Manuale d’uso / di manutenzione del prodotto 454 del fabbricante Capresso
Vai alla pagina of 23
Model #454 Cof feeTEAM ™ S 10-cup, 50 oz. Digital Cof fee Maker / Bur r Grinder Combination • Operating Instructions • W arranty • Mail-in or Fax-in Pr oduct Registration.
IMPOR T ANT SAFEGUARDS When using electrical appliances, basic safety precautions should always be followed, including the following: 1. Read all instructions.
1a. W elcome and Thank Y ou ....................................................4 1b. How to reach Capr esso ......................................................4 2. Important information about coffee beans and the built-in Burr Grindcer ...........
A TTENTION: T races of Coffee In order to ensur e proper functioning, your CoffeeTEAM S has been calibrated and tested with coffee beans. As a r esult, some traces of coffee may r emain in your machine. 1a. W elcome and Thank Y ou Thank you for choosing this unique CAPRESSO product.
• Do not add any liquid flavorings or syrups to the beans. • If you like flavored beans we r ecommend buying liquid flavor- ings at your local coffee stor e.
USER COMPONENTS A Bean Container Lid B Bean Container C Fineness Selector Dots (not shown) D Screw for Feeder Channel Cover E Feeder Channel Cover with window F Feeder Channel G Operating Panel and Di.
4. Equipment The CoffeeTEAM S (#454) comes with: a. this instruction book (includes warranty and Capresso pr oduct registration) b. an order form for parts and accessories c. one measuring scoop d. one glass carafe with lid e. one GoldT one filter , size 4 f.
7. Preparing the machine 7.1 Before First Use a. After unpacking clean all loose parts with warm water and make yourself familiar with the differ ent functions. b. After reading the instructions, brew 3 cups of water to clean all internal parts and to activate the charcoal filter .
b. Push the "prog" button (G10). The saucer blinks. The display will read "AM 12:00" and shows the number "10" in bold. c. Push and hold the”h”-button (G8) to program the hour at which you would like to make coffee later .
7.6 Flashing LCD Display • If you unplug the machine for more than 10 seconds and then plug it in again, the LCD display will flash. • If you did not unplug the machine and the LCD display flashes, it indicates that the electrical power was interrupted for mor e than 10 seconds.
find a differ ence in taste in your coffee when using the water filtra- tion system. However , most tap water is treated with chlorine. The water filter cartridge removes up to 82% of the chlorine found in your tap water . Initial Preparation: • Unscrew the bottom of the filtration container (K) and place the cartridge (flat side upwards) inside.
7.9 Filling The W ater Container Open the water container lid (I) and pour the desired amount of fresh, cold water thr ough the filtra- tion container (K). Note : Using the cup graduation on the glass carafe, always pour approximately one cup of water more into the water container to compensate for water lost during the brewing pr ocess.
7.11 Cover Lid The cover lid (L) minimizes static coffee particles clinging to the out- side of the filter holder . • Open the water container lid (I). • Make sure that the filter holder insert and the GoldT one filter (or your filter paper) are inserted in the filter holder (O).
coffee could flow upwar ds into the feeder channel. • Push the on/off button (G4) until the red light turns on. The grinder will start grinding and the coffee will fall into the filter . Through the window in the feeder channel cover you can actually see how the ground coffee moves forward.
this case immediately replace carafe and let all the coffee flow into the carafe. (This happens when the mesh of the GoldT one filter is clogged up causing coffee grounds to over -flow . If you use filter paper , use the correct size (size 4), and check if there was a hole in the bottom of the filter paper).
9. Grinding and Brewing Cof fee Later • Program the timer and grinder setting as described in chapter 7.5, page 8. • Fill beans into the bean container (see page 10, chapter 7.7). • Fill the desired amount of water into the machine (see page 12, chapter 7.
10c. Filter Holder Insert (M)/ Drip Stop (N): Clean the filter holder insert and the drip stop under run- ning water . Check to make sure that the drip stop closes com- pletely under running water also. 10d. Bean Container (A): When the bean container is empty , use a dry cloth to wipe off any oil deposits.
b. With a coin, turn the screw on top of the feeder channel a quarter turn counter clockwise to the 12 o’clock position. c. Firmly lift the feeder channel cover upwards and to the right as shown, and set aside. Note: The feeder channel cover will make a "snapping" sound when it is lifted from the machine.
g. Push the manual release button upwards. The filter holder will swing back to the right. Manual Release Button h. Wipe the inside of the feeder channel cover with a dr y cloth (do not immerse in water). i. Replace the feeder channel cover and turn the screw a quarter turn clockwise to the 3 o’clock position.
12. F AQ (T echnical Questions) Q1. I accidentally locked the filter holder underneath the grinder . What do I do? A. Push the Manual Release Button upwards (see page 19). Q2. There is no coffee coming out of the grinder . It seems as though the coffee is completely clogged inside the grinder .
tainer (as well as you can), remove the filter holder insert and GoldT one filter , open the water container lid and tur n the machine upside down over a sink. Y ou need to reset all settings. Q12. When I unplug the machine, the display shows random symbols for about 15 seconds, then turns off.
14. ONE YEAR LIMITED WARRANTY This warranty covers your CAPRESSO machine, model #454. This warranty is in effect for one year fr om the date of the first consumer purchase and is limited to the United States of America.
cut along dotted line CAPRESSO Cof feeTEAM S #454 Pr oduct Registration Please complete this registration after you have used your machine for a few days. Y our information will help us to better serve you in the futur e. Y ou can also register thr ough our website www .
Un punto importante, dopo l’acquisto del dispositivo (o anche prima di acquisto) è quello di leggere il manuale. Dobbiamo farlo per diversi motivi semplici:
Se non hai ancora comprato il Capresso 454 è un buon momento per familiarizzare con i dati di base del prodotto. Prime consultare le pagine iniziali del manuale d’uso, che si trova al di sopra. Dovresti trovare lì i dati tecnici più importanti del Capresso 454 - in questo modo è possibile verificare se l’apparecchio soddisfa le tue esigenze. Esplorando le pagine segenti del manuali d’uso Capresso 454 imparerai tutte le caratteristiche del prodotto e le informazioni sul suo funzionamento. Le informazioni sul Capresso 454 ti aiuteranno sicuramente a prendere una decisione relativa all’acquisto.
In una situazione in cui hai già il Capresso 454, ma non hai ancora letto il manuale d’uso, dovresti farlo per le ragioni sopra descritte. Saprai quindi se hai correttamente usato le funzioni disponibili, e se hai commesso errori che possono ridurre la durata di vita del Capresso 454.
Tuttavia, uno dei ruoli più importanti per l’utente svolti dal manuale d’uso è quello di aiutare a risolvere i problemi con il Capresso 454. Quasi sempre, ci troverai Troubleshooting, cioè i guasti più frequenti e malfunzionamenti del dispositivo Capresso 454 insieme con le istruzioni su come risolverli. Anche se non si riesci a risolvere il problema, il manuale d’uso ti mostrerà il percorso di ulteriori procedimenti – il contatto con il centro servizio clienti o il servizio più vicino.
