Manuale d’uso / di manutenzione del prodotto S230 del fabbricante Canon
Vai alla pagina of 137
.
.
SAFETY PRECAUTIONS The following precautions should be observed when servicing. 1. Since many parts in the unit have special safety-related characteristics, always use genuine CANON replacement parts. Especially critical parts in the power circuit block should not be replaced with other makes.
Application T his ma n ual has been issued by Canon In c . for quali f ied persons to lea r n te c hnical theor y , and repair of the products. Corrections This manual could include typographical errors or technical inaccuracies due to improvements or changes in the products.
1 Development Background 1-1 Development Objectives --------------------------------------------------------------------------------------------------- 1-1 1-2 Product Concept ------------------------.
.
1-1 1 Development Background 1–1 Development Objectives The original IXY DIGIT AL first put on sale in May 2000 has evolved through the IXY DIGIT AL 200, released in 2001, leading up to the present IXY DIGIT AL 200a in 2002.
1-2 High grade design / Ultra compact N: New features unique to the IXY DIGIT AL 320 (autumn 2002 model) U: Updated features from the IXY DIGIT AL 200a (already equipped on other models) U - Thin stylish design for enhanced high-grade character - Low-temperature, polysilicon 1.
1-3 - Selectable video output format (NTSC/P AL) - High-speed image transfer on USB Interface - International supporting twelve languages System accessories / Application software High Image Quality N - 1/2.7-type approx. 3.2M camera effective pixels CCD (3.
1-4 1–3 Design Concepts The IXY DIGIT AL 320 strives for an evolution befitting a premium three-megapixel camera while continuing the precedent set by the basic external appearance of the IXY DIGIT AL 200a.
1-5 1-4 Spec. Comparison between IXY Digital 320 and IXY Digital 200a IX Y D IGIT AL 3 2 0 IX Y D IGIT AL 2 0 0 a I ma ge s ens or ( CCD) C am e r a ef f ec ti v e pixels : A ppr ox . 3.2 M 1/2.7 inch s iz e (Total pix els: A ppr ox. 3.3 M ) C am er a ef f ec tive pixels : A ppr ox .
1-6 2 Features 2–1 High Grade Design / Ultra Compact - Thin stylish design for enhanced high-grade character The IXY DIGIT AL 320 strives for an evolution befitting a premium three-megapixel camera while continuing the precedent set by the basic external appearance of the IXY DIGIT AL 200a.
1-7 Photo 2-1 9-point AiAF 2-2 Full Features / Operation Ease - Selectable 9-point AiAF and single-point AF (range frame can be set arbitrarily) The AiAF range frame for the IXY DIGIT AL 320 has been increased from the previous 3 points (IXY DIGIT AL 200a) to 9 points.
1-8 50 100 1 50 200 250 1600 X1200 80 0X 600 1 280X9 60 1024X 768 64 0X 48 0 û´äm ( û´ ) 35 mm Ö ¤ ì áãE mm I XY DIGITA L 2 00/200 a 2048 X1536 I XY DIGITA L 3 2 0 <at L size> Recordin.
1-9 - T otal of 12 image quality modes Since the number of CCD pixels has been increased to approx. 3.0 million camera ef fective pixels with the IXY DIGIT AL 320, there are now 4 possible settings for the number of recording pixels: Large, Medium 1, Medium 2, and Small.
1-10 2-3 High Image Quality - 1/2.7-inch CCD with approximately 3.2 million camera effective pixels (total of about 3.3 million pixels) The IXY DIGIT AL 320 is equipped with a newly developed 1/2.7-inch 3.3 million pixel CCD (about 3.2 million camera effective pixels).
1-11 2–4 System Accessories/ Application Softwares - Full featured application software Figure 2–6 illustrates the general organization of the application software bundled with the IXY DIGIT AL 320. T ables 2–2 and 2–3 list the content of each CD-ROM disk.
1-12 { ZoomBrowser EX 4.0 (Win) made more ergonomic The ZoomBrowser EX 4.0 makes a vast improvement in usability from previous ZoomBrowser EX versions, featuring an updated user interface. (The previous ImageBrowser V e r . 2.7 is bundled for use with Macintosh computers.
1-13 Main improvements 1) Speed improvements Changed to lighter , more compact database files • Shorter launch time • Quicker camera downloads • Quicker thumbnail display of new images • S.
1-14 { File V iewer Utility 1.0 (suppor t for Mac OS X at a later date) From this release on, File V iewer Utility will be included in place of the previous RA W Image Converter The following are .
1-15 { PhotoRecord 1.6 (Win) for easy layout and printing of clear pictures Adds support for Exif 2.2 to previous version { PhotoStitch 3.1 for creating precise panoramic pictures Unchanged from previous version in terms of usability { RemoteCapture 2.
1-16 Photo 3-1 IXY DIGIT AL 320 Front (Opend lens) Photo 3-2 IXY DIGIT AL 320 Front Photo 3-3 IXY DIGIT AL 320 T op Photo 3-4 IXY DIGIT AL 320 Side Photo 3-5 IXY DIGIT AL 320 Rear 3 Exterior 3-1 Exter.
1-17 3-2 6-dimensional diagram unit : mm (inch) 87. 0 ( 3. 43) 25. 8( 1. 02) 26. 7( 1. 05) 9 3. 5 ( 3. 68) 57. 0( 2. 24) W i de : 12. 3 ( 0. 484) Te l e : 12.
1-18 3-3 Nomenclature Lens /Lens Cover Viewfinder eyepiece Indicators Speaker CF Card Slot Cover LCD Monitor Lock for the CF Card Slot Cover Flash Terminal Cover Optical Viewfinder Window ON/OFF Butto.
1-19 Remaining Image Capacity Shooting mode White Balance Resolution Macro Compression Exposure Compensation Flash Single Shot Light metering method <Auto Rotate> <Exposure Compensation> &.
1-20 -Setting the Printing Area (T rimming) DISP Zoom Lever and Cross Configured button adjust the size and position of the Trimming frame. Print -Editing Movies Return to Single Image V iew Play Prev.
1-21 4 Specifications 4-1 Camera Specifications Image sensor (CCD) Camera effective pixels (W x H) Approx. 3.2 million (2,080 x 1,542) T otal pixels (W x H) Approx. 3.3 million (2,140 x 1,560) Reading format Interline Chip size (W x H) 1/2.
1-22 LCD monitor T ype Low-temperature polycrystalline silicon TFT color LCD Effective pixels (W x H) Approx. 1 18 K- Pixels (490 x 240) Display size 38 mm diagonal (1.
1-23 Shutter and aperture Shutter type Mechanical shutter and electronic shutter Aperture type Round shaped diaphragm Shutter speed 15 - 1/1,500 sec. y 1/6 - 1 sec. shutter speed is only available with the flash off or slow sync. at Manual mode.
1-24 Shooting specifications Shooting modes Auto / Manual / Stitch assist / Movie Shooting function Digital zoom Maximum 3.2x (Maximum of approx.
1-25 Recording specifications <Still image> File format Design rule for Camera File system Digital Print Order Format (DPOF) V ersion 1.
1-26 Replay specifications Replay mode Single / Index (9 thumbnail images) / Magnification / Movie <Still image> Magnify Ap pr ox. 2 - 10x V ertical and horizontal Images are displayed vertically or horizontally according to the conversion camera’ s shooting position.
1-27 Display specifications Indicator (Upper) Green : Ready to record / Ready to communicate (during a computer connection) Blinking Green : During power-up camera / Recording to C.
1-28 Others Languages 12 languages are available for menu and messages. English, German, French, Dutch, Danish, Finnish, Italian, Norwegian, Swedish, Spanish, Chinese and Japanese .
1-29 Camera specifications Operating temperature 0 - 40°C Operating humidity 1 0 - 9 0 % Dimensions (W x H x D) 87.0 x 57.0 x 26.7 mm (3.
1-30 Functions A vailable in Each Shooting Mode A uto M a nual M anual ( l ong shutter) S t i tch A ssi st M o vi e A F f r a m e: 9point s ( A iA F ) A F f r a m e: 1point ( c e nter ) AF l o ck .
1-31 : Replayable : Impossible to replay RA W images : Thumbnail display A VI main image with thumbnail (.thm) only × : Not replayable IXY DIGIT AL 320 suppor ts 3200(H) x 2400(V) pixels. z Replay compatibility * 1 : Thumbnail display of RA W mode images.
1-32 4-2 System Requirements W indo ws Mac i nt os h Comp ut er M odel IBM P C/ A T c om pat i bl e P ower M ac i nt os h, P owerB ook , iM ac , i B ook OS W indo ws 98 (i nc l udi ng S ec ond E dit ion) / M e/ 2000/ X P - T WA I N Driver is c om patib le w it h W indow s 98/ 2 000.
1-33 5 System 5-1 Accessories Compatibility PS G 3 I D 200a I D 300a I D 3 2 0 PS A 2 0 0 PS A 1 0 0 PS A 4 0 PS A 3 0 PS S 3 0 PS S 4 0 PS S 4 5 P S G 2 I XY D 200 I XY D 300 PS A 2 0 PS A 1 0 IX Y D.
1-34 <S p eed Li te> 220E X O -- - - O- - - - O O- O - - 380E X O -- - - O- - - - O O- O - - 550E X O -- - - O- - - - O O- - - - 420E X O -- - - O- - - - O O- - - - ( M R -14E X ) O -- - - O ---.
1-35 5-2 System diagram 2002 CANON INC. PRINTED IN JAP AN CDI-E073-010 XXXXXXXXX • (*1) Also available for purchase separately . • (*2) Not sold in some regions.
1-36 γ γ γ γ γ White balance 1 Exposure Memorized color Fig.A-1 Comparison with image reproduction among copier ,scanner and digital camera Photo A-1 Picture comparison among decisive factors for.
1-37 Fig. A-3 Flow of iSAPS technology For more than 60 years since its inception, Canon has been asking ‘how can we take better pictures?’ As it has progressed, Canon has built up a tremendous database of know-how on photography as a result of its camera developments.
.
1. Functions of each unit 1.1 MAIN PCB ASS’Y --------------------------------------------------------------------------------------------------------- 2-1 1.2 FLASH/DC UNIT ----------------------------------------------------------------------------------------------------------- 2-1 2.
.
2-1 CHAPTER 2. TECHNICAL DESCRIPTION 1. Functions of each unit 1.1 MAIN PCB ASS’Y 1) Driving the CCD Sensor. 2) Conversion of the image signal from the analog signal to the digital signal. 3) Controlling the power supply and the system by CPU. (Refer to Sections 2.
2-2 CHAPTER 2. TECHNICAL DESCRIPTION 2. Outline of Circuits 2.1 Power Supply Control The power supply is controlled by the CPU mounted on the MAIN PCB ASS’Y. 2.1.1 Power Supply Block Diagram Fig. 2 Power System Block Diagram BA TTER Y DC/DC CONVERTER CPU Reg Reg Reg VBA TT FUSE OUTPUT 1, 2 VDD2 VDD3 (12V) (13.
2-3 CHAPTER 2. TECHNICAL DESCRIPTION 2.2 Signal Processing Fig. 3 Signal System Block Diagram 2.2.1 System Control The CPU on the main PCB ass ’ y controls the EF lens (motor, shutter), operation switch receiver, USB communication and flowing circuits.
2-4 CHAPTER 2. TECHNICAL DESCRIPTION 2.2.2 Picture Processing 1) The drive pulse of the CCD sensor is created by both clock from DSP and TG that is operated by sync.
2-5 CHAPTER 2. TECHNICAL DESCRIPTION Error Code E02 E03 E09 E14 E16 E18 E23 E24 E25 E26 Name AF TIME OUT EF TIME OUT JPEG DMA TIME OUT UNKOWN IMAGING TIME OUT ZOOM LENS ERROR CF NO SPACE POWER ON ERROR FOCUS PI ERROR CAPTURE TIME OUT Occurrence Conditions AF processing did not end within the specified time.
2-6 CHAPTER 2. TECHNICAL DESCRIPTION Error Code E27 E30 E50 E51 E52 Name CF WRITE TIME OVER POWER OFF ERROR CF FORMAT ERROR CF ACCESS ERROR QUICK REVIEW ERROR Occurrence Conditions Free area could not be secured in the buffer for the photograph image within the specified time in the continuous shooting mode.
2-7 CHAPTER 2. TECHNICAL DESCRIPTION 3.2 When a Problem Occurs [Remedy] • Check for any abnormalities in the mounting of probable faulty parts or connector connections referring to the table below. • Try replacing probable faulty parts referring to the table below.
.
CHAPTER 3. REPAIR INSTRUCTION CONTENTS 1. Before Starting the Repair Work ---------------------------------------------------------------------------------------------- -- 3-1 1.1 Precaution on Flash High Tension Circuit ------------------------------------------------------------------------------- 3-1 1.
.
3-1 CHAPTER 3. REPAIR INSTRUCTION Fig. 3-1 Precaution on flash high tension circuit 1. Before Starting the Repair Work Be sure to read the following precaution before starting the repair work. 1.1 Precaution on Flash High Tension Circuit • When the OPTICAL UNIT is removed, be sure to discharge the main capacitor.
3-2 CHAPTER 3. REPAIR INSTRUCTION CAUTIONS: 1. For the connectors of Type C and Type D, set them to the unlocked state before removing and inserting flexible card. After flexible card is inserted, set them to the locked state. 2. The flexible card is equipped with the holes as shown.
3-3 CHAPTER 3. REPAIR INSTRUCTION 2. Disassembly/Assembly 2.1 Procedure Disassembling procedure of PowerShot S230 and DIGITAL IXUS v 3 is shown by the following flowchart. Reverse the disassembling procedure to reassemble them. ∗ The pages to refer are shown in parenthesis ( ).
3-4 CHAPTER 3. REPAIR INSTRUCTION Fig. 3-4 REAR COVER UNIT, CF COVER (1)-1 a (1)-1 b (1)-1 REAR CO VER UNIT (1)-2 b (1)-1 e (1)-1 c (1)-1 (1)-1 d d (1)-1 a FRONT CO VER UNIT CF CO VER SHAFT (2)-2 CF CO VER (2)-1 CF CO VER SPRING (2)-3 2.0mm MET AL M1.
3-5 CHAPTER 3. REPAIR INSTRUCTION Fig. 3-5 FRONT COVER UNIT STRAP RING (1)-3 JA CK CO VER (1)-2 (1)-1 FRONT CO VER UNIT 2.3 FRONT COVER UNIT (1) FRONT COVER UNIT 1. Remove the FRONT COVER UNIT in the direction of arrow. 2. Remove the JACK COVER. 3. Remove the STRAP RING.
3-6 CHAPTER 3. REPAIR INSTRUCTION Fig. 3-6 SHUTTER BUTTON UNIT 2.4 SHUTTER BUTTON UNIT (1) SHUTTER BUTTON UNIT 1. Remove the screw of f . 2. While taking care of the claw remove the SHUTTER BUTTON UNIT. Claw (1)-1 f (1)-2 SHUTTER BUTT ON UNIT 4.0mm BLACK M1.
3-7 CHAPTER 3. REPAIR INSTRUCTION Fig. 3-7 SHIELD SHEET, MAIN PCB ASS ’ Y 2.5 SHIELD SHEET, MAIN PCB ASS ’ Y (1) SHIELD SHEET 1. Remove the two screws of g . 2. Remove the SHIELD SHEET. (2) MAIN PCB ASS ’ Y 1. Remove the screw of g . 2. Remove the Connector of the BATTERY BOX UNIT.
3-8 CHAPTER 3. REPAIR INSTRUCTION Fig. 3-8 LITHIUM BATTERY (2ND), MICROPHONE UNIT 2.6 LITHIUM BATTERY (2ND), MICROPHONE UNIT (1) LITHIUM BATTERY (2ND) 1. Remove the LITHIUM BATTERY. (2ND) (2) MICROPHONE UNIT 1. Remove the MICROPHONE HOLDER. 2. Remove soldering.
3-9 CHAPTER 3. REPAIR INSTRUCTION Fig. 3-9 BATTERY LOCK, BATTERY COVER 2.7 BATTERY LOCK, BATTERY COVER (1) BATTERY LOCK 1. Remove the BATTERY LOCK SPRING. 2. Remove the BATTERY LOCK. (2) BATTERY COVER 1. Remove the BATTERY COVER. 2. Remove the DC COUPLER COVER.
3-10 CHAPTER 3. REPAIR INSTRUCTION Fig. 3-10 OPERATION KEY UNIT, TRIPOD SOCKET 2.8 OPERATION KEY UNIT, TRIPOD SOCKET (1) OPERATION KEY UNIT 1. Remove the screw of h . 2. Remove the OPERATION KEY UNIT. CA UTION Be careful not to break the detection switch of the BATTERY COVER.
3-11 CHAPTER 3. REPAIR INSTRUCTION Fig. 3-11 LCD PANEL, BACKLIGHT UNIT (1)-2 h BA CK LIGHT UNIT (1)-3 LCD P ANEL Claws (1)-1 The BA CKLIGHT UNIT that is supplied as the ser vice par t has the protection sheet on the back. Remov e it. NOTE (Assembling) (1)-3 Remov e soldering 2.
3-12 CHAPTER 3. REPAIR INSTRUCTION Fig. 3-12 OPERATION PLATE, BATTERY BOX UNIT, CF UNIT Remov e soldering (1)-1 h (2)-1 j CF UNIT (3)-1 OPERA TION PLA TE (1)-2 BA TTER Y BO X UNIT (2)-3 (2)-2 Insulation tape DIABOND (1633G) Double-sided adhesiv e tape NO TE2 (Assembling) NO TE1 (Assembling) (3)-1 k 2.
3-13 CHAPTER 3. REPAIR INSTRUCTION Fig. 3-13 OPTICAL UNIT, FINDER UNIT (1)-1 n OPTICAL UNIT/FINDER UNIT (1)-2 OPTICAL UNIT (2)-3 (2)-3 FINDER UNIT (2)-1 Double-sided adhesive tape Double-sided adhesive tape NO TE2 (Assembling) NO TE1 (Assembling) (2)-2 o FINDER R UBBER 3.
3-14 CHAPTER 3. REPAIR INSTRUCTION Fig. 3-14 Assembling the FINDER UNIT 2.12 Assembling the FINDER UNIT (1) Assembling the FINDER UNIT 1. Apply the voltage (DC 2.5V) across the motor terminal to drive the motor until the motor stops and the BARREL fully comes out.
3-15 CHAPTER 3. REPAIR INSTRUCTION Fig. 3-15 OPTICAL UNIT 2.13 OPTICAL UNIT (1) OPTICAL UNIT 1. Remove the BARREL1 CAP by inserting tweezers or the like into its groove. 2. Remove the FRONT CAP. 3. Remove the BARRIER PLATE (2 pieces). 4. Remove the two claws and remove the BARRIER BASE.
3-16 CHAPTER 3. REPAIR INSTRUCTION Fig. 3-16 FLASH/DC UNIT, FLASH UNIT, ELECT CAPACITOR 2.14 FLASH/DC UNIT, FLASH UNIT, ELECT CAPACITOR (1) FLASH/DC UNIT 1. Remove the screw of h and two screws of l . 2. Remove the FLASH/DC UNIT. NO TE1 (Assembling) Please insert the projection of MAIN FRAME in the slot of FLASH/DC UNIT.
3-17 CHAPTER 3. REPAIR INSTRUCTION 2.15 Screw List 2.0mm MET AL M1.7 CD1-3109-000 a 2.0mm MET AL M1.7 CD1-3108-000 h 3.5mm MET AL M1.7 CD1-3110-000 c 2.8mm MET AL M1.7 (SELF T AP) CD1-3112-000 b 3.5mm MET AL M1.7 XA1-7170-357 g 4.0mm BLACK M1.7 (SELF T AP) XA4-9170-409 f 3.
3-18 CHAPTER 3. REPAIR INSTRUCTION 3. Adjustments 3.1 Replacement Parts and Adjustment Items PowerShot S230/DIGITAL IXUS v 3 requires electrical adjustments when certain parts are replaced. The table below indicates the adjustments required for the respective part replacements.
3-19 CHAPTER 3. REPAIR INSTRUCTION 3.2 Adjustment Tools The following tools are required for electrical adjustment. *1 Print the Zoom/AF Chart on the legal size paper from the “Zoom_AFChart_Legal.pdf ” ( in the folder of this CD-ROM, :AdjustChart).
3-20 CHAPTER 3. REPAIR INSTRUCTION 3.3 Before Starting Electrical Adjustments 3.3.1 TWAIN Driver Installation Install the USB Driver for Adjustment in the CD-ROM to PC. ( “ This Adjustment Software ” is impossible when the RS-232C TWAIN driver is used.
3-21 CHAPTER 3. REPAIR INSTRUCTION 4. When the dialog box below appears, click the “ Continue ” button. (In the case that you do not add a shortcut on desktop, remove clicking from the check box.) 3. When the dialog box below appears, click the button.
3-22 CHAPTER 3. REPAIR INSTRUCTION 3.3.3 Preparation Before starting up the Adjustment Software, follow the preparatory steps below: 1. Obtain all the tools necessary for the adjustment. 2. For the Optical Unit Adjustment, jot down the data written on the Optical Unit.
3-23 CHAPTER 3. REPAIR INSTRUCTION 3.3.4 Starting up the Adjustment Software After completing the preparatory steps, click Start and move the cursor to Program; then select Canon Digital Camera and click PowerShot S230/DIGITAL IXUS V 3 Adjustment. 3.3.
3-24 CHAPTER 3. REPAIR INSTRUCTION 1 Click the “ Calibration ” button. 3.4 Calibration 3.4.1 Calibration ■ Tools Used • Personal Computer • Brightness Box (light source A) • FL-W Filter .
3-25 CHAPTER 3. REPAIR INSTRUCTION 5 1. When the message on the right appears, Set the Brightness Box to EV15 and attach the ND-8 Filter while setting the C-12 Filter between the lens. 2. Click the “ Check ” button. 3. Check the Brightness level if it is within 0 ± 5.
3-26 CHAPTER 3. REPAIR INSTRUCTION Power Source Stand Color Viewer Personal Computer CAMERA BODY W-10 Filter Power Source Stand Color Viewer Personal Computer CAMERA BODY C-12 Filter FL-W Filter 8 When the message on the right appears go to 9. 9 1. Remove the ND-2 Filter.
3-27 CHAPTER 3. REPAIR INSTRUCTION Color Viewer Color Bar Chart Personal Computer CAMERA BODY Power Source Stand ND-4 Filter 12 When the message on the right appears go to 13. 13 1 . Attach the Color Bar Chart to the Color Viewer. 2. Place the camera so that the Viewing image of the color bar chart is the full of LCD with the ND-4 Filter attached.
3-28 CHAPTER 3. REPAIR INSTRUCTION 16 When the message on the right appears, click the “ FINISH ” button. (This ends the “ Calibration ” .).
3-29 CHAPTER 3. REPAIR INSTRUCTION Personal Computer Power Source Brightness Box CAMERA BODY C-12 Filter 3.5 Adjustment Procedure 3.5.1 CCD Adjustment ■ Tools Used • Personal Computer • DC Coupl.
3-30 CHAPTER 3. REPAIR INSTRUCTION 4 When the message on the right appears, Set the Brightness Box to EV15 while setting the C-12 Filter between the lens. Click the “ ADJUST ” button. 5 When the message on the right appears, click the “ FINISH ” button.
3-31 CHAPTER 3. REPAIR INSTRUCTION Personal Computer Power Source 52.5cm Zoom/AF Chart CAMERA BODY Tripod 3.5.2 Optical Unit Adjustment ■ Tools Used • Personal Computer • DC Coupler DR-500 • A.
3-32 CHAPTER 3. REPAIR INSTRUCTION 4 When the message on the right appears, click the “ ADJUST ” button. 5 When the message on the right appears, click the “ FINISH ” button.
3-33 CHAPTER 3. REPAIR INSTRUCTION Power Source Stand Color Viewer Personal Computer CAMERA BODY ND-2 Filter 3.5.3 Imaging Process Adjustment ■ Tools Used • Personal Computer • Color Viewer (5600 ° K) • Adjustment Software • W-10 Filter (2 pcs.
3-34 CHAPTER 3. REPAIR INSTRUCTION 5 1. Remove the ND-2 Filter. 2. Attach the two W-10 Filters between the Lens and the Color Viewer. Place the camera so that the lens is set against the center part of the Color Viewer. 3. Click the “ ADJUST ” button.
3-35 CHAPTER 3. REPAIR INSTRUCTION 8 When the message on the right appears, click the “ FINISH ” button. (This ends the “ Imaging Process ” Adjustment.
3-36 CHAPTER 3. REPAIR INSTRUCTION 3.5.4 Color Adjustment ■ Tools Used • Personal Computer • INTERFACE CABLE IFC-200PCU • Adjustment Software • Color Viewer (5600 ° K) • Compact Power Adapter CA-PS500 • Color Bar Chart • AC Cable • ND-4 Filter • DC Coupler DR-500 1 Click the “ Color ” button.
3-37 CHAPTER 3. REPAIR INSTRUCTION 5 Check “ Yellow and Red ” , and click the “ OK ” button. If these data are within specifications, go to 7. * Specification Ave_Cr = Reference Camera ± 10 Ave_Cb = Reference Camera ± 10 6 1. Confirm to see that the image on the PC moni- tor satisfies the specifications.
3-38 CHAPTER 3. REPAIR INSTRUCTION 3.5.5 Pixel Dot Adjustment ■ Tools Used • Personal Computer • INTERFACE CABLE IFC-200PCU • Adjustment Software • Brightness Box (Light source A) • Compac.
3-39 CHAPTER 3. REPAIR INSTRUCTION 4 1. When the message on the right appears, cover the camera with the Light-Shielding Cloth so that the no light reasons the CCD. 2. Click the “ ADJUST ” button. 5 When the message on the right appears, click the “ FINISH ” button.
3-40 CHAPTER 3. REPAIR INSTRUCTION 3.5.6 Flash Adjustment ■ Tools Used • Personal Computer • DC Coupler DR-500 • Adjustment Software • INTERFACE CABLE IFC-200PCU • Compact Power Adapter CA-PS500 • 18% Gray Chart • AC Cable • Tripod 1 Click the “Flash” button.
3-41 CHAPTER 3. REPAIR INSTRUCTION 4 When the message on the right appears, click the “ FINISH ” button. (This ends the “ Flash ” Adjustment.).
3-42 CHAPTER 3. REPAIR INSTRUCTION 3.5.7 Checking of sound recording/output It is not required to adjust the recording/output (volume, etc.) of sound. Check the camera if the sound is recorded/play-backed properly.
CHAPTER 4. PARTS CATALOG CONTENTS PowerShot S230/DIGITAL IXUS v 3 /IXY DIGITAL 320 Casing Parts --------------------------------------------------------------------------------------------------------.
.
PowerShot S230 DIGITAL IXUS v 3 IXY DIGITAL 320 Pg1 Casing Parts 1 18 5 6 7 8 16 3 4 10 11 12 14 13 14 2 9 17 17 15 15.
PARTS LIST SYMBOL PARTS NO. CLASS QTY DESCRIPTION REMARKS PowerShot S230 DIGITAL IXUS v 3 IXY DIGITAL 320 Pg1 1 CM1-1456-000 B 1 FRONT COVER UNIT IXY DIGITAL 320 CM1-1457-000 B 1 FRONT COVER UNIT Powe.
PowerShot S230 DIGITAL IXUS v 3 IXY DIGITAL 320 Pg2 14 14 2 4 3 5 6 8 13 10 9 13 12 11 1 7 13 Internal Parts-1.
PARTS LIST SYMBOL PARTS NO. CLASS QTY DESCRIPTION REMARKS PowerShot S230 DIGITAL IXUS v 3 IXY DIGITAL 320 Pg2 1 CM1-1571-000 C 1 OPERATION KEY UNIT 2 CL1-1113-000 C 1 SHEET, SHIELD 3 WK1-5140-000 C 1 .
PowerShot S230 DIGITAL IXUS v 3 IXY DIGITAL 320 Pg3 1 8 20 10 11 12 13 9 14 6 5 19 15 7 2 17 18 3 4 16 18 See Pg4 Internal Parts-2.
PARTS LIST SYMBOL PARTS NO. CLASS QTY DESCRIPTION REMARKS PowerShot S230 DIGITAL IXUS v 3 IXY DIGITAL 320 Pg3 1 CM1-1447-000 C 1 FLASH/DC UNIT 2 CD1-4444-000 C 1 SHEET, NOISE ABSORPTION 3 CM1-1342-000 C 1 FLASH UNIT 4 CK9-0308-000 C 1 CAPACITOR, ELECT.
PowerShot S230 DIGITAL IXUS v 3 IXY DIGITAL 320 Pg4 1 2 3 3 4 5 6 7 8 9 10 11 OPTICAL UNIT.
PARTS LIST SYMBOL PARTS NO. CLASS QTY DESCRIPTION REMARKS PowerShot S230 DIGITAL IXUS v 3 IXY DIGITAL 320 Pg4 1 CD1-3033-000 B 1 CAP, BARREL1 2 CD1-3034-010 B 1 CAP, FRONT 3 CD1-4171-000 B 2 PLATE, BA.
PowerShot S230 DIGITAL IXUS v 3 IXY DIGITAL 320 Pg5 N.S l : N.S Stand for No Stock (Product available) Accessories- 1 Wrist Strap WS-110 TERMINAL COVER NB-1LH USB Interface Cable IFC-200PCU AV Cable AVC-DC200 Battery Charger CB-2LS/2LSE Canon Digital Camera Solution Disk, ArcSoft Camera Suite Disk DC Coupler DR-500 AC Cable N.
PARTS LIST SYMBOL PARTS NO. CLASS QTY DESCRIPTION REMARKS PowerShot S230 DIGITAL IXUS v 3 IXY DIGITAL 320 Pg5 1 CD1-3113-000 B 1 WRIST STRAP WS-110 2 C84-1132-000 S 1 CD-ROM, SOLUTION VER.11 (J/E) FOR JAPAN, ASIA, AUSTRALIA C84-1138-000 S 1 CD-ROM, SOLUTION VER.
PowerShot S230 DIGITAL IXUS v 3 IXY DIGITAL 320 Pg6 N.S l : N.S Stand for No Stock (Product available) Accessories- 2 Waterproof Seal Silicone Grease Anti-Condensation Solution Neck Strap Wrist Strap Diffusion Plate Unit Waterproof Case WP-DC 600 N.S N.
PARTS LIST SYMBOL PARTS NO. CLASS QTY DESCRIPTION REMARKS PowerShot S230 DIGITAL IXUS v 3 IXY DIGITAL 320 Pg6 1 CY1-6168-000 C 10 E RING 2 CY1-6169-000 C 6 CAP, BUTTON 3 CY1-6171-000 C 1 BUCKLE ASS .
PowerShot S230 DIGITAL IXUS v 3 IXY DIGITAL 320 Pg7 Accessories- 3 Camera User Guide Software Starter Guide System Map 1 2 3 Quick Start Guide 4.
PARTS LIST SYMBOL PARTS NO. CLASS QTY DESCRIPTION REMARKS PowerShot S230 DIGITAL IXUS v 3 IXY DIGITAL 320 Pg7 1 CDI-E072-000 S 1 I.BOOK(E) PS S230/IXUS V3 FOR USA, CANADA, ASIA, AUSTRALIA CDI-S062-000 S 1 I.BOOK(S) PS S230 FOR USA CDI-J063-000 S 1 I.BOOK(J) IXY DIGITAL 320 FOR JAPAN CDI-F061-000 S 1 I.
Service Tools PowerShot S230 DIGITAL IXUS v 3 IXY DIGITAL 320 Pg8 DIA BOND NO.1663G BLACK W-10 Filter 18% Gray Chart HANARL FL-778 SERVICE MANUAL CD-ROM Adhesive Tape SONY T4000 Adhesive Tape 3M NO.
PARTS LIST SYMBOL PARTS NO. CLASS QTY DESCRIPTION REMARKS PowerShot S230 DIGITAL IXUS v 3 IXY DIGITAL 320 Pg8 1 CY9-8129-000 Y 1 BOND, DIA BOND NO.1663G BLACK 2 CY4-6012-000 Y 1 ADHESIVE TAPE, SONY T4000 6mm × 50m roll 3 CY4-6018-000 Y 1 ADHESIVE TAPE, 3M NO.
CHAPTER 5. DIAGRAMS CONTENTS 1. INTERCONNECTION DIAGRAM 2. BLOCK DIAGRAMS 2-1. OVERALL 2-2. MAIN PCB ASS’Y (1/3) 2-3. MAIN PCB ASS’Y (2/3) 2-4. MAIN PCB ASS’Y (3/3) 2-5. FLASH/DC UNIT 2-6. Abbreviation in Block Diagrams 3. P.C.B. DIAGRAMS 3-1. MAIN PCB ASS’Y 3-2.
.
C CANON INC., 2002 01 OCTOBER, 2002 1. INTERCONNECTION DIAGRAM 1 11 20 10 1 25 1 15 16 30 26 50 1 33 32 CN1901 CN1004 1 15 16 30 CN101 CN1005 1 25 26 50 CN1301 1 10 CN1002 1 24 1 11 20 10 CN1003 CN150.
C CANON INC., 2002 01 OCTOBER, 2002 MAIN PCB ASS’Y CONNECTORS CN1002 1 SCAN 2 BTOP 3U P 4 LEFT 5 LED_POWERAN 6 LED_POWER 7 DOWN 8 RIGHT 9 EXP/WB/ERASE 10 DISP 11 MINUS 12 SET 13 M_GND 14 M_GND CN100.
C CANON INC., 2002 01 OCTOBER, 2002 2. BLOCK DIAGRAMS 2.1 OVERALL Button BA TTERY A V OUT FLASH HV/OSC/XE_Drive VCC 1 VCC 1L VCC 1A CCD Sensor Zoom Motor Motor Driver IRIS Motor AF Motor SHUTER Motor .
C CANON INC., 2002 01 OCTOBER, 2002 2.2 MAIN PCB ASS’Y (1/3) MAIN PCB ASS ’ Y (1/3) CCD FPC OPTICAL UNIT 1/2 IC1011 (1/3) Digital Signal Processing IC T8F80XB-0001 VCC1 VDD DAOUT 10 D0 ı D9 P3_6 .
C CANON INC., 2002 01 OCTOBER, 2002 2.3 MAIN PCB ASS ’ Y (2/3) MAIN PCB ASS ’ Y (2/3) OPT FPC OPTICAL UNIT 2/2 20 CPU_A_1-20 CPU_A_16-19 16 A0 ı A19 DQ0 ı DQ15 CPUAD_0 ı CPUAD_15 CPUADR_0 ı CP.
C CANON INC., 2002 01 OCTOBER, 2002 2.4 MAIN PCB ASS ’ Y (3/3) MAIN PCB ASS ’ Y (3/3) 16 6 17 13 12 14 18 19 10 CN1003 VCC1 LED_GREEN LED_ORANGE LED_MACRO POWER SW1 SW2 TELE IC1012 16M SDRAM K4S28.
C CANON INC., 2002 01 OCTOBER, 2002 2.5 FLASH/DC UNIT FLASH/DC UNIT From BA TTERY BOX UNIT CN101 To MAIN PCB ASS ’ Y VCHGL VL LED_BL E1P LA T EFCHG STSP 5 8 9 23 24 E1P LA T 4 VCC2AFE VEE2 2 21 E3 L.
2.6 Abbreviation in Block Diagrams Abbreviation Nominal name Description ADC Analog-to-Digital (A/D) Converter AE Automatic Exposure control AF Automatic Focussing control AND Logic AND circuit R-Y/B-.
C CANON INC., 2002 01 OCTOBER, 2002 3. P.C.B. DIAGRAMS 3.1 MAIN PCB ASS ’ Y MAIN PCB ASS ’ Y (SOLDERING SIDE) MAIN PCB ASS ’ Y (COMPONENT SIDE).
C CANON INC., 2002 01 OCTOBER, 2002 3.2 FLASH/DC UNIT FLASH/DC UNIT (SOLDERING SIDE) FLASH/DC UNIT (COMPONENT SIDE).
C CANON INC., 2002 01 OCTOBER, 2002 3.3 OPTICAL UNIT.
C CANON INC., 2002 01 OCTOBER, 2002 3.4 BATTERY BOX UNIT.
C CANON INC., 2002 01 OCTOBER, 2002 3.5 CF UNIT.
C CANON INC., 2002 01 OCTOBER, 2002 3.6 OPERATION KEY UNIT.
Ho w to print out the Zoom/AF Char t The lar ge materials such as “Zoom/AF Chart” that occupy a page of lar ge size, can be di vided into se veral smaller pa ges using “Graphic Select T ool” for printing the entire page. < Pr ocedures > 1.
PowerShot S230/DIGITAL IXUS v 3 / IXY DIGITAL 320 Zoom/AF Chart.
✂.
PowerShot S230/DIGITAL IXUS v 3 /IXY DIGITAL 320 Zoom/AF Chart.
Dimensions 519.94mm 131.53mm 412.91mm 311.99mm 157.48mm 157.52mm 65.90mm 262.53mm 209.54mm 196.90mm 389.95mm.
Un punto importante, dopo l’acquisto del dispositivo (o anche prima di acquisto) è quello di leggere il manuale. Dobbiamo farlo per diversi motivi semplici:
Se non hai ancora comprato il Canon S230 è un buon momento per familiarizzare con i dati di base del prodotto. Prime consultare le pagine iniziali del manuale d’uso, che si trova al di sopra. Dovresti trovare lì i dati tecnici più importanti del Canon S230 - in questo modo è possibile verificare se l’apparecchio soddisfa le tue esigenze. Esplorando le pagine segenti del manuali d’uso Canon S230 imparerai tutte le caratteristiche del prodotto e le informazioni sul suo funzionamento. Le informazioni sul Canon S230 ti aiuteranno sicuramente a prendere una decisione relativa all’acquisto.
In una situazione in cui hai già il Canon S230, ma non hai ancora letto il manuale d’uso, dovresti farlo per le ragioni sopra descritte. Saprai quindi se hai correttamente usato le funzioni disponibili, e se hai commesso errori che possono ridurre la durata di vita del Canon S230.
Tuttavia, uno dei ruoli più importanti per l’utente svolti dal manuale d’uso è quello di aiutare a risolvere i problemi con il Canon S230. Quasi sempre, ci troverai Troubleshooting, cioè i guasti più frequenti e malfunzionamenti del dispositivo Canon S230 insieme con le istruzioni su come risolverli. Anche se non si riesci a risolvere il problema, il manuale d’uso ti mostrerà il percorso di ulteriori procedimenti – il contatto con il centro servizio clienti o il servizio più vicino.
