IT
Addonics Technologies logo
Manuale d'uso ufficiale

Addonics Technologies CA256USB

6 pagine·827 KB·Unità ottica per computer·PDF·EN
Addonics Technologies CA256USB
Indice dei contenuti 4 sezioni User Guide · CipherUSB · (CA256USB) · CONTACT US MostraNascondi
Page 1 of the Addonics Technologies CA256USB user manual — (CA256USB)
Pagina 1 · clicca per ingrandire
Pagina 1

T E C H N O L O G I E S

Addonics Technologies CA256USB — User Guide diagram (page 1)
Fig. 1 · User Guide

User Guide

CipherUSB

(CA256USB)

v3.1.11 www.addonics.com

Technical Support If you need any assistance to get your unit functioning properly, please have your product information ready and contact Addonics Technical Support at:

Hours8:30 am - 6:00 pm PST Phone: 408-453-6212 Email: http://www.addonics.com/support/query/
Page 2 of the Addonics Technologies CA256USB user manual — User Guide
Pagina 2 · clicca per ingrandire
Pagina 2

This procedure only needs to be done when setting up the CipherUSB for the first time, or when a new password is desired. The CipherUSB will retain the last password it was programmed with and otherwise does not require any driver or software to work.

1. Connect the CipherUSB to a computer running Windows, and connect a USB storage device into the CipherUSB. The CipherUSB will not respond until a working storage device is connected to its USB device port.
2. Run the program CipherUSB.exe. The following dialog box should appear:
Addonics Technologies CA256USB — User Guide diagram (page 2)
Fig. 2 · User Guide
3. Click OK to proceed to the utility. Choose a password as short or as long (up to 32 characters) as desired, and enter it into the “Setup” and “Confirm” fields. Then click Start.

www.addonics.com Technical Support (M-F 8:30am - 6:00pm PST) Phone: 408-453-6212 Email: www.addonics.com/support/query/

Initial Setup

Page 3 of the Addonics Technologies CA256USB user manual — User Guide
Pagina 3 · clicca per ingrandire
Pagina 3
Addonics Technologies CA256USB — User Guide diagram (page 3)
Fig. 3 · User Guide

After confirming once more for security, the CipherUSB will be programmed with a 256-bit encryption key seeded by the pass- word. Once the CipherUSB has been programmed, a dialog will appear instructing you to remove the device and reinsert it, then the program will close automatically. After removing and reinserting the CipherUSB it will be properly initialized.

www.addonics.com Technical Support (M-F 8:30am - 6:00pm PST) Phone: 408-453-6212 Email: www.addonics.com/support/query/

Page 4 of the Addonics Technologies CA256USB user manual — User Guide
Pagina 4 · clicca per ingrandire
Pagina 4

Using the CipherUSB With Storage

Data that is encrypted will only be readable when the device is connected to a computer through a CipherUSB programmed with the correct password. When a device is connected through a CipherUSB, unencrypted data or data that is encrypted using a CipherUSB programmed with a different password will not be readable.

For hard drives and flash media devices, all sectors written including the boot record and file system are encrypted by CipherUSB. For optical media, individual sessions are encrypted and will be unreadable without a correct CipherUSB. This means optical discs may be either entirely encrypted or created with multiple sessions, with and without encryption.

Addonics Technologies CA256USB — User Guide diagram (page 4)
Fig. 4 · User Guide

www.addonics.com Technical Support (M-F 8:30am - 6:00pm PST) Phone: 408-453-6212 Email: www.addonics.com/support/query/

Updating Firmware

Page 5 of the Addonics Technologies CA256USB user manual — User Guide
Pagina 5 · clicca per ingrandire
Pagina 5

1. Read the firmware update for important changes to the unit's operation or the update procedure. If a firmware release note contradicts these instructions, follow the release notes instead. 2. Insert the CipherUSB with a storage device. The CipherUSB will not respond unless a storage device is attached to it. 3. Run the CipherUSB.exe program. If the CipherUSB unit has not been initialized with a password, the Update Firmware tab will not appear. Initialize the unit with a password, unplug it, plug it back in, then select the Update Firmware tab. 4. Be sure the DX Information section shows AES Length is 256 and ECB mode is selected. 5. In the Update new firmware section, click the Firmware button. Change the file type to “BinaryFile(*.256) if neces sary, then browse to the folder containing the new firmware and open it. 6. Click the Start Programming button. A dialog will shortly appear instructing you to remove the CipherUSB and reinsert it. After removing and reinserting the device, the firm ware update will be completed.

www.addonics.com Technical Support (M-F 8:30am - 6:00pm PST) Phone: 408-453-6212 Email: www.addonics.com/support/query/

Page 6 of the Addonics Technologies CA256USB user manual — www.addonics.com Phone: 408-573-8580 Fax: 408-573-8588 Email: http://www.addonics.com/sales/query/
Pagina 6 · clicca per ingrandire
Pagina 6

CONTACT US

www.addonics.com Phone: 408-573-8580 Fax: 408-573-8588 Email: http://www.addonics.com/sales/query/

Fonti

Riferimenti e link

Pagine di riferimento in questo manuale: produttore, supporto e download.

Fai una domanda su Addonics Technologies CA256USB

I possessori del prodotto e il nostro team di solito rispondono entro 24 ore, e la tua domanda sarà utile anche ad altri.

Add your email to get notified when it’s answered — no spam, ever.

0 questions
Nessuna domanda ancora per il dispositivo Addonics Technologies CA256USB

Invia la prima domanda: risponderanno altri possessori o il nostro team.

Documento originale

Addonics Technologies CA256USB manuale in PDF

6 pagine·827 KB·Unità ottica per computer·PDF
Clicca su qualsiasi pagina in alto per aprirla qui
Pagina 1 / …
100%
Caricamento pagine…