Manuale d’uso / di manutenzione del prodotto 9060A MP del fabbricante Cabletron Systems
Vai alla pagina of 32
1 IP Kamera 9060A –MP (Mega Pixels) User Guide IP Kamera 9060A-MP Manual version: 1.00 Date: 2006.08.
2 Caution: Any changes or modifications not approved by the party responsible for compliance could void the user’s authority to operate the equipment.
3 Table of Contents 1. PRODUCT OVERVIEW ............................................................................................... 4 FEATURES ........................................................................................................
4 1. Product Overview IP Kamera 9060A-MP (Mega Pixels) has a built-in a web server which can transfer video & audio via a data network and monitor your home /office / co mmercial facility form any corner of the world.
5 2. Physical Description BOX CONTENT IP Kamera package content ： 1 x IP Kamera 9060A-MP (Mega Pixels) 1X Ceiling mount 1 x RJ 45 internet line 1 xTansformer 5V 1.
6 3. Interface Description Front Panel: 1. Power indicator (LED) 2. Sensor: 1/2 CMOS Rear Panel: 1. Reset ON / OFF ( Left - OFF & Right –ON ) 2. DC Power: 5V, 1.
7 4. Installation Before installation: Before using IP Kamera 9060A-MP, check as follows. Confirm your package content A computer connects with LAN Hardware installation 1. Plug in RJ 45 line to connect 9060A-MP (Mega Pixels) with HUB 2. Connect the HUB into your modem.
8 5. Initialization Set up on Ethernet Click “ipEdit.exe” . Please affirm the power of 9060A-MP (Mega Pixels) had been turn on and the Ethernet connection of RJ45 is correct.
9 A. LOCAL Devices area: IPEDIT will searching all IP Products 9XXXseries in the same local Ethernet, the default name of 9060A-MP (Mega Pixels) is Cam-location, and display the information as select 1. Double click the IP address, it will be covered by dark stripe, its name, and IP will be displayed below.
10 IP 9060A-MP (Mega Pixels) Default static dynamic IP Address is 192.168.0.100. the last digit of IP address (default is 100) can be any number between 1~254, but can not be same as your PC. If using in any PC, just use HUB and type t he 192.168.0.100 in Browser or use “ipedit.
11 B. Internet online devices: By setting the server address in IP server of advanced setting page, user can easily to get the IP address of IP Kamera 9060A-MP on internet by name searching.
12 Work with Yahoo /MSN Messenger 1. Work with Yahoo /MSN Messenger: We use Y ahoo for instance. Select the friend you would like to send your video. For instance, we pick up Yahoo Helper. 2. Choose T1/E1 when system ask y ou about the Internet connecting speed.
13 4. You can type in appointed IP address (No matter Real IP or Dynamic IP) and confirm by click “Add” and choose if reverse the out streaming video. We support: A. Normal B. Flip Vertical C. Flip Horizontal D. Rotate 180 And you can also adjust the color, Brightness, contrast, Hue, Saturation, Sharpness and ETC.
14 6. WEBPAGE FUNCTIONS When your computer configured IP address, you can finish setting through IE browser. Click the picture in the window of IPEdit directly; you can open the web page of IP9060. Login setting General user: Default general ID is guest, Password is password.
15 LiveView setting After 5 minutes, you will get the video of 9060A-MP. If system inquire to download ActiveX please select YES / download Most of upside function key (such as Admin istration Update and ETC) can only be used by Administrator. Image Setting Setting windows is on the left; it’s used to set up image parameter.
16 3. Anti-Flicker: You can get top-quality picture for we had set up the picture condition on the basis of different illumination environment. You can choose environment such as “Out Door”,” indoor 50hz AC illumination” or ” indoor 60hz illumination ”.
17 Advanced quick setting Advanced menu will be display when right cl ick mouse on the image windows, you can set up image, record AVI, record WMV, zoom, motion detect, splits, rotate, set time, and set pictures path.
18 1. Image: parameter setting Right click mouse on the motion image, choose “image” can open corresponding windows. Users can adjust Brightness, Contrast, Saturation, Sharpness, Smooth and Awb(Auto White Balance). Click “rotate” will circumrotate the image.
19 If select “ For playback on most pocket PCs: record smaller file than select to ““ For local playback” 4. Zoom Right click mouse on the motion image and choose “zoom”. Users use mouse to draw a frame round to select image, let go will be amplificatory to old image, when right click mouse again, the image will revert.
20 5. Motion detect In this page, you can enable Motion detection function and setup the pictures saving direction: in PC / by e-mail / save in Ftp. The r esolution of detect pictures is 1600x 1200. Use this function need to enabled Event of Event Tr igger page first (click submit to save setting after select).
21 5. Splits: split video in to multi screen. 1 / 4 / 9 / 16 6. Rotate: Adjust the pictures: 180 7.Set time: Setup by same as local PC or NTP se rvere.
22 8. Set pictures path: Fast select the direction for SNAP and Motion detection. Network setting This menu can set up or change the assignment of IP CAM network connections. There is three chooses: STATIC, DHCP, and PPPOE. A. STATIC work for both real and dynamic IP address.
23 A .Set up STATIC mode, steps: The IP address of IP camera 9060A-SL should in t he same subnet with your PC, subnet mask, and default gateway mast same as 9060A-SL also. For example, the default IP addr ess of 9060A-SL is 192.168.0.100, 1.Type the new IP address, Submask, Gate way in the relevant text windows.
24 After amend the setting please do cli ck “Submit “to save the setting. B. Set up DHCP mode, steps: 1.Click DHCP, and then click “Submit” 2.Click “Reboot”, its need to wait for 15-20 seconds to enable again. 3.Use Search Tools; click Update to find IP CAM.
25 1.Click PPPOE 2.Type User Name and Password, Click ”Submit” 3. Click “Reboot”, its need to wait for 15-20 seconds to enable again. 4. Use Search Tools “ IPEdit ”; click Update to get IP address. If still see same IP address, please click PPPOE in IPEDIT, submit and then click update.
26 D. HTTP Server: Appoint port number of HTTP, default is 80. HTTP port setting can help use More than one IP Kamera for customer had only one real IP.
27 B. FTP (File Transfer Protocol) Steps: 1. Fill in Ftp Server (IP/ Host), Account ID, Password, and Ftp mode. 2. Click “Submit” to save setting. C. DDNS (Dynamic Domain Name Server) Steps: Before use DDNS service, please create your own account in Websitehttp://www.
28 Administration setting By this functions. User can set 9060A-MP (M ega Pixels)’s name, Administration’s account, general user’s account and black list of IP address. When there is two or more 9060A -MP (Mega Pixels), we need to distinguish every one of them.
29 Event Trigger Event trigger: In this page, users can select to ENABLE one or two Motion Detect functions and the way to transfer detect pictures: Save in PC, Send by E-mail, Save in Ftp server. Click “Submit” after type account/passwor d to relevant text windows.
30 Advance (Timer schedule) setting A. Timer Schedule : users can choose appointed peri od (EVERYDAY) for SNAP (take pictures every setting interval) and Motion detection. Format: Hour Minute: Hour Minutes (From H/M to H/M) After select time please click” Add ” then the appointed time will show on bar.
31 Update setting By update functions, user cans online updat e 9060 firmware to get more functions; 1. Press “browse” key to chose new BIN file. 2. Press ”Submit” key to upload, it will holding 7-10 secs (100M Ethernet) 3. The windows will showing “waits syst em Reboot”, it means upload finished.
32 Q 2: The Web Kamera does not launch? A: Upgrade Intern et Explorer to 5.0 or higher vers ion and che ck If the subnet is same as your P C. Please refer page 9 for the setting. Sometimes the web camera base cannot bring 'index.html' from the web Camera when the Internet Explorer version is fewer than 4.
Un punto importante, dopo l’acquisto del dispositivo (o anche prima di acquisto) è quello di leggere il manuale. Dobbiamo farlo per diversi motivi semplici:
Se non hai ancora comprato il Cabletron Systems 9060A MP è un buon momento per familiarizzare con i dati di base del prodotto. Prime consultare le pagine iniziali del manuale d’uso, che si trova al di sopra. Dovresti trovare lì i dati tecnici più importanti del Cabletron Systems 9060A MP - in questo modo è possibile verificare se l’apparecchio soddisfa le tue esigenze. Esplorando le pagine segenti del manuali d’uso Cabletron Systems 9060A MP imparerai tutte le caratteristiche del prodotto e le informazioni sul suo funzionamento. Le informazioni sul Cabletron Systems 9060A MP ti aiuteranno sicuramente a prendere una decisione relativa all’acquisto.
In una situazione in cui hai già il Cabletron Systems 9060A MP, ma non hai ancora letto il manuale d’uso, dovresti farlo per le ragioni sopra descritte. Saprai quindi se hai correttamente usato le funzioni disponibili, e se hai commesso errori che possono ridurre la durata di vita del Cabletron Systems 9060A MP.
Tuttavia, uno dei ruoli più importanti per l’utente svolti dal manuale d’uso è quello di aiutare a risolvere i problemi con il Cabletron Systems 9060A MP. Quasi sempre, ci troverai Troubleshooting, cioè i guasti più frequenti e malfunzionamenti del dispositivo Cabletron Systems 9060A MP insieme con le istruzioni su come risolverli. Anche se non si riesci a risolvere il problema, il manuale d’uso ti mostrerà il percorso di ulteriori procedimenti – il contatto con il centro servizio clienti o il servizio più vicino.
