
T E C H N O L O G I E S

v7.1.11
Technical Support If you need any assistance to get your unit functioning properly, please have your product information ready and contact Addonics Technical Support at:

Mode switch (M1 or M2)

eSATA port 5V power connector
I. Setting up the device in eSATA mode a. Connect USB power cable from PC to the eSATA /
USB DigiDrive. b. Attach eSATA cable from eSATA / USB DigiDrive
to the PC eSATA port. The tables show drive icon and media detection behavior basing on the mode switch setting and the type of eSATA port the eSATA / USB DigiDrive is connected to. M1 mode – force flash media to become Fixed disk


www.addonics.com Technical Support (M-F 8:30am - 6:00pm PST) Phone: 408-453-6212 Email: www.addonics.com/support/query/
Mini USB port

II. Setting up the device in USB Mode a. Attach mini USB cable from eSATA / USB
DigiDrive to USB port on PC. b. The drive icon appears only when flash media is
inside the eSATA / USB DigiDrive.The drive icon will disappear and reappear during media change.
Media Priority When more than one media is inside the eSATA / USB DigiDrive during bootup, the media that gets detected first is according to the priority shown below
www.addonics.com Technical Support (M-F 8:30am - 6:00pm PST) Phone: 408-453-6212 Email: www.addonics.com/support/query/

www.addonics.com Phone: 408-573-8580 Fax: 408-573-8588 Email: http://www.addonics.com/sales/query/
Pagine di riferimento in questo manuale: produttore, supporto e download.
I possessori del prodotto e il nostro team di solito rispondono entro 24 ore, e la tua domanda sarà utile anche ad altri.
Invia la prima domanda: risponderanno altri possessori o il nostro team.