Manuale d’uso / di manutenzione del prodotto TeraStation TS7120r Enterprise del fabbricante Buffalo
Vai alla pagina of 160
T eraSta tion 7000 U ser Manual www .buf falotech.com 35012398-05 2014-01.
2 C on tents Chapter 1 Installa tion ........................................................ 9 Diagrams ............................................................................................... 9 Installation ...................................
3 W orking with R AID Arr a ys .................................................................34 Using JBOD ....................................................................................................34 Changing RAID Mode ...................
4 Chapter 5 Backup ............................................................ 60 Back Up from the T eraSta tion ...........................................................60 Preparing a Backup Destina tion ...........................................
5 Disabling Playback from Specific De vices ..................................................83 iT unes Ser v er ......................................................................................84 C onfiguration .................................
6 V ault Admin ................................................................................................ 104 Sur v eillance V ideo Manager ..................................................................... 105 Network A ctivity .............
7 Ac c essing from a NFS Client ........................................................... 127 Encr ypting Da ta T ransmission ....................................................... 129 Encr ypting Settings Data .....................................
8 Mount as Networ k Drive............................................................................ 147 Changing the IP Addr ess ........................................................................... 148 NAS Naviga tor2 for Mac ................
9 Chapter 1 Installa tion Diagrams 1 Po wer Button On: Pr ess the power button to turn on the T eraStation. Off : Press the po wer button twice within 3 seconds to turn off the T eraStation. 2 Reset Button This resets the T eraStation. Use a toothpick or similar object to hold down this switch for a sec ond, then release it.
10 USB hubs are not supported. 9 Po wer C onnectors Use the included power cables t o connect these to a UPS, surge protector , or outlet. 10 Pow er Status Glowing green: po wer is on Blinking green: power is off Glowing red: error Blinking red: power supply fan error 11 UPS Port Connect to a UPS.
11 3 F ollow the steps on the screen t o connect the T eraStation ’ s Ethernet and power cables and turn it on. Note: Use LAN port 1 for initial setup . After setup, y ou may connect a second cable to LAN port 2. If you use LAN port 2, configure the IP address at Network - IP Address in Settings.
12 If you are prompt ed to enter the administrator passw ord f or the T eraStation, it is “passwor d” by default. 8 Right-click on your T eraStation ’ s icon and choose S ettings . 9 Changing the passwor d from the default in File Sharing - Users - admin - Edit is recommended.
13 Notes: • F or best results, use an NTP server to maintain the time settings on the T eraS tation and other network devices. Clocks for the network devices may run a t slightly differen t speeds. If these devices get out of sync it may cause network problems.
14 unplugging it. Y ou can also shut it down and restar t it r emotely from Settings. Shutting down or Restart from Settings: 1 Double -click the icon. 2 Right-click your T eraStation ’ s icon and selec t Settings. F or M ac OS, select the T eraStation’ s icon while holding down the control key , then selec t Settings .
15 5 Click at the top-right of Settings and choose either Restar t or Shut Down . When all the LEDs on the front of the T eraStation turn off, the shut down process is complet e. Changing the A dministra tor P asswor d After initial setup , follow this proc edure to change your passw ord.
16 3 Enter your username and passw ord. 4 In Settings, navigate to F ile Sharing - Users . 5 Click on admin . 6 Enter the new passwor d (twice). Click OK .
17 Reco very Drive 1 Inser t a 1 GB or larger USB flash driv e into a USB port on the T eraStation. Note: All data on the USB flash drive will be erased! 2 In Settings, navigate to Management - Restor e/Erase - USB Options . 3 Select “Creat e a USB drive for syst em recov er y” .
18 Chapter 2 C onfigura tion Configure and administ er your T eraStation using the Settings inter face , accessible from a br owser window . Open the interface using the procedure below or type the T eraSta tion ’ s IP address in the URL field of your bro wser .
19 Username/P assword C ombinations: Username P assword Settings Available admin password All guest blank T eraStation ’ s name (read- only) your username your passwor d T eraStation ’ s name (read- only) and your passw ord.
20 Chapter 3 A cc ess Restric tions Y ou may restrict access to specific shar ed folders, including external USB drives . Notes: • Access r estrictions can be set separately for each shared f older , but not for folders within the shared f olders. • Configure ac cess restrictions through Settings.
21 Notes: • Names may contain up to 27 alphanumeric characters , hyphens (-), and underscor es (_). Do not use a symbol as the first character in a name. • The description may contain up t o 75 alphanumeric characters, hyphens (-), underscor es (_), and spaces.
22 Ac counts Y our T eraStation username and password should be the same as your Windows username and password . If they are differen t, you may not be able to ac cess folders on the T eraS tation with access restrictions configured .
23 Notes: • Usernames may contain up t o 224 characters, including hyphens (-), underscor es (_), periods (.), !, #, &, @, $, *, ^, and %. Do not use a symbol as the first character . • F or Windo ws 8.1 or Windo ws 8, use a local username instead of your W indows Live ID .
24 3 Enter settings, then click OK . Notes: • Group names may con tain up to 224 alphanumeric characters, hyphens (-), undersc ores (_), and periods (.). Do not use a symbol other than an underscore (_) as the first character . • Group descriptions may contain up t o 75 alphanumeric characters, hyphens (-), underscor es (_), and spaces.
25 3 Click Edit . 4 Enable “ A ccess Restrictions” . 5 Select the level of access for the user or gr oup you added. : Read and write access allow ed : Read access allowed : Access pr ohibited 6 Click OK . Notes • The example above shows ac cess restriction by user .
26 the T eraStation: info , spool, lost+found , global, printers, homes , lp, auth test, ram, msdfs_r oot, mt-daapd, usbdisk# (where # is a number , for example: usbdisk1) • Don’t use the f ollowi.
27 2 Select Work group/Domain . 3 Click Edit . 4 Select “ Active Director y” , then click Next . 5 Click Y es . 6 Enter the desired settings , then click OK . 7 Choose F older Setup . 8 Click a shared folder tha t you want to set acc ess restrictions for .
28 9 Click Edit . 10 Enable “ Access Restrictions” . 11 Selec t the lev el of access for the user or g roup: : Read and write access allow ed : Read access allowed : Access pr ohibited 12 Click OK .
29 4 Click Edit . 5 Select “NT Domain” , then click Next . Note: T o use Active Directory from Window s 2000 or Windo ws Ser ver 2003, select “ Active Director y” instead of “NT Domain ” . 6 Click Y es . 7 Enter settings and click OK . 8 Click to the right of “Folder Setup ” .
30 13 Click OK . Notes: • If you change the T eraStation’ s name, you will no longer be able to use domain users and g roups or access r estric- tions. T o repair this , rejoin the domain. • If both read-only and read & write permissions are given to a user , the user will have r ead-only access.
31 5 Click Y es . 6 Enter a workgr oup name. Select “ Assign authorization to external SMB server ” and enter the authentication server ’ s IP address (rec ommended) or name. Check “ Automatic user registra tion ” and “Use shared folder f or authorization testing ” , and enter the name of the folder to use.
32 12 Selec t the lev el of access: : Read and write access allow ed : Read access allowed : Access pr ohibited 13 Click OK . Notes: • If access restrictions are set for users or gr oups from the authentication server , guest and anonymous connec- tions will not be possible with AFP or FTP connections.
33 Chapter 4 Managing St or age RAID Arra y s T eraStations support many types of RAID. The type of R AID arra ys available f or use depends on how many drives ar e installed in your T eraSta tion. Notes: • If you change the RAID mode, all data on the array is delet ed.
34 RAID 51 RAID 51 arrays are a vailable for T eraSta tions with 6 or more hard drives . In this mode, two RAID 5 arrays are c ombined into a RAID 1 array . The t otal usable space for 6 drives in a RAID 51 arra y is 2 x the capacity of the smallest drive.
35 3 Click Delete RAID Array . Once JBOD mode is configured , create shar ed folders on each drive to use them. Changing RAID Mode T o change the RAID mode, first put the drives in JBOD . 1 Select RAID. 2 Click the array to delete . Note: If the “R AID Mode ” field is blank , the arra y is already in JBOD .
36 Note: After changing the RAID mode, cr eate a shared f older . C onfiguring a Hot Spare If you have a hot spar e configured and an array fails , the T eraStation immediately switches over t o the hot spare.
37 RMM (RAID Mo de Manager) With RMM, y ou can create or expand a RAID array without er asing the data on the drives. Changing from JBOD to RAID 1 Y ou must have at least two driv es available in JBOD (not in a RAID array) to build the RAID 1 array with RMM.
38 Changing the RAID mode while adding a drive: • Selec t the drive you w ant to add to the RAID array and choose the mode f or the array . Enter the “C onfirm Operation ” number and click OK . • The “Confirm Opera tion ” screen will open.
39 5 Move the RAID scanning switch to the position to enable RAID scanning. Note: Normally “I15” information message or code will be notified in NAS Navigat or2, Settings, or error LED , howev er , it may not be displa yed if your T eraStation’ s firmware v ersion is 2.
40 Dismounting Drives If the T eraStation is power ed on, dismount drives (internal and external) befor e unplugging them. Y ou may dismount any drive fr om Settings. If the T eraStation is off , then all drives are alr eady dismounted and may be unplugged saf ely .
41 3 Select the drive to test, then click Check Disk . 4 Click Check . Y ou have the option of deleting information files fr om Mac OS during the check if desired.
42 3 The S.M.A.R.T . information for the drive will be displa yed. Diff erent inf ormation may be displayed depending on the brand of drives in your T eraStation. Critical attributes are display ed in bold. Attributes with curren t value less than or equal to the threshold value ma y be significant.
43 4 Select a format type, then click F ormat . 5 The “Confirm Operation ” screen will open. Enter the displayed number , then click OK . 6 Depending on the size of your drive , the format may take sev eral minutes or several hours t o complete. “I20 DISKx F ormatting” will be displayed in NAS Navigator2 until the f ormat is complete.
44 Encr ypting Driv es Internal drives (and arrays) can be encrypted with 128-bit AES during formatting. Encrypted drives and arrays ar e then readable only from that specific T eraStation. T o unencr ypt a driv e or array , uncheck “Encr yption ” and format it again.
45 • All logs deleted If you remov e a drive and then erase all data on the T eraStation, NAS Navigator2 will show the err or “HDx Error E22 HDx Can ’t Mount” where X is the hard drive you r emoved. Y ou can still use the T eraStation. F ollow the procedur e below to completely and permanently er ase all data from your T eraStation.
46 • If both user and group quotas are configur ed for a user , the most restrictive quota will always apply . Quotas for U sers F ollow this procedur e to limit the total drive space a vailable for a user . 1 In Settings, click to the right of “Users” .
47 Size Limits If L VM is enabled , volumes can be created with maximum siz e limits. Up to 32 L VM and iSCSI volumes are supported. 1 In Settings, click Drives . 2 Select L VM . 3 Select the drive where the volume will be located and click Enable L VM on Volume .
48 8 Configure the desir ed settings, then click OK . 9 Click Close . 10 Click Close . 11 Navigate to F ile Sharing - F older Setup . 12 Click Create F older .
49 Notes: • The name may con tain up to 27 alphanumeric characters, hyphens (-), and underscor es (_). Do not use a symbol as the first character . • The description may contain up t o 75 alphanumeric characters, hyphens (-), underscor es (_), and spaces.
50 Using the T eraStation as an iSCSI De vice Introduction iSCSI is a protocol f or carr ying SCSI c ommands over IP networks. Unlike traditional SAN pr otocols such as fibre channel , which requires special-purpose cabling , iSCSI can be run over long distances using existing netw ork infrastructure.
51 W indows 8.1, Window s 8, W indows 7, Window s V ista, W indow s Ser v er 2008, W indows Server 2012 If you are using W indows 8.1, W indows 8, W indows 7, W indows V ista, Windo ws Ser ver 2008, or Windows Server 2012, the Microsoft iSCSI Sof tware Initiator is alr eady installed on your computer .
52 10 Enter a volume name, v olume description, volume, and siz e, then click OK . 11 Click Close . 12 Connect the new volume. The process for this will depend on your iSCSI software .
53 Mutual Authen tication with the T eraStation The T eraStation can per form mutual authentica tion (two-way authentication). Dual passwords ensur e that only authorized client computers can acc ess the volumes on the T eraStation.
54 OS. Expanding the V olume Size Y ou can expand the size of a volume . If the iSCSI volume is on an L VM- enabled drive or array , you can also create or delete the volume . 1 In Settings, click Drives . 2 Choose iSCSI . 3 Click the volume you wan t to expand.
55 Navigate to Driv es - iSCSI . Select the iSCSI volume to disconnect and click Disable Connection . T o reconnect the volume, click Enable Connection . Similarly , you may c onnect or disconnec t a v olume from the editing page by enabling or disabling V olume Connection .
56 3 Click the Security tab. 4 Click Edit . 5 Enable “ A ccess Restrictions” , enter the username and password, and click OK . Note: T o use mutual authentication with access r estrictions, config.
57 5 Click Close . Mutual Authen tication Ac cess Restrictions by Username and P assw ord T o set access restrictions using mutual authentication in addition to regular ac cess restrictions, configure the settings as shown below .
58 • Do not change the order of the hard drives in the T eraStation. For e xample, pulling out drive 1 and replacing it with drive 2 may cause data to be c orrupted or lost. • If a new drive is not recogniz ed, click Rediscov er Disk in Settings. • If two drives fail at the same time, replac e and resync them one at a time.
59 2 Select the hard drive with the flashing status LED and click Dismount Disk . 3 The status LED will stop flashing and glow st eadily . 4 Unlock the failed drive by pushing the unlock button and swing ing the lock mechanism out. 5 Pull out the hard driv e car tridge and r emove it from the T eraStation.
60 Chapter 5 Backup Back Up from the T eraSta tion Y ou can back up T eraStation folders to: • A different folder on the T eraStation • Another LinkStation on the network • Another T eraStation on the network Y ou can also configure backup jobs from Easy Setup .
61 4 Click Add , enter the IP addr ess of the target LinkStation or T eraSta tion, and click Close . If your setup meets the requirements belo w , you don ’ t have to configur e these settings: • The source and target T eraSta tions are on the same network.
62 2 Click to the right of “Backup” . 3 Click Create New Job . Note: Up to 8 backup jobs can be configured . 4 Select backup settings such as date and time to run. The follo wing types of backup jobs may be selected: T ype F iles included Normal backup All files in the source will be backed up to the destina tion.
63 T ype F iles included Management backup Each time a backup is executed , management information is stor ed, and only files that have changed ar e copied or deleted.
64 Note: If the backup task is not added to the list, try refreshing the browser . 11 Click Close . Replication Replication copies all data from a shar e to a share on a diff erent T eraStation. This is an easy wa y to configure a reliable system to pr ovide data protection in the event y our main T eraStation fails.
65 7 Click Browse under “Replication T arget” . 8 Select the shared folder that will be the replication tar get, then click OK . 9 Click OK . 10 Click Y es . Notes: • During setup, y ou may choose to encrypt and/or compress replication data. Encrypted data will transferr ed securely on the network.
66 tion. • Y ou can select subfolders as the replication sourc e. F olders whose names contain mor e than 80 alphanumeric characters cannot be selected. • If a “Replication I33 ReplicateF ailur e” error occurs, na vigate to Backup - Replic ation and click Sync .
67 The main and backup T eraStations should be the same model and capacity. U se fixed IP addresses f or both T eraStations. Because the IP address of the T eraStation designated as the backup cannot be changed, set its IP addr ess before configuring failover .
68 show I51 messages and the backup T eraStation will also show an I48 message. 7 In the backup T eraStation ’ s Settings, navigate t o Backup - F ailover and ac cept failover backup status . In the main T eraStation ’ s S ettings , the “ This T eraStation is being configured as a failo ver main device.
69 5 Select AFP (Mac) to LAN Protocol Suppor t and click OK . 6 Click OK . 7 Click Close . 8 Click Backup . 9 Click the icon to the right of “ Time Machine ” . 10 Click Edit . 11 Click Browse . 12 Selec t the shar ed folder that you set in the pr evious step , then click OK .
70 16 On the Mac, open System Pr eferences . 17 Click Time Machine . 18 Click Choose Backup Disk . 19 Selec t the T eraStation, then click Use for Backup . 20 Enter a username and password with the rights to ac cess the shared f older of the T eraStation, then click Connect .
71 Note: If access restrictions are not configur ed on the target share, log in with the administr ator account . The default username and password f or the administrator accoun t are “admin ” and “passw ord” . I f acc ess restrictions are configured , log in with an account with write privileges.
72 6 Select the shared folder for r emote replication, then click OK . Note: This f older is used by Amazon S3. F iles are not added to the selected f older and the amount of used space does not increase. 7 Enter the bucket name, ac cess key ID , and secret acc ess key of the Amazon S3 bucket, then click OK .
73 Chapter 6 Remot e A c cess W ebAc cess W ebAccess is a pr ogram f or accessing the files in the shared f older of your T eraStation from your comput er , smartphone, or tablet through the Internet.
74 • T o use SSL encr yption f or more secure data tr ansfers, enable “HT TPS/SSL Encryption” . • Y ou may use the default BuffaloNAS.com reg istration, or disable to use a diff erent DNS server . • Choose a “BuffaloNAS.com name” for your WebAc cess account.
75 they do locally . If access restrictions are not set for the shar ed folder , then this option will not be shown. • When a user or group can ac cess a folder through WebA ccess depends on a combination of WebAc cess settings and the shared folder’ s settings.
76 4 F rom “ T arget Folder” , select the shared folder that will be c onnected. Notes: • The selected folder is used internally b y “ W ebAccess Remote ” . Files are not added to this f older and the amount of used space does not increase .
77 2 Open F older Setup . 3 Choose a folder to enable r emote FTP access on. 4 Click Edit . 5 Select read- only or r ead & write for the shared f older ’ s attribute, check “FTP ” under “LAN Pr otocol Support ” , then click OK .
78 Chapter 7 BitT orr ent BitT orrent is a protoc ol for distributing large amounts of data efficiently . The information in this chapter is f or users who are familiar with BitT or r ent. Note: Use compatibility mode to use Download Manager with Windows 8.
79 5 Select the shared folder where the downloaded file will be sa ved, then click OK . 6 Click OK . 7 Move the BitT orrent switch to the position to enable BitT orrent. 8 Click the icon to the right of “BitT orrent” . 9 Click Open Download Manager .
80 Chapter 8 Multimedia DLNA DLNA is a set of guidelines for sharing digital media. The T eraStation includes a DLNA server compliant with the DLNA guidelines. The movies, photos, and music sa ved on this product can be played back on DLNA-compliant T Vs, st ereo equipment, game consoles, and other devic es within the network.
81 4 Enable “DLNA ” under “LAN Protoc ol Suppor t” , then click OK . 5 Click Ser vices . 6 Move the DLNA switch to the position to enable DLNA. 7 Click the icon to the right of “DLNA Ser ver” . 8 Click Edit . 9 Select an inter val f or DLNA ser v er database updates and click OK .
82 1 In Settings, click Ser vices . 2 Click the icon to the right of “DLNA Ser ver” . 3 Click DLNA Client Acc ess Permissions . 4 A list of the MAC addr esses, IP addresses , and device names of the DLNA-compatible devices connected to the same network as the T eraStation is display ed.
83 Disabling Playback fr om Specific Devices Y ou may block specific DLNA devices from pla ying back media content. 1 In Settings, click Ser vices . 2 Click the icon to the right of “DLNA Ser ver” . 3 Click DLNA Client Acc ess Permissions . 4 Uncheck the devices you do not want t o allow to play media and click OK .
84 Video files .avi, .divx, .asf , .mpg, .mpe , .m1v , .vob , .mts , .m2ts, .m2t, .mpeg, .mpeg2, .v dr , .spts, .tp, .ts, .3g p, .mov , .m4v , .wmv , .dvr-ms, .xvid, .mp4 Picture files .jpg, .jpeg , .gif , .png, .tif , .tiff, .yuv , .bmp Music files .
85 6 Click OK , then OK again. 7 Move the iT unes ser ver switch to the position..
86 Chapter 9 Surveillanc e Ser v er Overview The T eraStation suppor ts str eaming video from RTSP (Real Time Str eaming Pr otocol) network cameras. Getting Star ted The follo wing items are requir ed.
87 Initial Setup Installing Client T ools Download the client tools below fr om ww w .buffalotech.com and install them on your computer . Camera P olicies - Registers that a netw ork camera is connected and ready to rec ord. Live Viewer - L ets you view video as it is being r ecorded.
88 • Use the dedicated utility provided with the network camer a or other program to c onfirm that the network cam- era operates pr operly . Enable the Sur v eillanc e Camer a Enable surveillance camera in Settings. Note: F irst, complete the initial settings f or the T eraStation and the network camera.
89 8 T o enable sur v eillance cameras, change the switch t o . Notes: • If the target shared folder specified as the st orage location for r ecorded video is deleted , the sur veillanc e camera is automatically disabled. • Do not directly edit recorded video data in the shar ed storage folder .
90 T o deactivate the license, click . 5 Check that the “Sur veillanceC amera 1 camera ” and “HardDisk” were added to “Installed Licenses” . The free license is no w enabled. Registering the Rec ording P olic y of the Networ k Camer a Register the network camera that is used.
91 1 Click Star t - B UFF AL O - BUFF AL O Surveillance Ser ver - C amera P olicies . 2 Click the icon. 3 Click Next . 4 Click Find C ameras . 5 Select the detec t ed network camera, then click OK .
92 Note: Network cameras that are alr eady in use are indicated b y an asterisk (*) and they are gra y . 6 Enter the username and passwor d, then click Next . Note: Clicking T est Camer a runs an operational check of the network camera. 7 Enter the description, then click Next .
93 9 Select the T eraStation where the video will be rec orded, then click Next . 10 Check the registration inf ormation, and if it is correct, click Next .
94 An additional network camera can be regist ered by selecting “ Y es” when asked “Do you want to add an additional camera?” 12 Click Save . Recording will begin.
95 Email Error Notifica tion Y ou may configure the T eraStation to send you an email notification when the av ailable space for rec ording is low , or when recor ding fails due to a camera malfunction, network disconnection, or other cause.
96 3 The search r esults are displayed . Click a thumbnail to start the media viewer ..
97 4 Select the sec tion to export and click Expor t . This will register the video to the export queue. 5 Open the Export screen, register the export information from “Expor t Job Configur ation ” , and click Star t Expor t . The video is exported in MOV format.
98 This completes exporting video in the MOV format. V ie wing V ideo Real-time F ollow this procedur e to view the video as it is being recor ded by the network camera. Note: Live Viewer data cannot be viewed . 1 Click Star t - B UFF AL O - BUFF AL O Surveillance Ser ver - Liv e Viewer .
99 3 Click the Source tab . Under “ V ault ” , selec t the T eraSta tion where the recor ded video data is saved . Select any to migrate r ecorded data on all network -connec ted T eraStations. 4 Click the Destination tab to select which T eraStation you want t o move the data fr om “ V ault ” off of.
100 3 Click the Source tab and select the T eraStation where the r ecorded video data is sav ed under “ V ault” . Note: If any is selected, recor ded data for all T eraStations connected to the network will be backed up. 4 Click the Destination tab, then select the T eraStation where you want to mo ve the data from “ V ault ” .
101 3 Click the Source tab and select the T eraStation on which recor ded video is saved under “ V ault” . 4 Open the Criteria tab , and under “M iscellaneous Options ” , set Wat ermark: High and Watermark: L ow . F or example, the settings below delet e old data when the amount of used media space ex ceeds 80% until it drops to 40%.
102 6 Click and register the policy . This job is now set up to run at 2:00 A M Monday to F riday . Changing Where Rec or ded V ideo Is Sav ed F ollow this procedur e to change the T eraStation to which video is saved . 1 Click Star t - B UFF AL O - BUFF AL O Surveillance Ser ver - C amera P olicies .
103 Click to start the wizard where registra tion of network cameras and the recording schedule ar e per f ormed. Click to start the camera configuration screen where network cameras ar e register ed. Click to start a new registration screen f or an additional network camera.
104 Data Ser vic e P olicies Data Ser vice P olicies is a software prog ram for crea ting data ser vic e policies. The policy types that can be created ar e shown below . Note: T o use migration and duplication, an additional backup license must be pur chased.
105 Starts “Mini V ault Status ” for enabling the display of basic monitoring information. Sets the security status. Shuts down or restarts a por tion ( V ault) of the surveillance cameras. Changes the properties. Performs a diagnosis of the surveillance camera.
106 All clients and T eraStations located on the network are indicated b y and labels. These can be moved by dragging and dropping them. Clients are displa yed only when a job is being ex ecuted and activities are indicated by a line linking the client and T eraStation.
107 3 Open the License tab , then click + . If your default free license activation is not installed, see “Enabling the F ree License ” to install it. 4 Enter the product key for the lic ense pack (sold separately), then click OK . 5 Confirm that the new license was added t o “I nstalled License ” .
108 Y ou have now activat ed the additional license. T er aSta tion Not C onnec t ed to the Internet 1 If the T eraStation is being used in an envir onment where Internet access is not a vailable, a separat e computer with access to the Internet is requir ed to activate the additional license .
109 5 Open the website below in w eb browser . http://buffalo .jp/suppor t_s/camera_lic ence/ 6 F rom the license pack (sold separately), en ter the product key and host ID code and click “ Activate Sof tware License ” . 7 Downloading of the license file (*.
110 11 Open the license tab, then click +. 12 Selec t Import license file , then click Browse . 13 Selec t the license file tha t was saved bef ore, then click OK .
111 This completes authentica tion of an additional license. T roubleshooting Issue Possible C ause Possible Solution Video r ecording does not start. Surveillance Camera setting not enabled. Enable the Surveillance Camera from Settings. A LAN cable between the T eraStation and network camera is disconnected, or the power is turned off .
112 Issue Possible C ause Possible Solution There is no r ecorded data, or the recor ded data cannot be found. A camera was added in camera policies while Sur v eillance Video Manager was running. If this is the case, this video may not be accessible.
113 Chapter 10 A dvanced F eatures Email Notification Y our T eraStation can send you email reports daily, or when settings ar e changed or an error occurs.
114 Sleep Mode T o save energy , you can specify times to put the T eraStation into sleep (standby) mode, wher e the hard drive and LEDs are turned off . 1 In Settings, click Management . 2 Click the icon to the right of “Sleep Timer” . 3 Click Edit .
115 Notes: • Up to three timers can be set. • The time to enter sleep mode can be set fr om 0:00 to 3:45 of the next day . The time to wake fr om sleep mode can be set from 0:00 to 23:45. If the time to enter sleep mode is after 24:00, the wake-up time setting may be from 4:00 to 23:45.
116 W ake -on-LAN The T eraStation suppor ts Wake- on-LAN, which allows it t o be turned on remotely . 1 In Settings, click Network . 2 Click the icon to the right of “IP Address ” . 3 Click Change . 4 Enable “ W ake -on-LAN” , then click OK .
117 3 Connect the UPS and T eraStation using a USB cable or serial cable. 4 T urn on the UPS, then the T eraStation. 5 In Settings, click Management . 6 Click to the right of “Pow er ” . 7 Click Edit . 8 Configure the desir ed settings, then OK . 9 Reboot your T eraStation.
118 • Bidirectional communication is not supported i.e., remaining ink quantities and other printer sta tus information is not supported. • If a multifunctional pr int er is connected, only the printer function can be used. Other functions such as scanning will not be available.
119 2 Move the print server switch to the position to enable the print ser v er . 3 Refer to the manual supplied with the printer . 4 Click Star t - C ontrol Panel . 5 Click Network and Internet Connections . 6 Click My Network Places - View work group computers - (Name of the T eraStation Ser ver) .
120 P ow er Supply F ailure Y ou may configure the T eraStation to shut down automatically if a po wer supply fails in Management - Po wer . 1 Navigate to Management - P ow er in Settings. Choose the Pow er Supply F ailure tab . 2 Click Edit . 3 Select the number of minutes after the power supply fails to have the unit shut do wn.
121 IP Routing IP routing allows viewing and editing the r outing table. Y ou may configure it in Network - IP Routing . 1 Navigate to Network - IP Routing in Settings . The routing table will open. 2 Click Add Route . 3 Choose your rout e type, enter the necessary information, and click OK .
122 2 Browse t o the folder whose settings you wan t to change. 3 In the Hosts field, enter the hostnames or IP addresses (c omma separated) of the devices that will be able to ac cess the folder . Or , put an asterisk in the field to allo w access for ev er y one.
123 5 Click OK . 6 Click Close . 7 Click Applications . 8 Move the T eraSearch swit ch to the position to enable T eraSearch. 9 Click to the right of “ T eraSearch ” . 10 Click Refresh Index . 11 Click Edit . 12 Enter the port number that you want to use and the time that the index will be updated , then click OK .
124 Offline Files Offline files (included with many versions of W indows, can be used to ac cess files in the T eraStation, mimicking the computer’ s behavior even if it is disconnected from the network. W hen connected to the network again, the updated files are written and synchroniz ed.
125 Note: Offline files cannot be enabled if “Use F ast User S witching ” is enabled. T o change the setting, open “User Accoun ts” in Control P anel and select “Change the way users log on or off ” .
126 12 If the net w ork is disconnected after synchronization is completed, the offline file function can be used. Offline files can be accessed by the original Universal Naming C onvention (UNC) where the data was sa ved. Note: If offline files can be used, an icon appears in the system tr ay .
127 Note: If enabled, a DFS link target shared f older is created under the DFS r oot. If disabled, up to eight DFS link target shared folders can be cr eated under the DFS root. 4 Enter DFS Root F older Name . 5 Click Add Link . 6 Click Y es . 7 Enter the link name, hostname , and shared folder name , then click OK .
128 F or help configuring your NetW are , Linux, or other UNIX clients for NFS support, please consult each client’ s own documentation and support. 1 Open F older Setup . 2 Choose the shared folder tha t will be accessible to the NFS client. 3 Click Edit .
129 Notes: • T o restrict NFS access to a specific network or client, navigat e to File Sharing - NFS - Services and click Edit . Enter the address of the network. For e xample, if your local network subnet has a rout er at 192.168.1.1 and clients with IP addresses in the range from 192.
130 SSL K ey s SSL keys are used during setup screen oper ations and FTP communication. SSL (Secure Socket Layer) is a type of encryption system called public key encr yption.
131 4 Click Edit . Note: The settings of the PHP language interpr eter can be changed from “Edit php.ini” . 5 Click Browse . 6 Choose a shared folder f or the web server , then click OK . 7 Choose an external por t, then click OK . MySQL Ser v er The T eraStation can be used as a MySQL ser ver .
132 2 Click the icon to the right of “MySQL Ser ver” . 3 Click Edit . 4 Click Browse . 5 Choose a shared folder f or the MySQL ser v er , then click OK .
133 3 Click to the right of “SNMP ” . 4 Click Edit . 5 Configure the desir ed settings, then click OK . Saving and Applying Settings The T eraStation ’ s settings can be saved to a USB memory device and restored t o another T eraStation. Use this function to back up and copy settings to a new T eraStation.
134 3 Click to the right of “Restore/Erase ” . 4 F rom “ T arget USB drive” , select the USB memor y device that is connected to the USB 2.0 port of the T eraStation. 5 Select “Save current configura tion to a USB drive ” , then click Execute .
135 5 Select “ T ransfer settings fr om a USB drive ” , then click Execute . Reco vering the T eraStation Crea ting a Reco v er y Driv e A recov ery dr iv e can let you reco ver your T eraStation even if it will not boot at all. It lets you completely r einstall the operating system.
136 3 Connect a USB keyboard and a monitor to the T eraStation. 4 Po wer on the T eraStation and repeatedly hit the F7 key o ver and over , twice per second, until the boot device menu appears. 5 Select the first “USB Flash Disk” from the menu. The name of this devic e will vary depending on the brand of your USB flash drive.
137 4 Select the t ype of log that y ou want to transf er from “Logs T o T ransfer” . 5 Click OK . Notes: • Y ou can also download logs from within Settings by using either of the f ollowing hotkeys: Alt+Ctrl+Shift+b or Alt+Ctrl+Shift+l. • FTP logs cannot be written to a syslog server .
138 Note: At least 1 GB of fr ee space on the T eraStation is required to update the firm ware . T o update fr om Settings: 1 In Settings, click Management . 2 Choose Update . 3 Click Install Update . Y ou can also download the firmwar e from www.buffalot ech.
139 By default, the T eraStation adjusts its clock automatically by using a default NTP server . This NTP ser ver belongs to Internet Multi Feed Inc. F or more information, visit www.jst.mf eed.ad.jp . T o use a different NTP server , selec t Name/Time/L anguage from Management .
140 Beep Aler ts Y ou can set the T eraStation to beep when certain er r ors occur . 1 In Settings, click Management . 2 Select Notifications . 3 Click Edit . 4 Select the conditions to beep the aler t, then click OK . Jumbo F rames If your other network devices support it, you may be able to increase network performance with jumbo frames.
141 Notes: • T o use jumbo frames, your c omputer ’ s NICs and all switches, hubs, and rout ers on the network need to support jumbo frames. If any device on the netw ork does not suppor t jumbo frames , use standard frames (1500 bytes) instead. • F rame sizes smaller than 1500 bytes ar e not suppor ted .
142 Notes: • F rom the IP address list, other settings ar e available at the bottom left of the window . Click Change to modify the gateway and Wake- on-LAN settings . Click Allowed Pr otocols for each Port to restrict by LAN port which protocols network connections can use.
143 T runking Mode Characteristics X OR * T ransmits network packets based on [(sourc e MAC address X OR’ d with destination MA C address) modulo NIC slave coun t]. This selects the same NIC slave f or each destination MA C address. Broadcast T ransmits network packets on all slav e network interfaces.
144 5 Select the por t trunking mode. Some modes allow the hash policy to be configured as well. Click OK . 6 Click Save . 7 Connect the second LAN port to the switch or hub.
145 Chapter 11 Utilities NAS Naviga tor2 for Windo w s NAS Navigator2 is a utility prog ram that makes it easy to display Settings, change the T eraStation ’ s IP address, or check its hard drive . If you installed the T eraStation with the T eraNa vigator CD , NAS Navigat or2 was installed automatically .
146 Name Description Menu Map Share * Assigns the T eraSta tion ’ s shared folder as a network drive . Disconnect Share * Unmaps the network drive. Map All Remote Shares to Drive Letters Assigns all the T eraSta tion ’ s shared folders as network drives.
147 Exit Exits NAS Navigator2. The follo wing tasks may be per f ormed from the T eraStation ’ s properties page. Name Description Configuration Click Settings to open the configuration interface. IP Address Check Use DHCP to assign an IP address fr om the DHCP ser v er automatically .
148 3 An icon for the mapped shar e will appear in Computer or My Comput er . Y ou can use this network drive just like any other hard driv e. Changing the IP A ddress 1 Double -click the icon on the desktop . NAS Navigator2 will start. 2 Right-click on your T eraStation ’ s icon and choose Proper ties - IP A ddress .
149 • The follo wing IP address are reserved and should not be used. If you c onfigure one of them by accident, initializ e all settings. Local loopback address: 127.0.0.1, 255.255.255.0 Network address: 0.0.0.0, 255.255.255.0 Broadcast address: 255.
150 1 Click the icon in the Dock . NAS Navigat or2 will star t. 2 Click the T eraStation icon while holding down the control key , then selec t Open F older . Enter a username and password with the rights t o access the shared f older . 3 Select the shared folder that you wan t to mount, then click OK .
151 Chapter 12 A ppendix Replacing the Battery After appro ximately 5 years, the CR2032 ba ttery on the mother boar d will need to be replaced . Use only the correct CR2032 3 V olt lithium battery . Move the lock to the side to r elease the battery and pull it straight up to remov e.
152 3 Remove the screw and br acket from the lower slot . 4 Inser t the expansion card in the lo wer slot (not the upper slot). 5 Replace the screw . 6 F ind and connect the power connector . 7 Close the cover . 8 Reconnect the power cords . Notes: • Port trunking is not suppor ted with ports on expansion cards.
153 Emulex OCe11102-N (dual-port) OCe11102-I (dual-port) OCe11102-F (dual-port) Intel X540T2 (dual-port) E10G42BTDA (dual-port) E10G41BFSR (single -port) E10G42BFSR (dual-port) E10G41 A T2 (single -port) See our website for an upda ted list of compatible NICs.
154 5 Replace the screw . 6 F ind and connect the power connector . 7 Close the cover . 8 Reconnect the power cords . Errors Error codes can be viewed in Management - Notific ations . Error Description Corrective A ction BOOT F AIL Hard drive not f ound.
155 RAID Arrayx E14 Can ’t Mount RAID array X cannot be mounted. Run the RAID array disk check in Settings. HDx Error E16 HDx Not F ound Unable to find hard drive X. Hard drive X may be disc onnected or may have failed . After shutting down, reinstall the hard drive .
156 RAID I18 ARRA Yx Rebuilding Rebuilding RAID array x. Note: T ransfer speeds are slower during the rebuilding process . - RAID I19 ARRA Yx 0 F illing Writing 0s to RAID array x, er asing all data. - RAID I20 DISKx F ormatting F ormatting hard drive x.
157 Recovery I45 Recovery F ailed Recovery failed. - RAID ARRA Y I46 RMM+Pr ocessing Data migration or con version (RAID migration) is in prog ress. Do not turn off the T eraStation power . SYSTEM I47 Don ’t P ower Off F ailOver I49 LostMain T arget The main T eraStation in the failover configuration cannot be f ound.
158 Microsoft Network Group Name WORKGROUP Ethernet F rame Size 1500 byt es (plus 14 bytes of header and 4 bytes of FCS) AFP Enabled FTP Disabled NTP Enabled Print Server Enabled W ebAccess Disabled Time Machine Disabled T eraSearch Disabled RAID Mode The default RAID mode for 12-drive T eraStations is RAID 6.
159 Supported OS Window s 8.1 * , Windo ws 8 * , Windo ws 7 * , Windo ws Vista * , Windo ws XP * , Windo ws XP Media Center Edition (2004 or 2005), Windows Server 2012 R2, W indows Server 2012, Window s Ser ver 2008 R2, Windows Server 2008, Windows Server 2003 R2, Windo ws Ser ver 2003 OS X 10.
160 A급 기기(업무용 정보통신기기) 이 기기는 업무용(A급) 전자파적합기기로서 판매자 또는 사용자는 이 점을 주의하시기 바라며, 가정외의 지역에서 사용하는 것을 목적으로 합니다.
Un punto importante, dopo l’acquisto del dispositivo (o anche prima di acquisto) è quello di leggere il manuale. Dobbiamo farlo per diversi motivi semplici:
Se non hai ancora comprato il Buffalo TeraStation TS7120r Enterprise è un buon momento per familiarizzare con i dati di base del prodotto. Prime consultare le pagine iniziali del manuale d’uso, che si trova al di sopra. Dovresti trovare lì i dati tecnici più importanti del Buffalo TeraStation TS7120r Enterprise - in questo modo è possibile verificare se l’apparecchio soddisfa le tue esigenze. Esplorando le pagine segenti del manuali d’uso Buffalo TeraStation TS7120r Enterprise imparerai tutte le caratteristiche del prodotto e le informazioni sul suo funzionamento. Le informazioni sul Buffalo TeraStation TS7120r Enterprise ti aiuteranno sicuramente a prendere una decisione relativa all’acquisto.
In una situazione in cui hai già il Buffalo TeraStation TS7120r Enterprise, ma non hai ancora letto il manuale d’uso, dovresti farlo per le ragioni sopra descritte. Saprai quindi se hai correttamente usato le funzioni disponibili, e se hai commesso errori che possono ridurre la durata di vita del Buffalo TeraStation TS7120r Enterprise.
Tuttavia, uno dei ruoli più importanti per l’utente svolti dal manuale d’uso è quello di aiutare a risolvere i problemi con il Buffalo TeraStation TS7120r Enterprise. Quasi sempre, ci troverai Troubleshooting, cioè i guasti più frequenti e malfunzionamenti del dispositivo Buffalo TeraStation TS7120r Enterprise insieme con le istruzioni su come risolverli. Anche se non si riesci a risolvere il problema, il manuale d’uso ti mostrerà il percorso di ulteriori procedimenti – il contatto con il centro servizio clienti o il servizio più vicino.
