Manuale d’uso / di manutenzione del prodotto 5900692 del fabbricante Briggs & Stratton
Vai alla pagina of 19
7/2007 1 5101092 Rev No. 02 TP 300-7333-02-M2-SP Dealer Setup & Adjustment Instructions S200X - 25HP , 27HP & 32HP 61” & 72” Mower Deck T ABLE OF CONTENTS: SETUP PROCEDURES Quick Setup List .............................................
S200X 25HP & 27HP - 61” Mower Dec k TP 300-7333-02-M2-SP 7/2007 2 Quick Setup List - P age Setup Procedure Steps to P erform 3 Uncrating ❏ Remov e Crate & Banding. ❏ Loosen Hydraulic Release V alv es. ❏ Release P arking Brake and Roll T r actor forw ard off skid.
S200X 25HP & 27HP - 61” Mower Dec k 7/2007 3 TP 300-7333-02-M2-SP Uncrating 1. Using a reciprocating utility saw or equivalent, cut crate away from bottom skid. Remove crate. Remove shrink-wrap plastic. 2. Cut nylon banding from front of the frame and rear rear bumper.
S200X 25HP & 27HP - 61” Mower Dec k TP 300-7333-02-M2-SP 7/2007 4 T ractor Assembl y Motion Contr ol Handle Assembly 1. Remove the handles and mounting hardware from the handle bar box.
S200X 25HP & 27HP - 61” Mower Dec k 7/2007 5 TP 300-7333-02-M2-SP Roll Bar Installation Install the Roll Bar 1. Unpack the roll bar and hardware from the box. 2. Place the roll bar in to the roll bar pockets (A, Figure 6) on the frame. Refer to Figure 7 for the correct roll bar orientation.
S200X 25HP & 27HP - 61” Mower Dec k TP 300-7333-02-M2-SP 7/2007 6 Chec k Fluid Le vels Chec k the Engine Oil Level 1. Use the dipstick (A, Figure 8) to check the engine oil level. If necessary add engine oil. Check the engine manufacturer’s owner’s manual for the oil recommendations.
S200X 25HP & 27HP - 61” Mower Dec k 7/2007 7 TP 300-7333-02-M2-SP Chec k the Mower Assembl y Chec k T or que - Mower Blades 1. Park the machine on a flat, level surface and engage the parking brake. 2. Lock the deck lift pedal in the 5” (12,7 cm) position.
S200X 25HP & 27HP - 61” Mower Dec k TP 300-7333-02-M2-SP 7/2007 8 Install the Mo wer Deck (72” Models) 1. Park machine on a flat, level surface and engage the parking brake.
S200X 25HP & 27HP - 61” Mower Dec k 7/2007 9 TP 300-7333-02-M2-SP Chec k Deck Rod Timing 1. Park machine on a flat, level surface. Disengage the PTO, stop the engine and engage the parking brake. Rear tires must be inflated to 15 psi (1,03 bar); front tires to 25 psi (1,72 bar).
S200X 25HP & 27HP - 61” Mower Dec k TP 300-7333-02-M2-SP 7/2007 10 Figure 18. 2 x 4 Locations Figure 19. Hanger Chain Adjustment Dec k Leveling Adjustment NOTE: Before adjusting the deck level, the deck lift rod timing must be checked and/or adjusted.
S200X 25HP & 27HP - 61” Mower Dec k 7/2007 11 TP 300-7333-02-M2-SP Chec k Deck Drive Belt 1. Lower the mower deck to its lowest cutting position. 2. Remove the mower deck guards. 3. Make sure the V-side of the belt runs in the pulley grooves (Figures 21 & 22).
S200X 25HP & 27HP - 61” Mower Dec k TP 300-7333-02-M2-SP 7/2007 12 Lubrication Lubricate the unit at the locations shown in Figure 25 through 28 as well as the following lubrication points.
S200X 25HP & 27HP - 61” Mower Dec k 7/2007 13 TP 300-7333-02-M2-SP Figure 29. Adding Fuel A. Fuel Cap A Adding Fuel To add fuel: 1. Remove the fuel cap (see A, Figure 29). 2. Fill the tank to about 1-1/2” (3,81 cm) of the bottom of the filler neck.
S200X 25HP & 27HP - 61” Mower Dec k TP 300-7333-02-M2-SP 7/2007 14 P erf orm the Safety Chec ks Functional T ests 1. Check the tractor for loose bolts, screws, nuts, etc. 2. Start the engine and check all the controls for proper operation: ground speed control levers, parking brake, throttle cable, electric PTO clutch, etc.
S200X 25HP & 27HP - 61” Mower Dec k 7/2007 15 TP 300-7333-02-M2-SP Adjustment Pr ocedures Seat Adjustment See Figure 30. The seat can be adjusted forward and backward. Move the lever forward, position the seat as desired, and release the lever to lock the seat into position.
S200X 25HP & 27HP - 61” Mower Dec k TP 300-7333-02-M2-SP 7/2007 16 Motion Contr ol Handle Adjustment The control levers can be adjusted in three ways. The alignment of the control levers, the placement of the levers (how close the ends are to one another) and the height of the levers can be adjusted.
S200X 25HP & 27HP - 61” Mower Dec k 7/2007 17 TP 300-7333-02-M2-SP Return-T o-Neutral & Neutral Adjustment RETURN-TO-NEUTRAL ADJUSTMENT To determine if it is necessary to adjust the neutral return, perform the following steps. 1. Disengage the PTO, engage the parking brake and turn off the engine.
S200X 25HP & 27HP - 61” Mower Dec k TP 300-7333-02-M2-SP 7/2007 18 Figure 35. Parking Brake Adjustment A. Brake Spring B. Adjustment Nut P arking Brake Adjustment 1. Disengage the PTO, engage the parking brake, stop the engine and remove the ignition key.
Briggs & Stratton Yard Power Products Group Copyright © 2007 Briggs & Stratton Corporation Milwaukee, WI, USA. All rights reserved. The Snapper Pro logo is a trademark of Briggs & Stratton Corporation Milwaukee, WI, USA. Contact Information: Briggs & Stratton Yard Power Products Group 5375 N.
Un punto importante, dopo l’acquisto del dispositivo (o anche prima di acquisto) è quello di leggere il manuale. Dobbiamo farlo per diversi motivi semplici:
Se non hai ancora comprato il Briggs & Stratton 5900692 è un buon momento per familiarizzare con i dati di base del prodotto. Prime consultare le pagine iniziali del manuale d’uso, che si trova al di sopra. Dovresti trovare lì i dati tecnici più importanti del Briggs & Stratton 5900692 - in questo modo è possibile verificare se l’apparecchio soddisfa le tue esigenze. Esplorando le pagine segenti del manuali d’uso Briggs & Stratton 5900692 imparerai tutte le caratteristiche del prodotto e le informazioni sul suo funzionamento. Le informazioni sul Briggs & Stratton 5900692 ti aiuteranno sicuramente a prendere una decisione relativa all’acquisto.
In una situazione in cui hai già il Briggs & Stratton 5900692, ma non hai ancora letto il manuale d’uso, dovresti farlo per le ragioni sopra descritte. Saprai quindi se hai correttamente usato le funzioni disponibili, e se hai commesso errori che possono ridurre la durata di vita del Briggs & Stratton 5900692.
Tuttavia, uno dei ruoli più importanti per l’utente svolti dal manuale d’uso è quello di aiutare a risolvere i problemi con il Briggs & Stratton 5900692. Quasi sempre, ci troverai Troubleshooting, cioè i guasti più frequenti e malfunzionamenti del dispositivo Briggs & Stratton 5900692 insieme con le istruzioni su come risolverli. Anche se non si riesci a risolvere il problema, il manuale d’uso ti mostrerà il percorso di ulteriori procedimenti – il contatto con il centro servizio clienti o il servizio più vicino.
