Manuale d’uso / di manutenzione del prodotto MA-186 del fabbricante Toshiba
Vai alla pagina of 119
TEC Electronic Cash Register MA-186-100 SERIES Owner ’ s Manual Table of Contents.
Copyright © 1999 by TOSHIBA TEC CORPORATION All Rights Reserved 570 Ohito, Ohito-cho, Tagata-gun, Shizuoka-ken, JAPAN NOTICE This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to Part 15 of the FCC Rules.
(i) Safety Summary EO1-11115 Safety Summary Personal safety in handling or maintaining the equipment is extremely important. Warnings and Cautions necessary for safe handling are included in this manual. All warnings and cautions contained in this manual should be read and understood before handling or maintaining the equipment.
(ii) Safety Summary EO1-11115 CAUTION This indicates that there is the risk of personal Injury or damage to objects if the machines are improperly handled contrary to this indication.
EO1-11115 MA-186-100 SERIES T ABLE OF CONTENTS Page 1. Introduction .................................................................................................................................... 1 2. Unpacking ...................................
Copyright © 1999 by TOSHIBA TEC CORPORATION All Rights Reserved 570 Ohito, Ohito-cho, Tagata-gun, Shizuoka-ken, JAPAN CAUTION: 1. This manual may not be copied in whole or in part without prior written permission of TOSHIBA TEC. 2. The contents of this manual may be changed without notification.
- 1 - EO1-11115 MA-186-100 SERIES For supplies, service or assistance call: Please have the following information available when you call: Product Name: TEC Electronic Cash Register Model: MA-186-100 Serial Number: Place Purchased: Date of Purchase: 1.
- 2 - EO1-11115 MA-186-100 SERIES (1) (2) (3) (4) (5) (6) (7) (8) (9) 2. Unpacking (1) Control Key ( REG Key, MA Key, S Key: 2 pcs. respectively) (2) Dry Battery (SUM-3 1.5V) (3 pcs.) (3) Stamp Ink (1 pc.) (4) Drawer Key (2 pcs.) (5) Printer Cover Key (2 pcs.
- 3 - EO1-11115 MA-186-100 SERIES 1 3. Outline of Preparation Procedure Before Operating the ECR This chapter shows the outline of set-up procedure of the ECR before actually starting the ECR operation. Remove the cash register from the carton, referring to Chapter 2.
- 4 - EO1-11115 MA-186-100 SERIES Perform programming of the register, such as De- partments and PLUs, according to the require- ment of the market and your store (refer to Chap- ter 14 and thereafter).
- 5 - EO1-11115 MA-186-100 SERIES 4. Appearance and Nomenclature Operator’s Display Used by the operator to confirm the entry contents and the status of the register. (page 7) Customer’s Display Provided for the customer to see the amount entered for each item and sale total.
- 6 - EO1-11115 MA-186-100 SERIES 5. Control Lock and Control Keys Control Keys There are three types of Control keys: the REG (registration) key, the MA (manager) key, and the S (service) key. REG Key: The REG key is used by the cashier or clerk who operates ordinary transac- tion entries.
- 7 - EO1-11115 MA-186-100 SERIES AMOUNT PLU DP RPT TL ST CG SIGN ON ALM R OFF AMOUNT TL ST CG Customer’s Display SIGN ON ALM R OFF TL ST CG 6. Display The Operator’s Display (front display) is located at the top of the register just above the keyboard.
- 8 - EO1-11115 MA-186-100 SERIES Numeric Display AMOUNT (8 digits for total display, 7 digits for entries): Displays the numeric data, such as amount, quantity, etc. When the obtained total or subtotal amount is 8-digit, the RPT digit is also used for the amount display.
- 9 - EO1-11115 MA-186-100 SERIES 7. Keyboard The following is the standard keyboard layout, which was initially set at the factory. This register is designed to be capable of programming most of the keys at desired locations or adding some optional keys in place of the current keys.
- 10 - EO1-11115 MA-186-100 SERIES 8. Installing the Paper Roll The printer may be used for journal-format print (standard status) or receipt-format print (optional status). For reversing the status, refer to Chapter “16. System Option Setting”, Address 2-Bit 7” on page 72.
- 11 - EO1-11115 MA-186-100 SERIES Incorrect If the 2-ply paper has been placed as shown below, the printing contents are not copied. In this case, re-place the 2-ply paper as shown above. Note on placing the 2-ply paper: Correct When using the 2-ply paper, place it into the paper pocket as shown below.
- 12 - EO1-11115 MA-186-100 SERIES 7 8 If used for journal, insert the paper end into the slit on the Take-up Reel and wind it around the reel two or three times, set the reel to the holder, and press the [FEED] key for a while to tense the paper. If used for receipt, do not wind the paper end around the Journal Take-up Reel.
- 13 - EO1-11115 MA-186-100 SERIES Examples) 1:05 a.m.: 1:32 p.m.: 9. T ime and Date Setting T ime Setting or Adjustment The register has a clock function. Once the time is set, the time is kept even when the power is turned off. The 24-hour system (the military time) is used for time setting, display, and printing.
- 14 - EO1-11115 MA-186-100 SERIES Month-Day-Year order Month Day Year NOTE: The date set/print order is Month-Day-Year. If you want to change the order into Day-Month-Year or Year-Month-Day, see Chapter “16. System Option Setting”, Address 16 - Bits 7 and 8 on page 81.
- 15 - EO1-11115 MA-186-100 SERIES Displaying the T ime The current time is displayed in the “AMOUNT” area when the Control Lock is turned to REG from any other position. When the Control Lock position is changed or any entry operation starts, the displayed time disappears.
- 16 - EO1-11115 MA-186-100 SERIES → Go to 1) , 2) , or 3) shown below. Indications of types of keys shown below: ..... Individual Numeric Key | | ..... Data to be entered through Numeric Keys ..... Function Key 1) Tax 1; Full Breaks (Non-cyclic Breaks + Cyclic Breaks) |max.
- 17 - EO1-11115 MA-186-100 SERIES 7 3 3 3) Tax 1; % Rate Only → (to indicate that no breaks are entered) |Tax Rate applied to any amount| → (The description for the Tax Rate in the above case 2) is also applied to this case.) NOTES: 1. In a single-tax area, the [TX1/M] key may be labeled as [TX/M] key.
- 18 - EO1-11115 MA-186-100 SERIES ex. 2) Tax 1; “A” Break and % Rate Combination Tax Table Key Operation Control Lock: SET Amount Range Tax Levied $0.00 to $0.10 0¢ $0.00 to $0.09 0¢ $0.10 to $0.29 1¢ $0.30 to $0.59 2¢ $0.60 to $0.84 3¢ $0.85 to $1.
- 19 - EO1-11115 MA-186-100 SERIES Examples) 7% 12% 8.55% To reset the rate once set: GST Rate Setting (applicable to Canada only) Please note the following before operating the GST rate setting. The following preparations are required: 1) Select the “GST Active” status in Chapter “16.
- 20 - EO1-11115 MA-186-100 SERIES Non-taxable Limit Amount Setting (applicable to only certain areas in Canada) This non-taxable amount limit must be set only in certain areas in Canada. Condition: After Daily Financial Reset; refer to “NOTE on Condition” on page 15.
- 21 - EO1-11115 MA-186-100 SERIES → |Amount| → T ax Calculation T est Tax calculation can be tested by the following procedure. This operation will not affect any sales data. Operating Procedure: Use the MA Key to turn the Control Lock to “X” .
- 22 - EO1-11115 MA-186-100 SERIES *1 *5 *2 *2 Key Code Key Name 85 NS (No-sale) 87 LC OPEN (Listing Capacity Open) 90 #/CID (Non-add Number/Cash-in- drawer) 91 #/NS (Non-add Number/No-sale) 92 PLU (P.
- 23 - EO1-11115 MA-186-100 SERIES Fill in: Key Name → Key Code → (Refer to the “List of Keys” on the pre- ceding page.) For the Standard Keyboard Layout, refer to Chapter “7. Keyboard” on page 9. (The BLIND position is the unmarked step next to “Z”.
- 24 - EO1-11115 MA-186-100 SERIES NOTES: 1. If Key Installation Setting is operated for the first time, all the keys are already set as in the Standard Keyboard Layout. Therefore, set only the keys that are to be changed as to their locations or newly installed.
- 25 - EO1-11115 MA-186-100 SERIES 12. Daily Operation Flow The following shows a typical daily operation flow on the register. Reference Chapter Before Opening the Store ... • Ensure that the register is firmly plugged in the wall outlet. • Check if enough portion of paper roll is left.
- 26 - EO1-11115 MA-186-100 SERIES 13. T raining This chapter describes a training provided for new employed cashiers. After entering the training mode, a cashier may operate the same transaction entries as those in the REG mode.
- 27 - EO1-11115 MA-186-100 SERIES Training Start Receipt Training End Receipt Receipt issued in Training Mode Thank you Call again 05.- 28.- 9 7 ★★ ★★ 9 04 1 . 3 18-5 0 TT Thank you Call again 05.- 28.- 9 7 ★★ ★★ 0 04 1 . 4 18-5 3 TT Thank you Call again 05.
- 28 - EO1-11115 MA-186-100 SERIES Clearing Errors, or Clearing W rong Declaration Key or Wrong Numeric Entries When in sale entries an error has occurred with an alarm buzzer (beeps for about 2 seconds only), a wrong Declaration Key (such as [RTN MDSE] , [TX/M] , [GST/M] , etc.
- 29 - EO1-11115 MA-186-100 SERIES No-sale (Exchange) <operable outside a sale only> The No-sale transaction is used to open the drawer without relating to a sale, for such purposes of giving changes (to break a large-amount bill), checking the receipt/journal print condition, date or time accuracy, etc.
- 30 - EO1-11115 MA-186-100 SERIES R/A (Received-on-Account Key) Z OFF X REG SET . . . Thank you Call again 05.- 28.- 9 7 ★ 10.0 0 ★ 2.5 0 ★ 12.5 0 01 0 .
- 31 - EO1-11115 MA-186-100 SERIES PO AT/TL . . . Paid Out <operable outside a sale only> A paid-out transaction is used when an amount of money is removed from the drawer without relating to a sale, for the purpose of paying to wholesalers, etc.
- 32 - EO1-11115 MA-186-100 SERIES Department Status Programming: To use Department Keys, program how each Department Key is to be used, in accordance with merchandise categories, operativity of the key, etc.
- 33 - EO1-11115 MA-186-100 SERIES NOTES: 1. The tax tables of “Tax 1”, “Tax 2”, and “GST” should be programmed in Chapter “12. Tax Table Setting” on page 20.
- 34 - EO1-11115 MA-186-100 SERIES Thank you Call again 05.- 28.- 9 7 0.3 ★ 08 13 05 12 04 00 - 10 10 - 05 01 00 0 . 5 13-1 2 Dept. 10 RTN MDSE Department Status Program Receipt Format: Key Operatio.
- 35 - EO1-11115 MA-186-100 SERIES ex.) .......... indicates $ 39.99 .......... Allows to enter equal to or smaller than $39.99 in sale entries. Department LC (Listing Capacity) Programming: The LC setting is used to check an amount limit error.
- 36 - EO1-11115 MA-186-100 SERIES AT/TL NOTES: 1. All the Department Keys are open departments (no preset price set) as initial status. 2. If a Department Key is pressed with no Preset Price entry, the Key is set as an open-price Department Key. 3. If “0” is entered as Preset Price, the Department Key is set with Preset Price of $ 0.
- 37 - EO1-11115 MA-186-100 SERIES Dept. Price of the item (max. 7 digits; or limited by the Department LC) . . . () Dept. DPT SHIFT . . . To enter a sale item of the Department Nos. 21 to 40. If an error occurs here: Possible cause of error: • The price entered exceeds the LC.
- 38 - EO1-11115 MA-186-100 SERIES Dept. To enter a sale item of the Department Nos. 21 to 40 ... () DPT SHIFT DPT SHIFT . . . . . . . . . @/FOR Dept. Quantity Unit Price @/FOR Quantity REPEAT → Dept. ← ← If an error occurs here: Possible cause of error: • Exceeding the LC of the Department → Check the Unit Price.
- 39 - EO1-11115 MA-186-100 SERIES Split-Package-Pricing (Department SPP) This operation is used when a customer purchases only part but not all of the items in a package (example: only two tomatoes in a priced package of three tomatoes). Open-price Department .
- 40 - EO1-11115 MA-186-100 SERIES PLU (PLU Key) CA Thank you Call again 05.- 28.- 9 7 07 ★ 10.0 0 ★ 10.0 0 01 0 . 5 09-1 2 ← Automatically finalized as cash sale (Cash Total) Single-item Dep.
- 41 - EO1-11115 MA-186-100 SERIES Programming PLUs PLU Table Setting: Condition: To change setting of a PLU: When the required PLU sales total memory is zero (i.e.,when no sales are made or after a PLU Reset Report is taken to reset the sales data of the PLU into zero) To add new PLUs: Any time outside a sale.
- 42 - EO1-11115 MA-186-100 SERIES Thank you Call again 05.- 28.- 9 7 0.4 ★ 00.5 0 4 ★ 1.0 0 @ 01.0 0 2 ★ 2.0 0 @ 01.1 0 1 ★ 12 3 . 0 0 @ 20.0 0 3 ★ 10.0 0 @ 05.0 0 5 ★ 0.5 0 @ 10.0 0 9 ★ 3.0 0 @ 15.0 0 9 @ 00.7 00 0 . 6 13-1 4 PLU Code Link Department No.
- 43 - EO1-11115 MA-186-100 SERIES → PLU Code of PLU to be deleted PLU Code deleted Deletion Symbol Line Total number of PLUs remaining set in memory Thank you Call again 05.- 28.- 9 7 0.4 ★ 01.0 ---- ----- 00.6 00 0 . 7 13-1 6 VD ITEM CORR 4 @/FOR 0 1 AT/TL PLU ( ) or Repeat for other PLUs, if necessary.
- 44 - EO1-11115 MA-186-100 SERIES PLU Price Change Setting Receipt Format: Key Operation Control Lock: SET PLU Code New Preset Price 1 1 AT/TL PLU PLU Code Link Department No. New Preset Price Thank you Call again 05.- 28.- 9 7 0.0 ★ 01.1 0 1 ★ 12 3 .
- 45 - EO1-11115 MA-186-100 SERIES PLU To repeat PLU PLU Code PL PL TM TM 20.0 ★ 10.0 0 20.0 ★ 10.0 0 . . . Price PLU PLU Code To repeat AMT AMT PL TM . . . @/FOR Quantity PLU Code PLU . . . PLU Code PLU Quantity 4. X ★ 10.0 0 @ 20.0 ★ 40.0 0 .
- 46 - EO1-11115 MA-186-100 SERIES PL CA Thank you Call again 05.- 28.- 9 7 10.1 ★ 3.4 0 ★ 3.4 0 01 0 . 7 09-1 8 (Listing Capacity Open Key) LC OPEN LC OPEN % + % – Single-item PLU Entry If a De.
- 47 - EO1-11115 MA-186-100 SERIES Z OFF X REG SET for %- rate for %+ rate This portion is required only when any decimal portion is contained in the rate. % rate 0 to 99.999 % + • % – • 0 7 2 5 1 5 4 5 • 3 • 8 %- 5% is set. %+ 10% is set. Thank you Call again 05.
- 48 - EO1-11115 MA-186-100 SERIES . . . %- Manual Rate %- %+ %+ 01 ★ 6.0 0 5. % - -0.3 0 Manual Rate ← Dept 1 $6.00 5% on $6.00 = $0.30 is discounted. %- %+ %+ ★ 15.0 0 10. % + ★ 1.5 0 ST ← Subtotal $15.00 obtained 10% on $15.
- 49 - EO1-11115 MA-186-100 SERIES DOLL DISC . . . Amount to be discounted (max. 7 digits) An amount of $0.40 is entered as Dollar Discount -0.4 0 ← (Dollar Discount Key) Z OFF X REG SET ST ITEM CORR (Item Correct Key) Dept 1 $6.00 is entered but item-corrected.
- 50 - EO1-11115 MA-186-100 SERIES VOID 01 ★ 6.0 0 5. % - -0.3 0 01 ★ 6.0 0 5. % - ★ 0.3 0 VD The process of the amount resulted from % calculation is reversed at Void.
- 51 - EO1-11115 MA-186-100 SERIES ALL VOID (All Void Key) Thank you Call again 05.- 28.- 9 7 02 ★ 4.5 0 14. X 0.3 0 @ 03 ★ 4.2 0 20.0 ★ 10.0 0 ★ 18.7 0 ★★ ★★★★ 01 2 . 7 13-4 2 ITEM CORR C ← Prints the subtotal when Transaction Cancel is executed.
- 52 - EO1-11115 MA-186-100 SERIES NOTES: 1. When an item once purchased with a Percent Discount or Percent Charge is returned, the item can be returned with the Percent Discount/Charge by attaching the [RTN MDSE] key to the same entry procedure as purchase.
- 53 - EO1-11115 MA-186-100 SERIES Symbol for Subtotal ★ 22.9 1 ST Subtotal Amount ← ← ST (Subtotal Key) Z OFF X REG SET ST .......... Z OFF X REG SET TXBL TL (Taxable Total Key) TXBL TL Subtotal Read When the sale total of the current sale is to be read by the customer’s request or the operator’s requirement, the [ST] key is used.
- 54 - EO1-11115 MA-186-100 SERIES CHK TND Tendered Amount Max. 8 digits CHK TND . . . AT/TL ★ 0.4 1 ★ 3.3 1 01 1 . 5 10-0 1 ← ← Tax Amount Cash Total Tax Amount Sales Total Cash Amount tendered Change due ★ 0.4 1 ★ 3.3 1 ★ 4.0 0 ★ 0.
- 55 - EO1-11115 MA-186-100 SERIES 4) Split-Tender (short- tender repeated by the different media) Example) Sale Item → ( ) → Entries → () RECEIPT ISSUE (Post-issue Receipt Key) Z OFF X REG SET CHK TND ★ 1.3 0 ★ 10.3 0 ★ 7.0 0 ★ 3.3 0 01 1 .
- 56 - EO1-11115 MA-186-100 SERIES Each of these keys is used to reverse the tax status of a required Department or PLU item to be entered in a sale. It is also used to reverse the Non-taxable status of [% +] , [% -] , and [DOLL DISC] keys into Taxable status.
- 57 - EO1-11115 MA-186-100 SERIES EX EX The sale portion (pre-taxed amount) subject to the tax exemption (Tax/PST 1 in this example). Sale portion (pre-taxed) exempted from GST Sale portion (pre-taxed) exempted from Tax/PST 1 Sale portion (pre-taxed) exempted from Tax/PST 2 ★ 1.
- 58 - EO1-11115 MA-186-100 SERIES Print/Non-print Options on Sale Receipts The following are items that can be programmed to be printed or not on sale receipts. To change the print/non-print status, refer to Chapter “16. System Option Setting” on page 69.
- 59 - EO1-11115 MA-186-100 SERIES (or ) Declaration of Program No. 7 for Hourly Range Table programming Hour (0 to 23) Repeat for setting next Hourly Ranges (max. 24 hourly ranges) Z OFF X REG SET 7 AT/TL Enter the time that ends the Hourly Range, in the 24-hour system using the military time.
- 60 - EO1-11115 MA-186-100 SERIES 7 0 #/CID AT/TL @/FOR 7 0 0 0 1 AT/TL Thank you Call again 05.- 28.- 9 7 0.7 ★ 08-0 0 09-0 0 10-0 0 13-0 0 16-3 0 18-0 0 00 1 . 0 08-5 1 @/FOR 0 0 8 0 0 9 0 0 3 1 0 3 6 1 0 0 8 1 #/CID #/CID #/CID #/CID #/CID #/CID Item Initial Status System Option Before Change Address No.
- 61 - EO1-11115 MA-186-100 SERIES T aking Read and Reset Reports Fundamental Concepts of Various Types of Reports Four types of Reports are available in connection with the Control Lock positions and the periods of data accumulation: Daily Read Report: It can be issued at any time and any number of times during the day.
- 62 - EO1-11115 MA-186-100 SERIES DPT SHIFT Report Name Key Operation Sample Page * Financial Read Control Lock: X 63 * Financial Reset ( NOTE 2) Control Lock: Z Hourly Sales Read Control Lock: X 66 .
- 63 - EO1-11115 MA-186-100 SERIES Thank you Call again 05.- 28.- 9 7 Z ★ 13.4 05.7 1 50 6 . ★ 13.4 05.7 1 01 10 21. ★ 42.7 5 02 4 63. ★ 31.0 6 03 8 38 4 . ★ 12.0 75.5 0 04 2 2. -2.0 0 05 1 3. ★ 1.5 0 06 0 0. ★ 0.0 0 07 1 1. ★ 10.0 0 08 0 0.
- 64 - EO1-11115 MA-186-100 SERIES ★ 1.2 0 6.9 0 1 ★ 2.5 3 2 ★ 0.0 0 3 47 2 . ★ 13.3 57.1 9 0. @ ★ 0.0 0 @ 1% - ★ 0.4 0 % - 1- ★ 0.4 0 - 19 ★ 13.3 56.3 9 16 ★ 13.3 40.8 2 1 ★ 7.2 6 2 ★ 8.3 1 2 ★ 12.5 0 3 ★ 6.5 0 ★ 13.3 43.5 8 2 ★ 10.
- 65 - EO1-11115 MA-186-100 SERIES - Memory Balance - Grand Total = Sum of Daily Gross Sales Gross Sale = (Sum of Depts) + (Sum of Tax/PST 1 & 2) + (Percent Charge) NOTE below + (Percent Discount .
- 66 - EO1-11115 MA-186-100 SERIES Daily Hourly Sales Read or Reset Report Thank you Call again 05.- 28.- 9 7 10Z ★★ 08-0 0 09-0 0 9 ★ 69.1 8 10-0 0 7 ★ 48.6 6 13-0 0 16-3 0 18-0 0 00.0 1 Z 00 4 . 8 13-4 3 CU CU Report Type Symbol Sales Data in Hourly Range from 18:00 yesterday to 8.
- 67 - EO1-11115 MA-186-100 SERIES Daily Media Sales & In-drawer Read Report Thank you Call again 05.- 28.- 9 7 X 16 ★ 11 7 . 8 4 ★ 10 5 . 9 3 2 ★ 10.
- 68 - EO1-11115 MA-186-100 SERIES Daily Individual Department Read Report Periodical Cashier Read or Reset Report Report Type Symbol Thank you Call again 05.- 28.- 9 7 4Z ★★ 1 11 33.4 5 ★ 72.6 5 0. @ ★ 0.0 0 @ ★★ 2 ★★ 8 00.0 1 Z 00 5 .
- 69 - EO1-11115 MA-186-100 SERIES Repeat for Bit status changes in all the required Addresses. Bit Nos. that are set to “SET” status (max. 8 Bit Nos. combination of 1 to 8) Address No. (max. 2 digits; 1 to 16) ( ) or Z OFF X REG SET 8 1 @/FOR → ST #/CID AT/TL #/NS 16.
- 70 - EO1-11115 MA-186-100 SERIES NOTES: 1. Do not program any Bit No. shaded and filled with “vacant” in the Address tables on the following pages.
- 71 - EO1-11115 MA-186-100 SERIES Content Bit No. Selective Status RESET SET Time on Journal and every Receipt in REG, X, Z, SET modes Purchased Item Count on Sale Receipts Manual Subtotal on Sales R.
- 72 - EO1-11115 MA-186-100 SERIES Address: 2 Initial SET Bit Nos. → 78 Your Selection → (Optional Functions 1) Content Bit No. Selective Status RESET SET 1 2 3 4 5 6 7 8 Fraction Roun.
- 73 - EO1-11115 MA-186-100 SERIES Address: 3 Initial SET Bit Nos. → 0 Your Selection → (Tax Status) [% +] key PST/Tax Status [% -] key PST/Tax Status [DOLL DISC] key PST/Tax Status [% +] key GST Status [% -] key GST Status [DOLL DISC] key GST Status -- vacant -- Content Bit No.
- 74 - EO1-11115 MA-186-100 SERIES Address: 6 Initial SET Bit Nos. → 0 Your Selection → ( [AT/TL] Key Function) Content Bit No. Selective Status RESET SET 1 2 to 8 TENDER or TOTAL Tender and Total Functions in finalizing a sale in REG mode -- vacant -- TENDER only Supplementary Description for Address 6: Bit 1: RESET status .
- 75 - EO1-11115 MA-186-100 SERIES Address: 7 Initial SET Bit Nos. → 13 Your Selection → ( [CHK TND] Key Function) Content Bit No. Selective Status RESET SET Tender and Total Functions.
- 76 - EO1-11115 MA-186-100 SERIES Address: 8 Initial SET Bit Nos. → 1 Your Selection → ( [Chg] Key Function) Content Bit No. Selective Status RESET SET Tender and Total Functions in f.
- 77 - EO1-11115 MA-186-100 SERIES Address: 1 1 Initial SET Bit Nos. → 68 Your Selection → (Optional Functions 2) Content Bit No. Selective Status RESET SET Short-tendering using any m.
- 78 - EO1-11115 MA-186-100 SERIES Address: 1 3 Initial SET Bit Nos. → 2 Your Selection → (Non-print Options 2) Content Bit No. Selective Status RESET SET 1 2 3 4 to 8 SEPARATE PRINT L.
- 79 - EO1-11115 MA-186-100 SERIES Address: 1 4 Initial SET Bit Nos. → 45 Your Selection → (GST Options) ... for CANADA Content Bit No. Selective Status RESET SET 1 2 3 4 5 6 7, 8 ADOPTED NOT ADOPTED (All bit status selections below are disregarded) GST Feature (for Canada only) Fraction Rounding Process on GST Calculations.
- 80 - EO1-11115 MA-186-100 SERIES Address: 1 5 Initial SET Bit Nos. → 4 Your Selection → (Optional Functions 3) Content No-sale Transaction Entry After Non-add Number Print Entries Receipt Consecutive No. on Journal and every Receipts in any mode Receipt Consecutive No.
- 81 - EO1-11115 MA-186-100 SERIES Address: 1 6 Initial SET Bit Nos. → 28 Your Selection → (Optional Functions 4) Content Bit No. Selective Status RESET SET 1 2 3 to 6 7 8 Drawer-close.
- 82 - EO1-11115 MA-186-100 SERIES Sign OFF (operable in signed-ON condition) 17. Cashier Signing Operation (optional function) The register will operate without any cashier identifying operation in the initial status. However, the register can be changed to require cashier signing for operating sale entries.
- 83 - EO1-11115 MA-186-100 SERIES NOTES: 1. The two-digit Secret Code portion, once entered for a cashier’s Sign ON, is set in the memory of the register. The Secret Code of the same cashier is checked every time his/her Sign ON is operated until the Daily Cashier Reset Report is taken at the end of the day.
- 84 - EO1-11115 MA-186-100 SERIES Reading of the Remaining Lines of E.J. Memory This operation is used to display the remaining number of lines in the E.
- 85 - EO1-11115 MA-186-100 SERIES Thank you Call again 05.- 28.- 9 7 Z ★★ 1 01 0 . 1 1 09-1 0 ★ 01 0 . 2 1 09-1 0 15 # ★ 10.0 0 ★ 2.5 0 ★ 12.5 0 01 0 . 3 1 09-1 0 NS CL CL CL CL CA RA RA NOTES: 1. The E.J. buffer contents are cleared whenever an Electronic Journal Report is printed automati- cally or by the manual operation.
- 86 - EO1-11115 MA-186-100 SERIES Format Contents to be Printed for Verification Page Department Preset Price Read: 87 Preset Price of each Department Department LC and Status Read: 87 LC(Listing Cap.
- 87 - EO1-11115 MA-186-100 SERIES Thank you Call again 05.- 28.- 9 7 X 01 0 1 . 73 02 0 2 . 94 03 0 0 . 57 04 0 0 . 00 - 05 0 0 . 00 06 0 0 . 00 07 1 0 . 00 08 1 0 . 00 09 0 0 . 00 10 1 0 . 00 - 00 1 . 8 09-0 3 Thank you Call again 05.- 28.- 9 7 X 01 @ 02 @ 03 @ 04 ★ 1.
- 88 - EO1-11115 MA-186-100 SERIES PLU Table Read Thank you Call again 05.- 28.- 9 7 X 00.5 0 4 ★ 1.0 0 @ 01.1 0 1 ★ 12 3 . 4 5 @ 05.0 0 5 ★ 0.5 0 @ 06.0 1 0 ★ 3.0 0 @ 07.0 0 3 @ 07.1 0 8 ★ 8.0 0 @ 07.2 0 9 ★ 9.0 0 @ 19.9 0 3 ★ 10.0 0 @ 00 1 .
- 89 - EO1-11115 MA-186-100 SERIES Thank you Call again 05.- 28.- 9 7 X 01 26 02 78 03 0 04 0 05 0 06 0 07 13 08 1 09 0 10 0 11 68 12 0 13 2 14 45 15 4 16 28 00 2 . 2 09-0 8 Address No. SET Bit Nos. ← ↓ System Option Read NOTE: The above sample shows the initial SET Bit Nos.
- 90 - EO1-11115 MA-186-100 SERIES 1 2 3 Turn the Control Lock to the REG position using the Control Key. To remove the Printer Cover, insert the Printer Cover Key to the Printer Cover Lock, and then turn it 90 ° clockwise.
- 91 - EO1-11115 MA-186-100 SERIES 4 Depress the [FEED] key to feed the re- maining paper end. CAUTION : Never try to pull out the re- maining paper end by hand.
- 92 - EO1-11115 MA-186-100 SERIES 6 7 4 Remove the Journal Take-up Reel from the holder, then remove the wound-up por- tion of the paper by pulling it sideways. 5 Cut the paper as shown in the figure. Depress the [FEED] key to feed the remaining paper end.
- 93 - EO1-11115 MA-186-100 SERIES Replacing the Ink Ribbon This ink ribbon is a consumable part and a TOSHIBA TEC’s exclusive. Ask your TOSHIBA TEC representative about the order of the ink ribbon. 1 Turn the Control Lock to the OFF position using the Control Key.
- 94 - EO1-11115 MA-186-100 SERIES 4 5 Thread the ribbon around the ribbon buffer, and then install the other ribbon spool while pushing the ribbon detector aside so that it may not catch the spool. 6 Turn the ribbon spool several times to re- move the slack in the ribbon.
- 95 - EO1-11115 MA-186-100 SERIES 1 Replenishing Ink to the Store Name Stamp Turn the Control Lock to the OFF position using the Control Key. 2 3 To remove the Printer Cover, insert the Printer Cover Key to the Printer Cover Lock, and then turn it 90 ° clockwise.
- 96 - EO1-11115 MA-186-100 SERIES 5 Return the stamp in the reverse procedure. 6 After replenishing ink, depress the [NS] key to check the density of the printed message. * Ordering a Store Name Stamp which contains your store name, address, and telephone No.
- 97 - EO1-11115 MA-186-100 SERIES 1 2 Battery Exchange To exchange batteries, please keep the power cord of the register connected to the wall outlet. If the batteries are removed with the power cord disconnected, the pro- grammed data and sales data will all be cleared.
- 98 - EO1-11115 MA-186-100 SERIES Remove the paper roll, the Take-up Reel (if used for Journal), and the Battery Cover. 3 Replace the old batteries with new ones. (Batteries: SUM-3 1.5V x 3 pieces) NOTE: Do not mix used and new batteries in the battery compartment.
- 99 - EO1-11115 MA-186-100 SERIES 3 To remove the Partition from the Coin Case, pull the Partition upward while push- ing the Coin Case outward. Media Slot The Media Slot provided at the front of the drawer is used to put non-cash media such as check in the drawer without opening it.
- 100 - EO1-11115 MA-186-100 SERIES 21. In Case of the Power Failure If a power failure occurs during business hours, all sales data stored in the memory are automatically protected by the batteries installed in the register. When any data was being printed on the power failure, the same data is automatically printed at the power recovery.
- 101 - EO1-11115 MA-186-100 SERIES Paper roll wrinkles. Cause 1: Paper roll is not placed correctly, or placed on the skew. Measure: Place the paper roll correctly. (Refer to page 10.) Cause 2: Failure of the printer itself Measure: Ask the store where purchased.
- 102 - EO1-11115 MA-186-100 SERIES 3. Trouble concerning Keyboard Key on the keyboard does not function. Cause 1: Control Lock is in the OFF position. Measure: Turn the Control Lock to the positions other than OFF using the Control Key. Cause 2: Failure of the keyboard itself Measure: Ask the store where purchased.
- 103 - EO1-11115 MA-186-100 SERIES Error tone beeps Cause 1: Operation procedure is incorrect. Measure: Depress the [C] key to clear the error, then check the operation procedure you attempted. Cause 2: Control Lock position is incorrect. Measure: Turn the Control Lock to the correct position using the Control Key.
- 104 - EO1-11115 MA-186-100 SERIES Use the S Key to turn the Control Lock to “ BLIND ”. 23. Status Clear and Memory Clear Operations The operations described in this chapter are provided for initial start-up of the machine or emergency but not to be operated as part of daily routines.
- 105 - EO1-11115 MA-186-100 SERIES Depress the following Numeric Key according to the display and print format for zero amount: Sales Memory Clear The operation defined as “Sales Memory Clear” will only clear the sales data accumlated in the register’s memory (report memory).
- 106 - EO1-11115 MA-186-100 SERIES Z OFF X REG SET (BLIND) Numeric Key 3 Zero-amount Format 0 . 0 0 . 0 for use in US or Canada AT/TL 9 1 9 All Memory Clear If the register becomes completely inoperative due to battery discharge or malfunction of the program memory, the All Memory Clear operation must be carried out.
- 107 - EO1-11115 MA-186-100 SERIES 24. Specifications Size ... 460 mm (width) x 453 mm (depth) x 299 mm (height including rubber feet) (or 355 mm (height) when Customer’s Display is popped up) Weight ... 11.4 kg Power Required ... AC 117V ± 10 %; 60Hz ± 10 % Power Consumed .
- 108 - EO1-11115 MA-186-100 SERIES Memory Protection Dry Battery SUM-3 1.5 x 3 pieces; Life of about 1 year. (Be certain to replace batteries with new ones every year.) Handling the Batteries • When inserting batteries, place them so that the positive (+) and negative (-) ends face the proper directions as shown in the battery compartment.
- 109 - EO1-11115 MA-186-100 SERIES ST AMP ORDER Dear Customer; A Receipt Stamp (Electro-stamp) “Thank you Call again” comes with each unit. If you prefer printing your company name or message to Thank you Call again for receipt inprint, please place your order by using the order form below.
- 110 - EO1-11115 MA-186-100 SERIES For supplies, service or assistance call: Please have the following information available when you call: Product Name: TEC Electronic Cash Register Model: MA-186-10.
.
PRINTED IN JAPAN E.
TEC TEC CORPORATION.
Un punto importante, dopo l’acquisto del dispositivo (o anche prima di acquisto) è quello di leggere il manuale. Dobbiamo farlo per diversi motivi semplici:
Se non hai ancora comprato il Toshiba MA-186 è un buon momento per familiarizzare con i dati di base del prodotto. Prime consultare le pagine iniziali del manuale d’uso, che si trova al di sopra. Dovresti trovare lì i dati tecnici più importanti del Toshiba MA-186 - in questo modo è possibile verificare se l’apparecchio soddisfa le tue esigenze. Esplorando le pagine segenti del manuali d’uso Toshiba MA-186 imparerai tutte le caratteristiche del prodotto e le informazioni sul suo funzionamento. Le informazioni sul Toshiba MA-186 ti aiuteranno sicuramente a prendere una decisione relativa all’acquisto.
In una situazione in cui hai già il Toshiba MA-186, ma non hai ancora letto il manuale d’uso, dovresti farlo per le ragioni sopra descritte. Saprai quindi se hai correttamente usato le funzioni disponibili, e se hai commesso errori che possono ridurre la durata di vita del Toshiba MA-186.
Tuttavia, uno dei ruoli più importanti per l’utente svolti dal manuale d’uso è quello di aiutare a risolvere i problemi con il Toshiba MA-186. Quasi sempre, ci troverai Troubleshooting, cioè i guasti più frequenti e malfunzionamenti del dispositivo Toshiba MA-186 insieme con le istruzioni su come risolverli. Anche se non si riesci a risolvere il problema, il manuale d’uso ti mostrerà il percorso di ulteriori procedimenti – il contatto con il centro servizio clienti o il servizio più vicino.
