Manuale d’uso / di manutenzione del prodotto XE-A201 del fabbricante Sharp
Vai alla pagina of 105
ELECTRONIC CASH REGISTER CAJA REGISTRADORA ELECTRONICA INSTRUCTION MANUAL MANUAL DE INSTRUCCIONES XE-A201 MODEL MODELO.
How to Use the Instruction Manual The illustration above is a screen of Acrobat Reader 5.0. The scroll bar also enables you to page through the document. Browsing with bookmarks Bookmarks can mark parts of a document for quick access. Using Acrobat Reader This manual is in the format of Acrobat Reade r .
FCC Regulations state that any unauthorized changes or modifications to this equipment not expressly approved by the manufacturer could void the user ’ s authority to operate this equipment. Note: This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to Part 15 of the FCC Rules.
CONTENTS INTRODUCTION ............................................................................................................................................1 IMPORTANT .............................................................................
BASIC FUNCTION PROGRAMMING (For Quick Start) ............................................................................27 1 Date and Time Programming ...................................................................................................
4 P AR TS AND THEIR FUNCTIONS Front vie w Rear view External View 1 The printer is one station type thermal printer, and therefore it does not require any type of ink ribbon or cartridge. Lift the rear of the printer cover to remove. To re-install, hook on the pawls on the cabinet and close.
5 The mode switch can be operated by inserting one of the two supplied mode keys - manager (MA) and operator (OP) keys. These keys can be inserted or removed only in the “ REG ” or “ OFF ” position. The mode switch has these settings: OFF: This mode locks all register operations.
6 This key locks and unlocks the drawer. To lock it, turn 90 degrees counterclockwise. To unlock it, turn 90 degrees clockwise. Drawer Loc k Key 6 Operator display Customer display (Pop-up type) Amount: Appears in the far-right eight (max.) positions.
7 GETTING ST AR TED Please follow the procedure shown below. The batteries are not installed and the power is OFF. Three new “ AA ” batteries must be installed in the cash register to prevent the data and user-programmed settings from being erased from the memory, when the AC cord is accidentally disconnected or in case of power failure.
8 3. Insert three new “AA” batteries as illustrated at the right. When the batteries are properly installed “ ” on the display will disappear. 4. Close the battery compartment cover. Be sure to observe precautions shown on page 1 when handling batteries.
9 5. When not using the take-up spool (using as receipt paper): • Cut off the excess paper using the edge of the inner cover, and replace the printer cover.
10 Now you are ready for sales registration. Starting sales entries 7 • Split pricing entry This is not factory preset. You must enable this function.
11 O VER VIEW OF FLO W OF D AIL Y SALES ENTRIES Things to do before you start sales entries: • Make sure the power cord is securely inserted into the AC outlet. • Turn the mode switch to OP X/Z position, and check if time is correctly set. • Replace the drawer, if removed for safety.
12 B ASIC SALES ENTR Y On the below, basic sales entry example when selling department items by cash is shown. For operation details, please refer to each section. Mode switch setting 1. Turn the mode switch to the REG position. Clerk assignment 2. Enter your clerk code.
13 Clerk assignment Prior to any item entries, clerks must enter their clerk codes into the register. However, the code entry may not be necessary when the same clerk handles the next transaction.
14 Single item entries Department entries For a merchandise classification, the cash register provides a maximum of 99 departments. To the departments, group attributes such as taxable status are applied on items when they are entered.
15 Repeat entries You can use this function for entering a sale of two or more of the same items. Repeat pressing a department key, d key or p key as shown on key operation example. Multiplication entries When you sell a large quantity of items, it is convenient to use the multiplication entry method.
16 Split pricing entries This function is practical when the customer wants to purchase items normally sold in bulk. To realize this function, you must change the programmed setting. Refer to “ Various Function Selection Programming 1 ” ( job code 70 ) for programming details.
17 Single item cash sale (SICS) entry • This function is useful when a sale is for only one item and is for cash. This function is applicable only to those departments that have been set for SICS or to their associated PLUs or subdepartments.
18 Check tendering Cash or chec k sale that does not require entry Enter items and press the A key if it is a cash sale or press the C if it is a check sale. Your register will display the total sale amount. Charge (credit) sale Enter items and press the charge key ( c ).
19 A utomatic tax When the register is programmed with a tax rate (or tax table) and the tax status of an individual department is set for taxable, it computes the automatic tax on any item that is entered directly into the department or indirectly via a related PLU.
20 T ax status shift The machine allows you to shift the programmed tax status of each department or the PLU key by pressing the T and/or U keys before those keys. After each entry is completed, the programmed tax status of each key is resumed. Example: Selling the following items for cash with their programmed tax status reversed • One $13.
21 OPTIONAL FEA TURES Discount and premium entries using the percent ke y The percent key is used to apply a manually entered or preset discount or premium percent rate to individual items or to a merchandise subtotal. In the default setting, you can manually enter a discount percent rate to both individual items and merchandise subtotal.
22 Discount for the merchandise subtotal Discount for item entries Refund entries For a refund of a department item, start with entering the refund amount and press the f key, then press the correspon.
23 Currency con version The register allows payment entries in a foreign currency (only cash payment is available). Pressing the V key creates a subtotal in the foreign currency.
24 Received-on Account and P aid-out Entries When you receive on account from a customer or when you pay an amount to a vendor, it is a good idea to use the r key or the R key respectively. For the received-on-account (RA) entry, enter the amount, and press the r key.
25 CORRECTION If you make an incorrect entry relating to a department, PLU/subdepartment, percentage ( % and & ), discount ( - ) or refund, you can void this entry by pressing the v key immediately after the incorrect entry.
26 You can void an entire transaction. Once subtotal void is executed, the transaction is aborted and the register issues a receipt. This function does not work when more than 30 items have been entered. Any errors found after the entry of a transaction has been completed or during an amount tendered entry cannot be voided.
27 PRIOR T O PR OGRAMMING Before starting sales entries, you must first program necessary items so that the cash register suits your sales manner. In this manual, there are three sections, BASIC FUNCT.
28 Time For setting the time, enter the time in 4 digits using the 24-hour format. For example, when the time is set to 2:30 AM, enter 230; and when it is set to 2:30 PM, enter 1430. In the display, current time is displayed in 12-hour format. For AM time, “ ” and for PM time “ ” will appear in the rightmost position with the current time.
29 Example: Programming the tax rate 4% as tax rate 2 with tax exempt as 12¢ • If you make an incorrect entry before pressing the third @ key in programming a tax rate, cancel it with the l key. • You do not need to enter the trailing zeros of the tax rate (after the decimal point), but you do need to enter the decimal for fractions.
30 The first figure to be entered depends upon whether the difference between a minimum breakpoint to be entered and the preceding minimum breakpoint is not less than $1.00 or more than 99¢. When the difference is not less than $1.00, enter “ 1, ” and when it is not more than 99¢, enter “ 0 ” or nothing.
31 • If the tax is not provided for every cent, modify the tax table by setting the tax for every cent in the following manner. When setting the tax, consider the minimum breakpoint corresponding to unprovided tax to be the same as the one corresponding to the tax provided on a large amount.
32 A UXILIAR Y FUNCTION PR OGRAMMING Merchandise can be classified into a maximum of 99 departments. Items sold with use of the department keys can later be printed on a report that shows the quantities sold and sales amounts classified by department.
33 Example: Programming department 2 as taxable 1, SICS, negative department, entry digit limit - 7 digits, and allowing open & preset entry. (ABCDEFGH: 00011173) Preset unit price To program another department, start from the beginning without pressing the A key.
34 Unit price and associated department assignment *2: 1 through 1200 (Depending on the EJ memory size setting, up to 200) *3: For a subdepartment, set the limit amount of unit price entry. To program the following PLU, start from entering a unit price or an associated department code without pressing the A key.
35 The cash register provides miscellaneous keys such as % , & , - , f , r , R , V , t , C , c and A . While the cash register is pre-programmed so you can use these keys, you must set a currency conversion rate to use V key. You can also program these keys for more convenient use.
36 Amount for - P ercent rate limitation f or % and & • Percent entries that exceed the upper limit may be overridden in the MGR mode. • 10.00% can be entered as 10 or 10P00 .
37 *: Item: Selection: Entry: A Tax 4 status Taxable 1 Non-taxable 0 B Tax 3 status Taxable 1 Non-taxable 0 C Tax 2 status Taxable 1 Non-taxable 0 D Tax 1 status Taxable 1 Non-taxable 0 E +/- sign + (.
38 Entry digit limit for r , R and t • For rR , enter 0 to 9 (digits), and for t (manual tax), enter 0 to 7 (digits). Entry digit limit is in effect for REG-mode operation but can be overridden in the MGR mode. The entry digit limit is represented by the number of allowable digits for maximum entry or total amount.
39 The register allows you to program the texts for clerk names, department item names, PLU/subdepartment item names, and so on, if necessary. There are two ways for programming text: using character keys on the keyboard or entering character codes with numeric keys on the keyboard.
40 Alphanumeric character code table (DC): Double-size character code ✱ ✱ Code 001 002 003 004 005 006 007 008 009 010 011 012 013 014 015 016 017 018 019 020 021 022 023 024 025 026 027 028 029 0.
41 Department text *To program departments 17 through 32, press the department shift key. PLU text (item label) Function text * Function no.: See “ List of function texts ” shown on the following page. Text programmed for PLU code 1 s 2 P 1 p MELON s A (Programming MELON to PLU1) Print Key operation example Text programmed for dept.
42 List of function texts • The items marked with “ * ” are for Canada only. • The function no. 53 “Exempt VAT” is only effective for the Canadian tax system (2 GST, VAT type).
43 Clerk names Logo messages The register can print programmed messages on every receipt. On the standard model, the graphic logo is printed on the receipt. If you want to print logo messages, please change the logo print format. (See page 51 for the programming details.
44 To print the logo message “ THANK YOU ” using double sized characters and centering on the third line. A 6-line logo message is preprogrammed when shipped.
45 Setting consecutive number s The cash register provides the electronic journal (EJ) function. By default, a maximum of 1000 lines can be stored in memory. If you want to store more journal data, you can expand to a maximum of 2000 lines, although the maximum number of PLUs is decreased to 200 codes because the memory is shared with PLU settings.
46 Function parameters f or EJ * Item: Selection: Entry: A Always enter 0. (Fixed position) 0 B Always enter 0. (Fixed position) 0 C Temporary EJ printing during transaction Disallow 0 Allow* 1 D EJ p.
47 The cash register provides various detailed functions listed below. • Function selection for miscellaneous keys • Print format • Receipt print format • Function selection for tax • Others For this programming, job code entry style is applied.
48 Print format Job code: 6 * Item: Selection: Entry: A Printing style Use the printer for journal printing 0 Use the printer for receipt printing* 1 B Receipt print format Total 0 Detailed* 1 C Time .
49 Other programming Job code: 61 * Item: Selection: Entry: A Always enter 0. (Fixed position) 0 B Always enter 0. (Fixed position) 0 C Minus dept. and PLU/subdept.
50 Job code: 70 * Item: Selection: Entry: A Split pricing counting Quantity* 0 Package 1 B Multiplication/split pricing entry availability Allow multiplication entry only* 0 Allow both of multiplication and split pricing 1 C Always enter 0. (Fixed position) 0 D Always enter 0.
51 The cash register provides various options so you can use the register to suit your sales needs. In this section, you can program the following features (parameters within parentheses indicates def.
52 RS-232C interface (1) RS-232C ter minal number (2) RS-232C transmission f or m * Item: Selection: Entry: A Transmission line form Half duplex system 1 Full duplex system* 0 (3) RS-232C baud rate * Item: Selection: Entry: A Always enter 0.
53 Thermal printer density * By default, 50 is set. To make the print darker, set a larger number, and to make the print lighter, set a smaller number.
54 A UT O key programming — A utomatic sequencing key — If you program frequently performed transactions or report sequences for the a key, you can call those transactions and/or reports simply by pressing the a key in key operations. Programming for a ; entering a PLU 2 item (programmed unit price: 1.
55 Mode Dept. code Dept. text Function no.& its text Dept. unit price w/sign Dept. function Minus department Function parametrs (F-H) Function parametrs (F-H) Discount amt.
56 2 Programming report 2 Job code A to H from the left Training clerk specification Language selection EJ memory type * Job code #63, 64, 65, 67, 69, 71, 72, 76, 77, 85, 87 and 95 are fixed settings, for which you cannot change the settings.
57 READING (X) AND RESETTING (Z) OF SALES T O T ALS • Use the reading function (X) when you need to take a reading of sales information entered since the last reset. You can take this reading any number of times. It does not affect the register ’ s memory.
58 Full sales report • Sample report *1: When you take X1 report, “ X1 ” is printed. *2: Printed in the Z1 report only. *3: When the Canadian tax system is selected, the following is printed here.
59 Full sales report • Sample report The subsequent printouts are the same in format as in the X1/Z1 full sales report. *1: When you take X2 report, “ X2 ” is printed.
60 EJ REPOR T READING AND RESETTING The cash register provides electronic journal (EJ) function. This function is intended to record the journal data in a memory instead of journal paper, and print the data as an EJ report. The register records the journal data in REG, PGM, VOID, X1/Z2 and Z2/Z2 modes.
61 O VERRIDE ENTRIES Programmed limit for functions (such as for maximum amounts) can be overridden by making an entry in the MGR mode. On this example, the register has been programmed not to allow discounts entries over $1.00. REG-mode 1500 # entries 250 - .
62 OPERA T OR MAINTENANCE When power is lost, the machine retains its memory contents and all information on sales entries. • When power failure is encountered in register idle state or during an entry, the machine returns to normal operation after power recovery.
63 This cash register displays a low battery symbol ( ) when the batteries are low, and displays a no battery symbol ( ) when batteries are extremely low or batteries are not installed. When the low battery symbol is displayed, replace the batteries with new ones as soon as possible.
64 Removing the paper r oll When a red dye appears on the paper roll, it is time to replace it. Replace the paper roll with new one. If you plan on not using the register for an extended period of time, remove the paper roll, and store it in an appropriate place.
65 Installing the paper roll Caution: The paper cutter is mounted on the cover. Be careful not to cut yourself. 1. Turn the mode switch to the REG position with the AC cord connected. 2. Remove the printer cover. 3. Check that the print head release lever is in the printing position.
66 When the printed text is getting dark or faint, paper dust may be stuck to the print head. Clean the print head as follows: Caution: • Never touch the print head with a tool or anything hard as it may damage the head. • The paper cutter is mounted on the cover.
67 The malfunctions shown in the left-hand column below, labelled “ Fault, ” do not necessarily indicate functional faults of the machine. It is therefore advisable to refer to “ Checking ” shown in the right-hand column before calling for service.
68 SPECIFICA TIONS Model: XE-A201 Dimensions: 13.0 (W) x 16.9 (D) x 11.0 (H) in. (330 (W) x 428 (D) x 280 (H) mm) Weight: 16.8 Ib (7.6 kg) Power source: 120V AC ± 10%, 60 Hz Power consumption: Stand-by 7W Operating 34.5W (max.) Working temperature: 32 °F to 104 °F (0 °C to 40 °C) Electronics: LSI (CPU) etc.
INDICE INTRODUCCION............................................................................................................................................1 IMPORTANTE ...............................................................................
3 P AR TES Y SUS FUNCIONES El selector de modo funciona insertando una de las dos llaves de modo suministradas: la llave del administrador (MA) y la del operador (OP). Estas llaves pueden insertarse o sacarse sólo cuando el selector esté en la posición “REG” u “OFF”.
4 P ARA EMPEZAR Siga el procedimiento mostrado a continuación. Las pilas no están instaladas y la alimentación está desconectada. 1. Inicialice la caja registradora Para que la caja registradora pueda funcionar correctamente, deberá inicializarla antes de ponerla en funcionamiento por primera vez.
5 P ARA EL OPERADOR REGISTR O B ASICO DE VENT AS A continuación se muestra un ejemplo de registro básico de ventas de artículos de sección en metálico. Para los detalles de la operación, consulte cada sección respectiva. Ajuste del selector de modo 1.
6 Función ON/OFF (de emisión/no emisión) de recibos Cuando emplea la impresora para emitir recibos, podr á inhabilitar la impresi ó n de recibos en el modo REG. Pulse la tecla R en la posici ó n OP X/Z. Esta tecla cambia el estado de impresi ó n de recibos de ON a OFF.
7 • Cuando se emplea la tecla de registro de código de sección * 1 Menos que los importes de l í mite superior programado Cuando se introduce cero, s ó lo se a ñ ade la cantidad de ventas. Registros de PLU/subsecciones La caja registradora ya est á programada para el modo PLU y cero para el precio unitario.
8 Registros de venta en metálico de un solo artículo (SICS) • Esta funci ó n es ú til cuando se vende solamente un art í culo en met á lico. Esta funci ó n es aplicable s ó lo a las secciones que se han ajustado para SICS o a sus PLU o subsecciones asociadas.
9 Impuestos automáticos Cuando se ha programado una tasa de impuestos (o tabla de impuestos) en la caja registradora y el estado de impuestos para una secci ó n individual est á ajustado a imponibl.
10 Cálculo porcentual para el subtotal de mercancías ~ m 10 %A Cálculo porcentual para registros de artículos 800 + 7 P 5 %A Registros de descuento y recar go empleando la tecla de descuento La te.
11 • Pulse la tecla l después de pulsar la tecla V para cancelar el pago en una divisa. • Si se programa, se imprime un símbolo de moneda extranjera. Registros de recibido a cuenta y de pa gado Cuando recibe un pago a cuenta o cuando usted paga a un abastecedor, es aconsejable emplear la tecla r o la tecla R respectivamente.
12 PR OGRAMA CION DE LAS FUNCIONES B ASICAS (P ara el inicio rápido) Para programar la caja registradora, ponga la llave del administrador en el selector de modo y gírela a la posición PGM. Fecha Para ajustar la fecha, introduzca la fecha con 8 dígitos empleando el formato de mes-día-año (MM/DD/AAAA), y pulse entonces la tecla s .
13 Ejemplo: Programaci ó n de la tasa de impuestos del 4% como tasa de impuestos 2 con exenci ó n de impuestos de 12¢ T abla de impuestos (aplicab le al impuesto añadido) Si se encuentra en una localidad que emplea una tabla de impuestos para el c á lculo de los impuestos, podr á programar consecuentemente la caja registradora.
14 Este primer n ú mero que se introduce depende de si la diferencia entre un punto de divisi ó n m í nimo a introducirse y el punto de divisi ó n m í nimo anterior no son de menos de $1,00 ni de m á s de 99¢.
15 Estado de impuestos (imponible 1 a 4 / no imponible) • Cuando se efectúa un registro de una sección imponible en una transacción, los impuestos se calculan automáticamente de acuerdo con la tabla o tasa de impuestos asociada.
16 Selección de PLU/subsección *1: 1 a 1.200 (Dependiendo del ajuste del tamaño de la memoria EJ, hasta 200) *2: 0 para la subsección o 1 para PLU T asa para % , & y V *: Tasa 0,00 – 100,00 .
17 P arámetros de función para % , & y - *: Elemento: Selección: Registro: A Estado de impuestos 4 Imponible 1 No imponible 0 B Estado de impuestos 3 Imponible 1 No imponible 0 C Estado de impu.
18 P arámetros de función para C , c y A (cuando se usa como tecla CA) * 1: Elemento: Selección: Registro: A Impresi ó n de pie del recibo Habilitar 1 Inhabilitar 0 B Registro de importe recibido .
19 Para programar la palabra “ Clerk01 ” con la letra “ C ” de tama ñ o doble. Para que la letra “ C ” sea de tama ñ o doble Wg Para que el tama ñ o de los caracteres vuelva al normal W.
20 Lista de textos de función 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 (–) %1 %1 %2 %2 Total neto de ventas NETO 1 Subtotal neto de imponible .
21 Nombres de dependiente Mensajes de membrete La caja registradora puede imprimir mensajes programados en cada recibo. En el modelo estándar, se imprime el membrete gráfico en el recibo. Si desea imprimir mensajes de membrete, cambie el formato de impresión de membrete.
22 PR OGRAMA CION A V ANZAD A El número de caja registradora y el número consecutivo se imprimen en el recibo o en el registro diario. Número de caja registradora Ajuste de números consecutiv os La caja registradora incorpora la función de registro diario electrónico (EJ).
23 * Elemento: Selección: Registro: A Introduzca siempre 0. (Posici ó n fija) 0 B Introduzca siempre 0. (Posici ó n fija) 0 C Impresi ó n temporal de EJ durante la Inhabilitar 0 transacci ó n Hab.
24 Selecci ó n de funci ó n para teclas miscel á neas C ó digo de tarea: 5 * Elemento: Selecci ó n: Registro: A PO en el modo REG Habilitar la operaci ó n PO en el modo REG* 0 Inhabilitarla 1 B .
25 Selección de función para impuestos Código de tarea: 15 * Elemento: Selección: Registro: A a F Introduzca siempre 0. (Posición fija) 0 G Disponibilidad de borrado de los Habilitar el borrado d.
26 Código de tarea: 66 * Elemento: Selección: Registro: A Impresión de un recibo después de la Sólo el total 0 transacción Detalles* 1 B Impresión del importe cuando el precio Inhabilitar la im.
27 Formato de impresión del mensaje del membrete Podr á seleccionar el n ú mero de l í neas del mensaje del membrete, y la posici ó n en la que se imprime en el recibo o registro diario.
28 (5) Ajuste de tiempo v encido de RS-232C Densidad de impresora térmica * En el ajuste inicial se ajusta 50. Para oscurecer la impresi ó n, ajuste un n ú mero mayor, y para que sea m á s clara, ajuste un n ú mero menor.
29 La máquina le permitirá leer todos los programas almacenados en el modo PGM. Secuencia de las teclas para la lectura de pr ogramas almacenados Para detener la lectura del informe de programación de PLU, gire el selector de modo a la posición MGR.
30 • Cuando las cantidades de ventas y los importes de ventas son cero, se pasa por alto la impresión. Si no desea que se pase por alto, cambie la programación. (Consulte el apartado de “ Formato de impresión ” de la sección “Programación 1 de selección de diversas funciones”.
31 Lectura y reposici ó n de los datos del registro diario electr ó nico (emisi ó n de informe EJ) Podr á leer los datos del registro diario almacenados en la memoria EJ en el formato del registro diario ejecutando el procedimiento siguiente en el modo X1/Z1 u OP X/Z.
32 Si se termina el papel de la impresora, se parará la impresora, y aparecerá “PPPPPPPPPP” en el visualizador. No pueden aceptarse los registros de teclas. Instale el rollo de papel nuevo, y luego pulse la tecla l . Si se levanta el cabezal de impresión, se parará la impresora y aparecerá “H” en el extremo izquierdo del visualizador.
33 Utilice siempre rollos de papel especificados por SHARP. Si usa otros rollos de papel que no sean los especificados, pueden originarse atascos de papel y funcionar mal la registradora.
34 Cuando emplee el carrete de toma (cuando se usa como papel de registro diario): • Inserte el extremo del papel en la ranura del carrete. (Pulse la tecla F para alimentar m á s papel si es necesario.) • Bobine el papel dos o tres vueltas en torno al eje del carrete.
35 El caj ó n de la caja registradora es extra í ble. Despu é s de terminar la jornada laboral, extraiga el caj ó n. Para extraer el caj ó n, tire del mismo completamente hacia delante y extr á igalo levant á ndolo. La caja de monedas de 5 denominaciones tambi é n es extra í ble.
36 D 18 2 E 17 1 1 I 22 6 J 21 5 N 26 10 O 25 9 S 30 14 T 29 13 B 20 4 C 19 3 G 24 8 H 23 7 L 28 12 M 27 11 Q 32 16 R 31 15 E 17 Ejemplo: Leche Pan Emplee estas etiquetas con las teclas de secci ó n.
Un punto importante, dopo l’acquisto del dispositivo (o anche prima di acquisto) è quello di leggere il manuale. Dobbiamo farlo per diversi motivi semplici:
Se non hai ancora comprato il Sharp XE-A201 è un buon momento per familiarizzare con i dati di base del prodotto. Prime consultare le pagine iniziali del manuale d’uso, che si trova al di sopra. Dovresti trovare lì i dati tecnici più importanti del Sharp XE-A201 - in questo modo è possibile verificare se l’apparecchio soddisfa le tue esigenze. Esplorando le pagine segenti del manuali d’uso Sharp XE-A201 imparerai tutte le caratteristiche del prodotto e le informazioni sul suo funzionamento. Le informazioni sul Sharp XE-A201 ti aiuteranno sicuramente a prendere una decisione relativa all’acquisto.
In una situazione in cui hai già il Sharp XE-A201, ma non hai ancora letto il manuale d’uso, dovresti farlo per le ragioni sopra descritte. Saprai quindi se hai correttamente usato le funzioni disponibili, e se hai commesso errori che possono ridurre la durata di vita del Sharp XE-A201.
Tuttavia, uno dei ruoli più importanti per l’utente svolti dal manuale d’uso è quello di aiutare a risolvere i problemi con il Sharp XE-A201. Quasi sempre, ci troverai Troubleshooting, cioè i guasti più frequenti e malfunzionamenti del dispositivo Sharp XE-A201 insieme con le istruzioni su come risolverli. Anche se non si riesci a risolvere il problema, il manuale d’uso ti mostrerà il percorso di ulteriori procedimenti – il contatto con il centro servizio clienti o il servizio più vicino.
