Manuale d’uso / di manutenzione del prodotto 2297B002 del fabbricante Canon
Vai alla pagina of 17
EF200mm f/2L IS USM Instruction ENG C OP Y.
ENG-1 Dedicated to EOS cameras, the EF200mm f/2L IS USM is a high-performance telephoto lens equipped with an Image Stabilizer . • "IS" stands for Image Stabiliz er . • "USM" stands for Ultr asonic Motor. Features 1. The Image Stabilizer giv es the equivalent effect of a shutter speed fiv e stops f aster*.
ENG-2 a Safety Precautions a Safety Precautions • Do not look at the sun or a bright light source through the lens or camera. Doing so could result in loss of vision.
ENG-3 Nomenc lature Orientation locking knob ( → 14) Lens mount index ( → 4) Distance scale ( → 6) Drop-in filter ( → 12) Strap mount ( → 4) Contacts ( → 4) Focus mode switch ( → 5) Focu.
ENG-4 • After detaching the lens, place the lens with the rear end up to prev ent the lens surface and electrical contacts from getting scratched. • If the contacts get soiled, scratched, or hav e fingerpr ints on them, corrosion or faulty connections can result.
ENG-5 After autofocusing in ONE SHO T AF mode, f ocus manually by pressing the shutter b utton halfway and turning the focusing ring. (Full-time manual f ocus) Y ou can set the focusing distance range to 1.9 m/6.2 ft. to infinity or 3.5 m/11.5 ft. to infinity .
ENG-6 4. Infinity Compensation Mark Infinity compensation mark Distance index To compensate f or shifting of the infinity focus point that results from changes in temperature. The infinity position at normal temperature is the point at which the vertical line of the L mar k is aligned with the distance indicator on the distance scale.
ENG-7 During autofocus operation, y ou can press the AF stop button to temporarily pause autof ocus. If the shutter button is still pressed halfw ay when the AF stop button is released, autof ocusing will continue as bef ore.
ENG-8 By presetting any f ocusing distance, you can instantly focus at that point e v en while you are shooting a different subject. This function operates in both the AF and MF modes. How to Focus at the Preset Distance While turning the playback ring to the left or r ight, press the shutter button completely .
ENG-9 9. Image Stabilizer Settings Y ou can use the image stabilizer in AF or MF mode. Select the stabilizer mode. • MODE 1: Corrects vibrations in all directions.
ENG-10 10. Tips on Using the Image Stabilizer ● MODE 1 ● MODE 2 The image stabilizer in this lens is eff ective f or hand-held shots under the follo wing conditions. • In semi-darkened areas such as indoors or outdoors at night. • In locations where flash photograph y is prohibited, such as ar t museums and theater stages.
ENG-11 Tips on Using the Image Stabilizer • The Image Stabilizer cannot compensate f or a b lurred shot caused b y a subject that moved. • Set the ST ABILIZER switch to when you are taking pictures using the Bulb setting (long e xposures). If the ST ABILIZER switch is set to , the image stabilizer function ma y introduce errors.
ENG-12 11. Dr op-In Filters The lens comes with the drop-in Gelatin Filter Holder 52 holding a glass filter . The holder accepts commercially-av ailable gelatin filters. 14mm 14mm 47mm 47mm Removing and Installing To remo ve the drop-in filter , press in the left and r ight lock b uttons and pull the filter holder straight up out of the slot.
ENG-13 12. Extenders (Sold separately) • First attach the Extender to the lens, then attach the lens to the camera. Detach it from the camera in the re verse order . If you attach the lens to the camera first, misoperation may occur . • Only one Extender can be attached to the lens and camera.
ENG-14 Camera-to-Subject Magnification Distance (mm) Near F ar Near F ar EF12 II 1380 3397 0.19 × 0.06 × EF25 II 1092 1716 0.26 × 0.14 × 15. Case Belt Ke yhole Lever Lid Y ou can attach Extension T ube EF12 II or EF25 II for magnified shots . The shooting distance and magnification are shown below .
ENG-15 Specifications • The lens length is measured from the mount surface to the front end of the lens. Add 26.5 mm when including the lens cap and dust cap. • The size and weight listed are f or the lens only , except as indicated. • Closeup Lenses 250D/500D cannot be attached.
© CANON INC. 2008 CT1-7580-003 2009.7 C OP Y.
Un punto importante, dopo l’acquisto del dispositivo (o anche prima di acquisto) è quello di leggere il manuale. Dobbiamo farlo per diversi motivi semplici:
Se non hai ancora comprato il Canon 2297B002 è un buon momento per familiarizzare con i dati di base del prodotto. Prime consultare le pagine iniziali del manuale d’uso, che si trova al di sopra. Dovresti trovare lì i dati tecnici più importanti del Canon 2297B002 - in questo modo è possibile verificare se l’apparecchio soddisfa le tue esigenze. Esplorando le pagine segenti del manuali d’uso Canon 2297B002 imparerai tutte le caratteristiche del prodotto e le informazioni sul suo funzionamento. Le informazioni sul Canon 2297B002 ti aiuteranno sicuramente a prendere una decisione relativa all’acquisto.
In una situazione in cui hai già il Canon 2297B002, ma non hai ancora letto il manuale d’uso, dovresti farlo per le ragioni sopra descritte. Saprai quindi se hai correttamente usato le funzioni disponibili, e se hai commesso errori che possono ridurre la durata di vita del Canon 2297B002.
Tuttavia, uno dei ruoli più importanti per l’utente svolti dal manuale d’uso è quello di aiutare a risolvere i problemi con il Canon 2297B002. Quasi sempre, ci troverai Troubleshooting, cioè i guasti più frequenti e malfunzionamenti del dispositivo Canon 2297B002 insieme con le istruzioni su come risolverli. Anche se non si riesci a risolvere il problema, il manuale d’uso ti mostrerà il percorso di ulteriori procedimenti – il contatto con il centro servizio clienti o il servizio più vicino.