series Switch an d ROM Monitor Commands clear mls ent ry clear mls entry T o clea r MLS entr ies in the Cata lyst 6500 se ries switches , use the clear mls entr y command.
2-61 Catalyst 6500 Series Switch Command Refer e nce—Release 8.1 78-15474-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s clea r ml s ent ry Up to 16 routers can be included e xplicitly as MLS-RPs.
2-62 Catalyst 6500 S eries Switch C o mmand Reference —Release 8.1 78-15474-01 Chapter 2 Catalyst 6500 Series Switch an d ROM Monitor Commands clear mls entry cef clear mls entry ce f T o clear CEF adjac ency statisti cs, use the clea r mls entry cef command.
2-63 Catalyst 6500 Series Switch Command Refer e nce—Release 8.1 78-15474-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s clear ml s exclude pr otocol clear mls exclude pro.
Chapter 2 Ca talyst 6 500 Series Swi tch and ROM M onitor Comm ands clear mls multicast statistics 2-64 Catalyst 6500 Series Switch Command Refer e nce—Release 8.1 78-15474-01 22 clear mls multicast statistics T o remov e ML S multicast sta tistics main tained b y the MSFC o n the switc h, use the clea r mls multicast statistics command .
2-65 Catalyst 6500 Series Switch Command Refer e nce—Release 8.1 78-15474-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s clear mls nd e flow clear mls nde flow T o reset t he NDE f ilters in the Catalyst 6500 se ries switch es, use t he clear mls nde flow com mand.
2-66 Catalyst 6500 S eries Switch C o mmand Reference —Release 8.1 78-15474-01 Chapter 2 Catalyst 6500 Series Switch an d ROM Monitor Commands clear m ls st atistics clear mls statistics T o clear har d ware-in stalled MLS statistics entries, u se the clea r mls statis tics comm and.
2-67 Catalyst 6500 Series Switch Command Refer e nce—Release 8.1 78-15474-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s clear mls st atistics This exampl e shows ho w t o.
2-68 Catalyst 6500 S eries Switch C o mmand Reference —Release 8.1 78-15474-01 Chapter 2 Catalyst 6500 Series Switch an d ROM Monitor Commands clear m ls st atistics entry clear mls statistics en try T o clear statistics for MLS entries, use the clea r mls s tatist ics entr y command.
2-69 Catalyst 6500 Series Switch Command Refer e nce—Release 8.1 78-15474-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s clear ml s statist ics entry When en ter ing th e IPX ad dress s yntax, us e the fol lowing form at: • IPX net address—1.
2-70 Catalyst 6500 S eries Switch C o mmand Reference —Release 8.1 78-15474-01 Chapter 2 Catalyst 6500 Series Switch an d ROM Monitor Commands clear m odu le pass w ord clear module pa ssword T o clear the password set by the password [ usernam e ] N AM command, us e the cl ear m odu le pa sswor d comm and.
2-71 Catalyst 6500 Series Switch Command Refer e nce—Release 8.1 78-15474-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s clear multicast router clear multicast router T o clear manual ly config ured multicast rout er ports from the multic ast router port list, use the clea r multicast r outer command.
2-72 Catalyst 6500 S eries Switch C o mmand Reference —Release 8.1 78-15474-01 Chapter 2 Catalyst 6500 Series Switch an d ROM Monitor Commands clear ntp ser ver clear ntp server T o r e move one or m ore s erver s f rom th e NT P s erver ta ble, u s e t he c lear n tp server command.
2-73 Catalyst 6500 Series Switch Command Refer e nce—Release 8.1 78-15474-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s clea r nt p tim ez one clear ntp timezone T o return the time zo ne to its default, UTC, use the clear ntp timezone command.
2-74 Catalyst 6500 S eries Switch C o mmand Reference —Release 8.1 78-15474-01 Chapter 2 Catalyst 6500 Series Switch an d ROM Monitor Commands clear pbf clear pbf T o remo ve the MA C address fo r the PFC2, use th e clear pbf command . clear pbf Syntax D escr i pti on This comm a nd ha s n o keywords or argume nts.
2-75 Catalyst 6500 Series Switch Command Refer e nce—Release 8.1 78-15474-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s clear pbf-map clear pbf-map T o clear PBF map infor mation, use the cl ear p bf-ma p command .
2-76 Catalyst 6500 S eries Switch C o mmand Reference —Release 8.1 78-15474-01 Chapter 2 Catalyst 6500 Series Switch an d ROM Monitor Commands clear pbf -m ap This e xample sho ws h o w to clear all.
2-77 Catalyst 6500 Series Switch Command Refer e nce—Release 8.1 78-15474-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s clear pbf vlan clear pbf vlan T o clear PBF-e nabled VLANs and re mov e them from NVRAM, u se the clea r pbf vlan co mmand.
2-78 Catalyst 6500 S eries Switch C o mmand Reference —Release 8.1 78-15474-01 Chapter 2 Catalyst 6500 Series Switch an d ROM Monitor Commands clear port broa dcast clear port broadca st T o disable broadcas t/multicast suppression on one or more ports, use the clear port br oa dcast comm and.
2-79 Catalyst 6500 Series Switch Command Refer e nce—Release 8.1 78-15474-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s clear po rt cops clear port cops T o clear por t roles, use the clear port cops comman d. clear por t cops mod / po rt ro le s ro l e 1 [ ro l e 2 ].
2-80 Catalyst 6500 S eries Switch C o mmand Reference —Release 8.1 78-15474-01 Chapter 2 Catalyst 6500 Series Switch an d ROM Monitor Commands clear port hos t clear port host T o cle ar the port co nfigurati on for opti mizing a hos t connec tion, use the clear port host comm and.
2-81 Catalyst 6500 Series Switch Command Refer e nce—Release 8.1 78-15474-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s clear port qos cos clear port qos cos T o return the v alues set by the set port qos cos command to the d efault settings for all specified ports, use the clea r port qo s cos co mmand.
2-82 Catalyst 6500 S eries Switch C o mmand Reference —Release 8.1 78-15474-01 Chapter 2 Catalyst 6500 Series Switch an d ROM Monitor Commands clear port se curity clear port security T o clear al l MA C addresses o r a s peci fic MA C addr es s fr o m th e lis t of s ecure MA C addresses o n a p o rt, use the clea r port securit y command.
2-83 Catalyst 6500 Series Switch Command Refer e nce—Release 8.1 78-15474-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s clear pvla n mapping clear pvlan mapping T o d ele te a pr ivate VLAN ma ppin g, use t h e clear pvlan mapping command.
2-84 Catalyst 6500 S eries Switch C o mmand Reference —Release 8.1 78-15474-01 Chapter 2 Catalyst 6500 Series Switch an d ROM Monitor Commands clear qos acl clear qos acl T o remo ve v arious A CL conf igur ation s, use the clear qos ac l comman d.
2-85 Catalyst 6500 Series Switch Command Refer e nce—Release 8.1 78-15474-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s clea r qos acl Exam ples This e xample sho ws ho w to detach an A C L fr om all int erfaces: Console> (enable) clear qos acl map my_acl all Hardware programming in progress.
2-86 Catalyst 6500 S eries Switch C o mmand Reference —Release 8.1 78-15474-01 Chapter 2 Catalyst 6500 Series Switch an d ROM Monitor Commands clear qos conf ig clear qos config T o the default setting s and delete the CoS assigned to MAC addresses, use the clea r qos conf ig comm and to retur n the valu es set by t he set qos com mand .
2-87 Catalyst 6500 Series Switch Command Refer e nce—Release 8.1 78-15474-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s clear qos cos-dscp -map clear qos cos-dsc p-map To clear CoS-to-DSCP mappin g set by the set qos cos- dscp-map command and return to the default setting, u se the c lea r qos co s-ds cp-m ap command .
2-88 Catalyst 6500 S eries Switch C o mmand Reference —Release 8.1 78-15474-01 Chapter 2 Catalyst 6500 Series Switch an d ROM Monitor Commands clear qos dscp-c os- map clear qos dscp-c os-map To cl .
2-89 Catalyst 6500 Series Switch Command Refer e nce—Release 8.1 78-15474-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s clear q os dscp-mut ation-ta ble-map clear qos dscp-mutati on-table-ma p T o clear the DSC P mutation tabl e map, use the clear qos dscp-mutation-tabl e-map command .
2-90 Catalyst 6500 S eries Switch C o mmand Reference —Release 8.1 78-15474-01 Chapter 2 Catalyst 6500 Series Switch an d ROM Monitor Commands clear qos ipp rec-ds cp-m ap clear qos ipprec -dscp-map T o reset the m apping set b y the set qos ippr ec-dscp-map command to t h e default set ting, use t he clea r qos ippre c-dscp-map comm and.
2-91 Catalyst 6500 Series Switch Command Refer e nce—Release 8.1 78-15474-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s clear q os mac-cos clear qos mac-c os T o clear the v alues set by the set qos mac-cos command, use the clear qos m ac-cos co mmand.
2-92 Catalyst 6500 S eries Switch C o mmand Reference —Release 8.1 78-15474-01 Chapter 2 Catalyst 6500 Series Switch an d ROM Monitor Commands clear qos m ap clear qos map T o return the v alues to the default settin gs, use the clear qos map comm and.
2-93 Catalyst 6500 Series Switch Command Refer e nce—Release 8.1 78-15474-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s clea r qo s map Relat e d Commands set qos map sho.
2-94 Catalyst 6500 S eries Switch C o mmand Reference —Release 8.1 78-15474-01 Chapter 2 Catalyst 6500 Series Switch an d ROM Monitor Commands clear qos pol iced-d sc p-m ap clear qos policed -dscp-map T o reset t h e police r-t o-dscp map ping tabl e to the defaults, use the cle a r qos p oliced-dscp-map .
2-95 Catalyst 6500 Series Switch Command Refer e nce—Release 8.1 78-15474-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s clear qos polic er clear qos policer T o clear poli cing rules from N VRA M , use th e clear qos policer command .
2-96 Catalyst 6500 S eries Switch C o mmand Reference —Release 8.1 78-15474-01 Chapter 2 Catalyst 6500 Series Switch an d ROM Monitor Commands clear qos pol icer This exam pl e sh ows how t o clear a specif ic aggre gate policing rule: Console> (enable) clear qos policer aggregate my_micro my_micro QoS microflow policer cleared.
2-97 Catalyst 6500 Series Switch Command Refer e nce—Release 8.1 78-15474-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s clear qo s statisti cs clear qos statistics T o clear QoS stati stic counte rs, use the clear qos sta tistics command.
2-98 Catalyst 6500 S eries Switch C o mmand Reference —Release 8.1 78-15474-01 Chapter 2 Catalyst 6500 Series Switch an d ROM Monitor Commands clear radi us clear radius T o clear one or all of t he RADIUS serv ers from th e RADIUS se rve r table o r remo ve a shar ed key e ntry , use the clear ra dius command.
2-99 Catalyst 6500 Series Switch Command Refer e nce—Release 8.1 78-15474-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s clea r rc p clear rcp T o clear rcp informa tion for file transfers, use the clear rcp co mmand. clea r rcp Syntax Descript ion This c omm and ha s no a rgume nts o r keywords.
2-100 Catalyst 6500 S eries Switch C o mmand Reference —Release 8.1 78-15474-01 Chapter 2 Catalyst 6500 Series Switch an d ROM Monitor Commands clear rgmp s tatistic s clear rgmp statistics T o clear RGMP s tatistics informati on for all VLANs, use the clear r gmp statist ics command.
2-101 Catalyst 6500 Series Switch Command Refer e nce—Release 8.1 78-15474-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s clear securit y acl clear security acl T o remove.
2-102 Catalyst 6500 S eries Switch C o mmand Reference —Release 8.1 78-15474-01 Chapter 2 Catalyst 6500 Series Switch an d ROM Monitor Commands clear sec urity acl Usage Guid el i nes Changes you make by enterin g this comm and are saved to NVRA M and hardware only af ter you en ter the commit command.
2-103 Catalyst 6500 Series Switch Command Refer e nce—Release 8.1 78-15474-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s clear security acl captu re-ports clear security acl captu re-ports T o r emove a po rt from the captur e port list, use the clear security acl ca pture - ports comman d.
2-104 Catalyst 6500 S eries Switch C o mmand Reference —Release 8.1 78-15474-01 Chapter 2 Catalyst 6500 Series Switch an d ROM Monitor Commands clear sec urity acl log flow clear security acl log flo w T o clea r all f lows in the security ACL log tabl e, use the clear s ecurity ac l log flow command.
2-105 Catalyst 6500 Series Switch Command Refer e nce—Release 8.1 78-15474-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s clear security acl map clear security acl map T o re move VAC L-to-VLA N mapping, use the clear securit y acl map comm and.
2-106 Catalyst 6500 S eries Switch C o mmand Reference —Release 8.1 78-15474-01 Chapter 2 Catalyst 6500 Series Switch an d ROM Monitor Commands clear sec urity acl m ap This e xample shows how to r emov e all VACL-to-VLAN mappings from a sp ecif ic VLAN: Console> (enable) clear security acl map 5 Map deletion in progress.
2-107 Catalyst 6500 Series Switch Command Refer e nce—Release 8.1 78-15474-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s clear snmp ac cess clear snmp access T o remove the acce ss rights of an SNMP gro up, use the clear sn mp acce ss comma n d.
2-108 Catalyst 6500 S eries Switch C o mmand Reference —Release 8.1 78-15474-01 Chapter 2 Catalyst 6500 Series Switch an d ROM Monitor Commands clear snm p access -list clear snmp acces s-list T o clear the IP ad dress of a host that is associated with an access list nu mber , use the clear sn mp access-list command.
2-109 Catalyst 6500 Series Switch Command Refer e nce—Release 8.1 78-15474-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s clea r s nm p co mm unit y clear snmp communit y T o clear an SNMP comm u nity table, use th e clear snmp community comm and .
2-110 Catalyst 6500 S eries Switch C o mmand Reference —Release 8.1 78-15474-01 Chapter 2 Catalyst 6500 Series Switch an d ROM Monitor Commands clear snm p commu nity-ex t clear snmp communit y-ex t T o clea r an e xisting commun ity string, use the clear snmp co mmunity-ext command.
2-111 Catalyst 6500 Series Switch Command Refer e nce—Release 8.1 78-15474-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s clea r s nm p gr oup clear snmp grou p T o remo ve the SNMP user fr om an SNMP group, use th e clea r snm p group co mmand.
2-112 Catalyst 6500 S eries Switch C o mmand Reference —Release 8.1 78-15474-01 Chapter 2 Catalyst 6500 Series Switch an d ROM Monitor Commands clear snm p ifalias clear snmp i falias T o clea r an SN MP interf ace alias, u se the cle ar snmp ifalias co mmand.
2-113 Catalyst 6500 Series Switch Command Refer e nce—Release 8.1 78-15474-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s clear snmp notify clear snmp notify T o clear the SNMP notify name in the snmpNotifyT able, use the clear snmp notify comm and.
2-114 Catalyst 6500 S eries Switch C o mmand Reference —Release 8.1 78-15474-01 Chapter 2 Catalyst 6500 Series Switch an d ROM Monitor Commands clear snm p target add r clear snmp targetadd r T o clear the SNMP tar get address entr y in the T arge tAddressT able, use the clear snmp tar getaddr comm and.
2-115 Catalyst 6500 Series Switch Command Refer e nce—Release 8.1 78-15474-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s clear sn mp targetp arams clear snmp targ etparams T o clear the SNMP tar get parameter s used in the snm pT arg etPar amsT able, use the c lear snmp target par am s com mand .
2-116 Catalyst 6500 S eries Switch C o mmand Reference —Release 8.1 78-15474-01 Chapter 2 Catalyst 6500 Series Switch an d ROM Monitor Commands clear snm p trap clear snmp t rap T o cl ear an en tr y from th e SNMP trap receiver tabl e, use t he clea r sn mp tra p command.
2-117 Catalyst 6500 Series Switch Command Refer e nce—Release 8.1 78-15474-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s clear sn m p use r clear snmp us er T o remo ve an SN MP user , use the c lear snmp user command.
2-118 Catalyst 6500 S eries Switch C o mmand Reference —Release 8.1 78-15474-01 Chapter 2 Catalyst 6500 Series Switch an d ROM Monitor Commands clear snm p view clear snmp vi ew T o remo ve the MIB vi ew entry fr om the vac mV iewT r eeFa milyT able, us e the clear s nmp view comm and.
2-119 Catalyst 6500 Series Switch Command Refer e nce—Release 8.1 78-15474-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s clear spantree de tected-prot ocols clear spantre.
2-120 Catalyst 6500 S eries Switch C o mmand Reference —Release 8.1 78-15474-01 Chapter 2 Catalyst 6500 Series Switch an d ROM Monitor Commands clear spa ntree ms t clear spantree mst T o clear the map ping of VLA Ns to an MST instanc e, use the clear s pantr ee mst comm and.
2-121 Catalyst 6500 Series Switch Command Refer e nce—Release 8.1 78-15474-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s clea r sp an tre e por tco s t clear spantree portc ost T o clear the po rt cost of a port on the s witch, use th e clea r spant ree por tcost comm and.
2-122 Catalyst 6500 S eries Switch C o mmand Reference —Release 8.1 78-15474-01 Chapter 2 Catalyst 6500 Series Switch an d ROM Monitor Commands clear spa ntree p ort instance cost clear spantree porti nstanceco st T o restore the def ault path cost to an instance on a port, use the clear s pantr ee portinstancecos t comm and.
2-123 Catalyst 6500 Series Switch Command Refer e nce—Release 8.1 78-15474-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s clear span tree portinstan cecost Relat e d Comma.
2-124 Catalyst 6500 S eries Switch C o mmand Reference —Release 8.1 78-15474-01 Chapter 2 Catalyst 6500 Series Switch an d ROM Monitor Commands clear spa ntree p ort instance pri clear spantree porti nstancepri T o restore the def ault path cost to an instance on a port, use the clear s pantr ee portinstanc epri comm and.
2-125 Catalyst 6500 Series Switch Command Refer e nce—Release 8.1 78-15474-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s clear spantree po rtpri clear spantree portp ri T o clear the port pr iority of a port on the switch, use the clear spant ree portpri co mmand .
2-126 Catalyst 6500 S eries Switch C o mmand Reference —Release 8.1 78-15474-01 Chapter 2 Catalyst 6500 Series Switch an d ROM Monitor Commands clear spa ntree p ortvlanc ost clear spantree portv lancost T o restore the def ault path cost to a VLAN on a port, use the clear span tree port vlanc ost command .
2-127 Catalyst 6500 Series Switch Command Refer e nce—Release 8.1 78-15474-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s clear sp an tre e por tvla nco st Usage Guid el i nes This command is valid in PVST+ mode only . If you do not spe cify a VL AN, a ll V LAN s ar e cle are d.
2-128 Catalyst 6500 S eries Switch C o mmand Reference —Release 8.1 78-15474-01 Chapter 2 Catalyst 6500 Series Switch an d ROM Monitor Commands clear spa ntree p ortvlanp ri clear spantree portv lanpri T o reset the spanning tree port VLAN prior ity , use the clear spant ree portvlanpri comm and.
2-129 Catalyst 6500 Series Switch Command Refer e nce—Release 8.1 78-15474-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s clear spantree r oot clear spantree root T o rest.
2-130 Catalyst 6500 S eries Switch C o mmand Reference —Release 8.1 78-15474-01 Chapter 2 Catalyst 6500 Series Switch an d ROM Monitor Commands clear spa ntree ro ot This e xample sho ws ho w to clear th e spannin g tree root on an instance: Console> (enable) clear spantree root mistp-instance 1 Instance 1 bridge priority set to 32768.
2-131 Catalyst 6500 Series Switch Command Refer e nce—Release 8.1 78-15474-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s clear sp antree stati stics clear spantree statistic s T o clear the s panning tree stat istics, use the clear s pant ree statis tics command.
2-132 Catalyst 6500 S eries Switch C o mmand Reference —Release 8.1 78-15474-01 Chapter 2 Catalyst 6500 Series Switch an d ROM Monitor Commands clear spa ntree sta tistics This e x ample sho ws how .
2-133 Catalyst 6500 Series Switch Command Refer e nce—Release 8.1 78-15474-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s clear spantree up linkfast clear spantree uplink .
2-134 Catalyst 6500 S eries Switch C o mmand Reference —Release 8.1 78-15474-01 Chapter 2 Catalyst 6500 Series Switch an d ROM Monitor Commands clear sy stem i nfo -log com mand clear system info-log command T o r emove a show comma nd fr om the sy stem i nform ation loggi ng index, use th e clear system inf o-log command comm and .
2-135 Catalyst 6500 Series Switch Command Refer e nce—Release 8.1 78-15474-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s clear ta cacs key clear tacacs key T o remov e the ke y setting used for T A CACS+ auth entication and encryp tion, use the clea r taca cs ke y comm and.
2-136 Catalyst 6500 S eries Switch C o mmand Reference —Release 8.1 78-15474-01 Chapter 2 Catalyst 6500 Series Switch an d ROM Monitor Commands clear tac acs se rve r clear tacacs serv er T o remo ve a host fr om the lis t of T A CA CS+ serv ers, use the clea r taca cs server comma nd.
2-137 Catalyst 6500 Series Switch Command Refer e nce—Release 8.1 78-15474-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s clear timezone clear timezone T o return the time zo ne to its default, UTC, use the clear ti mezone command .
2-138 Catalyst 6500 S eries Switch C o mmand Reference —Release 8.1 78-15474-01 Chapter 2 Catalyst 6500 Series Switch an d ROM Monitor Commands clear top clear top T o sto p the T opN process, use the clear top command. clear to p { all | r e port_nu m } Syntax D escr i pti on Defaults Thi s command has no de fault setti ngs.
2-139 Catalyst 6500 Series Switch Command Refer e nce—Release 8.1 78-15474-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s clea r tr un k clear trunk T o restore a trunk port to its defa u lt trunk type and mode or to clear specif ic VLANs from the allo wed VLAN list for a trunk port , use the clear trunk comman d.
2-140 Catalyst 6500 S eries Switch C o mmand Reference —Release 8.1 78-15474-01 Chapter 2 Catalyst 6500 Series Switch an d ROM Monitor Commands clear vl an clear vlan T o delete an ex isting VLAN from a manage ment domain or to clear VLANs that are secured b y a Fire wall Ser vices Module, use the cl ear vlan comm and.
2-141 Catalyst 6500 Series Switch Command Refer e nce—Release 8.1 78-15474-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s cle ar v lan Relat e d Commands set vlan show vla.
2-142 Catalyst 6500 S eries Switch C o mmand Reference —Release 8.1 78-15474-01 Chapter 2 Catalyst 6500 Series Switch an d ROM Monitor Commands clear vl an co unters clear vlan counte rs T o retu rn the so ftware- cache d counte rs to 0 for all VLANs, use the clear vl an co unte rs co mman d.
2-143 Catalyst 6500 Series Switch Command Refer e nce—Release 8.1 78-15474-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s clear vla n mapping clear vlan mapping T o dele te existing IEE E 802.1 Q VLAN-to- ISL VLAN mapping s or reserved-t o-nonre served VL AN mappin g, use the clear vlan mapping command.
2-144 Catalyst 6500 S eries Switch C o mmand Reference —Release 8.1 78-15474-01 Chapter 2 Catalyst 6500 Series Switch an d ROM Monitor Commands clear vm p s rcp clear vmps rcp T o delete the VMPS rcp user n ame from the VMPS serv er table, use the cl ear vmps rcp command .
2-145 Catalyst 6500 Series Switch Command Refer e nce—Release 8.1 78-15474-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s clear vmps server clear vmps server T o de lete a VMP S server from th e VMPS s erver table, use the clear vmps ser ver command .
2-146 Catalyst 6500 S eries Switch C o mmand Reference —Release 8.1 78-15474-01 Chapter 2 Catalyst 6500 Series Switch an d ROM Monitor Commands clear vm p s stat is ti cs clear vmps statistics T o delete exi sting VMPS statistics, use the clear vmps statisti cs command.
2-147 Catalyst 6500 Series Switch Command Refer e nce—Release 8.1 78-15474-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s clear vtp pruneel igible clear vtp pruneeligibl e T o specify which VLANs in the VTP domain are ine ligible f or pruning, use th e clear vt p prunee ligible comm and.
Chapter 2 Ca talyst 6 500 Series Swi tch and ROM M onitor Comm ands clear vtp statistic s 2-149 Catalyst 6500 Series Switch Command Refer e nce—Release 8.1 78-15474-01 2 clear vtp statistics T o delete VT P statistics, use the clear vtp st atistics comm and.
2-150 Catalyst 6500 Series Switch Command Refer e nce—Release 8.1 78-15474-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s comm it commit T o commit all A CEs or a specifi c A CE in NVRAM that has not been written to hardware, use the commit command .
2-151 Catalyst 6500 S eries Switch C o mmand Reference —Release 8.1 78-15474-01 Chapter 2 Catalyst 6500 Series Switch an d ROM Monitor Commands commit Relat e d Commands ro llback.
2-152 Catalyst 6500 Series Switch Command Refer e nce—Release 8.1 78-15474-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s commit lda commit lda T o commit ASLB c onfi g uration that ha s not been wri tten to hard ware to NV RAM, use the commit lda comm and.
2-153 Catalyst 6500 S eries Switch C o mmand Reference —Release 8.1 78-15474-01 Chapter 2 Catalyst 6500 Series Switch an d ROM Monitor Commands configu re configure T o download a c onfiguration file from an rcp se rver or the networ k and execute each c omman d in that fi le, use the c onfigur e command.
2-154 Catalyst 6500 Series Switch Command Refer e nce—Release 8.1 78-15474-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s configu re Exam ples Th is example shows how to do w n load the syste m5 .cfg configu ratio n file from the 192.
2-155 Catalyst 6500 S eries Switch C o mmand Reference —Release 8.1 78-15474-01 Chapter 2 Catalyst 6500 Series Switch an d ROM Monitor Commands confreg confreg T o conf ig ure the config uration reg ister utility , use the confr eg co mmand. confreg [ num ] Syntax D escr i pti on Defaults Thi s command has no de fault setti ngs.
2-156 Catalyst 6500 Series Switch Command Refer e nce—Release 8.1 78-15474-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s confr eg enter to boot: 0 = ROM Monitor 1 = the b.
2-157 Catalyst 6500 S eries Switch C o mmand Reference —Release 8.1 78-15474-01 Chapter 2 Catalyst 6500 Series Switch an d ROM Monitor Commands context context T o di splay the con text of a l oade d im age, use the context co mmand. cont ext Syntax D escr i pti on This comm a nd ha s n o argume nts or keyword s.
2-158 Catalyst 6500 Series Switch Command Refer e nce—Release 8.1 78-15474-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s cont ext a0 : 00000000 00000400 | s4 : 00000000 0.
2-159 Catalyst 6500 S eries Switch C o mmand Reference —Release 8.1 78-15474-01 Chapter 2 Catalyst 6500 Series Switch an d ROM Monitor Commands copy copy T o uploa d or download a Flash i ma ge or a swi t ch configur at ion to or fro m a Fla s h device, rcp server , or TFTP se rver, use t he copy comm and.
2-160 Catalyst 6500 Series Switch Command Refer e nce—Release 8.1 78-15474-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s copy Comma nd T ypes Swit ch co mman d.
2-161 Catalyst 6500 S eries Switch C o mmand Reference —Release 8.1 78-15474-01 Chapter 2 Catalyst 6500 Series Switch an d ROM Monitor Commands copy Exam ples Th is exampl e sh ows how to use t he copy command to upload t he switch c o nf iguration to a f ile named cat.
2-162 Catalyst 6500 Series Switch Command Refer e nce—Release 8.1 78-15474-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s copy Console> (enable) copy tftp config IP address or name of remote host? 172.20.22.7 Name of configuration file? cat.
2-163 Catalyst 6500 S eries Switch C o mmand Reference —Release 8.1 78-15474-01 Chapter 2 Catalyst 6500 Series Switch an d ROM Monitor Commands copy This example shows ho w to configure a Catal yst .
2-164 Catalyst 6500 Series Switch Command Refer e nce—Release 8.1 78-15474-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s copy Relat e d Commands clear ft p conf igure set.
2-165 Catalyst 6500 S eries Switch C o mmand Reference —Release 8.1 78-15474-01 Chapter 2 Catalyst 6500 Series Switch an d ROM Monitor Commands dele te delete T o delete a conf iguration f ile, use the del ete comm and. delete [[ m/ ] device : ] file n a me Syntax D escr i pti on Defaults Thi s command has no de fault setti ngs.
2-166 Catalyst 6500 Series Switch Command Refer e nce—Release 8.1 78-15474-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s dev dev T o list the de vice IDs av ailable on a switch, use the de v command. dev Syntax Descript ion This c omm and ha s no a rgume nts o r keywords.
2-167 Catalyst 6500 S eries Switch C o mmand Reference —Release 8.1 78-15474-01 Chapter 2 Catalyst 6500 Series Switch an d ROM Monitor Commands dir—ROM monit or dir—ROM monitor T o list the files of the name d device, use the dir comman d. dir de vice Syntax D escr i pti on Defaults Thi s command has no de fault setti ngs.
2-168 Catalyst 6500 Series Switch Command Refer e nce—Release 8.1 78-15474-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s dir—switch dir—switch T o display a list of f iles on a Flash memory dev ice, use the dir command.
2-169 Catalyst 6500 S eries Switch C o mmand Reference —Release 8.1 78-15474-01 Chapter 2 Catalyst 6500 Series Switch an d ROM Monitor Commands dir—swit c h Exam ples This example sho ws how to di.
2-170 Catalyst 6500 Series Switch Command Refer e nce—Release 8.1 78-15474-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s disa ble disable T o re turn t o n orma l mo de f rom p rivileged mo de , use the disable comman d. disable Syntax Descript ion This c omm and ha s no a rgume nts o r keywords.
Chapter 2 Ca talyst 6 500 Series Swi tch and ROM M onitor Comm ands discon nect 2-171 Catalyst 6500 Series Switch Command Refer e nce—Release 8.1 78-15474-01 22 disconn ect T o clos e an ac tive console p ort or T elnet s ession , use the disconnect command .
2-172 Catalyst 6500 Series Switch Command Refer e nce—Release 8.1 78-15474-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s download down load T o copy a software image from a specified host to the Flash me mory of a designate d module , use the download command.
2-173 Catalyst 6500 S eries Switch C o mmand Reference —Release 8.1 78-15474-01 Chapter 2 Catalyst 6500 Series Switch an d ROM Monitor Commands downlo ad The download seri al comm and uses Kermit through th e serial EI A/TIA -232 conso le port. The download serial co mman d is not allowed from a T elne t session.
2-174 Catalyst 6500 Series Switch Command Refer e nce—Release 8.1 78-15474-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s download This sam ple sessio n shows how to conne.
2-175 Catalyst 6500 S eries Switch C o mmand Reference —Release 8.1 78-15474-01 Chapter 2 Catalyst 6500 Series Switch an d ROM Monitor Commands downlo ad This example shows ho w to upgr ade the EPLD ima ge in force mod e on the modu le in slot 5: Console> (enable) download epld aq_cr128_art.
2-176 Catalyst 6500 Series Switch Command Refer e nce—Release 8.1 78-15474-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s enable enable T o ac t iv ate pr ivileged mo de, u se the enable co mma nd. I n p rivileged mo de , ad ditio na l c omm ands ar e av ailable, and cer tain comm ands disp lay additi onal infor mation.
Chapter 2 Ca talyst 6 500 Series Swi tch and ROM M onitor Comm ands format 2-177 Catalyst 6500 Series Switch Command Refer e nce—Release 8.1 78-15474-01 22 format T o fo rmat boo tflas h or a Fl ash PC ca rd (a Flash d evice must be fo rmat ted be fore it ca n be u sed), u se the fo r m a t command.
2-178 Catalyst 6500 Series Switch Command Refer e nce—Release 8.1 78-15474-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s for ma t Y ou can al so specify device1 : monlib-.
2-179 Catalyst 6500 S eries Switch C o mmand Reference —Release 8.1 78-15474-01 Chapter 2 Catalyst 6500 Series Switch an d ROM Monitor Commands frame frame T o displ ay an individual stac k fram e, use the fr ame command.
2-180 Catalyst 6500 Series Switch Command Refer e nce—Release 8.1 78-15474-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s fsc k fsck T o check a Fl ash fi le syste m for damage and to repair an y problems, us e the fsc k co mman d.
2-181 Catalyst 6500 S eries Switch C o mmand Reference —Release 8.1 78-15474-01 Chapter 2 Catalyst 6500 Series Switch an d ROM Monitor Commands fsck Ente r th e dir command ag ain to see that the co.
2-182 Catalyst 6500 Series Switch Command Refer e nce—Release 8.1 78-15474-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s history—RO M monitor history—ROM monitor T o displ ay the co mman d history (t he last 16 co mman ds executed in the ROM monitor e n vironment ), use the history co mmand.
2-183 Catalyst 6500 S eries Switch C o mmand Reference —Release 8.1 78-15474-01 Chapter 2 Catalyst 6500 Series Switch an d ROM Monitor Commands histor y—sw itc h history—switch T o s how th e co nt en ts of t he co mma nd h isto ry buffer , use th e history command.
2-184 Catalyst 6500 Series Switch Command Refer e nce—Release 8.1 78-15474-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s l2trace l2trace T o displa y the Layer 2 pa th taken b y the packet s that start at a specif ied source addr ess and en d at a specif ied destination address, use the l2trace comm and.
2-185 Catalyst 6500 S eries Switch C o mmand Reference —Release 8.1 78-15474-01 Chapter 2 Catalyst 6500 Series Switch an d ROM Monitor Commands l2tra ce The Lay er 2 trace feature is not supported when multiple de vices are atta ched to one port through hubs (for exa mple, multiple CDP neighbors detected on a port).
2-186 Catalyst 6500 Series Switch Command Refer e nce—Release 8.1 78-15474-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s l2trace This examp le shows how to display a su m.
2-187 Catalyst 6500 S eries Switch C o mmand Reference —Release 8.1 78-15474-01 Chapter 2 Catalyst 6500 Series Switch an d ROM Monitor Commands meminfo meminfo T o display informat io n about the main memory , p acket memory , and NVRAM, use the me min fo command.
2-188 Catalyst 6500 Series Switch Command Refer e nce—Release 8.1 78-15474-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s ping ping T o s end ICM P e ch o-r eque st pa c kets to an othe r nod e on t he n etwor k, use the ping command.
2-189 Catalyst 6500 S eries Switch C o mmand Reference —Release 8.1 78-15474-01 Chapter 2 Catalyst 6500 Series Switch an d ROM Monitor Commands ping The guide lines for th e ping -s command are as follows: • The maximum w aiting time befor e timing out is 2 seconds.
2-190 Catalyst 6500 Series Switch Command Refer e nce—Release 8.1 78-15474-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s ping 64 bytes from elvis: icmp_seq=4. time=11 ms 64 bytes from elvis: icmp_seq=5. time=7 ms 64 bytes from elvis: icmp_seq=6.
Chapter 2 Ca talyst 6 500 Series Swi tch and ROM M onitor Comm ands pwd 2-191 Catalyst 6500 Series Switch Command Refer e nce—Release 8.1 78-15474-01 22 pwd T o show the cu rrent set ting of the cd command , use the pwd comm and.
2-192 Catalyst 6500 Series Switch Command Refer e nce—Release 8.1 78-15474-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s quit quit T o exit a CLI session, use the quit comm and. quit Syntax Descript ion This c omm and ha s no a rgume nts o r keywords.
2-193 Catalyst 6500 S eries Switch C o mmand Reference —Release 8.1 78-15474-01 Chapter 2 Catalyst 6500 Series Switch an d ROM Monitor Commands reconfirm vmp s reconfirm vmps T o reconf irm the curr ent dynamic port VLA N membership assig nments with the VMPS serv er , use the reconf irm vmps comm and.
2-194 Catalyst 6500 Series Switch Command Refer e nce—Release 8.1 78-15474-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s reloa d reload T o for ce a modu le to acce pt a download throug h SCP , use the reload comman d.
2-195 Catalyst 6500 S eries Switch C o mmand Reference —Release 8.1 78-15474-01 Chapter 2 Catalyst 6500 Series Switch an d ROM Monitor Commands repeat repeat T o repeat a com mand, use the repe a t command . rep e a t [ num | string ] Syntax D escr i pti on Defaults If no argu ment is specifie d, the last command is repeated.
2-196 Catalyst 6500 Series Switch Command Refer e nce—Release 8.1 78-15474-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s repeat rommon 23 > repeat dir dir bootflash: F.
2-197 Catalyst 6500 S eries Switch C o mmand Reference —Release 8.1 78-15474-01 Chapter 2 Catalyst 6500 Series Switch an d ROM Monitor Commands reset— ROM moni tor reset—ROM monitor T o perf orm a soft re set of t he swi tch, use the re se t R OM m onit or c om mand.
2-198 Catalyst 6500 Series Switch Command Refer e nce—Release 8.1 78-15474-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s reset—switch reset—switch T o restart the system or an ind ividual module, schedule a system reset, or cancel a sche duled rese t, use the res et command.
2-199 Catalyst 6500 S eries Switch C o mmand Reference —Release 8.1 78-15474-01 Chapter 2 Catalyst 6500 Series Switch an d ROM Monitor Commands reset—s witch Y ou can use the rese t min down command to rese t the switch as p art of a mi nimal d ow ntime soft ware upgrade in a system with a redundant supervi sor engine .
2-200 Catalyst 6500 Series Switch Command Refer e nce—Release 8.1 78-15474-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s reset—switch This e xample sho ws how to schedu.
2-201 Catalyst 6500 S eries Switch C o mmand Reference —Release 8.1 78-15474-01 Chapter 2 Catalyst 6500 Series Switch an d ROM Monitor Commands reset—s witch.
Chapter 2 Ca talyst 6 500 Series Swi tch and ROM M onitor Comm ands rest or e coun t ers 2-202 Catalyst 6500 Series Switch Command Refer e nce—Release 8.1 78-15474-01 2F2 restore counters T o rest ore MA C and port co unters, use the re stor e counters command.
2-203 Catalyst 6500 S eries Switch C o mmand Reference —Release 8.1 78-15474-01 Chapter 2 Catalyst 6500 Series Switch an d ROM Monitor Commands rollbac k rollback T o clear chan ges made to the A CL edit b u ffe r since its last sa ve, use th e rollback co mmand.
2-204 Catalyst 6500 Series Switch Command Refer e nce—Release 8.1 78-15474-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s session session T o open a se ssion with a modu le (for exam ple, the MSM, N AM, or A TM), use the session comm and.
2-205 Catalyst 6500 S eries Switch C o mmand Reference —Release 8.1 78-15474-01 Chapter 2 Catalyst 6500 Series Switch an d ROM Monitor Commands set set T o display all of the R OM monitor va r iable names with their value s, use the set comm and. set Syntax D escr i pti on This comm a nd ha s n o argume nts or keyword s.
2-206 Catalyst 6500 Series Switch Command Refer e nce—Release 8.1 78-15474-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s set accou nti ng co mm an d s set accountin g commands T o en able comm and ev ent acco unting on t he switch, use the set acc ounting commands command.
2-207 Catalyst 6500 S eries Switch C o mmand Reference —Release 8.1 78-15474-01 Chapter 2 Catalyst 6500 Series Switch an d ROM Monitor Commands set acco unt ing con nec t set accountin g connect T o ena ble a cco unti ng of o ut bound co nne ctio n events on th e switc h, use the set accounting co nnect comm and.
2-208 Catalyst 6500 Series Switch Command Refer e nce—Release 8.1 78-15474-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s set accou nting ex ec set accountin g exec T o enabl e account ing of norm al logi n sessions on th e switch, use the se t acco untin g exec comman d.
2-209 Catalyst 6500 S eries Switch C o mmand Reference —Release 8.1 78-15474-01 Chapter 2 Catalyst 6500 Series Switch an d ROM Monitor Commands set acco unt ing exe c Relat e d Commands set accounti.
2-210 Catalyst 6500 Series Switch Command Refer e nce—Release 8.1 78-15474-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s set account ing suppress set accountin g suppress.
2-211 Catalyst 6500 S eries Switch C o mmand Reference —Release 8.1 78-15474-01 Chapter 2 Catalyst 6500 Series Switch an d ROM Monitor Commands set acco untin g sy stem set accountin g system T o enable acc ounting of system e ve n ts on the switch, use th e set acco unti ng syst em command.
2-212 Catalyst 6500 Series Switch Command Refer e nce—Release 8.1 78-15474-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s set accounti ng system Relat e d Commands set acc.
2-213 Catalyst 6500 S eries Switch C o mmand Reference —Release 8.1 78-15474-01 Chapter 2 Catalyst 6500 Series Switch an d ROM Monitor Commands set acco unt ing upd ate set accountin g update T o con figure the fr equen cy of account ing updat es, use the set accounting updat e command.
2-214 Catalyst 6500 Series Switch Command Refer e nce—Release 8.1 78-15474-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s set acllog ratelimit set acllog ratelimit T o lim it the nu mbe r of pa ckets se nt to the r oute p roc essor CPU for bri dged ACEs, use the set ac llog rate limit command .
2-215 Catalyst 6500 S eries Switch C o mmand Reference —Release 8.1 78-15474-01 Chapter 2 Catalyst 6500 Series Switch an d ROM Monitor Commands set al ias set alias T o d efine ali ases (sho rtha nd version s) of co mm an ds, use the se t al ias command.
2-216 Catalyst 6500 Series Switch Command Refer e nce—Release 8.1 78-15474-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s set ar p set arp T o add IP ad dress- to-MA C address mapping entries to the ARP tabl e and to set the ARP agin g time for the table , use the set arp command .
2-217 Catalyst 6500 S eries Switch C o mmand Reference —Release 8.1 78-15474-01 Chapter 2 Catalyst 6500 Series Switch an d ROM Monitor Commands set ar p This e xample sho ws how to conf igure a permanent ARP entr y , which will remain in the ARP cache after a system reset: Console> (enable) set arp permanent 198.
2-218 Catalyst 6500 Series Switch Command Refer e nce—Release 8.1 78-15474-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s set authentication enable set authentica tion ena.
2-219 Catalyst 6500 S eries Switch C o mmand Reference —Release 8.1 78-15474-01 Chapter 2 Catalyst 6500 Series Switch an d ROM Monitor Commands set authent ication enable Usage Guid el i nes Use aut.
2-220 Catalyst 6500 Series Switch Command Refer e nce—Release 8.1 78-15474-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s set auth entication lo gin set authentica tion login T o enable T A CA C S+, RADIUS, or K erberos as the authenti cation met hod for login , use the set authen tic atio n l og in command.
2-221 Catalyst 6500 S eries Switch C o mmand Reference —Release 8.1 78-15474-01 Chapter 2 Catalyst 6500 Series Switch an d ROM Monitor Commands set a uth e n t ic a t ion lo g in Usage Guid el i nes This comm and all ows you to choose th e authen tica tion meth od for the we b interfac e.
2-222 Catalyst 6500 Series Switch Command Refer e nce—Release 8.1 78-15474-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s set au tho riz at io n comm an d s set authorizatio n commands T o enable auth orization of comman d e vents on the switc h, use the set author ization comm ands comm and.
2-223 Catalyst 6500 S eries Switch C o mmand Reference —Release 8.1 78-15474-01 Chapter 2 Catalyst 6500 Series Switch an d ROM Monitor Commands set authori zation com m a nds Exam ples This exampl e.
2-224 Catalyst 6500 Series Switch Command Refer e nce—Release 8.1 78-15474-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s set authori zation ena ble set authorizatio n enable T o enable auth orization of pri vileged mode sessions on the switch, use the set authori zation en able comm and.
2-225 Catalyst 6500 S eries Switch C o mmand Reference —Release 8.1 78-15474-01 Chapter 2 Catalyst 6500 Series Switch an d ROM Monitor Commands set a uth o r i zat ion e n a b le Exam ples Th is exa.
2-226 Catalyst 6500 Series Switch Command Refer e nce—Release 8.1 78-15474-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s set authorization exec set authorizatio n exec T o enable auth orization of ex ec, normal login mode, sessio n ev ents on the switch, use the set authorization e xec command.
2-227 Catalyst 6500 S eries Switch C o mmand Reference —Release 8.1 78-15474-01 Chapter 2 Catalyst 6500 Series Switch an d ROM Monitor Commands set authori zation exec Exam ples This example sho ws .
2-228 Catalyst 6500 Series Switch Command Refer e nce—Release 8.1 78-15474-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s set ba nne r lc d set banner lc d T o con figure t he Ca talyst 650 0 se rie s Swi tc h Fabric Mod ul e L CD use r bann er, use the set banner lcd comm and.
2-229 Catalyst 6500 S eries Switch C o mmand Reference —Release 8.1 78-15474-01 Chapter 2 Catalyst 6500 Series Switch an d ROM Monitor Commands set bann er m ot d set banner motd T o prog ram a n MO TD banner to appear before se ssion l ogin, u se the set banner motd comman d.
2-230 Catalyst 6500 Series Switch Command Refer e nce—Release 8.1 78-15474-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s set ba nner tel net set banner te lnet T o di splay or s uppr ess t he “ Cisc o System s C onsole” T elnet ba nner me ssage , use the s et banner telnet comm and.
2-231 Catalyst 6500 S eries Switch C o mmand Reference —Release 8.1 78-15474-01 Chapter 2 Catalyst 6500 Series Switch an d ROM Monitor Commands set boot aut o-conf ig set boot auto-con fig T o specif y one or mor e configur ation files t o use to config ure the switch at boo tup, use the set boot auto-c onfig comm and.
2-232 Catalyst 6500 Series Switch Command Refer e nce—Release 8.1 78-15474-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s set boo t config -regist er set boot config -register T o con fi gu re t he b oot co nfi gu rat ion regi ster va lue , use th e s et bo ot co n fig-regis te r co mman d.
2-233 Catalyst 6500 S eries Switch C o mmand Reference —Release 8.1 78-15474-01 Chapter 2 Catalyst 6500 Series Switch an d ROM Monitor Commands set boot conf ig-regis t er The baud rate speci fied in the conf iguration re gister is use d by the R OM monitor o nly and is dif ferent from the baud rate spe cif ied by the set system baud command.
2-234 Catalyst 6500 Series Switch Command Refer e nce—Release 8.1 78-15474-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s set boo t config -regist er Relat e d Commands co.
2-235 Catalyst 6500 S eries Switch C o mmand Reference —Release 8.1 78-15474-01 Chapter 2 Catalyst 6500 Series Switch an d ROM Monitor Commands set boot conf ig-regis t er auto-c onf ig set boot config -register au to-config T o configure auto -config file dispensa tion, use the set boot conf ig-reg ister auto -confi g comm and .
2-236 Catalyst 6500 Series Switch Command Refer e nce—Release 8.1 78-15474-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s set boot config-register auto-config If you use the set boot auto-con f ig bootflash: switch.cf g with the overwri te option, you m ust use th e copy conf ig bootflash:switch.
2-237 Catalyst 6500 S eries Switch C o mmand Reference —Release 8.1 78-15474-01 Chapter 2 Catalyst 6500 Series Switch an d ROM Monitor Commands set boot conf ig-regis t er auto-c onf ig This e xampl.
2-238 Catalyst 6500 Series Switch Command Refer e nce—Release 8.1 78-15474-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s set boot device set boot device T o set the Network Analysis Module (NAM) or Int rusion Detection System (I DS) boot environment, use the set boot device command .
2-239 Catalyst 6500 S eries Switch C o mmand Reference —Release 8.1 78-15474-01 Chapter 2 Catalyst 6500 Series Switch an d ROM Monitor Commands set boot dev ice This example shows ho w to spe cify m.
2-240 Catalyst 6500 Series Switch Command Refer e nce—Release 8.1 78-15474-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s set boot sync no w set boot sync now T o immed iately initiate synchroni zation of the system image be tween the ac ti ve and red undant supervi sor engine, use the set bo ot sync now command.
2-241 Catalyst 6500 S eries Switch C o mmand Reference —Release 8.1 78-15474-01 Chapter 2 Catalyst 6500 Series Switch an d ROM Monitor Commands set boot system f lash set boot system fla sh T o set the BOOT envi ronment v ariab le tha t specif ies a li st of ima ges th e switc h load s at sta rtup, u se th e set boot system flas h com mand.
2-242 Catalyst 6500 Series Switch Command Refer e nce—Release 8.1 78-15474-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s set bo ot system flash Relat e d Commands clear b.
2-243 Catalyst 6500 S eries Switch C o mmand Reference —Release 8.1 78-15474-01 Chapter 2 Catalyst 6500 Series Switch an d ROM Monitor Commands set ca m set cam T o add entries int o the CAM table, set the agin g time for the CAM table, and c on fi gu re tr af f ic f ilt er in g from and to a specifi c host, us e t he set cam co mmand .
2-244 Catalyst 6500 Series Switch Command Refer e nce—Release 8.1 78-15474-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s set ca m Usage Guid el i nes If the gi ven MA C a.
2-245 Catalyst 6500 S eries Switch C o mmand Reference —Release 8.1 78-15474-01 Chapter 2 Catalyst 6500 Series Switch an d ROM Monitor Commands set cam not if i cation set cam notification T o enabl.
2-246 Catalyst 6500 Series Switch Command Refer e nce—Release 8.1 78-15474-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s set cam notification Command Mode s Pri vile ged.
2-247 Catalyst 6500 S eries Switch C o mmand Reference —Release 8.1 78-15474-01 Chapter 2 Catalyst 6500 Series Switch an d ROM Monitor Commands set cam not if i cation Relat e d Commands clear ca m .
2-248 Catalyst 6500 Series Switch Command Refer e nce—Release 8.1 78-15474-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s set cd p set cdp T o ena ble , disa ble, o r co nfigure Ci sco D isc overy Protoc ol (CD P) fea ture s g lob ally on al l po rts o r on specif ied p orts, use the set cdp co mman d.
2-249 Catalyst 6500 S eries Switch C o mmand Reference —Release 8.1 78-15474-01 Chapter 2 Catalyst 6500 Series Switch an d ROM Monitor Commands set cd p Usage Guid el i nes The set cdp v ersion command allo ws you to global ly set the hi ghes t version n umber of CDP p ackets t o send.
2-250 Catalyst 6500 Series Switch Command Refer e nce—Release 8.1 78-15474-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s set channelprotocol set channelp rotocol T o set th e protoc ol that man ages chan nelin g on a module , use the se t channe lprotocol comman d.
2-251 Catalyst 6500 S eries Switch C o mmand Reference —Release 8.1 78-15474-01 Chapter 2 Catalyst 6500 Series Switch an d ROM Monitor Commands set chan nel protoc ol Relat e d Commands clear la cp-.
2-252 Catalyst 6500 Series Switch Command Refer e nce—Release 8.1 78-15474-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s set c hannel vlancost set channel vla ncost T o s et th e chan nel V LAN co st, use th e set channel vlancost comm and.
2-253 Catalyst 6500 S eries Switch C o mmand Reference —Release 8.1 78-15474-01 Chapter 2 Catalyst 6500 Series Switch an d ROM Monitor Commands set chan nel vlanc ost After you enter this comm and, you must reenter the set s pantr ee portvlan cost comman d so th at the desired VLAN or VL ANs are associated with all the cha nnel ports.
2-254 Catalyst 6500 Series Switch Command Refer e nce—Release 8.1 78-15474-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s set config acl nvram set config acl n vram T o copy the curren t commi tted A CL co nfiguration fr om DRA M back int o NVRA M, us e the set config acl n vram com ma nd .
2-255 Catalyst 6500 S eries Switch C o mmand Reference —Release 8.1 78-15474-01 Chapter 2 Catalyst 6500 Series Switch an d ROM Monitor Commands set config mode set config mod e T o chang e the confi.
2-256 Catalyst 6500 Series Switch Command Refer e nce—Release 8.1 78-15474-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s set confi g m ode Exam ples Th is exampl e sh ows how to set the co nfigurati on mode to bi nary : Console> (enable) set config mode binary System configuration copied to NVRAM.
2-257 Catalyst 6500 S eries Switch C o mmand Reference —Release 8.1 78-15474-01 Chapter 2 Catalyst 6500 Series Switch an d ROM Monitor Commands set cops set cops T o conf igure COPS funct ionality , use the set cops comm and.
2-258 Catalyst 6500 Series Switch Command Refer e nce—Release 8.1 78-15474-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s set cops When s pecify ing the retry- inte rval ,.
2-259 Catalyst 6500 S eries Switch C o mmand Reference —Release 8.1 78-15474-01 Chapter 2 Catalyst 6500 Series Switch an d ROM Monitor Commands set cryp to ke y r sa set crypto key rsa T o gen erate a nd c onfigure an RSA key pa ir, use the set c rypto key rsa command.
Chapter 2 Ca talyst 6 500 Series Swi tch and ROM M onitor Comm ands set def ault portstatu s 2-260 Catalyst 6500 Series Switch Command Refer e nce—Release 8.1 78-15474-01 222 set default portstatus T o set t he def ault port sta tus, use the set default portstatus com m and.
2-261 Catalyst 6500 S eries Switch C o mmand Reference —Release 8.1 78-15474-01 Chapter 2 Catalyst 6500 Series Switch an d ROM Monitor Commands set dot1q- all-tagg ed set dot1q-all-tagged T o chang e all existing and new dot1q trunk s to the dot1q- only mode , use the set dot1q-all-tagged comm and.
2-262 Catalyst 6500 Series Switch Command Refer e nce—Release 8.1 78-15474-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s set dot1x set dot1x T o conf igure dot1 x on a syste m, use the set do t1x comman d.
2-263 Catalyst 6500 S eries Switch C o mmand Reference —Release 8.1 78-15474-01 Chapter 2 Catalyst 6500 Series Switch an d ROM Monitor Commands set d ot1x • max-req count is 2 • shutdown-timeout is 300 seconds Comma nd T ypes Swit ch co mman d. Command Mode s Pri vile ged.
2-264 Catalyst 6500 Series Switch Command Refer e nce—Release 8.1 78-15474-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s set dot1x This e xample sho ws you h o w to sp ec.
2-265 Catalyst 6500 S eries Switch C o mmand Reference —Release 8.1 78-15474-01 Chapter 2 Catalyst 6500 Series Switch an d ROM Monitor Commands set e nab lep a s s set enablepa ss T o change the passw ord for the pri vileged le vel of the CLI, use the set enablepass comm and.
2-266 Catalyst 6500 Series Switch Command Refer e nce—Release 8.1 78-15474-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s set er rdisabl e-time out set errdisable-timeout T o conf igure a ti meout to au tomatically reenable p orts that are in the er rdisable state, u se the set errdisable -timeout comm and.
2-267 Catalyst 6500 S eries Switch C o mmand Reference —Release 8.1 78-15474-01 Chapter 2 Catalyst 6500 Series Switch an d ROM Monitor Commands set errdisa ble-time out Y o u can enable or disable e rrdisable t imeout fo r each of the reason s that are lis ted.
2-268 Catalyst 6500 Series Switch Command Refer e nce—Release 8.1 78-15474-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s set er rordetect ion set errordetection T o enabl e or disab le various erro r detect ions, use the set err ordetection co mmand.
2-269 Catalyst 6500 S eries Switch C o mmand Reference —Release 8.1 78-15474-01 Chapter 2 Catalyst 6500 Series Switch an d ROM Monitor Commands set errord et ection Relat e d Commands sho w err orde.
2-270 Catalyst 6500 Series Switch Command Refer e nce—Release 8.1 78-15474-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s set fan-tray-version set fan-tray-version T o set t he ve rsion for the fan tr ay in th e chassis, u se the set fan-tray-versi on command.
2-271 Catalyst 6500 S eries Switch C o mmand Reference —Release 8.1 78-15474-01 Chapter 2 Catalyst 6500 Series Switch an d ROM Monitor Commands set feature agg-link- partne r set feature ag g-link-partner T o enable or dis able the aggress iv e lin k partn er featu re, use the set fe ature agg-link-partner command.
2-272 Catalyst 6500 Series Switch Command Refer e nce—Release 8.1 78-15474-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s set fea ture dot1x- radius-ke epalive set feature do t1x-radius-keep alive T o ena ble o r disab le th e 802.
2-273 Catalyst 6500 S eries Switch C o mmand Reference —Release 8.1 78-15474-01 Chapter 2 Catalyst 6500 Series Switch an d ROM Monitor Commands set feature mdg set feature mdg T o enable or disable the multiple defau lt gate way feature, use the set feature mdg command.
2-274 Catalyst 6500 Series Switch Command Refer e nce—Release 8.1 78-15474-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s set firewall set firewall T o conf ig ure the parameters for a Firewa ll Services Module (FWSM), use the set firewall command.
2-275 Catalyst 6500 S eries Switch C o mmand Reference —Release 8.1 78-15474-01 Chapter 2 Catalyst 6500 Series Switch an d ROM Monitor Commands set ft p set ftp T o con figure Fi le Transfer Pr otoc ol ( FTP) para m eters, us e the set ftp comm and.
2-276 Catalyst 6500 Series Switch Command Refer e nce—Release 8.1 78-15474-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s set ftp Relat e d Commands clear ft p show ftp.
2-277 Catalyst 6500 S eries Switch C o mmand Reference —Release 8.1 78-15474-01 Chapter 2 Catalyst 6500 Series Switch an d ROM Monitor Commands set garp timer set garp timer T o adjust the v alues of the join, leav e, and leav eall timers, u se the set garp timer com mand .
2-278 Catalyst 6500 Series Switch Command Refer e nce—Release 8.1 78-15474-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s set gmrp set gmrp T o enable or d isable GARP Multica s t Reg istration Protoco l (GMRP) on the swit ch in all VLANs on all ports, use the set gm rp comman d.
2-279 Catalyst 6500 S eries Switch C o mmand Reference —Release 8.1 78-15474-01 Chapter 2 Catalyst 6500 Series Switch an d ROM Monitor Commands set gmrp f wdall set gmrp fwdall T o enab le or di sable the Forward All feature on a speci fied port or mo dule an d port lis t, use t he set gmrp fwdall comman d.
2-280 Catalyst 6500 Series Switch Command Refer e nce—Release 8.1 78-15474-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s set g mrp regi strat ion set gmrp registration T o spec ify the GMRP regi strat ion type, use the set gmrp registra tion co mmand.
2-281 Catalyst 6500 S eries Switch C o mmand Reference —Release 8.1 78-15474-01 Chapter 2 Catalyst 6500 Series Switch an d ROM Monitor Commands set gmrp timer set gmrp timer T o adjust the v alues of the join, leav e, and leav eall timers, u se the set gmrp timer comman d.
2-282 Catalyst 6500 Series Switch Command Refer e nce—Release 8.1 78-15474-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s set gmrp timer This e xam pl e sho ws how to set .
2-283 Catalyst 6500 S eries Switch C o mmand Reference —Release 8.1 78-15474-01 Chapter 2 Catalyst 6500 Series Switch an d ROM Monitor Commands set gv rp set gvrp T o enab le or disa ble GARP V LAN Registrati on Protocol (GVRP) globally in the switch or on a pe r-port basis, use the set g vrp command.
2-284 Catalyst 6500 Series Switch Command Refer e nce—Release 8.1 78-15474-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s set gvrp ap plicant set gvrp appli cant T o s pecify whether or not a VLAN is de clared out of blocking ports, use the set gv rp appl icant comm and.
2-285 Catalyst 6500 S eries Switch C o mmand Reference —Release 8.1 78-15474-01 Chapter 2 Catalyst 6500 Series Switch an d ROM Monitor Commands set gvrp dynamic- vlan-c reati on set gvrp dynamic-vlan-creatio n T o enab le or disable dynamic VLAN creation, u se the set gvrp dynamic-vl an-creation command.
2-286 Catalyst 6500 Series Switch Command Refer e nce—Release 8.1 78-15474-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s set gvr p regist ration set gvrp reg istra tion T o s et the ad mini stra tive contro l of a n outbo und po rt a nd appl y t o all VL ANs on the tr unk , use t he set gvr p re gistra tion command.
2-287 Catalyst 6500 S eries Switch C o mmand Reference —Release 8.1 78-15474-01 Chapter 2 Catalyst 6500 Series Switch an d ROM Monitor Commands set gvrp r egi stratio n This e xample shows ho w to s.
2-288 Catalyst 6500 Series Switch Command Refer e nce—Release 8.1 78-15474-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s set gvrp timer set gvrp timer To adju st the v alues of th e join, le av e, and lea veall t imers, use the set gvrp time r command.
2-289 Catalyst 6500 S eries Switch C o mmand Reference —Release 8.1 78-15474-01 Chapter 2 Catalyst 6500 Series Switch an d ROM Monitor Commands set gvr p timer This e xam pl e sho ws how to set t he.
2-290 Catalyst 6500 Series Switch Command Refer e nce—Release 8.1 78-15474-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s set igmp set igmp T o ena ble o r di sab le Inte rn et Group M anag eme nt Pr otoc ol ( IG MP) s noop ing on the swi tch , use the set ig mp command.
2-291 Catalyst 6500 S eries Switch C o mmand Reference —Release 8.1 78-15474-01 Chapter 2 Catalyst 6500 Series Switch an d ROM Monitor Commands set ig mp fastbl ock set igmp fastblock T o enable or d isable the IGMP v ersion 3 fast-bloc k mechanism on the switch, use th e set i gmp fastb lock comm and.
2-292 Catalyst 6500 Series Switch Command Refer e nce—Release 8.1 78-15474-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s set igmp fastleave set igmp fastleave T o ena ble o r di sab le Inte rn et Group M anag em ent Prot ocol (IG MP) fa stle ave processin g, use the set i gmp fa stleave comman d.
2-293 Catalyst 6500 S eries Switch C o mmand Reference —Release 8.1 78-15474-01 Chapter 2 Catalyst 6500 Series Switch an d ROM Monitor Commands set igmp flo odi ng set igmp flooding T o acti vate o r to p r e vent flooding of mul ticast traf fic after th e last host leave s a mult icast grou p, enter the set igmp f loodin g co mman d.
2-294 Catalyst 6500 Series Switch Command Refer e nce—Release 8.1 78-15474-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s set igmp leav e-query-type set igmp leave-que ry-type T o s et the t ype o f que ry to be se nt wh en a po rt r ece ives a leave messag e, u se the se t igmp lea ve-query-type comman d.
2-295 Catalyst 6500 S eries Switch C o mmand Reference —Release 8.1 78-15474-01 Chapter 2 Catalyst 6500 Series Switch an d ROM Monitor Commands set igmp mode set igmp mode T o s et the IG MP snoopi n g m ode, use th e set igmp mode co mmand .
2-296 Catalyst 6500 Series Switch Command Refer e nce—Release 8.1 78-15474-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s set igmp querier set igmp querier T o conf igure the IGMP q uerier fo r a specif ic VLAN, use the set igmp querier command .
2-297 Catalyst 6500 S eries Switch C o mmand Reference —Release 8.1 78-15474-01 Chapter 2 Catalyst 6500 Series Switch an d ROM Monitor Commands set ig mp querier This exampl e shows ho w t o set the.
2-298 Catalyst 6500 Series Switch Command Refer e nce—Release 8.1 78-15474-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s set igmp ratelimit set igmp ratelimit T o enable o r disable IGMP rate limiting or to se t the rate limit for I GMP snooping pack ets, use the set igmp ratelimit comman d.
2-299 Catalyst 6500 S eries Switch C o mmand Reference —Release 8.1 78-15474-01 Chapter 2 Catalyst 6500 Series Switch an d ROM Monitor Commands set i gmp rate lim it is 100. W e recomme nd that yo u increase the PIMv 2 hello r atelimit to 3000 b y entering se t igmp ratelimit pimv2 3000 .
2-300 Catalyst 6500 Series Switch Command Refer e nce—Release 8.1 78-15474-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s set igmp v3- processing set igmp v3-processing T o exp licitly e nabl e or disa ble I GMP version 3 snoo ping, u se the set igmp v3-processing comm and.
2-301 Catalyst 6500 S eries Switch C o mmand Reference —Release 8.1 78-15474-01 Chapter 2 Catalyst 6500 Series Switch an d ROM Monitor Commands set igmp v3-pro ces sing Relat e d Commands set ig mp .
2-302 Catalyst 6500 Series Switch Command Refer e nce—Release 8.1 78-15474-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s set inlinepower defaultallocation set inlinepower defaultallocation T o set t he def ault po wer allocation for a po rt, use th e set inl inepower defaultall ocation comm and.
2-303 Catalyst 6500 S eries Switch C o mmand Reference —Release 8.1 78-15474-01 Chapter 2 Catalyst 6500 Series Switch an d ROM Monitor Commands set in terfac e set interface T o conf igure the in- b and an d Serial L in e In ternet Prot ocol (SLI P) interf aces on the switc h , use the set interface command.
2-304 Catalyst 6500 Series Switch Command Refer e nce—Release 8.1 78-15474-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s set interface Usage Guid el i nes The set interfac e sc0 dchp command is valid on ly when the addr ess is learne d from the DHCP server and available in privile ged mode only.
2-305 Catalyst 6500 S eries Switch C o mmand Reference —Release 8.1 78-15474-01 Chapter 2 Catalyst 6500 Series Switch an d ROM Monitor Commands set in terfac e This exa mple sho ws ho w to releas e a DHC P-learned IP address back to the D HCP IP addr ess pool : Console> (enable) set interface sc0 dhcp release Releasing IP address.
2-306 Catalyst 6500 Series Switch Command Refer e nce—Release 8.1 78-15474-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s set ip alias set ip alias T o add aliases o f IP addresses, use the s et ip alias comman d. set ip alias name i p_addr Syntax Descript ion Defaults The de fault configurat ion is one IP al ias (0.
2-307 Catalyst 6500 S eries Switch C o mmand Reference —Release 8.1 78-15474-01 Chapter 2 Catalyst 6500 Series Switch an d ROM Monitor Commands set ip dns set ip dns T o enab le or dis able DNS, use the set ip dns comman d. set ip dns { ena bl e | di sa ble } Syntax D escr i pti on Defaults The def ault is DNS is d isabled .
2-308 Catalyst 6500 Series Switch Command Refer e nce—Release 8.1 78-15474-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s set ip dns domain set ip dns domain T o set t he defau lt DNS doma in name, us e the set ip dns domain comman d.
2-309 Catalyst 6500 S eries Switch C o mmand Reference —Release 8.1 78-15474-01 Chapter 2 Catalyst 6500 Series Switch an d ROM Monitor Commands set ip dns ser ver set ip dns server T o set the IP addres s of a Doma in N ame Sys tem (D NS) s erver , use t he set i p dns server comman d.
2-310 Catalyst 6500 Series Switch Command Refer e nce—Release 8.1 78-15474-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s set ip fragmentation set ip fragmentation T o ena ble or d isable t he frag menta tion of IP packet s bridge d betwee n FDDI and Eth ernet networks, use the set ip fragment ation command.
2-311 Catalyst 6500 S eries Switch C o mmand Reference —Release 8.1 78-15474-01 Chapter 2 Catalyst 6500 Series Switch an d ROM Monitor Commands set i p ht tp por t set ip http port T o conf igure the TCP port numbe r for the Hype rT ext T ransfe r Protoco l (HTTP) se rve r , use the set ip http port comma nd.
2-312 Catalyst 6500 Series Switch Command Refer e nce—Release 8.1 78-15474-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s set ip http server set ip http server T o e na bl e o r di sab l e th e HTT P se rver, use the se t ip http server comma nd.
2-313 Catalyst 6500 S eries Switch C o mmand Reference —Release 8.1 78-15474-01 Chapter 2 Catalyst 6500 Series Switch an d ROM Monitor Commands set i p p e rm it set ip permit T o enable o r disa ble the IP permit li st and to specify IP a d dresses to be added to the I P permit list , use the set ip permit com mand.
2-314 Catalyst 6500 Series Switch Command Refer e nce—Release 8.1 78-15474-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s set ip permit Exam ples This example sho ws how to add an IP address to the IP permit list: Console> (enable) set ip permit 192.
2-315 Catalyst 6500 S eries Switch C o mmand Reference —Release 8.1 78-15474-01 Chapter 2 Catalyst 6500 Series Switch an d ROM Monitor Commands set ip redire ct set ip redirect T o enable o r disab le ICM P re direct me ssage s on the Catalyst 6500 se ries switches, u se the set ip redirect co mman d.
2-316 Catalyst 6500 Series Switch Command Refer e nce—Release 8.1 78-15474-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s set ip route set ip route T o add IP addr esses or a liases to the IP rout ing table, use the set ip route comma nd.
2-317 Catalyst 6500 S eries Switch C o mmand Reference —Release 8.1 78-15474-01 Chapter 2 Catalyst 6500 Series Switch an d ROM Monitor Commands set ip route Exam ples Th ese examples show ho w to ad.
2-318 Catalyst 6500 Series Switch Command Refer e nce—Release 8.1 78-15474-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s set ip unr eachabl e set ip unreachabl e T o enable or disable ICMP unreac hable messages on the Catalys t 6500 series switc h, use the set ip unrea chable command.
2-319 Catalyst 6500 S eries Switch C o mmand Reference —Release 8.1 78-15474-01 Chapter 2 Catalyst 6500 Series Switch an d ROM Monitor Commands set kerbe ros clients m and atory set kerberos clients.
2-320 Catalyst 6500 Series Switch Command Refer e nce—Release 8.1 78-15474-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s set kerbero s credentials f orward set kerberos c.
2-321 Catalyst 6500 S eries Switch C o mmand Reference —Release 8.1 78-15474-01 Chapter 2 Catalyst 6500 Series Switch an d ROM Monitor Commands set kerb eros loca l-real m set kerberos local-realm T o conf ig ure a switch to authentica te us ers defin ed in the Ker beros database, use the set kerberos local-r ealm co mmand .
2-322 Catalyst 6500 Series Switch Command Refer e nce—Release 8.1 78-15474-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s set k erb eros r eal m set kerberos realm T o map th e name of a Kerbe ros realm to a DNS domai n name or a host name, use the set ke rberos realm comm and.
2-323 Catalyst 6500 S eries Switch C o mmand Reference —Release 8.1 78-15474-01 Chapter 2 Catalyst 6500 Series Switch an d ROM Monitor Commands set kerb eros s erver set kerberos server T o s pecify whi ch Key Distribution Ce nte r (K DC) to us e on t he sw itch , use the se t kerberos serv er comm and.
2-324 Catalyst 6500 Series Switch Command Refer e nce—Release 8.1 78-15474-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s set kerbero s srvtab entry set kerberos srvtab ent ry T o enter the SR VT AB f ile directly into the switch fr o m the command li ne, use the set kerberos srvtab entry command.
2-325 Catalyst 6500 S eries Switch C o mmand Reference —Release 8.1 78-15474-01 Chapter 2 Catalyst 6500 Series Switch an d ROM Monitor Commands set kerbe ros srvt ab entry Exam ples This example sho ws how to enter a SR VT AB file di rectly into the switch: Console> (enable) set kerberos srvtab entry host/niners.
2-326 Catalyst 6500 Series Switch Command Refer e nce—Release 8.1 78-15474-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s set kerber os srvtab rem ote set kerberos srvtab .
2-327 Catalyst 6500 S eries Switch C o mmand Reference —Release 8.1 78-15474-01 Chapter 2 Catalyst 6500 Series Switch an d ROM Monitor Commands set key conf ig-key set key config-key T o d efine a private 3DES key , use the set key conf ig-ke y command .
2-328 Catalyst 6500 Series Switch Command Refer e nce—Release 8.1 78-15474-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s set l2pr otocol-tunne l cos set l2protoco l-tunnel c os T o apply a CoS va lue to all ingress tunneling ports, use the set l2protocol-tunnel cos comm and.
2-329 Catalyst 6500 S eries Switch C o mmand Reference —Release 8.1 78-15474-01 Chapter 2 Catalyst 6500 Series Switch an d ROM Monitor Commands set l2prot oco l-tun nel trunk set l2protoco l-tunnel trun k T o set La yer 2 proto col tunnel ing on tru nks, use the set l2pr ot ocol-tunnel trunk command.
2-330 Catalyst 6500 Series Switch Command Refer e nce—Release 8.1 78-15474-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s set lac p-channel system-p riority set lacp-channe l system-priority T o set t he priority o f the sy stem, use th e set lacp-channel system-priority command.
2-331 Catalyst 6500 S eries Switch C o mmand Reference —Release 8.1 78-15474-01 Chapter 2 Catalyst 6500 Series Switch an d ROM Monitor Commands set lcperror actio n set lcperrorac tion T o con figur.
2-332 Catalyst 6500 Series Switch Command Refer e nce—Release 8.1 78-15474-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s set lda set lda T o conf ig ure the ASLB information on the Catal y st 6500 series switch, use the set lda comm and.
2-333 Catalyst 6500 S eries Switch C o mmand Reference —Release 8.1 78-15474-01 Chapter 2 Catalyst 6500 Series Switch an d ROM Monitor Commands set ld a Usage Guid el i nes This c omm and is suppor ted on ly o n sw itc he s configu red w ith th e Supe r visor En gine 1 wi th L aye r 3 Switching Engine WS-F6K-PFC (Pol icy Feature Card) .
2-334 Catalyst 6500 Series Switch Command Refer e nce—Release 8.1 78-15474-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s set lda This e xample sho ws ho w to specify th e router VLAN: Console> (enable) set lda router 110 4/26 Successfully set router vlan and ld port.
2-335 Catalyst 6500 S eries Switch C o mmand Reference —Release 8.1 78-15474-01 Chapter 2 Catalyst 6500 Series Switch an d ROM Monitor Commands set l e n g th set length T o conf igure the nu mber of lin es in t he terminal d isplay screen, u se the se t length co mman d.
2-336 Catalyst 6500 Series Switch Command Refer e nce—Release 8.1 78-15474-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s set localuser set localuser T o conf igure the switch to u se loc al user authenticatio n to auth en tic ate ac ces s o n the s witch, use the set localuser command.
2-337 Catalyst 6500 S eries Switch C o mmand Reference —Release 8.1 78-15474-01 Chapter 2 Catalyst 6500 Series Switch an d ROM Monitor Commands set l o c a lu ser Exam ples This examp le sho ws how .
2-338 Catalyst 6500 Series Switch Command Refer e nce—Release 8.1 78-15474-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s set logging buffer set logging bu ffer T o lim it the nu mber of sy stem l oggi ng me ssa ges buffered, use t he set logging buffer command.
2-339 Catalyst 6500 S eries Switch C o mmand Reference —Release 8.1 78-15474-01 Chapter 2 Catalyst 6500 Series Switch an d ROM Monitor Commands set loggin g callhom e set logging ca llhome T o enable or disable the CallHome featu re, use the set logging callhome comman d.
2-340 Catalyst 6500 Series Switch Command Refer e nce—Release 8.1 78-15474-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s set logging callhome Relat e d Commands clear lo .
2-341 Catalyst 6500 S eries Switch C o mmand Reference —Release 8.1 78-15474-01 Chapter 2 Catalyst 6500 Series Switch an d ROM Monitor Commands set logg in g callhome d esti nat ion set logging ca l.
2-342 Catalyst 6500 Series Switch Command Refer e nce—Release 8.1 78-15474-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s set logging callhome destination Console> (enable) set logging callhome destination adminjane@cisco.
2-343 Catalyst 6500 S eries Switch C o mmand Reference —Release 8.1 78-15474-01 Chapter 2 Catalyst 6500 Series Switch an d ROM Monitor Commands set loggin g callhom e f rom set logging ca llhome from T o set t h e Fro m e-mai l addres s used by the Ca llHome feat ure, use th e s et logging callhome fr om comm and.
2-344 Catalyst 6500 Series Switch Command Refer e nce—Release 8.1 78-15474-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s set logg ing call home reply- to set logging ca llhome reply-t o T o set the Reply-to e-mail ad dress, use the set logging c a llhome r eply-to comman d.
2-345 Catalyst 6500 S eries Switch C o mmand Reference —Release 8.1 78-15474-01 Chapter 2 Catalyst 6500 Series Switch an d ROM Monitor Commands set loggin g callhom e s everity set logging ca llhome severity T o specify the CallHo me sev erity lev el o f system messages to captu re, use the set logging callhome severity command .
2-346 Catalyst 6500 Series Switch Command Refer e nce—Release 8.1 78-15474-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s set logging callhome severity Exam ples This exam.
2-347 Catalyst 6500 S eries Switch C o mmand Reference —Release 8.1 78-15474-01 Chapter 2 Catalyst 6500 Series Switch an d ROM Monitor Commands set loggin g callhome s mtp-s erv er set logging ca ll.
2-348 Catalyst 6500 Series Switch Command Refer e nce—Release 8.1 78-15474-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s set logging console set logging co nsole T o enable and disable the sendi ng of sy stem l ogging messages to the console , use t he set logging co nsole comm and.
2-349 Catalyst 6500 S eries Switch C o mmand Reference —Release 8.1 78-15474-01 Chapter 2 Catalyst 6500 Series Switch an d ROM Monitor Commands set logg in g history set logging hist ory T o s et the numbe r an d s ev erity level of sysl og me ssa ges sent t o the sysl og history ta ble, u se the se t log ging his tor y command .
2-350 Catalyst 6500 Series Switch Command Refer e nce—Release 8.1 78-15474-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s set loggi ng level set logging leve l T o set the faci lity and se verity lev el used when logging system messages, use the se t logging level comm and.
2-351 Catalyst 6500 S eries Switch C o mmand Reference —Release 8.1 78-15474-01 Chapter 2 Catalyst 6500 Series Switch an d ROM Monitor Commands set l o g g in g leve l Defaults The defau lt is faci lity is set to all , and leve l is se t to 0 . Comma nd T ypes Swit ch co mman d.
2-352 Catalyst 6500 Series Switch Command Refer e nce—Release 8.1 78-15474-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s set loggi ng level Exam ples This example shows h.
2-353 Catalyst 6500 S eries Switch C o mmand Reference —Release 8.1 78-15474-01 Chapter 2 Catalyst 6500 Series Switch an d ROM Monitor Commands set logg ing se rve r set logging server T o ena ble a.
2-354 Catalyst 6500 Series Switch Command Refer e nce—Release 8.1 78-15474-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s set logging server Comma nd T ypes Swit ch co mman d. Command Mode s Pri vile ged. Usage Guid el i nes Y ou ca n also se t the loggin g lev el by using th e set l ogging level command.
2-355 Catalyst 6500 S eries Switch C o mmand Reference —Release 8.1 78-15474-01 Chapter 2 Catalyst 6500 Series Switch an d ROM Monitor Commands set l o g g in g sess io n set logging sessi on T o enable o r disab le the sending of sy stem log ging me ssages to the c urrent log in session , use the set logging session co mmand .
2-356 Catalyst 6500 Series Switch Command Refer e nce—Release 8.1 78-15474-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s set logging telnet set logging teln et T o enab le or dis able loggi ng on T elnet session s, use the set loggin g telnet command .
2-357 Catalyst 6500 S eries Switch C o mmand Reference —Release 8.1 78-15474-01 Chapter 2 Catalyst 6500 Series Switch an d ROM Monitor Commands set l o g g in g tim esta mp set logging timestamp T o enab le or disabl e the time -stamp displ ay on system logging m essages, us e the set logg ing times tamp comm and.
Chapter 2 Ca talyst 6 500 Series Swi tch and ROM M onitor Comm ands set logout 2-358 Catalyst 6500 Series Switch Command Refer e nce—Release 8.1 78-15474-01 22 set logout T o set the number of minutes until th e system d isconnects an idle se ssion automatica lly , use the set logout command.
2-359 Catalyst 6500 S eries Switch C o mmand Reference —Release 8.1 78-15474-01 Chapter 2 Catalyst 6500 Series Switch an d ROM Monitor Commands set m l s ag in gt ime set mls agingtime T o specify the MLS agin g time of shortcuts to an MLS entry in the Catalyst 6500 series switches, use the set mls agingtime comm and.
2-360 Catalyst 6500 Series Switch Command Refer e nce—Release 8.1 78-15474-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s set mls agingti m e If you ente r any of the set mls commands on a Cat a lyst 65 00 series sw itch without MLS, this wa rning message di splays: MLS not supported on feature card .
2-361 Catalyst 6500 S eries Switch C o mmand Reference —Release 8.1 78-15474-01 Chapter 2 Catalyst 6500 Series Switch an d ROM Monitor Commands set m l s ag in gt ime Relat e d Commands clear mls st.
2-362 Catalyst 6500 Series Switch Command Refer e nce—Release 8.1 78-15474-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s set mls bridged-flow-statistics set mls bridged-f low-statistics T o enable o r disable sta tistics for bridged flo ws for specif ied VLANs, use the se t mls bridged- flow-s tat istics command.
2-363 Catalyst 6500 S eries Switch C o mmand Reference —Release 8.1 78-15474-01 Chapter 2 Catalyst 6500 Series Switch an d ROM Monitor Commands set mls cef l oad -balan ce set mls cef load-bal ance T o in cl ude or exclu de L ayer 4 por ts in a l oa d-b ala nci ng hash, use th e se t m ls cef load-balanc e comm an d.
2-364 Catalyst 6500 Series Switch Command Refer e nce—Release 8.1 78-15474-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s set mls cef per-prefix-statistics set mls cef per-prefix-statistics T o set MLS CEF per -prefix s tatistics mode, use the set m ls c ef per-pr efix statistics command.
2-365 Catalyst 6500 S eries Switch C o mmand Reference —Release 8.1 78-15474-01 Chapter 2 Catalyst 6500 Series Switch an d ROM Monitor Commands set mls excl ude prot oco l set mls exclude protoco l .
2-366 Catalyst 6500 Series Switch Command Refer e nce—Release 8.1 78-15474-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s set mls flow set mls flow T o specif y the minim um flo w mask used for MLS, use the set mls flow comman d.
2-367 Catalyst 6500 S eries Switch C o mmand Reference —Release 8.1 78-15474-01 Chapter 2 Catalyst 6500 Series Switch an d ROM Monitor Commands set m ls flow Exam ples Th ese examples show how to specify that only expired flows to subnet 171. 69.194.
2-368 Catalyst 6500 Series Switch Command Refer e nce—Release 8.1 78-15474-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s set m ls nd e set mls nde T o conf ig ure the Net.
2-369 Catalyst 6500 S eries Switch C o mmand Reference —Release 8.1 78-15474-01 Chapter 2 Catalyst 6500 Series Switch an d ROM Monitor Commands set m ls nde Defaults The def aults are N etflo w Data Export v ersion 7, and all exp ired flo ws are expo rted until th e f ilter is specif ied explicitly .
2-370 Catalyst 6500 Series Switch Command Refer e nce—Release 8.1 78-15474-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s set m ls nd e Use th e foll ow ing s yntax to speci fy an IP subn et address : • ip_subnet _addr —T his i s the sho rt su bnet addr e ss form at.
2-371 Catalyst 6500 S eries Switch C o mmand Reference —Release 8.1 78-15474-01 Chapter 2 Catalyst 6500 Series Switch an d ROM Monitor Commands set m ls nde This e xample sho ws how to specify that .
2-372 Catalyst 6500 Series Switch Command Refer e nce—Release 8.1 78-15474-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s set mls rate set mls rate T o set the rate at which inde x-directed pac kets are sent to the MSFC , use the set mls rate comm and.
2-373 Catalyst 6500 S eries Switch C o mmand Reference —Release 8.1 78-15474-01 Chapter 2 Catalyst 6500 Series Switch an d ROM Monitor Commands set mls sta ti st ic s protocol set mls statistics proto col T o add protocols to the protocols stat istics list, use the set mls stat isti cs protocol command.
2-374 Catalyst 6500 Series Switch Command Refer e nce—Release 8.1 78-15474-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s set mls verify set mls verify T o enab le or disab le ch ecksu m or packet ch eckin g based on packe t lengt h, use the set mls verify comm and.
2-375 Catalyst 6500 S eries Switch C o mmand Reference —Release 8.1 78-15474-01 Chapter 2 Catalyst 6500 Series Switch an d ROM Monitor Commands set ml s verif y Exam ples This examp le sho ws how to.
2-376 Catalyst 6500 Series Switch Command Refer e nce—Release 8.1 78-15474-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s set module set module T o enab le or disa ble a m odule, use th e set module comm and. set m o du le en a ble | disable mod Syntax Descript ion Defaults The def ault is all module s are en abled.
2-377 Catalyst 6500 S eries Switch C o mmand Reference —Release 8.1 78-15474-01 Chapter 2 Catalyst 6500 Series Switch an d ROM Monitor Commands set modul e This exampl e shows ho w t o disable mod ule 2 when connect ed via a T elnet sessi on: Console> (enable) set module disable 2 This command may disconnect your telnet session.
2-378 Catalyst 6500 Series Switch Command Refer e nce—Release 8.1 78-15474-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s set module na me set module name T o set th e name for a module, use the set module name command.
2-379 Catalyst 6500 S eries Switch C o mmand Reference —Release 8.1 78-15474-01 Chapter 2 Catalyst 6500 Series Switch an d ROM Monitor Commands set modul e po wer set module power T o turn the po wer on or off to a module , use the set module pow e r comman d.
2-380 Catalyst 6500 Series Switch Command Refer e nce—Release 8.1 78-15474-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s set module shutdown set module shutdown T o shut down the N AM and Intrusion Dete ction Syste m Module (I DSM), use the set module shutdown comm and.
2-381 Catalyst 6500 S eries Switch C o mmand Reference —Release 8.1 78-15474-01 Chapter 2 Catalyst 6500 Series Switch an d ROM Monitor Commands set msfcaut ostate set msfcautostate T o enable o r di.
2-382 Catalyst 6500 Series Switch Command Refer e nce—Release 8.1 78-15474-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s set msmautostate set msmautost ate T o en able or disa ble th e line protocol st ate de termina tion of t he MSMs due to port state ch ange s, use the set msmautostate command .
2-383 Catalyst 6500 S eries Switch C o mmand Reference —Release 8.1 78-15474-01 Chapter 2 Catalyst 6500 Series Switch an d ROM Monitor Commands set m u ltic ast rou te r set multicast router T o conf igure a port manually as a multi cast router por t, use the se t multi cast router command .
2-384 Catalyst 6500 Series Switch Command Refer e nce—Release 8.1 78-15474-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s set n tp broa dcastclient set ntp broadcastc lient T o ena ble o r disab le NT P in br oadc ast- cli ent mode , use t h e set ntp broadcastclient comman d.
2-385 Catalyst 6500 S eries Switch C o mmand Reference —Release 8.1 78-15474-01 Chapter 2 Catalyst 6500 Series Switch an d ROM Monitor Commands set ntp broad castd el ay set ntp broadcastd elay T o conf igure a tim e-adjust ment fact or so t he Catalys t 6500 serie s switch can recei ve broadcast p ackets, use the set ntp broadcastdelay comm and.
2-386 Catalyst 6500 Series Switch Command Refer e nce—Release 8.1 78-15474-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s set n tp client set ntp client T o enable or disabl e a Catalyst 6500 ser ies switch as an NTP client, use the set ntp client command.
2-387 Catalyst 6500 S eries Switch C o mmand Reference —Release 8.1 78-15474-01 Chapter 2 Catalyst 6500 Series Switch an d ROM Monitor Commands set nt p server set ntp server T o s peci fy t he N T P server addr ess and co nfigure an N TP se rver au th en tica tio n key , us e the se t ntp server command.
2-388 Catalyst 6500 Series Switch Command Refer e nce—Release 8.1 78-15474-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s set ntp sum mertime set ntp summertime T o set th e clock ahead on e hour durin g dayli ght saving time, u se the set ntp summertime command.
2-389 Catalyst 6500 S eries Switch C o mmand Reference —Release 8.1 78-15474-01 Chapter 2 Catalyst 6500 Series Switch an d ROM Monitor Commands set nt p summert ime Exam ples Th is exampl e shows ho.
2-390 Catalyst 6500 Series Switch Command Refer e nce—Release 8.1 78-15474-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s set ntp time zone set ntp timezone T o conf igure the time o ff set from Gr ee nwi ch M ea n T im e, use the set ntp timezone comm and.
2-391 Catalyst 6500 S eries Switch C o mmand Reference —Release 8.1 78-15474-01 Chapter 2 Catalyst 6500 Series Switch an d ROM Monitor Commands set pa ssword set password T o chan ge the lo gin passw ord on the CLI , use the set password command. set password Syntax D escr i pti on This comm a nd ha s n o argume nts or keyword s.
2-392 Catalyst 6500 Series Switch Command Refer e nce—Release 8.1 78-15474-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s set pbf set pbf T o enable po licy - based for warding (PBF) and to s et a MA C address for th e PFC2, use the set pbf comm and.
2-393 Catalyst 6500 S eries Switch C o mmand Reference —Release 8.1 78-15474-01 Chapter 2 Catalyst 6500 Series Switch an d ROM Monitor Commands set pb f Relat e d Commands clear pbf show pbf.
2-394 Catalyst 6500 Series Switch Command Refer e nce—Release 8.1 78-15474-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s set pbf-map set pbf-map T o create security A CLs and to set adjace ncy inform ation, use the set pb f-map command.
2-395 Catalyst 6500 S eries Switch C o mmand Reference —Release 8.1 78-15474-01 Chapter 2 Catalyst 6500 Series Switch an d ROM Monitor Commands set p bf- m ap If you wan t to add entries other then redirect A CEs to the adjacenc y table, use the set security acl ip PBF_M AP_A CL_(VLA N_ID ) command.
2-396 Catalyst 6500 Series Switch Command Refer e nce—Release 8.1 78-15474-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s set pbf vlan set pbf vlan T o cre ate poli cy-based for ward (PBF ) Layer 2 CAM ent ries on a VLAN, use the set pb f vlan command .
2-397 Catalyst 6500 S eries Switch C o mmand Reference —Release 8.1 78-15474-01 Chapter 2 Catalyst 6500 Series Switch an d ROM Monitor Commands set port arp-i nspec tion set port arp-ins pection T o set Addre ss Recogni tion Protocol (ARP) inspec tion thre sholds on a per-port basi s, use the set por t arp-inspection comman d.
Chapter 2 Ca talyst 6 500 Series Swi tch and ROM M onitor Comm ands set por t auxiliaryvlan 2-398 Catalyst 6500 Series Switch Command Refer e nce—Release 8.1 78-15474-01 2 set port auxiliaryv lan T o conf ig ure the auxiliary VLA N ports, use the set port auxiliaryvlan comm and.
2-399 Catalyst 6500 S eries Switch C o mmand Reference —Release 8.1 78-15474-01 Chapter 2 Catalyst 6500 Series Switch an d ROM Monitor Commands set port auxi liaryv lan Exam ples This example sh o w.
2-400 Catalyst 6500 Series Switch Command Refer e nce—Release 8.1 78-15474-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s set po rt br oa dca s t set port broadca st T o set broadcast, multica st, or unicast suppressi on for one or more ports, use the set port broadcast command.
2-401 Catalyst 6500 S eries Switch C o mmand Reference —Release 8.1 78-15474-01 Chapter 2 Catalyst 6500 Series Switch an d ROM Monitor Commands set port b roa dcast Exam ples This example sho ws how to limit broadcast tra ff ic to 20 percent: Console> (enable) set port broadcast 4/3 20% Port 4/3 broadcast traffic limited to 20.
2-402 Catalyst 6500 Series Switch Command Refer e nce—Release 8.1 78-15474-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s set port c hannel set port channel T o con figure E the rCh an nel on E th erne t m odule p orts, u se the set port channel comm and.
2-403 Catalyst 6500 S eries Switch C o mmand Reference —Release 8.1 78-15474-01 Chapter 2 Catalyst 6500 Series Switch an d ROM Monitor Commands set port chan nel Defaults The def ault is EtherChann el is set to auto and silent on all module port s. The de faults for fra me distribution ar e ip and both .
2-404 Catalyst 6500 Series Switch Command Refer e nce—Release 8.1 78-15474-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s set port c hannel Note With software re leas es 6 .2( 1) a nd ear lier, the 6- and 9- slot C ataly st 6500 se ries swi tch es supp ort a maximum of 12 8 EtherCh annels.
2-405 Catalyst 6500 S eries Switch C o mmand Reference —Release 8.1 78-15474-01 Chapter 2 Catalyst 6500 Series Switch an d ROM Monitor Commands set port chan nel Relat e d Commands show channel sho .
2-406 Catalyst 6500 Series Switch Command Refer e nce—Release 8.1 78-15474-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s set port c ops set port cops T o create port role s, use the set port cops command. set port cops mod / port rol e s ro l e 1 [ ro l e 2 ].
2-407 Catalyst 6500 S eries Switch C o mmand Reference —Release 8.1 78-15474-01 Chapter 2 Catalyst 6500 Series Switch an d ROM Monitor Commands set port debo unce set port debounce T o enabl e or disab le the de bounce t imer or co nfigure the time r setting on a per-port basis , use the set port debounce command.
2-408 Catalyst 6500 Series Switch Command Refer e nce—Release 8.1 78-15474-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s set po rt de bo unc e For 10/100 ports and 100BAS.
2-409 Catalyst 6500 S eries Switch C o mmand Reference —Release 8.1 78-15474-01 Chapter 2 Catalyst 6500 Series Switch an d ROM Monitor Commands set port disab le set port disable T o disa ble a port or a ra nge of por ts, use the set port disable co mmand .
2-410 Catalyst 6500 Series Switch Command Refer e nce—Release 8.1 78-15474-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s set port dot1q-all-tagged set port dot1q-all-tagged T o enable the 802.1 Q tagging feature o n specif ic ports, use the set port do t1q-all-tagged comm and.
2-411 Catalyst 6500 S eries Switch C o mmand Reference —Release 8.1 78-15474-01 Chapter 2 Catalyst 6500 Series Switch an d ROM Monitor Commands set port dot 1q-all-tagg ed Relat e d Commands set dot.
2-412 Catalyst 6500 Series Switch Command Refer e nce—Release 8.1 78-15474-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s set po rt dot1 qtu nn el set port dot1qtunne l T o co nfigure th e dot1 q t un ne l mo de f or t he po rt , use t he set port dot 1qtunnel command.
2-413 Catalyst 6500 S eries Switch C o mmand Reference —Release 8.1 78-15474-01 Chapter 2 Catalyst 6500 Series Switch an d ROM Monitor Commands set port dot 1qtunnel This examp le shows the output i.
2-414 Catalyst 6500 Series Switch Command Refer e nce—Release 8.1 78-15474-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s set po rt dot1x set port dot1x T o conf igure do t1x on a port, u se the set port dot1x comman d.
2-415 Catalyst 6500 S eries Switch C o mmand Reference —Release 8.1 78-15474-01 Chapter 2 Catalyst 6500 Series Switch an d ROM Monitor Commands set port dot1x Defaults The def ault settings are as follo ws: • The defaul t port _control_value is f orce-au thorized .
2-416 Catalyst 6500 Series Switch Command Refer e nce—Release 8.1 78-15474-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s set po rt dot1x This exam ple shows how to in itia lize dot 1x on a po rt: Console> (enable) set port dot1x 4/1 initialize dot1x port 4/1 initializing.
2-417 Catalyst 6500 S eries Switch C o mmand Reference —Release 8.1 78-15474-01 Chapter 2 Catalyst 6500 Series Switch an d ROM Monitor Commands set port dupl ex set port duplex T o configu re the dup lex type of a n Ethe rn et p ort o r a ra nge o f p ort s, use the set port duplex comm and .
2-418 Catalyst 6500 Series Switch Command Refer e nce—Release 8.1 78-15474-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s set por t enable set port enable T o ena bl e a port or a r ang e of po rts, use th e se t port e nable command.
2-419 Catalyst 6500 S eries Switch C o mmand Reference —Release 8.1 78-15474-01 Chapter 2 Catalyst 6500 Series Switch an d ROM Monitor Commands set port errdi sable-t ime out set port errdisable-timeout T o prevent an er rdisabl ed port fr om bei ng enab led, use t he set port e rrdisable-time out comm and.
2-420 Catalyst 6500 Series Switch Command Refer e nce—Release 8.1 78-15474-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s set port flowcontrol set port flowcontrol T o co nf igure a port to send or recei ve p ause fr ames, use the set por t flowcon tr ol comm and.
2-421 Catalyst 6500 S eries Switch C o mmand Reference —Release 8.1 78-15474-01 Chapter 2 Catalyst 6500 Series Switch an d ROM Monitor Commands set port flowcont rol Ta b l e 2 - 1 6 descri bes guid eli nes for differe nt c onfigura tions o f the send a nd re ce i ve ke ywor ds.
2-422 Catalyst 6500 Series Switch Command Refer e nce—Release 8.1 78-15474-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s set p ort gm rp set port gmrp T o enable or disable GMRP on the specified ports in all VLANs, use the set port gmrp command .
2-423 Catalyst 6500 S eries Switch C o mmand Reference —Release 8.1 78-15474-01 Chapter 2 Catalyst 6500 Series Switch an d ROM Monitor Commands set port gvrp set port gvrp T o enable or disable GVRP on the specif ied ports in all VLA Ns, use the set port gvrp command.
2-424 Catalyst 6500 Series Switch Command Refer e nce—Release 8.1 78-15474-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s set port g vrp This examp le shows what happens i.
2-425 Catalyst 6500 S eries Switch C o mmand Reference —Release 8.1 78-15474-01 Chapter 2 Catalyst 6500 Series Switch an d ROM Monitor Commands set po rt host set port host T o optimize the port co n figur ation for a host connec tion, use the set port host command .
2-426 Catalyst 6500 Series Switch Command Refer e nce—Release 8.1 78-15474-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s set p ort inlinepower set port inlinepower T o s et the i nli ne power mo de of a po rt or group of p orts, u se t he set port inline power command .
2-427 Catalyst 6500 S eries Switch C o mmand Reference —Release 8.1 78-15474-01 Chapter 2 Catalyst 6500 Series Switch an d ROM Monitor Commands set por t inlinepow er This exam ple sh ows the o utput i f th e inl ine power fea tu re is not s uppo rte d: Console> (enable) set port inlinepower 2/3-9 auto Feature not supported on module 2.
2-428 Catalyst 6500 Series Switch Command Refer e nce—Release 8.1 78-15474-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s set port jumbo set port jumbo T o enab le or dis able the jumbo frame fea ture on a per- port ba sis, use the set port ju mbo comm an d.
2-429 Catalyst 6500 S eries Switch C o mmand Reference —Release 8.1 78-15474-01 Chapter 2 Catalyst 6500 Series Switch an d ROM Monitor Commands set port l2 prot ocol-tun nel set port l2protoco l-tunnel T o set La yer 2 proto col tunnel ing para meters, use the set port l2protocol-tunnel command.
2-430 Catalyst 6500 Series Switch Command Refer e nce—Release 8.1 78-15474-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s set port l2protocol- tunnel • 20 Layer 2 pro to.
2-431 Catalyst 6500 S eries Switch C o mmand Reference —Release 8.1 78-15474-01 Chapter 2 Catalyst 6500 Series Switch an d ROM Monitor Commands set port lacp-cha nnel set port lacp-channe l T o set .
2-432 Catalyst 6500 Series Switch Command Refer e nce—Release 8.1 78-15474-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s set p ort lacp -channel • Y ou ca n assig n a ma ximu m o f 8 port s to a n a dmini str ative key .
2-433 Catalyst 6500 S eries Switch C o mmand Reference —Release 8.1 78-15474-01 Chapter 2 Catalyst 6500 Series Switch an d ROM Monitor Commands set port m acro set port macro T o execute a co nfiguration ma cro on a per-port basis, us e the set port macr o comma nd.
2-434 Catalyst 6500 Series Switch Command Refer e nce—Release 8.1 78-15474-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s set port macro Exam ples This exampl e sho w s ho.
2-435 Catalyst 6500 S eries Switch C o mmand Reference —Release 8.1 78-15474-01 Chapter 2 Catalyst 6500 Series Switch an d ROM Monitor Commands set port m acro VLAN Mod/Ports ---- ----------------------- 32 3/1 16/1 Port 3/1 will not send out CDP packets with AuxiliaryVlan information.
2-436 Catalyst 6500 Series Switch Command Refer e nce—Release 8.1 78-15474-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s set port membership set port membership T o set t h e VLAN membership assignmen t to a port, u se the set port membership comm and.
2-437 Catalyst 6500 S eries Switch C o mmand Reference —Release 8.1 78-15474-01 Chapter 2 Catalyst 6500 Series Switch an d ROM Monitor Commands set port m ember ship Relat e d Commands set pvlan set.
2-438 Catalyst 6500 Series Switch Command Refer e nce—Release 8.1 78-15474-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s set port name set port name T o co nf igure a name for a port, use th e set port name command.
2-439 Catalyst 6500 S eries Switch C o mmand Reference —Release 8.1 78-15474-01 Chapter 2 Catalyst 6500 Series Switch an d ROM Monitor Commands set p ort nego tia t ion set port negotiatio n T o enabl e or disab le the l ink negotiat ion prot ocol on th e specified port , use t he set port negotiation comm an d.
2-440 Catalyst 6500 Series Switch Command Refer e nce—Release 8.1 78-15474-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s set por t protocol set port protocol T o enab le or dis able prot ocol member ship of por ts, use the se t port protocol co mman d.
2-441 Catalyst 6500 S eries Switch C o mmand Reference —Release 8.1 78-15474-01 Chapter 2 Catalyst 6500 Series Switch an d ROM Monitor Commands set port prot ocol Relat e d Commands show port protoc.
2-442 Catalyst 6500 Series Switch Command Refer e nce—Release 8.1 78-15474-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s set po rt qo s set port qos T o specify wheth er an interface is interpreted as a physica l port or as a VLAN, use the set port qos comm and.
2-443 Catalyst 6500 S eries Switch C o mmand Reference —Release 8.1 78-15474-01 Chapter 2 Catalyst 6500 Series Switch an d ROM Monitor Commands set port qos This e xample sho ws the outp ut if you c.
2-444 Catalyst 6500 Series Switch Command Refer e nce—Release 8.1 78-15474-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s set por t qos auto qos set port qos autoqos T o appl y the auto matic Qo S feature on a pe r-port basis, use the set port qo s autoqos command.
2-445 Catalyst 6500 S eries Switch C o mmand Reference —Release 8.1 78-15474-01 Chapter 2 Catalyst 6500 Series Switch an d ROM Monitor Commands set por t qo s au toqos Relat e d Commands set qos a u.
2-446 Catalyst 6500 Series Switch Command Refer e nce—Release 8.1 78-15474-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s set port qos cos set port qos cos To set th e def ault val u e for all pa c kets th at hav e arri ve d throug h an un truste d p ort, use the set port qo s cos command.
2-447 Catalyst 6500 S eries Switch C o mmand Reference —Release 8.1 78-15474-01 Chapter 2 Catalyst 6500 Series Switch an d ROM Monitor Commands set p ort qos policy -source set port qos policy-source T o set the QoS policy source for all ports in the specifi ed module, use the set port qos policy-sourc e comm and.
2-448 Catalyst 6500 Series Switch Command Refer e nce—Release 8.1 78-15474-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s set port qo s policy-s ource This e xample shows .
2-449 Catalyst 6500 S eries Switch C o mmand Reference —Release 8.1 78-15474-01 Chapter 2 Catalyst 6500 Series Switch an d ROM Monitor Commands set por t qo s tr ust set port qos trust T o set the t.
2-450 Catalyst 6500 Series Switch Command Refer e nce—Release 8.1 78-15474-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s set port qos t rust Relat e d Commands set port q.
2-451 Catalyst 6500 S eries Switch C o mmand Reference —Release 8.1 78-15474-01 Chapter 2 Catalyst 6500 Series Switch an d ROM Monitor Commands set p ort qos trust -device set port qos trust-device T o co nfigure the t rus t mode on a por t on a speci fic device or module , use the set port qos trust-device comm and.
2-452 Catalyst 6500 Series Switch Command Refer e nce—Release 8.1 78-15474-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s set port q os trust-ext set port qos trust-ext T o conf igure the access port on a Cisco I P phone conn ected to th e switch por t, use the set port qos trust- ext com mand .
2-453 Catalyst 6500 S eries Switch C o mmand Reference —Release 8.1 78-15474-01 Chapter 2 Catalyst 6500 Series Switch an d ROM Monitor Commands set port rsv p ds bm-ele ction set port rsvp dsbm-elec.
2-454 Catalyst 6500 Series Switch Command Refer e nce—Release 8.1 78-15474-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s set port security set port security T o con figure p or t secur it y o n a por t or r ange of po rts, use th e set p o rt se c uri ty command .
2-455 Catalyst 6500 S eries Switch C o mmand Reference —Release 8.1 78-15474-01 Chapter 2 Catalyst 6500 Series Switch an d ROM Monitor Commands set po rt secur ity Usage Guid el i nes This c omm and is not sup port ed by t he NAM.
2-456 Catalyst 6500 Series Switch Command Refer e nce—Release 8.1 78-15474-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s set port security Relat e d Commands clear por t .
2-457 Catalyst 6500 S eries Switch C o mmand Reference —Release 8.1 78-15474-01 Chapter 2 Catalyst 6500 Series Switch an d ROM Monitor Commands set po rt speed set port speed T o conf igure the sp eed of a po rt interf ace, use the set port speed comman d.
2-458 Catalyst 6500 Series Switch Command Refer e nce—Release 8.1 78-15474-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s set port sync-restart-delay set port sync-restart-del ay T o s pecify the s ync hroni zati on re sta rt d ela y of a por t, use t he s et port sync- resta rt-delay com mand.
2-459 Catalyst 6500 S eries Switch C o mmand Reference —Release 8.1 78-15474-01 Chapter 2 Catalyst 6500 Series Switch an d ROM Monitor Commands set po rt trap set port trap T o enab l e or di sable .
2-460 Catalyst 6500 Series Switch Command Refer e nce—Release 8.1 78-15474-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s set port unicast -flood set port unicast-fl ood T o configure t he swit ch to drop Unicast Flood traffic on an Ether net port, use the set po rt unicast-flood comm and.
2-461 Catalyst 6500 S eries Switch C o mmand Reference —Release 8.1 78-15474-01 Chapter 2 Catalyst 6500 Series Switch an d ROM Monitor Commands set p ort uni c a s t- fl ood This exam ple sh ows how.
2-462 Catalyst 6500 Series Switch Command Refer e nce—Release 8.1 78-15474-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s set port vo ice inter face dh cp set port voice interface dhcp T o set t he port v oice interf ace for the DHCP , TFTP , and D NS server s, use the set po rt voi ce in t er fa ce dhcp comma nd.
2-463 Catalyst 6500 S eries Switch C o mmand Reference —Release 8.1 78-15474-01 Chapter 2 Catalyst 6500 Series Switch an d ROM Monitor Commands set port voi ce i nterface dhcp Exam ples This example.
2-464 Catalyst 6500 Series Switch Command Refer e nce—Release 8.1 78-15474-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s set port vtp set port vtp T o enable or disabl e VLAN Trunk Protocol (VTP) on a per-port basis, use th e set port vt p command.
2-465 Catalyst 6500 S eries Switch C o mmand Reference —Release 8.1 78-15474-01 Chapter 2 Catalyst 6500 Series Switch an d ROM Monitor Commands set power re dundanc y set power redundan cy T o tu rn redun da ncy b etwee n the p ower suppli es on or o ff, use the set power r edundancy command.
2-466 Catalyst 6500 Series Switch Command Refer e nce—Release 8.1 78-15474-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s set prompt set prompt T o change the prompt for the CLI, use the set prompt com mand. set prompt pr ompt_ stri ng Syntax Descript ion Defaults The de fault is the prom pt is set to Console >.
2-467 Catalyst 6500 S eries Switch C o mmand Reference —Release 8.1 78-15474-01 Chapter 2 Catalyst 6500 Series Switch an d ROM Monitor Commands set p rot o c o lf il ter set protocol filter T o acti.
2-468 Catalyst 6500 Series Switch Command Refer e nce—Release 8.1 78-15474-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s set pvlan set pvlan T o bind the iso lated or co mmunit y VLAN to the prim ary VLAN and assign the is olated or community ports to the pri va te VLAN, use the set pvlan comma nd.
2-469 Catalyst 6500 S eries Switch C o mmand Reference —Release 8.1 78-15474-01 Chapter 2 Catalyst 6500 Series Switch an d ROM Monitor Commands set pv lan Exam ples Th is example shows ho w to map V.
2-470 Catalyst 6500 Series Switch Command Refer e nce—Release 8.1 78-15474-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s set pvla n mapping set pvlan mapping T o map isolated or commun ity VLANs to the primary VLAN on the pr omiscuous port, use the set pvl an mapping comm an d.
2-471 Catalyst 6500 S eries Switch C o mmand Reference —Release 8.1 78-15474-01 Chapter 2 Catalyst 6500 Series Switch an d ROM Monitor Commands set pvlan ma pping Relat e d Commands clear pvlan mapp.
2-472 Catalyst 6500 Series Switch Command Refer e nce—Release 8.1 78-15474-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s set qos set qos T o turn on or turn of f QoS functionality on the switch , u se the set qos command.
2-473 Catalyst 6500 S eries Switch C o mmand Reference —Release 8.1 78-15474-01 Chapter 2 Catalyst 6500 Series Switch an d ROM Monitor Commands set q os a c l d efa ult- a cti on set qos acl defau lt-action T o set t he ACL default actions, use the set qos acl default-action command.
2-474 Catalyst 6500 Series Switch Command Refer e nce—Release 8.1 78-15474-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s set qos acl default-action Console> (enable).
2-475 Catalyst 6500 S eries Switch C o mmand Reference —Release 8.1 78-15474-01 Chapter 2 Catalyst 6500 Series Switch an d ROM Monitor Commands set q os a c l d efa ult- a cti on This exampl e shows.
2-476 Catalyst 6500 Series Switch Command Refer e nce—Release 8.1 78-15474-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s set qos acl ip set qos acl ip T o cre ate or add IP a ccess lists , use the set qos acl ip comm and.
2-477 Catalyst 6500 S eries Switch C o mmand Reference —Release 8.1 78-15474-01 Chapter 2 Catalyst 6500 Series Switch an d ROM Monitor Commands set qo s acl ip Defaults The def ault is there ar e no A CLs. Comma nd T ypes Swit ch co mman d. Command Mode s Pri vile ged.
2-478 Catalyst 6500 Series Switch Command Refer e nce—Release 8.1 78-15474-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s set qos acl ip The optio nal micr oflow micr ofl ow _na me an d aggrega te aggr egate_name key words and v ariables are used to c o nf igure polici ng i n the A CE.
2-479 Catalyst 6500 S eries Switch C o mmand Reference —Release 8.1 78-15474-01 Chapter 2 Catalyst 6500 Series Switch an d ROM Monitor Commands set qo s acl ip If the oper ator is positioned after th e sourc e and sour ce-wildcard, it must match the source po rt.
2-480 Catalyst 6500 Series Switch Command Refer e nce—Release 8.1 78-15474-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s set qos acl ip This example shows ho w to de fine an ICMP access li st: Console> (enable) set qos acl ip icmp_acl trust-dscp my-micro icmp 1.
2-481 Catalyst 6500 S eries Switch C o mmand Reference —Release 8.1 78-15474-01 Chapter 2 Catalyst 6500 Series Switch an d ROM Monitor Commands set qo s acl ipx set qos acl ipx T o defin e IPX access lists, use the set qos acl ipx command.
2-482 Catalyst 6500 Series Switch Command Refer e nce—Release 8.1 78-15474-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s set qos acl ipx The optio nal aggregate aggr e ga te_name keyword and variable are use d to configure policing i n the A CE.
2-483 Catalyst 6500 S eries Switch C o mmand Reference —Release 8.1 78-15474-01 Chapter 2 Catalyst 6500 Series Switch an d ROM Monitor Commands set qo s acl ipx Exam ples Th is exam pl e s h ows how to cr ea t e an I P X A CE: Console> (enable) set qos acl ipx my_IPXacl trust-cos aggregate my-agg -1 my_IPXacl editbuffer modified.
2-484 Catalyst 6500 Series Switch Command Refer e nce—Release 8.1 78-15474-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s set qos acl mac set qos acl mac T o define MAC access lists, use the se t qos acl mac comman d.
2-485 Catalyst 6500 S eries Switch C o mmand Reference —Release 8.1 78-15474-01 Chapter 2 Catalyst 6500 Series Switch an d ROM Monitor Commands set qo s acl mac • Case sensiti ve • Cannot be a n.
2-486 Catalyst 6500 Series Switch Command Refer e nce—Release 8.1 78-15474-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s set qos acl map set qos acl map T o attach an A CL to a specified port o r VLAN, use the set qos ac l map comman d.
2-487 Catalyst 6500 S eries Switch C o mmand Reference —Release 8.1 78-15474-01 Chapter 2 Catalyst 6500 Series Switch an d ROM Monitor Commands set qo s acl map Commit ACL new_acl before mapping.
2-488 Catalyst 6500 Series Switch Command Refer e nce—Release 8.1 78-15474-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s set qos autoqos set qos autoqos T o apply automat ic QoS settings to all ports on the switch , use the set qos autoqos command.
2-489 Catalyst 6500 S eries Switch C o mmand Reference —Release 8.1 78-15474-01 Chapter 2 Catalyst 6500 Series Switch an d ROM Monitor Commands set q os b r id ged -m ic rof low- pol icin g set qos .
2-490 Catalyst 6500 Series Switch Command Refer e nce—Release 8.1 78-15474-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s set qos cos- dscp-map set qos cos-dsc p-map To set the CoS-to-DSCP mapping, use th e set qos cos-dscp-ma p command.
2-491 Catalyst 6500 S eries Switch C o mmand Reference —Release 8.1 78-15474-01 Chapter 2 Catalyst 6500 Series Switch an d ROM Monitor Commands set qos drop- thres hol d set qos drop-threshold T o p rogram t he tr ansmi t-queu e an d rece iv e-queue dr op thre sholds on all ports in the system, use t he set qos drop-thr eshold command.
2-492 Catalyst 6500 Series Switch Command Refer e nce—Release 8.1 78-15474-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s set qo s drop-thr eshold The number pr eceding the q letter in the port type dete rmines the number of t he queues that the har dware supports.
2-493 Catalyst 6500 S eries Switch C o mmand Reference —Release 8.1 78-15474-01 Chapter 2 Catalyst 6500 Series Switch an d ROM Monitor Commands set qos ds cp-cos- m ap set qos dscp-c os-map To set the DSCP-to-CoS mapping, use the set qos dscp-cos-map command .
2-494 Catalyst 6500 Series Switch Command Refer e nce—Release 8.1 78-15474-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s set qos dscp-m utatio n-table-map set qos dscp-mutat ion-table-map T o conf ig ure the DSCP mutation table map, use the set qos dsc p-mutation-table-map co mman d.
2-495 Catalyst 6500 S eries Switch C o mmand Reference —Release 8.1 78-15474-01 Chapter 2 Catalyst 6500 Series Switch an d ROM Monitor Commands set qos ip prec-ds cp-map set qos ipprec -dscp-map T o set t he IP prece dence-to-DSC P map, use the set qos ipprec-dscp-map co mmand.
2-496 Catalyst 6500 Series Switch Command Refer e nce—Release 8.1 78-15474-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s set qo s ipp rec -d sc p- ma p Exam ples Th is ex.
2-497 Catalyst 6500 S eries Switch C o mmand Reference —Release 8.1 78-15474-01 Chapter 2 Catalyst 6500 Series Switch an d ROM Monitor Commands set qo s mac-co s set qos mac-c os T o set the C oS value to the M A C ad dres s and VL AN pa ir, use the set qos mac-cos co mman d.
2-498 Catalyst 6500 Series Switch Command Refer e nce—Release 8.1 78-15474-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s set qos map set qos map T o map a specif ic CoS value to the transmit- or r ecei ve-pri o rity queues an d the thresholds per a vail a ble priority queue for all ports , use the set qos map comma nd.
2-499 Catalyst 6500 S eries Switch C o mmand Reference —Release 8.1 78-15474-01 Chapter 2 Catalyst 6500 Series Switch an d ROM Monitor Commands set qo s map Comma nd T ypes Swit ch co mman d.
2-500 Catalyst 6500 Series Switch Command Refer e nce—Release 8.1 78-15474-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s set qos map This example shows ho w to ma p the C.
2-501 Catalyst 6500 S eries Switch C o mmand Reference —Release 8.1 78-15474-01 Chapter 2 Catalyst 6500 Series Switch an d ROM Monitor Commands set qos poli ce d-dscp -m ap set qos policed -dscp-map T o set the m apping of p oliced in -profile DSCPs , use the set qos policed-dscp-map command.
2-502 Catalyst 6500 Series Switch Command Refer e nce—Release 8.1 78-15474-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s set qos policer set qos policer T o c r eat e a po li ci ng rule f or ACL, us e t he set qos policer comm and.
2-503 Catalyst 6500 S eries Switch C o mmand Reference —Release 8.1 78-15474-01 Chapter 2 Catalyst 6500 Series Switch an d ROM Monitor Commands set qo s polic er The exc ess rate must be greater than or equal to the norma l rate.
2-504 Catalyst 6500 Series Switch Command Refer e nce—Release 8.1 78-15474-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s set qo s policy-s ource set qos policy-source T o set t he QoS polic y source, use th e set qos policy-source com mand.
2-505 Catalyst 6500 S eries Switch C o mmand Reference —Release 8.1 78-15474-01 Chapter 2 Catalyst 6500 Series Switch an d ROM Monitor Commands set qos po lic y-sou rce This example shows the output.
2-506 Catalyst 6500 Series Switch Command Refer e nce—Release 8.1 78-15474-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s set qos rsvp set qos rsvp T o turn on or turn of .
2-507 Catalyst 6500 S eries Switch C o mmand Reference —Release 8.1 78-15474-01 Chapter 2 Catalyst 6500 Series Switch an d ROM Monitor Commands set qo s rsvp This e xample shows how to set t h e polic y timeout interv al: Console> (enable) set qos rsvp policy-timeout 45 RSVP database policy timeout set to 45 minutes.
2-508 Catalyst 6500 Series Switch Command Refer e nce—Release 8.1 78-15474-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s set qos rxq- ratio set qos rxq-ratio T o set the .
2-509 Catalyst 6500 S eries Switch C o mmand Reference —Release 8.1 78-15474-01 Chapter 2 Catalyst 6500 Series Switch an d ROM Monitor Commands set qos rxq-ra tio Exam ples This e xample s ho ws ho w to set t he receive- queue s ize rati o: Console> (enable) set qos rxq-ratio 1p1q0t 80 20 QoS rxq-ratio is set successfully.
2-510 Catalyst 6500 Series Switch Command Refer e nce—Release 8.1 78-15474-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s set qos statistics export set qos statistics ex port T o globally enable or disable statistics dat a gathering from hardw are, use the set qos statistics export comm and.
2-511 Catalyst 6500 S eries Switch C o mmand Reference —Release 8.1 78-15474-01 Chapter 2 Catalyst 6500 Series Switch an d ROM Monitor Commands set qos sta ti st ic s expor t agg regate set qos stat.
2-512 Catalyst 6500 Series Switch Command Refer e nce—Release 8.1 78-15474-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s set qos statistics export destinat ion set qos statistics ex port destinatio n T o specify the statisti cs data export dest ination address, use the set qos statistics export destinatio n comm and.
2-513 Catalyst 6500 S eries Switch C o mmand Reference —Release 8.1 78-15474-01 Chapter 2 Catalyst 6500 Series Switch an d ROM Monitor Commands set q os sta ti st ics e x por t in te rva l set qos s.
2-514 Catalyst 6500 Series Switch Command Refer e nce—Release 8.1 78-15474-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s set qos stati stics export port set qos statistics ex port port T o enable or disa ble statist ics data e xport on a por t, u s e th e set qos stat istics export po rt comman d.
2-515 Catalyst 6500 S eries Switch C o mmand Reference —Release 8.1 78-15474-01 Chapter 2 Catalyst 6500 Series Switch an d ROM Monitor Commands set qo s txq-rati o set qos txq-ratio T o set the amount of pack et b uf fer memory allocat ed to high-p riority tra f f ic and lo w-priority traf fic , use the set qos txq-ra tio comma nd.
2-516 Catalyst 6500 Series Switch Command Refer e nce—Release 8.1 78-15474-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s set qos txq-ratio Exam ples Th is e xample shows ho w to set the transmit-queue size ratio: Console> (enable) set qos txq-ratio 2q2t 75 25 QoS txq-ratio is set successfully.
2-517 Catalyst 6500 S eries Switch C o mmand Reference —Release 8.1 78-15474-01 Chapter 2 Catalyst 6500 Series Switch an d ROM Monitor Commands set qo s wred set qos wred T o conf igure the W RED thre shold pa rameters fo r the specif ied por t type, us e the set qos wred comm and.
2-518 Catalyst 6500 Series Switch Command Refer e nce—Release 8.1 78-15474-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s set qos wred Relat e d Commands clear qos co nf i.
2-519 Catalyst 6500 S eries Switch C o mmand Reference —Release 8.1 78-15474-01 Chapter 2 Catalyst 6500 Series Switch an d ROM Monitor Commands set qo s wrr set qos wrr To specify the weights th at d etermine ho w many pa ckets will transmit out of one queue before switchin g to the othe r queue, use the set qos wr r comm and.
2-520 Catalyst 6500 Series Switch Command Refer e nce—Release 8.1 78-15474-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s set qos wrr Exam ples Th is example shows how to specify the weights for queue 1 and queue 2 to 30 and 70: Console> (enable) set qos wrr 2q2t 30 70 QoS wrr ratio is set successfully.
2-521 Catalyst 6500 S eries Switch C o mmand Reference —Release 8.1 78-15474-01 Chapter 2 Catalyst 6500 Series Switch an d ROM Monitor Commands set radius attribute set radius attribute T o set attrib utes to the RADIUS A CCESS_REQUEST pack et, use the set radius attribute comman d.
2-522 Catalyst 6500 Series Switch Command Refer e nce—Release 8.1 78-15474-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s set radi us deadti me set radius dea dtime T o set the time to skip RADIUS serv er s that do not re ply to an au thentic ation request , use th e set radius deadtime comman d.
2-523 Catalyst 6500 S eries Switch C o mmand Reference —Release 8.1 78-15474-01 Chapter 2 Catalyst 6500 Series Switch an d ROM Monitor Commands set radius key set radius key T o set the encryptio n and authenticatio n for all communi cation betwee n the RADIUS client and the serv er, use the set radius key com mand.
2-524 Catalyst 6500 Series Switch Command Refer e nce—Release 8.1 78-15474-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s set ra dius retrans mit set radius retransmit T o speci fy the numbe r of tim es the RA DI US servers are trie d be fore giving up on the server , use the set radius retransmit com mand.
2-525 Catalyst 6500 S eries Switch C o mmand Reference —Release 8.1 78-15474-01 Chapter 2 Catalyst 6500 Series Switch an d ROM Monitor Commands set radius server set radius server T o set up the RA DIU S server, use the set radius ser ver command.
2-526 Catalyst 6500 Series Switch Command Refer e nce—Release 8.1 78-15474-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s set ra dius time out set radius timeout T o set the time between retransm issions to the RADIUS server , use the set radius timeout comman d.
2-527 Catalyst 6500 S eries Switch C o mmand Reference —Release 8.1 78-15474-01 Chapter 2 Catalyst 6500 Series Switch an d ROM Monitor Commands set rcp usern ame set rcp username To sp eci fy you r userna m e for r cp f ile tr ans fers, use th e s et rcp usern ame command.
Chapter 2 Ca talyst 6 500 Series Swi tch and ROM M onitor Comm ands set rgmp 2-528 Catalyst 6500 Series Switch Command Refer e nce—Release 8.1 78-15474-01 22 set rgmp T o enab le or dis able the Route r-Por ts Group Ma nage ment Pr otocol (RG MP) fe atur e on the swi tch, us e the set r gmp command.
2-529 Catalyst 6500 S eries Switch C o mmand Reference —Release 8.1 78-15474-01 Chapter 2 Catalyst 6500 Series Switch an d ROM Monitor Commands set rspan set rspan T o create re mote Switched Port An alyzer ( SP AN) sessions, use the set rspan comm and.
2-530 Catalyst 6500 Series Switch Command Refer e nce—Release 8.1 78-15474-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s set r spa n Defaults The de faults are as fo llows: • Remote SP AN is disabled. • No VLAN f ilterin g.
2-531 Catalyst 6500 S eries Switch C o mmand Reference —Release 8.1 78-15474-01 Chapter 2 Catalyst 6500 Series Switch an d ROM Monitor Commands set rspan Exam ples Th is exampl e sh ows how to disab le al l en able d sour ce s ession s: Console> (enable) set rspan disable source all This command will disable all remote span source session(s).
2-532 Catalyst 6500 Series Switch Command Refer e nce—Release 8.1 78-15474-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s set secur ity acl adj acency set security acl adjac ency T o set an entr y for th e adjac ency ta ble, u se the set securi ty acl adjacency command.
2-533 Catalyst 6500 S eries Switch C o mmand Reference —Release 8.1 78-15474-01 Chapter 2 Catalyst 6500 Series Switch an d ROM Monitor Commands set sec urity a cl a rp-inspec tion set security acl arp -inspecti on T o configure Ad dress Res olution Proto col (ARP) inspection fe ature s, use the set se curity acl arp-inspection comman d.
2-534 Catalyst 6500 Series Switch Command Refer e nce—Release 8.1 78-15474-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s set security acl arp-inspection Use the set se curity acl arp-inspectio n command in conjun ction w ith the set security acl ip arp-inspection command .
2-535 Catalyst 6500 S eries Switch C o mmand Reference —Release 8.1 78-15474-01 Chapter 2 Catalyst 6500 Series Switch an d ROM Monitor Commands set sec urity a cl c apture-por ts set security acl ca.
2-536 Catalyst 6500 Series Switch Command Refer e nce—Release 8.1 78-15474-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s set security acl feature ratelimit set security a.
2-537 Catalyst 6500 S eries Switch C o mmand Reference —Release 8.1 78-15474-01 Chapter 2 Catalyst 6500 Series Switch an d ROM Monitor Commands set secu r it y acl ip set security acl ip T o c reate a n ew en try i n a stan dard IP VA CL a nd ap pend th e ne w en try at th e end of t he VA CL, u se the set security a cl ip command.
2-538 Catalyst 6500 Series Switch Command Refer e nce—Release 8.1 78-15474-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s set security acl ip mod if y editbu ffer_ index (Optional ) Replace s an A CE with the new A C E. log ( O pt i on a l ) Logs denied packets.
2-539 Catalyst 6500 S eries Switch C o mmand Reference —Release 8.1 78-15474-01 Chapter 2 Catalyst 6500 Series Switch an d ROM Monitor Commands set secu r it y acl ip Defaults Ther e are no def ault ACLs an d no defa ult ACL-V LAN ma ppings. By de fault, AR P is enabled.
2-540 Catalyst 6500 Series Switch Command Refer e nce—Release 8.1 78-15474-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s set security acl ip • Use the ke yword any as an abbrev iation for a sour ce and sour ce-wil dcar d of 0.
2-541 Catalyst 6500 S eries Switch C o mmand Reference —Release 8.1 78-15474-01 Chapter 2 Catalyst 6500 Series Switch an d ROM Monitor Commands set secu r it y acl ip For IP , you ca n enter the fo .
2-542 Catalyst 6500 Series Switch Command Refer e nce—Release 8.1 78-15474-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s set security acl ip Relat e d Commands clea r sec.
2-543 Catalyst 6500 S eries Switch C o mmand Reference —Release 8.1 78-15474-01 Chapter 2 Catalyst 6500 Series Switch an d ROM Monitor Commands set secu r it y acl ipx set security acl ipx T o cr ea te a new entry in a stan dard IPX V A CL an d t o appe nd t he new entry at the end of the V A CL , use the set security acl ipx command .
2-544 Catalyst 6500 Series Switch Command Refer e nce—Release 8.1 78-15474-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s set security acl ipx If you use the capture keyword, the ports that captu re the traf fic and t ransmit out are spe cified by ent erin g th e set se c uri t y a cl ca ptu r e-p or ts co mmand .
2-545 Catalyst 6500 S eries Switch C o mmand Reference —Release 8.1 78-15474-01 Chapter 2 Catalyst 6500 Series Switch an d ROM Monitor Commands set secu r it y acl ipx Exam ples Th is exampl e sh ows how to bloc k tr aff ic f rom a specified sou rc e IPX addre ss: Console> (enable) set security acl ipx IPXACL1 deny 1.
2-546 Catalyst 6500 Series Switch Command Refer e nce—Release 8.1 78-15474-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s set security acl log set security acl log T o c on figure th e s ecur i ty ACL log tab l e, us e th e set secur ity acl log comman d.
2-547 Catalyst 6500 S eries Switch C o mmand Reference —Release 8.1 78-15474-01 Chapter 2 Catalyst 6500 Series Switch an d ROM Monitor Commands set secu r it y acl log This exampl e shows ho w to disabl e rate lim iting: Console> (enable) set security acl log rate-limit 0 CAUTION: Rate limit for logging eligible packet is disabled.
2-548 Catalyst 6500 Series Switch Command Refer e nce—Release 8.1 78-15474-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s set security acl mac set security acl mac T o cr .
2-549 Catalyst 6500 S eries Switch C o mmand Reference —Release 8.1 78-15474-01 Chapter 2 Catalyst 6500 Series Switch an d ROM Monitor Commands set secu r i t y acl mac • Cannot be a num be r • .
2-550 Catalyst 6500 Series Switch Command Refer e nce—Release 8.1 78-15474-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s set security acl map set security acl map T o map an exi sting V A CL to a VLAN, use the set security ac l map comm and.
2-551 Catalyst 6500 S eries Switch C o mmand Reference —Release 8.1 78-15474-01 Chapter 2 Catalyst 6500 Series Switch an d ROM Monitor Commands set secu r i t y acl map This e xampl e sho ws t he ou.
2-552 Catalyst 6500 Series Switch Command Refer e nce—Release 8.1 78-15474-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s set snmp set snmp T o enable or disable the processing of SNMP requests to the switch and SNMP traps from the switch, use the set snmp comm and.
2-553 Catalyst 6500 S eries Switch C o mmand Reference —Release 8.1 78-15474-01 Chapter 2 Catalyst 6500 Series Switch an d ROM Monitor Commands set sn mp access set snmp access T o d efine th e acc ess ri ght s of an SN MP grou p, u se the set snmp access command.
2-554 Catalyst 6500 Series Switch Command Refer e nce—Release 8.1 78-15474-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s set snmp access • write write view is NULL OI D. • notify notifyvie w is NULL OID. • cont ext contextname is a NULL string.
2-555 Catalyst 6500 S eries Switch C o mmand Reference —Release 8.1 78-15474-01 Chapter 2 Catalyst 6500 Series Switch an d ROM Monitor Commands set sn mp access- list set snmp access-list T o specify an access lis t number fo r a host or group of host s, use the set snmp access-list command.
2-556 Catalyst 6500 Series Switch Command Refer e nce—Release 8.1 78-15474-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s set snmp ac cess-list Relat e d Commands clear sn.
2-557 Catalyst 6500 S eries Switch C o mmand Reference —Release 8.1 78-15474-01 Chapter 2 Catalyst 6500 Series Switch an d ROM Monitor Commands set sn mp buffer set snmp buffer T o set t he size of the SNM P UDP socket recei ve b uf fer , use t h e set snmp buffer command.
2-558 Catalyst 6500 Series Switch Command Refer e nce—Release 8.1 78-15474-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s set snmp chassis-a lias set snmp chassis-alias T o set t he chassis al ias and sav e it in NVRAM an d in the c o nfi guration fi le, use the set snmp chassis-alias command.
2-559 Catalyst 6500 S eries Switch C o mmand Reference —Release 8.1 78-15474-01 Chapter 2 Catalyst 6500 Series Switch an d ROM Monitor Commands set snmp communi ty set snmp community T o set SNMP comm unities and asso ciated acce ss types, us e the set snmp community comman d.
2-560 Catalyst 6500 Series Switch Command Refer e nce—Release 8.1 78-15474-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s set snmp comm unity There are three co nf igurab le SNMP communi ties, one fo r each acce ss type.
2-561 Catalyst 6500 S eries Switch C o mmand Reference —Release 8.1 78-15474-01 Chapter 2 Catalyst 6500 Series Switch an d ROM Monitor Commands set snmp community-ext set snmp community-ext T o set ad d itional c o mmunity str ings, use the set snmp c ommunity-ext command.
2-562 Catalyst 6500 Series Switch Command Refer e nce—Release 8.1 78-15474-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s set snmp com munity-ext This e xample sho ws how .
2-563 Catalyst 6500 S eries Switch C o mmand Reference —Release 8.1 78-15474-01 Chapter 2 Catalyst 6500 Series Switch an d ROM Monitor Commands set snmp ext endedrmo n netflow set snmp exten dedrmon netfl ow T o enabl e or disab le the SNMP extend ed RMON support for t he N A M module , use the set snmp extendedrmon netflow com m and.
2-564 Catalyst 6500 Series Switch Command Refer e nce—Release 8.1 78-15474-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s set snmp group set snmp group T o establi s h th e r elat i ons h ip bet ween an SNMP g rou p an d a us e r with a sp ecif ic security mo del, use th e set snmp group command.
2-565 Catalyst 6500 S eries Switch C o mmand Reference —Release 8.1 78-15474-01 Chapter 2 Catalyst 6500 Series Switch an d ROM Monitor Commands set sn mp ifalias set snmp ifalias T o set t he SNMP inte r face alias, u se the set snmp ifalias co mman d.
2-566 Catalyst 6500 Series Switch Command Refer e nce—Release 8.1 78-15474-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s set snmp notify set snmp notify T o set t he notifynam e entry in the snmp NotifyT able and the n otifytag en try in the snmp T argetAdd rT abl e, u s e the se t snmp notify command.
2-567 Catalyst 6500 S eries Switch C o mmand Reference —Release 8.1 78-15474-01 Chapter 2 Catalyst 6500 Series Switch an d ROM Monitor Commands set sn mp rmon set snmp rmon T o ena ble or disab le SNMP RM ON support, use the se t snmp rmon comma nd.
2-568 Catalyst 6500 Series Switch Command Refer e nce—Release 8.1 78-15474-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s set s nm p rm on me mo ry set snmp rmonme mory T o set t he memory usage limit in pe rcentage, use th e set snmp rmonmemory command.
2-569 Catalyst 6500 S eries Switch C o mmand Reference —Release 8.1 78-15474-01 Chapter 2 Catalyst 6500 Series Switch an d ROM Monitor Commands set snmp targ etadd r set snmp t argetadd r T o conf igure the SNMP tar get address en tries in the snm pT arg etAddres sT able, use the set snmp targetaddr co mmand .
2-570 Catalyst 6500 Series Switch Command Refer e nce—Release 8.1 78-15474-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s set snmp targetad dr Usage Guid el i nes If you u.
2-571 Catalyst 6500 S eries Switch C o mmand Reference —Release 8.1 78-15474-01 Chapter 2 Catalyst 6500 Series Switch an d ROM Monitor Commands set snmp targ etpara ms set snmp targ etparams T o con.
2-572 Catalyst 6500 Series Switch Command Refer e nce—Release 8.1 78-15474-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s set sn mp target para ms Usage Guid el i nes If y.
2-573 Catalyst 6500 S eries Switch C o mmand Reference —Release 8.1 78-15474-01 Chapter 2 Catalyst 6500 Series Switch an d ROM Monitor Commands set sn mp tra p set snmp trap T o enable or disable the diffe rent SNMP traps on the system or to add an entry into the SNMP authenti cation trap recei ver ta ble, use t h e set snmp trap command.
2-574 Catalyst 6500 Series Switch Command Refer e nce—Release 8.1 78-15474-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s set snmp trap Defaults The def a ult is SNM P traps are disabled. Comma nd T ypes Swit ch co mman d.
2-575 Catalyst 6500 S eries Switch C o mmand Reference —Release 8.1 78-15474-01 Chapter 2 Catalyst 6500 Series Switch an d ROM Monitor Commands set sn mp tra p Console> (enable) Relat e d Command.
2-576 Catalyst 6500 Series Switch Command Refer e nce—Release 8.1 78-15474-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s set snmp user set snmp user T o conf igure a new SNM P user , use the se t snmp user co mmand.
2-577 Catalyst 6500 S eries Switch C o mmand Reference —Release 8.1 78-15474-01 Chapter 2 Catalyst 6500 Series Switch an d ROM Monitor Commands set sn mp user This e xample shows how to se t a speci.
2-578 Catalyst 6500 Series Switch Command Refer e nce—Release 8.1 78-15474-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s set snmp view set snmp view T o conf igure the SNMP MIB v ie w , use th e set snmp view command .
2-579 Catalyst 6500 S eries Switch C o mmand Reference —Release 8.1 78-15474-01 Chapter 2 Catalyst 6500 Series Switch an d ROM Monitor Commands set sn mp view Exam ples Th is exampl e sh ows how to assign a su bt ree to the view pu blic: Console> (enable) set snmp view public 1.
2-580 Catalyst 6500 Series Switch Command Refer e nce—Release 8.1 78-15474-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s set span set span T o enable or disa ble SP AN and to set up the switch por t and VLAN analyzer for mu ltiple SP AN sessions, use the set span command.
2-581 Catalyst 6500 S eries Switch C o mmand Reference —Release 8.1 78-15474-01 Chapter 2 Catalyst 6500 Series Switch an d ROM Monitor Commands set sp an Usage Guid el i nes After y ou en ab le SP AN , syst em d efault s a re u sed i f no pa rame t ers w e re ever set.
2-582 Catalyst 6500 Series Switch Command Refer e nce—Release 8.1 78-15474-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s set span This example shows how to disable SP AN if mu ltiple SP AN sessio ns are not defined: Console> (enable) set span disable This command WILL disable your span session(s).
2-583 Catalyst 6500 S eries Switch C o mmand Reference —Release 8.1 78-15474-01 Chapter 2 Catalyst 6500 Series Switch an d ROM Monitor Commands set spantr ee backb onefast set spantree backbone fast T o en able or disa ble t he span ning t ree Back boneF ast C on ver gence f eature, use the se t spantr ee backbonefast comman d.
2-584 Catalyst 6500 Series Switch Command Refer e nce—Release 8.1 78-15474-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s set spantree bpdu-filter set spantree bpdu-filter T o enable or disable BPDU packet f iltering o n a port, use the set spantree bpdu- f ilter comman d.
2-585 Catalyst 6500 S eries Switch C o mmand Reference —Release 8.1 78-15474-01 Chapter 2 Catalyst 6500 Series Switch an d ROM Monitor Commands set spantr ee bpdu-g uard set spantree bpdu-guard T o ena ble or di sabl e spanning tree BPD U guar d on a po rt, us e the set spantree bpdu-guard comm and.
2-586 Catalyst 6500 Series Switch Command Refer e nce—Release 8.1 78-15474-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s set spa ntree bpdu- skewing set spantree bpdu-skewin g T o en able or disable collection of the s panni ng tre e BPDU s ke wing de tection statistics, use the set spantree bpdu-skew ing command.
2-587 Catalyst 6500 S eries Switch C o mmand Reference —Release 8.1 78-15474-01 Chapter 2 Catalyst 6500 Series Switch an d ROM Monitor Commands set spantr ee chann elcost set spantree channelco st T o set t he channel path cost an d to au tomatically adjust the c h annel p ort costs, u se the set spantree channelcost command .
2-588 Catalyst 6500 Series Switch Command Refer e nce—Release 8.1 78-15474-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s set s pan tre e cha nne lco st Relat e d Commands.
2-589 Catalyst 6500 S eries Switch C o mmand Reference —Release 8.1 78-15474-01 Chapter 2 Catalyst 6500 Series Switch an d ROM Monitor Commands set spa ntr ee chann elvlanco st set spantree channelv.
2-590 Catalyst 6500 Series Switch Command Refer e nce—Release 8.1 78-15474-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s set spantree defaultcostmode set spantree defaultcostmode T o s peci fy t he s p anni ng tre e de fau lt por t cost mode , use th e set spa n tree defau lt costm ode com ma nd .
2-591 Catalyst 6500 S eries Switch C o mmand Reference —Release 8.1 78-15474-01 Chapter 2 Catalyst 6500 Series Switch an d ROM Monitor Commands set spantr ee defau lt cos tmode Exam ples Th is examp.
2-592 Catalyst 6500 Series Switch Command Refer e nce—Release 8.1 78-15474-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s set spant ree disable set spantree disable T o disabl e the spanni ng tree algorithm for all VLANs or a specif ic VLAN or disable sp anning t ree inst an ce , us e th e set spa ntree disable command.
2-593 Catalyst 6500 S eries Switch C o mmand Reference —Release 8.1 78-15474-01 Chapter 2 Catalyst 6500 Series Switch an d ROM Monitor Commands set spa ntree disa ble This e xample sho ws ho w to disable spanning tree fo r a specif ic instance: Console> (enable) set spantree disable mistp-instance 2 MI-STP instance 2 disabled.
2-594 Catalyst 6500 Series Switch Command Refer e nce—Release 8.1 78-15474-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s set spantr ee enable set spantree enabl e T o enable the span ning tree algorithm for all VLANs, a spe cif ic VLAN, a specifi c instance, or al l inst an ce s, use th e set spantr ee enable command.
2-595 Catalyst 6500 S eries Switch C o mmand Reference —Release 8.1 78-15474-01 Chapter 2 Catalyst 6500 Series Switch an d ROM Monitor Commands set spantr ee enabl e Relat e d Commands set spantree .
2-596 Catalyst 6500 Series Switch Command Refer e nce—Release 8.1 78-15474-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s set spantree fwddelay set spantree fwddelay T o set the bridge forw ard delay for a VLAN or an instance, use the set spantree fwddelay command .
2-597 Catalyst 6500 S eries Switch C o mmand Reference —Release 8.1 78-15474-01 Chapter 2 Catalyst 6500 Series Switch an d ROM Monitor Commands set spantr ee fwddel ay This e xample shows ho w to se.
2-598 Catalyst 6500 Series Switch Command Refer e nce—Release 8.1 78-15474-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s set spantr ee global -default set spantree globa l-default T o s et th e gl ob al s ta tes on th e sw it ch, use th e set spa ntree globa l-def ault command.
2-599 Catalyst 6500 S eries Switch C o mmand Reference —Release 8.1 78-15474-01 Chapter 2 Catalyst 6500 Series Switch an d ROM Monitor Commands set spantr ee globa l-d efault This exampl e shows ho .
2-600 Catalyst 6500 Series Switch Command Refer e nce—Release 8.1 78-15474-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s set spantree guard set spantree guard T o enabl e or disab le the spa nning tr ee roo t guard or loop gua rd feat ure on a per-port basis, use t he set spantree guar d command.
2-601 Catalyst 6500 S eries Switch C o mmand Reference —Release 8.1 78-15474-01 Chapter 2 Catalyst 6500 Series Switch an d ROM Monitor Commands set spantr ee guard Exam ples Th is exampl e sh ows how to ena ble root gua rd : Console> (enable) set spantree guard root 5/1 Rootguard on port 5/1 is enabled.
2-602 Catalyst 6500 Series Switch Command Refer e nce—Release 8.1 78-15474-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s set spantree hello set spantree hello T o set the bridge hello time for a VLAN or an instance, use the set spantree hello command.
2-603 Catalyst 6500 S eries Switch C o mmand Reference —Release 8.1 78-15474-01 Chapter 2 Catalyst 6500 Series Switch an d ROM Monitor Commands set s pan tr ee h e llo This example sho ws how to set.
2-604 Catalyst 6500 Series Switch Command Refer e nce—Release 8.1 78-15474-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s set spantree link-type set spantree link-type T o conf ig ure the link type of a port , use the set spantr ee link-type command .
2-605 Catalyst 6500 S eries Switch C o mmand Reference —Release 8.1 78-15474-01 Chapter 2 Catalyst 6500 Series Switch an d ROM Monitor Commands set spantr ee macred uction set spantree macreduction T o enable or disable the span ning tre e MA C address re duction fe ature, use the set spantree macr eduction comman d.
2-606 Catalyst 6500 Series Switch Command Refer e nce—Release 8.1 78-15474-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s set spantree maxa ge set spantree maxage T o set the bridge max imum aging time for a VLAN or an instance , u se the set spantree maxage comm and.
2-607 Catalyst 6500 S eries Switch C o mmand Reference —Release 8.1 78-15474-01 Chapter 2 Catalyst 6500 Series Switch an d ROM Monitor Commands set spantr ee maxage This exampl e shows ho w to set t.
2-608 Catalyst 6500 Series Switch Command Refer e nce—Release 8.1 78-15474-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s set s pantree mode set spantree mode T o configure the type of Span ning T ree Pro tocol mo de to run, use the set spantree mode command.
2-609 Catalyst 6500 S eries Switch C o mmand Reference —Release 8.1 78-15474-01 Chapter 2 Catalyst 6500 Series Switch an d ROM Monitor Commands set sp antree m ode If yo u ch a n g e the sp ann ing .
2-610 Catalyst 6500 Series Switch Command Refer e nce—Release 8.1 78-15474-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s set spantree m st set spantree mst T o conf ig ure the mapping of VLANs to an MST instance , use the set spantree mst command.
2-611 Catalyst 6500 S eries Switch C o mmand Reference —Release 8.1 78-15474-01 Chapter 2 Catalyst 6500 Series Switch an d ROM Monitor Commands set spantr ee mst co nfi g set spantree mst config T o change the MST regio n informatio n, use the set spantree mst conf ig comman d.
2-612 Catalyst 6500 Series Switch Command Refer e nce—Release 8.1 78-15474-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s set spantree mst config Exam ples Th is example s.
2-613 Catalyst 6500 S eries Switch C o mmand Reference —Release 8.1 78-15474-01 Chapter 2 Catalyst 6500 Series Switch an d ROM Monitor Commands set s pan tr ee m st li n k -ty pe set spantree mst link-type T o conf ig ure the link type of a port , use the set spantree mst link-type co mmand .
2-614 Catalyst 6500 Series Switch Command Refer e nce—Release 8.1 78-15474-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s set spantree mst m axhops set spantree mst maxhops T o s et th e spa nni ng tr ee h op co unt , us e t he set spantree mst ma xhops co mman d.
2-615 Catalyst 6500 S eries Switch C o mmand Reference —Release 8.1 78-15474-01 Chapter 2 Catalyst 6500 Series Switch an d ROM Monitor Commands set s pan tr ee m st v lan set spantree mst vlan T o conf ig ure the mapping of VLANs to an MST instance , use the set spantree mst v lan command .
2-616 Catalyst 6500 Series Switch Command Refer e nce—Release 8.1 78-15474-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s set sp ant ree po rt cost set spant ree port cost T o set the path cost for a por t, use the set span tree port cos t comma nd.
2-617 Catalyst 6500 S eries Switch C o mmand Reference —Release 8.1 78-15474-01 Chapter 2 Catalyst 6500 Series Switch an d ROM Monitor Commands set sp antree p ortco st Comma nd T ypes Swit ch co mman d.
2-618 Catalyst 6500 Series Switch Command Refer e nce—Release 8.1 78-15474-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s set spantree portfast set spantree port fast T o allo w a p ort that is connected to a single wo rkstation or PC to start faster when it is connected, use the set spantree portfast command.
2-619 Catalyst 6500 S eries Switch C o mmand Reference —Release 8.1 78-15474-01 Chapter 2 Catalyst 6500 Series Switch an d ROM Monitor Commands set spantr ee portfas t bpdu-fi lt er set spantree por.
2-620 Catalyst 6500 Series Switch Command Refer e nce—Release 8.1 78-15474-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s set span tree portfa st bpdu-guard set spantree portfast bp du-guard T o ena ble o r di sab le spanni ng tree Po rtFast BPDU guard o n a por t, u se the se t spantree port fast bpdu-guard comman d.
2-621 Catalyst 6500 S eries Switch C o mmand Reference —Release 8.1 78-15474-01 Chapter 2 Catalyst 6500 Series Switch an d ROM Monitor Commands set spantr ee portins tancecos t set spantree port instanceco st T o assign the pa th cost of the port for the specif ied instan ces, use the set spantree portinstancecost comm and.
2-622 Catalyst 6500 Series Switch Command Refer e nce—Release 8.1 78-15474-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s set span tree porti nstancecost Exam ples Th ese .
2-623 Catalyst 6500 S eries Switch C o mmand Reference —Release 8.1 78-15474-01 Chapter 2 Catalyst 6500 Series Switch an d ROM Monitor Commands set spantr ee portins tancepri set spantree portinstan cepri T o set the p ort prior ity for inst ances in th e trunk p ort, use th e set spantree portinstancepri comman d.
2-624 Catalyst 6500 Series Switch Command Refer e nce—Release 8.1 78-15474-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s set spantree portinstancepri This exampl e shows .
2-625 Catalyst 6500 S eries Switch C o mmand Reference —Release 8.1 78-15474-01 Chapter 2 Catalyst 6500 Series Switch an d ROM Monitor Commands set spantr ee portp ri set spant ree port pri T o s et the brid ge pr iori ty for a s pa nning t ree po rt, use t h e set spantree portpri command .
2-626 Catalyst 6500 Series Switch Command Refer e nce—Release 8.1 78-15474-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s set sp ant re e po rtv l an cos t set spantree port vlancost T o assign a lower path cost to a set of VLANs on a port , use the set spantree port vlancost command .
2-627 Catalyst 6500 S eries Switch C o mmand Reference —Release 8.1 78-15474-01 Chapter 2 Catalyst 6500 Series Switch an d ROM Monitor Commands set spa ntr ee portv la ncost Command Mode s Pri vile ged.
2-628 Catalyst 6500 Series Switch Command Refer e nce—Release 8.1 78-15474-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s set sp ant re e po rtv l an cos t Relat e d Comma.
2-629 Catalyst 6500 S eries Switch C o mmand Reference —Release 8.1 78-15474-01 Chapter 2 Catalyst 6500 Series Switch an d ROM Monitor Commands set spantr ee portvla npri set spantree portvlanpri T o set the p ort prior ity for a su bset of VLANs in the tru nk port , use the set spantree po rtvlan pri comm and.
2-630 Catalyst 6500 Series Switch Command Refer e nce—Release 8.1 78-15474-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s set spantree p ortvlanpri Relat e d Commands clea.
Chapter 2 Ca talyst 6 500 Series Swi tch and ROM M onitor Comm ands set s pantree priority 2-631 Catalyst 6500 Series Switch Command Refer e nce—Release 8.1 78-15474-01 22 set spantree priority T o set th e bridge priority for a VLAN or an inst ance whe n PVST+ or MI STP is runnin g, use the set spantree priority command.
2-632 Catalyst 6500 Series Switch Command Refer e nce—Release 8.1 78-15474-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s set spantree priority This exam ple sh ows how to.
2-633 Catalyst 6500 S eries Switch C o mmand Reference —Release 8.1 78-15474-01 Chapter 2 Catalyst 6500 Series Switch an d ROM Monitor Commands set sp antree r oot set spantree root T o set the primary o r secondar y root fo r specifi c VLANs, all VLANs of the switc h, or a n instance, u se the set spantree root command.
2-634 Catalyst 6500 Series Switch Command Refer e nce—Release 8.1 78-15474-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s set spantree root The set spa ntree root brid ge priorit y value is 16384, except when M A C re ducti on or MISTP are enabled, the n the valu e is 24576.
2-635 Catalyst 6500 S eries Switch C o mmand Reference —Release 8.1 78-15474-01 Chapter 2 Catalyst 6500 Series Switch an d ROM Monitor Commands set sp antree r oot These ex amples sho w that setting the b ridge priority to 819 2 was not suf ficient to make this switch the root.
2-636 Catalyst 6500 Series Switch Command Refer e nce—Release 8.1 78-15474-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s set spantree uplinkfast set spantree uplinkfast T o enab le fast switcho ver to alter nate ports when the root p ort f a ils, use the set spantree uplinkfast command.
2-637 Catalyst 6500 S eries Switch C o mmand Reference —Release 8.1 78-15474-01 Chapter 2 Catalyst 6500 Series Switch an d ROM Monitor Commands set spantr ee uplinkf ast Y ou do no t have to turn on the all-pr otoc ols fe atu re on Catal yst 6500 ser ies sw itch es t hat h ave both the UplinkFas t a nd pro t oco l filtering f eat ur es en ab led.
2-638 Catalyst 6500 Series Switch Command Refer e nce—Release 8.1 78-15474-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s set summertime set summertime T o spec ify whet her the sys tem s hould set t he clo ck ahea d o ne hou r during daylig ht saving time , use the set summertime command.
2-639 Catalyst 6500 S eries Switch C o mmand Reference —Release 8.1 78-15474-01 Chapter 2 Catalyst 6500 Series Switch an d ROM Monitor Commands set su mmertim e Exam ples Th is exampl e shows how to.
2-640 Catalyst 6500 Series Switch Command Refer e nce—Release 8.1 78-15474-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s set system baud set system baud T o set th e consol e port ba ud rate, u se the set syst em baud comman d.
2-641 Catalyst 6500 S eries Switch C o mmand Reference —Release 8.1 78-15474-01 Chapter 2 Catalyst 6500 Series Switch an d ROM Monitor Commands set system con tact set system contact T o i d en tif y a co ntac t p ers on for t h e sys te m, use th e set sy stem cont act co mmand .
2-642 Catalyst 6500 Series Switch Command Refer e nce—Release 8.1 78-15474-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s set system core- dump set system core-dump T o enable or disable the core dump feature, use the set system core-dump comman d.
2-643 Catalyst 6500 S eries Switch C o mmand Reference —Release 8.1 78-15474-01 Chapter 2 Catalyst 6500 Series Switch an d ROM Monitor Commands set system cor e-file set system core-file To specify the cor e image filename, use t h e set s ys te m core- file comm and.
2-644 Catalyst 6500 Series Switch Command Refer e nce—Release 8.1 78-15474-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s set system countryco d e set system countryco de T o s peci fy t he c ou ntry w here the syste m is physi ca lly loc ate d, us e the se t system countrycode comm and.
2-645 Catalyst 6500 S eries Switch C o mmand Reference —Release 8.1 78-15474-01 Chapter 2 Catalyst 6500 Series Switch an d ROM Monitor Commands set system cro ssbar -fa llback set system crossbar-fal lback T o selec t the ac tion tak en when th e Switch Fa bric Mod ule fails, use th e set system crossbar -fallback comm and.
2-646 Catalyst 6500 Series Switch Command Refer e nce—Release 8.1 78-15474-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s set system highava ilability set system highavailability T o enable or disable h igh system a vai lability for the switch, use the set system higha vailability comm an d.
2-647 Catalyst 6500 S eries Switch C o mmand Reference —Release 8.1 78-15474-01 Chapter 2 Catalyst 6500 Series Switch an d ROM Monitor Commands set syst em higha vailabi lity ve rsi oning set system.
2-648 Catalyst 6500 Series Switch Command Refer e nce—Release 8.1 78-15474-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s set system highavailability versioning Exam ples .
2-649 Catalyst 6500 S eries Switch C o mmand Reference —Release 8.1 78-15474-01 Chapter 2 Catalyst 6500 Series Switch an d ROM Monitor Commands set sy stem info -log set system info-log T o log the output of speci fied show com mands to a server for tro ubleshoo ting and de bugging, use t he set system inf o-log comma nd.
2-650 Catalyst 6500 Series Switch Command Refer e nce—Release 8.1 78-15474-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s set system info-log Usage Guid el i nes When you .
2-651 Catalyst 6500 S eries Switch C o mmand Reference —Release 8.1 78-15474-01 Chapter 2 Catalyst 6500 Series Switch an d ROM Monitor Commands set sy stem locati on set system location T o identify the location of the system, use the set sy stem l oca tion command.
2-652 Catalyst 6500 Series Switch Command Refer e nce—Release 8.1 78-15474-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s se t sy stem mo de m set system modem T o enable or disable mo dem cont rol lines on the cons ole port , use the set system modem comman d.
2-653 Catalyst 6500 S eries Switch C o mmand Reference —Release 8.1 78-15474-01 Chapter 2 Catalyst 6500 Series Switch an d ROM Monitor Commands set sy stem name set system name T o conf igure a name fo r the syst em, use the set system name comman d.
2-654 Catalyst 6500 Series Switch Command Refer e nce—Release 8.1 78-15474-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s set system super visor-upd ate set system supervisor-update T o con figure t he Er asa ble Progr am mabl e L ogic Device (E PLD) upg rade p roce ss, use the set sy stem supervisor -update comma nd.
2-655 Catalyst 6500 S eries Switch C o mmand Reference —Release 8.1 78-15474-01 Chapter 2 Catalyst 6500 Series Switch an d ROM Monitor Commands set syst em su per viso r-updat e This exam ple sh ows how to disab le EPL D up gra des : Console> (enable) set system supervisor-update disable Supervisor EPLD update during reset is disabled.
2-656 Catalyst 6500 Series Switch Command Refer e nce—Release 8.1 78-15474-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s set system switchmode allow set system switchmode allow T o conf igure the switch ing mode for the syst em, use th e set syst em switchmode allow command.
2-657 Catalyst 6500 S eries Switch C o mmand Reference —Release 8.1 78-15474-01 Chapter 2 Catalyst 6500 Series Switch an d ROM Monitor Commands set sy stem switch mode a llow This example sho ws how to set the switching mode to bu s-only: Console> (enable) set system switchmode allow bus-only System switchmode allow set to bus-only.
2-658 Catalyst 6500 Series Switch Command Refer e nce—Release 8.1 78-15474-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s set system syslog-dump set system syslog-dump T o write system messag es in the syslog bu ffer to a flash file before the system fail s , use the set system syslog-dump co mmand.
2-659 Catalyst 6500 S eries Switch C o mmand Reference —Release 8.1 78-15474-01 Chapter 2 Catalyst 6500 Series Switch an d ROM Monitor Commands set sy stem syslog- file set system syslog-file T o specify the f lash devi ce and f ile name for the sy slog dump when the system fa ils, use the set system syslog-file comm and.
2-660 Catalyst 6500 Series Switch Command Refer e nce—Release 8.1 78-15474-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s set tacacs attempts set tacacs attempts T o configure t he m aximum number of login a ttempt s allowed to the T A CA CS+ server, use the set taca cs attemp ts com mand .
2-661 Catalyst 6500 S eries Switch C o mmand Reference —Release 8.1 78-15474-01 Chapter 2 Catalyst 6500 Series Switch an d ROM Monitor Commands set taca cs directedre quest set tacacs directed request T o en able or disa ble the T A CA CS+ di rected-requ est o ption, use the se t tacacs directedr e quest comman d.
2-662 Catalyst 6500 Series Switch Command Refer e nce—Release 8.1 78-15474-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s set tacacs key set tacacs key T o set the ke y for T A CA CS+ authentication and enc ryption, use the set taca cs ke y comma nd.
2-663 Catalyst 6500 S eries Switch C o mmand Reference —Release 8.1 78-15474-01 Chapter 2 Catalyst 6500 Series Switch an d ROM Monitor Commands set tacacs server set tacacs serv er T o de fin e a T AC A CS+ serv er, use the set ta ca cs se rver co mman d.
2-664 Catalyst 6500 Series Switch Command Refer e nce—Release 8.1 78-15474-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s set tac acs timeout set tacacs time out T o set t he response tim eout interv al for t he T A CA CS+ server d aemon, use th e set tacacs tim eout command.
2-665 Catalyst 6500 S eries Switch C o mmand Reference —Release 8.1 78-15474-01 Chapter 2 Catalyst 6500 Series Switch an d ROM Monitor Commands set test diagf ail-act ion set test diagfail-action T o set t he action th at the supervisor en gine tak es when a diagnostics test fails, use the se t tes t diagfail-ac tion command.
2-666 Catalyst 6500 Series Switch Command Refer e nce—Release 8.1 78-15474-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s set test d iaglevel set test diaglevel T o s et th e di a gnos tic l evel, use t he set te st diaglevel comm and.
2-667 Catalyst 6500 S eries Switch C o mmand Reference —Release 8.1 78-15474-01 Chapter 2 Catalyst 6500 Series Switch an d ROM Monitor Commands set ti me set time T o change the time of day on the system clo ck, use the set time comman d.
2-668 Catalyst 6500 Series Switch Command Refer e nce—Release 8.1 78-15474-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s se t tim ez on e set timezone T o set the time zone for the system, use the set timezo ne com mand.
2-669 Catalyst 6500 S eries Switch C o mmand Reference —Release 8.1 78-15474-01 Chapter 2 Catalyst 6500 Series Switch an d ROM Monitor Commands set traffic m on itor set traffic monitor T o conf igure the thr eshold at which a hi gh-traf fic log will be generated, use the set traf fic monitor comm and.
2-670 Catalyst 6500 Series Switch Command Refer e nce—Release 8.1 78-15474-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s set trunk set trunk T o conf ig ure trunk ports and to add VLANs to the all owed VLAN list for exis ting trunks, use the set trunk comm and.
2-671 Catalyst 6500 S eries Switch C o mmand Reference —Release 8.1 78-15474-01 Chapter 2 Catalyst 6500 Series Switch an d ROM Monitor Commands set trunk Usage Guid el i nes This c omm and is not sup port ed by t he NAM.
2-672 Catalyst 6500 Series Switch Command Refer e nce—Release 8.1 78-15474-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s set trunk This e xample shows ho w to set the t runk mode to nonegotiate , the trunk t ype to 802.1Q, and t he 802.
Chapter 2 Ca talyst 6 500 Series Swi tch and ROM M onitor Comm ands set udl d 2-673 Catalyst 6500 Series Switch Command Refer e nce—Release 8.1 78-15474-01 22 set udld T o enab le or dis able the UDLD info rmation di spla y on specif ied port s or glo bally on al l por ts, us e the set udld command.
2-674 Catalyst 6500 Series Switch Command Refer e nce—Release 8.1 78-15474-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s set udld This exam ple sh ows how to disab l e the UD LD m es sag e displ ay f or po rt 1 o n m odu le 2: Console> (enable) set udld disable 2/1 UDLD disabled on port 2/1.
2-675 Catalyst 6500 S eries Switch C o mmand Reference —Release 8.1 78-15474-01 Chapter 2 Catalyst 6500 Series Switch an d ROM Monitor Commands set udld aggres si ve-mod e set udld aggressive-mo de T o enable or disable the UDLD aggressi ve mod e on specif ied ports, us e the set udld aggressiv e -mode comm and.
2-676 Catalyst 6500 Series Switch Command Refer e nce—Release 8.1 78-15474-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s set udld interval set udld interval T o set t he UDLD message inte rva l timer , use the set udld interval command .
2-677 Catalyst 6500 S eries Switch C o mmand Reference —Release 8.1 78-15474-01 Chapter 2 Catalyst 6500 Series Switch an d ROM Monitor Commands set vl an set vlan T o group p orts int o a VLAN, set the private VLAN type , map or un map VLA Ns to or f rom an instance , specify a n 8 02.
2-678 Catalyst 6500 Series Switch Command Refer e nce—Release 8.1 78-15474-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s set v lan Defaults The de fault values ar e as follows: • Switche d Ethern et ports and Ether net repe ater por ts are in VLA N 1.
2-679 Catalyst 6500 S eries Switch C o mmand Reference —Release 8.1 78-15474-01 Chapter 2 Catalyst 6500 Series Switch an d ROM Monitor Commands set vl an If you spe cify a r an ge of V LA Ns, y ou cann ot u se the VLAN name . If you ente r the mistp-instance none co m m a nd , the specified VLANs are unmapped from any instance they are mapped to.
2-680 Catalyst 6500 Series Switch Command Refer e nce—Release 8.1 78-15474-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s set v lan T o secure a range of VLANs on a Fire wall Services Mod ule, these conditions must be satisfied : 1.
2-681 Catalyst 6500 S eries Switch C o mmand Reference —Release 8.1 78-15474-01 Chapter 2 Catalyst 6500 Series Switch an d ROM Monitor Commands set vl an Relat e d Commands clear co nfi g pvlan clea.
2-682 Catalyst 6500 Series Switch Command Refer e nce—Release 8.1 78-15474-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s set vlan mapping set vlan mapping T o map r eserved VLANs to n onreserved VL ANs or map 8 02.1Q V LANs to ISL VLANs, use the set vlan mapping comm and.
2-683 Catalyst 6500 S eries Switch C o mmand Reference —Release 8.1 78-15474-01 Chapter 2 Catalyst 6500 Series Switch an d ROM Monitor Commands set vl an mappi ng If the table is full, the command is aborted wit h an error message indica ting the table is full.
2-684 Catalyst 6500 Series Switch Command Refer e nce—Release 8.1 78-15474-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s set vlan verify-port-provisioning set vlan verify.
2-685 Catalyst 6500 S eries Switch C o mmand Reference —Release 8.1 78-15474-01 Chapter 2 Catalyst 6500 Series Switch an d ROM Monitor Commands set vmps dow nloa dm et hod set vmps down loadmeth od T o spec ify whether to use TF TP or rcp t o do wnl oad the V MPS dat abase, use the set vmps downloadmethod comman d.
2-686 Catalyst 6500 Series Switch Command Refer e nce—Release 8.1 78-15474-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s set vmps downl oadserver set vmps downloadserver T o spec ify the IP ad dress of t he TFTP o r rcp server from which the VMPS data base is download ed, use the set vmps downloadserver com mand.
2-687 Catalyst 6500 S eries Switch C o mmand Reference —Release 8.1 78-15474-01 Chapter 2 Catalyst 6500 Series Switch an d ROM Monitor Commands set vm ps ser ver set vmps server T o conf ig ure the VMPS, use the set vmps server command .
2-688 Catalyst 6500 Series Switch Command Refer e nce—Release 8.1 78-15474-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s set vmps server Relat e d Commands clear vmps ser.
2-689 Catalyst 6500 S eries Switch C o mmand Reference —Release 8.1 78-15474-01 Chapter 2 Catalyst 6500 Series Switch an d ROM Monitor Commands set vmps state set vmps state T o enable or disable VMPS, use the set vmps state co mman d. set vmps st ate { enable | disable } Syntax D escr i pti on Defaults By defau lt, VMPS is di sabled.
2-690 Catalyst 6500 Series Switch Command Refer e nce—Release 8.1 78-15474-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s set vtp set vtp T o set t he options for VTP , use the se t vtp command.
2-691 Catalyst 6500 S eries Switch C o mmand Reference —Release 8.1 78-15474-01 Chapter 2 Catalyst 6500 Series Switch an d ROM Monitor Commands set vt p Comma nd T ypes Swit ch co mman d.
2-692 Catalyst 6500 Series Switch Command Refer e nce—Release 8.1 78-15474-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s set vtp The fo llowing guideline s apply onl y to VTP version 3: • VTP version 3 works concurre ntly with VTP versisons 1 an d 2.
2-693 Catalyst 6500 S eries Switch C o mmand Reference —Release 8.1 78-15474-01 Chapter 2 Catalyst 6500 Series Switch an d ROM Monitor Commands set vt p Relat e d Commands clea r vlan clear vtp prun.
2-694 Catalyst 6500 Series Switch Command Refer e nce—Release 8.1 78-15474-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s set vtp pruneeligible set vtp pruneeligib le T o specify which VTP dom ain VLANs are pruning elig ible, use the set vtp pruneeligible com mand.
Chapter 2 Ca talyst 6 500 Series Swi tch and ROM M onitor Comm ands show accou nting 2-695 Catalyst 6500 Series Switch Command Refer e nce—Release 8.1 78-15474-01 22 show accou nting T o di splay ac counti ng setup and c onfigurat ion infor mati on on t he sw itch , us e the show ac counti ng comm and.
2-696 Catalyst 6500 Series Switch Command Refer e nce—Release 8.1 78-15474-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s show acc oun ting Overall Accounting Traffic: Sta.
2-697 Catalyst 6500 S eries Switch C o mmand Reference —Release 8.1 78-15474-01 Chapter 2 Catalyst 6500 Series Switch an d ROM Monitor Commands show ac coun ting Relat e d Commands set accounting co.
2-698 Catalyst 6500 Series Switch Command Refer e nce—Release 8.1 78-15474-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s show acl log show acllog T o display the status of A CL log ra te limitin g, use the show acllog command .
2-699 Catalyst 6500 S eries Switch C o mmand Reference —Release 8.1 78-15474-01 Chapter 2 Catalyst 6500 Series Switch an d ROM Monitor Commands show ac lmer ge algo show aclme rge algo T o display informat io n about the A CL merge algor ithm, use the sho w aclm er ge com mand.
2-700 Catalyst 6500 Series Switch Command Refer e nce—Release 8.1 78-15474-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s show ali as show alias T o di splay a li sti ng of de fined com mand alia ses, use the show alias command .
2-701 Catalyst 6500 S eries Switch C o mmand Reference —Release 8.1 78-15474-01 Chapter 2 Catalyst 6500 Series Switch an d ROM Monitor Commands show arp show arp T o dis pla y the ARP t able , use the show arp comman d. show arp [ ip_addr | hostnam e ] [ noalias ] Syntax D escr i pti on Defaults Thi s command has no de fault setti ngs.
2-702 Catalyst 6500 Series Switch Command Refer e nce—Release 8.1 78-15474-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s show auth entication show authen tication T o display authentica tion information, use the show authen ticatio n comman d.
2-703 Catalyst 6500 S eries Switch C o mmand Reference —Release 8.1 78-15474-01 Chapter 2 Catalyst 6500 Series Switch an d ROM Monitor Commands show au tho rization show authorizatio n T o display auth orization setup a nd config uration inform ation on the swit ch, use the sho w author ization comm and.
2-704 Catalyst 6500 Series Switch Command Refer e nce—Release 8.1 78-15474-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s show bann er show banne r T o v iew the messa ge .
2-705 Catalyst 6500 S eries Switch C o mmand Reference —Release 8.1 78-15474-01 Chapter 2 Catalyst 6500 Series Switch an d ROM Monitor Commands show bo ot show boot T o displa y the content s of the BOOT envi ronment v ariables and the conf iguration regi ster setting, use the show boot command.
2-706 Catalyst 6500 Series Switch Command Refer e nce—Release 8.1 78-15474-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s show boo t device show boot de vice T o display the NAM boot stri ng stored in NVRA M, use the show boot device comm and.
2-707 Catalyst 6500 S eries Switch C o mmand Reference —Release 8.1 78-15474-01 Chapter 2 Catalyst 6500 Series Switch an d ROM Monitor Commands show ca m show cam T o display CAM table entr ies, use the show c am command.
2-708 Catalyst 6500 Series Switch Command Refer e nce—Release 8.1 78-15474-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s sho w ca m Exam ples Th is exampl e sh ows how to displa y d ynami c C AM en tri es for a ll V LAN s: Console> show cam dynamic * = Static Entry.
2-709 Catalyst 6500 S eries Switch C o mmand Reference —Release 8.1 78-15474-01 Chapter 2 Catalyst 6500 Series Switch an d ROM Monitor Commands show ca m Relat e d Commands clear ca m set cam show c.
2-710 Catalyst 6500 Series Switch Command Refer e nce—Release 8.1 78-15474-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s show cam agi ngtime show cam ag ingti me T o display CAM aging time info rmation for all conf igured VLANs, use the show cam agingtim e comm and.
2-711 Catalyst 6500 S eries Switch C o mmand Reference —Release 8.1 78-15474-01 Chapter 2 Catalyst 6500 Series Switch an d ROM Monitor Commands show ca m coun t show cam co unt T o display the number of CAM entries only , u se the show cam count command .
2-712 Catalyst 6500 Series Switch Command Refer e nce—Release 8.1 78-15474-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s show cam ms fc show cam msfc T o display the router ’ s MA C-VLAN entries, use the sho w cam msfc comm and.
2-713 Catalyst 6500 S eries Switch C o mmand Reference —Release 8.1 78-15474-01 Chapter 2 Catalyst 6500 Series Switch an d ROM Monitor Commands show ca m not ification show cam notification T o display the status of CAM table notificat ions, notification intervals, and MAC addresses added a nd deleted, use the show ca m noti fication co mman d.
2-714 Catalyst 6500 Series Switch Command Refer e nce—Release 8.1 78-15474-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s show cam notification This exam ple shows how to .
2-715 Catalyst 6500 S eries Switch C o mmand Reference —Release 8.1 78-15474-01 Chapter 2 Catalyst 6500 Series Switch an d ROM Monitor Commands show ca m not ification Relat e d Commands clear ca m .
2-716 Catalyst 6500 Series Switch Command Refer e nce—Release 8.1 78-15474-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s show cd p show cdp T o di splay Cisc o D iscovery Pr otocol (C DP) in forma tion, use th e show cdp comm and.
2-717 Catalyst 6500 S eries Switch C o mmand Reference —Release 8.1 78-15474-01 Chapter 2 Catalyst 6500 Series Switch an d ROM Monitor Commands show cd p This example shows how to display detai led CDP neighbor informa tion. Th e display varies dependi ng on yo ur ne twork c onfigurati on at the ti me you r un the c omman d.
2-718 Catalyst 6500 Series Switch Command Refer e nce—Release 8.1 78-15474-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s show cd p Port Device-ID Port-ID NativeVLAN -----.
2-719 Catalyst 6500 S eries Switch C o mmand Reference —Release 8.1 78-15474-01 Chapter 2 Catalyst 6500 Series Switch an d ROM Monitor Commands show ch anne l show chann el T o d ispl ay E t herCh ann el i nfo rmat ion fo r a ch an nel , u s e t he show channel comman d.
2-720 Catalyst 6500 Series Switch Command Refer e nce—Release 8.1 78-15474-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s show chan nel This exam ple shows how to di splay.
2-721 Catalyst 6500 S eries Switch C o mmand Reference —Release 8.1 78-15474-01 Chapter 2 Catalyst 6500 Series Switch an d ROM Monitor Commands show ch anne l Chan Port if- Oper-group Neighbor Chan .
2-722 Catalyst 6500 Series Switch Command Refer e nce—Release 8.1 78-15474-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s show chan nel 768 469263 48083 Channel Dely-Exced.
2-723 Catalyst 6500 S eries Switch C o mmand Reference —Release 8.1 78-15474-01 Chapter 2 Catalyst 6500 Series Switch an d ROM Monitor Commands show ch anne l ---- ----- -------- -------- -------- 7.
2-724 Catalyst 6500 Series Switch Command Refer e nce—Release 8.1 78-15474-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s show chan nel gro up show chann el group T o disp lay Ether Chan n el grou p status info rmat ion, use the show channel group comm and.
2-725 Catalyst 6500 S eries Switch C o mmand Reference —Release 8.1 78-15474-01 Chapter 2 Catalyst 6500 Series Switch an d ROM Monitor Commands show ch anne l group Admin Port Device-ID Port-ID Plat.
2-726 Catalyst 6500 Series Switch Command Refer e nce—Release 8.1 78-15474-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s show chan nel gro up Admin Port Qos-Tx Qos-Rx Qos.
2-727 Catalyst 6500 S eries Switch C o mmand Reference —Release 8.1 78-15474-01 Chapter 2 Catalyst 6500 Series Switch an d ROM Monitor Commands show ch anne l group Console> show channel group 15.
2-728 Catalyst 6500 Series Switch Command Refer e nce—Release 8.1 78-15474-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s show channel hash show chann el has h T o display the channe l port the traff ic goes to based on the curren t channel distrib ution mode, use the show channel ha sh command .
2-729 Catalyst 6500 S eries Switch C o mmand Reference —Release 8.1 78-15474-01 Chapter 2 Catalyst 6500 Series Switch an d ROM Monitor Commands show ch annel ha sh Exam ples This example sho ws how to display hash informat ion in a channel: Console> show channel hash 769 10.
2-730 Catalyst 6500 Series Switch Command Refer e nce—Release 8.1 78-15474-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s show channel mac show chann el mac T o display MA C information in the channel, use the sho w channel mac comm and.
2-731 Catalyst 6500 S eries Switch C o mmand Reference —Release 8.1 78-15474-01 Chapter 2 Catalyst 6500 Series Switch an d ROM Monitor Commands show ch anne lprot oco l show chann elprotocol T o d i s pl a y the channeling pro tocol used by each module in the s ystem, us e t h e show channelpr otocol comm and.
2-732 Catalyst 6500 Series Switch Command Refer e nce—Release 8.1 78-15474-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s show channel traffic show chann el traffic T o display c hannel p ort utilization based on MAC counters, use the show channel traffic command.
2-733 Catalyst 6500 S eries Switch C o mmand Reference —Release 8.1 78-15474-01 Chapter 2 Catalyst 6500 Series Switch an d ROM Monitor Commands show co nfi g show config T o d isplay the nond efaul t sys tem or m odule con figura tion, u se the show config command.
2-734 Catalyst 6500 Series Switch Command Refer e nce—Release 8.1 78-15474-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s show conf ig ! #frame distribution method set port channel all distribution mac unknown ! #snmp set snmp trap 0.
2-735 Catalyst 6500 S eries Switch C o mmand Reference —Release 8.1 78-15474-01 Chapter 2 Catalyst 6500 Series Switch an d ROM Monitor Commands show co nfi g #rcp set rcp username 1 ! #dns set ip dns server 171.68.10.70 primary set ip dns server 171.
2-736 Catalyst 6500 Series Switch Command Refer e nce—Release 8.1 78-15474-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s show conf ig #module 4 empty ! #module 5 : 48-por.
2-737 Catalyst 6500 S eries Switch C o mmand Reference —Release 8.1 78-15474-01 Chapter 2 Catalyst 6500 Series Switch an d ROM Monitor Commands show co nfi g #system set system baud 9600 set system modem disable set system name set system location set system contact ! .
2-738 Catalyst 6500 Series Switch Command Refer e nce—Release 8.1 78-15474-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s show conf ig This e xample sho ws how to display the A CL conf iguration f ile location: Console> (enable) show config acl location ACL configuration is being saved in NVRAM.
2-739 Catalyst 6500 S eries Switch C o mmand Reference —Release 8.1 78-15474-01 Chapter 2 Catalyst 6500 Series Switch an d ROM Monitor Commands show co nfi g m od e show config mode T o disp lay the syst em conf igur ation mode cur rently run ning on the switch , use the show conf ig mode comm and.
2-740 Catalyst 6500 Series Switch Command Refer e nce—Release 8.1 78-15474-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s show co n fig q os a cl show config qos acl T o display the co mmitted ac cess lists in a c ommand l ine form at, use th e show conf ig qos acl comm and.
2-741 Catalyst 6500 S eries Switch C o mmand Reference —Release 8.1 78-15474-01 Chapter 2 Catalyst 6500 Series Switch an d ROM Monitor Commands show co ps show cops T o display COPS information, use the show cops comm and.
2-742 Catalyst 6500 Series Switch Command Refer e nce—Release 8.1 78-15474-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s show co p s COPS connection state : connected Last active server : 171.21.34.56 Primary configured server : 171.
2-743 Catalyst 6500 S eries Switch C o mmand Reference —Release 8.1 78-15474-01 Chapter 2 Catalyst 6500 Series Switch an d ROM Monitor Commands show co ps COPS RSVP client state --------------------.
2-744 Catalyst 6500 Series Switch Command Refer e nce—Release 8.1 78-15474-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s show count ers show counte rs T o d isplay h ardwa re c oun ter s fo r a por t, al l p orts on a m odul e, or a su pe rviso r e ngin e, u se t he show counters com mand.
2-745 Catalyst 6500 S eries Switch C o mmand Reference —Release 8.1 78-15474-01 Chapter 2 Catalyst 6500 Series Switch an d ROM Monitor Commands show co unt ers 15 rxTxHCpkts1024to1518Octets = 0 16 r.
2-746 Catalyst 6500 Series Switch Command Refer e nce—Release 8.1 78-15474-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s show count ers Ta b l e 2 - 2 9 describes the possible fields in th e show coun ters comm and out put.
2-747 Catalyst 6500 S eries Switch C o mmand Reference —Release 8.1 78-15474-01 Chapter 2 Catalyst 6500 Series Switch an d ROM Monitor Commands show co unt ers 32-bit coun ters rxCRCA lignEr rors Nu.
2-748 Catalyst 6500 Series Switch Command Refer e nce—Release 8.1 78-15474-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s show count ers dot3StatsSingle ColFr am es A count of successfully t ra nsmitte d fra mes on a p ar tic ular i nte rf ac e f or wh ich tran smission is inhibited b y exac tly one c ollision.
2-749 Catalyst 6500 S eries Switch C o mmand Reference —Release 8.1 78-15474-01 Chapter 2 Catalyst 6500 Series Switch an d ROM Monitor Commands show co unt ers Relat e d Commands clear co unters rxPause Numbe r of c ontr ol f ra mes r ece ived at the gi gabi t l evel.
2-750 Catalyst 6500 Series Switch Command Refer e nce—Release 8.1 78-15474-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s show crypto key show crypt o key T o display RSA key pa ir information, use the sho w crypto k ey comm and.
2-751 Catalyst 6500 S eries Switch C o mmand Reference —Release 8.1 78-15474-01 Chapter 2 Catalyst 6500 Series Switch an d ROM Monitor Commands show de fau lt show defaul t T o che c k the stat us of the d efault po rt s ta tus sett ing, u se the show default command.
2-752 Catalyst 6500 Series Switch Command Refer e nce—Release 8.1 78-15474-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s show dot1 q-all-tagged show dot1q-all-tagg ed T o display the status of the dot1q taggi ng featu re on the switch, use the show dot1q-all-tagged comm and.
Chapter 2 Ca talyst 6 500 Series Swi tch and ROM M onitor Comm ands show dot1 x 2-753 Catalyst 6500 Series Switch Command Refer e nce—Release 8.1 78-15474-01 2 show dot1x T o display the system dot1x capabi lities, protoco l version , and timer val u es, use the show dot1x comm an d.
2-754 Catalyst 6500 Series Switch Command Refer e nce—Release 8.1 78-15474-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s show dvla n statistics show dvlan statistics T o display dynamic VLAN statistic s, use the show dvlan statistics co mmand.
2-755 Catalyst 6500 S eries Switch C o mmand Reference —Release 8.1 78-15474-01 Chapter 2 Catalyst 6500 Series Switch an d ROM Monitor Commands show en vironm ent show environme nt T o display en vironmenta l, temper ature, and inline p o wer statu s informa tion, use the show en vironment comm and.
2-756 Catalyst 6500 Series Switch Command Refer e nce—Release 8.1 78-15474-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s show enviro nment Exam ples Th is exampl e sh ows how to displa y environmen tal st atus in forma ti on: Console> show environment Environmental Status (.
2-757 Catalyst 6500 S eries Switch C o mmand Reference —Release 8.1 78-15474-01 Chapter 2 Catalyst 6500 Series Switch an d ROM Monitor Commands show en vironm ent This exa mple shows ho w to display.
2-758 Catalyst 6500 Series Switch Command Refer e nce—Release 8.1 78-15474-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s show enviro nment This example shows ho w to di splay the in line power status for a spe cific module: Console> show environment power 9 Module 9: Default Inline Power allocation per port: 9.
2-759 Catalyst 6500 S eries Switch C o mmand Reference —Release 8.1 78-15474-01 Chapter 2 Catalyst 6500 Series Switch an d ROM Monitor Commands show en vironm ent This e xample shows h ow to display co nnector rating informa tion: Console> show environment connector Chassis connector rating : 756.
2-760 Catalyst 6500 Series Switch Command Refer e nce—Release 8.1 78-15474-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s show enviro nment Relat e d Commands set inlinepowe r defaultallocation show environment show port inlinepo wer Slot power Require ment/U sage Power Requested Module power requested.
2-761 Catalyst 6500 S eries Switch C o mmand Reference —Release 8.1 78-15474-01 Chapter 2 Catalyst 6500 Series Switch an d ROM Monitor Commands show err dis ab le-timeou t show errdisab le-timeo ut T o displ ay the configurat ion and stat us of the errd isable tim eout, use the sh ow errd isa ble -ti meo ut comm and.
2-762 Catalyst 6500 Series Switch Command Refer e nce—Release 8.1 78-15474-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s show error detecti on show errord etection T o display error detectio n settings, u se the show errord etec ti on command.
2-763 Catalyst 6500 S eries Switch C o mmand Reference —Release 8.1 78-15474-01 Chapter 2 Catalyst 6500 Series Switch an d ROM Monitor Commands show fabri c channe l show fabri c channel T o display Switch Fab ric Module inform ation, use the show fabric channel command.
2-764 Catalyst 6500 Series Switch Command Refer e nce—Release 8.1 78-15474-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s show f abric chan nel Exam ples Th is exampl e sh.
2-765 Catalyst 6500 S eries Switch C o mmand Reference —Release 8.1 78-15474-01 Chapter 2 Catalyst 6500 Series Switch an d ROM Monitor Commands show fabri c channe l 1 txErrors = 0/0/0 2 txDropped =.
2-766 Catalyst 6500 Series Switch Command Refer e nce—Release 8.1 78-15474-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s show f abric chan nel Ta b l e 2 - 3 1 descri bes the f ields in the show fa bric channel output.
2-767 Catalyst 6500 S eries Switch C o mmand Reference —Release 8.1 78-15474-01 Chapter 2 Catalyst 6500 Series Switch an d ROM Monitor Commands show fa bri c status show fabri c status T o di splay the in tegrate d switc h fabric sta tus an d f orward ing speed , use the s how f abric status comm and.
2-768 Catalyst 6500 Series Switch Command Refer e nce—Release 8.1 78-15474-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s show file show file T o display the conte nts of a file that hav e been saved to Flash memory , use the show f ile command.
2-769 Catalyst 6500 S eries Switch C o mmand Reference —Release 8.1 78-15474-01 Chapter 2 Catalyst 6500 Series Switch an d ROM Monitor Commands show fire w a ll show firewall T o displa y the parame ters that ar e config ured for a Fire wall Services Mod ule (FWSM) , use the show fi re w al l command.
2-770 Catalyst 6500 Series Switch Command Refer e nce—Release 8.1 78-15474-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s show fla sh show flash T o list bootfl ash or Flash PC card i nforma tion, including file code n ames, versio n numb ers, volume ID, status , and si z es , us e t he show flash command.
2-771 Catalyst 6500 S eries Switch C o mmand Reference —Release 8.1 78-15474-01 Chapter 2 Catalyst 6500 Series Switch an d ROM Monitor Commands show flas h Console> show flash chips ******** Inte.
2-772 Catalyst 6500 Series Switch Command Refer e nce—Release 8.1 78-15474-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s show fla sh USAGE INFO: Bytes Used = 201D9B Bytes.
2-773 Catalyst 6500 S eries Switch C o mmand Reference —Release 8.1 78-15474-01 Chapter 2 Catalyst 6500 Series Switch an d ROM Monitor Commands show ftp show ftp T o di spla y the pa ramete rs co nf igured for Fil e T ransf er Protoc ol (FTP) , use the show ftp command .
2-774 Catalyst 6500 Series Switch Command Refer e nce—Release 8.1 78-15474-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s show ga rp tim e r show garp timer T o display all the valu es of the General At tr ibute Reg istration Pro tocol (GARP) timers , use the sho w garp timer comm and.
2-775 Catalyst 6500 S eries Switch C o mmand Reference —Release 8.1 78-15474-01 Chapter 2 Catalyst 6500 Series Switch an d ROM Monitor Commands show gmr p configura tion show gmrp conf iguration T o display complete GMRP-rel ated configuration infor mation, use the show gmrp conf igurat ion comm an d.
2-776 Catalyst 6500 Series Switch Command Refer e nce—Release 8.1 78-15474-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s show gmrp stat istics show gmrp statistics T o display all the GMR P-relate d statistics for a specified VLAN , use the show gmrp statistics comm an d.
2-777 Catalyst 6500 S eries Switch C o mmand Reference —Release 8.1 78-15474-01 Chapter 2 Catalyst 6500 Series Switch an d ROM Monitor Commands show gmr p timer show gm rp timer T o display all the values of the GMRP timers, use the show gmrp timer co mman d.
2-778 Catalyst 6500 Series Switch Command Refer e nce—Release 8.1 78-15474-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s show gvr p co nfi gur a tio n show gvrp c onfigur.
2-779 Catalyst 6500 S eries Switch C o mmand Reference —Release 8.1 78-15474-01 Chapter 2 Catalyst 6500 Series Switch an d ROM Monitor Commands show gvrp co nfigu rat ion Disabled Fixed Normal 4/2 Disabled Fixed Active 4/7 Disbled Forb idden Normal 4/3 Disbled Forb idden Active 4/6 GVRP Participants running on no ports.
2-780 Catalyst 6500 Series Switch Command Refer e nce—Release 8.1 78-15474-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s show gvrp stat istics show gvrp statistics T o vie w GVRP statistics for a port, use the show gvrp sta tisti cs command.
2-781 Catalyst 6500 S eries Switch C o mmand Reference —Release 8.1 78-15474-01 Chapter 2 Catalyst 6500 Series Switch an d ROM Monitor Commands show gvrp s tatistic s Relat e d Commands clear g vrp .
2-782 Catalyst 6500 Series Switch Command Refer e nce—Release 8.1 78-15474-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s show ifindex show ifindex T o display the informatio n of the specif ic ifIndex, use the show if index comman d.
2-783 Catalyst 6500 S eries Switch C o mmand Reference —Release 8.1 78-15474-01 Chapter 2 Catalyst 6500 Series Switch an d ROM Monitor Commands show igm p fl oo ding show igmp fl ooding T o d ispl ay w he the r t he IGM P f l oodin g f eat ure i s e nabl ed o r disab l ed, us e t he show i gmp fl ooding comm and.
2-784 Catalyst 6500 Series Switch Command Refer e nce—Release 8.1 78-15474-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s show igmp gd a_status show igmp g da_status T o d.
2-785 Catalyst 6500 S eries Switch C o mmand Reference —Release 8.1 78-15474-01 Chapter 2 Catalyst 6500 Series Switch an d ROM Monitor Commands show igm p le ave-q uery -type show igmp le ave-query-type T o d ispl ay t he ty pe of q ue ry to b e sent whe n a po rt r ece ives a leave mess ag e, us e t he show igmp lea ve-query-type command.
2-786 Catalyst 6500 Series Switch Command Refer e nce—Release 8.1 78-15474-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s show ig mp m ode show igmp mode T o display the IGMP mode on the switch, use the show i gmp mode comman d.
2-787 Catalyst 6500 S eries Switch C o mmand Reference —Release 8.1 78-15474-01 Chapter 2 Catalyst 6500 Series Switch an d ROM Monitor Commands show igm p qu erier info rmatio n show igmp querier information T o disp lay queri er inf ormatio n specific to a c onfigured V LAN, us e the show igmp queri er inf ormation comm and.
2-788 Catalyst 6500 Series Switch Command Refer e nce—Release 8.1 78-15474-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s show igmp ratelimit-info show igmp ratelimit-info.
2-789 Catalyst 6500 S eries Switch C o mmand Reference —Release 8.1 78-15474-01 Chapter 2 Catalyst 6500 Series Switch an d ROM Monitor Commands show igm p s tatistics show igmp statistics T o vie w IGMP statistics f or a partic u lar VLAN, use the sho w igmp statistics comm and.
2-790 Catalyst 6500 Series Switch Command Refer e nce—Release 8.1 78-15474-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s sh ow ig mp st a t is ti c s Relat e d Commands c.
2-791 Catalyst 6500 S eries Switch C o mmand Reference —Release 8.1 78-15474-01 Chapter 2 Catalyst 6500 Series Switch an d ROM Monitor Commands show im agem ib show imagemib T o display i mage infor mation pr ov ided in th e CISCO-IM A GE -MIB for a particu lar imag e, us e the show imagemib command.
2-792 Catalyst 6500 Series Switch Command Refer e nce—Release 8.1 78-15474-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s show interface show interface T o display information on ne twork interf aces, use the show inte rface command .
2-793 Catalyst 6500 S eries Switch C o mmand Reference —Release 8.1 78-15474-01 Chapter 2 Catalyst 6500 Series Switch an d ROM Monitor Commands show inte rfa ce Relat e d Commands set interface dest IP address of the host to which the console por t will be conn ected.
2-794 Catalyst 6500 Series Switch Command Refer e nce—Release 8.1 78-15474-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s show ip alias show ip alias T o s how a listi ng of de fined IP ali ases, use the show ip alias co mman d.
Chapter 2 Ca talyst 6 500 Series Swi tch and ROM M onitor Comm ands show ip dns 2-795 Catalyst 6500 Series Switch Command Refer e nce—Release 8.1 78-15474-01 2 show ip dns T o s how the DNS name server s and the de fault D NS dom ain nam e, us e t he show ip dns command.
2-796 Catalyst 6500 Series Switch Command Refer e nce—Release 8.1 78-15474-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s show ip d ns Relat e d Commands clear ip dns doma.
2-797 Catalyst 6500 S eries Switch C o mmand Reference —Release 8.1 78-15474-01 Chapter 2 Catalyst 6500 Series Switch an d ROM Monitor Commands show ip htt p show ip http T o vie w the HTTP config uration and the switch web interf ace informatio n, use the show ip http comm and.
2-798 Catalyst 6500 Series Switch Command Refer e nce—Release 8.1 78-15474-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s show ip http This e xample sho ws the HTTP conf i.
2-799 Catalyst 6500 S eries Switch C o mmand Reference —Release 8.1 78-15474-01 Chapter 2 Catalyst 6500 Series Switch an d ROM Monitor Commands show ip perm i t show ip permit T o display the IP permit list information , use the show ip pe rmit command.
2-800 Catalyst 6500 Series Switch Command Refer e nce—Release 8.1 78-15474-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s show ip permit Relat e d Commands clear ip permit set ip permit set snmp tr ap Last Accessed T ime Date and time of the last attempt to log in to the switch from the address.
Chapter 2 Ca talyst 6 500 Series Swi tch and ROM M onitor Comm ands show ip rout e 2-801 Catalyst 6500 Series Switch Command Refer e nce—Release 8.1 78-15474-01 2s2 show ip route T o display IP routing table entries, use the show ip route command. show ip r oute [ noalias ] Syntax Descript ion Defaults Thi s command has no de fault setti ngs.
2-802 Catalyst 6500 Series Switch Command Refer e nce—Release 8.1 78-15474-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s show ip r out e Relat e d Commands clear ip r out.
2-803 Catalyst 6500 S eries Switch C o mmand Reference —Release 8.1 78-15474-01 Chapter 2 Catalyst 6500 Series Switch an d ROM Monitor Commands show ke rber os show ke rbero s T o display the K erberos conf iguration information , use the show kerberos command.
2-804 Catalyst 6500 Series Switch Command Refer e nce—Release 8.1 78-15474-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s show kerberos Relat e d Commands clear ke rberos .
2-805 Catalyst 6500 S eries Switch C o mmand Reference —Release 8.1 78-15474-01 Chapter 2 Catalyst 6500 Series Switch an d ROM Monitor Commands show l2pr otocol-t unnel sta ti st ic s show l2pro toc.
2-806 Catalyst 6500 Series Switch Command Refer e nce—Release 8.1 78-15474-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s show l2 protoco l-tunnel stati stics Port VTP Fra.
2-807 Catalyst 6500 S eries Switch C o mmand Reference —Release 8.1 78-15474-01 Chapter 2 Catalyst 6500 Series Switch an d ROM Monitor Commands show lacp- channel show lacp-cha nnel T o di splay inf or matio n abo ut the Li nk Aggr egation Contr ol Pr otoc ol ( LACP) channe l, use the show lacp-channel comman d.
2-808 Catalyst 6500 Series Switch Command Refer e nce—Release 8.1 78-15474-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s show l acp-channel Command Mode s Normal. Usage Guid el i nes If you do not speci fy the admi n-key v alue, infor mation ab out all LA CP channels is displayed.
2-809 Catalyst 6500 S eries Switch C o mmand Reference —Release 8.1 78-15474-01 Chapter 2 Catalyst 6500 Series Switch an d ROM Monitor Commands show lacp- channel This example shows how to display L.
2-810 Catalyst 6500 Series Switch Command Refer e nce—Release 8.1 78-15474-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s show l acp-channel This example shows how to display the outgo ing port for th e specified source and destination IP addresses: Console> (enable) show lacp-channel hash 808 172.
2-811 Catalyst 6500 S eries Switch C o mmand Reference —Release 8.1 78-15474-01 Chapter 2 Catalyst 6500 Series Switch an d ROM Monitor Commands show lcper roracti on show lcperroract ion T o di spla.
2-812 Catalyst 6500 Series Switch Command Refer e nce—Release 8.1 78-15474-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s show lda show lda T o displa y the ASLB conf iguration informati on, use the sho w lda comman d.
2-813 Catalyst 6500 S eries Switch C o mmand Reference —Release 8.1 78-15474-01 Chapter 2 Catalyst 6500 Series Switch an d ROM Monitor Commands show lda Command Mode s Normal.
2-814 Catalyst 6500 Series Switch Command Refer e nce—Release 8.1 78-15474-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s show lda LD Router Side: --------------- Router a.
2-815 Catalyst 6500 S eries Switch C o mmand Reference —Release 8.1 78-15474-01 Chapter 2 Catalyst 6500 Series Switch an d ROM Monitor Commands show lda This example shows ho w to di splay the num b.
2-816 Catalyst 6500 Series Switch Command Refer e nce—Release 8.1 78-15474-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s show localuser show localu ser T o display the local user ac counts for a switch, use the show loca luser comma n d.
2-817 Catalyst 6500 S eries Switch C o mmand Reference —Release 8.1 78-15474-01 Chapter 2 Catalyst 6500 Series Switch an d ROM Monitor Commands show log show log T o display the error log for the system or a specif ic module, use the show log comman d.
2-818 Catalyst 6500 Series Switch Command Refer e nce—Release 8.1 78-15474-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s show log NVRAM log: 01.
2-819 Catalyst 6500 S eries Switch C o mmand Reference —Release 8.1 78-15474-01 Chapter 2 Catalyst 6500 Series Switch an d ROM Monitor Commands show log com mand show log comma nd T o dis play th e comm and lo g entries, u s e th e show log command command.
2-820 Catalyst 6500 Series Switch Command Refer e nce—Release 8.1 78-15474-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s show l ogging show loggin g T o display the system m essage log info rma tion, u se the show logging command .
2-821 Catalyst 6500 S eries Switch C o mmand Reference —Release 8.1 78-15474-01 Chapter 2 Catalyst 6500 Series Switch an d ROM Monitor Commands show loggi ng qos 7 7 radius 7 7 rsvp 7 7 security 7 7.
2-822 Catalyst 6500 Series Switch Command Refer e nce—Release 8.1 78-15474-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s show log ging buff er show loggin g buffer T o display sy stem m essages fro m the internal buf fer , use the show log ging buffer co mmand.
2-823 Catalyst 6500 S eries Switch C o mmand Reference —Release 8.1 78-15474-01 Chapter 2 Catalyst 6500 Series Switch an d ROM Monitor Commands show loggi ng callho me show loggin g callhome T o display the conf igured CallHo me settings, use the sho w logging callhome command.
2-824 Catalyst 6500 Series Switch Command Refer e nce—Release 8.1 78-15474-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s show logging callhome Relat e d Commands clear lo.
2-825 Catalyst 6500 S eries Switch C o mmand Reference —Release 8.1 78-15474-01 Chapter 2 Catalyst 6500 Series Switch an d ROM Monitor Commands show lo ggi ng callho me de st ination show loggin g callhome destination T o display the add resses set to re ceiv e CallHome sy slog message s, use the show logging callhome destination com mand.
2-826 Catalyst 6500 Series Switch Command Refer e nce—Release 8.1 78-15474-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s show logging callhome destination Relat e d Comma.
2-827 Catalyst 6500 S eries Switch C o mmand Reference —Release 8.1 78-15474-01 Chapter 2 Catalyst 6500 Series Switch an d ROM Monitor Commands show loggi ng callho me from show loggin g callhome from T o display the From address in the CallHome syslog messages, use the show loggi ng cal lhome from comm and.
2-828 Catalyst 6500 Series Switch Command Refer e nce—Release 8.1 78-15474-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s show logg ing call home reply- to show loggin g callhome repl y-to T o display th e Reply-to addre ss in the Cal lHome syslog messag es, use the show logging callhome rep l y -t o command.
2-829 Catalyst 6500 S eries Switch C o mmand Reference —Release 8.1 78-15474-01 Chapter 2 Catalyst 6500 Series Switch an d ROM Monitor Commands show lo ggi ng call ho me se ve rity show loggin g cal.
2-830 Catalyst 6500 Series Switch Command Refer e nce—Release 8.1 78-15474-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s show logg ing callh ome smtp-s erver show loggin .
2-831 Catalyst 6500 S eries Switch C o mmand Reference —Release 8.1 78-15474-01 Chapter 2 Catalyst 6500 Series Switch an d ROM Monitor Commands show mac show mac T o display MA C counters, use the show mac comman d. show mac [ utilization ] [ mod [/ port ]] Syntax D escr i pti on Defaults Thi s command has no de fault setti ngs.
2-832 Catalyst 6500 Series Switch Command Refer e nce—Release 8.1 78-15474-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s show ma c -------- ---------- ---------- --------.
2-833 Catalyst 6500 S eries Switch C o mmand Reference —Release 8.1 78-15474-01 Chapter 2 Catalyst 6500 Series Switch an d ROM Monitor Commands show mac Rcv -Octet Numbe r of octe t frames re ceived on the port. Xmit-Octet Nu mber o f octet f rames tran smitted on the port.
2-834 Catalyst 6500 Series Switch Command Refer e nce—Release 8.1 78-15474-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s show microco de show microcode T o displ ay the version of the microco de and the modu le version info rmation, use the show microco de comm and.
2-835 Catalyst 6500 S eries Switch C o mmand Reference —Release 8.1 78-15474-01 Chapter 2 Catalyst 6500 Series Switch an d ROM Monitor Commands show ml s show mls T o display MLS Layer 3 packet inf ormation in t h e MLS-ba sed Catalyst 6500 series swi tches, use the show mls com mand.
2-836 Catalyst 6500 Series Switch Command Refer e nce—Release 8.1 78-15474-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s show mls MSFC ID Module XTAG MAC Vlans --------------- ------ ---- ----------------- -------------------- 52.
2-837 Catalyst 6500 S eries Switch C o mmand Reference —Release 8.1 78-15474-01 Chapter 2 Catalyst 6500 Series Switch an d ROM Monitor Commands show ml s acl-ro ut e show mls acl-route T o display summari e s from A CL for r o uting in the MLS-based Cata lyst 6500 series switches, use the show mls acl-r oute command.
2-838 Catalyst 6500 Series Switch Command Refer e nce—Release 8.1 78-15474-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s show ml s cef e xac t-r ou te show mls cef exact .
2-839 Catalyst 6500 S eries Switch C o mmand Reference —Release 8.1 78-15474-01 Chapter 2 Catalyst 6500 Series Switch an d ROM Monitor Commands show ml s c e f in te rfa ce show mls cef interface T o display MSFC VLAN information, use the sh ow mls cef i nterf ace command.
2-840 Catalyst 6500 Series Switch Command Refer e nce—Release 8.1 78-15474-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s show mls cef interface This e xample sho w ho w to displa y information fo r a specif ic CEF VLAN: Console> (enable) show mls cef interface 46 Module 16: vlan 46, IP Address 46.
2-841 Catalyst 6500 S eries Switch C o mmand Reference —Release 8.1 78-15474-01 Chapter 2 Catalyst 6500 Series Switch an d ROM Monitor Commands show ml s cef mac show mls cef mac T o displ ay bott o.
2-842 Catalyst 6500 Series Switch Command Refer e nce—Release 8.1 78-15474-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s show mls cef rpf show mls cef rpf T o disp lay reverse path f orwarding (RPF) mo de info rmati on, stat istics, and VLA N tabl e conte nt, use the show mls cef rpf command.
2-843 Catalyst 6500 S eries Switch C o mmand Reference —Release 8.1 78-15474-01 Chapter 2 Catalyst 6500 Series Switch an d ROM Monitor Commands show ml s cef rpf This exam ple shows how to displ ay .
2-844 Catalyst 6500 Series Switch Command Refer e nce—Release 8.1 78-15474-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s show mls cef summary show mls cef summary T o display a summary of CEF table information , use the show mls cef summary comman d.
2-845 Catalyst 6500 S eries Switch C o mmand Reference —Release 8.1 78-15474-01 Chapter 2 Catalyst 6500 Series Switch an d ROM Monitor Commands show mls cef summary Relat e d Commands clear mls cef sho w mls cef interfa ce show mls cef mac sho w mls entry cef IPX r out e e ntri es N umbe r of IP X ro ut e en t ries.
2-846 Catalyst 6500 Series Switch Command Refer e nce—Release 8.1 78-15474-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s show mls entry show mls entry T o display state information in the M L S-based Cataly st 6500 series switches, use the sho w mls entry comm and.
2-847 Catalyst 6500 S eries Switch C o mmand Reference —Release 8.1 78-15474-01 Chapter 2 Catalyst 6500 Series Switch an d ROM Monitor Commands show ml s entry Usage Guid el i nes On swit che s conf.
2-848 Catalyst 6500 Series Switch Command Refer e nce—Release 8.1 78-15474-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s show mls entry The show mls entry com mand disp lays bridge d flows on a Supervisor En gine 1 when bridg ed flow statistics is enabled.
2-849 Catalyst 6500 S eries Switch C o mmand Reference —Release 8.1 78-15474-01 Chapter 2 Catalyst 6500 Series Switch an d ROM Monitor Commands show ml s entry For destinati on-only flow: Console>.
2-850 Catalyst 6500 Series Switch Command Refer e nce—Release 8.1 78-15474-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s show mls entry 401.
2-851 Catalyst 6500 S eries Switch C o mmand Reference —Release 8.1 78-15474-01 Chapter 2 Catalyst 6500 Series Switch an d ROM Monitor Commands show ml s entry 0.0.0.2 0.0.0.2 2 201 101 cc-cc-cc-cc-cc-cc 2 ARPA 0 0 01:03:21 01:00:51 cccccccc cccccccc 0.
2-852 Catalyst 6500 Series Switch Command Refer e nce—Release 8.1 78-15474-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s show mls entry cef show mls entry cef T o display CEF and adjacenc y entries (and Tx statistics) for IP resolved entries an d IPX resolved or connect ed entries, us e the show mls entry cef comm and.
2-853 Catalyst 6500 S eries Switch C o mmand Reference —Release 8.1 78-15474-01 Chapter 2 Catalyst 6500 Series Switch an d ROM Monitor Commands show ml s entry cef Exam ples This example sho ws how .
2-854 Catalyst 6500 Series Switch Command Refer e nce—Release 8.1 78-15474-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s show mls entry cef This exam ple sh ows how to displa y adj ace ncy infor mat ion: Console> (enable) show mls entry cef ip adjacency Mod: 16 Destination-IP: 127.
2-855 Catalyst 6500 S eries Switch C o mmand Reference —Release 8.1 78-15474-01 Chapter 2 Catalyst 6500 Series Switch an d ROM Monitor Commands show ml s entry cef Relat e d Commands clear mls cef c.
2-856 Catalyst 6500 Series Switch Command Refer e nce—Release 8.1 78-15474-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s show mls entry netflow-route show mls entry netflow-route T o display shortcut informatio n in the MLS-based Catalyst 6500 series switches, use the show mls entry netflow-r oute comman d.
2-857 Catalyst 6500 S eries Switch C o mmand Reference —Release 8.1 78-15474-01 Chapter 2 Catalyst 6500 Series Switch an d ROM Monitor Commands show ml s entry net flow-ro ut e Ente rin g th e desti.
2-858 Catalyst 6500 Series Switch Command Refer e nce—Release 8.1 78-15474-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s show mls exc lude proto col show mls exclude protocol T o displa y excluded pr otocols on T CP or UDP f rom being sho rtcuts, u se the show mls exclud e prot ocol comm and.
2-859 Catalyst 6500 S eries Switch C o mmand Reference —Release 8.1 78-15474-01 Chapter 2 Catalyst 6500 Series Switch an d ROM Monitor Commands show mls mu lticast show mls multicast T o display IP multicast MLS inform ation, use the show mls multicast comm and.
2-860 Catalyst 6500 Series Switch Command Refer e nce—Release 8.1 78-15474-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s show mls multicast If you disab le DNS, no name c an be specified or shown.
2-861 Catalyst 6500 S eries Switch C o mmand Reference —Release 8.1 78-15474-01 Chapter 2 Catalyst 6500 Series Switch an d ROM Monitor Commands show mls mu lticast This e xample shows h ow to displa.
2-862 Catalyst 6500 Series Switch Command Refer e nce—Release 8.1 78-15474-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s show mls multicast This example shows ho w to dis.
2-863 Catalyst 6500 S eries Switch C o mmand Reference —Release 8.1 78-15474-01 Chapter 2 Catalyst 6500 Series Switch an d ROM Monitor Commands show ml s nde show mls nde T o display NetFlo w Data Export informati on, use the show mls nde comm and. show ml s nde Syntax D escr i pti on This comm a nd ha s n o argume nts.
2-864 Catalyst 6500 Series Switch Command Refer e nce—Release 8.1 78-15474-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s show mls n etflow-route show mls netflow-route T o display summar ies from NetFlo w for routing in the MLS-based Catalyst 6500 series switch es, use the show mls netflow -route command .
2-865 Catalyst 6500 S eries Switch C o mmand Reference —Release 8.1 78-15474-01 Chapter 2 Catalyst 6500 Series Switch an d ROM Monitor Commands show mls pb r-route show mls pbr-route T o display statistics about polic y-based routing (PBR) traff ic, use the show ml s pbr -route comm and.
2-866 Catalyst 6500 Series Switch Command Refer e nce—Release 8.1 78-15474-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s show mls stati stics show mls statistics T o display MLS statistics info rmation in the MLS-based Cata lyst 6500 seri es switches, use the show mls statistics command.
2-867 Catalyst 6500 S eries Switch C o mmand Reference —Release 8.1 78-15474-01 Chapter 2 Catalyst 6500 Series Switch an d ROM Monitor Commands show ml s statis t ics Usage Guid el i nes If your sys.
2-868 Catalyst 6500 Series Switch Command Refer e nce—Release 8.1 78-15474-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s show mls stati stics Protocol TotalFlows TotalPac.
2-869 Catalyst 6500 S eries Switch C o mmand Reference —Release 8.1 78-15474-01 Chapter 2 Catalyst 6500 Series Switch an d ROM Monitor Commands show ml s statis t ics Note Th e foll owing command s are ou tput fr om switc hes configu red wit h the Sup ervisor Engin e 1 with Lay er 3 Switchi ng Eng in e WS-F6 K-PFC.
2-870 Catalyst 6500 Series Switch Command Refer e nce—Release 8.1 78-15474-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s show mls verify show mls verify T o disp lay the Layer 3 error chec king conf igur ation , use the show mls verify command .
2-871 Catalyst 6500 S eries Switch C o mmand Reference —Release 8.1 78-15474-01 Chapter 2 Catalyst 6500 Series Switch an d ROM Monitor Commands show mod ule show module T o disp lay modu l e status a nd i n forma t ion, use the show module co mma nd.
2-872 Catalyst 6500 Series Switch Command Refer e nce—Release 8.1 78-15474-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s sh ow m o dul e Mod MAC-Address(es) Hw Fw Sw --- -------------------------------------- ------ ---------- -------------- 1 00-30-80-f7-a5-06 to 00-30-80-f7-a5-07 1.
2-873 Catalyst 6500 S eries Switch C o mmand Reference —Release 8.1 78-15474-01 Chapter 2 Catalyst 6500 Series Switch an d ROM Monitor Commands show mod ule This exam ple sh ows the dis play f or a .
2-874 Catalyst 6500 Series Switch Command Refer e nce—Release 8.1 78-15474-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s show moduleinit show moduleinit T o d ispl ay c onte nts of the i nform ation stor e d in the sy stem m odule i n itiatio n lo g, use the show moduleinit co mmand.
2-875 Catalyst 6500 S eries Switch C o mmand Reference —Release 8.1 78-15474-01 Chapter 2 Catalyst 6500 Series Switch an d ROM Monitor Commands show mod ule init Success_Exit State 2: Entry/Exit/Ela.
2-876 Catalyst 6500 Series Switch Command Refer e nce—Release 8.1 78-15474-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s show msfc autostate show msfcautosta te T o display the Multilayer Switc h Feature Card (MSFC) auto port state, use the show msfcautosta te comm and.
2-877 Catalyst 6500 S eries Switch C o mmand Reference —Release 8.1 78-15474-01 Chapter 2 Catalyst 6500 Series Switch an d ROM Monitor Commands show ms m aut ostate show msmautosta te T o display t .
2-878 Catalyst 6500 Series Switch Command Refer e nce—Release 8.1 78-15474-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s show multicast group show multi cast group T o display the multicast group conf iguration, use the show multicast group comm and.
2-879 Catalyst 6500 S eries Switch C o mmand Reference —Release 8.1 78-15474-01 Chapter 2 Catalyst 6500 Series Switch an d ROM Monitor Commands show mult icast gr oup Relat e d Commands clear multi cast router set multicast router show multicast r outer CoS CoS v alue .
2-880 Catalyst 6500 Series Switch Command Refer e nce—Release 8.1 78-15474-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s show multicast group count show multi cast group coun t T o show the total count of multicast addresses (g roups) in a VLAN, use th e s how multicast group c ount comm and.
2-881 Catalyst 6500 S eries Switch C o mmand Reference —Release 8.1 78-15474-01 Chapter 2 Catalyst 6500 Series Switch an d ROM Monitor Commands show mul ticast pr ot ocols st atus show multicast protocols status T o display the status of Layer 2 multicast pro tocol s on the switch, use the sho w multi cast prot ocols status comma nd.
2-882 Catalyst 6500 Series Switch Command Refer e nce—Release 8.1 78-15474-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s show multicast router show multicast router T o displa y the port s that have IGMP or RGMP -cap able rou ters assigne d to them, use the show multicast rou t er command.
2-883 Catalyst 6500 S eries Switch C o mmand Reference —Release 8.1 78-15474-01 Chapter 2 Catalyst 6500 Series Switch an d ROM Monitor Commands show mul ti ca st router Ta b l e 2 - 5 5 descr ibes the f ields in the show multic a st r outer command outp ut.
2-884 Catalyst 6500 Series Switch Command Refer e nce—Release 8.1 78-15474-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s show multicast v3-group show multicast v3-group T o di splay IGM P version 3 in for mati on ba sed on grou p I P a ddre ss, use t he show mu lti cast v3 -gro up comm and.
2-885 Catalyst 6500 S eries Switch C o mmand Reference —Release 8.1 78-15474-01 Chapter 2 Catalyst 6500 Series Switch an d ROM Monitor Commands show ne ts tat show netstat T o display the current ly activ e network connections an d to list statistics for the v arious protocols in the TCP/IP , use the show netstat comman d.
2-886 Catalyst 6500 Series Switch Command Refer e nce—Release 8.1 78-15474-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s show net stat 69 duplicate acks 0 acks for unsent data 3468 packets (15367 bytes) received in-sequence 12 completely duplicate packets (20 bytes) 0 packets with some dup.
2-887 Catalyst 6500 S eries Switch C o mmand Reference —Release 8.1 78-15474-01 Chapter 2 Catalyst 6500 Series Switch an d ROM Monitor Commands show ne ts tat This exam ple sh ows how to displ ay U .
2-888 Catalyst 6500 Series Switch Command Refer e nce—Release 8.1 78-15474-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s show net stat Ta b l e 2 - 5 7 descri bes the f ields in the show netst at udp comman d o ut pu t.
2-889 Catalyst 6500 S eries Switch C o mmand Reference —Release 8.1 78-15474-01 Chapter 2 Catalyst 6500 Series Switch an d ROM Monitor Commands show ne ts tat This example shows how to display I CMP.
2-890 Catalyst 6500 Series Switch Command Refer e nce—Release 8.1 78-15474-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s show net stat This exam ple sh ows how to displa y the IP r out ing ta ble: Console> show netstat routes DESTINATION GATEWAY FLAGS USE INTERFACE default 172.
2-891 Catalyst 6500 S eries Switch C o mmand Reference —Release 8.1 78-15474-01 Chapter 2 Catalyst 6500 Series Switch an d ROM Monitor Commands show ne ts tat Ta b l e 2 - 6 1 descr ibes the f ields in the sho w netsta t inte rface comman d output.
2-892 Catalyst 6500 Series Switch Command Refer e nce—Release 8.1 78-15474-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s show ntp show ntp T o displa y the curren t NTP status, us e the show ntp command . show ntp Syntax Descript ion This c omm and ha s no a rgume nts o r keywords.
2-893 Catalyst 6500 S eries Switch C o mmand Reference —Release 8.1 78-15474-01 Chapter 2 Catalyst 6500 Series Switch an d ROM Monitor Commands show ntp Relat e d Commands clear ntp ser ver set ntp .
2-894 Catalyst 6500 Series Switch Command Refer e nce—Release 8.1 78-15474-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s show pbf show pbf T o display PBF-related information , use the show pbf comman d.
2-895 Catalyst 6500 S eries Switch C o mmand Reference —Release 8.1 78-15474-01 Chapter 2 Catalyst 6500 Series Switch an d ROM Monitor Commands show pb f This exam ple sh ows how to displ ay a dja c.
2-896 Catalyst 6500 Series Switch Command Refer e nce—Release 8.1 78-15474-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s show pbf Relat e d Commands clear pbf set pbf.
2-897 Catalyst 6500 S eries Switch C o mmand Reference —Release 8.1 78-15474-01 Chapter 2 Catalyst 6500 Series Switch an d ROM Monitor Commands show pb f-ma p show pbf-map T o display PBF map information, use the show pbf- map co mmand . show pbf-map { vla n | config } Syntax D escr i pti on Defaults Thi s command has no de fault setti ngs.
Chapter 2 Ca talyst 6 500 Series Swi tch and ROM M onitor Comm ands show port 2-898 Catalyst 6500 Series Switch Command Refer e nce—Release 8.1 78-15474-01 22 show port T o disp lay port st atus infor mation, us e the show port comm and. show port [ mod [ /port ]] Syntax Descript ion Defaults Thi s command has no de fault setti ngs.
2-899 Catalyst 6500 S eries Switch C o mmand Reference —Release 8.1 78-15474-01 Chapter 2 Catalyst 6500 Series Switch an d ROM Monitor Commands show po rt Exam ples Th is example shows how to displa.
2-900 Catalyst 6500 Series Switch Command Refer e nce—Release 8.1 78-15474-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s show port Port Security Violation Shutdown-Time A.
2-901 Catalyst 6500 S eries Switch C o mmand Reference —Release 8.1 78-15474-01 Chapter 2 Catalyst 6500 Series Switch an d ROM Monitor Commands show po rt 7/8 enable 00-10-7b-00-0a-5f (Port host pro.
2-902 Catalyst 6500 Series Switch Command Refer e nce—Release 8.1 78-15474-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s show port 3/8 onhook 1 full 64k FXS 3/9 onhook 1 .
2-903 Catalyst 6500 S eries Switch C o mmand Reference —Release 8.1 78-15474-01 Chapter 2 Catalyst 6500 Series Switch an d ROM Monitor Commands show po rt Ta b l e 2 - 6 3 describe s the possib le fields (de pending on the p ort type q ueried ) in the show port co mman d output.
2-904 Catalyst 6500 Series Switch Command Refer e nce—Release 8.1 78-15474-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s show port Unde rSize Numbe r of received frames less th an 64 octets long (but are otherw ise wel l-form ed).
2-905 Catalyst 6500 S eries Switch C o mmand Reference —Release 8.1 78-15474-01 Chapter 2 Catalyst 6500 Series Switch an d ROM Monitor Commands show po rt Relat e d Commands set port disable set port enable show port status Lem-Re j-Ct Number of times a c o nnec tion w as rejected becau se of e xcessi ve LEM errors .
2-906 Catalyst 6500 Series Switch Command Refer e nce—Release 8.1 78-15474-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s show po rt arp- inspect ion show port a rp-inspection T o d isplay the dro p thr eshol d an d shutdown t hres hol d for sp ec ific por ts, u se the show port arp-inspection comman d.
2-907 Catalyst 6500 S eries Switch C o mmand Reference —Release 8.1 78-15474-01 Chapter 2 Catalyst 6500 Series Switch an d ROM Monitor Commands show po rt au xiliaryvl an show port auxiliaryvlan T o display the port auxiliary VLAN status for a specif ic port, use th e sho w port au xiliar yvlan comm and.
2-908 Catalyst 6500 Series Switch Command Refer e nce—Release 8.1 78-15474-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s show port au xiliaryv lan This exam ple sh ows ho.
2-909 Catalyst 6500 S eries Switch C o mmand Reference —Release 8.1 78-15474-01 Chapter 2 Catalyst 6500 Series Switch an d ROM Monitor Commands show po rt br oadcas t show port b roadcast T o display broadcast information, use the show port br oadcast comma nd .
2-910 Catalyst 6500 Series Switch Command Refer e nce—Release 8.1 78-15474-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s show port br oad ca st Relat e d Commands set port broadcast T otal-Drop Nu mber o f broadca st, multicast, and unicast pa ckets dr opped because the port bro adcast l imit was exc eeded.
2-911 Catalyst 6500 S eries Switch C o mmand Reference —Release 8.1 78-15474-01 Chapter 2 Catalyst 6500 Series Switch an d ROM Monitor Commands show po rt ca pabilitie s show port c apabilities T o display the capabilit ies on the ports, use the show port capabilit ies comm and.
2-912 Catalyst 6500 Series Switch Command Refer e nce—Release 8.1 78-15474-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s show port capabilities This e xample shows th e p.
2-913 Catalyst 6500 S eries Switch C o mmand Reference —Release 8.1 78-15474-01 Chapter 2 Catalyst 6500 Series Switch an d ROM Monitor Commands show po rt ca pabilitie s This e xample sho ws the por.
2-914 Catalyst 6500 Series Switch Command Refer e nce—Release 8.1 78-15474-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s show port capabilities Ta b l e 2 - 6 6 describ es the possibl e fields (dep ending on th e type of port queried ) and the values in th e show port capa bilities c ommand outp ut.
2-915 Catalyst 6500 S eries Switch C o mmand Reference —Release 8.1 78-15474-01 Chapter 2 Catalyst 6500 Series Switch an d ROM Monitor Commands show po rt ca pabilitie s Relat e d Commands set port .
2-916 Catalyst 6500 Series Switch Command Refer e nce—Release 8.1 78-15474-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s sho w po r t cd p show po rt cd p T o display the port CDP enable state and the message interv al, use the show port cdp command .
2-917 Catalyst 6500 S eries Switch C o mmand Reference —Release 8.1 78-15474-01 Chapter 2 Catalyst 6500 Series Switch an d ROM Monitor Commands show po rt cd p Relat e d Commands set cdp show cdp.
2-918 Catalyst 6500 Series Switch Command Refer e nce—Release 8.1 78-15474-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s show port c hannel show port c hannel T o disp lay Ether Chan n el inf ormati on, us e the show port channel command.
2-919 Catalyst 6500 S eries Switch C o mmand Reference —Release 8.1 78-15474-01 Chapter 2 Catalyst 6500 Series Switch an d ROM Monitor Commands show po rt ch annel Exam ples Th is exampl e sh ows ho.
2-920 Catalyst 6500 Series Switch Command Refer e nce—Release 8.1 78-15474-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s show port c hannel Port Port Portfast Port Port p.
2-921 Catalyst 6500 S eries Switch C o mmand Reference —Release 8.1 78-15474-01 Chapter 2 Catalyst 6500 Series Switch an d ROM Monitor Commands show po rt ch annel 3/3 enabled normal disabled 3/4 en.
2-922 Catalyst 6500 Series Switch Command Refer e nce—Release 8.1 78-15474-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s show port c hannel Speed S pee d s etti ng for t he por t (a uto, 1 0, 10 0, 10 00). Dupl ex Duplex setti ng for the por t (auto, ful l, half).
2-923 Catalyst 6500 S eries Switch C o mmand Reference —Release 8.1 78-15474-01 Chapter 2 Catalyst 6500 Series Switch an d ROM Monitor Commands show po rt ch annel Relat e d Commands set port channel show channel sho w chann el gr oup GVRP regist ration Stat us of the ad ministra tive control of an outbo und port (nor mal, fixed, forbidden).
2-924 Catalyst 6500 Series Switch Command Refer e nce—Release 8.1 78-15474-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s show port c ops show port c ops T o display COPS informat ion on all or individual port s, use the s how port cops command .
2-925 Catalyst 6500 S eries Switch C o mmand Reference —Release 8.1 78-15474-01 Chapter 2 Catalyst 6500 Series Switch an d ROM Monitor Commands show po rt co ps This example shows how to display COP.
2-926 Catalyst 6500 Series Switch Command Refer e nce—Release 8.1 78-15474-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s show por t count ers show port c ount ers T o sho w all the counters for a port, u se the show port counters command.
2-927 Catalyst 6500 S eries Switch C o mmand Reference —Release 8.1 78-15474-01 Chapter 2 Catalyst 6500 Series Switch an d ROM Monitor Commands show po rt co unters Ta b l e 2 - 7 0 describ es the possib le fields (de pending on the port t ype que ried) in th e show port count ers comm an d o utpu t.
2-928 Catalyst 6500 Series Switch Command Refer e nce—Release 8.1 78-15474-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s sh ow po rt debo u nc e show port d ebounce T o displa y whether the port debo unce timer s are enabled or disable d, use the show port debounce comm and.
2-929 Catalyst 6500 S eries Switch C o mmand Reference —Release 8.1 78-15474-01 Chapter 2 Catalyst 6500 Series Switch an d ROM Monitor Commands show po rt do t1q-all-ta gged show port d ot1q-all-tagged T o sho w the status of the dot1q-a ll-tagged featur e on all or specif ic ports, use the show port dot1q-all-tagged com mand.
2-930 Catalyst 6500 Series Switch Command Refer e nce—Release 8.1 78-15474-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s show port do t1q-eth ertype show port d ot1q-ethertyp e T o s how the stat us of t he 8 02. 1q Eth er type field on a ll or spec ific port s, us e t he show port dot1q-ethertype comm and.
2-931 Catalyst 6500 S eries Switch C o mmand Reference —Release 8.1 78-15474-01 Chapter 2 Catalyst 6500 Series Switch an d ROM Monitor Commands show po rt do t1qtunn el show port d ot1qtunnel T o d isplay the dot1q tun nel mo de sta tus, use the show port dot1qtunnel command.
2-932 Catalyst 6500 Series Switch Command Refer e nce—Release 8.1 78-15474-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s show po rt dot1x show po rt dot1x T o displa y al.
2-933 Catalyst 6500 S eries Switch C o mmand Reference —Release 8.1 78-15474-01 Chapter 2 Catalyst 6500 Series Switch an d ROM Monitor Commands show po rt do t1x Th i s ex am pl e displays the stati.
2-934 Catalyst 6500 Series Switch Command Refer e nce—Release 8.1 78-15474-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s show por t errdi sable-t imeout show port e rrdis.
2-935 Catalyst 6500 S eries Switch C o mmand Reference —Release 8.1 78-15474-01 Chapter 2 Catalyst 6500 Series Switch an d ROM Monitor Commands show po rt er rdisable -timeout This e xample sho ws t.
2-936 Catalyst 6500 Series Switch Command Refer e nce—Release 8.1 78-15474-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s show por t flowcontr ol show port fl owcontrol T o display per-por t status inf ormation and statistics rela ted to fl ow control, use the show port flowcont rol command.
2-937 Catalyst 6500 S eries Switch C o mmand Reference —Release 8.1 78-15474-01 Chapter 2 Catalyst 6500 Series Switch an d ROM Monitor Commands show po rt f low c ontrol Ta b l e 2 - 7 1 descr ibes the f ields in the sh ow po rt fl ow c on tro l command outp ut.
2-938 Catalyst 6500 Series Switch Command Refer e nce—Release 8.1 78-15474-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s show port inl ine p owe r show port in linepower T o display the port power admini strati on and opera tional status, use the show p o rt i nl i nep ower comm and.
2-939 Catalyst 6500 S eries Switch C o mmand Reference —Release 8.1 78-15474-01 Chapter 2 Catalyst 6500 Series Switch an d ROM Monitor Commands show po rt i nli ne power Port Max.Power overcounters absentcounters mWatt mA@42V ----- ------- ----------- --------------- ---------------- 3/1 0 0 0 0 3/2 0 0 0 0 3.
2-940 Catalyst 6500 Series Switch Command Refer e nce—Release 8.1 78-15474-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s sh ow po rt jumb o show port jumbo T o display th e jumbo fram e setting s for all port s with the feat ure enabled, use the show port jumbo comm an d.
2-941 Catalyst 6500 S eries Switch C o mmand Reference —Release 8.1 78-15474-01 Chapter 2 Catalyst 6500 Series Switch an d ROM Monitor Commands show po rt l 2pr otocol-t unn el show port l2 pro tocol-tun nel T o d isplay L ayer 2 pr ot ocol tu nnel ing info rma tion on a po rt o r ra nge o f por ts, u se the show por t l2protocol-tunnel command .
2-942 Catalyst 6500 Series Switch Command Refer e nce—Release 8.1 78-15474-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s show port lacp -channel show port la cp-channel T o display informat ion about LA CP channels by port or module number , use the sho w port lacp-channel comman d.
2-943 Catalyst 6500 S eries Switch C o mmand Reference —Release 8.1 78-15474-01 Chapter 2 Catalyst 6500 Series Switch an d ROM Monitor Commands show po rt l acp -channe l This exam ple sh ows how to.
2-944 Catalyst 6500 Series Switch Command Refer e nce—Release 8.1 78-15474-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s show port lacp -channel This exam ple shows how t.
2-945 Catalyst 6500 S eries Switch C o mmand Reference —Release 8.1 78-15474-01 Chapter 2 Catalyst 6500 Series Switch an d ROM Monitor Commands show po rt mac show port mac T o displa y port MA C counter i nform ation , use the show port mac comma n d.
2-946 Catalyst 6500 Series Switch Command Refer e nce—Release 8.1 78-15474-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s show p ort mac Ta b l e 2 - 7 2 describes the possible fields in th e show po rt ma c comman d outpu t.
2-947 Catalyst 6500 S eries Switch C o mmand Reference —Release 8.1 78-15474-01 Chapter 2 Catalyst 6500 Series Switch an d ROM Monitor Commands show po rt mac -addres s show port mac-add ress T o displa y the MA C address ass ociated with a physic al port or ports, use the show port mac-address comm and.
2-948 Catalyst 6500 Series Switch Command Refer e nce—Release 8.1 78-15474-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s sh ow po rt mac -ad d re ss .
2-949 Catalyst 6500 S eries Switch C o mmand Reference —Release 8.1 78-15474-01 Chapter 2 Catalyst 6500 Series Switch an d ROM Monitor Commands show po rt ne gotiati on show port n egotiation T o di splay the link n egotiat ion pro toco l se ttin g f or t he sp ec ified por t, use t he show port negot iati on comm and.
2-950 Catalyst 6500 Series Switch Command Refer e nce—Release 8.1 78-15474-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s show port p rbs show po rt pr bs T o di splay the.
2-951 Catalyst 6500 S eries Switch C o mmand Reference —Release 8.1 78-15474-01 Chapter 2 Catalyst 6500 Series Switch an d ROM Monitor Commands show po rt pr otocol show port p rotocol T o v iew proto co l filters co nfigured on the E the rChan ne l por ts , use the show port protocol comma nd.
2-952 Catalyst 6500 Series Switch Command Refer e nce—Release 8.1 78-15474-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s show port qo s show po rt qo s T o display QoS-related inform ation, use the show port qos comman d.
2-953 Catalyst 6500 S eries Switch C o mmand Reference —Release 8.1 78-15474-01 Chapter 2 Catalyst 6500 Series Switch an d ROM Monitor Commands show po rt qo s Runtime: Port ACL name Type ----- -------------------------------- ---- No ACL is mapped to port 2/1.
2-954 Catalyst 6500 Series Switch Command Refer e nce—Release 8.1 78-15474-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s show port qo s Config: Port ACL name Type ----- -------------------------------- ---- No ACL is mapped to port 4/1.
2-955 Catalyst 6500 S eries Switch C o mmand Reference —Release 8.1 78-15474-01 Chapter 2 Catalyst 6500 Series Switch an d ROM Monitor Commands show po rt rsvp show port rsvp T o di splay RSVP i nforma ti on on a per- por t basi s, use the show port rsvp co mmand .
2-956 Catalyst 6500 Series Switch Command Refer e nce—Release 8.1 78-15474-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s show po r t se cur ity show port se curity T o vie w port security conf iguration informatio n and statistics, u se the sho w port se curity co mmand.
2-957 Catalyst 6500 S eries Switch C o mmand Reference —Release 8.1 78-15474-01 Chapter 2 Catalyst 6500 Series Switch an d ROM Monitor Commands show po rt s ecu rity Port Secure-Src-Addrs Age-Left L.
2-958 Catalyst 6500 Series Switch Command Refer e nce—Release 8.1 78-15474-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s show po r t se cur ity This e xample shows ho w t.
2-959 Catalyst 6500 S eries Switch C o mmand Reference —Release 8.1 78-15474-01 Chapter 2 Catalyst 6500 Series Switch an d ROM Monitor Commands show po rt s pan tree show port sp antree T o v iew port spa nnin g t ree in for ma tio n, use the show port spantree command.
2-960 Catalyst 6500 Series Switch Command Refer e nce—Release 8.1 78-15474-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s show port sta tus show port st atus T o disp lay port st atus infor mation, us e the show port sta tus co mma nd .
2-961 Catalyst 6500 S eries Switch C o mmand Reference —Release 8.1 78-15474-01 Chapter 2 Catalyst 6500 Series Switch an d ROM Monitor Commands show po rt sync-re start-de lay show port sync-restart-delay T o display a port’ s synchronization restar t delay , use the show port sync -res tart-de lay command .
2-962 Catalyst 6500 Series Switch Command Refer e nce—Release 8.1 78-15474-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s show po r t tdr show port tdr T o display the results of the T ime Domain Reflectometer (TDR) test on a port , use the show port tdr comm and.
2-963 Catalyst 6500 S eries Switch C o mmand Reference —Release 8.1 78-15474-01 Chapter 2 Catalyst 6500 Series Switch an d ROM Monitor Commands show po rt t dr Port Speed Local pair Pair length Remo.
2-964 Catalyst 6500 Series Switch Command Refer e nce—Release 8.1 78-15474-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s show po rt trap show port trap T o disp lay port t rap stat us, use the show port trap comman d. show port trap [ mod [ /port ]] Syntax Descript ion Defaults Thi s command has no de fault setti ngs.
2-965 Catalyst 6500 S eries Switch C o mmand Reference —Release 8.1 78-15474-01 Chapter 2 Catalyst 6500 Series Switch an d ROM Monitor Commands show po rt t runk show port trunk T o display port trunk info rmation, use the sho w port trunk co mm and.
2-966 Catalyst 6500 Series Switch Command Refer e nce—Release 8.1 78-15474-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s show p ort trun k Ta b l e 2 - 7 5 descri bes the f ields in the show port t runk command outpu t.
2-967 Catalyst 6500 S eries Switch C o mmand Reference —Release 8.1 78-15474-01 Chapter 2 Catalyst 6500 Series Switch an d ROM Monitor Commands show po rt un icast-f lood show port unicast-flood T o d isplay the run -time c onfigura tion o f the po rt us ing unic ast floo d b lock ing, us e the show port unicast-flood comm and.
2-968 Catalyst 6500 Series Switch Command Refer e nce—Release 8.1 78-15474-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s show po rt voice show port voice T o display vo ice port informat ion, use the show po rt voi ce co mmand .
2-969 Catalyst 6500 S eries Switch C o mmand Reference —Release 8.1 78-15474-01 Chapter 2 Catalyst 6500 Series Switch an d ROM Monitor Commands show po rt v oic e Port DNS-Server(s) Domain -------- ----------------- ------------------------------------------------- 7/1 dns-sj3.
2-970 Catalyst 6500 Series Switch Command Refer e nce—Release 8.1 78-15474-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s show po rt voice 7/5 10.
2-971 Catalyst 6500 S eries Switch C o mmand Reference —Release 8.1 78-15474-01 Chapter 2 Catalyst 6500 Series Switch an d ROM Monitor Commands show po rt voice ac tive show port vo ice active T o displa y acti ve call inform ation on a port, use the show port voice active co mman d.
2-972 Catalyst 6500 Series Switch Command Refer e nce—Release 8.1 78-15474-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s show por t voice act ive Exam ples T h is ex am p.
2-973 Catalyst 6500 S eries Switch C o mmand Reference —Release 8.1 78-15474-01 Chapter 2 Catalyst 6500 Series Switch an d ROM Monitor Commands show po rt voice ac tive Fax Transmit Duration : 33243.
2-974 Catalyst 6500 Series Switch Command Refer e nce—Release 8.1 78-15474-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s show por t voice act ive Low water playout delay .
2-975 Catalyst 6500 S eries Switch C o mmand Reference —Release 8.1 78-15474-01 Chapter 2 Catalyst 6500 Series Switch an d ROM Monitor Commands show po rt v oic e fdl show port vo ice fdl T o display the faciliti es data link (FDL) s ta tis ti cs for the specifi e d ports, use the show po rt voice f dl comm and.
2-976 Catalyst 6500 Series Switch Command Refer e nce—Release 8.1 78-15474-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s show po rt v o ice f dl Ta b l e 2 - 7 6 descri bes the pos sible fields (d epen ding on th e port ty pe queri ed) in t he s h ow p or t voi ce f dl comm an d o utpu t.
2-977 Catalyst 6500 S eries Switch C o mmand Reference —Release 8.1 78-15474-01 Chapter 2 Catalyst 6500 Series Switch an d ROM Monitor Commands show po rt v oic e interfa ce show port vo ice interf ace T o d i s p l a y t h e port vo ice interface conf iguration, u s e t h e show port v o ice interfac e command.
2-978 Catalyst 6500 Series Switch Command Refer e nce—Release 8.1 78-15474-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s show port vtp show port vtp T o display the status of VLA N T runk Pro tocol (VT P) on a per-port basis, use the show port vtp comm and.
2-979 Catalyst 6500 S eries Switch C o mmand Reference —Release 8.1 78-15474-01 Chapter 2 Catalyst 6500 Series Switch an d ROM Monitor Commands show po rt v tp 3/16 enabled 3/17 enabled 3/18 enabled.
2-980 Catalyst 6500 Series Switch Command Refer e nce—Release 8.1 78-15474-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s show proc show proc T o display CPU, memory allocatio n, and process utilizatio n information, use the show proc command.
2-981 Catalyst 6500 S eries Switch C o mmand Reference —Release 8.1 78-15474-01 Chapter 2 Catalyst 6500 Series Switch an d ROM Monitor Commands show pro c Memory Pool Utilization Memory Pool Type 1M.
2-982 Catalyst 6500 Series Switch Command Refer e nce—Release 8.1 78-15474-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s show proc 44 -2 16 0 16 Backend_Rx 45 -2 16 0 16 .
2-983 Catalyst 6500 S eries Switch C o mmand Reference —Release 8.1 78-15474-01 Chapter 2 Catalyst 6500 Series Switch an d ROM Monitor Commands show pro c 5Min A verage me mory poo l usage o ver the last 5-min ute int erv al. 10Mi n A vera ge m em ory pool usage over the la st 10 -min ute i nterval.
2-984 Catalyst 6500 Series Switch Command Refer e nce—Release 8.1 78-15474-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s show pro tocolfilter show proto colfilter T o list whether protoco l filte r ing is enabled or disab led, use the show pr otoc olfilter com mand.
2-985 Catalyst 6500 S eries Switch C o mmand Reference —Release 8.1 78-15474-01 Chapter 2 Catalyst 6500 Series Switch an d ROM Monitor Commands show pvla n show pvlan T o s how th e co nfigur at ion fo r a given private VLA N, u se t he show pvlan command.
2-986 Catalyst 6500 Series Switch Command Refer e nce—Release 8.1 78-15474-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s show pvlan This e xample shows how to display the.
2-987 Catalyst 6500 S eries Switch C o mmand Reference —Release 8.1 78-15474-01 Chapter 2 Catalyst 6500 Series Switch an d ROM Monitor Commands show pvla n capabi li ty show pvlan capability T o d eterm i ne w he the r or not a por t c an be ma de a p riv ate port, u se the show pvlan capability comm and.
2-988 Catalyst 6500 Series Switch Command Refer e nce—Release 8.1 78-15474-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s show pvlan capability Console> (enable) show pvlan capability 5/3 Ports 5/1 - 5/12 are in the same ASIC range as port 5/3.
2-989 Catalyst 6500 S eries Switch C o mmand Reference —Release 8.1 78-15474-01 Chapter 2 Catalyst 6500 Series Switch an d ROM Monitor Commands show pvla n mappin g show pvlan mappi ng T o s how the private VLAN m appi ng s c onfigure d o n promi sc uous po rts, use t h e show pvlan mapping comm an d.
2-990 Catalyst 6500 Series Switch Command Refer e nce—Release 8.1 78-15474-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s show pvlan mapp ing Relat e d Commands clear co n.
2-991 Catalyst 6500 S eries Switch C o mmand Reference —Release 8.1 78-15474-01 Chapter 2 Catalyst 6500 Series Switch an d ROM Monitor Commands show qo s acl ed it buf fer show qos acl editbuffer T o display A CL names in the edit buf fer , use the show qo s acl editbuffer command.
2-992 Catalyst 6500 Series Switch Command Refer e nce—Release 8.1 78-15474-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s show qos acl info show qos acl in fo T o display QoS A C L information, use the show qos acl info comman d.
2-993 Catalyst 6500 S eries Switch C o mmand Reference —Release 8.1 78-15474-01 Chapter 2 Catalyst 6500 Series Switch an d ROM Monitor Commands show qo s acl info 2. set qos acl ip my_ip_acl trustdscp microflow my-micro aggregate agg tcp 173.22.3.4 255.
2-994 Catalyst 6500 Series Switch Command Refer e nce—Release 8.1 78-15474-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s show qos acl map show qos acl map T o display the ACL mapping inform ation, use the show qos acl map command.
2-995 Catalyst 6500 S eries Switch C o mmand Reference —Release 8.1 78-15474-01 Chapter 2 Catalyst 6500 Series Switch an d ROM Monitor Commands show qo s acl map This e xample shows h ow to display .
2-996 Catalyst 6500 Series Switch Command Refer e nce—Release 8.1 78-15474-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s show qos acl resource- usage show qos acl resou rce-us age T o disp lay ACL ma nage ment in formati on, us e the show qos acl resour ce-usage comm and.
2-997 Catalyst 6500 S eries Switch C o mmand Reference —Release 8.1 78-15474-01 Chapter 2 Catalyst 6500 Series Switch an d ROM Monitor Commands show qo s bri dged-m icroflow -polici ng show qos bridged -microflow-p olicing T o disp lay th e VLAN-bri dged pack et- polic ing st atus, u se the sho w qos bridged-packet -policing comm and.
2-998 Catalyst 6500 Series Switch Command Refer e nce—Release 8.1 78-15474-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s show qos info show qos info T o display QoS-related inf ormation for a specif ied port, use the sho w qos i nf o com mand.
2-999 Catalyst 6500 S eries Switch C o mmand Reference —Release 8.1 78-15474-01 Chapter 2 Catalyst 6500 Series Switch an d ROM Monitor Commands show qo s info The num ber pr eceding the p lette r in the port_type valu e (for ex ample, 1p2q2t and 1p1q4t ) determines the threshold in the prio rity queue.
2-1000 Catalyst 6500 Series Switch Command Refer e nce—Release 8.1 78-15474-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s show qos info This exam ple sh ows how to displ .
2-1001 Catalyst 6500 S eries Switch C o mmand Reference —Release 8.1 78-15474-01 Chapter 2 Catalyst 6500 Series Switch an d ROM Monitor Commands show qo s info This exam ple sh ows anothe r di splay.
2-1002 Catalyst 6500 Series Switch Command Refer e nce—Release 8.1 78-15474-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s show qos info This exam ple shows how to di spla.
2-1003 Catalyst 6500 S eries Switch C o mmand Reference —Release 8.1 78-15474-01 Chapter 2 Catalyst 6500 Series Switch an d ROM Monitor Commands show qo s info This exam ple shows anothe r di sp lay.
2-1004 Catalyst 6500 Series Switch Command Refer e nce—Release 8.1 78-15474-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s show qos mac-cos show qos mac-cos T o display the cu r rently conf igured QoS-related in formation fo r the MA C address and VLAN pair , use the show qos mac-cos command .
2-1005 Catalyst 6500 S eries Switch C o mmand Reference —Release 8.1 78-15474-01 Chapter 2 Catalyst 6500 Series Switch an d ROM Monitor Commands show qo s mac-cos Relat e d Commands clea r q o s m a.
2-1006 Catalyst 6500 Series Switch Command Refer e nce—Release 8.1 78-15474-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s show qos map s show qos maps T o d isplay the mappi ng o f d ifferent ma ps, use the show qos maps command.
2-1007 Catalyst 6500 S eries Switch C o mmand Reference —Release 8.1 78-15474-01 Chapter 2 Catalyst 6500 Series Switch an d ROM Monitor Commands show qo s maps Exam ples Th is exampl e sh ows how to displa y the co s-dscp- map ma p: Console> show qos maps cos-dscp-map CoS - DSCP map: CoS DSCP --- --------------- 0 10 .
2-1008 Catalyst 6500 Series Switch Command Refer e nce—Release 8.1 78-15474-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s show qos map s DSCP - CoS map: DSCP CoS --------------- ---- 34-40,60 0 .
2-1009 Catalyst 6500 S eries Switch C o mmand Reference —Release 8.1 78-15474-01 Chapter 2 Catalyst 6500 Series Switch an d ROM Monitor Commands show qo s policer show qos poli cer T o displ ay micr oflow or a ggreg ate pol icers cu rrentl y conf igured, use the show qos policer comm and.
2-1010 Catalyst 6500 Series Switch Command Refer e nce—Release 8.1 78-15474-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s show qos p olicer This exam ple sh ows how to di.
2-1011 Catalyst 6500 S eries Switch C o mmand Reference —Release 8.1 78-15474-01 Chapter 2 Catalyst 6500 Series Switch an d ROM Monitor Commands show qo s policy -source show qos policy-source T o d isplay the QoS po licy sour ce i nfor ma tion, use th e show qos policy-source comman d.
2-1012 Catalyst 6500 Series Switch Command Refer e nce—Release 8.1 78-15474-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s show qos rsvp show qos rsvp T o display RSVP information, use the show qos r svp command. show qos rsvp { info | flo w-inf o } Syntax Descript ion Defaults Thi s command has no de fault setti ngs.
2-1013 Catalyst 6500 S eries Switch C o mmand Reference —Release 8.1 78-15474-01 Chapter 2 Catalyst 6500 Series Switch an d ROM Monitor Commands show qo s statist ics show qos statistics T o displa y the var ious Qo S-related counters for a speci fied por t, use the sh ow qos s tatis tic s co mmand .
2-1014 Catalyst 6500 Series Switch Command Refer e nce—Release 8.1 78-15474-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s show qos stati stics This e xample shows ho w to display the QoS Layer 3 statistics: Console> show qos statistics l3stats Warning: QoS is disabled.
2-1015 Catalyst 6500 S eries Switch C o mmand Reference —Release 8.1 78-15474-01 Chapter 2 Catalyst 6500 Series Switch an d ROM Monitor Commands show qo s statist ics export info show qos statistics export info T o displa y QoS data export configurati on and stati stical informat ion, use t he show qos st atistics export inf o comman d.
2-1016 Catalyst 6500 Series Switch Command Refer e nce—Release 8.1 78-15474-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s show qos stat us show qos status T o d i sp l ay if QoS is enabled on the switch, u s e t he show qo s status comm and.
2-1017 Catalyst 6500 S eries Switch C o mmand Reference —Release 8.1 78-15474-01 Chapter 2 Catalyst 6500 Series Switch an d ROM Monitor Commands show radi us show radius T o disp lay conf igured RAD IUS parame ters, use the show radius comma n d. show radi us [ noalias ] Syntax D escr i pti on Defaults Thi s command has no de fault setti ngs.
2-1018 Catalyst 6500 Series Switch Command Refer e nce—Release 8.1 78-15474-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s show radius Relat e d Commands set radius attrib.
2-1019 Catalyst 6500 S eries Switch C o mmand Reference —Release 8.1 78-15474-01 Chapter 2 Catalyst 6500 Series Switch an d ROM Monitor Commands show rate-l im it show rate-limit T o display rate-limiter settings and information , use the show rate-limit comma nd.
2-1020 Catalyst 6500 Series Switch Command Refer e nce—Release 8.1 78-15474-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s show rc p show rcp T o display rcp informatio n, use the sho w r cp command . show r cp Syntax Descript ion This c omm and ha s no keywords or argume nts.
2-1021 Catalyst 6500 S eries Switch C o mmand Reference —Release 8.1 78-15474-01 Chapter 2 Catalyst 6500 Series Switch an d ROM Monitor Commands show reset show reset T o display scheduled reset informa tion, use the show r eset command. show r eset Syntax D escr i pti on This comm a nd ha s n o keywords or argume nts.
2-1022 Catalyst 6500 Series Switch Command Refer e nce—Release 8.1 78-15474-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s show rgmp group show rgmp group T o display all multicast grou ps or th e count of multicast g roups that are joined b y RGMP-capable router s, use the show rgmp group command .
2-1023 Catalyst 6500 S eries Switch C o mmand Reference —Release 8.1 78-15474-01 Chapter 2 Catalyst 6500 Series Switch an d ROM Monitor Commands show rgm p stat is ti cs show rgmp statistics T o displa y all the RGMP-rel ated statis tics for a gi ven VLAN, use the show rgmp statistics command.
2-1024 Catalyst 6500 Series Switch Command Refer e nce—Release 8.1 78-15474-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s sho w rs pan show rspan T o display the remote SP AN configura tion, use the show rspan comman d. show rspan Syntax Descript ion This c omm and ha s no keywords or argume nts.
2-1025 Catalyst 6500 S eries Switch C o mmand Reference —Release 8.1 78-15474-01 Chapter 2 Catalyst 6500 Series Switch an d ROM Monitor Commands show rspan Destination : Port 6/1 Rspan Vlan : 906 Ad.
2-1026 Catalyst 6500 Series Switch Command Refer e nce—Release 8.1 78-15474-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s show runni ng-conf ig show running-con fig T o d.
2-1027 Catalyst 6500 S eries Switch C o mmand Reference —Release 8.1 78-15474-01 Chapter 2 Catalyst 6500 Series Switch an d ROM Monitor Commands show run ni ng-conf ig # ***** NON-DEFAULT CONFIGURATION ***** ! ! #time: Mon Jun 11 2001, 08:22:17 ! #version 6.
2-1028 Catalyst 6500 Series Switch Command Refer e nce—Release 8.1 78-15474-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s show runni ng-conf ig set vlan 11 3/2 ! #module .
2-1029 Catalyst 6500 S eries Switch C o mmand Reference —Release 8.1 78-15474-01 Chapter 2 Catalyst 6500 Series Switch an d ROM Monitor Commands show s ecur ity ac l show security acl T o displa y the conte nts of the VACL that are c u rrently c o nfigured or last c o mmitted t o NVRAM an d hardwa re, use th e show security acl comman d.
2-1030 Catalyst 6500 Series Switch Command Refer e nce—Release 8.1 78-15474-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s show secu rity acl This e xample shows h ow to d.
2-1031 Catalyst 6500 S eries Switch C o mmand Reference —Release 8.1 78-15474-01 Chapter 2 Catalyst 6500 Series Switch an d ROM Monitor Commands show s ecur ity ac l set security acl ip ip1 --------------------------------------------------- arp permit 1.
2-1032 Catalyst 6500 Series Switch Command Refer e nce—Release 8.1 78-15474-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s show security acl arp-inspection show security a.
2-1033 Catalyst 6500 S eries Switch C o mmand Reference —Release 8.1 78-15474-01 Chapter 2 Catalyst 6500 Series Switch an d ROM Monitor Commands show s ecur ity acl ca pture-p ort s show security acl c apture-ports T o display the c apture port list , use the show s ecurity acl ca pture- ports co mmand.
2-1034 Catalyst 6500 Series Switch Command Refer e nce—Release 8.1 78-15474-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s show security acl feature ratelimit show securit.
2-1035 Catalyst 6500 S eries Switch C o mmand Reference —Release 8.1 78-15474-01 Chapter 2 Catalyst 6500 Series Switch an d ROM Monitor Commands show s ecur ity ac l l og show security acl lo g T o d isplay V A C L log i n forma tio n, use the show security acl log comma nd.
2-1036 Catalyst 6500 Series Switch Command Refer e nce—Release 8.1 78-15474-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s show security acl log Defaults Thi s command has no de fault setti ngs. Comma nd T ypes Swit ch co mman d.
2-1037 Catalyst 6500 S eries Switch C o mmand Reference —Release 8.1 78-15474-01 Chapter 2 Catalyst 6500 Series Switch an d ROM Monitor Commands show s ecur ity ac l l og reas sembly- timeo ut, redi.
2-1038 Catalyst 6500 Series Switch Command Refer e nce—Release 8.1 78-15474-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s show security acl map show security acl map T o display VACL-to-V LAN mapping for a spe cified VACL or VLAN, use the show security acl map comm and.
2-1039 Catalyst 6500 S eries Switch C o mmand Reference —Release 8.1 78-15474-01 Chapter 2 Catalyst 6500 Series Switch an d ROM Monitor Commands show s ecur ity ac l re source -usage show security acl resou rce-us age T o disp lay VACL ma nagement infor matio n, use the sh ow securit y acl resour ce-usage co mmand.
2-1040 Catalyst 6500 Series Switch Command Refer e nce—Release 8.1 78-15474-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s show snmp show snmp T o display SNMP informat ion, use the show snmp command . show snmp [ no alias ] Syntax Descript ion Defaults Thi s command has no de fault setti ngs.
2-1041 Catalyst 6500 S eries Switch C o mmand Reference —Release 8.1 78-15474-01 Chapter 2 Catalyst 6500 Series Switch an d ROM Monitor Commands show snm p Chassis Alias:my chassis Traps Enabled: No.
Chapter 2 Ca talyst 6 500 Series Swi tch and ROM M onitor Comm ands show snmp access 2-1042 Catalyst 6500 Series Switch Command Refer e nce—Release 8.1 78-15474-01 22 show snmp a ccess T o displa y SNMP access inf ormation, use the show snmp access command .
2-1043 Catalyst 6500 S eries Switch C o mmand Reference —Release 8.1 78-15474-01 Chapter 2 Catalyst 6500 Series Switch an d ROM Monitor Commands show snm p ac cess • V ersion 2 (SNMPv2c)—The seco nd release of SNMP , d escribed in RFC 1902, has additions and enhanc emen ts to dat a types, co unter si ze, and pro tocol operati ons.
2-1044 Catalyst 6500 Series Switch Command Refer e nce—Release 8.1 78-15474-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s show snmp access- list show snmp access-list T o disp lay SNMP a ccess li st numbe rs and co rresp onding I P addre sses and I P masks , use the show snmp access-list command.
2-1045 Catalyst 6500 S eries Switch C o mmand Reference —Release 8.1 78-15474-01 Chapter 2 Catalyst 6500 Series Switch an d ROM Monitor Commands show snm p bu ffer show snmp buffer T o disp lay th e number of SNMP pack ets which ca n be sav ed in the SNMP UDP so cket recei ve b uffe r , use the show snmp b uffer comm an d.
2-1046 Catalyst 6500 Series Switch Command Refer e nce—Release 8.1 78-15474-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s show snmp community show snmp community T o display SNMP conte xt information, use the show snmp community comman d.
2-1047 Catalyst 6500 S eries Switch C o mmand Reference —Release 8.1 78-15474-01 Chapter 2 Catalyst 6500 Series Switch an d ROM Monitor Commands show snmp community This exam ple sh ows the d ispl a.
2-1048 Catalyst 6500 Series Switch Command Refer e nce—Release 8.1 78-15474-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s show snmp cont ext show snmp c ontext T o display SNMP conte xt information, use the show snmp context comm and.
2-1049 Catalyst 6500 S eries Switch C o mmand Reference —Release 8.1 78-15474-01 Chapter 2 Catalyst 6500 Series Switch an d ROM Monitor Commands show snm p co unters show snmp c ounters T o display SNMP counter info rmation, use the sho w snmp counters com mand.
2-1050 Catalyst 6500 Series Switch Command Refer e nce—Release 8.1 78-15474-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s show s n mp coun ters snmpInASNParseErrs = 0 snm.
2-1051 Catalyst 6500 S eries Switch C o mmand Reference —Release 8.1 78-15474-01 Chapter 2 Catalyst 6500 Series Switch an d ROM Monitor Commands show snm p co unters snmpInT o talReqV ars Number o f MIB objects retriev ed successfu lly by the SNMP prot ocol entit y as the resul t of re cei ving v alid S NMP Get-Reque st and Get- Next PDUs.
2-1052 Catalyst 6500 Series Switch Command Refer e nce—Release 8.1 78-15474-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s show s n mp coun ters snmpInT raps Number o f SNMP T rap PD Us acce pted an d proc essed by the SNMP protoc ol entit y .
2-1053 Catalyst 6500 S eries Switch C o mmand Reference —Release 8.1 78-15474-01 Chapter 2 Catalyst 6500 Series Switch an d ROM Monitor Commands show snm p en ginei d show snmp e ngineid T o display the SNMP local engine ID, use the show snmp engineid comman d.
2-1054 Catalyst 6500 Series Switch Command Refer e nce—Release 8.1 78-15474-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s show snm p gr oup show snmp group T o display the name of the SNMP group or collec tion of users wh o hav e a common ac cess policy , use the show snmp g roup command .
2-1055 Catalyst 6500 S eries Switch C o mmand Reference —Release 8.1 78-15474-01 Chapter 2 Catalyst 6500 Series Switch an d ROM Monitor Commands show snm p gr oup The SNMP func tionality o n the Cata lyst enterp rise LAN switc hes for SNMP v 1 and SNMP v 2c remain s intact; ho we ver , the functionality has great ly expande d for SNMPv3.
2-1056 Catalyst 6500 Series Switch Command Refer e nce—Release 8.1 78-15474-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s show snmp ifalias show snmp ifalias T o display SNMP interfa ce aliases, use the show snmp ifalias co mmand.
2-1057 Catalyst 6500 S eries Switch C o mmand Reference —Release 8.1 78-15474-01 Chapter 2 Catalyst 6500 Series Switch an d ROM Monitor Commands show snm p no tify show snmp notify T o display the snmpNotify T able conf iguration, use th e sho w snm p noti fy command .
2-1058 Catalyst 6500 Series Switch Command Refer e nce—Release 8.1 78-15474-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s show snmp notify Ta b l e 2 - 8 3 descri bes the f ields in the show snmp notify command outpu t.
2-1059 Catalyst 6500 S eries Switch C o mmand Reference —Release 8.1 78-15474-01 Chapter 2 Catalyst 6500 Series Switch an d ROM Monitor Commands show snmp rmonmemory show snmp rmonmemory T o display the memory usag e limit in percenta ge, use the show snmp rmonmemory comma nd.
2-1060 Catalyst 6500 Series Switch Command Refer e nce—Release 8.1 78-15474-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s show snmp target addr show snmp ta rgetadd r T o display the SNMP tar get address entries in the snmpT argetAddr essT able, use the show snmp targetaddr co mmand .
2-1061 Catalyst 6500 S eries Switch C o mmand Reference —Release 8.1 78-15474-01 Chapter 2 Catalyst 6500 Series Switch an d ROM Monitor Commands show snm p t argeta ddr Ta b l e 2 - 8 4 descr ibes the f ields in the show snmp targetaddr command ou tput .
2-1062 Catalyst 6500 Series Switch Command Refer e nce—Release 8.1 78-15474-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s show sn mp target para ms show snmp ta rgetparam.
2-1063 Catalyst 6500 S eries Switch C o mmand Reference —Release 8.1 78-15474-01 Chapter 2 Catalyst 6500 Series Switch an d ROM Monitor Commands show snmp targetparams Ta b l e 2 - 8 5 descr ibes the f ields in the show snmp tar getparams comma nd output.
2-1064 Catalyst 6500 Series Switch Command Refer e nce—Release 8.1 78-15474-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s show s n mp user show snmp user T o displa y SNMP information fo r a specif ic user , use the show snmp user comm and.
2-1065 Catalyst 6500 S eries Switch C o mmand Reference —Release 8.1 78-15474-01 Chapter 2 Catalyst 6500 Series Switch an d ROM Monitor Commands show snm p us er Ta b l e 2 - 8 6 descr ibes the f ields in the show snmp user comma nd output.
2-1066 Catalyst 6500 Series Switch Command Refer e nce—Release 8.1 78-15474-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s show snmp view show snmp view T o disp lay th e SNMP MIB vi ew conf igurat ion, u se the show snmp view comman d.
2-1067 Catalyst 6500 S eries Switch C o mmand Reference —Release 8.1 78-15474-01 Chapter 2 Catalyst 6500 Series Switch an d ROM Monitor Commands show sn mp vie w Ta b l e 2 - 8 7 descr ibes the f ields in the show snmp view command ou tput.
2-1068 Catalyst 6500 Series Switch Command Refer e nce—Release 8.1 78-15474-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s show span show span T o display informat ion about the curren t SP AN conf iguration, use th e show span comm and.
2-1069 Catalyst 6500 S eries Switch C o mmand Reference —Release 8.1 78-15474-01 Chapter 2 Catalyst 6500 Series Switch an d ROM Monitor Commands show span Relat e d Commands clear co nfi g set spantree root Multicast Status of whether monitoring m ulticast t raff ic is ena bled or d isabled.
2-1070 Catalyst 6500 Series Switch Command Refer e nce—Release 8.1 78-15474-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s show spantr ee show spantree T o displ ay span ning tree i nform ation fo r a VLAN or p ort, use t he show spantree comm and.
2-1071 Catalyst 6500 S eries Switch C o mmand Reference —Release 8.1 78-15474-01 Chapter 2 Catalyst 6500 Series Switch an d ROM Monitor Commands show spant ree Exam ples This example (while in PVST+.
2-1072 Catalyst 6500 Series Switch Command Refer e nce—Release 8.1 78-15474-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s show spantr ee Port State Role Cost Prio Type --.
2-1073 Catalyst 6500 S eries Switch C o mmand Reference —Release 8.1 78-15474-01 Chapter 2 Catalyst 6500 Series Switch an d ROM Monitor Commands show spant ree Relat e d Commands show spantr ee back.
2-1074 Catalyst 6500 Series Switch Command Refer e nce—Release 8.1 78-15474-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s show spant ree backb onefast show spantree ba ckbonefa st T o disp lay whether the sp anning tre e BackboneF ast Con verg ence featur e is enabl ed, use the show spantree backbonefast com m and.
2-1075 Catalyst 6500 S eries Switch C o mmand Reference —Release 8.1 78-15474-01 Chapter 2 Catalyst 6500 Series Switch an d ROM Monitor Commands show spant ree blo cke dports show spantree bl ockedports T o di splay o nly the bloc ked por t s o n a p er-VLAN or per-instanc e ba sis, use th e show spantree blockedports co mmand .
2-1076 Catalyst 6500 Series Switch Command Refer e nce—Release 8.1 78-15474-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s show spantree bpdu-filter show spantree bpdu-filter T o display information ab out BPDU filtering , use the show spantree bpdu-f ilter command.
2-1077 Catalyst 6500 S eries Switch C o mmand Reference —Release 8.1 78-15474-01 Chapter 2 Catalyst 6500 Series Switch an d ROM Monitor Commands show spant ree bpd u-guard show spantree bp du-guard T o display informat ion about BPDU guard, use the show spantr ee bpdu-guard comman d.
2-1078 Catalyst 6500 Series Switch Command Refer e nce—Release 8.1 78-15474-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s show spantr ee bpdu-ske wing show spantree bp du-skewing T o display BPDU ske wing detection status, use the show spantree bpdu-skewing comm an d.
2-1079 Catalyst 6500 S eries Switch C o mmand Reference —Release 8.1 78-15474-01 Chapter 2 Catalyst 6500 Series Switch an d ROM Monitor Commands show spant ree bpd u-skewi ng .
2-1080 Catalyst 6500 Series Switch Command Refer e nce—Release 8.1 78-15474-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s show spantree conflicts show spantree conflicts .
2-1081 Catalyst 6500 S eries Switch C o mmand Reference —Release 8.1 78-15474-01 Chapter 2 Catalyst 6500 Series Switch an d ROM Monitor Commands show spant ree con flicts This e xample shows th e ou.
2-1082 Catalyst 6500 Series Switch Command Refer e nce—Release 8.1 78-15474-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s show sp a ntree defaultcostmode show spantree de faultcostmode T o display the current def ault port cost m o de, use the show span tree default costmode co mmand.
2-1083 Catalyst 6500 S eries Switch C o mmand Reference —Release 8.1 78-15474-01 Chapter 2 Catalyst 6500 Series Switch an d ROM Monitor Commands show spant ree gua rd show spantree gu ard T o display spanning t ree guard inf ormatio n for the VLANs or i nstances on a po rt, use the show s pantr ee guard com mand .
2-1084 Catalyst 6500 Series Switch Command Refer e nce—Release 8.1 78-15474-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s show spantr ee guard Exam ples Th is exampl e sh.
2-1085 Catalyst 6500 S eries Switch C o mmand Reference —Release 8.1 78-15474-01 Chapter 2 Catalyst 6500 Series Switch an d ROM Monitor Commands show spant ree mapp ing show spantree mappi ng T o display VLAN and instan ce mapping informa tion, use the show spantree mapping .
2-1086 Catalyst 6500 Series Switch Command Refer e nce—Release 8.1 78-15474-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s sh ow spantree mappi ng This e xample shows h ow.
2-1087 Catalyst 6500 S eries Switch C o mmand Reference —Release 8.1 78-15474-01 Chapter 2 Catalyst 6500 Series Switch an d ROM Monitor Commands show s pant ree mis tp -instanc e show spantree mistp-instan ce T o display instance infor m ation, use the show spantree mistp-instance command.
2-1088 Catalyst 6500 Series Switch Command Refer e nce—Release 8.1 78-15474-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s show spantree mistp-instance Ta b l e 2 - 9 2 de.
2-1089 Catalyst 6500 S eries Switch C o mmand Reference —Release 8.1 78-15474-01 Chapter 2 Catalyst 6500 Series Switch an d ROM Monitor Commands show spant ree mst show spantree mst T o display MST informa tion, use the show spantree mst comm and.
2-1090 Catalyst 6500 Series Switch Command Refer e nce—Release 8.1 78-15474-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s sh ow s pan tr ee m st This e xample shows h ow .
2-1091 Catalyst 6500 S eries Switch C o mmand Reference —Release 8.1 78-15474-01 Chapter 2 Catalyst 6500 Series Switch an d ROM Monitor Commands show spant ree mst con fig show spantree mst conf ig .
2-1092 Catalyst 6500 Series Switch Command Refer e nce—Release 8.1 78-15474-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s show spantree mst config 7 301-400 8 - 9 - 10 - .
2-1093 Catalyst 6500 S eries Switch C o mmand Reference —Release 8.1 78-15474-01 Chapter 2 Catalyst 6500 Series Switch an d ROM Monitor Commands show spant ree port fa st show spantree po rtfast T o di splay Port Fast infor ma tion, use th e show spantree portfast comman d.
2-1094 Catalyst 6500 Series Switch Command Refer e nce—Release 8.1 78-15474-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s sh ow spantree porti nstancecost show spantree po rtinstanc ecost T o sho w the path cost fo r the inst ances on a port , use the show spantree portinstancecost co mman d.
2-1095 Catalyst 6500 S eries Switch C o mmand Reference —Release 8.1 78-15474-01 Chapter 2 Catalyst 6500 Series Switch an d ROM Monitor Commands show spant ree port v lancost show spantree po rtvlanco st T o sho w the path cost for the VLANs or e xtended-range VLANs, use the show spantree portvl ancost comm and.
2-1096 Catalyst 6500 Series Switch Command Refer e nce—Release 8.1 78-15474-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s show spantree statistics show spantree sta tistics T o sho w spanning tree statistica l information, us e the show spantree statistics comman d.
2-1097 Catalyst 6500 S eries Switch C o mmand Reference —Release 8.1 78-15474-01 Chapter 2 Catalyst 6500 Series Switch an d ROM Monitor Commands show s pant ree stat istics message age (port/VLAN) 0.
2-1098 Catalyst 6500 Series Switch Command Refer e nce—Release 8.1 78-15474-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s show spantree statistics This e xample sho ws ho.
2-1099 Catalyst 6500 S eries Switch C o mmand Reference —Release 8.1 78-15474-01 Chapter 2 Catalyst 6500 Series Switch an d ROM Monitor Commands show s pant ree stat istics num of similar bpdus to p.
2-1100 Catalyst 6500 Series Switch Command Refer e nce—Release 8.1 78-15474-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s show spantree statistics bridge forward delay 15.
2-1101 Catalyst 6500 S eries Switch C o mmand Reference —Release 8.1 78-15474-01 Chapter 2 Catalyst 6500 Series Switch an d ROM Monitor Commands show s pant ree stat istics desig nated_ bridge B ridge i denti fier of the bridge assumed to be t he design ated bridge f or t he LAN associ ated wi th the port.
2-1102 Catalyst 6500 Series Switch Command Refer e nce—Release 8.1 78-15474-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s show spantree statistics VLAN- based infor matio n and st ati stics span ningtr ee type T ype of spanning t ree (IEE E, IBM , CISCO).
2-1103 Catalyst 6500 S eries Switch C o mmand Reference —Release 8.1 78-15474-01 Chapter 2 Catalyst 6500 Series Switch an d ROM Monitor Commands show s pant ree stat istics Relat e d Commands clear s pantr ee statistics show spantr ee curr_sr c_mac Sour ce MA C ad dr es s o f th e co nf igured BP DU re ceiv ed on a pa rticular p o rt.
2-1104 Catalyst 6500 Series Switch Command Refer e nce—Release 8.1 78-15474-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s show sp a ntree summa r y show spantree su mmary T o d isplay a summ ar y of spanni ng tr ee i nfo rma tio n, use t he show spantree summary comman d.
2-1105 Catalyst 6500 S eries Switch C o mmand Reference —Release 8.1 78-15474-01 Chapter 2 Catalyst 6500 Series Switch an d ROM Monitor Commands show s pant ree sum m ary This exam ple shows how to .
2-1106 Catalyst 6500 Series Switch Command Refer e nce—Release 8.1 78-15474-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s show sp a ntree summa r y This exam ple sh ows h.
2-1107 Catalyst 6500 S eries Switch C o mmand Reference —Release 8.1 78-15474-01 Chapter 2 Catalyst 6500 Series Switch an d ROM Monitor Commands show spant ree upl in kfast show spantree up linkfast T o sho w the UplinkFa st feature settings, use the show spantr ee uplinkfast comm and.
2-1108 Catalyst 6500 Series Switch Command Refer e nce—Release 8.1 78-15474-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s show spantree up linkfast This e xample sho ws h.
2-1109 Catalyst 6500 S eries Switch C o mmand Reference —Release 8.1 78-15474-01 Chapter 2 Catalyst 6500 Series Switch an d ROM Monitor Commands show star tup-co nfi g show startu p-config T o display the startup conf iguration f ile contained in NVRAM or specified by the CONFIG_FILE en vironm ent va riable, use the sho w startup-config co mmand.
2-1110 Catalyst 6500 Series Switch Command Refer e nce—Release 8.1 78-15474-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s show start up-config #vtp set vtp domain dan set.
2-1111 Catalyst 6500 S eries Switch C o mmand Reference —Release 8.1 78-15474-01 Chapter 2 Catalyst 6500 Series Switch an d ROM Monitor Commands show star tup-co nfi g #module 8 empty ! #module 9 em.
2-1112 Catalyst 6500 Series Switch Command Refer e nce—Release 8.1 78-15474-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s show summertime show summertime T o disp lay th e current st atus of the summert ime feat ure, use the show summert ime comm and.
2-1113 Catalyst 6500 S eries Switch C o mmand Reference —Release 8.1 78-15474-01 Chapter 2 Catalyst 6500 Series Switch an d ROM Monitor Commands show sy stem show system T o display system information, use the sho w system command. show system Syntax D escr i pti on This comm a nd ha s n o keywords or argume nts.
2-1114 Catalyst 6500 Series Switch Command Refer e nce—Release 8.1 78-15474-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s show system Core Dump Core File ----------------.
2-1115 Catalyst 6500 S eries Switch C o mmand Reference —Release 8.1 78-15474-01 Chapter 2 Catalyst 6500 Series Switch an d ROM Monitor Commands show sy stem Core Dump Core File --------------------.
2-1116 Catalyst 6500 Series Switch Command Refer e nce—Release 8.1 78-15474-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s show system Relat e d Commands set system ba ud .
2-1117 Catalyst 6500 S eries Switch C o mmand Reference —Release 8.1 78-15474-01 Chapter 2 Catalyst 6500 Series Switch an d ROM Monitor Commands show sys te m highav ai lability show system hi ghava ilability T o display the system high-a va ilability configur ation settings, use the show system highavailabil i ty comm an d.
2-1118 Catalyst 6500 Series Switch Command Refer e nce—Release 8.1 78-15474-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s show system info-log show system info-log T o display the confi guration of the system information logging feature, use the sho w s ystem info-log comm and.
2-1119 Catalyst 6500 S eries Switch C o mmand Reference —Release 8.1 78-15474-01 Chapter 2 Catalyst 6500 Series Switch an d ROM Monitor Commands show sys te m superv is or- update show system superv.
2-1120 Catalyst 6500 Series Switch Command Refer e nce—Release 8.1 78-15474-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s show system switchmode show system switchmode T o display the system switching mode setting, use the show system swit chmode comma nd.
2-1121 Catalyst 6500 S eries Switch C o mmand Reference —Release 8.1 78-15474-01 Chapter 2 Catalyst 6500 Series Switch an d ROM Monitor Commands show tacac s show tacacs T o di splay the T ACA CS+ pr otoc ol c on figuration, use th e show ta cacs comm and.
2-1122 Catalyst 6500 Series Switch Command Refer e nce—Release 8.1 78-15474-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s show tacacs Relat e d Commands set tac acs a tte.
2-1123 Catalyst 6500 S eries Switch C o mmand Reference —Release 8.1 78-15474-01 Chapter 2 Catalyst 6500 Series Switch an d ROM Monitor Commands show te ch- suppor t show tech-supp ort T o di splay .
2-1124 Catalyst 6500 Series Switch Command Refer e nce—Release 8.1 78-15474-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s show tech-su pport If you spe cify the config ke.
2-1125 Catalyst 6500 S eries Switch C o mmand Reference —Release 8.1 78-15474-01 Chapter 2 Catalyst 6500 Series Switch an d ROM Monitor Commands show te ch- suppor t • show system • show spantr .
Chapter 2 Ca talyst 6 500 Series Swi tch and ROM M onitor Comm ands show test 2-1126 Catalyst 6500 Series Switch Command Refer e nce—Release 8.1 78-15474-01 222 show test T o display the errors r ep.
2-1127 Catalyst 6500 S eries Switch C o mmand Reference —Release 8.1 78-15474-01 Chapter 2 Catalyst 6500 Series Switch an d ROM Monitor Commands show te st DontLearnTest: . ConditionalLearnTest: . BadBpduTest: . TrapTest: . Loopback Status [Reported by Module 2] : Ports 1 2 ----------- .
2-1128 Catalyst 6500 Series Switch Command Refer e nce—Release 8.1 78-15474-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s show test This e xample shows the di splay if you do not specify a module: Console> show test Environmental Status (.
2-1129 Catalyst 6500 S eries Switch C o mmand Reference —Release 8.1 78-15474-01 Chapter 2 Catalyst 6500 Series Switch an d ROM Monitor Commands show te st Ta b l e 2 - 9 7 descri bes th e po ssible fields in the show test c om mand ou tput . The fields shown depend on the m odule ty pe qu er ied.
2-1130 Catalyst 6500 Series Switch Command Refer e nce—Release 8.1 78-15474-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s show test Relat e d Commands set tes t di agfa il- ac tion set test dia glevel DPRAM T est results for the dual-po rt RAM.
2-1131 Catalyst 6500 S eries Switch C o mmand Reference —Release 8.1 78-15474-01 Chapter 2 Catalyst 6500 Series Switch an d ROM Monitor Commands show time show time T o display the curren t time of day in the system clo ck, use the show time command.
2-1132 Catalyst 6500 Series Switch Command Refer e nce—Release 8.1 78-15474-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s sho w t imezo ne show timezone T o disp lay th e curr ent time zone and o ff set, us e the show ti mezone comman d.
2-1133 Catalyst 6500 S eries Switch C o mmand Reference —Release 8.1 78-15474-01 Chapter 2 Catalyst 6500 Series Switch an d ROM Monitor Commands show top show top T o start the T opN proces s, use the show top command .
2-1134 Catalyst 6500 Series Switch Command Refer e nce—Release 8.1 78-15474-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s show top Usage Guid el i nes Y ou can ter minat e T opN pro cesses wi th the background option spec ified only by using the clea r top [ r e port_num ] comman d.
2-1135 Catalyst 6500 S eries Switch C o mmand Reference —Release 8.1 78-15474-01 Chapter 2 Catalyst 6500 Series Switch an d ROM Monitor Commands show top rep ort show top re port T o list all T opN processes and specif ic T opN reports, use the show top r eport comm and.
2-1136 Catalyst 6500 Series Switch Command Refer e nce—Release 8.1 78-15474-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s show top r eport This exampl e shows ho w to dis.
2-1137 Catalyst 6500 S eries Switch C o mmand Reference —Release 8.1 78-15474-01 Chapter 2 Catalyst 6500 Series Switch an d ROM Monitor Commands show traff i c show traffic T o displa y traff ic and peak inform ation, use the show traffic comma nd. show traffic Syntax D escr i pti on This comm a nd ha s n o keywords or argume nts.
2-1138 Catalyst 6500 Series Switch Command Refer e nce—Release 8.1 78-15474-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s sho w tr unk show trunk T o display trunking informati on for the switch, use the show trunk comm an d.
2-1139 Catalyst 6500 S eries Switch C o mmand Reference —Release 8.1 78-15474-01 Chapter 2 Catalyst 6500 Series Switch an d ROM Monitor Commands show trunk Exam ples Th is example sh ows how to disp.
2-1140 Catalyst 6500 Series Switch Command Refer e nce—Release 8.1 78-15474-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s sho w tr unk Port Vlans allowed and active in ma.
2-1141 Catalyst 6500 S eries Switch C o mmand Reference —Release 8.1 78-15474-01 Chapter 2 Catalyst 6500 Series Switch an d ROM Monitor Commands show ud ld show udld T o display UDLD informatio n, use the show udld co mmand. show udl d show udl d port [ mod [ /port ]] Syntax D escr i pti on Defaults Thi s command has no de fault setti ngs.
2-1142 Catalyst 6500 Series Switch Command Refer e nce—Release 8.1 78-15474-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s sh ow ud ld Ta b l e 2 - 9 9 descri bes the f ields in the show udl d comman d outpu t.
2-1143 Catalyst 6500 S eries Switch C o mmand Reference —Release 8.1 78-15474-01 Chapter 2 Catalyst 6500 Series Switch an d ROM Monitor Commands show users show us ers T o show if the console por t is acti ve and to list all acti ve T elnet sessions with th e IP address or IP alias of the originatin g host, use the show use rs comma nd.
Chapter 2 Ca talyst 6 500 Series Swi tch and ROM M onitor Comm ands show version 2-1144 Catalyst 6500 Series Switch Command Refer e nce—Release 8.1 78-15474-01 22 show version T o display so ftware, h ardwar e, and web in terfa ce versio n informa tion, use the show ve r s i o n co mm and .
2-1145 Catalyst 6500 S eries Switch C o mmand Reference —Release 8.1 78-15474-01 Chapter 2 Catalyst 6500 Series Switch an d ROM Monitor Commands show vers ion DRAM FLASH NVRAM Module Total Used Free.
2-1146 Catalyst 6500 Series Switch Command Refer e nce—Release 8.1 78-15474-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s show version Ta b l e 2 - 1 0 0 describes the fiel ds in the show v ersion com mand ou tput.
2-1147 Catalyst 6500 S eries Switch C o mmand Reference —Release 8.1 78-15474-01 Chapter 2 Catalyst 6500 Series Switch an d ROM Monitor Commands show vlan show vlan T o display VLAN informatio n, u se the show vlan co mman d.
2-1148 Catalyst 6500 Series Switch Command Refer e nce—Release 8.1 78-15474-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s show v lan 10 VLAN0010 active 18 6/1,6/3 11 VLAN.
2-1149 Catalyst 6500 S eries Switch C o mmand Reference —Release 8.1 78-15474-01 Chapter 2 Catalyst 6500 Series Switch an d ROM Monitor Commands show vlan This exam ple sh ows how to displa y inf or.
2-1150 Catalyst 6500 Series Switch Command Refer e nce—Release 8.1 78-15474-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s show v lan This exam ple shows how to di spla y .
2-1151 Catalyst 6500 S eries Switch C o mmand Reference —Release 8.1 78-15474-01 Chapter 2 Catalyst 6500 Series Switch an d ROM Monitor Commands show vlan Relat e d Commands set trunk set vlan show trunk Second ary-T ype T y pe of second ary VLAN port.
2-1152 Catalyst 6500 Series Switch Command Refer e nce—Release 8.1 78-15474-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s show vlan count ers show vlan cou nters T o displa y counters for all VLANs or a rang e of VLANs, use the show v lan counters co mmand.
2-1153 Catalyst 6500 S eries Switch C o mmand Reference —Release 8.1 78-15474-01 Chapter 2 Catalyst 6500 Series Switch an d ROM Monitor Commands show vlan counte rs Relat e d Commands clear vl an co.
2-1154 Catalyst 6500 Series Switch Command Refer e nce—Release 8.1 78-15474-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s show vlan verify-port-provisioning show vlan ver.
2-1155 Catalyst 6500 S eries Switch C o mmand Reference —Release 8.1 78-15474-01 Chapter 2 Catalyst 6500 Series Switch an d ROM Monitor Commands show vm ps show vmps T o di splay VM PS configura tion i nfor ma tion, use the show vmps comma nd. show vmps [ noalia s ] Syntax D escr i pti on Defaults Thi s command has no de fault setti ngs.
2-1156 Catalyst 6500 Series Switch Command Refer e nce—Release 8.1 78-15474-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s show vmps Relat e d Commands download set vmps server set vmps st ate State Stat u s on whether VMPS is enab led or disa bled.
2-1157 Catalyst 6500 S eries Switch C o mmand Reference —Release 8.1 78-15474-01 Chapter 2 Catalyst 6500 Series Switch an d ROM Monitor Commands show vm ps mac show vmps mac T o disp lay the MA C-ad dress- to-VLAN ma pping tabl e, use the show vmps mac com mand.
2-1158 Catalyst 6500 Series Switch Command Refer e nce—Release 8.1 78-15474-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s show vmps statis tics show vmps statistics T o display the VMPS statistics, u se the show vmps statistics command.
2-1159 Catalyst 6500 S eries Switch C o mmand Reference —Release 8.1 78-15474-01 Chapter 2 Catalyst 6500 Series Switch an d ROM Monitor Commands show vm ps vlan show vmps vlan T o displa y all the MA C addresses assigned to a VLA N in the VMPS table, use the sh ow vmps vl an comm and.
2-1160 Catalyst 6500 Series Switch Command Refer e nce—Release 8.1 78-15474-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s show vtp show vtp T o displa y devices and c onflict s betwee n devices in the VLAN Trunk Protocol (V TP) version 3 domain, use the show vtp command .
2-1161 Catalyst 6500 S eries Switch C o mmand Reference —Release 8.1 78-15474-01 Chapter 2 Catalyst 6500 Series Switch an d ROM Monitor Commands show vtp Relat e d Commands set vtp.
2-1162 Catalyst 6500 Series Switch Command Refer e nce—Release 8.1 78-15474-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s show vtp domain show vtp domain T o display VTP domain informati o n, use the show vtp domain comman d.
2-1163 Catalyst 6500 S eries Switch C o mmand Reference —Release 8.1 78-15474-01 Chapter 2 Catalyst 6500 Series Switch an d ROM Monitor Commands show vtp do main Relat e d Commands set vtp show vtp statistics Notificat ions Notificatio ns to SNM P (e nabl ed or disa bled ).
2-1164 Catalyst 6500 Series Switch Command Refer e nce—Release 8.1 78-15474-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s show vtp stati stics show vtp statisti cs T o display VTP statistics, use th e s how vtp st atist ics command.
2-1165 Catalyst 6500 S eries Switch C o mmand Reference —Release 8.1 78-15474-01 Chapter 2 Catalyst 6500 Series Switch an d ROM Monitor Commands show vtp s ta tistics Relat e d Commands clear vt p statistic s set vtp No of con fig revision errors Nu mber of conf ig re vision errors.
2-1166 Catalyst 6500 Series Switch Command Refer e nce—Release 8.1 78-15474-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s slip slip T o attac h or detach Se rial Line Internet Protocol (SLI P) for the co nsole port , use the slip command.
2-1167 Catalyst 6500 S eries Switch C o mmand Reference —Release 8.1 78-15474-01 Chapter 2 Catalyst 6500 Series Switch an d ROM Monitor Commands squeeze squeeze T o d el et e Fl ash fil es pe rm an en tly , use th e squeeze command . squeeze [ m/ ] device : Syntax D escr i pti on Defaults Thi s command has no de fault setti ngs.
Chapter 2 Ca talyst 6 500 Series Swi tch and ROM M onitor Comm ands stack 2-1168 Catalyst 6500 Series Switch Command Refer e nce—Release 8.1 78-15474-01 22 stack T o dump a st ack trace of fram es, use the stack co mmand . stack [ -d | - m ] [ num ] Syntax Descript ion Defaults The d efault for num is fi ve frames.
2-1169 Catalyst 6500 S eries Switch C o mmand Reference —Release 8.1 78-15474-01 Chapter 2 Catalyst 6500 Series Switch an d ROM Monitor Commands switch switch T o swi t ch the c lock f rom the super v i sor cloc k to th e inte rn al c l ock or fr om th e act ive supervisor engi ne to the stan dby supervis or engine , use the switch comm and.
2-1170 Catalyst 6500 Series Switch Command Refer e nce—Release 8.1 78-15474-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s switch cons ole switch console T o swi tch the c ons ole con nection physic ally to t he MSFC on the active supervisor engi ne, us e the switch consol e command.
2-1171 Catalyst 6500 S eries Switch C o mmand Reference —Release 8.1 78-15474-01 Chapter 2 Catalyst 6500 Series Switch an d ROM Monitor Commands switch fa bri c switch fabric T o reset th e acti ve Switch F abric Module and allo w the standb y Switch Fabric Module to take o ver , use the switch fabric command .
2-1172 Catalyst 6500 Series Switch Command Refer e nce—Release 8.1 78-15474-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s sync sync T o write th e workin g in-cor e copy o f en vironment v ariables an d the aliases out to NVRAM so they are read on the ne x t reset, use the sync comman d.
2-1173 Catalyst 6500 S eries Switch C o mmand Reference —Release 8.1 78-15474-01 Chapter 2 Catalyst 6500 Series Switch an d ROM Monitor Commands sysre t sysret T o display the return informatio n from the last booted system image, use the sysret comman d.
2-1174 Catalyst 6500 Series Switch Command Refer e nce—Release 8.1 78-15474-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s tclquit tclquit T o exit f rom a to ol co mma nd lan guage (TC L) shel l, use t he t clquit com mand.
2-1175 Catalyst 6500 S eries Switch C o mmand Reference —Release 8.1 78-15474-01 Chapter 2 Catalyst 6500 Series Switch an d ROM Monitor Commands tclsh tclsh T o sta rt a tool co mm and langu age (T CL) sh ell, use the tc lsh command. tclsh Syntax D escr i pti on This comm a nd ha s n o keywords or argume nts.
2-1176 Catalyst 6500 Series Switch Command Refer e nce—Release 8.1 78-15474-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s telnet telnet T o start a T elnet conn ection to a rem ote host or to encrypt a T elnet sessio n, use the teln et command.
2-1177 Catalyst 6500 S eries Switch C o mmand Reference —Release 8.1 78-15474-01 Chapter 2 Catalyst 6500 Series Switch an d ROM Monitor Commands test cab le-diagn osti cs test cable-d iagnostics T o.
2-1178 Catalyst 6500 Series Switch Command Refer e nce—Release 8.1 78-15474-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s test cable-diagnostics Examples This example sh .
2-1179 Catalyst 6500 S eries Switch C o mmand Reference —Release 8.1 78-15474-01 Chapter 2 Catalyst 6500 Series Switch an d ROM Monitor Commands test sn mp tr ap test snmp trap T o send an SNMP trap message to the trap recei ver s, use the test snmp trap co mm and.
2-1180 Catalyst 6500 Series Switch Command Refer e nce—Release 8.1 78-15474-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s tra cer oute traceroute T o di splay a h op- by-hop path th rough an I P ne twork f rom th e Catal yst 6500 se rie s swi tch t o a spe ci fic destinati on ho st, use the tracer oute co mmand.
2-1181 Catalyst 6500 S eries Switch C o mmand Reference —Release 8.1 78-15474-01 Chapter 2 Catalyst 6500 Series Switch an d ROM Monitor Commands tracerou te Usage Guid el i nes T o i n te r r up t tr aceroute after the command has been is sued, press Ctrl-C .
2-1182 Catalyst 6500 Series Switch Command Refer e nce—Release 8.1 78-15474-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s tra cer oute Ta b l e 2 - 1 1 0 describes the fiel ds in the trac ero ute comm an d o utpu t.
2-1183 Catalyst 6500 S eries Switch C o mmand Reference —Release 8.1 78-15474-01 Chapter 2 Catalyst 6500 Series Switch an d ROM Monitor Commands unalias unalias T o remov e the alias name and as sociated value from the alias list, us e the unalias comman d.
2-1184 Catalyst 6500 Series Switch Command Refer e nce—Release 8.1 78-15474-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s undel ete undelete T o recover a delete d file on a Flash memo ry device, use the undelete comman d.
2-1185 Catalyst 6500 S eries Switch C o mmand Reference —Release 8.1 78-15474-01 Chapter 2 Catalyst 6500 Series Switch an d ROM Monitor Commands unse t=varnam e unset=v arname T o remov e a vari able name from the v ariable list, use the unset= varname command.
2-1186 Catalyst 6500 Series Switch Command Refer e nce—Release 8.1 78-15474-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s varname= varname= T o set the v ariable VA R N A M E to varv alue , use the varnam e= command. No te that th e syntax va rnam e = sets the variab le to a NULL str ing.
2-1187 Catalyst 6500 S eries Switch C o mmand Reference —Release 8.1 78-15474-01 Chapter 2 Catalyst 6500 Series Switch an d ROM Monitor Commands verif y verify T o co nf irm the checksum o f a f ile on a Flash de vice, use the verify command .
2-1188 Catalyst 6500 Series Switch Command Refer e nce—Release 8.1 78-15474-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s wait wait T o cau se the C LI to pau se for a specif ied number of s econd s befo re ex ecuting t he ne xt co mmand , use the wait comman d.
2-1189 Catalyst 6500 S eries Switch C o mmand Reference —Release 8.1 78-15474-01 Chapter 2 Catalyst 6500 Series Switch an d ROM Monitor Commands whichb oot whichboot T o determine which file booted, use the whichboot comman d. whichboot Syntax D escr i pti on This comm a nd ha s n o argume nts or keyword s.
2-1190 Catalyst 6500 Series Switch Command Refer e nce—Release 8.1 78-15474-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s write write T o uplo ad the cu rren t configuratio n to th e network or di splay th e configur ation inf orma tion cu rrently i n running m em ory , u se t he write comm and.
2-1191 Catalyst 6500 S eries Switch C o mmand Reference —Release 8.1 78-15474-01 Chapter 2 Catalyst 6500 Series Switch an d ROM Monitor Commands write Exam ples Th is example sh ows how to upload the syste m5 .
2-1192 Catalyst 6500 Series Switch Command Refer e nce—Release 8.1 78-15474-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s write This exam ple sh ows how to uploa d t he ru nni ng syst em configu ratio n to a pre spe cified loc ation : Console> (enable) write memory Upload configuration to bootflash:switch.
2-1193 Catalyst 6500 S eries Switch C o mmand Reference —Release 8.1 78-15474-01 Chapter 2 Catalyst 6500 Series Switch an d ROM Monitor Commands write tech -suppo rt write tech-sup port T o g ener a.
2-1194 Catalyst 6500 Series Switch Command Refer e nce—Release 8.1 78-15474-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s write tech-support Note I f y o u a re u pl o a .
2-1195 Catalyst 6500 S eries Switch C o mmand Reference —Release 8.1 78-15474-01 Chapter 2 Catalyst 6500 Series Switch an d ROM Monitor Commands write tech -suppo rt • show pr oc mem • show pr o.
A- 1 Catalyst 6500 Series Switch Command Reference—Release 8.1 78-15474-01 APPEND IX A Acronyms T able A-1 d ef ines the ac ronyms used in this p ublication .
A- 2 Catalyst 6500 S eries Switch C o mmand Reference —Release 8.1 78-15474-01 Appendix A Acronyms CPLD Comple x Pr ogr amma ble Log ic D e vice CRC cyclic redun dancy check CRF concentrato r relay .
A-3 Catalyst 6500 Series Switch Command Reference—Release 8.1 78-15474-01 Appendix A Acronyms HTTP HyperT ext T r ansfe r Protocol ICD Interna tiona l Co de D esi gnator ICMP Inte rnet C ont rol Mes.
A- 4 Catalyst 6500 S eries Switch C o mmand Reference —Release 8.1 78-15474-01 Appendix A Acronyms MOP Mai nten an ce O p erat io n Pro t ocol MO TD message of th e day MSFC Multilayer Switch Fea tu.
A-5 Catalyst 6500 Series Switch Command Reference—Release 8.1 78-15474-01 Appendix A Acronyms PV I D port V LAN identifier PVST p er VLAN spanning tree QoS quality of service RADIUS Remote Access Di.
A- 6 Catalyst 6500 S eries Switch C o mmand Reference —Release 8.1 78-15474-01 Appendix A Acronyms TFTP T rivial File T ransfer Protocol TGT ticket grantin g ticket TOS t y pe of s erv i ce TL V typ.
B-1 Catalyst 6500 Series Switch Command Reference—Release 8.1 78-15474-01 APPEND IX B Acknowledgments for Open-Source Software The C atalyst op erat ing syst em soft ware pipe comman d uses H enry Spe ncer’ s regular expressio n libra ry (regex).
B-2 Catalyst 6500 S eries Switch C o mmand Reference —Release 8.1 78-15474-01 Appendi x B Acknowledgmen ts for Open -Source Software.
IN-1 Catalyst 6500 Series Switch Command Reference—Release 8.1 78-15474-01 INDEX Symbols ? (help) comm an d c om ple ti o n 1-11 displaying ma tc hes 1-11 switch CLI 1-9 Numerics 3DES keys defining 2-327 removi ng 2-39 802.
Index IN-2 Catalyst 6500 Series S witch Command Reference—Release 8.1 78-15474-01 aggreg ate rate limit clearin g 2-95 aging t ime informatio n displaying 2-710 alias clearin g 2-7 defining 2-215 di.
Inde x IN-3 Catalyst 6500 Series Switch Command Reference—Release 8.1 78-15474-01 setting NAM envir onment 2-238 synchroniz ing aut o-confi g file 2-240 boot c onfi gurat ion regi ster setting 2-232.
Index IN-4 Catalyst 6500 Series S witch Command Reference—Release 8.1 78-15474-01 display ing adja cencies 2-852 displaying CE F table info rmati on 2-844 displaying e ntry info rmati on 2-852 displ.
Inde x IN-5 Catalyst 6500 Series Switch Command Reference—Release 8.1 78-15474-01 scrolli ng dow n line or scre en 1-6 scrolling to sp ecified tex t 1-6 transpos ing mistyped c haract ers 1-7 comman.
Index IN-6 Catalyst 6500 Series S witch Command Reference—Release 8.1 78-15474-01 D data ex port disabling gl obally 2-510 disabling on ag grega te police r 2-511 disabling on por t 2-514 enab lin g.
Inde x IN-7 Catalyst 6500 Series Switch Command Reference—Release 8.1 78-15474-01 displayi ng t ime r va lues 2-753 enabling au thentication 2-262 enabling re authentica tion 2-262 initializ ing on .
Index IN-8 Catalyst 6500 Series S witch Command Reference—Release 8.1 78-15474-01 displaying utilization 2-1113 fan tray s setting versions for highe r -powered and lower-powere d trays 2-270 file s.
Inde x IN-9 Catalyst 6500 Series Switch Command Reference—Release 8.1 78-15474-01 setting admini strative control 2-286 setting timers 2-288 VLAN declara tion 2-284 H hardware displaying ve rsio ns .
Index IN- 10 Catalyst 6500 Series S witch Command Reference—Release 8.1 78-15474-01 displaying st atus and fo rwarding speed 2-767 Intern et Group M ana geme nt Pr otoc ol See IGM P Intern et Protoc.
Inde x IN- 11 Catalyst 6500 Series Switch Command Reference—Release 8.1 78-15474-01 displaying pa th 2-184 Layer 2 pro tocol tunneling applying a CoS value to ingress tunnel ing ports 2-328 cleari n.
Index IN- 12 Catalyst 6500 Series S witch Command Reference—Release 8.1 78-15474-01 sending logging me ssage s to new Telne t sessions 2-356 MIB displaying CI SCO-IMA GE-MIB infor mation 2-791 MIB v.
Inde x IN- 13 Catalyst 6500 Series Switch Command Reference—Release 8.1 78-15474-01 displaying con tents of system module initiation log 2-874 displaying st atu s and inf orm ati on 2-871 enab lin g.
Index IN- 14 Catalyst 6500 Series S witch Command Reference—Release 8.1 78-15474-01 enabl ing SN MP ext ende d RMO N sup por t 2-563 setting boot envi ronment 2-238 shutting down module 2-380 naming.
Inde x IN- 15 Catalyst 6500 Series Switch Command Reference—Release 8.1 78-15474-01 policy-b ased forw arding See PBF Port Aggreg ation Pro tocol See PAgP port coun t ers displaying 2-926 restorin g.
Index IN- 16 Catalyst 6500 Series S witch Command Reference—Release 8.1 78-15474-01 displaying po rts running test 2-950 starting a nd stop ping test 2-1177 privat e VL AN See PVLAN privi leged leve.
Inde x IN- 17 Catalyst 6500 Series Switch Command Reference—Release 8.1 78-15474-01 setting default for all packets ar r iving th rough untruste d port 2-446 setting p acket buf fer memory 2-508, 2-.
Index IN- 18 Catalyst 6500 Series S witch Command Reference—Release 8.1 78-15474-01 setting encry ption and authentica tion 2-523 setting time betwee n retransmissions 2-526 setting up RADIUS server.
Inde x IN- 19 Catalyst 6500 Series Switch Command Reference—Release 8.1 78-15474-01 S securit y access lists See se curity ACL security ACL clearin g changes fr om edit buf fer 2-203 committing to N.
Index IN- 20 Catalyst 6500 Series S witch Command Reference—Release 8.1 78-15474-01 displayi ng gr oup or u sers w it h commo n ac cess policy 2-1054 displaying i nform ation 2-1040 displaying infor.
Inde x IN- 21 Catalyst 6500 Series Switch Command Reference—Release 8.1 78-15474-01 displaying path cost fo r instance s 2-1094 displaying po rtfa st i nfor ma tion 2-1093 displaying po rt inf orma .
Index IN- 22 Catalyst 6500 Series S witch Command Reference—Release 8.1 78-15474-01 comman d-l ine p roce ssing 1-3 comm an d m od es 1-3 console p ort 1-2 designati ng module s 1-10 help switch CLI.
Inde x IN- 23 Catalyst 6500 Series Switch Command Reference—Release 8.1 78-15474-01 setting severity level 2-350 system modem disabling 2-652 enab lin g 2-652 system name config uring 2-653 system s.
Index IN- 24 Catalyst 6500 Series S witch Command Reference—Release 8.1 78-15474-01 Terminal Access Contr o ller Ac cess Control System Plus See TACACS+ terminal display setting default number of li.
Inde x IN- 25 Catalyst 6500 Series Switch Command Reference—Release 8.1 78-15474-01 displayi ng V ACL- t o-VL AN mappi n g 2-1038 mapping existin g VACL-to-VLAN 2-550 removi ng all ACEs fr om VACL 2.
Index IN- 26 Catalyst 6500 Series S witch Command Reference—Release 8.1 78-15474-01 displaying V TP domain inform ation 2-1162 displaying VT P statistics 2-1164 ena bling and disab ling o n a per- p.
Un punto importante, dopo l’acquisto del dispositivo (o anche prima di acquisto) è quello di leggere il manuale. Dobbiamo farlo per diversi motivi semplici:
Se non hai ancora comprato il Cisco Systems 6500 è un buon momento per familiarizzare con i dati di base del prodotto. Prime consultare le pagine iniziali del manuale d’uso, che si trova al di sopra. Dovresti trovare lì i dati tecnici più importanti del Cisco Systems 6500 - in questo modo è possibile verificare se l’apparecchio soddisfa le tue esigenze. Esplorando le pagine segenti del manuali d’uso Cisco Systems 6500 imparerai tutte le caratteristiche del prodotto e le informazioni sul suo funzionamento. Le informazioni sul Cisco Systems 6500 ti aiuteranno sicuramente a prendere una decisione relativa all’acquisto.
In una situazione in cui hai già il Cisco Systems 6500, ma non hai ancora letto il manuale d’uso, dovresti farlo per le ragioni sopra descritte. Saprai quindi se hai correttamente usato le funzioni disponibili, e se hai commesso errori che possono ridurre la durata di vita del Cisco Systems 6500.
Tuttavia, uno dei ruoli più importanti per l’utente svolti dal manuale d’uso è quello di aiutare a risolvere i problemi con il Cisco Systems 6500. Quasi sempre, ci troverai Troubleshooting, cioè i guasti più frequenti e malfunzionamenti del dispositivo Cisco Systems 6500 insieme con le istruzioni su come risolverli. Anche se non si riesci a risolvere il problema, il manuale d’uso ti mostrerà il percorso di ulteriori procedimenti – il contatto con il centro servizio clienti o il servizio più vicino.
