Manuale d’uso / di manutenzione del prodotto FPM-3150 Series del fabbricante Advantech
Vai alla pagina of 48
FPM-3150 Series Flat Panel Monitor with 15" Color TFT/LCD Display enchanced version User Manual.
FPM-3150 Series User Manual ii Copyright Notice This document is copyrighted by Advantech Co., Ltd. All rights are reserved. Advantech Co., Ltd. reserves the right to ma ke improvements to the products described in this manual at any time. Specifications are thus subject to change without notice.
iii Product W arranty (1 yea r) Advantech warrants to you, the original purchaser , that each of its prod- ucts will be free from defects in ma terials and workman ship for one year from the date of purchase.
FPM-3150 Series User Manual iv FCC Class B This equipment has been tested and f ound to comply with the li mits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These li mits are designed to provide reasonable protection against harmful interfer- ence when the equipment is operated in a residential environment.
v Packing List Before installing yo ur equipment, mak e sure that the foll owing materials have been received: • FPM-3150 Series flat panel monitor • Accessory pack, including: - AC/DC adapter - AC/DC power adapter bracket - DC in Power Cord Bracket x 1 piece - V ideo Signal Cable, 1.
FPM-3150 Series User Manual vi Safety Instructions 1. Read these safety instructions carefully . 2. Keep this User's Manual for later reference. 3. Disconnect this e quipment from any AC outlet before cleaning. Use a damp cloth. Do not use liquid or spray detergents for clean- ing.
vii 15. DO NOT LEA VE THIS EQUIPMENT IN AN UNCONTROLLED ENVIRONMENT WHERE THE STORAGE TEMPERA TURE IS BELOW -20° C (-4° F) OR ABOVE 60° C (140° F). THIS MA Y DAMAGE THE EQUIPMENT . The sound pressure level at the oper ator's position according to IEC 704- 1:1982 is no more than 70dB(A).
FPM-3150 Series User Manual viii 12. Durch die Lüftungsöffnungen dürfen niemals Gegenstände oder Flüssigkeiten in das Gerät g elangen. Dies könnte eine n Brand bzw .
ix Table of Contents Contents Chapter 1 Introd uction ..................................................... 2 1.1 Introduction . .............. ........... .............. ......................... ............... . 2 1.2 Specifications.... ...........
FPM-3150 Series User Manual x Appendix C OSD................................................................. 36 C.1 Keypad Interface................ .............. .......................... .............. .. 36 C.2 Power Indicator LED Status .......
2 CHAPTER 1 Introduction This chapter includes: • Introduction • Specifications • LCD Specification • Power Consumption • Connectors • Dimensions.
FPM-3150 Series User Manual 2 Chapter 1 Introduction 1.1 Introduction Advantech's FPM-3150 is a 15" color TFT LCD flat panel monito r built specifically for industrial appl ications. W ith the opt ional touchscreen, FPM-3150 is an excellent and user-friendly system control interface.
3 Chapter 1 T ouchscreen (Option al) • Ty p e : 8 wire, analog resistive • Resolution: 1024 x 1024 • Light T ransmission: 75% (Gouge Hardness is greater tahn 4H per ASTM D3363-92 for HCC01, HCG1.
FPM-3150 Series User Manual 4 1.5 Connectors The following connectors are situ ated on the left hand side of the FPM-3150 Series: VGA Port (DB-15) This DB-15 connector can be connected to the system via the external 15-pin DB-15 connector locatd on th e left side of the system unit.
5 Chapter 1 1.6 Dimensions Figure 1.1: FPM-3150G Dimensions.
FPM-3150 Series User Manual 6.
2 CHAPTER 2 Mounting • W all Mou nting • Panel Mounting • Rack Mounting • Desktop Mounting • Swing Arm Mounting.
FPM-3150 Series User Manual 8 Chapter 2 Mounting 2.1 Mounting the Monitor The FPM-3150 Series can be mounted in many different ways. The ver- satility of the FPM-3150 mounts enable it to be mounted on your desk or anywhere else. 2.1.1 W all Mounting FPM-3150 can be mounted directly on a wall wit h panel mounting brack- ets.
9 Chapter 2 2.1.2 Panel Mounting If you need to install the FPM-3150 se ries in a panel, please release the mounting brack ets by detaching four screws on rear side and fix them o n the top and bottom wit h screws.
FPM-3150 Series User Manual 10 2.1.3 Rack Mounting (Optional) If you need to install the FPM-3150 on a rack, you m ust order the rack mount kit for FPM-3150 (Part Number is FPM-3150Rack-MT). Attach the two rack mounting brackets on each side of FPM-3150 with 12 screws, then affix the monitor in the rack.
11 Chapter 2 2.2 Desktop, Swing-ARM for FPM-3150 The FPM-3150 Series can be mounted in other ways. These is a desktop stand for desktop use and it can also be attached to a swing-arm bracket. 2.2.1 Desktop St and The panel-mount bracket is at tached to the rear of the FPM-3150 to become a desktop stand.
FPM-3150 Series User Manual 12 2.2.2 Swing-ARM (VESA Compliant) FPM-3150 has been designed with support fo r the VESA Arm standard. Refer to figure 2.5. Detach the mounting brackets on the rear side, and attach the FPM-3150 onto the VESA ARM Mount . Figure 2.
2 APPENDIX A T ouchscreen This appendix contains informatio n on the touchscreen, its installation and configuration..
FPM-3150 Series User Manual 14 Appendix A T ouchscreen A.1 Introduction The FPM-3150 Series’ optional tou chscreen uses advanced 8-wire resis- tive technology .
15 Appendix A Optical • Vi s i b l e l i g h t transmission: 75% typical (>74% @ 550 nm test) • Clarity: Clear Finish - 25%, Antiglare Finish - 15% Sensor board • Chemical strengthened glass with 4 H hardness stand ard.
FPM-3150 Series User Manual 16 Before installing t he W indows 2000/XP driver software, you must have the W indow s 2000/XP system installed and running on yo ur computer . Y ou must also have one of the follo wing PenMount Serial Interface con- troller boards installed: 90A4, 90 26B, 9036 or 9084.
17 Appendix A 2. Insert the PenMount Driver CD-ROM. Go to the Windows 2000- XP Driver folder . Click setup .exe . 3. The screen displays the instal lation wizard for the PenMount soft- ware.
FPM-3150 Series User Manual 18 4. A License Agreement appears. Click “I accept…” and “Next” 5. The “Ready to Install the Program” screen appears.
19 Appendix A 6. The next screen is “Hardware In stallation.” Select “Continue Any- way .” 7. The “InstallShield W izard Comple ted” appears.
FPM-3150 Series User Manual 20 A.4 Configuring PenM ount Windows 2000/XP Driver Upon rebooting, the computer aut omatically finds the new 9000 control- ler board. The touch screen is connected but not calibrated . Follow the procedures b elow to carry out calibration.
21 Appendix A NOTE: The older the touc h screen, th e more Advanced Mode calibration points you need for an accurate calib ration. Use a styl us during Advanced Calibration for gr eater accuracy .
FPM-3150 Series User Manual 22.
23 Appendix A Plot Calibra- tion Data Check this function and a touch panel linearity com- parison graph appears when you have finished Advanced Calibration. The blue line s show linearity before calibrati on and black line s show linearity after calibration.
FPM-3150 Series User Manual 24 Draw T ests or demonstrat es the PenMount touch screen operation. Th e display shows touch location. Click Draw to start. T ouch the screen with your finger or a stylus and the drawing scr een registers touch activity such left, right, up, down, pen up, and pen down.
25 Appendix A Multiple Monitors Multiple Monitors sup ports from two to six touch screen display s for one system. The PenMount drivers for W indows 2000/XP support Multip le Monitors. This function supports from two to six tou ch screen displays for one system.
FPM-3150 Series User Manual 26 2. When the mapping screen message appears, click OK. 3. T ouch each screen as it displays “Please touch this monitor .
27 Appendix A 4. T ouching all screens completes the mapping and the desktop reap- pears on the monitors. 5. Select a display and execute the ‘Calibration’ function. A message to start calibration appears. Click OK. 6. “T ouch this screen to start its calibration” appears on one of the screens.
FPM-3150 Series User Manual 28 Option This panel function suppo rts two modes—Operation Mode and Beep Sound Mode—which allow configu rati on for specific touch screen appli- cations, such as point-of-sales (POS) terminals. NOTE: 1. If you used a single VGA output for multiple monitors, please do not use the Multiple Monitors function.
29 Appendix A About This panel displays inform ation about th e PenMount controller and d river version..
FPM-3150 Series User Manual 30 A.4.2 PenMount Monitor Menu Icon The PenMount monitor icon (PM) appears in the menu bar of Windows 2000/XP system when you turn on PenMount Mon itor in PenMount Util- ities. PenMount Monitor has the follo wing functions.
31 Appendix A A.4.3 PenMount Rot ating Functions The PenMount driver for W indows 2000/XP suppo rts several display rotating software packages. Please s ee Chapter 5 for more informat ion.
FPM-3150 Series User Manual 32 A.5 Uninst all the PenMou nt Windows 2000/XP driver 1. Exit the PenMou nt monitor (PM) in the menu bar . 2. Go to Settings, then Control Panel, and then clic k Add/Remove program. Select PenMount DMC900 0 and click the Add/Remove button.
2 APPENDIX B St andard T iming Set Serial Dat a for Exp ansion.
FPM-3150 Series User Manual 34 Appendix B St andard T iming Set Serial Dat a for Exp ansion B.1 Setting serial dat a for expansion The twelve kinds of timin gs below are already programmed in this mod- ule. The input synchronous signals are automatically recog nized.
2 APPENDIX C OSD • OSD Selection • Keypad Interface • OSD Function.
FPM-3150 Series User Manual 36 Appendix C OSD C.1 Keyp ad Interface C.2 Power Indicator LED St atus The keypad interface provides a driver for a dual color LED to indicate status. (1) Green: COMMON board detects a input signal and sends output sig- nal to LCD panel.
37 Appendix C C.3 OSD Function Each selected value is stored into LCD memory after SEL sig nal input or time out. The stored values are not aff ected if the power is turned off. But the selected value is not available in case a selected mode is changed before time out or power is turned o ff before time out.
FPM-3150 Series User Manual 38.
Un punto importante, dopo l’acquisto del dispositivo (o anche prima di acquisto) è quello di leggere il manuale. Dobbiamo farlo per diversi motivi semplici:
Se non hai ancora comprato il Advantech FPM-3150 Series è un buon momento per familiarizzare con i dati di base del prodotto. Prime consultare le pagine iniziali del manuale d’uso, che si trova al di sopra. Dovresti trovare lì i dati tecnici più importanti del Advantech FPM-3150 Series - in questo modo è possibile verificare se l’apparecchio soddisfa le tue esigenze. Esplorando le pagine segenti del manuali d’uso Advantech FPM-3150 Series imparerai tutte le caratteristiche del prodotto e le informazioni sul suo funzionamento. Le informazioni sul Advantech FPM-3150 Series ti aiuteranno sicuramente a prendere una decisione relativa all’acquisto.
In una situazione in cui hai già il Advantech FPM-3150 Series, ma non hai ancora letto il manuale d’uso, dovresti farlo per le ragioni sopra descritte. Saprai quindi se hai correttamente usato le funzioni disponibili, e se hai commesso errori che possono ridurre la durata di vita del Advantech FPM-3150 Series.
Tuttavia, uno dei ruoli più importanti per l’utente svolti dal manuale d’uso è quello di aiutare a risolvere i problemi con il Advantech FPM-3150 Series. Quasi sempre, ci troverai Troubleshooting, cioè i guasti più frequenti e malfunzionamenti del dispositivo Advantech FPM-3150 Series insieme con le istruzioni su come risolverli. Anche se non si riesci a risolvere il problema, il manuale d’uso ti mostrerà il percorso di ulteriori procedimenti – il contatto con il centro servizio clienti o il servizio più vicino.
