Manuale d’uso / di manutenzione del prodotto Total Access 850 del fabbricante ADTRAN
Vai alla pagina of 292
64203376L1- 1B August 2004 T OT AL ACCESS 850 System Manual 1200375L1 T otal Access 850 Chassis 1200373L1 T1 Bank Controller Unit (BCU) 1200373L2 T1 BCU with DSX Port 4203376L1#TDM T 1 Router Control .
Trademarks Total Access 850 System Manual 2 © 2004 ADTRAN, Inc. 64203376L1-1B T rademarks Any brand names and produ ct names included in this manual ar e trademarks, registered trad emarks, or trade names of their respective holders. T otal Access ® is a registered trad emark of ADTRAN, Inc.
Total Access 850 System Manual Revision History 64203376L1-1B © 2004 ADTRAN, Inc. 3 Revision History Conventions Document Revision Date Description of Changes A April 2004 This is the first issue of this manual. The previous version o f this product was covere d under document 64200376 L1-1.
Safety Instructions Total Access 850 System Manual 4 © 2004 ADTRAN, Inc. 64203376L1-1B Safety Instructions When using your telephone equi pment, please follow these basic safety precautions to reduce the risk of fire, electrical shock, or personal injury: 1.
Total Access 850 System Man ual FCC-Required Information 64203376L1-1B © 2004 ADTRAN, Inc. 5 FCC-Required Information FCC regulations require that the following informat ion be provi ded in th is manual: 1. This equipment complies with Part 68 of the FCC rules and requirement s adopted by ACT A.
FCC-Required Information Total Access 85 0 System Manual 6 © 2004 ADTRAN, Inc. 64203376L1-1B Federal Communications Co mmission Radio Frequency Inte rference S t atement This equipment has been tested and found to comply with the limits for a Class A digit al device, pursuant to Part 15 of the FCC Rules.
Total Access 850 System Manual Affidavit Requi rements for Connection to Digita l Services 64203376L1-1B © 2004 ADTRAN, Inc. 7 Affidavit Requirements for C onnection to Di git al Services • An affi.
Affidavit Requir ements for Connection to Digital Servic es Total Access 850 System Manual 8 © 2004 ADTRAN, Inc. 64203376L1-1B A FFIDAVIT FOR C ONNECTION OF C US TOMER P REMISES E QUIPMENT TO 1.
Total Access 850 System Manual Industry Canada Compliance Information 64203376L1-1B © 2004 ADTRAN, Inc. 9 Industry Canada Compliance Information Before installing this equipment, users should ensure that it is permissible to be connected to the f acilities of the local telecommunications co mpany .
Product Warranty Total Access 850 System Manual 10 © 2004 ADTRAN, Inc. 64203376L1-1B Product W arranty ADTRAN will repair and return this p roduct within the warranty period if it does no t meet its publis hed specifications or fails while in service.
Total Access 850 System Manual Customer Service, Product Suppo rt Information, an d Training 64203376L1-1B © 2004 ADTRAN, Inc. 11 When needed, further pre-sales assistance is availabl e by calling our Applications Engineering De part men t.
Customer Service, Product Support Informa tion, and Training Total Access 850 System Ma nual 12 © 2004 ADTRAN, Inc. 64203376L1-1B Post-Sale Support Y our resel ler should serve as the first point of contact for support.
Total Access 850 System Manual Table of Contents 64203376L1-1B © 2004 ADTRAN, Inc. 13 T able of Content s Section 1 System Description . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15 This section provides an overvie w of the Total Access 850 system.
Table of Contents Total Access 850 System Manua l 14 © 2004 ADTRAN, Inc. 64203376L1-1B.
64203376L1-1B © 2004 ADTRAN, Inc. 15 SYSTEM DESCRIPTION This section provides an over view of the T otal Access 850 system. C ONTENT S Features and Benefits . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Section 1 System Descriptio n T otal Access 850 System Manual 16 © 2004 ADTRAN, Inc. 64203376L1-1B.
Total Access 850 System Manual Se ction 1 System Description 64203376L1-1B © 2004 ADTRAN, Inc. 17 1. SYSTEM OVERVIEW The T otal Access 850 is an integra ted access device designed for cost-effective deployment of voice and data services at the customer premises.
Section 1 System Descriptio n T otal Access 850 System Manual 18 © 2004 ADTRAN, Inc. 64203376L1-1B Integrated Component s (with RCU) •I P r o u t e r • DSX-1 T1/PBX interface • V.35 Nx56/64 DTE interface T esting • Local and remote: payload/line, V.
Total Access 850 System Manual Se ction 1 System Description 64203376L1-1B © 2004 ADTRAN, Inc. 19 Access Modules (R equiring a BCU) • E&M/TO Access Module (P/N 1180402L1) • OCU DP Access Module (P/N 11800 05L1) • Single DS0 DP Access Module (P/N 1180003L1) • Nx56/64 (V.
Section 1 System Descriptio n T otal Access 850 System Manual 20 © 2004 ADTRAN, Inc. 64203376L1-1B built-in Echo Cancellation for up to 24 voice po rts. Adaptive Differentia l Pulse Code Modulation (ADPCM) resources are also built-in for up to 16 ports.
Total Access 850 System Manual Se ction 1 System Description 64203376L1-1B © 2004 ADTRAN, Inc. 21 OCU DP Access Modul e (P/N 1 180005L1) This module is only ava ilable in T otal Access 850 systems using a BCU.
Section 1 System Descriptio n T otal Access 850 System Manual 22 © 2004 ADTRAN, Inc. 64203376L1-1B.
64203376L1-1B © 2004 ADTRAN, Inc. 23 ENGINEERING GUIDELINES This section provides equi pment dimensions, power requireme nts, front p anel design, rear pan el design, LEDs, and at-a-glance specifications. C ONTENT S Power Requirements . . . . . . . .
Section 2 Engineering Guideli nes Total Access 850 System Manual 24 © 2004 ADTRAN, Inc. 64203376L1-1B Table 4. T1 RCU Faceplate LEDs . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 29 Table 5. 3rd GE N T1 RCU CRAFT (DB-9, Female) Pinout .
Total Access 850 System Ma nu al Section 2 Engineering Guide line s 64203376L1-1B © 2004 ADTRAN, Inc. 25 1. EQUIPMENT DIMENSIONS The T otal Access 850 cha ssis is 8.5” W , 1 1” D, and 3.5” H and can be mounted in a 19-inch or 23-inch rack (mounting brackets included in shipment).
Section 2 Engineering Guideli nes Total Access 850 System Manual 26 © 2004 ADTRAN, Inc. 64203376L1-1B Bank Controller Unit (1200373L1 and 1200373L2) The following is operatio nal information pertaining to the Bank Controller Unit when used with the T otal Access 850 system.
Total Access 850 System Ma nu al Section 2 Engineering Guide line s 64203376L1-1B © 2004 ADTRAN, Inc. 27 S1-2 Line Code Enables Bipolar Eight-Zero Substitution (B8Z S), which allows for Clear Channel operation for the T1 carri er system, or enables Alternate Mark Inversion (AMI).
Section 2 Engineering Guideli nes Total Access 850 System Manual 28 © 2004 ADTRAN, Inc. 64203376L1-1B Faceplate Bantam Jack The faceplate bantam jack provides a means to moni tor the network T1 connected to the rear of the T otal Access 850 chassis. The jacks accept standard 310- type bantam plugs.
Total Access 850 System Ma nu al Section 2 Engineering Guide line s 64203376L1-1B © 2004 ADTRAN, Inc. 29 Faceplate CRAFT Interface Use the CRAFT port located on the RCU faceplate to config ure the system via an EIA-232 connection. T able 3 displays the CRAFT port pin out.
Section 2 Engineering Guideli nes Total Access 850 System Manual 30 © 2004 ADTRAN, Inc. 64203376L1-1B Figure 4. RCU Bantam Jack Test Diagram 3rd GEN T1 Router Cont roller Unit (1203376L1) The following is operational informat ion pertaining to the 3rd Generat ion T1 Router Controller Un it when used with the T otal Acce ss 850 system.
Total Access 850 System Ma nu al Section 2 Engineering Guide line s 64203376L1-1B © 2004 ADTRAN, Inc. 31 Faceplate Bantam Jack The faceplate bantam jack provides a means to moni tor the network T1 connected to the rear of the T otal Access 850 chas sis.
Section 2 Engineering Guideli nes Total Access 850 System Manual 32 © 2004 ADTRAN, Inc. 64203376L1-1B SDSL Router Controller Unit (1200377L1 and 1200377L2) The following is oper ational information pertaining to the SDSL Router Controller Unit when used with the T otal Access 850 sys tem.
Total Access 850 System Ma nu al Section 2 Engineering Guide line s 64203376L1-1B © 2004 ADTRAN, Inc. 33 DIP-Switch Settings The T otal Access 850 SD SL RCU uses DIP-switches to determine power-up start mode. T able 9 provides details for the DIP-switches.
Section 2 Engineering Guideli nes Total Access 850 System Manual 34 © 2004 ADTRAN, Inc. 64203376L1-1B 10/100BaseT Connection (JP1) The 10/100BaseT port (RJ-48C) provides a 10/100BaseT Ethernet LAN conn ection for IP Routing , TF TP , SNMP , and T elnet connections.
Total Access 850 System Ma nu al Section 2 Engineering Guide line s 64203376L1-1B © 2004 ADTRAN, Inc. 35 T1 Connection (JP2) The T otal Access 850 system provides a single T1 port (loc ated on the rear panel) and complies with the applicable ANSI and A T&T™ standards.
Section 2 Engineering Guideli nes Total Access 850 System Manual 36 © 2004 ADTRAN, Inc. 64203376L1-1B The DSX-1 interface p i nout is shown in T able 13.
Total Access 850 System Ma nu al Section 2 Engineering Guide line s 64203376L1-1B © 2004 ADTRAN, Inc. 37 Nx56k/64k Port (J1) The T otal Access 850 system provides a single V .35 Winc hester -style connection on the rear of the chassis (as defined in T a ble 15).
Section 2 Engineering Guideli nes Total Access 850 System Manual 38 © 2004 ADTRAN, Inc. 64203376L1-1B Table 17. Alarm Notifi ca ti o n Clock Wire-W rap Strip (P1) A single wire-wrap strip is provided on the T otal Ac cess 850 backplane for connec tion to an external bits clock.
Total Access 850 System Ma nu al Section 2 Engineering Guide line s 64203376L1-1B © 2004 ADTRAN, Inc. 39 T1 Wire-W rap Connection (P3) There are two termination points for conn ecting the network T1 to the chassis: the primary RJ-48 connector (JP2) and the alternate wire-wrap pins on te rminal strip P3 (see Figure 6 on page 33).
Section 2 Engineering Guideli nes Total Access 850 System Manual 40 © 2004 ADTRAN, Inc. 64203376L1-1B Figure 8. Altern ate Power Connection 5. ACCESS MODULE INTERFACES Power Supply Unit (P/N 1 175006L2) The PSU receiv es externally s upplied -48 VDC fro m connec tors P4 (normal) and P5 (alternate) on the rear of the unit.
Total Access 850 System Ma nu al Section 2 Engineering Guide line s 64203376L1-1B © 2004 ADTRAN, Inc. 41 Quad FXS Access M odule (P/N 1 175408L2) The Quad FXS Access Modules use the 50-pin female amphe nol connector on the rear of the T otal Access 850 chassis to provide the interconnect wiring for the four analog circuits on each access module.
Section 2 Engineering Guideli nes Total Access 850 System Manual 42 © 2004 ADTRAN, Inc. 64203376L1-1B Interface Pinout Figure 9 shows the pinout connection for the amphenol connector .
Total Access 850 System Ma nu al Section 2 Engineering Guide line s 64203376L1-1B © 2004 ADTRAN, Inc. 43 Compliance Codes T able 22 provides the compliance codes fo r the T otal Access 850 Quad FXS Module.
Section 2 Engineering Guideli nes Total Access 850 System Manual 44 © 2004 ADTRAN, Inc. 64203376L1-1B Interface Pinout Figure 10 shows the pinout connection for the amphenol connector .
Total Access 850 System Ma nu al Section 2 Engineering Guide line s 64203376L1-1B © 2004 ADTRAN, Inc. 45 Compliance Codes T able 25 provides the compliance codes fo r the T otal Access 850 Quad FXO Module.
Section 2 Engineering Guideli nes Total Access 850 System Manual 46 © 2004 ADTRAN, Inc. 64203376L1-1B Interface Pinout T able 27 provides the interface pinout for th e U BR1 TE interfa ce slot/amphe nol connector assignment.
Total Access 850 System Ma nu al Section 2 Engineering Guide line s 64203376L1-1B © 2004 ADTRAN, Inc. 47 S1-2 T andem Offic e Installation Indicates whether the unit is inst alled in a T andem Office inst allation. ON LUL T Mode – indica tes an Adjacent-to-Customer configuration and sealing current should be provided (S 1-1 ON).
Section 2 Engineering Guideli nes Total Access 850 System Manual 48 © 2004 ADTRAN, Inc. 64203376L1-1B Specifications T able 29 provides the detaile d specifications for the T otal Access 850 UBR1 TE Module. Compliance Codes T able 30 provides the compliance codes for the T otal Access 850 UBR1 TE Module.
Total Access 850 System Ma nu al Section 2 Engineering Guide line s 64203376L1-1B © 2004 ADTRAN, Inc. 49 OCU DP Access Modul e (P/N 1 180005L1) The OCU DP module is a single port acc ess module u sed to provide the interface between a DS0 time slot on the T1 and a 4-wire DDS device at the customer pr emises.
Section 2 Engineering Guideli nes Total Access 850 System Manual 50 © 2004 ADTRAN, Inc. 64203376L1-1B Dual V .35 Access M odule (P/N 1 180025L1) The Dual V .
Total Access 850 System Ma nu al Section 2 Engineering Guide line s 64203376L1-1B © 2004 ADTRAN, Inc. 51 Specifications T able 35 provides the detaile d specifications for the T otal Access 850 Dual V .
Section 2 Engineering Guideli nes Total Access 850 System Manual 52 © 2004 ADTRAN, Inc. 64203376L1-1B Compliance Codes T able 36 provides the compliance codes for the T otal Access 850 Dual V .
Total Access 850 System Ma nu al Section 2 Engineering Guide line s 64203376L1-1B © 2004 ADTRAN, Inc. 53 Interface Pinout T able 38 provides the interface pinout for the provided RJ-45 DSX-1 interface. Specifications T able 39 provides the detaile d specificatio ns for the T otal Access 850 DSX-1 Module.
Section 2 Engineering Guideli nes Total Access 850 System Manual 54 © 2004 ADTRAN, Inc. 64203376L1-1B.
64203376L1-1B © 2004 ADTRAN, Inc. 55 NETWORK T URNUP PROCEDURE This section provides shipment cont ents list, grounding instructions, mo unting optio ns, and specifics of supplying power to the un it. C ONTENT S Tools Required . . . . . . . . . . . .
Section 3 Network Turnup Procedure Total Access 850 System Manual 56 © 2004 ADTRAN, Inc. 64203376L1-1B 1. INTRODUCTION This section discusses T otal Access 850 installation.
Total Access 850 Syste m Manual Section 3 Network T urnup Procedure 64203376L1-1B © 2004 ADTRAN, Inc. 57 Content s of ADTRAN Shipment s Y our ADTRAN shipment of the T otal Access 850 cha ssis include.
Section 3 Network Turnup Procedure Total Access 850 System Manual 58 © 2004 ADTRAN, Inc. 64203376L1-1B and the equipment grounding conducto rs serving these receptacles are to be connected to ea rth ground at the service equipment.
Total Access 850 Syste m Manual Section 3 Network T urnup Procedure 64203376L1-1B © 2004 ADTRAN, Inc. 59 DC Powered Systems The DC powered T otal Acces s 850 comes equipped w ith a DC Power supply to furnish the voltages necessary for proper backplane operation.
Section 3 Network Turnup Procedure Total Access 850 System Manual 60 © 2004 ADTRAN, Inc. 64203376L1-1B 7. MOUNTING OPTIONS The T otal Access 850 cha ssis may be wallmounte d or installed in a 19-inch or 23-inch rack. W a llmount brackets are included with the cha ssis.
Total Access 850 Syste m Manual Section 3 Network T urnup Procedure 64203376L1-1B © 2004 ADTRAN, Inc. 61 8. INST ALLING MODULES Figure 1 shows the slot numbering designation as viewed from the front of the T otal Access 850 chassis.
Section 3 Network Turnup Procedure Total Access 850 System Manual 62 © 2004 ADTRAN, Inc. 64203376L1-1B 3. Align the card edges to the gu ide grooves and insert the unit until the edge connector seats firmly into the backplane. 4. Lock the ca rd in place by pushi ng in on the lock lever .
Total Access 850 Syste m Manual Section 3 Network T urnup Procedure 64203376L1-1B © 2004 ADTRAN, Inc. 63 OCU DP Access Modul e (P/N 1 180005L1) Shipping Contents The ADTRAN shipment of the OCU DP Acc.
Section 3 Network Turnup Procedure Total Access 850 System Manual 64 © 2004 ADTRAN, Inc. 64203376L1-1B.
64203376L1-1B © 2004 ADTRAN, Inc. 65 USER INTERFACE GUIDE This section provides det ailed descri ptions of all menu options and configuration parameters available for the T otal Access 850 when used with a Router Control Unit ( RCU). This section does not apply to systems that employ a Bank Control Unit (BCU).
Section 4 User Interface Guide Total Access 850 System Manual 66 © 2004 ADTRAN, Inc. 64203376L1-1B F IGURES Figure 1. Top-Level Terminal Menu Window . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 69 Figure 2. Alternate Menu View .
Total Access 850 System M anual Se ction 4 User Interface Gu ide 64203376L1-1B © 2004 ADTRAN, Inc. 67 1. NAVIGATING THE T ERMINAL MENU T o access the termina l menus and management featur es of the T.
Section 4 User Interface Guide Total Access 850 System Manual 68 © 2004 ADTRAN, Inc. 64203376L1-1B horizontally across the window . T o change the view , move your cursor to an index number and press <E NTER > . Figure 2 shows this alternate view .
Total Access 850 System M anual Se ction 4 User Interface Gu ide 64203376L1-1B © 2004 ADTRAN, Inc. 69 Right Window Pane Not ation The right window pane shows the contents of the cu rrently selected menu. These contents include both submenu items and data fields.
Section 4 User Interface Guide Total Access 850 System Manual 70 © 2004 ADTRAN, Inc. 64203376L1-1B Session Manage ment Keystrokes Configuration Keystrokes Select items Arrows Edit a selected menu ite.
Total Access 850 System M anual Se ction 4 User Interface Gu ide 64203376L1-1B © 2004 ADTRAN, Inc. 71 Getting Help The bottom line of the term inal menu window contains context- sensitive help information. When the cursor is positioned over a set of configuration items, a help message displays (when available) providing a description of the item.
Section 4 User Interface Guide Total Access 850 System Manual 72 © 2004 ADTRAN, Inc. 64203376L1-1B Security Levels T o edit main menu system items, you must have a p assword and the appropriate security level. T able 1 describes the security levels. 3.
Total Access 850 System M anual Se ction 4 User Interface Gu ide 64203376L1-1B © 2004 ADTRAN, Inc. 73 S YSTEM I NFO The S YSTEM I NFO menu provides basic information about th e unit as well as data fields for editing information. Figure 3 displays th e su bmenus th at are available when you select this menu item.
Section 4 User Interface Guide Total Access 850 System Manual 74 © 2004 ADTRAN, Inc. 64203376L1-1B S YSTEM I NF O > U NIT N AME (Read only) Displays a prod uct-specific name fo r the unit (such as T A 850 RCU). S YSTEM I NF O > CLEI C ODE (Read only) Displays the regist ered CLEI code for the unit.
Total Access 850 System M anual Se ction 4 User Interface Gu ide 64203376L1-1B © 2004 ADTRAN, Inc. 75 S YSTEM C ONFIG Set up the unit’ s operational configuration from the S YSTEM C ONFIG menu. Figure 4 shows the ite ms included in this menu. Figure 4.
Section 4 User Interface Guide Total Access 850 System Manual 76 © 2004 ADTRAN, Inc. 64203376L1-1B S YSTEM C ONFIG > M ANAGEMENT > CRAFT P ORT > I DLE T IME This option defines the amount of time in minutes user may stay connected without any activity on the CRAFT port before the user is automatically logged out of the system.
Total Access 850 System M anual Se ction 4 User Interface Gu ide 64203376L1-1B © 2004 ADTRAN, Inc. 77 S YSTEM C ONFIG > M ANAGEMENT > T ELNE T A CCES S > A UTHEN M ETHOD Set up the T elnet authentication me thod from this menu. The choices are L OCAL P ASSWORD , R ADIUS , L OCAL /R ADIUS , and R ADIUS /L OCAL .
Section 4 User Interface Guide Total Access 850 System Manual 78 © 2004 ADTRAN, Inc. 64203376L1-1B S YSTEM C ONFIG > M ANAGEMENT > T ELNE T A CCES S > A CTIVE S ESSIONS Provides a list of all T elne t sessions curre ntly active on the T otal Access 850 system.
Total Access 850 System M anual Se ction 4 User Interface Gu ide 64203376L1-1B © 2004 ADTRAN, Inc. 79 S YSTEM C ONFIG > M ANAGEMENT > T ELNE T A CCES S > IP A CCESS L IST Set up the list of allowed T elnet managers.
Section 4 User Interface Guide Total Access 850 System Manual 80 © 2004 ADTRAN, Inc. 64203376L1-1B S YSTEM C ONFIG > M ANAGEMENT > SNMP M ANAG EMENT > T RAP S Sets up the trap manager name and IP from this menu.
Total Access 850 System M anual Se ction 4 User Interface Gu ide 64203376L1-1B © 2004 ADTRAN, Inc. 81 S YSTEM C ONFIG > M ANAGEMENT > FDL M ANAG EMENT > L INK IP A DDRESS This is the local IP address used for FDL management.
Section 4 User Interface Guide Total Access 850 System Manual 82 © 2004 ADTRAN, Inc. 64203376L1-1B S YSTEM C ONFIG > S YSLOG > S YSLOG F ORMAT The S YSLOG F ORMAT is the format of log messages. " A DT R A N " uses a format that is compatible with ADTRAN Utilities and forces the Syslog Facility to LOCAL0.
Total Access 850 System M anual Se ction 4 User Interface Gu ide 64203376L1-1B © 2004 ADTRAN, Inc. 83 SYSLOG using T erminal Mode Another option for configuring sy slog is using the terminal mode com mand log dump <logname> .
Section 4 User Interface Guide Total Access 850 System Manual 84 © 2004 ADTRAN, Inc. 64203376L1-1B S YSTEM C ONFIG > S YSLOG > ARP L EVEL Minimum required level for sending ARP l og messages. S YSTEM C ONFIG > S YSLOG > UDP L EVEL Minimum required level for sending UDP lo g messages.
Total Access 850 System M anual Se ction 4 User Interface Gu ide 64203376L1-1B © 2004 ADTRAN, Inc. 85 S YSTEM C ONFIG > S YSLOG > CMCP L EVEL Minimum required level for sending lo g messages about communication with the CopperMountain DSLAM. Messages are only generated for A TM products.
Section 4 User Interface Guide Total Access 850 System Manual 86 © 2004 ADTRAN, Inc. 64203376L1-1B S YSTEM C ONFIG > S YSLOG > A TM L EVEL Minimum required level for sending A TM log messages.
Total Access 850 System M anual Se ction 4 User Interface Gu ide 64203376L1-1B © 2004 ADTRAN, Inc. 87 S YSTEM C ONFIG > N ETWORK T IME Activate the network time and configure the server type, time zone and various other network time parameters from this menu.
Section 4 User Interface Guide Total Access 850 System Manual 88 © 2004 ADTRAN, Inc. 64203376L1-1B S YSTEM C ONFIG > N ETWORK T IME > S TA T U S This displays the current status of the time negotia tion process. If an error is displayed, check all connections and configurations to try to resolve the problem.
Total Access 850 System M anual Se ction 4 User Interface Gu ide 64203376L1-1B © 2004 ADTRAN, Inc. 89 S YSTEM U TILITY > U PGRADE F IRMWARE > T RANSFER S TAT U S This appears when TFTP is used. It displays the stat us of the transfer as it ha ppens.
Section 4 User Interface Guide Total Access 850 System Manual 90 © 2004 ADTRAN, Inc. 64203376L1-1B S YSTEM U TILITY > C ONFIG T RANS FER > C URRENT T RANSF ER S TAT U S Indicates the current status of the update. S YSTEM U TILITY > C ONFIG T RANS FER > P REVIOUS T RA NSFER S TA T U S Indicates the status of the previous update.
Total Access 850 System M anual Se ction 4 User Interface Gu ide 64203376L1-1B © 2004 ADTRAN, Inc. 91 S YSTEM U TILITY > P ING Activate the ping test and define the ping packet chara cteristics from this menu. S YSTEM U TILITY > P ING > S TA RT /S TOP Activator to start and cancel a ping test.
Section 4 User Interface Guide Total Access 850 System Manual 92 © 2004 ADTRAN, Inc. 64203376L1-1B S YSTEM U TILITY > T RACEROUT E > M AXIMUM H OP S Specifies the maximum number of router exchanges allowed when traveling to the final destination (specified using the T RACE T ARGET field) Range is 1 to 30 .
Total Access 850 System M anual Se ction 4 User Interface Gu ide 64203376L1-1B © 2004 ADTRAN, Inc. 93 timeout (seconds) T imeout in seconds (range 1-10) source (address or name) Source a ddress or interface name to use noNat Do not NA T the ping packet Options may be entered in any order and may be truncated.
Section 4 User Interface Guide Total Access 850 System Manual 94 © 2004 ADTRAN, Inc. 64203376L1-1B I NTERFACES Use the I NTERFACES menu to view and confi gure parameters for the T1 , E THERNET , V. 3 5 , FXS , FXO , DSX-1 M ODULE , and UBR1 TE interfaces as shown in Figure 6.
Total Access 850 System M anual Se ction 4 User Interface Gu ide 64203376L1-1B © 2004 ADTRAN, Inc. 95 I NTERFACES (T1) > C ONFIG > E QUALIZATION Select the line build out for the T1 interface. These are attenuation settings. 0 dB is the strongest signal, and the other settings make the T1 transmit signal weaker .
Section 4 User Interface Guide Total Access 850 System Manual 96 © 2004 ADTRAN, Inc. 64203376L1-1B I NTERFACES (T1) > S TA T U S > P E RFORMANCE > C URRENT AND T OT ALS > FS FS (Frame Slip) - A frame slip is defined as one or more frame bit errors in a one-second interval.
Total Access 850 System M anual Se ction 4 User Interface Gu ide 64203376L1-1B © 2004 ADTRAN, Inc. 97 I NTERFACES (T1) > S TA T U S > A LARMS > A LA RM H ISTORY Displays the alarm history for the T1 interface. An ast erisk in a field indicates that an alarm has occurred on the T1 interface since the last clear history .
Section 4 User Interface Guide Total Access 850 System Manual 98 © 2004 ADTRAN, Inc. 64203376L1-1B I NTERFACES (DSX) V i ew the integrated DSX interfa ce status an d configure T1 parameters from this menu. I NTERFACES (DSX) > C ONFIG Configure the various DSX parameters an d enable/disable loopbacks from this menu.
Total Access 850 System M anual Se ction 4 User Interface Gu ide 64203376L1-1B © 2004 ADTRAN, Inc. 99 I NTERFACES (DSX) > S TA TU S > P ERFORM ANCE > C URRENT AND T OTALS > ES ES (Errored.
Section 4 User Interface Guide Total Access 850 System Manual 100 © 2004 ADTRAN, Inc. 64203376L1-1B I NTERFACES (DSX) > S TA TU S > A LARMS Displays current alarms and alarm hist ory for the integrated DSX interface. I NTERFACES (DSX) > S TA TU S > A LARMS > C URRENT A LARMS Displays the current alarms on the T1 inte rface.
Total Access 850 System M anual Se ction 4 User Interface Gu ide 64203376L1-1B © 2004 ADTRAN, Inc. 101 I NTERFACES (ETH) V iew the Ethernet inte rface status and config ure the Ethernet parameters from this menu. I NTERFACES (ETH) > C ONFIG Configure the various Ethernet parameters from this menu.
Section 4 User Interface Guide Total Access 850 System Manual 102 © 2004 ADTRAN, Inc. 64203376L1-1B I NTERFACES (V35) V iew the V .35 interface status and config ure the V .35 paramete rs from this menu. I NTERFACES (V35) > C ON FIG Configure the DTE leads from this menu.
Total Access 850 System M anual Se ction 4 User Interface Gu ide 64203376L1-1B © 2004 ADTRAN, Inc. 103 I NTERFACES (FXS) V iew the FXS interface status and config ure the FXS parameters from this menu. I NTERFACES (FXS) > C ONFIG Configure the FXS mode, line impedance and T andem parameters from this menu.
Section 4 User Interface Guide Total Access 850 System Manual 104 © 2004 ADTRAN, Inc. 64203376L1-1B I NTERFACES (FXS) > C ONFIG > T X ( d B) Sets the TX direction level points. Th is si gnal will change the volume of the voice. TX (dB) is the signal that is transmitted out the T1, with 0 dB being the st rongest.
Total Access 850 System M anual Se ction 4 User Interface Gu ide 64203376L1-1B © 2004 ADTRAN, Inc. 105 I NTERFACES (FXS) > C ONFIG > T ANDEM A NSWER S UPERVISION Causes the polarity of tip and ring to be reversed when the far-end answers. Can be enabled or disabled.
Section 4 User Interface Guide Total Access 850 System Manual 106 © 2004 ADTRAN, Inc. 64203376L1-1B I NTERFACES (FXS) > T EST Activate tests and monitor test status on a per port basis from this menu. I NTERFACES (FXS) > T EST > S LOT Displays the slot number for the installed FXS Module.
Total Access 850 System M anual Se ction 4 User Interface Gu ide 64203376L1-1B © 2004 ADTRAN, Inc. 107 I NTERFACES (FXO ) V i ew the FXO interfa ce status and confi gure the FXO parameters from this menu. I NTERFACES (FXO) > C ONFIG Configure the FXO mo de, line impe da nce, and T andem parameters from this menu.
Section 4 User Interface Guide Total Access 850 System Manual 108 © 2004 ADTRAN, Inc. 64203376L1-1B I NTERFACES (FXO) > C ONFIG > S VC M ODE Indicates whether the module is I N S ERVICE or O UT OF S VC . This does not indicate whether the port has been mapped.
Total Access 850 System M anual Se ction 4 User Interface Gu ide 64203376L1-1B © 2004 ADTRAN, Inc. 109 I NTERFACES (FXO) > T EST > T EST Choices are given below . Defa ult is N ONE . I NTERFACES (FXO) > T EST > T EST S TAT U S This option indicates whether a test is in progress.
Section 4 User Interface Guide Total Access 850 System Manual 110 © 2004 ADTRAN, Inc. 64203376L1-1B I NTERFACE (DSX-1) > C ONFIG > L INE C ODE This setting must match the line co de of the circuit to which the interfa ce is connecte d. Choices are B8ZS (bipolar with 8-zero substitution) and AMI (alternate mark inversion).
Total Access 850 System M anual Se ction 4 User Interface Gu ide 64203376L1-1B © 2004 ADTRAN, Inc. 111 I NTERFACES (UBR1 TE M ODULE ) V i ew the UBR1 TE Module interface status and co nfigure the UBR1 TE Module parameters from this menu. I NTERFACES (UBR1 TE) > C ONFIG Configures the UBR1 TE interface format and code from this menu.
Section 4 User Interface Guide Total Access 850 System Manual 112 © 2004 ADTRAN, Inc. 64203376L1-1B Sink positions. Default is L ULT . Figure 7. UBR1T E Network Configuratio ns I NTERFACE (UBR1 TE) > C ON FIG > S ERVICE Allows the user to select the IS DN channels transmitted over the T1 facility .
Total Access 850 System M anual Se ction 4 User Interface Gu ide 64203376L1-1B © 2004 ADTRAN, Inc. 113 I NTERFACE (UBR1 TE) > C ON FIG > S EALING C URRENT DC sealing current is only ap plicable if the mode is LUL T . Sealing current should be pre sent for Adjacent-to-Customer applications.
Section 4 User Interface Guide Total Access 850 System Manual 114 © 2004 ADTRAN, Inc. 64203376L1-1B L EASED M ODE T ESTING ( INITIATED BY THE NETWORK ; NOT A MENU OPTION ) For leased mode applications, the D channel is typically disabled on the UBR1 TE.
Total Access 850 System M anual Se ction 4 User Interface Gu ide 64203376L1-1B © 2004 ADTRAN, Inc. 115 Upon receipt of an OCU latching loopback, the UBR1 TE provides a bilateral loopback on the bearer channel that received the loopback s equence. The other b earer channel is not affect ed during this loopback.
Section 4 User Interface Guide Total Access 850 System Manual 116 © 2004 ADTRAN, Inc. 64203376L1-1B L2 P ROTOCOL (T1 TDM F IRMWARE ) Use the L2 protocol menu to select the L2 pro t oco l, co nfigure the protocol specific parameters and view the status as shown in Figure 8.
Total Access 850 System M anual Se ction 4 User Interface Gu ide 64203376L1-1B © 2004 ADTRAN, Inc. 117 L2 P ROTOCOL (T1 TDM F IRMWARE ) – T1 I NTERFACE Configure the L2 Protocol parameters and view the st atus of the T1 interface us ing items from this menu.
Section 4 User Interface Guide Total Access 850 System Manual 118 © 2004 ADTRAN, Inc. 64203376L1-1B L2 P ROTOCOL (T1 TDM F IRMWARE ) – T1 I NTERFACE > PPP Configure the L2 P ROTOCOL parameters and view the status of the T1 interface using PPP pro tocol from this menu.
Total Access 850 System M anual Se ction 4 User Interface Gu ide 64203376L1-1B © 2004 ADTRAN, Inc. 119 L2 P ROTOCOL (T1 TDM–T1–PPP) > C ONFIG > PPP > M AX T IMER ( SEC ) This value is the numbers of secon ds to wait between unans wered co nfiguration-requests.
Section 4 User Interface Guide Total Access 850 System Manual 120 © 2004 ADTRAN, Inc. 64203376L1-1B L2 P ROTOCOL (T1 TDM–T1–PPP) > S TA T U S > R X P KT S Number of packets receiv ed on the T1 i nterface. L2 P ROTOCOL (T1 TDM–T1–PPP) > S TA T U S > T X B YTES Number of bytes transmitted on the T1 interface.
Total Access 850 System M anual Se ction 4 User Interface Gu ide 64203376L1-1B © 2004 ADTRAN, Inc. 121 L2 P ROTOCOL (T1 TDM F IRMWARE ) – T1 I NTERFACE > FRE P ROTOCOL Configure the L2 P ROTOCOL parameters and view the status of th e T1 interface using Frame Relay protocol from this menu.
Section 4 User Interface Guide Total Access 850 System Manual 122 © 2004 ADTRAN, Inc. 64203376L1-1B match occurs. If this default entry is not present, the unit falls back to using IARP to determine the protocols to use with that particular virtual circuit.
Total Access 850 System M anual Se ction 4 User Interface Gu ide 64203376L1-1B © 2004 ADTRAN, Inc. 123 L2 P ROTOCOL (T1 TDM–T1–FRE) > S TA T U S > P ORT V iew the Frame Relay statistics on the W AN port. L2 P ROTOCOL (T1 TDM–T1–FRE) > S TA T U S > P ORT > P ORT I NDEX Integer used for identifying DLCIs on an interface.
Section 4 User Interface Guide Total Access 850 System Manual 124 © 2004 ADTRAN, Inc. 64203376L1-1B L2 P ROTOCO L (T1 TDM–T1–FRE) > S TA T U S > P ORT > L INK I NTEGRITY S TA T U S T X F RAMES Number of Link-Integrity (LI) only frames transmitted out the W AN port.
Total Access 850 System M anual Se ction 4 User Interface Gu ide 64203376L1-1B © 2004 ADTRAN, Inc. 125 L2 P ROTOCOL (T1 TDM–T1–FRE) > S TA T U S > P VC( S ) > R X B YTES Number of Frame Relay bytes that have been received via this DLCI.
Section 4 User Interface Guide Total Access 850 System Manual 126 © 2004 ADTRAN, Inc. 64203376L1-1B L2 P ROTOCOL (T1 TDM–T1–HDLC) > S TA T U S > R X P KT S Number of packets receiv ed on the T1 i nterface. L2 P ROTOCOL (T1 TDM–T1–HDLC) > S TA T U S > T X B YTES Number of bytes transmitted on the T1 interface.
Total Access 850 System M anual Se ction 4 User Interface Gu ide 64203376L1-1B © 2004 ADTRAN, Inc. 127 L2 P ROTOCOL (T1 TDM–T1–A UTO ) > S TAT U S > S TA T E This field represents the state of the auto detect/configuration function.
Section 4 User Interface Guide Total Access 850 System Manual 128 © 2004 ADTRAN, Inc. 64203376L1-1B L2 P ROTOCOL (T1 A TM F IRMWARE ) Use the L2 P ROTOCOL menu to select the L2 P ROTOCO L , configure the protocol specific parameters, and view the status as shown in Figure 8.
Total Access 850 System M anual Se ction 4 User Interface Gu ide 64203376L1-1B © 2004 ADTRAN, Inc. 129 L2 P ROTOCOL (T1 A TM F IRMWARE ) – T1 I NTERFACE Configure the L2 P ROTOCOL parameters and view the status of th e T1 interface using items from this menu.
Section 4 User Interface Guide Total Access 850 System Manual 130 © 2004 ADTRAN, Inc. 64203376L1-1B L2 P ROTOCOL (T1 A TM–T1–A TM) > C ONFIG > A TM C ONFIG > D ATA S CRAMBLING D AT A S CRAMBLING can be E NABLED or D ISABLED for cell traffic.
Total Access 850 System M anual Se ction 4 User Interface Gu ide 64203376L1-1B © 2004 ADTRAN, Inc. 131 L2 P ROTOCOL (T1 A TM–T1–A TM) > C ONFIG > PVC C ONFIG > VCI This is the A TM V irtual Channel Identifier that serves as an address for the virtual channel cell transmissions between two devices.
Section 4 User Interface Guide Total Access 850 System Manual 132 © 2004 ADTRAN, Inc. 64203376L1-1B T X M ETHOD Specifies the method the T otal Access 850 uses to obtain PPP a uthentication from the peer . There are four possible selections: N ONE The connection will not allow the PPP peer to authenticate it.
Total Access 850 System M anual Se ction 4 User Interface Gu ide 64203376L1-1B © 2004 ADTRAN, Inc. 133 L2 P ROTOCOL (T1 A TM–T1–A TM) > C ONFIG > PVC C ONFIG > S ETUP (V35) Use these menus to configure the V3 5 parameters for this logical connection from the T1 interface to the V .
Section 4 User Interface Guide Total Access 850 System Manual 134 © 2004 ADTRAN, Inc. 64203376L1-1B L2 P ROTOCOL (T1 A TM–T1–A TM) > C ONFIG > PVC C ONFIG > S ETUP (V OICE ) Use these menus to configure the voic e parameters for this logical conn ection from the T1 interface to the DSX-1 of FXS port being used as a voice interf ace.
Total Access 850 System M anual Se ction 4 User Interface Gu ide 64203376L1-1B © 2004 ADTRAN, Inc. 135 L2 P ROTOCOL (T1 A TM–T1–A TM) > C ONFIG > PVC C ONFIG > QOS Use these menus to configure the Quality of Service parameters for the connectio n.
Section 4 User Interface Guide Total Access 850 System Manual 136 © 2004 ADTRAN, Inc. 64203376L1-1B L2 P ROTOCO L (T1 A TM–T1–A TM) > S TAT US > A T M S TAT US Displays overall A TM link performance statistic s.
Total Access 850 System M anual Se ction 4 User Interface Gu ide 64203376L1-1B © 2004 ADTRAN, Inc. 137 L2 P ROTOCOL (T1 A TM–T1–A TM) > S TA T U S > PVC S TA T U S > S UB -I NTERFACE The T1 S UB -I NTERFACE is A TM[0.0] , representing the T1 physical and logi cal ports, respectively .
Section 4 User Interface Guide Total Access 850 System Manual 138 © 2004 ADTRAN, Inc. 64203376L1-1B L2 P ROTOCOL (T1 A TM–T1–A TM) > S TA T U S > PVC S TA T U S > P ROTO COL S TAT US Use these menus to view the AAL2 S TATS , P OTS S TA TS , and to C LEA R S TATS for the PVC Protocol.
Total Access 850 System M anual Se ction 4 User Interface Gu ide 64203376L1-1B © 2004 ADTRAN, Inc. 139 L2 P ROTOCOL (T1 A TM F IRMWARE ) – T1 I NTERFACE > C U MTN Configure the L2 P ROTOCOL parameters and view the sta tus o f th e T1 interface using Copper Mountain Frame Relay protocol from this menu.
Section 4 User Interface Guide Total Access 850 System Manual 140 © 2004 ADTRAN, Inc. 64203376L1-1B L2 P ROTOCOL (T1 A TM–T1–C U MTN) > C ON FIG Configure the L2 P ROTOCOL parameters for the T1 interface using Copper Mountain Frame Relay protocol.
Total Access 850 System M anual Se ction 4 User Interface Gu ide 64203376L1-1B © 2004 ADTRAN, Inc. 141 L2 P ROTOCOL (T1 A TM–T1–C U MTN) > S TA T U S V i ew the status of the Copper Mountain DLCI connections. L2 P ROTOCOL (T1 A TM–T1–C U MTN) > S TA T U S > N UM Displays the index number for the Status menu entries.
Section 4 User Interface Guide Total Access 850 System Manual 142 © 2004 ADTRAN, Inc. 64203376L1-1B L2 P ROTOCOL (T1 A TM – V35) > C ONFIG > UNI M AINT P RO TOCOL Specifies the maintenance protocol or signa ling protoc ol between the local V .
Total Access 850 System M anual Se ction 4 User Interface Gu ide 64203376L1-1B © 2004 ADTRAN, Inc. 143 L2 P ROTOCOL (T1 A TM F IRMWARE ) – DSX I NTERFACE Configure the L2 P ROTOCOL parameters and view the status of the integrated DSX interface using items from this menu.
Section 4 User Interface Guide Total Access 850 System Manual 144 © 2004 ADTRAN, Inc. 64203376L1-1B L2 P ROTOCOL (A LL F IRMWARE ) – ETH I NTERFACE > 802.3 P ROTOCOL Configure the L2 PROTOCOL parameters and view the status of the Ethernet interface from this menu.
Total Access 850 System M anual Se ction 4 User Interface Gu ide 64203376L1-1B © 2004 ADTRAN, Inc. 145 L2 P ROTOCOL (ALL–ETH–802.3) > S TA T U S > R X E RR ORS Number of packets receiv ed in error and dropped. L2 P ROTOCOL (ALL–ETH–802.
Section 4 User Interface Guide Total Access 850 System Manual 146 © 2004 ADTRAN, Inc. 64203376L1-1B B RIDGE > C ONFIG > I NTERFACES (T1) Configure the T1 interface brid ging parameters from this menu. B RIDGE > C ONFIG > I NTERFACES (T1) > S UB -I NTERFAC E The T1 sub-interface is PPP [0.
Total Access 850 System M anual Se ction 4 User Interface Gu ide 64203376L1-1B © 2004 ADTRAN, Inc. 147 B RIDGE > S TAT U S > B RID GE T ABLE > TTL T ime to Live (TTL) is the number of seconds until the address is removed from the table. T his is a read only field.
Section 4 User Interface Guide Total Access 850 System Manual 148 © 2004 ADTRAN, Inc. 64203376L1-1B R OUTER Configure the router parameters and view routin g statistics from this menu as shown in Figure 8. Figure 11. Router Menu R OUTER > C ONFIG Configure the interfaces, routes, DHCP Serv er , and UDP Relay options from this menu.
Total Access 850 System M anual Se ction 4 User Interface Gu ide 64203376L1-1B © 2004 ADTRAN, Inc. 149 R OUTER > C ONFIG > I NTERFACES (ETH)> S ETUP Configure the Ethernet addressing, RIP , and Proxy ARP from this menu. P RIMARY IP This is used to setup the IP addresses for the LAN on the unit.
Section 4 User Interface Guide Total Access 850 System Manual 150 © 2004 ADTRAN, Inc. 64203376L1-1B R OUTER > C ONFIG > I NTERFACES (NET) Configure the layer 3 options for the network interface from this menu. V2 S ECRET Enter the secret used b y RIP version 2 here.
Total Access 850 System M anual Se ction 4 User Interface Gu ide 64203376L1-1B © 2004 ADTRAN, Inc. 151 R OUTER > C ONFIG > I NTERFACES (NET) > S UB -I NTERFACE This is a read-only field which displays the physical and logical por t of the interface using the following nomenclature: [A.
Section 4 User Interface Guide Total Access 850 System Manual 152 © 2004 ADTRAN, Inc. 64203376L1-1B F AR -E ND IP A DDRESS This is the address of the NEXT hop router on this interface. This field is only visible when A DDRESS M ODE is set to U SER S PECIFIED .
Total Access 850 System M anual Se ction 4 User Interface Gu ide 64203376L1-1B © 2004 ADTRAN, Inc. 153 P UBLIC A DDRESS M ODE Choose NAPT A DDR (default) or S PECIFIED to choose which address to use for this translation. Choosing S PECIFIED allows the user to define a dif ferent public IP address to use for this translation.
Section 4 User Interface Guide Total Access 850 System Manual 154 © 2004 ADTRAN, Inc. 64203376L1-1B P UBLIC P ORT M ODE This option appears when the P ROTOCOL M ODE is configured with a single protocol (such as TCP , UDP , or ICMP). Choices are A NY P ORT (default) and S PECIFIED .
Total Access 850 System M anual Se ction 4 User Interface Gu ide 64203376L1-1B © 2004 ADTRAN, Inc. 155 P RIVATE P ORT M ODE Select A NY P OR T (default) or a S PECIFIED port number for this translation. The private destination port associated with this entry c an be specified to provide more control over certain types of traf fic.
Section 4 User Interface Guide Total Access 850 System Manual 156 © 2004 ADTRAN, Inc. 64203376L1-1B S POOFED P ORT Spoofed port number for the translation. The T otal Acces s 850 often needs to use the spoofed ports to determine which private device to translate the pack et to.
Total Access 850 System M anual Se ction 4 User Interface Gu ide 64203376L1-1B © 2004 ADTRAN, Inc. 157 R OUTER > C ONFIG > R OUTES Configures the default gateway an d static routes from this menu.
Section 4 User Interface Guide Total Access 850 System Manual 158 © 2004 ADTRAN, Inc. 64203376L1-1B R OUTER > C ONFIG > DHCP S ERVER Use this menu to set up the DHCP server . R OUTER > C ONFIG > DHCP S ERVER > DHCP S ERVER Use this menu to enable the DHCP server ( O N or O FF ).
Total Access 850 System M anual Se ction 4 User Interface Gu ide 64203376L1-1B © 2004 ADTRAN, Inc. 159 N ETWORK A DDRESS Defines the network address for the configured address pool (for example, 172.24.0.0). The N ETWORK A DDRESS and N ETWORK M ASK determine the number of addresses available on the network for the configured pool.
Section 4 User Interface Guide Total Access 850 System Manual 160 © 2004 ADTRAN, Inc. 64203376L1-1B R OUTER > C ONFIG > DHCP S ERVER > E XC LUSION R ANGES Defines any IP address (or range of addresses ) that should not be u sed the T otal Access 850 DHCP server when making IP assignments to hosts on the network.
Total Access 850 System M anual Se ction 4 User Interface Gu ide 64203376L1-1B © 2004 ADTRAN, Inc. 161 R OUTER > C ONFIG > UDP R ELAY This menu configures the unit to act as a UDP rela y agent for applications requiring a response from UDP hosts that are not on the same network segment as their clients.
Section 4 User Interface Guide Total Access 850 System Manual 162 © 2004 ADTRAN, Inc. 64203376L1-1B R OUTER > S TA T U S > IP R OUTES > P ORT Port gateway is located on: R OUTER > S TA T U S > IP R OUTES > U SE Number of times the unit has referenced the route.
Total Access 850 System M anual Se ction 4 User Interface Gu ide 64203376L1-1B © 2004 ADTRAN, Inc. 163 •I P •I C M P •T C P • UDP All of these statistics are taken from the MIB-II variable s in RFC 1 156. T o clear the accumulated statistics, press the <E NTER > key on C LEAR C OUNTS .
Section 4 User Interface Guide Total Access 850 System Manual 164 © 2004 ADTRAN, Inc. 64203376L1-1B D AT AGRAMS D ISCARDED The number of input IP datagrams fo r which no problems were encoun tered to prevent their continued processing, but which were discarded (e.
Total Access 850 System M anual Se ction 4 User Interface Gu ide 64203376L1-1B © 2004 ADTRAN, Inc. 165 R OUTER > S TA T U S > IP S TATS > ICMP S UCCESSFUL F RAGMENTS The number of IP datagrams that h ave been successfully fragmented at this unit.
Section 4 User Interface Guide Total Access 850 System Manual 166 © 2004 ADTRAN, Inc. 64203376L1-1B ICMP R EDIRECTED M ESSAGES R CVD The number of ICMP Redirect messages received. ICMP E CHO R EQUEST M SGS R CVD The number of ICMP Echo (request) messages received.
Total Access 850 System M anual Se ction 4 User Interface Gu ide 64203376L1-1B © 2004 ADTRAN, Inc. 167 R OUTER > S TA T U S > IP S TATS > UDP V iew the UDP statistics from this menu. ICMP P ARAMETER P ROBLEM M SGS S ENT The number of ICMP Parameter Problem messages sent.
Section 4 User Interface Guide Total Access 850 System Manual 168 © 2004 ADTRAN, Inc. 64203376L1-1B R OUTER > S TA T U S > IP S TATS > UDP T ABLE V iew the UDP table statistics from this menu. R OUTER > S TA T U S > IP S TATS > TCP V iew the TCP statistics from this menu.
Total Access 850 System M anual Se ction 4 User Interface Gu ide 64203376L1-1B © 2004 ADTRAN, Inc. 169 M AX TCP C ONNECT IONS The limit on the total number of TCP connecti ons the unit can supp ort. In entities where the maximum number of connectio ns is dynamic, thi s object should contain the value -1.
Section 4 User Interface Guide Total Access 850 System Manual 170 © 2004 ADTRAN, Inc. 64203376L1-1B R OUTER > S TA T U S > IP S TATS > TCP C ONNS V i ew the TCP Conns Statistics from this menu. This table shows the different states of each TCP connection.
Total Access 850 System M anual Se ction 4 User Interface Gu ide 64203376L1-1B © 2004 ADTRAN, Inc. 171 Figure 12. Security Me nu.
Section 4 User Interface Guide Total Access 850 System Manual 172 © 2004 ADTRAN, Inc. 64203376L1-1B S ECURITY > F IL TERS Configure the filter characteristics from this menu. S ECURITY > F IL TERS > F ILTER D EFINES The unit can filter packets based on certain parameters within the pack et.
Total Access 850 System M anual Se ction 4 User Interface Gu ide 64203376L1-1B © 2004 ADTRAN, Inc. 173 S ECURITY > F IL TERS > F ILTER D EFINES > P ATTERN F ILTER D EFINES The pattern filter is applied to bridge packets only . Th at is any packet which is forward ed by the bridge functionality of the unit.
Section 4 User Interface Guide Total Access 850 System Manual 174 © 2004 ADTRAN, Inc. 64203376L1-1B N UM Indicates the entry number in the IP Filter Defines table. N AME Identifies the filter entry . Default is no entry in name field. F ILTER T YPE Specifies a N ORMAL or D EBUG filter .
Total Access 850 System M anual Se ction 4 User Interface Gu ide 64203376L1-1B © 2004 ADTRAN, Inc. 175 S ECURITY > F IL TERS > I NTERFACES The unit can bl ock packets in and out o f an interface by us e of the filters.
Section 4 User Interface Guide Total Access 850 System Manual 176 © 2004 ADTRAN, Inc. 64203376L1-1B S ECURITY > F IL TERS > I NTERFACES (ETH) > S UB -I NT ERFACE The Ethernet sub-in terface is 802.
Total Access 850 System M anual Se ction 4 User Interface Gu ide 64203376L1-1B © 2004 ADTRAN, Inc. 177 N EXT O PER The next operation to use to combine with the next filter in the list (default is E ND ). END the last filter to combination. AND logically AND this filter with the next filter in the list.
Section 4 User Interface Guide Total Access 850 System Manual 178 © 2004 ADTRAN, Inc. 64203376L1-1B S ECURITY > R AD IUS S ERVER The parameters for the R ADIUS S ERVER are configured in this menu.
Total Access 850 System M anual Se ction 4 User Interface Gu ide 64203376L1-1B © 2004 ADTRAN, Inc. 179 S ECURITY > R AD IUS S ERVER > R ETRY C OUNT (1-10) This is the number of times the unit should send a request packet tho the R ADIUS S ERV ER without a response before giving up.
Section 4 User Interface Guide Total Access 850 System Manual 180 © 2004 ADTRAN, Inc. 64203376L1-1B DS0 M APS > A CTIV E M AP Activates one of the two dedicated maps ( M AP 1 or M AP 2 ), or the D UAL T1 M AP . In the D UAL T1 mode, the built-in DSX-1 interface DSX[3] can be u tilized as a secondary T1 connection.
Total Access 850 System M anual Se ction 4 User Interface Gu ide 64203376L1-1B © 2004 ADTRAN, Inc. 181 DS0 M APS > E DIT /V IEW M AP 1 > RBS Robbed Bit Signaling. Default is N/A . Once a SLOT and port are assigned, this will automatically change to O N or O FF .
Section 4 User Interface Guide Total Access 850 System Manual 182 © 2004 ADTRAN, Inc. 64203376L1-1B 4. APPENDICES (T1 TDM APPLICATIONS) Appendix A. Configuri ng the Unit for Routing Initial Setup It is best to configure T otal Access 850 TDM applic ations by following the order of the top-level menus.
Total Access 850 System M anual Se ction 4 User Interface Gu ide 64203376L1-1B © 2004 ADTRAN, Inc. 183 2. Configuring the Layer 2 Protocol For more details on the co nfiguration parameters disc ussed.
Section 4 User Interface Guide Total Access 850 System Manual 184 © 2004 ADTRAN, Inc. 64203376L1-1B 7 Set DLCI to the DLCI number . This DLCI s hould match what is programmed in the network Frame Relay switch.
Total Access 850 System M anual Se ction 4 User Interface Gu ide 64203376L1-1B © 2004 ADTRAN, Inc. 185 3. Setting the Router Options For more details on the co nfiguration parameters disc ussed in th.
Section 4 User Interface Guide Total Access 850 System Manual 186 © 2004 ADTRAN, Inc. 64203376L1-1B 4. Mapping the DS0s For more details on the co nfiguration parameters disc ussed in this section, r.
Total Access 850 System M anual Se ction 4 User Interface Gu ide 64203376L1-1B © 2004 ADTRAN, Inc. 187 DS0 Mapping Instructio ns Ste p Ac t io n 1 From the main menu, select DS0 M AP S . 2 V erify that the A CTIVE M AP is set to either M AP 1 or M AP 2 .
Section 4 User Interface Guide Total Access 850 System Manual 188 © 2004 ADTRAN, Inc. 64203376L1-1B Appendix B. Configuring the Unit for Bridging Initial Setup It is best to configure T otal Access 850 TDM applic ations by following the order of the top-level menus.
Total Access 850 System M anual Se ction 4 User Interface Gu ide 64203376L1-1B © 2004 ADTRAN, Inc. 189 2. Configuring the Layer 2 Protocol For more details on the co nfiguration parameters disc ussed.
Section 4 User Interface Guide Total Access 850 System Manual 190 © 2004 ADTRAN, Inc. 64203376L1-1B 7 Set DLCI to the DLCI number . This DLCI s hould match what is programmed in the network Frame Relay switch.
Total Access 850 System M anual Se ction 4 User Interface Gu ide 64203376L1-1B © 2004 ADTRAN, Inc. 191 3. V erifying the Bridge Options For more details on the co nfiguration parameters disc ussed in this section, re fer to the following pages: Bridge menus beginnin g on page 145 4.
Section 4 User Interface Guide Total Access 850 System Manual 192 © 2004 ADTRAN, Inc. 64203376L1-1B 5 Set the P ORT of the DS0 that yo u are ma pping to R OUTER 64K or R OUTE R 56K . 6 Map all the DS0s as desired, and exit this menu by pressing the left arr ow button.
Total Access 850 System M anual Se ction 4 User Interface Gu ide 64203376L1-1B © 2004 ADTRAN, Inc. 193 Appendix C. Configur ing the Unit for V oice App lications Initial Setup It is best to configure T otal Access 850 TDM applic ations by following the order of the top-level menus.
Section 4 User Interface Guide Total Access 850 System Manual 194 © 2004 ADTRAN, Inc. 64203376L1-1B FXS Interface Set u p Inst ruc ti o ns Ste p Ac t io n 1 From the main menu, select I NTERFACES . 2 Highlight the C ONFIG menu for the FXS inte rface and press <E NTER > .
Total Access 850 System M anual Se ction 4 User Interface Gu ide 64203376L1-1B © 2004 ADTRAN, Inc. 195 2. Mapping the DS0s For more details on the co nfiguration parameters disc ussed in this section.
Section 4 User Interface Guide Total Access 850 System Manual 196 © 2004 ADTRAN, Inc. 64203376L1-1B Appendix D. Configuring the Unit for DSX-1 Applications The T otal Access 600 Se ries systems are available with an integrated DSX-1 interface for both voice and data applications.
Total Access 850 System M anual Se ction 4 User Interface Gu ide 64203376L1-1B © 2004 ADTRAN, Inc. 197 2. Mapping the DS0s For more details on the co nfiguration parameters disc ussed in this section, re fer to the following pages: DS0 Map menus beginn ing on page 180 This line code must match the line code used by the other units in the network.
Section 4 User Interface Guide Total Access 850 System Manual 198 © 2004 ADTRAN, Inc. 64203376L1-1B DS0 Mapping Instructio ns Ste p Ac t io n 1 From the main menu, select DS0 M AP S . 2 V erify tha t the A CTIVE M AP is set to either M AP 1 or M AP 2 .
Total Access 850 System M anual Se ction 4 User Interface Gu ide 64203376L1-1B © 2004 ADTRAN, Inc. 199 5. APPENDICES (T1 A TM APPLICAT IONS) Appendix A. V oice Gateway Quick St art Procedure (V oice T urn Up) A typical V oA TM application (see Figure 7) uses a T otal Access 850 connected to an A TM network.
Section 4 User Interface Guide Total Access 850 System Manual 200 © 2004 ADTRAN, Inc. 64203376L1-1B The following example provides step by step instru ctions for configuring the T otal Access 850 T1 A TM system ( I NTERFACES and L2 P ROTOCOL ) for a standard voice application.
Total Access 850 System M anual Se ction 4 User Interface Gu ide 64203376L1-1B © 2004 ADTRAN, Inc. 201 FXS Interface Set u p Inst ruc ti o ns Ste p Ac t i on 1 From the main menu, select I NTERFACES . 2 Highlight th e C ONFIG menu for the FXS interface and press <E NTER > .
Section 4 User Interface Guide Total Access 850 System Manual 202 © 2004 ADTRAN, Inc. 64203376L1-1B 2. Configuring the Layer 2 Protocol For more details on the co nfiguration parameters disc ussed in.
Total Access 850 System M anual Se ction 4 User Interface Gu ide 64203376L1-1B © 2004 ADTRAN, Inc. 203 8 Select S ETUP , and from the S ETUP menu, enter the Ga teway type under C ALL C ONTROL and enter the VPI and VCI value s for communicating with that Gateway .
Section 4 User Interface Guide Total Access 850 System Manual 204 © 2004 ADTRAN, Inc. 64203376L1-1B Appendix B. RFC1483 Qu ick St art (IP Routing) The T otal Access 850 allow s for complete inte gra tion of voice and data delivery from one compact platform (see Figure 10).
Total Access 850 System M anual Se ction 4 User Interface Gu ide 64203376L1-1B © 2004 ADTRAN, Inc. 205 T1 Interface Setup Instructions Ste p Ac t io n 1 From the main menu, select I NTERFACES . 2 Highlight the C ONFIG menu for the T1 inter face and press <E NTER > .
Section 4 User Interface Guide Total Access 850 System Manual 206 © 2004 ADTRAN, Inc. 64203376L1-1B . 2. Configuring th e Layer 2 Protocol For more details on the co nfiguration parameters disc ussed.
Total Access 850 System M anual Se ction 4 User Interface Gu ide 64203376L1-1B © 2004 ADTRAN, Inc. 207 3. Setting the Router Options For more details on the co nfiguration parameters disc ussed in th.
Section 4 User Interface Guide Total Access 850 System Manual 208 © 2004 ADTRAN, Inc. 64203376L1-1B 3 Select I NT ERFACES and press <E NTER > . Use the right arrow key to h ighlight the S ETUP field for the T1 interf ac e and press <E NTER > .
Total Access 850 System M anual Se ction 4 User Interface Gu ide 64203376L1-1B © 2004 ADTRAN, Inc. 209 Appendix C. RFC1483 Quick St art (IP Routing with NA T) T o illustrate the use of NA T , consider the example from Appendix B. R FC1483 Quick S tart (IP Routing) on page 204.
Section 4 User Interface Guide Total Access 850 System Manual 210 © 2004 ADTRAN, Inc. 64203376L1-1B Appendix D. RFC 1483 Qu ick S t art (Bridging) Initial Setup It is best to configure T otal Access 850 A T M applica tions by following the order of the top-level menus.
Total Access 850 System M anual Se ction 4 User Interface Gu ide 64203376L1-1B © 2004 ADTRAN, Inc. 211 . 2. Configuring th e Layer 2 Protocol For more details on the co nfiguration parameters disc us.
Section 4 User Interface Guide Total Access 850 System Manual 212 © 2004 ADTRAN, Inc. 64203376L1-1B 3. V erifying the Bridge Options For more details on the co nfiguration parameters disc ussed in this section, re fer to the following pages: Bridge menus beginnin g on page 145 9 Set mode to R OUTE IP .
64203376L1-1B © 2004 ADTRAN, Inc. 213 DET AIL LEVEL PROCEDURES DLP-1 Connecting a VT100 Terminal or PC to the CRAFT Port . . . . . . . . . . . . . . . . . . . . . . . . . . . 215 DLP-2 Logging in to the System . . . . . . . . . . . . . . . . . . . . .
Section 5 Detail Level Procedures Total Access 850 System Manual 214 © 2004 ADTRAN, Inc. 64203376L1-1B.
64203376L1-1B © 2004 ADTRAN, Inc. 215 DLP-1 Connecting a VT100 T erminal or PC to the CRAFT Port Introduction T otal Access 850 shelf management and provisioning are facilitated by a series of intuitive menus that are accessible on a computer screen.
Section 5 DLP-1 Total Access 850 System Manual 216 © 2004 ADTRAN, Inc. 64203376L1-1B 1. Connecting a VT10 0 te rm ina l to T otal Access 850 : 2. Connect a PC emulating a VT -100 terminal to T otal Access 850. Most personal computers (PCs) or laptops can ru n communications software that emulates a VT100 terminal.
64203376L1-1B © 2004 ADTRAN, Inc. 217 DLP-2 Logging in to the System Introduction Once connected to the T otal Acces s 85 0, you must login to the system to gain access to the management and provisioning functions. This DLP assumes you ar e connected to the T otal Access 850 and provides specific steps for logg ing into the system.
Section 5 DLP-2 Total Access 850 System Manual 218 © 2004 ADTRAN, Inc. 64203376L1-1B 1. After connecting to th e system, press any key to display the Login screen shown here. The blinking cursor at the Login field indicate s that a passwor d must be entered.
64203376L1-1B © 2004 ADTRAN, Inc. 219 DLP-3 Setting IP Parameters for the T ot al Access 850 Introduction If the T otal Access 850 is connected to an IP networ k for T elnet, TFTP , or SNMP mana gement, there are several IP parameters which must be set for the unit to communicate with the ne twork.
Section 5 DLP-3 Total Access 850 System Manual 220 © 2004 ADTRAN, Inc. 64203376L1-1B 1. Connect the T otal Access 850 unit to your VT100 system (details found in DLP-1, Connecting a VT100 T erminal or PC to the CRAFT Port ). 2. Log in to the system. 3.
64203376L1-1B © 2004 ADTRAN, Inc. 221 DLP-4 V erifying Communica tions Over an IP LAN Introduction When the Ethe rnet port is conn ecte d to a local area network (LAN), test steps must be performed on the T otal Access 850 to ensure that the unit is communi cating properly over the netw ork.
Section 5 DLP-4 Total Access 850 System Manual 222 © 2004 ADTRAN, Inc. 64203376L1-1B 1. V erify the T otal Access 850 IP address. If you do not already have the IP Address for the T ota l Access 850,.
Total Access 850 System Manual Section 5 DLP-4 64203376L1-1B © 2004 ADTRAN, Inc. 223 From the same computer used in the previous step, T elnet to the T otal Access 850 and verify that the T elnet session is properly opened (see DLP-5, Connecting to the T otal Access 850 Using T elnet ).
Section 5 DLP-4 Total Access 850 System Manual 224 © 2004 ADTRAN, Inc. 64203376L1-1B.
64203376L1-1B © 2004 ADTRAN, Inc. 225 DLP-5 Connecting to the T o t al Access 850 Using T elnet Introduction If the T otal Access 850 is part of a management clus te r connected to the local network, you may use a PC connected to the network to T elnet into the unit.
Section 5 DLP-5 Total Access 850 System Manual 226 © 2004 ADTRAN, Inc. 64203376L1-1B 1. Connect the computer to the T otal Access 850 RCU fa ceplate CRAFT or rear CRAFT port (details in DLP-1, Connecting a VT100 T erminal or PC to the CRAFT Port ). 2.
Total Access 850 System Manual Section 5 DLP-5 64203376L1-1B © 2004 ADTRAN, Inc. 227 12. From a remote c omputer sy stem conn ected to the LAN, T elnet to the T otal Access 850. The following screen appe ars. 13. Enter the user name assigne d in step 5 and press enter .
Section 5 DLP-5 Total Access 850 System Manual 228 © 2004 ADTRAN, Inc. 64203376L1-1B 14. Enter the p assword assigned in step 6. After entering the correct password, the T otal A ccess 850 main menu is disp layed (see below): 15.
64203376L1-1B © 2004 ADTRAN, Inc. 229 DLP-6 Adding/Removing Users and Changing Password Security Levels Introduction All menu items in the T otal Access 850 are protected by passwords of varying security le vels.
Section 5 DLP-6 Total Access 850 System Manual 230 © 2004 ADTRAN, Inc. 64203376L1-1B 1. Connect to the T otal Access 850 using either the 10BASET , rear CRAFT , or RCU faceplate CRAFT interfaces.
Total Access 850 System Manual Section 5 DLP-6 64203376L1-1B © 2004 ADTRAN, Inc. 231 8. Determine the password level for the correspo nding label. The T otal Access 850 cont ains seven different password levels. Th e following char t gives a br ief descriptio n of each le vel.
Section 5 DLP-6 Total Access 850 System Manual 232 © 2004 ADTRAN, Inc. 64203376L1-1B.
64203376L1-1B © 2004 ADTRAN, Inc. 233 DLP-7 Up dating th e Firmware usin g TF TP Introduction The T otal Access 850 supports firmw are updates using TFTP or XMODEM. (Use the 10/100BASET Ethernet port and TFTP from a network serve r , or use XMODEM and the RCU faceplate CRAFT or rear CRAFT interfaces.
Section 5 DLP-7 Total Access 850 System Manual 234 © 2004 ADTRAN, Inc. 64203376L1-1B 1. Connect to the T otal Access 850 using the 10/100BASET interface.
Total Access 850 System Manual Section 5 DLP-7 64203376L1-1B © 2004 ADTRAN, Inc. 235 9. Select S TAR T T RANSFER to start the update. Enter Y to confirm the upgrade.
Section 5 DLP-7 Total Access 850 System Manual 236 © 2004 ADTRAN, Inc. 64203376L1-1B.
64203376L1-1B © 2004 ADTRAN, Inc. 237 DLP-8 Up dating th e Firmware using XM ODEM Introduction The T otal Access 850 supports firmw are updates using TFTP or XMODEM. (Use the 10/100BASET Ethernet port and TFTP from a network server , or use XMODEM and the rear CRAFT or RCU faceplate CRAFT interface.
Section 5 DLP-8 Total Access 850 System Manual 238 © 2004 ADTRAN, Inc. 64203376L1-1B Updating Firmware via the Console Menus 1. Connect to the T otal Access 850 using th e RCU facep late CRAFT (DB-9) or rear CRAFT (RJ-45) interface. Selecting a higher baud rate co nnection make s the file transfer proces s fast er .
64203376L1-1B © 2004 ADTRAN, Inc. 239 DLP-9 Saving the Current Configuration Using TFTP Introduction The T otal Access 850 supports configura t ion transfers from the unit (via the 10/100BA SET Ethernet port) to a TFTP server located on the ne twork.
Section 5 DLP-9 Total Access 850 System Manual 240 © 2004 ADTRAN, Inc. 64203376L1-1B 1. Connect to the T otal Access 850 using the 10/100BASET interface.
64203376L1-1B © 2004 ADTRAN, Inc. 241 DLP-10 Loading a Con f iguration Using TFTP Introduction The T otal Access 850 supports configur a tion uploads from a unit (via the 10/100BASET Ethernet port) to a TFTP server located on the network.
Section 5 DLP-10 Total Access 850 System Manual 242 © 2004 ADTRAN, Inc. 64203376L1-1B 1. Connect to the T otal Access 850 using the 10/100BASET interface.
Total Access 850 System Manual Section 5 DLP -10 64203376L1-1B © 2004 ADTRAN, Inc. 243 10. When the upload pro cess has successfully completed, I DL E displays in the C URRENT T RANSFER S TAT U S field and D OWNLOAD C OMPLETE displays in the P REVIOUS T RANSFER S TAT U S field.
Section 5 DLP-10 Total Access 850 System Manual 244 © 2004 ADTRAN, Inc. 64203376L1-1B.
64203376L1-1B © 2004 ADTRAN, Inc. 245 DLP-1 1 Saving and T ransferring a Current Configuration Using XMODEM Introduction The T otal Access 850 supports configura tion transfers from the unit via the rear CRAFT or RCU faceplate CRAFT interfaces using a VT100 terminal or terminal emulator (with XMODEM).
Section 5 DLP-11 Total Access 850 System Manual 246 © 2004 ADTRAN, Inc. 64203376L1-1B 1. Connect to the T otal Access 850 using the rear CRAFT (RJ-45) port on the back of the T otal Access 850 or the RCU f aceplate C RAFT (DB-9) interface .
64203376L1-1B © 2004 ADTRAN, Inc. 247 DLP-12 Loading a Config uration Using XMODEM Introduction The T otal Access 850 supports configura t ion uploads from a unit via the rear CRAFT or RCU faceplate CRAFT interface using a VT100 terminal or terminal emulator (with XMODEM).
Section 5 DLP-12 Total Access 850 System Manual 248 © 2004 ADTRAN, Inc. 64203376L1-1B 1. Connect to the T otal Access 850 using the rear CRAFT (RJ-45) or the RCU faceplate CRAFT (DB-9) interface located on the front of the RCU.
64203376L1-1B © 2004 ADTRAN, Inc. 249 DLP-13 Saving and Loading T ext Configuration using T erminal Command Line Introduction The T otal Access 850 RCU has the ability to download a text file which contains the configuration of the entire unit. This configuration may then be altered in a te xt editor and uploaded to any T otal Access 850 RCU .
Section 5 DLP-13 Total Access 850 System Manual 250 © 2004 ADTRAN, Inc. 64203376L1-1B Saving the router's configuration 1. Establish a connec tion to the router wit h the VT100 t erminal software either throug h the rear CRAFT or RCU facep late CRAFT port.
Total Access 850 System Manual Section 5 DLP -13 64203376L1-1B © 2004 ADTRAN, Inc. 251 5. Enable "capture" or "logging" in the terminal softwa re, saving it to a file on your computer . 6. Press the SP ACE BAR to continue. The router will then print it s configuration to the terminal screen.
Section 5 DLP-13 Total Access 850 System Manual 252 © 2004 ADTRAN, Inc. 64203376L1-1B.
64203376L1-1B © 2004 ADTRAN, Inc. 253 DLP-14 A.03 to A.04 Firmware Upgrade Introduction The T otal Access line of Integrated Acces s Devices in cludes both the A TM and TDM versions of the T otal Access 850. Until now , the T otal Access TDM units have been running firm ware version A.
Section 5 DLP-14 Total Access 850 System Manual 254 © 2004 ADTRAN, Inc. 64203376L1-1B T ools and Materials Required • VT100 comp atible terminal or comp ut er with terminal emulation software • A.
Total Access 850 System Manual Section 5 DLP -14 64203376L1-1B © 2004 ADTRAN, Inc. 255 4. Reconfigure the unit for the specific application. Upgrading fr om A.03 to A.04 dir ectly (or fr om A.04 to A.03 dir ectly) will erase the unit's configuration.
Section 5 DLP-14 Total Access 850 System Manual 256 © 2004 ADTRAN, Inc. 64203376L1-1B.
64203376L1-1B © 2004 ADTRAN, Inc. 257 DLP-15 Using the ADTRAN Utility Syslog Introduction The T otal Access 850 Syslog Utility records various me ssage types at settable threshold levels to an external Syslog server (software supplied with the T otal Access 850 system ADTRAN Utilities).
Section 5 DLP-15 Total Access 850 System Manual 258 © 2004 ADTRAN, Inc. 64203376L1-1B 1. Log in to the system with maximum rights (see DLP-2, Logging in to the System ). Once you have logged into the T otal Access 850, go to S YSTEM C ONFIG /S YSLOG .
Total Access 850 System Manual Section 5 DLP -15 64203376L1-1B © 2004 ADTRAN, Inc. 259 . •T h e M ONITOR feature allows all Syslog messages to be prefiltered by S YSTEM N AME , S OU RCE , S LOT , and P ORT before displaying these messages to the user and logging the message to the pre-designated monitor log file.
Section 5 DLP-15 Total Access 850 System Manual 260 © 2004 ADTRAN, Inc. 64203376L1-1B • Under the L OG F ILES menu option, the user may erase log files, define Red events, set priorities, and clear Red events. The E RASE L OG F ILES option erases the spec ified text log file.
64203376L1-1B © 2004 ADTRAN, Inc. 261 DLP-16 Connecting the Alarm Co nt acts and the External Input Introduction Alarm connections alert the user when a selected alarm condition ex ists. Pressing the Alarm Cut-Off ( ACO ) switch on the front panel of the T otal Access 850 PSU clears the alarm.
Section 5 DLP-16 Total Access 850 System Manual 262 © 2004 ADTRAN, Inc. 64203376L1-1B 1. Backplane alarm connections (P5) ar e labeled as shown in the table be low and illustrated in the figure.
Total Access 850 System Manual Section 5 DLP -16 64203376L1-1B © 2004 ADTRAN, Inc. 263 2. Alarm relay contact s are open during norma l operation. The alarm relay cont acts close in the event of a local alar m condition or the receipt of an alarm from the T1 Carrier .
Section 5 DLP-16 Total Access 850 System Manual 264 © 2004 ADTRAN, Inc. 64203376L1-1B.
64203376L1-1B © 2004 ADTRAN, Inc. 265 DLP-17 Configuring the T ot al Access 850 for Dual T1 Map s Introduction The T o tal Access 850 with firmware A.04.02 or hi gher has a D UAL T1 M AP feature that allows two network T1 connections for the termin ation of data and voice applications.
Section 5 DLP-17 Total Access 850 System Manual 266 © 2004 ADTRAN, Inc. 64203376L1-1B 1. Connect the T otal Access 850 unit to your VT100 system (details found in DLP-1, Connecting a VT100 T erminal or PC to the CRAFT Port ). 2. Log in to the system with maximum rights (det ails are in DLP-2, Logging in to the System ).
Total Access 850 System Manual Section 5 DLP -17 64203376L1-1B © 2004 ADTRAN, Inc. 267 5. Edit the Primar y T1 Map by pressing <Enter> on E DIT /V IEW T1 M AP [+] .The following screen appears. Figure 2. Primary T1 Map The T1 Map can be mapped to the internal r outer or other available access module.
Section 5 DLP-17 Total Access 850 System Manual 268 © 2004 ADTRAN, Inc. 64203376L1-1B 6. Edit the Secondary T1 Map (DSX Ma p) by pressing <Enter> on E DIT /V IEW DSX M AP [+] . The following screen appears. Figure 3. DSX M ap 7. Left arrow back to DS0 M APS and log of f by pressing <CTRL+L> .
64203376L1-1B © 2004 ADTRAN, Inc. 269 ADTRAN UTILITIES This section provides in structions for configurin g and using the ADTRAN Ut ilities sof tware programs including T eln e t, VT 10 0, Sys log , an d T FTP . ADTRAN delivers several PC software utilities with th e T otal Access 850.
Section 6 ADTRAN Utilities Tot al Access 850 System Manual 270 © 2004 ADTRAN, Inc. 64203376L1-1B 1. T ELNET UTILITY Access the T elnet program remotely through the Ethern et port.
Total Access 850 System Manual Section 6 ADTRAN Utilities 64203376L1-1B © 2004 ADTRAN, Inc. 271 Session Menu Click on S ESSION to open the T elnet session. Connect Opens dialog box for setting H OST N AME and P ORT parameters for a T elnet session. Also lets you E DIT E NTRY , A DD N EW entry , and D ELETE stored entries.
Section 6 ADTRAN Utilities Tot al Access 850 System Manual 272 © 2004 ADTRAN, Inc. 64203376L1-1B Disconnect T erminates the T elnet session. T o re-establish the session, se lect C ONNECT from S ESSION M ENU or press E NTER three times. This action restores the previous connection.
Total Access 850 System Manual Section 6 ADTRAN Utilities 64203376L1-1B © 2004 ADTRAN, Inc. 273 Help Menu Provides online help for using the ADTRAN Utilities. Content s Opens the online help. IP St atus Displays the local port address an d the status of the connection.
Section 6 ADTRAN Utilities Tot al Access 850 System Manual 274 © 2004 ADTRAN, Inc. 64203376L1-1B Session Menu Opens VT100 terminal emulation session. Connect Opens a specified serial port for a VT100 session. Disconnect Closes a specified serial port at the end of a VT100 session.
Total Access 850 System Manual Section 6 ADTRAN Utilities 64203376L1-1B © 2004 ADTRAN, Inc. 275 AutoRepeat Repeats characters you select from the key board, if you hold down th e key . Capture Menu Identical to the T elnet C APTURE M ENU (see Capt ure Menu on page 272).
Section 6 ADTRAN Utilities Tot al Access 850 System Manual 276 © 2004 ADTRAN, Inc. 64203376L1-1B Figure 4. TFTP Server Interface Only one configuration transfer session (upload or download) may be active at a time.
Total Access 850 System Manual Section 6 ADTRAN Utilities 64203376L1-1B © 2004 ADTRAN, Inc. 277 Help Provides online help a nd version information. Content s Opens online help. About Displays version and owner information. 4. STATUS FIELD This field displays general informatio n about port and transfer status.
Section 6 ADTRAN Utilities Tot al Access 850 System Manual 278 © 2004 ADTRAN, Inc. 64203376L1-1B.
64203376L1-1B © 2004 ADTRAN, Inc. 279 MIBS This section is divided into two part s: (1) SNMP in formation for TDM unit s and (2) SNMP information for A TM units. Each section det ails the Management Info rmation Bases (MIBs) supported, MIB Compilation Order , T raps Supported, and MIB V ariables supported.
Section 7 MIBs Total Access 850 System Manual 280 © 2004 ADTRAN, Inc. 64203376L1-1B 1. MIBS SUPPORTED BY TDM UNIT S For this section, TDM units r efers to T otal Access 850 units running A.04 firmwar e or later . A TM units refers to T otal Access 8 50 units running C.
Total Access 850 System Manual Sec tion 7 MIBs 64203376L1-1B © 2004 ADTRAN, Inc. 281 2. MIB COMPILATION ORDER FOR TDM UNIT S 3. T RAP S SUPPORT ED BY TDM UNIT S IANAifT ype-MIB PerfHist-TC-MIB SNMPv2.
Section 7 MIBs Total Access 850 System Manual 282 © 2004 ADTRAN, Inc. 64203376L1-1B 4. MIB V ARIABLES SUPP ORTED BY TDM UNITS SNMPv2 states the su pported MIB variables by the follo wing method: The unit will have a MIB called T A 6XX.mi2 that w ill describe the SNMP variab les supported.
Total Access 850 System Manual Sec tion 7 MIBs 64203376L1-1B © 2004 ADTRAN, Inc. 283 6. MIB COMPILATION ORDER FOR A TM UNIT S 7. T RAP S SUPP ORTED BY A TM UNITS 8.
Section 7 MIBs Total Access 850 System Manual 284 © 2004 ADTRAN, Inc. 64203376L1-1B ifMtu RO ifS p eed RO ifPhysAddress RO ifOperS tatus RO ifInOctets RO ifInUcastPkts RO ifInNUcastPkts RO ifInDiscar.
Total Access 850 System Manual Sec tion 7 MIBs 64203376L1-1B © 2004 ADTRAN, Inc. 285 ipAddrEntry ipAdEntAddr RO ipAdEntIfIndex RO ipAdEntNetMask RO ipAdEntBcastAddr RO ipAdEntReasmMaxSize RO ipRouteT.
Section 7 MIBs Total Access 850 System Manual 286 © 2004 ADTRAN, Inc. 64203376L1-1B icmpInAddrMasks RO icmpInAddrMaskRep s RO icmpOutM sgs RO icmpOutEr rors RO icmpOutDest Unreachs RO icmpOutT imeExc.
Total Access 850 System Manual Sec tion 7 MIBs 64203376L1-1B © 2004 ADTRAN, Inc. 287 tcp: tcpRtoAlgorithm RO tcpRtoMin RO tcpRtoMax RO tcpMaxConns RO tcpActiveOpens RO tcpPassiveOpens RO tcpAttemptFa.
Section 7 MIBs Total Access 850 System Manual 288 © 2004 ADTRAN, Inc. 64203376L1-1B egp: egpInMsgs RO egpInErrs RO egpOutM sgs RO egpOutErro rs RO egpNeighSt ate RO egpNeigh Addr RO egpNeighA s RO eg.
Total Access 850 System Manual Sec tion 7 MIBs 64203376L1-1B © 2004 ADTRAN, Inc. 289 dsx1CurrentT able dsx1CurrentEntry dsx1Curren tIndex RO dsx1CurrentESs RO dsx1CurrentSESs RO dsx1CurrentSEFs RO ds.
Section 7 MIBs Total Access 850 System Manual 290 © 2004 ADTRAN, Inc. 64203376L1-1B dsx1FracT able dsx1FracEntry dsx1Frac Index RO dsx1Frac Number RO dsx1FractIfIndex RO snmp: snmpInPkts RO snmpOutPk.
Total Access 850 System Manual Sec tion 7 MIBs 64203376L1-1B © 2004 ADTRAN, Inc. 291 atm: atmInterfac eT ab le atmInterfac eEntry atmI nterfaceMa xVpcs RO atmInterfa ceMaxVccs RO atmInterfa ceConfVpc.
Section 7 MIBs Total Access 850 System Manual 292 © 2004 ADTRAN, Inc. 64203376L1-1B atmVclLast Change RO atmVclReceiveTra f ficDescrIndex RO atmVclT ransmitT raf ficDescrIndex RO atmVccAal T ype RO a.
Un punto importante, dopo l’acquisto del dispositivo (o anche prima di acquisto) è quello di leggere il manuale. Dobbiamo farlo per diversi motivi semplici:
Se non hai ancora comprato il ADTRAN Total Access 850 è un buon momento per familiarizzare con i dati di base del prodotto. Prime consultare le pagine iniziali del manuale d’uso, che si trova al di sopra. Dovresti trovare lì i dati tecnici più importanti del ADTRAN Total Access 850 - in questo modo è possibile verificare se l’apparecchio soddisfa le tue esigenze. Esplorando le pagine segenti del manuali d’uso ADTRAN Total Access 850 imparerai tutte le caratteristiche del prodotto e le informazioni sul suo funzionamento. Le informazioni sul ADTRAN Total Access 850 ti aiuteranno sicuramente a prendere una decisione relativa all’acquisto.
In una situazione in cui hai già il ADTRAN Total Access 850, ma non hai ancora letto il manuale d’uso, dovresti farlo per le ragioni sopra descritte. Saprai quindi se hai correttamente usato le funzioni disponibili, e se hai commesso errori che possono ridurre la durata di vita del ADTRAN Total Access 850.
Tuttavia, uno dei ruoli più importanti per l’utente svolti dal manuale d’uso è quello di aiutare a risolvere i problemi con il ADTRAN Total Access 850. Quasi sempre, ci troverai Troubleshooting, cioè i guasti più frequenti e malfunzionamenti del dispositivo ADTRAN Total Access 850 insieme con le istruzioni su come risolverli. Anche se non si riesci a risolvere il problema, il manuale d’uso ti mostrerà il percorso di ulteriori procedimenti – il contatto con il centro servizio clienti o il servizio più vicino.
